HoistFitness | V-ELITE | Owner Manual | HoistFitness V-ELITE Owner Manual

HoistFitness V-ELITE Owner Manual
OWNER'S MANUAL
V-ELITE
MULTI-FUNCTION GYM
Note: Both Serial Number and Model Number are Required when Ordering Parts
RECORD SERIAL NUMBER HERE
Customer Service
MACHINE CODE
(800) 548-5438
(858) 578-7676
Fax
G00
(858) 578-9558
OWNER'S MANUAL
CONTENTS
INSTRUCTIONS ..................................................................... 02
FRAME ASSEMBLY .............................................................. 04
ACCESSORIES/MISC............................................................ 63
PRE-ASSEMBLY.................................................................... 64
DECAL PLACEMENT............................................................. 65
DECAL REFERENCE............................................................. 66
PART LIST............................................................................... 69
ABBREVIATIONS................................................................... 74
BOLT SIZING CHART............................................................ 75
WASHER SIZING CHART...................................................... 76
MAINTENANCE SCHEDULE................................................. 78
GENERAL MAINTENANCE INFORMATION........................ 79
WEIGHT TRAINING TIPS....................................................... 80
WEIGHT RATIOS.................................................................... 81
EXERCISE LOG...................................................................... 82
LIMITED WARRANTY............................................................ 83
PAGE 01
V-ELITE ASSEMBLY
OWNER'S MANUAL
INSTRUCTIONS
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
TOOLS REQUIRED
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
V-ELITE ASSEMBLY
PAGE 02
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 03
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
V-ELITE ASSEMBLY
PAGE 04
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
126
107
32
15
26
107
140
PAGE 05
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
153
107
32
107
140
26
V-ELITE ASSEMBLY
15
PAGE 06
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
60
APPLY LUBRICATION (158) TO
GUIDE RODS (60) PRIOR TO
INSTALLATION OF WEIGHT
PLATES.
158
26
107
110
120
PAGE 07
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
IF OPTIONAL 200LB. WEIGHT STACK IS
PURCHASED, REMOVE AND DISCARD ALL
STAND-OFFS (91) AND SPACERS (160) AND
ASSEMBLE WEIGHT STACK WITH FIVE MORE
WEIGHT PLATES, AS SHOWN TO THE RIGHT
104
55
160
60
91
**OPTIONAL 200LB. WEIGHT STACK**
CONSULT YOUR DEALER FOR DETAILS
60
104
55
V-ELITE ASSEMBLY
PAGE 08
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
128
107
17
107
140
26
PAGE 09
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
WARNING!
BE SURE TO HAVE ONE PERSON FULLY SUPPORT UPRIGHT (29) WHILE THE
OTHER ALIGNS AND FASTENS HARDWARE. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.
29
129
107
63
78
107
140
78
26
63
V-ELITE ASSEMBLY
PAGE 10
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
29
152
29
84
152
98
159
PROPERLY INSTALLED VIEW
159
159
34 3/4" 883
PAGE 11
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
159
37
V-ELITE ASSEMBLY
PAGE 12
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 13
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
129
107
27
107
140
29
V-ELITE ASSEMBLY
PAGE 14
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
40
BE SURE BUSHING (94) IS POSITIONED
AS SHOWN FOR PROPER GUIDE-ROD
ALIGNMENT.
94
27
PAGE 15
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
IMPORTANT
If you are installing a V HI-LO Option
refer to the V HI-LO owner's manual
and assemble the V HI-LO frame part
at this time.
120
107
27
33
107
140
V-ELITE ASSEMBLY
PAGE 16
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
* FOR INSTALLATION OF V LEG PRESS
OPTION ONLY, DISCARD PLATE (85).
IMPORTANT:
If you are installing a V Leg Press option
refer to the V Leg Press owners manual
and assemble the V Leg Press frame
parts at this time.
IMPORTANT:
If you are installing a V HI-LO option
refer to the V HI-LO owners manual
and assemble the V HI-LO frame
parts at this time.
*
85
130
107
26
85
107
140
PAGE 17
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE (133) THEN
LOOSEN NUT JUST ENOUGH FOR (35) TO
PIVOT FREELY.
133
108
26
108
35
141
V-ELITE ASSEMBLY
PAGE 18
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE (155) THEN
LOOSEN NUT JUST ENOUGH FOR (20) TO
PIVOT FREELY.
155
108
26
21
108
18
139
20
PAGE 19
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE (132) THEN
LOOSEN NUT JUST ENOUGH FOR (22) TO
PIVOT FREELY.
MAKE SURE SIDE WITH
RUBBER STOPPER IS
FACING UP.
22
132
108
26
108
141
V-ELITE ASSEMBLY
PAGE 20
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE (135) THEN
LOOSEN NUT JUST ENOUGH FOR (19) TO
PIVOT FREELY.
- WRENCH TIGHTEN ALL HARDWARE FROM
PREVIOUS STEPS.
20
135
108
19
108
141
*IMPORTANT*
NOW THAT THE V-ELITE FRAME IS ASSEMBLED TAKE TIME TO ASSURE
THAT YOUR UNIT IS ASSEMBLED SQUARE AND PERPENDICULAR. USE A LEVEL TO
CHECK THAT THE GUIDE RODS ARE PERPENDICULAR IN BOTH DIRECTIONS. IF NOT,
IT WILL BE NECESSARY TO LOOSEN SOME FRAME HARDWARE TO RE-ALIGN THE
FRAME AND RETIGHTEN BOLTS.
PAGE 21
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
73
27
V-ELITE ASSEMBLY
PAGE 22
OWNER'S MANUAL
FRAME ASSEMBLY
*026-01X5083
PRESS ARM HANGER ASSEMBLY
NOTE:
* HANGER ASSEMBLY ORIGINALLY
INCLUDED WITH V PRESS ARM.
27
73
PAGE 23
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
ASSEMBLY & HARDWARE
* HANGER
ORIGINALLY INCLUDED WITH V PRESS
ARM.
- WRENCH TIGHTEN HARDWARE.
* 011-0007097
1/4"-20UNC X .75" SHCS (BZ)
27
026-01X5083
* PRESS
ARM HANGER ASSEMBLY
* 014-0019005-1
T SPLIT COLLAR THREADED 1.00" I.D. X 20mm
V-ELITE ASSEMBLY
PAGE 24
OWNER'S MANUAL
FRAME ASSEMBLY
CABLING PROFILE VIEW
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
NOTE:
BE SURE CABLE RUNS
BETWEEN THE PULLEYS AND
GUARD RODS AS SHOWN.
4
CABLE
93
77
NOTE:
WHEN ADJUSTING CABLE FOR
PROPER TENSION, INSURE THAT
BOTH PLATES (77) ARE RESTING
UNDER THE BUMPERS STOP (93)
AS SHOWN.
PAGE 25
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
PROPERLY INSTALLED VIEW
NOTE:
- WRENCH TIGHTEN HARDWARE.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
BE SURE TO POSITION
CABLE (4) BETWEEN
PULLEY (51) AND
GUARD BAR AS SHOWN
GUARD BAR
76
51
51
76
27
4
27
129
CABLE BOLT
107
LANYARD
LANYARD RING
140
107
JAM NUT
FINE TUNING:
LOOSEN JAM NUT AND THREAD
BOLT IN/OUT TO GIVE THE CABLE
PROPER TENSION. RE-TIGHTEN
JAM NUT.
WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
4
143 1/8" 3635
V-ELITE ASSEMBLY
PAGE 26
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
121
107
27
77
107
140
4
50
PAGE 27
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
CABLE GUARD BOLT
50
129
107
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
4
129
64
107
27
140
BE SURE TO POSITION
CABLE (4) BETWEEN
PULLEY (50) AND GUARD
BOLT (129) AS SHOWN.
50
64
129
140
4
PROPERLY INSTALLED VIEW
V-ELITE ASSEMBLY
PAGE 28
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
4
123
107
107
140
53
29
PAGE 29
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
THIS PART ORIGINALLY INCLUDED
IN V-PRESS-ARM UNIT.
*
121
107
107
140
*
4
V-ELITE ASSEMBLY
50
PAGE 30
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
53
4
140
109
53
4
109
127
PAGE 31
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
THIS PART ORIGINALLY INCLUDED
IN V-PRESSARM UNIT.
PROPERLY INSTALLED VIEW
*
4
50
*
140
107
*
107
121
50
4
V-ELITE ASSEMBLY
PAGE 32
OWNER'S MANUAL
FRAME ASSEMBLY
50
4
129
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
27
64
PROPERLY INSTALLED VIEW
64
BE SURE TO POSITION
CABLE (4) BETWEEN
PULLEY (50) AND
GUARD BAR AS SHOWN
140
GUARD BAR
4
50
PAGE 33
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
129
107
107
27
140
13
V-ELITE ASSEMBLY
PAGE 34
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
PROPERLY INSTALLED VIEW
52
BE SURE TO POSITION
CABLE (4) BETWEEN
PULLEY (52) AND
GUARD BAR AS SHOWN
52
4
129
107
4
GUARD BAR
107
140
PAGE 35
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
CABLING PROFILE VIEW
3
V-ELITE ASSEMBLY
PAGE 36
OWNER'S MANUAL
FRAME ASSEMBLY
PROPERLY INSTALLED VIEW
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
29
FINE TUNING:
LOOSEN JAM NUT AND THREAD
BOLT IN/OUT TO GIVE THE CABLE
PROPER TENSION. RE-TIGHTEN
JAM NUT.
WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
JAM NUT
CABLE BOLT
29
121
107
50
3
14
107
140
94 1/4" 2394
PAGE 37
3
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
125
66
29
3
53
66
140
V-ELITE ASSEMBLY
PAGE 38
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
**PROPERLY INSTALLED VIEW**
90
134
108
BE SURE PULLEY BRACKET (82)
IS INSTALLED AT A RIGHT ANGLE,
AS SHOWN.
29
30
53
3
124
PAGE 39
107
82
107
140
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
123
3
112
107
29
53
V-ELITE ASSEMBLY
PAGE 40
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
121
107
PROPERLY INSTALLED VIEW
77
107
140
50
3
77
3
50
PAGE 41
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
FINE TUNING:
LOOSEN JAM NUT AND THREAD
BOLT IN/OUT TO GIVE THE CABLE
PROPER TENSION. RE-TIGHTEN
JAM NUT.
3
WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
JAM BOLT
JAM NUT
84
3
14
84
V-ELITE ASSEMBLY
PAGE 42
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
CABLING PROFILE VIEW
5
PAGE 43
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
PROPERLY INSTALLED VIEW
POSITION CABLE (5) THROUGH QUICK
RELEASE (152) IN ORDER TO SECURE CABLE
TO LEG EXTENSION ASSEMBLY (21).
21
152
18
5
5
152
21
5
64 3/4" 1645
V-ELITE ASSEMBLY
PAGE 44
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
PROPERLY INSTALLED VIEW
50
GUARD BAR
5
BE SURE TO POSITION
CABLE (5) BETWEEN
PULLEY (50) AND
GUARD BAR AS SHOWN
124
63
63
50
140
5
PAGE 45
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
PROPERLY INSTALLED VIEW
50
26
5
BE SURE TO POSITION
CABLE (5) ON PULLEY
(50) AS SHOWN
50
154
107
5
107
50
V-ELITE ASSEMBLY
140
PAGE 46
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
PROPERLY INSTALLED VIEW
5
53
53
129
BE SURE TO POSITION
CABLE (5) BETWEEN
PULLEY (53) AND
PREVIOUSLY INSTALLED
GUARD BOLT (129) AS SHOWN
5
53
5
129
26
63
75
140
129
PAGE 47
GUARD BOLT
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN CABLE ASSEMBLY
(5) TO SECURE ONTO (14).
FINE TUNING:
LOOSEN JAM NUT AND THREAD
BOLT IN/OUT TO GIVE THE CABLE
PROPER TENSION. RE-TIGHTEN
JAM NUT.
14
WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
JAM NUT
JAM BOLT
5
53
5
V-ELITE ASSEMBLY
PAGE 48
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
CABLING PROFILE VIEW
IMPORTANT:
If you are installing a V HI-LO Option, do not
install cable (2). Refer to the V HI-LO owner's
manual and follow assembly steps to install
CABLE ASSEMBLY: V HI-LO AB 167.91" LG.
(item # 1 in V HI-LO owner's manual) in place
of cable (2).
2
PAGE 49
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- WRENCH TIGHTEN HARDWARE.
107
123
140
107
53
V-ELITE ASSEMBLY
PAGE 50
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN HARDWARE.
123
107
53
2
107
140
2
129 1/16" 3278
PAGE 51
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN HARDWARE.
122
107
14
50
107
140
2
V-ELITE ASSEMBLY
PAGE 52
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN HARDWARE.
PROPERLY INSTALLED VIEW
CABLE BOLT
JAM NUT
159
37
81
63
140
75
130
2
53
78
FINE TUNING:
LOOSEN JAM NUT AND THREAD
BOLT IN/OUT TO GIVE THE CABLE
PROPER TENSION. RE-TIGHTEN
JAM NUT.
130
WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
75
81
53
37
78
63
140
PAGE 53
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN HARDWARE.
123
107
107
140
53
2
V-ELITE ASSEMBLY
PAGE 54
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN HARDWARE.
PROPERLY INSTALLED VIEW
127
BE SURE TO POSITION
CABLE (2) BETWEEN
PULLEY (53) AND
CABLE GUARD BOLT (127)
AS SHOWN
53
2
CABLE GUARD BOLT
127
53
109
2
29
109
140
PAGE 55
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
7
26
106
114
V-ELITE ASSEMBLY
PAGE 56
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE (136)
THEN LOOSEN NUT JUST ENOUGH
FOR (36) TO PIVOT FREELY.
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
138
61
57
25
141
108
71
9
36
108
136
PAGE 57
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
114
106
36
8
V-ELITE ASSEMBLY
PAGE 58
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
29
25
116
PAGE 59
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
22
103
58
103
19
62
119
43
103
62
119
58
103
16
*WRENCH TIGHTEN ALL PREVIOUSLY HAND TIGHTENED HARDWARE*
V-ELITE ASSEMBLY
PAGE 60
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
107
33
112
118
79
26
107
112
118
PAGE 61
80
V-ELITE ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL SHIELD HARDWARE
FROM PREVIOUS STEPS.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
107
112
118
107
112
118
V-ELITE ASSEMBLY
PAGE 62
OWNER'S MANUAL
ACCESSORIES/MISC
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
12
56
31
56
31
56
56
23
156
11
158
PAGE 63
151
V-ELITE ASSEMBLY
OWNER'S MANUAL
PRE-ASSEMBLY
27
44
46
95
93
44
25
99
41
18
6
46
84
92
96
105
29
111
47
113
46
28
47
20
131
86
46
115
32
39
69
46
45
46
48
42
88
10
70
35
112
22
68
117
46
42
67
17
46
19
117
21
97
54
112
89
39
46
46
39
68
67
89
54
117
112
26
54
46
V-ELITE ASSEMBLY
PAGE 64
OWNER'S MANUAL
DECAL PLACEMENT
NOTE:
- ALL DECALS ARE CENTERED
UNLESS OTHERWISE STATED.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
150
*IF USING THE STANDARD 150LB. WEIGHT
STACK, SET ASIDE THE WEIGHT STACK
NUMBERS 16-20. THESE ARE ONLY USED IN
THE OPTIONAL 200LB. WEIGHT STACK*
142
148
150
149
145
146
144
PAGE 65
143
147*
V-ELITE ASSEMBLY
OWNER'S MANUAL
DECAL REFERENCE
021-0018022
SERIAL # DECAL
021-0003322
021-0003672
021-0003675
V-ELITE ASSEMBLY
PAGE 66
OWNER'S MANUAL
DECAL REFERENCE CONTINUED
021-0003965
021-0003135
021-0003008
PAGE 67
V-ELITE ASSEMBLY
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
V-ELITE ASSEMBLY
PAGE 68
OWNER'S MANUAL
PART LIST
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
25
26
27
28
29
30
31
32
33
35
PAGE 69
PART NUMBER
010-01C0372
010-01C0373
010-01C0374
010-01C0659
020-0014027
022-01PD2092-A
022-01PD2304-A
026-01PL2175
026-01X0186
026-01X1118
026-01X1119
026-01X1404
026-01X1414
026-01X1419
026-01X1425
026-01X1540
026-01X1543
026-01X1544
026-01X1545
026-01X1546
026-01X1547
026-01X1635
026-01X3080
026-01X7240
026-01X7239
026-01X3160
026-01X5163
026-01X3177
026-01X5760
026-01X5007
026-01X7241
026-01X5079
DESCRIPTION
CABLE ASSEMBLY: V BASE AB 129.06" LG.
CABLE ASSEMBLY: V BASE FLOATING PULLEY 94.25" LG.
CABLE ASSEMBLY: V BASE PULL DOWN 143.13" LG.
CABLE ASSEMBLY: V ELITE BASE LEG EXTENSION 64.77" LG.
ADJUSTABLE STOP
SEAT PAD ASSEMBLY
PAD ASSEMBLY
PULL-PIN KNOB
PULL-PIN ASSEMBLY
ALUMINUM CURL BAR ASSEMBLY
ALUMINUM LAT BAR ASSEMBLY
BAR MOUNT ASSEMBLY
ADJ. FLOATING PULLEY HOUSING ASSEMBLY
FRAME BASE ASSEMBLY
ROLLER MOUNT ASSEMBLY
HANDLE ASSEMBLY
RESISTANCE PUSH PLATE ASSEMBLY
ROLLER PIVOT HANGER ASSEMBLY
LEG EXTENSION ASSEMBLY
R.O.M. ASSEMBLY
ROLLER SWIVEL ASSEMBLY
FLEECE KNEE STRAP WITH (3) D-RINGS ASSEMBLY
PAD ADJUSTER
SEAT FRAME
TOP MAIN FRAME ASSEMBLY
RATCHET PULL-PIN ASSEMBLY
MAIN UPRIGHT ASSEMBLY
WIDE ADJ. FLOATING PULLEY HOUSING ASSEMBLY
STRAP HANDLE WITH (3) O-RINGS (LOWER) ASSEMBLY
ACCESSORY RACK ASSEMBLY
SHIELD MOUNT - TOP ASSEMBLY
SWIVEL PULLEY ASSEMBLY
QTY
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
V-ELITE ASSEMBLY
OWNER'S MANUAL
PART LIST CONTINUED
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
36
37
39
40
41
42
43
44
45
46
47
48
50
51
52
53
54
55
56
57
58
60
61
62
63
64
66
67
68
69
70
PART NUMBER
026-01X5097
026-01X7122
011-0111008
011-0112002
012-0305003
014-0003003
014-0011001
014-0101005
014-0101014
014-0101015
016-0002007
016-0203003
018-0001002
018-0001003
018-0002014
018-0002015
019-0001001
019-0001006
020-0010002
020-0011009
022-01PDR008
026-01G0177
026-01M0128-1
026-01M0238
026-01M0760
026-01M0761
026-01M0863
026-01M0932
026-01M0933
026-01M0936
026-01M0937
V-ELITE ASSEMBLY
DESCRIPTION
PAD R.O.M.
ANTI-TWIST CABLE ANCHOR
SET SCREW: 1/4"-28 X .25" LG. (WZ)
1/2" X .500" SHSS (WZ)
3/8"-16UNC JAM NUT (WZ)
BEARING: FLANGED BALL BEARING
.50" I.D.
NYLINER BUSHING: Ø 1.09" O.D. X Ø 1.00" I.D X 1.13" LG.
BUSHING: OILITE FLANGED Ø1.38" O.D. X Ø1.00" I.D. X .81" LG.
FLANGED OILITE 0.75" I.D. X .60" L.G.
1/2" I.D. FLANGED OILITE
VINYL SLEEVE Ø.38" X 1.63"
PINETREE PLUG
CABLE PULLEY: Ø3.50"
CABLE PULLEY: Ø4.50"
CABLE PULLEY: WIDE (BORED HUB) Ø4.50"
CABLE PULLEY: WIDE (BORED HUB)
3.50"
PLUG BUMPER
THICK RUBBER DONUT 3.00" X .50" BLACK
SNAP LINK
SPRING
ROLLER PAD 4.00" X 7.00" LG.
GUIDE ROD Ø.75" X 71.44" LG.
PULL PIN CAP
FLATHEAD CAP Ø2.00" ALUM.
HEAVY FLANGED SPACER: Ø.67 O.D. X Ø.39 I.D. X .50 LG.
HEAVY FLANGED SPACER: Ø.39" I.D X 1.69" LG.
HEAVY FLANGED SPACER:
.39" I.D. X .38" LG.
ALUMINIUM CAP: Ø1.25" ID
ALUMINUM RING: Ø1.25" ID
ALUMINIUM RING:
1.00" I.D.
END CAP: ALUMINUM 1.0" I.D.
QTY
1
1
6
2
1
2
2
2
1
14
2
1
10
1
1
11
4
2
4
1
4
2
1
4
6
4
2
2
2
1
1
PAGE 70
OWNER'S MANUAL
PART LIST CONTINUED
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
71
73
75
76
77
78
79
80
81
82
84
85
86
88
89
91
92
93
94
95
96
97
98
99
103
104
105
PAGE 71
PART NUMBER
026-01M2199
026-01M2268
026-01M2539
026-01M2553
026-01P1689
026-01P3368
026-01P6593
026-01P6594
026-01P6073
026-01P6075
026-01P6098
026-01P6119
026-01PL0125
026-01PL0206-26
026-01PL0235-23
026-01PL0369
026-01PL0371
026-01PL0381
026-01PL2201
026-01PL2316
026-01PL2413
026-01PL2420
026-01PL2422
026-01PL2245
026-STD-06-0254
WS#22
013-0002003
DESCRIPTION
PUSH-PIN PLUNGER
SHAFT: Ø 1.00 X 6.56" LG.
HEAVY FLANGED SPACER Ø.39" I.D. X 2.36" LG.
SPACER .75" O.D. X .39" I.D. X 1.50" LG.
DOUBLE PULLEY MOUNT PLATE
GUSSET PLATE
SHIELD-1
SHIELD-2
PULLEY PLATE
BRKT-U
ANTI-TWIST BRKT
BACKING PLATE
E-Z GLIDE PLASTIC SLEEVE
OPEN END GRIP 1.00"
GRIP OPEN END Ø1.188" X 8.75" LG.
WEIGHT STAND OFF
DELRIN BUSHING
BUMPER, HALF ROUND, DUAL STEM
PLASTIC SLEEVE .75" O.D.
ENDCAP (DOMED) - GREY 1.00"
SLOT COVER
SPLIT SLEEVE 1.25" X 2.38"
STOP DISK
PLASTIC FLANGED BUSHING Ø.75" O.D X Ø.50" I.D X .38" LG.
ROLLER BUSHING - 1.00" I.D.
150 LBS. STACK (8.25 LBS. TOP PLATE W/ 20 HOLE STEM)
1/4" X 16mm SAE FLAT WASHER (WZ)
QTY
1
1
2
2
2
2
1
1
1
1
1
2
2
1
2
2
1
1
2
1
1
1
1
1
8
1
2
V-ELITE ASSEMBLY
OWNER'S MANUAL
PART LIST CONTINUED
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
138
139
140
PART NUMBER
013-0302008
013-0402007
013-0102003
013-0102028
013-0102020
013-0102023
013-0102022
011-0102008
011-0107011
011-0101107
011-0311013
011-0101026
011-0101041
011-0002033
011-0107037
011-0407027
011-0407058
011-0107026
011-0107009
011-0007050
011-0407026
011-0407025
011-0107049
011-0107022
011-0407070
011-0101085
011-0407018
011-0407000
011-0407047
011-0407055
011-0307060
012-0102006
012-0105008
012-0104008
V-ELITE ASSEMBLY
DESCRIPTION
5/16" SAE FLAT WASHER (WZ)
3/8" X 22mm FLAT WASHER (WZ)
1/2" X 27mm SAE FLAT WASHER (WZ)
3/8" CURVED WASHER (WZ)
3/8" SPLIT LOCK WASHER (WZ)
1/4" INTERNAL LOCK WASHER (WZ)
3/8" INTERNAL LOCK WASHER (WZ)
1/4"-20UNC X.75" BHCS (WZ)
5/16"-18UNC X 1.25" HHB (WZ)
3/8"-16UNC X .50" BHCS (WZ)
3/8-16UNC X .75" SQUARE HEAD (WZ)
3/8"-16UNC X 1.00" BHCS (WZ)
3/8"-16UNC X .75" BHCS (WZ)
3/8"-16UNC X 1.25" FHCS (WZ)
3/8"-16UNC X 1.25" HHB (WZ)
3/8"-16UNC X 1.75" HHB (WZ)
3/8"-16UNC X 2.00" HHB (WZ)
3/8"-16UNC X 2.25" HHB (WZ)
3/8"-16UNC X 2.50" HHB (WZ)
3/8"-16UNC X 2.75" HHB (WZ)
3/8"-16UNC X 3.00" HHB (WZ)
3/8"-16UNC X 4.00" HHB (WZ)
3/8"-16UNC X 4.75" HHB (WZ)
3/8"-16UNC X 5.00" HHB (WZ)
3/8"-16UNC X 5.25" HHB (WZ)
1/2"-13UNC X .50" BHCS (WZ)
1/2"-13UNC X 2.50" HHB (WZ)
1/2"-13UNC X 3.50" HHB (WZ)
1/2"-13UNC X 4.00" HHB (WZ)
1/2"-13UNC X 4.75" HHB (WZ)
1/2"-13UNC X 6.00" HHB (WZ)
5/16"-18UNC THIN NYLOCK NUT (WZ)
1/2"-13 ACORN NUT (WZ)
3/8"-16 UNC THIN NYLOCK NUT (WZ)
QTY
6
81
11
6
2
2
12
2
6
1
1
3
8
4
4
5
1
5
2
1
4
3
2
14
3
1
1
1
1
1
1
1
1
45
PAGE 72
OWNER'S MANUAL
PART LIST CONTINUED
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
158
159
160
PAGE 73
PART NUMBER
012-0304011
021-0003672
021-0003135
021-0003008
SERIAL # DECAL
021-0003322
021-0003965
021-0003675
021-0003676
021-0018022
020-0014028
026-01M0200
011-0107020
011-0407031
011-0207030
022-0008032
002-0001013
DESCRIPTION
1/2"-13 UNC THIN NYLOCK NUT (WZ)
DECAL: V ELITE BADGE
DECAL WARNING 1.50" X 7.75"
DECAL COMMERCIAL MAINTENANCE 1.50 X 6.69
DECAL HOIST SERIAL # 1.63" X 2.63"
DECAL PINCH POINT 1.25" X 2.31" (VERTICAL)
DECAL: WEIGHT STACK 22 (10-200 LBS.)
DECAL V BACK ADJUSTER
BACK PAD R.O.M. DECAL
DECAL HOISTFITNESS.COM LOGO
14 LINK CHAIN
QUICK RELEASE CABLE LOCK Ø.34" I.D. X 1.00"LG.
3/8"-16UNC X 3.25" HHB (WZ)
3/8"-16UNC X 4.50" HHB (WZ)
1/2"-13UNC X 4.50" HHB (WZ)
AB STRAP
1cc of Synthetic Multi-Purpose Grease (PTFE)
010-01C0666
026-01PL2393
ANTI-TWIST CABLE: 34.76" LG.
3.00" X .81" ID X.313" T SPACER
QTY
4
1
1
1
1
1
1
1
1
2
1
2
2
2
1
1
2
1
2
V-ELITE ASSEMBLY
OWNER'S MANUAL
ABBREVIATIONS
BZ = Black Zinc
Ni = Nickel Plated
SS = Stainless Steel
WZ = White Zinc
HHB = Hex Head Bolt
FHCS = Flat Head Cap Screw
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
Low Head SHCS = Low Head Socket
Head Cap Screw
SHSS = Socket Head Shoulder Screw
V-ELITE ASSEMBLY
PAGE 74
OWNER'S MANUAL
BOLT SIZING CHART
5/16" HHB
3/8" BHCS
RECOMMENDED
TORQUE RANGE:
9-12 ft-lbs
RECOMMENDED
TORQUE RANGE:
18-23 ft-lbs
5/16" SHCS
3/8" SHCS
PAGE 75
4 3/4"
4 1/2"
4 1/4"
4"
3 3/4"
3 1/2"
3 1/4"
3"
2 3/4"
2 1/2"
2 1/4"
2"
1 1/2"
1 1/4"
1"
1 3/4"
5/16" SHSS
5 1/2"
RECOMMENDED
TORQUE RANGE:
47-65 ft-lbs
RECOMMENDED
TORQUE RANGE:
19-26 ft-lbs
RECOMMENDED
TORQUE RANGE:
8-10 ft-lbs
5 1/4"
3 1/4"
3"
2 3/4"
2 1/2"
2 1/4"
2"
1 3/4"
1 1/2"
1 1/4"
1"
3/4"
3/4"
0"
1/4" SHSS
1/2" FHCS
3/8" FHCS
1/4" FHCS
5"
RECOMMENDED
TORQUE RANGE:
39-49 ft-lbs
RECOMMENDED
TORQUE RANGE:
23-29 ft-lbs
RECOMMENDED
TORQUE RANGE:
5-7 ft-lbs
RECOMMENDED
TORQUE RANGE:
3-4 ft-lbs
RECOMMENDED
TORQUE RANGE:
40-50 ft-lbs
4 3/4"
1/4" SHCS
RECOMMENDED
TORQUE RANGE:
11-14 ft-lbs
1/2"
LOW HEAD
SHCS
4 1/2"
RECOMMENDED
TORQUE RANGE:
4-6 ft-lbs
3/8"
LOW HEAD
SHCS
4 1/4"
5/16"
LOW HEAD
SHCS
RECOMMENDED
TORQUE RANGE:
47-65 ft-lbs
4"
1/4"
LOW HEAD
SHCS
1/2" BHCS
RECOMMENDED
TORQUE RANGE:
19-26 ft-lbs
3 3/4"
RECOMMENDED
TORQUE RANGE:
11-15 ft-lbs
1/2" HHB
RECOMMENDED
TORQUE RANGE:
60-75 ft-lbs
RECOMMENDED
TORQUE RANGE:
24-30 ft-lbs
5/16" BHCS
1/4" BHCS
RECOMMENDED
TORQUE RANGE:
5-7 ft-lbs
0"
3/8" HHB
RECOMMENDED
TORQUE RANGE:
14-17 ft-lbs
3 1/2"
1/4" HHB
RECOMMENDED
TORQUE RANGE:
6-8 ft-lbs
3/8" SHSS
RECOMMENDED
TORQUE RANGE:
17-22 ft-lbs
V-ELITE ASSEMBLY
OWNER'S MANUAL
WASHER SIZING CHART
013-0002003
1/4"
FLAT WASHER
SMALL, SAE, 13mm
013-0102028
3/8"
CURVED WASHER
013-0102004
5/16"
FLAT WASHER
LARGE, USS, 22mm
013-0002004
3/8"
FLAT WASHER
SMALL, SAE, 21mm
013-0402007
3/8"
FLAT WASHER
22mm O.D.
013-0102019
1/4"
LOCK WASHER
026-01M0238
2" ALUMINUM
FLATHEAD CAP
013-0402005
3/8"
FLAT WASHER
LARGE, USS, 25mm
013-0102020
3/8"
LOCK WASHER
016-0009003
1" SHIM WASHER
013-0003004
1 1/16"
FENDER WASHER
013-0102003
1/2"
FLAT WASHER
SMALL, SAE, 27mm
013-0102018
1/2"
LOCK WASHER
013-0102026
1/2"
FLAT WASHER
LARGE, USS, 34mm
014-0018001
1/2" LONG
SPACER
013-0003002
3/8" FENDER WASHER
026-01PL151
PLASTIC 1 1/16"
FENDER WASHER
014-0018002
1" LONG
SPACER
V-ELITE ASSEMBLY
PAGE 76
OWNER'S MANUAL
WASHER SIZING CHART
(CONTINUED)
026-01M0211
1/4" LONG
FLANGED SPACER
026-01M211T
1/4" LONG HEAVY
FLANGED SPACER
026-01M0788
.81" LONG HEAVY
FLANGED SPACER
026-01M0789
.44" LONG HEAVY
FLANGED SPACER
026-01M0600
.625" LONG
FLANGED SPACER
PAGE 77
026-01M0198
1/2" LONG
FLANGED SPACER
026-01M0532
11/16" LONG HEAVY
FLANGED SPACER
026-01M0780
.65" LONG HEAVY
FLANGED SPACER
026-01M0762
1 1/2" LONG HEAVY
FLANGED SPACER
026-01M0240
1 3/8" ALUMINUM
FLATHEAD CAP
026-01M0760
1/2" LONG HEAVY
FLANGED SPACER
026-01M0551
1" LONG HEAVY
FLANGED SPACER
026-01M0761
1 11/16" LONG HEAVY
FLANGED SPACER
026-01M0768
1 1/4" LONG HEAVY
FLANGED SPACER
026-01M0239
1 5/8" ALUMINUM
FLATHEAD CAP
V-ELITE ASSEMBLY
OWNER'S MANUAL
MAINTENANCE SCHEDULE
ROUTINE
COMMERCIAL /
HOME
LIGHT COMMERCIAL
MAINTENANCE
MAINTENANCE
Inspect;
Links, Pull Pins, Snap Locks,
Swivels, Weight Stack Pins
DAILY
WEEKLY
Clean;
Upholstery
DAILY
WEEKLY
Inspect;
Cables or Belts and their
tension
DAILY
WEEKLY
Inspect;
Accessory Bars, and Handles
WEEKLY
3 MONTHS
Inspect;
All Decals
WEEKLY
3 MONTHS
WEEKLY
3 MONTHS
WEEKLY
3 MONTHS
Clean & Lubricate;
Guide Rods with a Teflon (PTFE)
based lubricant (Superlube)
MONTHLY
3 MONTHS
Lubricate;
Seat Sleeves, Turcite Bushings,
Linear Bearing
MONTHLY
3 MONTHS
Clean and Wax;
All Glossy Finishes
6 MONTHS
YEARLY
Repack with Grease;
Linear Bearings
6 MONTHS
YEARLY
YEARLY
3 YEARS
Inspect;
All Nuts and Bolts, Tighten if needed
Inspect;
Anti-Skid Surface
Replace;
Cables, Belts and Connecting Parts
LATEST DATE ENTRY
Your equipment comes with a commercial maintenance decal.
For personal, in home use, please follow the home maintenance schedule listed above.
Never use ammonia, acid-based, or petroleum-based solvents on
any portion of the machine as it may damage the finish.
V-ELITE ASSEMBLY
PAGE 78
OWNER'S MANUAL
HOIST FITNESS SYSTEMS
GENERAL MAINTENANCE INFORMATION
Links, Pull-Pins, Snap Hooks, Swivels, Weight Stack Pins:
*Check all pieces for signs of visible wear or damage.
*Check springs in snap hooks and pull-pins for proper tension and alignment.
*If the spring sticks or has lost its rigidity, replace it immediately.
Upholstery:
*To ensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped down with a damp cloth after every workout.
*Periodically take the time to use a mild soap or an approved vinyl upholstery cleaner to deter the onset of cracking or drying. Avoid using any
abrasive cleaners or cleaners not intended for use on vinyl.
*Replace ripped or warn upholstery immediately.
*Keep sharp or pointed objects clear of all upholstery.
Decals:
*Inspect and familiarize yourself with any safety warnings or other user information posted on each decal.
Nuts and Bolts:
*Inspect all nuts and bolts for any loosening and tighten if needed.
*Go through a re-tightening sequence periodically to ensure that all hardware is tensioned proper.
Anti-Skid Surfaces:
*These surfaces are designed to supply secure footing and need to be replaced if they appear worn or become slippery.
Belts and Cables:
*Hoist uses only high quality belt, and mil-spec cables.
*Visually inspect the belts and cables for fraying, cracking, peeling or discoloration.
*While the machine is not in use, carefully run your fingers along the belt or cable to feel for thinning or bulging areas.
*Replace belts and cables immediately at the first signs of damage or wear. Do not use equipment until belts or cables have been replaced.
Belt and Cable Tension:
*Referring to the Owners Manual, when belts or cables are used check all bolts attachments to be sure they are properly attached.
*Check slack in cables and re-adjust cable tension if needed.
Seat Sleeves, Guide Rods:
*Wipe down adjusting tubes with a dust free rag before applying lubricant.
*Lubricate seat sleeves and Guide Rods with a Silicon or Teflon based lubricant spray.
Linear Bearings:
*Referring to the Owners Manual carefully disassemble the bearing from its housing and place a finger full of light grease (lithium, super lube,
etc.) into the inside of the bearing. Using your finger, press the grease into the ball-bearings and their tracks. repeat until the ball-bearing
tracks are full of grease. Insert the shaft back into the bearing and wipe off excess grease.
PLEASE KEEP THIS FOR YOUR RECORDS
PAGE 79
V-ELITE ASSEMBLY
OWNER'S MANUAL
WEIGHT TRAINING TIPS
Use this manual to guide you through the basic exercises you can perform on
your V-ELITE HOIST® Fitness System. To gain maximum results and avoid
possible injury, consult a fitness professional to develop your complete exercise
program.
Always consult your physician before starting any exercise program.
To be successful in your exercise program, it is important to develop an
understanding of the basic principles of strength training. Now that you have
your V-ELITE HOIST® Fitness System, it is only natural that you want to get
started immediately. First, determine a set of realistic goals and objectives for
yourself. By deciding on an exercise plan that is right for you prior to starting,
you will contribute significantly to your success.
Warm up properly before engaging in weight resistance training. Stretching,
yoga, jogging, calisthenics or other cardiovascular exercise can help prepare
your body for the heavier workload of lifting weights.
Learn how to perform the exercise correctly before using heavy weight.
Correct form is important to avoid injury and to ensure that you work the proper
muscle groups.
Know your limitations. If you are new to weight training or are embarking on
an exercise regimen after a long layoff, start slowly and build foundational
strength over a longer period of time.
Pay attention to your breathing. Exhale when you exert is a general rule of
thumb. Never hold your breath.
Enjoy your V-ELITE HOIST® Fitness System!
V-ELITE ASSEMBLY
PAGE 80
OWNER'S MANUAL
WEIGHT RATIOS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
120%
12
24
36
48
60
72
84
96
108
120
132
144
156
168
180
192
204
216
228
240
100%
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
75%
8
15
23
30
38
45
53
60
68
75
83
90
98
105
113
120
127.5
135
142.5
150
50%
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
100%
50%
NOTE:
16-20 ARE ONLY APPLICABLE IF OPTIONAL
200LB. WEIGHT STACK IS INSTALLED
NOTE:
UNIT SHOWN WITH STANDARD 150LB. WEIGHT STACK
75% (LEG CURL)
120% (LEG EXTENSION)
50%
The above chart shows the standard weight stack for this unit. The weights
listed are approximate. HOIST reserves the right to modify the machine without
prior notice.
PAGE 81
V-ELITE ASSEMBLY
OWNER'S MANUAL
Date
Exercise
Totals
S = Sets R = Repetition per set W = Weight used
WEIGHT TRAINING EXERCISE LOG
S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W
PAGE 82
V-ELITE ASSEMBLY
OWNER'S MANUAL
HOIST FITNESS SYSTEMS
LIMITED LIFETIME WARRANTY
Hoist Fitness Systems warrants this product to the original purchaser to be free from defects in workmanship and/or
materials under normal use or service. If at any time a component part is defective, Hoist Fitness Systems shall repair or replace it
(at Hoist Fitness Systems option) within a reasonable period of time. This warranty does not cover costs of removal, transportation
or reinstallation. This warranty shall not apply if the defect was caused by misuse, neglect or normal wear and tear.
WARRANTY CLAIMS. All claims require: Model number, Serial number, Date of installation, and any
information supporting the existence of the alleged defect.
To complete Warranty Registration visit:
www.HOISTFITNESS.com
and click on the Warranty Registration link
Starting from the original date of purchase, normal wear and tear shall be considered as the following:
COMMERCIAL USE: All malfunctions of upholstery, grips, and coatings that occur up to one year; all malfunctions of belts, or
cables up to one year; all malfunctions of pulleys, bearings, or bushings that occur up to three years. The frame and body
components are warranted for ten years, with structural moving parts warranted for five years.
LIGHT COMMERCIAL USE: All malfunctions of upholstery, grips, and coatings that occur up to one year; all malfunctions of
belts, or cables up to one year; all malfunctions of pulleys, bearings, or bushings that occur up to three years. The frame and body
components are warranted for ten years, with structural moving parts warranted for five years.
HOME USE: All malfunctions of grips, paint, and chrome that occur up to ten years; all malfunctions of electronic components,
belts, cables, or upholstery that occur up to ten years; all malfunctions of pulleys, bearings, or bushings that occur up to ten years.
The frame and all welded components are warranted for the life of the product.
PLEASE NOTE THAT NOT ALL HOIST PRODUCTS ARE MADE FOR COMMERCIAL USE. Refer to the instructions page of
your owners manual or consult with you fitness product dealer to establish if a product is made for commercial use or not. Using a
non-commercial product in a commercial setting can result in serious injury or death! Hoist Fitness Systems sole responsibility
shall be to repair or replace the component within the terms stated above. Hoist Fitness Systems shall not be liable for any loss or
damage of any kind including any incidental or consequential damages resulting, directly or indirectly from any warranty
expressed or implied or any other failure of this product.
LIGHT COMMERCIAL USE: Our Light Commercial warranty applies to facilities that DO NOT charge monthly membership dues
and where the equipment would be used by no more than 50 people per day. Examples of Light Commercial facilities include
hotels, apartment complexes, personal training studios, fire stations, police stations, etc., that meet the criteria stated above.
WHAT IS NOT COVERED BY THIS WARRANTY: Hoist's sole obligation under this warranty is limited to either repair or
replacement of parts, subject to the additions below. This warranty neither assumes nor authorizes any person to assume
obligations other than expressly covered by this warranty.
NO CONSEQUENTIAL DAMAGES: Hoist is not responsible for economic loss; profit loss; or special, indirect, or consequential
damages.
WARRANTY IS NOT TRANSFERABLE: This warranty is not assignable and applies only in favor of the original purchaser/user
to whom delivered. Any such assignment or transfer shall void the warranties herein made and shall void all warranties,
expressed, implied or statutory, except the one (1) and five (5) year warranties described above. These warranties are exclusive
and in lieu of all other warranties, including implied warranty and merchantability or fitness for a particular purpose. There are no
warranties which extend beyond the description on the face hereof.
TRANSPORTATION COSTS: Hoist will accept parts covered under this warranty freight collect, provided that shipment has
received prior approval. Hoist is not responsible for any other transportation costs, but will ship freight collect parts either repaired
or replaced under these warranties.
Hoist Fitness Systems
11900 Community Rd.
Poway, CA. 92064
(800)548-5438
PLEASE KEEP THIS FOR YOUR RECORDS
PAGE 83
V-ELITE ASSEMBLY
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising