HoistFitness | HF-5962 | Owner Manual | HoistFitness HF-5962 Owner Manual

HoistFitness HF-5962 Owner Manual
HF-5962
FITNESS TREE
**WARNING!**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR. FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY OR DEATH.
A01
OWNER’S MANUAL
CONTENTS
INSTRUCTIONS……………………………..…………………... 02
FRAME ASSEMBLY……………………..………..………….… 04
PRE-ASSEMBLY………………………………..………………. 17
DECAL PLACEMENT……………………….....……………….. 18
DECAL REFERENCE………………...........….………….……. 19
PART LIST…………………………..……….…….…………..… 20
ABBREVIATIONS……………………..……….………….…….. 22
BOLT SIZING CHART…………………………………………... 23
WASHER SIZING CHART…………….….…….…………….... 29
MAINTANENCE SCHEDULE…………..………….………..…. 31
GENERAL MAINTANENCE INFORMATION.............…….… 32
WEIGHT TRAINING TIPS…………………….……….……….. 33
EXERCISE LOG…………………………………..……………... 34
LIMITED WARRANTY…………………………..………………. 35
PAGE 01
HF-5962 ASSEMBLY
OWNER’S MANUAL
INSTRUCTIONS
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
TOOLS REQUIRED
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
SAE Hex Key Wrench Set
Two People
HF-5962 ASSEMBLY
PAGE 02
OWNER’S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 03
HF-5962 ASSEMBLY
OWNER’S MANUAL
FRAME ASSEMBLY
HF-5962 ASSEMBLY
PAGE 04
OWNER’S MANUAL
FRAME ASSEMBLY
IMPORTANT
BE SURE TO ALWAYS SUPPORT UPRIGHTS (15)(9) THROUGH THE FOLLOWING STEPS.
FAILURE TO FOLLOW THESE DIRECTIONS COULD RESULT IN INJURY OR DEATH.
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
PAGE 05
HF-5962 ASSEMBLY
OWNER’S MANUAL
FRAME ASSEMBLY
IMPORTANT
BE SURE TO ALWAYS SUPPORT UPRIGHTS (15)(9) THROUGH THE FOLLOWING STEPS.
FAILURE TO FOLLOW THESE DIRECTIONS COULD RESULT IN INJURY OR DEATH.
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
HF-5962 ASSEMBLY
PAGE 06
OWNER’S MANUAL
FRAME ASSEMBLY
IMPORTANT
BE SURE TO ALWAYS SUPPORT UPRIGHTS (15)(9) THROUGH THE FOLLOWING STEPS.
FAILURE TO FOLLOW THESE DIRECTIONS COULD RESULT IN INJURY OR DEATH.
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
PAGE 07
HF-5962 ASSEMBLY
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
HF-5962 ASSEMBLY
PAGE 08
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
PAGE 09
HF-5962 ASSEMBLY
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL PREVIOUSLY
HAND TIGHTENED HARDWARE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
HF-5962 ASSEMBLY
PAGE 10
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
PAGE 11
HF-5962 ASSEMBLY
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
HF-5962 ASSEMBLY
PAGE 12
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
PAGE 13
HF-5962 ASSEMBLY
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
[Type a quote from the document or the summary
of an interesting point. You can position the text
box anywhere in the document. Use the Drawing
Tools tab to change the formatting of the pull
quote text box.]
HF-5962 ASSEMBLY
PAGE 14
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
- VERTICAL KNEE RAISE POSITION
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
PAGE 15
HF-5962 ASSEMBLY
OWNER’S MANUAL
FRAME ASSEMBLY
NOTE:
- SIT-UP POSITION
- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.
*IMPORTANT*
NOW THAT THE HF-5962 IS COMPLETELY ASSEMBLED TAKE TIME TO ASSURE
THAT YOUR UNIT IS ASSEMBLED SQUARE AND PERPENDICULAR. IF IT IS NOT,
IT WILL BE NECESSARY TO LOOSEN SOME FRAME HARDWARE TO RE-ALIGN
THE FRAME AND RETIGHTEN BOLTS.
HF-5962 ASSEMBLY
PAGE 16
OWNER’S MANUAL
PRE-ASSEMBLY
PAGE 17
HF-5962 ASSEMBLY
OWNER’S MANUAL
DECAL PLACEMENT
HF-5962 ASSEMBLY
PAGE 18
OWNER’S MANUAL
DECAL REFERENCE
021-0003512
021-0003008
021-0003135
SERIAL # DECAL
021-0003221
021-0003230
PAGE 19
HF-5962 ASSEMBLY
OWNER’S MANUAL
PART LIST
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
HF-5962 ASSEMBLY
PAGE 20
OWNER’S MANUAL
PART LIST
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
PAGE 21
HF-5962 ASSEMBLY
HF-5962 ASSEMBLY
PAGE 22
PAGE 23
HF-5962 ASSEMBLY
HF-5962 ASSEMBLY
PAGE 24
PAGE 25
HF-5962 ASSEMBLY
HF-5962 ASSEMBLY
PAGE 26
PAGE 27
HF-5962 ASSEMBLY
HF-5962 ASSEMBLY
PAGE 28
PAGE 29
HF-5962 ASSEMBLY
HF-5962 ASSEMBLY
PAGE 30
PAGE 31
HF-5962 ASSEMBLY
HF-5962 ASSEMBLY
PAGE 32
PAGE 33
HF-5962 ASSEMBLY
HF-5962 ASSEMBLY
PAGE 34
PAGE 35
HF-5962 ASSEMBLY
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising