HoistFitness | V-SELECT | Owner Manual | HoistFitness V-SELECT Owner Manual

HoistFitness V-SELECT Owner Manual
OWNER'S MANUAL
V-SELECT
MULTI-FUNCTION GYM
Note: Both Serial Number and Model Number are Required when Ordering Parts
RECORD SERIAL NUMBER HERE
Customer Service
MACHINE CODE
(800) 548-5438
(858) 578-7676
Fax
F00
(858) 578-9558
OWNER'S MANUAL
CONTENTS
INSTRUCTIONS ..................................................................... 02
FRAME ASSEMBLY .............................................................. 04
ACCESSORIES/MISC............................................................ 63
PRE-ASSEMBLY.................................................................... 64
DECAL PLACEMENT............................................................. 65
DECAL REFERENCE............................................................. 66
PART LIST............................................................................... 69
ABBREVIATIONS................................................................... 74
BOLT SIZING CHART............................................................ 75
WASHER SIZING CHART...................................................... 76
MAINTENANCE SCHEDULE................................................. 78
GENERAL MAINTENANCE INFORMATION........................ 79
WEIGHT TRAINING TIPS....................................................... 80
WEIGHT RATIOS.................................................................... 81
EXERCISE LOG...................................................................... 82
LIMITED WARRANTY............................................................ 83
PAGE 01
V-SELECT ASSEMBLY
OWNER'S MANUAL
INSTRUCTIONS
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
TOOLS REQUIRED
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
V-SELECT ASSEMBLY
PAGE 02
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 03
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
V-SELECT ASSEMBLY
PAGE 04
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
113
94
16
5
19
94
121
PAGE 05
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
105
94
16
94
121
19
V-SELECT ASSEMBLY
5
PAGE 06
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
53
APPLY LUBRICATION (139) TO
GUIDE RODS (53) PRIOR TO
INSTALLATION OF WEIGHT
PLATES.
139
94
19
97
107
PAGE 07
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
90
53
90
49
141
77
**OPTIONAL 200 LB. WEIGHT STACK**
CONSULT YOUR DEALER
FOR DETAILS
90
53
90
IF OPTIONAL 200 LB. WEIGHT STACK IS
PURCHASED, REMOVE AND DISCARD
STAND-OFFS (77) AND SPACERS (141)
AND ASSEMBLE WEIGHT STACK WITH
5 MORE WEIGHT PLATES, AS SHOWN TO
THE RIGHT.
V-SELECT ASSEMBLY
49
PAGE 08
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
WARNING!
BE SURE TO HAVE ONE PERSON FULLY SUPPORT UPRIGHT (11) WHILE THE
OTHER ALIGNS AND FASTENS HARDWARE. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH.
115
94
11
57
66
94
121
66
19
57
PAGE 09
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
PROPERLY INSTALLED VIEW
11
55
140
11
55
73
73
85
140
34 3/4" 883
V-SELECT ASSEMBLY
140
PAGE 10
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
140
22
PAGE 11
V-SELECT ASSEMBLY
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
V-SELECT ASSEMBLY
PAGE 12
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
115
94
10
94
11
PAGE 13
121
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
34
81
10
V-SELECT ASSEMBLY
BE SURE BUSHING (81) IS POSITIONED
AS SHOWN FOR PROPER GUIDE-ROD
ALIGNMENT.
PAGE 14
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
IMPORTANT
If you are installing a V HI-LO Option
refer to the V HI-LO owner's manual
and assemble the V HI-LO frame part
at this time.
107
94
10
17
94
121
PAGE 15
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
FOR INSTALLATION OF V LEG PRESS
OPTION, DISCARD PLATE (69).
*
IMPORTANT:
If you are installing a V Leg Press Option
refer to the V Leg Press owner's manual
and assemble the V Leg Press frame
parts at this time.
IMPORTANT:
If you are installing a V HI-LO Option
refer to the V HI-LO owner's manual
and assemble the V HI-LO frame parts
at this time.
*
69
116
94
19
69
94
121
V-SELECT ASSEMBLY
PAGE 16
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE (117)
THEN LOOSEN NUT JUST ENOUGH
FOR (20) TO PIVOT FREELY.
117
95
20
19
95
122
PAGE 17
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE (135)
THEN LOOSEN NUT JUST ENOUGH
FOR (14, 8) TO PIVOT FREELY.
8
14
36
36
135
95
19
95
136
V-SELECT ASSEMBLY
PAGE 18
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL HARDWARE FROM
PREVIOUS STEPS.
19
8
59
51
54
*IMPORTANT*
NOW THAT THE V-SELECT FRAME IS ASSEMBLED TAKE TIME TO ASSURE
THAT YOUR UNIT IS ASSEMBLED SQUARE AND PERPENDICULAR. USE A LEVEL TO
CHECK THAT THE GUIDE RODS ARE PERPENDICULAR IN BOTH DIRECTIONS. IF NOT,
IT WILL BE NECESSARY TO LOOSEN SOME FRAME HARDWARE TO RE-ALIGN THE
FRAME AND RETIGHTEN BOLTS.
PAGE 19
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
10
62
V-SELECT ASSEMBLY
PAGE 20
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
PART ORIGINALLY INCLUDED
* THIS
IN V-PRESS ARM UNIT.
* 026-01X5083
PRESS ARM HANGER ASSEMBLY
10
62
PAGE 21
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
*011-0007097
1/4"-20UNC X .75" SHCS (BZ)
NOTE:
- WRENCH TIGHTEN HARDWARE.
THIS PART ORIGINALLY INCLUDED
IN V-PRESS ARM UNIT.
*
10
* 026-1X5083
PRESS ARM HANGER ASSEMBLY
* 014-0019005-1
T SPLIT COLLAR THREADED 1.00" I.D. X 20mm
V-SELECT ASSEMBLY
PAGE 22
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
CABLING PROFILE VIEW
NOTE:
BE SURE CABLE RUNS
BETWEEN THE PULLEYS AND
GUARD RODS AS SHOWN.
CABLE
65
80
31
NOTE:
WHEN ADJUSTING CABLE FOR
PROPER TENSION, INSURE THAT
BOTH PLATES (65) ARE RESTING
UNDER THE BUMPERS STOP (80)
AS SHOWN.
PAGE 23
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
PROPERLY INSTALLED VIEW
NOTE:
- WRENCH TIGHTEN HARDWARE.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
BE SURE TO POSITION
CABLE (31) BETWEEN
PULLEY (45) AND
GUARD BAR AS SHOWN
64
GUARD BAR
45
64
45 PULLEY
10
10
31
115
94
CABLE BOLT
94
121
LANYARD
JAM NUT
FINE TUNING:
LOOSEN JAM NUT AND THREAD
BOLT IN/OUT TO GIVE THE CABLE
PROPER TENSION. RE-TIGHTEN
JAM NUT.
WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
31
143 1/8" 3635
V-SELECT ASSEMBLY
PAGE 24
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
108
94
10
65
94
121
44
PAGE 25
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
44
115
CABLE GUARD BOLT
94
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
31
115
58
94
10
121
BE SURE TO POSITION
CABLE (31) BETWEEN
PULLEY (44) AND GUARD
BOLT (115) AS SHOWN.
58
44
115
121
31
PROPERLY INSTALLED VIEW
V-SELECT ASSEMBLY
PAGE 26
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
110
94
31
11
94
47
121
PAGE 27
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
THIS PART ORIGINALLY INCLUDED
IN V-PRESS-ARM UNIT.
*
108
*
94
94
121
31
44
V-SELECT ASSEMBLY
PAGE 28
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
PROPERLY INSTALLED VIEW
47
31
121
96
47
31
96
114
PAGE 29
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
THIS PART ORIGINALLY INCLUDED
IN V-PRESSARM UNIT.
PROPERLY INSTALLED VIEW
*
31
44
*
121
94
*
94
108
44
31
V-SELECT ASSEMBLY
PAGE 30
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
31
44
115
10
58
PROPERLY INSTALLED VIEW
58
BE SURE TO POSITION
CABLE (31) BETWEEN
PULLEY (44) AND
GUARD BAR AS SHOWN
121
GUARD BAR
31
44
PAGE 31
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
115
94
94
10
121
3
V-SELECT ASSEMBLY
PAGE 32
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
PROPERLY INSTALLED VIEW
46
46
BE SURE TO POSITION
CABLE (31) BETWEEN
PULLEY (46) AND
GUARD BAR AS SHOWN
31
115
94
GUARD BAR
31
94
121
PAGE 33
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
CABLING PROFILE VIEW
30
V-SELECT ASSEMBLY
PAGE 34
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
11
FINE TUNING:
LOOSEN JAM NUT AND THREAD
BOLT IN/OUT TO GIVE THE CABLE
PROPER TENSION. RE-TIGHTEN
JAM NUT.
WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
JAM NUT
JAM BOLT
11
108
30
94
44
4
94
121
94 1/4" 2394
30
PAGE 35
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
112
60
11
30
60
47
121
V-SELECT ASSEMBLY
PAGE 36
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
PROPERLY INSTALLED VIEW
118
90
95
111
11
13
94
BE SURE PULLEY BRACKET (71)
IS INSTALLED AT A RIGHT ANGLE,
AS SHOWN.
47
30
71
94
121
PAGE 37
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
110
30
99
94
11
47
V-SELECT ASSEMBLY
PAGE 38
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
108
94
PROPERLY INSTALLED VIEW
65
94
121
44
65
30
30
44
PAGE 39
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
FINE TUNING:
LOOSEN JAM NUT AND THREAD
BOLT IN/OUT TO GIVE THE CABLE
PROPER TENSION. RE-TIGHTEN
JAM NUT.
30
WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
JAM BOLT
JAM NUT
73
30
4
V-SELECT ASSEMBLY
73
PAGE 40
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
CABLING PROFILE VIEW
32
PAGE 41
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
PROPERLY INSTALLED VIEW
POSITION CABLE (32) THROUGH QUICK
RELEASE (55) IN ORDER TO SECURE
CABLE TO LEG EXTENSION ASSEMBLY (8).
55
32
8
79
32
55
8
63 2/3" 1617
V-SELECT ASSEMBLY
32
PAGE 42
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
32
19
47
CABLE (32) IS FED THROUGH
THE FRAME (19) AS SHOWN
110
94
19
32
94
47
PAGE 43
121
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
47
32
19
47
CABLE (32) IS FED THROUGH
THE FRAME (19) AS SHOWN
110
94
19
94
47
121
32
V-SELECT ASSEMBLY
PAGE 44
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
CABLE (32) IS FED THROUGH
THE FRAME (19) IN PREVIOUS
STEPS AS SHOWN
47
19
47
47
BE SURE TO POSITION
CABLE (32) BETWEEN
PULLEY (47) AND GUARD
BOLT (110) AS SHOWN
32
GUARD BOLT
110
94
47
110
GUARD BOLT
32
19
94
121
PAGE 45
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
32
47
47
115 GUARD BOLT
BE SURE TO POSITION
CABLE (32) BETWEEN
PULLEY (47) AND
PREVIOUSLY INSTALLED
GUARD BOLT (115) AS SHOWN
115
32
PROPERLY INSTALLED VIEW
57
63
32
121
47
19
GUARD BOLT
V-SELECT ASSEMBLY
115
PAGE 46
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN CABLE ASSEMBLY
(32) TO SECURE ONTO (4).
FINE TUNING:
LOOSEN JAM NUT AND THREAD
BOLT IN/OUT TO GIVE THE CABLE
PROPER TENSION. RE-TIGHTEN
JAM NUT.
4
JAM NUT
WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
JAM BOLT
32
47
PAGE 47
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
CABLING PROFILE VIEW
IMPORTANT:
If you are installing a V HI-LO Option, do not
install cable (29). Refer to the V HI-LO owner's
manual and follow assembly steps to install
CABLE ASSEMBLY: V HI-LO AB 167.91" LG.
(item #1 in V HI-LO owner's manual) in place
of cable (29).
29
V-SELECT ASSEMBLY
PAGE 48
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- WRENCH TIGHTEN HARDWARE.
121
94
20
94
47
110
PAGE 49
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN HARDWARE.
94
94
121
47
110
29
129 1/16" 3278
V-SELECT ASSEMBLY
29
PAGE 50
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN HARDWARE.
109
94
4
44
94
121
29
PAGE 51
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN HARDWARE.
PROPERLY INSTALLED VIEW
JAM NUT
CABLE BOLT
22
70
57
63
121
116
47
29
66
FINE TUNING:
LOOSEN JAM NUT AND THREAD
BOLT IN/OUT TO GIVE THE CABLE
PROPER TENSION. RE-TIGHTEN
JAM NUT.
WARNING - CABLE BOLT MUST BE THREADED
A MINIMUM OF 3/8" WITH JAM NUT TIGHTENED
SECURELY TO ENSURE PROPER CONNECTION.
66
116
63
70
47
22
57
121
V-SELECT ASSEMBLY
PAGE 52
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN HARDWARE.
110
94
94
121
47
29
PAGE 53
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- WRENCH TIGHTEN HARDWARE.
PROPERLY INSTALLED VIEW
114
BE SURE TO POSITION
CABLE (29) BETWEEN
PULLEY (47) AND
CABLE GUARD BOLT (114)
AS SHOWN
47
CABLE GUARD BOLT
47
114
96
29
11
96
121
V-SELECT ASSEMBLY
PAGE 54
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
12
19
PAGE 55
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
27
21
93
101
V-SELECT ASSEMBLY
PAGE 56
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
27
103
19
PAGE 57
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
28
23
93
101
V-SELECT ASSEMBLY
PAGE 58
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
11
23
103
PAGE 59
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL HARDWARE FROM
PREVIOUS STEPS.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
14
52
89
56
89
106
8
38
89
89
52
56
106
6
V-SELECT ASSEMBLY
PAGE 60
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
94
17
99
104
68
19
94
99
67
104
PAGE 61
V-SELECT ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN ALL SHIELD HARDWARE
FROM PREVIOUS STEPS.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
68
17
94
99
123
104
94
99
104
V-SELECT ASSEMBLY
PAGE 62
OWNER'S MANUAL
ACCESSORIES/MISC
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
2
50
15
15
7
50
139
1
50
50
134
PAGE 63
138
V-SELECT ASSEMBLY
OWNER'S MANUAL
PRE-ASSEMBLY
39
40
79
10
39
40
8
83
80
21
35
25
78
43
98
92
84
42
100
12
119
75
42
16
102
41
82
75
73
11
12
48
37
48
19
20
37
V-SELECT ASSEMBLY
PAGE 64
OWNER'S MANUAL
DECAL PLACEMENT
NOTE:
- ALL DECALS ARE CENTERED
UNLESS OTHERWISE STATED.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
IF USING THE STANDARD 150LB.
WEIGHT STACK, SET ASIDE WEIGHT
STACK NUMBER DECALS 16-20.
THESE ARE USED IN THE OPTIONAL
200 LB WEIGHT STACK.
132
*
123
132
133
127
* 128
130
129
131
PAGE 65
126
125
124
V-SELECT ASSEMBLY
OWNER'S MANUAL
DECAL REFERENCE
021-0003673
021-0003341
021-0003232
SERIAL # DECAL
021-0003322
021-0018022
021-0003675
V-SELECT ASSEMBLY
PAGE 66
OWNER'S MANUAL
DECAL REFERENCE CONTINUED
021-0003965
021-0004101
021-0003008
021-0003135
PAGE 67
V-SELECT ASSEMBLY
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
V-SELECT ASSEMBLY
PAGE 68
OWNER'S MANUAL
PART LIST
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
1
2
3
4
5
6
7
8
10
11
12
13
14
15
16
17
19
20
21
22
23
25
27
28
29
30
31
32
34
35
36
37
38
39
PAGE 69
PART NUMBER
026-01X1118
026-01X1119
026-01X1404
026-01X1414
026-01X1419
026-01X1425
026-01X6020
026-01X2028
026-01X7239
026-01X5163
026-01X3160
026-01X3177
026-01X4052
026-01X5760
026-01X5007
026-01X7241
026-01X7238
026-01X5079
026-01X5080
026-01X7122
026-01X5096
020-0014027
022-01PD2301-A
022-01PD2304-A
010-01C0372
010-01C0373
010-01C0374
010-01C0375
011-0112002
012-0305003
013-0102006
014-0003003
014-0011001
014-0101002
DESCRIPTION
ALUMINUM CURL BAR ASSEMBLY
ALUMINUM LAT BAR ASSEMBLY
BAR MOUNT ASSEMBLY
ADJ. FLOATING PULLEY HOUSING ASSEMBLY
FRAME BASE ASSEMBLY
ROLLER MOUNT ASSEMBLY
FLEECE KNEE STRAP WITH (1) D-RING & 2 SQ. RINGS ASSEMBLY
LEG EXTENSION ARM ASSEMBLY
TOP MAIN FRAME ASSEMBLY
MAIN UPRIGHT ASSEMBLY
RATCHET PULL-PIN ASSEMBLY
WIDE ADJ. FLOATING PULLEY HOUSING ASSEMBLY
ROLLER MOUNT W/ ROM ASSEMBLY
STRAP HANDLE WITH (3) O-RINGS (LOWER) ASSEMBLY
ACCESSORY RACK ASSEMBLY
SHIELD MOUNT - TOP ASSEMBLY
SEAT FRAME ASSEMBLY
SWIVEL PULLEY ASSEMBLY
SEAT PAD ASSEMBLY
ANTI-TWIST CABLE ANCHOR
BACK PAD ADJUSTER ASSEMBLY
ADJUSTABLE STOP
SEAT PAD ASSEMBLY
PAD ASSEMBLY
CABLE ASSEMBLY: V BASE AB 129.06" LG.
CABLE ASSEMBLY: V BASE FLOATING PULLEY 94.25" LG.
CABLE ASSEMBLY: V BASE PULL DOWN 143.13" LG.
CABLE ASSEMBLY: V SELECT BASE LEG EXTENSION 63.66" LG.
1/2" X .500" SHSS (WZ)
3/8"-16UNC JAM NUT (WZ)
1/2" FLAT NYLON WASHER
BEARING: FLANGED BALL BEARING
.50" I.D.
NYLINER BUSHING: Ø 1.09" O.D. X Ø 1.00" I.D X 1.13" LG.
BUSHING: OILITE FLANGED Ø.75" O.D X Ø.50" I.D X .38" LG.
QTY
1
1
1
2
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
2
2
2
V-SELECT ASSEMBLY
OWNER'S MANUAL
PART LIST CONTINUED
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
62
63
64
65
66
67
68
69
70
71
73
75
77
PART NUMBER
014-0101005
014-0101014
016-0002007
016-0201004
018-0001002
018-0001003
018-0002014
018-0002015
019-0001001
019-0001006
020-0010002
020-0011009
022-01PDR008
026-01G0177
026-01M0128-1
026-01M0200
026-01M0238
026-01M0760
026-01M0761
026-01M0849
026-01M0863
026-01M2268
026-01M2539
026-01M2553
026-01P1689
026-01P3368
026-01P6594
026-01P6593
026-01P6119
026-01P6073
026-01P6075
026-01P6098
026-01PL0125
026-01PL0369
V-SELECT ASSEMBLY
DESCRIPTION
BUSHING: OILITE FLANGED Ø1.38" O.D. X Ø1.00" I.D. X .81" LG.
FLANGED OILITE 0.75" I.D. X .60" L.G.
VINYL SLEEVE Ø.38" X 1.63"
END CAP 1.50" X 1.50" (BLACK)
CABLE PULLEY: Ø3.50"
CABLE PULLEY: Ø4.50"
CABLE PULLEY: WIDE (BORED HUB) Ø4.50"
CABLE PULLEY: WIDE (BORED HUB)
3.50"
PLUG BUMPER
THICK RUBBER DONUT 3.00" X .50" BLACK
SNAP LINK
SPRING
ROLLER PAD 4.00" X 7.00" LG.
GUIDE ROD Ø.75" X 71.44" LG.
PULL PIN CAP
QUICK RELEASE CABLE LOCK Ø.34" I.D. X 1.00"LG.
FLATHEAD CAP Ø2.00" ALUM.
HEAVY FLANGED SPACER: Ø.67 O.D. X Ø.39 I.D. X .50 LG.
HEAVY FLANGED SPACER: Ø.39" I.D X 1.69" LG.
PUSH PIN PLUNGER Ø.61 CRS X 3.19" LG.
HEAVY FLANGED SPACER:
.39" I.D. X .38" LG.
SHAFT: Ø 1.00 X 6.56" LG.
HEAVY FLANGED SPACER Ø.39" I.D. X 2.36" LG.
SPACER .75" O.D. X .39" I.D. X 1.50" LG.
DOUBLE PULLEY MOUNT PLATE
GUSSET PLATE
SHIELD-2
SHIELD-1
BACKING PLATE
PULLEY PLATE
BRKT-U
ANTI-TWIST BRKT
E-Z GLIDE PLASTIC SLEEVE
WEIGHT STAND OFF
QTY
2
1
2
1
8
1
1
14
2
2
4
1
4
2
1
2
4
4
4
1
2
1
2
2
2
2
1
1
2
1
1
1
4
2
PAGE 70
OWNER'S MANUAL
PART LIST CONTINUED
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
78
79
80
81
82
83
84
85
89
90
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
PAGE 71
PART NUMBER
026-01PL0371
026-01PL0380
026-01PL0381
026-01PL2201
026-01PL2245
026-01PL2316
026-01PL2413
026-01PL2422
26-STD-06-0481
WS#22
013-0002003
013-0302008
013-0402007
013-0102003
013-0102028
013-0102020
013-0102023
013-0102022
011-0102008
011-0107011
011-0101107
011-0311013
011-0101041
011-0107020
011-0002033
011-0107037
011-0407027
011-0407058
011-0107026
011-0107009
011-0007050
011-0407026
011-0407025
DESCRIPTION
DELRIN BUSHING
BLACK NYLON THREADED CAP
BUMPER, HALF ROUND, DUAL STEM
PLASTIC SLEEVE .75" O.D.
PLASTIC FLANGED BUSHING Ø.75" O.D X Ø.50" I.D X .38" LG.
ENDCAP (DOMED) - GREY 1.00"
SLOT COVER
STOP DISK
ROLLER PAD BUSHING
150 LBS. STACK (8.25 LBS. TOP PLATE W/ 20 HOLE STEM)
1/4" X 16mm SAE FLAT WASHER (WZ)
5/16" SAE FLAT WASHER (WZ)
3/8" X 22mm FLAT WASHER (WZ)
1/2" X 27mm SAE FLAT WASHER (WZ)
3/8" CURVED WASHER (WZ)
3/8" SPLIT LOCK WASHER (WZ)
1/4" INTERNAL LOCK WASHER (WZ)
3/8" INTERNAL LOCK WASHER (WZ)
1/4"-20UNC X.75" BHCS (WZ)
5/16"-18UNC X 1.25" HHB (WZ)
3/8"-16UNC X .50" BHCS (WZ)
3/8-16UNC X .75" SQUARE HEAD (WZ)
3/8"-16UNC X .75" BHCS (WZ)
3/8"-16UNC X 3.25" HHB (WZ)
3/8"-16UNC X 1.25" FHCS (WZ)
3/8"-16UNC X 1.25" HHB (WZ)
3/8"-16UNC X 1.75" HHB (WZ)
3/8"-16UNC X 2.00" HHB (WZ)
3/8"-16UNC X 2.25" HHB (WZ)
3/8"-16UNC X 2.50" HHB (WZ)
3/8"-16UNC X 2.75" HHB (WZ)
3/8"-16UNC X 3.00" HHB (WZ)
3/8"-16UNC X 4.00" HHB (WZ)
QTY
1
1
1
2
1
1
1
1
8
1
2
6
81
5
6
2
2
9
2
6
1
2
8
2
4
4
5
1
9
1
1
4
3
V-SELECT ASSEMBLY
OWNER'S MANUAL
PART LIST CONTINUED
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO.
115
116
117
118
119
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
138
139
140
141
PART NUMBER
011-0107022
011-0407070
011-0407000
011-0407047
011-0101085
012-0104008
012-0304011
021-0003673
021-0003135
021-0003008
SERIAL # DECAL
021-0003341
021-0003965
021-0003232
021-0003322
021-0004101
021-0018022
021-0003675
020-0014028
011-0107079
012-0105008
022-0008032
002-0001013
DESCRIPTION
3/8"-16UNC X 5.00" HHB (WZ)
3/8"-16UNC X 5.25" HHB (WZ)
1/2"-13UNC X 3.50" HHB (WZ)
1/2"-13UNC X 4.00" HHB (WZ)
1/2"-13UNC X .50" BHCS (WZ)
3/8"-16 UNC THIN NYLOCK NUT (WZ)
1/2"-13 UNC THIN NYLOCK NUT (WZ)
DECAL V-SELECT BADGE
DECAL WARNING 1.50" X 7.75"
DECAL COMMERCIAL MAINTENANCE 1.50 X 6.69
DECAL HOIST SERIAL # 1.63" X 2.63"
DECAL PINCH POINT 1.07" X 2.13" (HORIZONTAL)
DECAL: WEIGHT STACK 22 (10-200 LBS.)
DECAL PUSH TO ADJUST
DECAL PINCH POINT 1.25" X 2.31" (VERTICAL)
DECAL ADJUST 1-8 VERTICAL
DECAL HOISTFITNESS.COM LOGO
DECAL V BACK ADJUSTER
14 LINK CHAIN
1/2"-13UNC X 3.78" (96mm) HHB (WZ) W/ NYLON PATCH
1/2"-13 ACORN NUT (WZ)
AB STRAP
1cc of Synthetic Multi-Purpose Grease (PTFE)
010-01C0666
026-01PL2393
ANTI-TWIST CABLE: 34.76" LG.
3.00" X .81" ID X.313" T SPACER
V-SELECT ASSEMBLY
QTY
14
3
1
1
1
44
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
2
PAGE 72
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 73
V-SELECT ASSEMBLY
OWNER'S MANUAL
ABBREVIATIONS
BZ = Black Zinc
Ni = Nickel Plated
SS = Stainless Steel
WZ = White Zinc
HHB = Hex Head Bolt
FHCS = Flat Head Cap Screw
BHCS = Button Head Cap Screw
SHCS = Socket Head Cap Screw
Low Head SHCS = Low Head Socket
Head Cap Screw
SHSS = Socket Head Shoulder Screw
V-SELECT ASSEMBLY
PAGE 74
OWNER'S MANUAL
BOLT SIZING CHART
5/16" HHB
3/8" BHCS
RECOMMENDED
TORQUE RANGE:
9-12 ft-lbs
RECOMMENDED
TORQUE RANGE:
18-23 ft-lbs
5/16" SHCS
3/8" SHCS
PAGE 75
5 1/2"
4 3/4"
4 1/2"
4 1/4"
4"
3 3/4"
3 1/2"
3 1/4"
3"
2 3/4"
2 1/2"
2 1/4"
2"
1 1/2"
1 1/4"
1 3/4"
5/16" SHSS
RECOMMENDED
TORQUE RANGE:
8-10 ft-lbs
5 1/4"
RECOMMENDED
TORQUE RANGE:
47-65 ft-lbs
RECOMMENDED
TORQUE RANGE:
19-26 ft-lbs
1"
3/4"
0"
1/4" SHSS
1/2" FHCS
3/8" FHCS
1/4" FHCS
5"
3 1/4"
3"
RECOMMENDED
TORQUE RANGE:
39-49 ft-lbs
2 3/4"
2 1/2"
2 1/4"
2"
1 3/4"
1 1/4"
1"
3/4"
1 1/2"
RECOMMENDED
TORQUE RANGE:
23-29 ft-lbs
RECOMMENDED
TORQUE RANGE:
5-7 ft-lbs
RECOMMENDED
TORQUE RANGE:
3-4 ft-lbs
RECOMMENDED
TORQUE RANGE:
40-50 ft-lbs
4 3/4"
1/4" SHCS
RECOMMENDED
TORQUE RANGE:
11-14 ft-lbs
1/2"
LOW HEAD
SHCS
4 1/2"
RECOMMENDED
TORQUE RANGE:
4-6 ft-lbs
3/8"
LOW HEAD
SHCS
4 1/4"
5/16"
LOW HEAD
SHCS
RECOMMENDED
TORQUE RANGE:
47-65 ft-lbs
4"
1/4"
LOW HEAD
SHCS
1/2" BHCS
RECOMMENDED
TORQUE RANGE:
19-26 ft-lbs
3 3/4"
RECOMMENDED
TORQUE RANGE:
11-15 ft-lbs
1/2" HHB
RECOMMENDED
TORQUE RANGE:
60-75 ft-lbs
RECOMMENDED
TORQUE RANGE:
24-30 ft-lbs
5/16" BHCS
1/4" BHCS
RECOMMENDED
TORQUE RANGE:
5-7 ft-lbs
0"
3/8" HHB
RECOMMENDED
TORQUE RANGE:
14-17 ft-lbs
3 1/2"
1/4" HHB
RECOMMENDED
TORQUE RANGE:
6-8 ft-lbs
3/8" SHSS
RECOMMENDED
TORQUE RANGE:
17-22 ft-lbs
V-SELECT ASSEMBLY
OWNER'S MANUAL
WASHER SIZING CHART
013-0002003
1/4"
FLAT WASHER
SMALL, SAE, 13mm
013-0102028
3/8"
CURVED WASHER
013-0102004
5/16"
FLAT WASHER
LARGE, USS, 22mm
013-0002004
3/8"
FLAT WASHER
SMALL, SAE, 21mm
013-0402007
3/8"
FLAT WASHER
22mm O.D.
013-0102019
1/4"
LOCK WASHER
026-01M0238
2" ALUMINUM
FLATHEAD CAP
013-0402005
3/8"
FLAT WASHER
LARGE, USS, 25mm
013-0102020
3/8"
LOCK WASHER
016-0009003
1" SHIM WASHER
013-0003004
1 1/16"
FENDER WASHER
013-0102003
1/2"
FLAT WASHER
SMALL, SAE, 27mm
013-0102018
1/2"
LOCK WASHER
013-0102026
1/2"
FLAT WASHER
LARGE, USS, 34mm
014-0018001
1/2" LONG
SPACER
013-0003002
3/8" FENDER WASHER
026-01PL151
PLASTIC 1 1/16"
FENDER WASHER
014-0018002
1" LONG
SPACER
V-SELECT ASSEMBLY
PAGE 76
OWNER'S MANUAL
WASHER SIZING CHART
(CONTINUED)
026-01M0211
1/4" LONG
FLANGED SPACER
026-01M211T
1/4" LONG HEAVY
FLANGED SPACER
026-01M0788
.81" LONG HEAVY
FLANGED SPACER
026-01M0789
.44" LONG HEAVY
FLANGED SPACER
026-01M0600
.625" LONG
FLANGED SPACER
PAGE 77
026-01M0198
1/2" LONG
FLANGED SPACER
026-01M0532
11/16" LONG HEAVY
FLANGED SPACER
026-01M0780
.65" LONG HEAVY
FLANGED SPACER
026-01M0762
1 1/2" LONG HEAVY
FLANGED SPACER
026-01M0240
1 3/8" ALUMINUM
FLATHEAD CAP
026-01M0760
1/2" LONG HEAVY
FLANGED SPACER
026-01M0551
1" LONG HEAVY
FLANGED SPACER
026-01M0761
1 11/16" LONG HEAVY
FLANGED SPACER
026-01M0768
1 1/4" LONG HEAVY
FLANGED SPACER
026-01M0239
1 5/8" ALUMINUM
FLATHEAD CAP
V-SELECT ASSEMBLY
OWNER'S MANUAL
MAINTENANCE SCHEDULE
ROUTINE
COMMERCIAL /
HOME
LIGHT COMMERCIAL
MAINTENANCE
MAINTENANCE
Inspect;
Links, Pull Pins, Snap Locks,
Swivels, Weight Stack Pins
DAILY
WEEKLY
Clean;
Upholstery
DAILY
WEEKLY
Inspect;
Cables or Belts and their
tension
DAILY
WEEKLY
Inspect;
Accessory Bars, and Handles
WEEKLY
3 MONTHS
Inspect;
All Decals
WEEKLY
3 MONTHS
WEEKLY
3 MONTHS
WEEKLY
3 MONTHS
Clean & Lubricate;
Guide Rods with a Teflon (PTFE)
based lubricant (Superlube)
MONTHLY
3 MONTHS
Lubricate;
Seat Sleeves, Turcite Bushings,
Linear Bearing
MONTHLY
3 MONTHS
Clean and Wax;
All Glossy Finishes
6 MONTHS
YEARLY
Repack with Grease;
Linear Bearings
6 MONTHS
YEARLY
YEARLY
3 YEARS
Inspect;
All Nuts and Bolts, Tighten if needed
Inspect;
Anti-Skid Surface
Replace;
Cables, Belts and Connecting Parts
LATEST DATE ENTRY
Your equipment comes with a commercial maintenance decal.
For personal, in home use, please follow the home maintenance schedule listed above.
Never use ammonia, acid-based, or petroleum-based solvents on
any portion of the machine as it may damage the finish.
V-SELECT ASSEMBLY
PAGE 78
OWNER'S MANUAL
HOIST FITNESS SYSTEMS
GENERAL MAINTENANCE INFORMATION
Links, Pull-Pins, Snap Hooks, Swivels, Weight Stack Pins:
*Check all pieces for signs of visible wear or damage.
*Check springs in snap hooks and pull-pins for proper tension and alignment.
*If the spring sticks or has lost its rigidity, replace it immediately.
Upholstery:
*To ensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped down with a damp cloth after every workout.
*Periodically take the time to use a mild soap or an approved vinyl upholstery cleaner to deter the onset of cracking or drying. Avoid using any
abrasive cleaners or cleaners not intended for use on vinyl.
*Replace ripped or warn upholstery immediately.
*Keep sharp or pointed objects clear of all upholstery.
Decals:
*Inspect and familiarize yourself with any safety warnings or other user information posted on each decal.
Nuts and Bolts:
*Inspect all nuts and bolts for any loosening and tighten if needed.
*Go through a re-tightening sequence periodically to ensure that all hardware is tensioned proper.
Anti-Skid Surfaces:
*These surfaces are designed to supply secure footing and need to be replaced if they appear worn or become slippery.
Belts and Cables:
*Hoist uses only high quality belt, and mil-spec cables.
*Visually inspect the belts and cables for fraying, cracking, peeling or discoloration.
*While the machine is not in use, carefully run your fingers along the belt or cable to feel for thinning or bulging areas.
*Replace belts and cables immediately at the first signs of damage or wear. Do not use equipment until belts or cables have been replaced.
Belt and Cable Tension:
*Referring to the Owners Manual, when belts or cables are used check all bolts attachments to be sure they are properly attached.
*Check slack in cables and re-adjust cable tension if needed.
Seat Sleeves, Guide Rods:
*Wipe down adjusting tubes with a dust free rag before applying lubricant.
*Lubricate seat sleeves and Guide Rods with a Silicon or Teflon based lubricant spray.
Linear Bearings:
*Referring to the Owners Manual carefully disassemble the bearing from its housing and place a finger full of light grease (lithium, super lube,
etc.) into the inside of the bearing. Using your finger, press the grease into the ball-bearings and their tracks. repeat until the ball-bearing
tracks are full of grease. Insert the shaft back into the bearing and wipe off excess grease.
PLEASE KEEP THIS FOR YOUR RECORDS
PAGE 79
V-SELECT ASSEMBLY
OWNER'S MANUAL
WEIGHT TRAINING TIPS
Use this manual to guide you through the basic exercises you can perform on
your V-SELECT HOIST® Fitness System. To gain maximum results and avoid
possible injury, consult a fitness professional to develop your complete exercise
program.
Always consult your physician before starting any exercise program.
To be successful in your exercise program, it is important to develop an
understanding of the basic principles of strength training. Now that you have
your V-SELECT HOIST® Fitness System, it is only natural that you want to get
started immediately. First, determine a set of realistic goals and objectives for
yourself. By deciding on an exercise plan that is right for you prior to starting,
you will contribute significantly to your success.
Warm up properly before engaging in weight resistance training. Stretching,
yoga, jogging, calisthenics or other cardiovascular exercise can help prepare
your body for the heavier workload of lifting weights.
Learn how to perform the exercise correctly before using heavy weight.
Correct form is important to avoid injury and to ensure that you work the proper
muscle groups.
Know your limitations. If you are new to weight training or are embarking on
an exercise regimen after a long layoff, start slowly and build foundational
strength over a longer period of time.
Pay attention to your breathing. Exhale when you exert is a general rule of
thumb. Never hold your breath.
Enjoy your V-SELECT HOIST® Fitness System!
V-SELECT ASSEMBLY
PAGE 80
OWNER'S MANUAL
WEIGHT RATIOS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
100%
50%
120%
12
24
36
48
60
72
84
96
108
120
132
144
156
168
180
192
204
216
228
240
100%
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
50%
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
NOTE:
16-20 ARE USED
WITH THE 200 LBS
OPTION
NOTE:
SHOWN WITH
150 LBS WEIGHT
STACK OPTION
50%
120%
The above chart shows the standard weight stack for this unit. The weights
listed are approximate. HOIST reserves the right to modify the machine without
prior notice.
PAGE 81
V-SELECT ASSEMBLY
OWNER'S MANUAL
Date
Exercise
Totals
S = Sets R = Repetition per set W = Weight used
WEIGHT TRAINING EXERCISE LOG
S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W S R W
PAGE 82
V-SELECT ASSEMBLY
OWNER'S MANUAL
HOIST FITNESS SYSTEMS
LIMITED LIFETIME WARRANTY
Hoist Fitness Systems warrants this product to the original purchaser to be free from defects in workmanship and/or
materials under normal use or service. If at any time a component part is defective, Hoist Fitness Systems shall repair or replace it
(at Hoist Fitness Systems option) within a reasonable period of time. This warranty does not cover costs of removal, transportation
or reinstallation. This warranty shall not apply if the defect was caused by misuse, neglect or normal wear and tear.
WARRANTY CLAIMS. All claims require: Model number, Serial number, Date of installation, and any
information supporting the existence of the alleged defect.
To complete Warranty Registration visit:
www.HOISTFITNESS.com
and click on the Warranty Registration link
Starting from the original date of purchase, normal wear and tear shall be considered as the following:
COMMERCIAL USE: All malfunctions of upholstery, grips, and coatings that occur up to one year; all malfunctions of belts, or
cables up to one year; all malfunctions of pulleys, bearings, or bushings that occur up to three years. The frame and body
components are warranted for ten years, with structural moving parts warranted for five years.
LIGHT COMMERCIAL USE: All malfunctions of upholstery, grips, and coatings that occur up to one year; all malfunctions of
belts, or cables up to one year; all malfunctions of pulleys, bearings, or bushings that occur up to three years. The frame and body
components are warranted for ten years, with structural moving parts warranted for five years.
HOME USE: All malfunctions of grips, paint, and chrome that occur up to ten years; all malfunctions of electronic components,
belts, cables, or upholstery that occur up to ten years; all malfunctions of pulleys, bearings, or bushings that occur up to ten years.
The frame and all welded components are warranted for the life of the product.
PLEASE NOTE THAT NOT ALL HOIST PRODUCTS ARE MADE FOR COMMERCIAL USE. Refer to the instructions page of
your owners manual or consult with you fitness product dealer to establish if a product is made for commercial use or not. Using a
non-commercial product in a commercial setting can result in serious injury or death! Hoist Fitness Systems sole responsibility
shall be to repair or replace the component within the terms stated above. Hoist Fitness Systems shall not be liable for any loss or
damage of any kind including any incidental or consequential damages resulting, directly or indirectly from any warranty
expressed or implied or any other failure of this product.
LIGHT COMMERCIAL USE: Our Light Commercial warranty applies to facilities that DO NOT charge monthly membership dues
and where the equipment would be used by no more than 50 people per day. Examples of Light Commercial facilities include
hotels, apartment complexes, personal training studios, fire stations, police stations, etc., that meet the criteria stated above.
WHAT IS NOT COVERED BY THIS WARRANTY: Hoist's sole obligation under this warranty is limited to either repair or
replacement of parts, subject to the additions below. This warranty neither assumes nor authorizes any person to assume
obligations other than expressly covered by this warranty.
NO CONSEQUENTIAL DAMAGES: Hoist is not responsible for economic loss; profit loss; or special, indirect, or consequential
damages.
WARRANTY IS NOT TRANSFERABLE: This warranty is not assignable and applies only in favor of the original purchaser/user
to whom delivered. Any such assignment or transfer shall void the warranties herein made and shall void all warranties,
expressed, implied or statutory, except the one (1) and five (5) year warranties described above. These warranties are exclusive
and in lieu of all other warranties, including implied warranty and merchantability or fitness for a particular purpose. There are no
warranties which extend beyond the description on the face hereof.
TRANSPORTATION COSTS: Hoist will accept parts covered under this warranty freight collect, provided that shipment has
received prior approval. Hoist is not responsible for any other transportation costs, but will ship freight collect parts either repaired
or replaced under these warranties.
Hoist Fitness Systems
11900 Community Rd.
Poway, CA. 92064
(800)548-5438
PLEASE KEEP THIS FOR YOUR RECORDS
PAGE 83
V-SELECT ASSEMBLY
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising