HoistFitness | CF-3753 | Owner Manual | HoistFitness CF-3753 Owner Manual

HoistFitness CF-3753 Owner Manual
OWNER'S MANUAL
CF-3753
7 DEGREE SMITH
**WARNING!**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR USING MINIMUM 4 - 1/2" LONG BOLTS.
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH.
Note: Both Serial Number and Model Number are Required when Ordering Parts
RECORD SERIAL NUMBER HERE
Customer Service
MACHINE CODE
(800) 548-5438
(858) 578-7676
Fax
A09
(858) 578-9558
OWNER'S MANUAL
CONTENTS
INSTRUCTIONS ..................................................................... 02
FRAME ASSEMBLY .............................................................. 04
PRE-ASSEMBLY.................................................................... 23
DECAL PLACEMENT............................................................. 27
DECAL REFERENCE............................................................. 28
PART LIST............................................................................... 29
ABBREVIATIONS................................................................... 32
BOLT SIZING CHART............................................................ 33
WASHER SIZING CHART...................................................... 34
MAINTENANCE SCHEDULE................................................. 36
GENERAL MAINTENANCE INFORMATION........................ 37
WEIGHT TRAINING TIPS....................................................... 38
WEIGHT RATIOS.................................................................... 39
EXERCISE LOG...................................................................... 40
LIMITED WARRANTY............................................................ 41
PAGE 01
CF-3753 ASSEMBLY
OWNER'S MANUAL
INSTRUCTIONS
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
TOOLS REQUIRED
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
2 People Required For Assembly
CF-3753 ASSEMBLY
PAGE 02
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 03
CF-3753 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
CF-3753 ASSEMBLY
PAGE 04
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
29
10
MAKE SURE DECALS FACE
OUTWARD, AS SHOWN
64
66
47
PAGE 05
CF-3753 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
WARNING!
BE SURE TO ALWAYS SUPPORT UPRIGHT (1) THROUGH THE FOLLOWING STEPS
UNTIL ASSEMBLY IS SECURED ON PAGE 10.
FAILURE TO FOLLOW THESE DIRECTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE
UPRIGHT.
- SOME PARTS HAVE BEEN
REMOVED FOR CLARITY.
60
62
29
LEFT SIDE SHOWN
1
62
70
MAKE SURE SIDE WITH BOLT
HEADS FACES OUT, AS SHOWN
18
CF-3753 ASSEMBLY
PAGE 06
OWNER'S MANUAL
FRAME ASSEMBLY
WARNING!
BE SURE TO ALWAYS SUPPORT UPRIGHT (1) THROUGH THE FOLLOWING STEPS
UNTIL ASSEMBLY IS SECURED.
FAILURE TO FOLLOW THESE DIRECTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.
20
14
NOTE:
- HAND TIGHTEN HARDWARE.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE
UPRIGHT.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
69
63
24
24
1
63
56
69
63
63
54
55
63
20
CABLE MAY COME
PRE-ASSEMBLED
63
69
LEFT SIDE SHOWN
14
98 1/8" 2492.36
PAGE 07
CF-3753 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
WARNING!
BE SURE TO ALWAYS SUPPORT UPRIGHT (1) THROUGH THE FOLLOWING STEP.
FAILURE TO FOLLOW THESE DIRECTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE
UPRIGHT.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
81
IMPORTANT
ONLY HAND TIGHTEN BOLTS (81) AS THEY
WILL BE REMOVED FOR INSTALLATION
OF CROSSMEMBER (80) ON PAGE 10
62
34
62
70
CUT-OFF THE ZIP TIE
TO POSITION CABLE
AS SHOWN
14
BE SURE TO POSITION
CABLE (14) AROUND PULLEY
AND THROUGH SLOT IN
UPRIGHT (1), AS SHOWN
20
2
14
1
LEFT SIDE SHOWN
1
17
CF-3753 ASSEMBLY
PAGE 08
OWNER'S MANUAL
FRAME ASSEMBLY
WARNING!
BE SURE TO ALWAYS SUPPORT UPRIGHTS (1) THROUGH THIS STEP.
FAILURE TO FOLLOW THESE DIRECTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
11
70
62
59
62
62
70
2
2
1
1
LEFT SIDE
RIGHT SIDE
PAGE 09
CF-3753 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
WARNING!
BE SURE TO ALWAYS SUPPORT UPRIGHTS (1) THROUGH THIS STEP.
FAILURE TO FOLLOW THESE DIRECTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
IMPORTANT
REMOVE BOLTS (81) THAT WERE INSTALLED ON PAGE 8
AND REINSTALL THROUGH CROSSMEMBER (80).
ENSURE CROSSMEMBERS AND UPRIGHTS ARE
PROPERLY SUPPORTED.
11
2
2
1
80
70
62
62
81
81
1
62
62
70
CF-3753 ASSEMBLY
PAGE 10
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 11
CF-3753 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
54
65
63
25
4
37
38
5
BAR ASSEMBLY MAY
COME PRE-ASSEMBLED
38
37
4
25
63
65
54
CF-3753 ASSEMBLY
PAGE 12
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- USE RACK OUT'S (29) THIRD NOTCH
FROM TOP TO STABILIZE BAR (4 & 5)
FOR NEXT STEP.
- USE RACK OUT'S (29) SIXTH NOTCH
FROM TOP TO POSITION SAFETY CATCH
(8 & 9) FOR NEXT STEP.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
29
THIRD NOTCH
29
4
SIXTH NOTCH
5
9
4
1
8
1
PAGE 13
CF-3753 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- CAREFULLY INSTALL SHAFT (22) INTO
(4) AS SHOWN, AND BE SURE NOT
TO DAMAGE THE BEARINGS.
- CONTINUE TO INSERT SHAFT (22)
THRU BUSHINGS OF (7) AS SHOWN.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
22
22
PROPERLY INSTALLED VIEW
22
4
4
9
22
7
7
1
8
7
9
CF-3753 ASSEMBLY
PAGE 14
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- REPEAT FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
3
1
22
14
PAGE 15
CF-3753 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
4X
53
65
63
3
14
4X 53
CF-3753 ASSEMBLY
65
63
PAGE 16
OWNER'S MANUAL
FRAME ASSEMBLY
45
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
61
PROPERLY INSTALLED VIEW
62
3
14
BE SURE CABLE (14) IS POSITIONED
AROUND PULLEY AND THROUGH
HOUSING (3), AS SHOWN.
PAGE 17
CF-3753 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
14
69
63
63
54
14
54
63
4
63
DETAIL VIEWS
CABLE TO BAR ATTACHMENT
69
4
CF-3753 ASSEMBLY
PAGE 18
OWNER'S MANUAL
FRAME ASSEMBLY
WARNING!
ONCE HARDWARE IS REMOVED, COUNTERWEIGHT IS FREE TO FALL.
BE SURE TO FULLY SUPPORT COUNTERWEIGHT BEFORE AND DURING HARDWARE REMOVAL.
ONCE HARDWARE IS REMOVED, SAFELY MOVE COUNTERWEIGHT TO RESTING POSITION AT
BOTTOM OF UPRIGHT.
NOTE:
- REPEAT DISASSEMBLY FOR OPPOSITE
SIDE UPRIGHT. REMOVE HARDWARE
TO RELEASE COUNTERWEIGHT
FROM SHIPPING POSITION.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
1
79
79
79
79
PAGE 19
CF-3753 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE
UPRIGHT.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
30
1
46
66
64
64
66
46
CF-3753 ASSEMBLY
PAGE 20
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE
UPRIGHT.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
2
58
TO POSITION (6) PROPERLY,
FOLLOW THIS STEP AS SHOWN
6
62
2
6
1
62
70
1
17 1/2"
59
62
70
62
PAGE 21
CF-3753 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- WRENCH TIGHTEN ALL HARDWARE FROM
PREVIOUS STEPS.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY
* IF MACHINE WAS PURCHASED PREASSEMBLED, REMOVE COUNTER-WEIGHT
RETAINING PULL-PINS (79) NOW.
85
65
63
84
2
16
83
27
27
83
*
79
*
79
28
16
52
67
63
82
*
79
84
63
65
85
*IMPORTANT*
NOW THAT THE CF-3753 IS COMPLETELY ASSEMBLED TAKE TIME TO
ASSURE THAT YOUR UNIT IS ASSEMBLED SQUARE AND PERPENDICULAR. USE A LEVEL
TO CHECK THAT THE GUIDE RODS ARE PERPENDICULAR IN BOTH DIRECTIONS.
IF THEY ARE NOT PERPENDICULAR IN BOTH DIRECTIONS, IT WILL BE NECESSARY TO
LOOSEN SOME FRAME HARDWARE TO RE-ALIGN THE FRAME AND RETIGHTEN BOLTS.
CF-3753 ASSEMBLY
PAGE 22
OWNER'S MANUAL
PRE-ASSEMBLY
35
38
69
35
63
41
63
51
5
51
69
63
63
41
63
41
69
63
51
35
51
38
63
35
63
69
41
PAGE 23
CF-3753 ASSEMBLY
OWNER'S MANUAL
PRE-ASSEMBLY
36
42
69
63
39
36
39
33
42
39
4
57
39
57
42
63
69
36
42
36
4
44
50
7
39
65
33
69
63
41
63
51
51
70
41
63
62
63
43
69
44
44
49
43
9
67
31
32
32
50
31
67
49
65
39
8
43
7
44
CF-3753 ASSEMBLY
43
62
70
PAGE 24
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 25
CF-3753 ASSEMBLY
OWNER'S MANUAL
PRE-ASSEMBLY
68
64
40
15
40
64
2X
48
26
1
64
47
79
21
79
79
79
68
64
13
CF-3753 ASSEMBLY
PAGE 26
OWNER'S MANUAL
DECAL PLACEMENT
NOTE:
- ALL DECALS ARE CENTERED
UNLESS OTHERWISE STATED.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
76
74
77
78
77
71
75
73
75
72
71
PAGE 27
CF-3753 ASSEMBLY
OWNER'S MANUAL
DECAL REFERENCE
021-0003626
021-0003113
SERIAL # DECAL
021-0003597
021-0003135
021-0003008
021-0003593
021-0003221
CF-3753 ASSEMBLY
PAGE 28
OWNER'S MANUAL
PART LIST
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
PART NUMBER
1
026-01X2997
2
026-01X2999
3
026-01X3004
4
026-01X5061
5
026-01X5060
6
026-01X3184
7
026-01X3186
8
026-01X3205
9
026-01X3206
10
026-01X3207
11
026-01X3245
13
026-01X3252
14
010-01C0601
15
026-01PL2225
16
026-01PL2533
17
026-01PL2211
18
026-01PL2407
20
018-0001002
21
019-0001001
22
026-01G0216
24
026-01M0762
25
026-01M1047
26
026-01M2252
27
026-01X6692
28
026-01X6679
29
026-01P3154
30
026-01P6101
31
026-01PL2154
32
026-01PL2155
33
026-01PL2203
34
026-01PL2229
35
014-0015032
PAGE 29
DESCRIPTION
FRONT UPRIGHT ASSEMBLY
REAR UPRIGHT ASSEMBLY
GUIDE ROD HOUSING ASSEMBLY
BAR SUPPORT ASSEMBLY
OLYMPIC BAR
BOTTOM TIE ASSEMBLY
SAFETY CATCH GUIDE
SAFETY CATCH, RIGHT
SAFETY CATCH, LEFT
CAM FOLLOWER GUIDE
CROSSMEMBER, UPPER
COUNTERWEIGHT GUIDE
CABLE ASSEMBLY CF-3753 - 98 1/8" LG.
V GROOVE WHEEL
RUBBER DONUT FOR PLASTIC WEIGHT HORN
RUBBER FOOT
RUBBER FOOT
CABLE PULLEY: Ø3.50"
PLUG BUMPER
30MM SHAFT X 82.28" LG.
HEAVY FLANGED SPACER: Ø.39" I.D. X 1.50" LG.
BAR END
COUNTERWEIGHT, 49 LBS
CF-3753 & CF-3754 2 SIDED WT. HORN
CF-3753 & CF-3754 1 SIDED WT. HORN
RACK OUT PLATE
SHIELD
PLASTIC KNOB: BASE 1.00" ID
PLASTIC KNOB: CAP 1.00" ID
WEIGHT HORN RUBBER DONUT
CHANNEL CAP
SNAP RING: Ø1.38" EXTERNAL
QTY.
2
2
2
2
1
2
2
1
1
2
1
2
2
8
10
2
2
4
2
2
4
2
2
4
2
2
2
2
2
2
2
4
CF-3753 ASSEMBLY
OWNER'S MANUAL
PART LIST CONTINUED
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
PART NUMBER
36
014-0023010
37
014-0006006
38
014-0006007
39
014-0012012
40
014-0003008
41
014-0104003
42
014-0007011
43
014-0101002
44
014-0416001
45
011-0116108
46
011-0701001
47
011-0701002
48
011-0116180
49
011-0701020
50
011-0701021
51
011-0701024
52
011-0701026
53
011-0116141
54
011-0116143
55
011-0116146
56
011-0116158
57
011-0702005
58
011-0116121
59
011-0116123
60
011-0116126
61
013-1010001
62
013-1002006
63
013-1002007
64
013-1002010
65
013-1006003
66
013-1010003
67
013-1010002
68
012-0504006
69
012-0504005
70
012-0504002
CF-3753 ASSEMBLY
DESCRIPTION
SNAP RING: Ø47mm INTERNAL
BEARING: 25MM NEEDLE BEARING
BEARING:35MM NEEDLE BEARING W/INNER RING
BEARING: BALL BEARING,
.39" I.D.
BEARING: 608-2RS BEARING (8mm BORE)
BEARING: CAGE GUIDED NEEDLE ROLLER
BEARING 30MM (LINEAR) (WON)
BUSHING: OILITE FLANGED Ø.75" O.D X Ø.50" I.D X .38" LG.
BUSHING: NYLON FLANGED 1.22" I.D. X .75" O.D. X .81" LG.
1/2"-13UNC X 1.25" LOW HEAD SHCS (Ni)
5/16"-18UNC X .5" BHCS (Ni)
5/16"-18UNC X .75" BHCS (Ni)
5/16"-18UNC X 2.50" LOW HEAD SHCS (Ni)
3/8"-16UNC X 1.00" BHCS (Ni)
3/8"-16UNC X 1.25" BHCS (Ni)
3/8"-16UNC X 2.00" BHCS (Ni)
3/8"-16UNC X 2.50" BHCS (Ni)
3/8"-16UNC X .75" LOW HEAD SHCS (Ni)
3/8"-16UNC X 1.25" LOW HEAD SHCS (Ni)
3/8"-16UNC X 2.00" LOW HEAD SHCS (Ni)
3/8"-16UNC X 5.00" LOW HEAD SHCS (Ni)
3/8"-16UNC X 1.50" FHCS (Ni)
1/2"-13UNC X 4.50" LOW HEAD SHCS (Ni)
1/2"-13UNC X 5.00" LOW HEAD SHCS (Ni)
1/2"-13UNC X 5.75" LOW HEAD SHCS (Ni)
1/2" INTERNAL LOCK WASHER (Ni)
1/2" X 27mm SAE FLAT WASHER (Ni)
3/8" X 22mm FLAT WASHER (Ni)
5/16" SAE FLAT WASHER (Ni)
3/8" SPLIT LOCK WASHER (Ni)
5/16" INTERNAL LOCK WASHER (Ni)
3/8" INTERNAL LOCK WASHER (Ni)
5/16"-18UNC THIN NYLOCK NUT (Ni)
3/8"-16 UNC THIN NYLOCK NUT (Ni)
1/2"-13 UNC THIN NYLOCK NUT (Ni)
QTY.
4
2
2
6
16
6
4
4
4
2
16
20
8
2
2
6
6
8
6
2
2
2
4
8
12
2
60
56
64
22
24
8
20
16
30
PAGE 30
OWNER'S MANUAL
PART LIST CONTINUED
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
PART NUMBER
71
021-0003626
72
021-0003135
73
021-0003008
74
021-0003597
75
021-0003593
76
021-0003221
77
021-0003113
78
SERIAL # DECAL
79
026-01X2856+CLIP
80
026-01X5955
81
011-0116125
82
016-0201023
83
026-01PL2532
84
026-01PL2535
85
011-0701084
PAGE 31
DESCRIPTION
DECAL WEAR STRIP (BLACK) 1.50" X 72.00" X 30 MIL
DECAL WARNING 1.50" X 6.69"
DECAL COMMERCIAL MAINTENANCE 1.50 X 6.69
DECAL DANGER SAFETY STOP 3.25" X 12" VERT
DECAL DANGER 3.88" X .87" (HORIZONTAL)
DECAL HOIST 2.50" X 9.13"
DECAL PINCH POINT 1.63" X 3.25" (VERTICAL)
DECAL HOIST SERIAL # 1.63" X 2.63"
WEIGHT SELECTOR PIN
CROSSMEMBER
1/2"-13UNC X 5.50" LOW HEAD SHCS (Ni)
END CAP 1.50" (BLACK)
LONG WEIGHT HORN COVER
WEIGHT HORN END CAP
3/8"-16UNC X 1.25" BHCS (Ni) W/ DRI-LOC PATCH
QTY.
2
1
1
1
2
1
2
1
2
1
4
2
10
10
10
CF-3753 ASSEMBLY
OWNER'S MANUAL
ABBREVIATIONS
BZ = Black Zinc
Ni = Nickel Plated
SS = Stainless Steel
WZ = White Zinc
HHB = Hex Head Bolt
FHCS = Flat Head Cap Screw
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
Low Head SHCS = Low Head Socket
Head Cap Screw
SHSS = Socket Head Shoulder Screw
CF-3753 ASSEMBLY
PAGE 32
OWNER'S MANUAL
BOLT SIZING CHART
5/16" HHB
3/8" BHCS
RECOMMENDED
TORQUE RANGE:
9-12 ft-lbs
RECOMMENDED
TORQUE RANGE:
18-23 ft-lbs
5/16" SHCS
3/8" SHCS
PAGE 33
4 3/4"
4 1/2"
4 1/4"
4"
3 3/4"
3 1/2"
3 1/4"
3"
2 3/4"
2 1/2"
2 1/4"
2"
1 1/2"
1 1/4"
1"
1 3/4"
5/16" SHSS
5 1/2"
RECOMMENDED
TORQUE RANGE:
47-65 ft-lbs
RECOMMENDED
TORQUE RANGE:
19-26 ft-lbs
RECOMMENDED
TORQUE RANGE:
8-10 ft-lbs
5 1/4"
3 1/4"
3"
2 3/4"
2 1/2"
2 1/4"
2"
1 3/4"
1 1/2"
1 1/4"
1"
3/4"
3/4"
0"
1/4" SHSS
1/2" FHCS
3/8" FHCS
1/4" FHCS
5"
RECOMMENDED
TORQUE RANGE:
39-49 ft-lbs
RECOMMENDED
TORQUE RANGE:
23-29 ft-lbs
RECOMMENDED
TORQUE RANGE:
5-7 ft-lbs
RECOMMENDED
TORQUE RANGE:
3-4 ft-lbs
RECOMMENDED
TORQUE RANGE:
40-50 ft-lbs
4 3/4"
1/4" SHCS
RECOMMENDED
TORQUE RANGE:
11-14 ft-lbs
1/2"
LOW HEAD
SHCS
4 1/2"
RECOMMENDED
TORQUE RANGE:
4-6 ft-lbs
3/8"
LOW HEAD
SHCS
4 1/4"
5/16"
LOW HEAD
SHCS
RECOMMENDED
TORQUE RANGE:
47-65 ft-lbs
4"
1/4"
LOW HEAD
SHCS
1/2" BHCS
RECOMMENDED
TORQUE RANGE:
19-26 ft-lbs
3 3/4"
RECOMMENDED
TORQUE RANGE:
11-15 ft-lbs
1/2" HHB
RECOMMENDED
TORQUE RANGE:
60-75 ft-lbs
RECOMMENDED
TORQUE RANGE:
24-30 ft-lbs
5/16" BHCS
1/4" BHCS
RECOMMENDED
TORQUE RANGE:
5-7 ft-lbs
0"
3/8" HHB
RECOMMENDED
TORQUE RANGE:
14-17 ft-lbs
3 1/2"
1/4" HHB
RECOMMENDED
TORQUE RANGE:
6-8 ft-lbs
3/8" SHSS
RECOMMENDED
TORQUE RANGE:
17-22 ft-lbs
CF-3753 ASSEMBLY
OWNER'S MANUAL
WASHER SIZING CHART
013-0002003
1/4"
FLAT WASHER
SMALL, SAE, 13mm
013-0102028
3/8"
CURVED WASHER
013-0102004
5/16"
FLAT WASHER
LARGE, USS, 22mm
013-0002004
3/8"
FLAT WASHER
SMALL, SAE, 21mm
013-0402007
3/8"
FLAT WASHER
22mm O.D.
013-0102019
1/4"
LOCK WASHER
026-01M0238
2" ALUMINUM
FLATHEAD CAP
013-0402005
3/8"
FLAT WASHER
LARGE, USS, 25mm
013-0102020
3/8"
LOCK WASHER
016-0009003
1" SHIM WASHER
013-0003004
1 1/16"
FENDER WASHER
013-0102003
1/2"
FLAT WASHER
SMALL, SAE, 27mm
013-0102018
1/2"
LOCK WASHER
013-0102026
1/2"
FLAT WASHER
LARGE, USS, 34mm
014-0018001
1/2" LONG
SPACER
013-0003002
3/8" FENDER WASHER
026-01PL151
PLASTIC 1 1/16"
FENDER WASHER
014-0018002
1" LONG
SPACER
CF-3753 ASSEMBLY
PAGE 34
OWNER'S MANUAL
WASHER SIZING CHART
(CONTINUED)
026-01M0211
1/4" LONG
FLANGED SPACER
026-01M211T
1/4" LONG HEAVY
FLANGED SPACER
026-01M0788
.81" LONG HEAVY
FLANGED SPACER
026-01M0789
.44" LONG HEAVY
FLANGED SPACER
026-01M0600
.625" LONG
FLANGED SPACER
PAGE 35
026-01M0198
1/2" LONG
FLANGED SPACER
026-01M0532
11/16" LONG HEAVY
FLANGED SPACER
026-01M0780
.65" LONG HEAVY
FLANGED SPACER
026-01M0762
1 1/2" LONG HEAVY
FLANGED SPACER
026-01M0240
1 3/8" ALUMINUM
FLATHEAD CAP
026-01M0760
1/2" LONG HEAVY
FLANGED SPACER
026-01M0551
1" LONG HEAVY
FLANGED SPACER
026-01M0761
1 11/16" LONG HEAVY
FLANGED SPACER
026-01M0768
1 1/4" LONG HEAVY
FLANGED SPACER
026-01M0239
1 5/8" ALUMINUM
FLATHEAD CAP
CF-3753 ASSEMBLY
OWNER'S MANUAL
MAINTENANCE SCHEDULE
ROUTINE
COMMERCIAL /
HOME
LIGHT COMMERCIAL
MAINTENANCE
MAINTENANCE
Inspect;
Links, Pull Pins, Snap Locks,
Swivels, Weight Stack Pins
DAILY
WEEKLY
Clean;
Upholstery
DAILY
WEEKLY
Inspect;
Cables or Belts and their
tension
DAILY
WEEKLY
Inspect;
Accessory Bars, and Handles
WEEKLY
3 MONTHS
Inspect;
All Decals
WEEKLY
3 MONTHS
WEEKLY
3 MONTHS
WEEKLY
3 MONTHS
Clean & Lubricate;
Guide Rods with a Teflon (PTFE)
based lubricant (Superlube)
MONTHLY
3 MONTHS
Lubricate;
Seat Sleeves, Turcite Bushings,
Linear Bearing
MONTHLY
3 MONTHS
Clean and Wax;
All Glossy Finishes
6 MONTHS
YEARLY
Repack with Grease;
Linear Bearings
6 MONTHS
YEARLY
YEARLY
3 YEARS
Inspect;
All Nuts and Bolts, Tighten if needed
Inspect;
Anti-Skid Surface
Replace;
Cables, Belts and Connecting Parts
LATEST DATE ENTRY
Your equipment comes with a commercial maintenance decal.
For personal, in home use, please follow the home maintenance schedule listed above.
Never use ammonia, acid-based, or petroleum-based solvents on
any portion of the machine as it may damage the finish.
CF-3753 ASSEMBLY
PAGE 36
OWNER'S MANUAL
HOIST FITNESS SYSTEMS
GENERAL MAINTENANCE INFORMATION
Links, Pull-Pins, Snap Hooks, Swivels, Weight Stack Pins:
*Check all pieces for signs of visible wear or damage.
*Check springs in snap hooks and pull-pins for proper tension and alignment.
*If the spring sticks or has lost its rigidity, replace it immediately.
Upholstery:
*To ensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped down with a damp cloth after every workout.
*Periodically take the time to use a mild soap or an approved vinyl upholstery cleaner to deter the onset of cracking or drying. Avoid using any
abrasive cleaners or cleaners not intended for use on vinyl.
*Replace ripped or warn upholstery immediately.
*Keep sharp or pointed objects clear of all upholstery.
Decals:
*Inspect and familiarize yourself with any safety warnings or other user information posted on each decal.
Nuts and Bolts:
*Inspect all nuts and bolts for any loosening and tighten if needed.
*Go through a re-tightening sequence periodically to ensure that all hardware is tensioned proper.
Anti-Skid Surfaces:
*These surfaces are designed to supply secure footing and need to be replaced if they appear worn or become slippery.
Belts and Cables:
*Hoist uses only high quality belt, and mil-spec cables.
*Visually inspect the belts and cables for fraying, cracking, peeling or discoloration.
*While the machine is not in use, carefully run your fingers along the belt or cable to feel for thinning or bulging areas.
*Replace belts and cables immediately at the first signs of damage or wear. Do not use equipment until belts or cables have been replaced.
Belt and Cable Tension:
*Referring to the Owners Manual, when belts or cables are used check all bolts attachments to be sure they are properly attached.
*Check slack in cables and re-adjust cable tension if needed.
Seat Sleeves, Guide Rods:
*Wipe down adjusting tubes with a dust free rag before applying lubricant.
*Lubricate seat sleeves and Guide Rods with a Silicon or Teflon based lubricant spray.
Linear Bearings:
*Referring to the Owners Manual carefully disassemble the bearing from its housing and place a finger full of light grease (lithium, super lube,
etc.) into the inside of the bearing. Using your finger, press the grease into the ball-bearings and their tracks. repeat until the ball-bearing
tracks are full of grease. Insert the shaft back into the bearing and wipe off excess grease.
PLEASE KEEP THIS FOR YOUR RECORDS
PAGE 37
CF-3753 ASSEMBLY
OWNER'S MANUAL
WEIGHT TRAINING TIPS
Use this manual to guide you through the basic exercises you can perform on
your CF-3753 HOIST® Fitness System. To gain maximum results and avoid
possible injury, consult a fitness professional to develop your complete exercise
program.
Always consult your physician before starting any exercise program.
To be successful in your exercise program, it is important to develop an
understanding of the basic principles of strength training. Now that you have
your CF-3753 HOIST® Fitness System, it is only natural that you want to get
started immediately. First, determine a set of realistic goals and objectives for
yourself. By deciding on an exercise plan that is right for you prior to starting,
you will contribute significantly to your success.
Warm up properly before engaging in weight resistance training. Stretching,
yoga, jogging, calisthenics or other cardiovascular exercise can help prepare
your body for the heavier workload of lifting weights.
Learn how to perform the exercise correctly before using heavy weight.
Correct form is important to avoid injury and to ensure that you work the proper
muscle groups.
Know your limitations. If you are new to weight training or are embarking on
an exercise regimen after a long layoff, start slowly and build foundational
strength over a longer period of time.
Pay attention to your breathing. Exhale when you exert is a general rule of
thumb. Never hold your breath.
Enjoy your CF-3753 HOIST® Fitness System!
CF-3753 ASSEMBLY
PAGE 38
OWNER'S MANUAL
WEIGHT RATIOS
STARTING WEIGHT IS 25 LBS.
MAXIMUM WEIGHT RATING IS 540 LBS.
The above chart shows the standard weight stack for this unit. The weights
listed are approximate. HOIST reserves the right to modify the machine without
prior notice.
PAGE 39
CF-3753 ASSEMBLY
OWNER'S MANUAL
Date
Exercise
Totals
S = Sets R = Repetition per set W = Weight used
WEIGHT TRAINING EXERCISE LOG
S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W
PAGE 40
CF-3753 ASSEMBLY
OWNER'S MANUAL
HOIST FITNESS SYSTEMS
LIMITED LIFETIME WARRANTY
Hoist Fitness Systems warrants this product to the original purchaser to be free from defects in workmanship and/or
materials under normal use or service. If at any time a component part is defective, Hoist Fitness Systems shall repair or replace it
(at Hoist Fitness Systems option) within a reasonable period of time. This warranty does not cover costs of removal, transportation
or reinstallation. This warranty shall not apply if the defect was caused by misuse, neglect or normal wear and tear.
WARRANTY CLAIMS. All claims require: Model number, Serial number, Date of installation, and any
information supporting the existence of the alleged defect.
To complete Warranty Registration visit:
www.HOISTFITNESS.com
and click on the Warranty Registration link
Starting from the original date of purchase, normal wear and tear shall be considered as the following:
COMMERCIAL USE: All malfunctions of upholstery, grips, and coatings that occur up to one year; all malfunctions of belts, or
cables up to one year; all malfunctions of pulleys, bearings, or bushings that occur up to three years. The frame and body
components are warranted for ten years, with structural moving parts warranted for five years.
LIGHT COMMERCIAL USE: All malfunctions of upholstery, grips, and coatings that occur up to one year; all malfunctions of
belts, or cables up to one year; all malfunctions of pulleys, bearings, or bushings that occur up to three years. The frame and body
components are warranted for ten years, with structural moving parts warranted for five years.
HOME USE: All malfunctions of grips, paint, and chrome that occur up to ten years; all malfunctions of electronic components,
belts, cables, or upholstery that occur up to ten years; all malfunctions of pulleys, bearings, or bushings that occur up to ten years.
The frame and all welded components are warranted for the life of the product.
PLEASE NOTE THAT NOT ALL HOIST PRODUCTS ARE MADE FOR COMMERCIAL USE. Refer to the instructions page of
your owners manual or consult with you fitness product dealer to establish if a product is made for commercial use or not. Using a
non-commercial product in a commercial setting can result in serious injury or death! Hoist Fitness Systems sole responsibility
shall be to repair or replace the component within the terms stated above. Hoist Fitness Systems shall not be liable for any loss or
damage of any kind including any incidental or consequential damages resulting, directly or indirectly from any warranty
expressed or implied or any other failure of this product.
LIGHT COMMERCIAL USE: Our Light Commercial warranty applies to facilities that DO NOT charge monthly membership dues
and where the equipment would be used by no more than 50 people per day. Examples of Light Commercial facilities include
hotels, apartment complexes, personal training studios, fire stations, police stations, etc., that meet the criteria stated above.
WHAT IS NOT COVERED BY THIS WARRANTY: Hoist's sole obligation under this warranty is limited to either repair or
replacement of parts, subject to the additions below. This warranty neither assumes nor authorizes any person to assume
obligations other than expressly covered by this warranty.
NO CONSEQUENTIAL DAMAGES: Hoist is not responsible for economic loss; profit loss; or special, indirect, or consequential
damages.
WARRANTY IS NOT TRANSFERABLE: This warranty is not assignable and applies only in favor of the original purchaser/user
to whom delivered. Any such assignment or transfer shall void the warranties herein made and shall void all warranties,
expressed, implied or statutory, except the one (1) and five (5) year warranties described above. These warranties are exclusive
and in lieu of all other warranties, including implied warranty and merchantability or fitness for a particular purpose. There are no
warranties which extend beyond the description on the face hereof.
TRANSPORTATION COSTS: Hoist will accept parts covered under this warranty freight collect, provided that shipment has
received prior approval. Hoist is not responsible for any other transportation costs, but will ship freight collect parts either repaired
or replaced under these warranties.
Hoist Fitness Systems
11900 Community Rd.
Poway, CA. 92064
(800)548-5438
PLEASE KEEP THIS FOR YOUR RECORDS
PAGE 41
CF-3753 ASSEMBLY
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising