HoistFitness | HF-4164 | Owner Manual | HoistFitness HF-4164 Owner Manual

HoistFitness HF-4164 Owner Manual
OWNER'S MANUAL
HF4164
FOLDING FLAT BENCH
Note: Both Serial Number and Model Number are Required when Ordering Parts
RECORD SERIAL NUMBER HERE
CATALOG NUMBER
0406 - 001
Customer Service
(800) 548-5438
(858) 578-7676
Fax
(858) 578-9558
OWNER'S MANUAL
CONTENTS
INSTRUCTIONS ..................................................................... 02
FRAME ASSEMBLY .............................................................. 04
DECAL PLACEMENT............................................................. 07
DECAL REFERENCE............................................................. 08
PART LIST............................................................................... 09
ABBREVIATIONS................................................................... 10
MAINTENANCE SCHEDULE................................................. 11
WEIGHT TRAINING TIPS....................................................... 11
LIMITED LIFETIME WARRANTY.......................................... 12
PAGE 01
HF4164 ASSEMBLY
OWNER'S MANUAL
INSTRUCTIONS
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
THIS PRODUCT IS RATED FOR HOME USE ONLY!
Using this product in a commercial setting will void all warranties and
can result in serious injury or death!
TOOLS REQUIRED
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
HF4164 ASSEMBLY
PAGE 02
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 03
HF4164 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
HF4164 ASSEMBLY
PAGE 04
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE (17) THEN
LOOSEN NUT JUST ENOUGH FOR (2,3)
TO PIVOT FREELY.
1
8
8
8
19
17
20
19
4
19
9
6
7
9
2
6
7
19
20
17
4
3
6
7
6
7
PAGE 05
HF4164 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
5
18
18
16
16
1
18
16
18
16
*IMPORTANT*
NOW THAT THE HF4164 IS COMPLETELY ASSEMBLED TAKE TIME TO
ASSURE THAT YOUR UNIT IS ASSEMBLED SQUARE AND PERPENDICULAR.
HF4164 ASSEMBLY
PAGE 06
OWNER'S MANUAL
DECAL PLACEMENT
NOTE:
- ALL DECALS ARE CENTERED
UNLESS OTHERWISE STATED.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
11
1
3
11
14
15
13
12
10
2
PAGE 07
HF4164 ASSEMBLY
OWNER'S MANUAL
DECAL REFERENCE
THIS PRODUCT
IS NOT
DESIGNED FOR
COMMERCIAL
USE.
USING THIS
PRODUCT IN A
COMMERCIAL
SETTING CAN
RESULT IN
SERIOUS INJURY
OR DEATH!
500 LBS.
MAXIMUM
WEIGHT RATING
021-0003222
021-0003227
021-0003223
021-0003230
021-0003138
HF4164 ASSEMBLY
SERIAL # DECAL
PAGE 08
OWNER'S MANUAL
PART LIST
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
PAGE 09
PART NUMBER
026-01X2801
026-01X2803
026-01X2804
026-01X0185
022-01PD2017-A
016-0201022
019-0002002
026-01M1071
026-01PL2172
SERIAL # DECAL
021-0003222
021-0003223
021-0003227
021-0003230
021-0003138
011-0101080
011-0101109
013-0302008
013-0102027
012-0104008
DESCRIPTION
MAIN FRAME ASSEMBLY
LEG ASSEMBLY (LEFT)
LEG ASSEMBLY (RIGHT)
PULL-PIN ASSEMBLY
UPHOLSTERY PAD W/VINYL BACKING
END CAP 2.00" (BLACK)
CLOSED END GRIP 2.00"
FLNG SPACER - .156" THICK FLNG
COVER - BLACK
DECAL SERIAL # 1.63" X 2.63"
DECAL "H" 1.81" X 2.50"
DECAL NOT FOR COMMERCIAL USE 1.63" X 3.25" (VERTICAL)
500 LB. WEIGHT RATING DECAL (1.625" X 1.625")
DECAL HOIST 1.63" X 5.93"
DECAL PINCH POINT 1.63" X 2.63" (HORIZONTAL)
5/16"-18UNC X .75" BHCS (WZ)
3/8"-16UNC X 4.25" BHCS (WZ)
5/16" USS FLAT WASHER (WZ)
CUSTOM WASHER OD .631", ID .406" (WZ)
3/8"-16UNC THIN NYLOCK NUT (WZ)
QTY.
1
1
1
2
1
4
4
4
2
1
2
1
1
1
1
4
2
4
4
2
HF4164 ASSEMBLY
OWNER'S MANUAL
ABBREVIATIONS
BZ = Black Zinc
WZ = White Zinc
HHB = Hex Head Bolt
FHCS = Flat Head Cap Screw
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
SHSS = Socket Head Shoulder Screw
HF4164 ASSEMBLY
PAGE 10
OWNER'S MANUAL
MAINTENANCE SCHEDULE
ROUTINE
SCHEDULE
Inspect; Pull Pins
Weekly
Inspect; Upholstery
Daily
Inspect; Nuts and
Bolts
3 Months
Inspect; Anti Skid
Surface
3 Months
PROCEEDURE
•
•
•
•
•
•
•
Check for signs of visible wear or damage.
Check springs for proper tension and alignment. If the
spring sticks or has lost its rigidity (tension), replace it
immediately
All pads should be wiped down after every workout,
periodically use a damp cloth and mild soap to clean.
Replace immediately if ripped or worn.
Inspect and tighten if loose.
Go through complete re-tightening sequence
periodically to ensure that all hardware is properly
tensioned.
These surfaces are designed to supply secure gripping
and footing. Replace if they appear worn and become
slippery.
WEIGHT TRAINING TIPS
Always consult you physician before starting any exercise program.
HOIST equipment is designed to maximize your time spent working out. Having
an exercise routine planned out in advance will allow you to get the most benefit out of
the time spent exercising.
Warm up before engaging in weight resistance training.
Learn how to perform the exercise correctly. Correct form is important to avoid
injury and to ensure that you work the proper muscle groups.
Know you limitations. If you are new to weight training or are embarking on an
exercise regimen after a long layoff, start slowly and build foundational strength over a
longer period of time.
Pay attention to your breathing. Never hold your breath.
PAGE 11
HF4164 ASSEMBLY
OWNER'S MANUAL
HOIST FITNESS SYSTEMS
LIMITED LIFETIME WARRANTY
Hoist Fitness Systems warrants this product to the original purchaser to be free from defects in workmanship and/or
materials under normal use or service. If at any time a component part is defective, Hoist Fitness Systems shall repair or
replace it (at Hoist Fitness Systems option) within a reasonable period of time. This warranty does not cover costs of removal.
transportation or reinstallation. This warranty shall not apply if the defect was caused by misuse, neglect or normal wear and
tear.
WARRANTY CLAIMS. All claims require: Model number, Serial
number, Date of installation, and any information supporting the
existence of the alleged defect.
To complete Warranty Registration visit:
www.HOISTFITNESS.com
and click on the Warranty Registration link
Starting from the original date of purchase, normal wear and tear shall be considered as the following:
COMMERCIAL USE: All malfunctions of upholstery, grips, paint, and chrome that occur after one year; all malfunctions of
electronic components, belts, or cables after one year; all malfunctions of pulleys, bearings, or bushings that occur after five
years. The frame and all welded components are warranted for the life of the product.
HOME USE: All malfunctions of grips, paint, and chrome that occur after ten years; all malfunctions of electronic
components, belts, cables, or upholstery that occur after ten years; all malfunctions of pulleys, bearings, or bushings that
occur after ten years. The frame and all welded components are warranted for the life of the product.
PLEASE NOTE THAT NOT ALL HOIST PRODUCTS ARE MADE FOR COMMERCIAL USE.
Refer to the instructions page of your owners manual or consult with you fitness product dealer to establish if a product is
made for commercial use or not. Using a non-commercial product in a commercial setting can result in serious injury or
death!
Hoist Fitness Systems sole responsibility shall be to repair or replace the component within the terms stated above. Hoist
Fitness Systems shall not be liable for any loss or damage of any kind including any incidental or consequential damages
resulting, directly or indirectly from any warranty expressed or implied or any other failure of this product.
WHAT IS NOT COVERED BY THIS WARRANTY
Hoist's sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additions below.
This warranty neither assumes nor authorizes any person to assume obligations other than expressly covered by this
warranty.
NO CONSEQUENTIAL DAMAGES. Hoist is not responsible for economic loss; profit loss; or special, indirect, or
consequential damages.
WARRANTY IS NOT TRANSFERABLE. This warranty is not assignable and applies only in favor of the original
purchaser/user to whom delivered. Any such assignment or transfer shall void the warranties herein made and shall void all
warranties, expressed, implied or statutory, except the one (1) and five (5) year warranties described above. These
warranties are exclusive and in lieu of all other warranties, including implied warranty and merchantability or fitness for a
particular purpose. There are no warranties which extend beyond the description on the face hereof.
TRANSPORTATION COSTS. Hoist will accept parts covered under this warranty freight collect, provided that shipment
has received prior approval. Hoist is not responsible for any other transportation costs, but will ship freight collect parts either
repaired or replaced under these warranties.
Hoist Fitness Systems
9990 Empire St. #130
San Diego, CA. 92126
(800)548-5438
PLEASE KEEP THIS FOR YOUR RECORDS
HF4164 ASSEMBLY
PAGE 12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising