Yamaha | PSR-SX900 | Owner's Manual | Yamaha PSR-SX900/PSR-SX700 Owner's Manual

Yamaha PSR-SX900/PSR-SX700 Owner's Manual
English
Français
Digital Workstation
Clavier Arrangeur Professionnel
Owner’s Manual
Mode d'emploi
Thank you for purchasing this Yamaha Digital Workstation!
This electric keyboard for professional entertainers not only has a wide selection of Voices and versatile functions
but also gives you the potential of expanding content for the instrument.
We recommend that you read this manual carefully so that you can fully take advantage of the advanced and
convenient functions of the instrument. We also recommend that you keep this manual in a safe and handy place
for future reference.
Before using the instrument, be sure to read “PRECAUTIONS” on pages 5–6.
Merci d'avoir choisi ce Clavier Arrangeur Professionnel Yamaha !
Ce clavier électrique destiné aux professionnels dispose d’une large sélection de sonorités et de fonctions
polyvalentes et offre un potentiel considérable pour l’élargissement des contenus de l'instrument.
Nous vous conseillons de lire attentivement ce mode d'emploi afin de tirer pleinement profit des fonctions
avancées et très utiles de votre instrument. Nous vous recommandons également de garder ce manuel à portée
de main pour toute référence ultérieure.
Avant d'utiliser l'instrument, lisez attentivement la section « PRÉCAUTIONS D'USAGE » aux pages 5 et 6.
EN
FR
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply
(adapter). DO NOT connect this product to any power supply or
adapter other than one described in the manual, on the name
plate, or specifically recommended by Yamaha.
WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not
recommended! If you must use an extension cord, the minimum
wire size for a 25’ cord (or less) is 18 AWG. NOTE: The smaller
the AWG number, the larger the current handling capacity. For
longer extension cords, consult a local electrician.
This product should be used only with the components supplied
or; a cart, rack, or stand that is recommended by Yamaha. If a
cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct
at the time of printing. However, Yamaha reserves the right to
change or modify any of the specifications without notice or obligation to update existing units.
This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound
levels that could cause permanent hearing loss. DO NOT operate
for long periods of time at a high volume level or at a level that is
uncomfortable. If you experience any hearing loss or ringing in the
ears, you should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period
before damage occurs.
Some Yamaha products may have benches and / or accessory
mounting fixtures that are either supplied with the product or as
optional accessories. Some of these items are designed to be
dealer assembled or installed. Please make sure that benches
are stable and any optional fixtures (where applicable) are well
secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No
other uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to
how a function or effect works (when the unit is operating as
designed) are not covered by the manufacturer’s warranty, and
are therefore the owners responsibility. Please study this manual
carefully and consult your dealer before requesting service.
Battery Notice:
This product MAY contain a small non-rechargeable battery which
(if applicable) is soldered in place. The average life span of this type
of battery is approximately five years. When replacement becomes
necessary, contact a qualified service representative to perform the
replacement.
This product may also use “household” type batteries. Some of
these may be rechargeable. Make sure that the battery being
charged is a rechargeable type and that the charger is intended for
the battery being charged.
When installing batteries, never mix old batteries with new ones, and
never mix different types of batteries. Batteries MUST be installed
correctly. Mismatches or incorrect installation may result in overheating and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all
batteries away from children. Dispose of used batteries promptly
and as regulated by the laws in your area. Note: Check with any
retailer of household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some
reason its useful life is considered to be at an end, please
observe all local, state, and federal regulations that relate to the
disposal of products that contain lead, batteries, plastics, etc. If
your dealer is unable to assist you, please contact Yamaha
directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The
model number, serial number, power requirements, etc., are
located on this plate. You should record the model number, serial
number, and the date of purchase in the spaces provided below
and retain this manual as a permanent record of your purchase.
Model
Serial No.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and
environmentally friendly. We sincerely believe that our products
and the production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the law, we
want you to be aware of the following:
92-BP (bottom)
2
Purchase Date
PLEASE KEEP THIS MANUAL
PSR-SX900/SX700 Owner’s Manual
COMPLIANCE INFORMATION STATEMENT
(Supplier’s declaration of conformity procedure)
Responsible Party :
Address :
Telephone :
Type of Equipment :
Model Name :
Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620
714-522-9011
Digital Keyboard
PSR-SX900/PSR-SX700
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference
that may cause undesired operation.
* This applies only to products distributed by
Yamaha Corporation of America.
(FCC SDoC)
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this
product in a residential environment will not result in harmful
interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used
according to the instructions found in the users manual, may
cause interference harmful to the operation of other electronic
devices. Compliance with FCC regulations does not guarantee
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.
that interference will not occur in all installations. If this product
is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected
by the interference.
Utilize power outlets that are on different branch (circuit breaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to distribute
this type of product. If you can not locate the appropriate
retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park,
CA90620
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
(class B)
PSR-SX900/SX700 Owner’s Manual
3
For the AC adaptor
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
1
2
3
4
5
6
7
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during
lightning storms or when unused for long periods of
time.
14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has
been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
(UL60065_03)
For the instrument
The model number, serial number, power requirements,
etc., may be found on or near the name plate, which is
at the bottom of the unit. You should note this serial
number in the space provided below and retain this
manual as a permanent record of your purchase to aid
identification in the event of theft.
Model No.
Serial No.
(bottom_en_01)
4
PSR-SX900/SX700 Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
For the AC adaptor
WARNING
CAUTION
• This AC adaptor is designed for use with only Yamaha electronic
instruments. Do not use for any other purpose.
• When setting up, make sure that the AC outlet is easily accessible. If
some trouble or malfunction occurs, immediately turn off the power
switch of the instrument and disconnect the AC adaptor from the
outlet. When the AC adaptor is connected to the AC outlet, keep in
mind that electricity is flowing at the minimum level, even if the power
switch is turned off. When you are not using the instrument for a long
time, make sure to unplug the power cord from the wall AC outlet.
• Indoor use only. Do not use in any wet environments.
For the instrument
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the
following:
immediately and unplug the power cord from the AC outlet. Then have
the instrument inspected by qualified Yamaha service personnel.
Power supply/AC adaptor
• Do not place the power cord near heat sources such as heaters or
radiators. Also, do not excessively bend or otherwise damage the cord,
or place heavy objects on it.
• Only use the voltage specified as correct for the instrument. The
required voltage is printed on the name plate of the instrument.
• Never insert or remove an electric plug with wet hands.
Fire warning
• Do not put burning items, such as candles, on the unit. A burning item
may fall over and cause a fire.
• Use the specified adaptor (page 119) only. Using the wrong adaptor
can result in damage to the instrument or overheating.
Influences on electro-medical devices
• Use only the supplied power cord/plug.
• Check the electric plug periodically and remove any dirt or dust which
may have accumulated on it.
• Radio waves may affect electro-medical devices.
- Do not use this product near medical devices or inside areas in
which the use of radio waves is restricted.
- Do not use this product within 15cm (6 in.) of persons with a heart
pacemaker or defibrillator implant.
Do not open
• This instrument contains no user-serviceable parts. Do not open the
instrument or attempt to disassemble or modify the internal
components in any way. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified
Yamaha service personnel.
If you notice any abnormality
• When one of the following problems occur, immediately turn off the
power switch and disconnect the electric plug from the outlet. Then
have the device inspected by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
Water warning
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
• Do not expose the instrument to rain, use it near water or in damp or
wet conditions, or place on it any containers (such as vases, bottles or
glasses) containing liquids which might spill into any openings. If any
liquid such as water seeps into the instrument, turn off the power
DMI-7
- There is a sudden loss of sound during use of the instrument.
- If any cracks or breakages exist on the instrument.
1/2
PSR-SX900/SX700 Owner’s Manual
5
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Power supply/AC adaptor
Connections
• Do not connect the instrument to an electrical outlet using a multipleconnector. Doing so can result in lower sound quality, or possibly
cause overheating in the outlet.
• Before connecting the instrument to other electronic components, turn
off the power for all components. Before turning the power on or off for
all components, set all volume levels to minimum.
• When removing the electric plug from the instrument or an outlet,
always hold the plug itself and not the cord. Pulling by the cord can
damage it.
• Be sure to set the volumes of all components at their minimum levels
and gradually raise the volume controls while playing the instrument to
set the desired listening level.
• Remove the electric plug from the outlet when the instrument is not to
be used for extended periods of time, or during electrical storms.
Handling caution
• Do not insert a finger or hand in any gaps on the instrument.
Location
• Do not place the instrument in an unstable position where it might
accidentally fall over.
• Before moving the instrument, remove all connected cables, to prevent
damage to the cables or injury to anyone who might trip over them.
• When setting up the product, make sure that the AC outlet you are
using is easily accessible. If some trouble or malfunction occurs,
immediately turn off the power switch and disconnect the plug from the
outlet. Even when the power switch is turned off, electricity is still
flowing to the product at the minimum level. When you are not using
the product for a long time, make sure to unplug the power cord from
the wall AC outlet.
• Never insert or drop paper, metallic, or other objects into the gaps on
the panel or keyboard. This could cause physical injury to you or
others, damage to the instrument or other property, or operational
failure.
• Do not rest your weight on, or place heavy objects on the instrument,
and do not use excessive force on the buttons, switches or connectors.
• Do not use the instrument/device or headphones for a long period of
time at a high or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing loss or ringing
in the ears, consult a physician.
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
Even when the [
] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
DMI-7
2/2
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.
 Handling
 Saving data
• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile
phone, or other electric devices. Otherwise, the instrument, TV, or radio may
generate noise.
When you use the instrument along with an application on your smart device
such as a smartphone or tablet, we recommend that you set Wi-Fi or Bluetooth to
on after setting “Airplane Mode” to on on that device in order to avoid noise
caused by communication.
• Edited Song/Style/Voice/MIDI setup data, etc. are lost when you turn off the power to
the instrument without saving. This also occurs when the power is turned off by the
Auto Power Off function (page 21). Save the data to the instrument, or to USB flash
drive/an external device such as a computer (page 33). Saving the data to USB flash
drive/an external device is even more secure, since the data in the instrument may be
lost due to some failure, an operation mistake, etc. Before using a USB flash drive,
make sure to refer to page 107.
• Do not expose the instrument to excessive dust or vibrations, or extreme cold or
heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent
the possibility of panel disfiguration, damage to the internal components or
unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° –
104°F.)
• To protect against data loss through USB flash drive damage, we recommend that
you save your important data onto spare USB flash drive or an external device
such as a computer as backup data.
• Do not place vinyl, plastic or rubber objects on the instrument, since this might
discolor the panel or keyboard.
 Maintenance
• When cleaning the instrument, use a soft cloth. Do not use paint thinners,
solvents, alcohol, cleaning fluids, or chemical-impregnated wiping cloths.
6
PSR-SX900/SX700 Owner’s Manual
Main Features
Replacing the hugely successful PSR-S series, the PSR-SX900/SX700 are the new generation in Digital Workstation sound, design and user experience. Whether you’re a professional musician or a hobbyist, these instruments
will inspire and intensify your musical performance and enjoyment.
 Extraordinarily expressive and realistic Voices
Main Features
The PSR-SX900/SX700 has a comprehensive and sonically stunning set of authentic Voices, and gives you the tools to play these
Voices more naturally and with greater expressiveness.
 Accompaniment Styles
The Styles of the PSR-SX900/SX700 provide full instrumental accompaniments making it possible to perform in a wide variety of
music genres, just by playing chords.
 LIVE CONTROL knobs and Assignable buttons—Customize your controllers
The two LIVE CONTROL knobs let you intuitively control your performance in real-time. A wide variety of functions can be
assigned to the knobs, so you can easily add variations to the sound during your performance. The Assignable buttons let you set
your favorite functions and shortcuts for a more personalized operation.
 Chord Looper—Your virtual left hand (PSR-SX900)
Chord Looper enables you to record a chord sequence and play it back, freeing your left hand from playing chords and providing
new opportunities to further enhance your performance.
 Quick and easy set up with Playlist and Registration
Playlist is the new way to quickly setup the instrument, no matter how large your repertoire is. Organize your Registration Memories into convenient Playlists for instant recall during performance.
 Voice and Style expandability with the Yamaha Expansion Manager
With Yamaha Expansion Manager software on your computer, you can continually expand the onboard content of the instrument
by creating and installing your own custom and purchased Packs. Supporting WAV, AIFF, SoundFont and even REX format, for
handling audio slices, the scope of possibilities for new sounds and styles is virtually unlimited.
 Audio Function
Audio files (WAV or MP3 format) can be played back on the instrument. You can also record your performance as audio files
(WAV or MP3 format) to the internal User drive or a USB flash drive directly. The instrument also provides a variety of advanced,
convenient audio playback and processing functions, including Time Stretch, which lets you slow down or speed up an audio file
without changing the pitch, and Pitch Shift, which allows you to change the pitch without affecting the time. The Vocal Cancel
function significantly reduces the volume of vocals in an audio file, allowing you to sing “karaoke” style with just the instrumental
backing. Audio files can also be assigned to Multi Pads and played back during performance, the creative potential is huge.
Compatible formats for the instrument
GM (General MIDI) is one of the most common Voice allocation formats. GM System Level 2 is a standard specification that enhances the original GM format and improves Song data compatibility. It provides for increased polyphony,
greater Voice selection, expanded Voice parameters, and integrated effect processing.
XG is a major enhancement of the GM System Level 1 format, and was developed by Yamaha specifically to provide
more Voices and variations, as well as greater expressive control over Voices and effects, and to ensure compatibility
of data well into the future.
GS was developed by the Roland Corporation. In the same way as Yamaha XG, GS is a major enhancement of the GM
specifically to provide more Voices and Drum kits and their variations, as well as greater expressive control over
Voices and effects.
The Yamaha XF format enhances the SMF (Standard MIDI File) standard with greater functionality and open-ended
expandability for the future. This instrument is capable of displaying lyrics when an XF file containing lyric data is
played.
SFF (Style File Format) is an original Style file format by Yamaha which uses a unique conversion system to provide
high-quality automatic accompaniment based on a wide range of chord types. SFF GE (Guitar Edition) is an enhanced
format of SFF, which features improved note transposition for guitar tracks.
PSR-SX900/SX700 Owner’s Manual
7
Information
 About copyrights
• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use.
• This product incorporates and bundles contents in which Yamaha owns copyrights or with respect to which Yamaha has license to use others’ copyrights. Due to copyright laws
and other relevant laws, you are NOT allowed to distribute media in which these contents are saved or recorded and remain virtually the same or very similar to those in the
product.
* The contents described above include computer applications, Accompaniment Style data, MIDI data, WAVE data, voice recording data, a score, score data, etc.
* You are allowed to distribute media in which your performance or music production using these contents is recorded, and the permission of Yamaha Corporation is not
required in such cases.
 About functions/data bundled with the instrument
• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
• This device is capable of using various types/formats of music data by optimizing them to the proper format music data for use with the device in advance. As a result, this
device may not play them back precisely as their producers or composers originally intended.
Yamaha may from time to time update firmware of the product without notice for improvement in functions and usability. To take full advantage of this instrument, we recommend that you upgrade your instrument to the latest version. The latest firmware can be downloaded from the website below:
https://download.yamaha.com/
Copyright Notice
The followings are the titles, credits and copyright notices for the songs pre-installed in this instrument.
Perfect
Words and Music by Ed Sheeran
Copyright (c) 2017 Sony/ATV Music Publishing (UK) Ltd.
All Rights Administered by Sony/ATV Music Publishing LLC, 424 Church Street, Suite 1200, Nashville, TN 37219
International Copyright Secured All Rights Reserved
Symphony
Words and Music by Jack Patterson, Ina Wroldsen, Steve Mac and Ammar Malik
Copyright (c) 2017 EMI Music Publishing Ltd., Reservoir/Reverb Music Ltd., Rokstone Music, Maru Cha Cha, Lotzah Balls Soup, Where
Da Kasz At? and Prescription Songs LLC
All Rights on behalf of EMI Music Publishing Ltd. Administered by Sony/ATV Music Publishing LLC, 424 Church Street, Suite 1200,
Nashville, TN 37219
All Rights on behalf of Reservoir/Reverb Music Ltd. Administered Worldwide by Reservoir Media Management, Inc.
All Rights on behalf of Rokstone Music in the U.S. and Canada Administered by Universal - PolyGram International Publishing, Inc.
All Rights on behalf of Maru Cha Cha, Lotzah Balls Soup, Where Da Kasz At? and Prescription Songs LLC Administered Worldwide by
Songs Of Kobalt Music Publishing
International Copyright Secured All Rights Reserved
Included Accessories
•
•
•
•
Owner’s Manual (this book) x 1
Online Member Product Registration x 1
Music rest x 1
AC adaptor, power cord x 1
May not be included depending on your area. Check with your Yamaha dealer.
8
PSR-SX900/SX700 Owner’s Manual
About the Manuals
This instrument has the following documents and instructional materials.
Included Documents
Owner’s Manual (this book)
Provides overall explanations of the PSR-SX900/SX700 basic functions.
About the Manuals
Online Materials (Downloadable from the web)
Reference Manual (only in English, French, German, Spanish, Indonesian, and Vietnamese)
Explains advanced features of the instrument, such as creating original Styles, Songs and Multi Pads, and
making the settings of specific parameters.
Data List
Contains various important preset content lists such as Voices, Styles, Effects, as well as MIDI-related
information.
Pre-installed Expansion Contents List
Contains a list of expansion content data pre-installed, which is specially provided for playing music suitable in your locale.
Smart Device Connection Manual for iOS (page 108)
Explains how to connect the instrument to smart devices, such as an iPhone, iPad, etc.
Computer-related Operations (page 110)
Includes instructions on connecting the instrument to a computer, and operations related to transferring
song data.
To obtain these materials, access the Yamaha Downloads website, and then enter the model name to search for the
desired files.
Yamaha Downloads
https://download.yamaha.com/
• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat
different from those on your instrument.
• Even though the example screens and illustrations pertain to the PSR-SX900, the usage is the same for the PSR-SX700.
• The displays are taken from the PSR-SX900, and are in English.
• Windows is a registered trademark of Microsoft® Corporation in the United States and other countries.
• Apple, iTunes, Mac, Macintosh, iPhone, iPad, iPod touch and Lightning are trademarks of Apple Inc., registered in the
U.S. and other countries.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks
by Yamaha Corporation is under license.
• The company names and product names in this manual are the trademarks or registered trademarks of their respective
companies.
PSR-SX900/SX700 Owner’s Manual
9
Using the PSR-SX900/SX700—A Broad Overview
This section provides a helpful overview of the wide range of functions available in this instrument, and places
you can find necessary information on those topics. If you need help in understanding a feature, function or operation—or need to have a general understanding of what the instrument can do and how to effectively use it—look
through this section.
OM
*
: PSR-SX900/SX700 Owner’s Manual (this book). The relevant chapter names are shown after this symbol. For
detailed information on each chapter, see “Contents” (page 12).
: This material can be obtained from the Yamaha Downloads website (page 9).
Using the PSR-SX900/SX700 by itself
Understanding the basic features and workflow of this
instrument
Key Functions and Terms
Panel Controls and Terminals
OM Display Structure
Basic Operations
Workflow Guide
Making basic connections and setting
OM Starting Up
Setting and playing for a single song
• Playing the keyboard with Styles
• Singing with Song playback
Storing and calling up your original setups
OM Operation Guide
Easily managing a large repertoire of Songs
Simply recording a performance with Quick Recording
Using functions in the Menu display (summary)
OM Function List
Connecting devices
(a microphone or guitar, USB flash drive, etc.)
OM Connections
Recording a performance in separate parts with Multi
Recording
Using functions in the Menu display (detailed)
Creating your own original contents
(Styles, Voices by editing presets, Multi Pads)
10
PSR-SX900/SX700 Owner’s Manual
Reference Manual (*)
Using the PSR-SX900/SX700 with a computer
Connecting a computer to the instrument
OM Connections
Transferring files (Songs, Styles, Backup files, etc)
Using the PSR-SX900/SX700—A Broad Overview
Playing back Songs on a computer via the instrument
sounds
Computer-related Operations (*)
Recording your keyboard performance to a computer
Obtaining the Expansion Packs made by Yamaha (also
called “Premium Packs”)
Yamaha MusicSoft website
https://www.yamahamusicsoft.com/soundand-expansion-libraries/
Managing Expansion Pack data
Installing Expansion Pack data to the instrument
Creating your own original Expansion Packs
Yamaha Expansion Manager (*) Owner’s
Manual
Creating your own original contents:
Creating new Voices from scratch (using your own
recorded waveform files)
Installing Expansion Pack data to the instrument
(additional instructions)
Reference Manual (*)
Creating your own original contents:
Creating new Audio Styles (PSR-SX900)
Audio Phraser (*) Owner’s Manual
Using the PSR-SX900/SX700 with other devices
OM Connections
Connecting an iPhone/iPad to the instrument
Smart Device Connection Manual for iOS (*)
Getting iPhone/iPad applications and using them
together with the instrument
Refer to explanations of each application
page on the website below.
https://www.yamaha.com/kbdapps/
Connecting an audio device to the instrument with
Bluetooth connection (PSR-SX900)
OM Connections
Viewing the instrument’s display on an external monitor (PSR-SX900)
OM Connections
PSR-SX900/SX700 Owner’s Manual
11
Contents
PRECAUTIONS........................................................................................................................................ 5
Main Features........................................................................................................................................... 7
Included Accessories................................................................................................................................ 8
About the Manuals.................................................................................................................................... 9
Using the PSR-SX900/SX700—A Broad Overview...10
Key Functions and Terms...14
Panel Controls and Terminals...16
Starting Up...20
Power Supply.......................................................................................................................................... 20
Turning the Power On/Off....................................................................................................................... 20
Making Basic Settings ............................................................................................................................ 21
Changing the Brightness of the Main Display and Button Lamps........................................................... 22
Display Structure...23
Main Display Structure............................................................................................................................ 23
Basic Operations...26
Display Configuration.............................................................................................................................. 26
Closing the Current Display .................................................................................................................... 29
Display-based Controls........................................................................................................................... 30
Calling up the Desired Display Instantly—Direct Access........................................................................ 32
Playing the Demos.................................................................................................................................. 32
File Management .................................................................................................................................... 33
Entering Characters................................................................................................................................ 36
Locking the Panel Settings (Panel Lock) ................................................................................................ 37
Using the Metronome ............................................................................................................................. 37
Workflow Guide—For Performing on the PSR-SX900/SX700...38
Operation
Guide
1
Playing with Styles—Setting Up...40
Setting up Styles..................................................................................................................................... 40
Optimum Panel Settings for the Current Style (One Touch Setting) ...................................................... 43
Setting up Keyboard Parts...................................................................................................................... 44
Selecting a Voice for Each Keyboard Part.............................................................................................. 48
Creating Original Organ Flutes Voices ................................................................................................... 49
Setting up Keyboard Harmony/Arpeggio ................................................................................................ 50
Setting up Multi Pads.............................................................................................................................. 53
Memorizing Original Panel Settings to One Touch Setting..................................................................... 54
Changing the Pitch of the Keyboard ....................................................................................................... 55
Setting up Assignable Controllers........................................................................................................... 56
Operation
Guide
2
Playing with Styles—Operations While Performing...58
Operating Style Playback ....................................................................................................................... 58
Recording and Playing Back a Chord Sequence—Chord Looper (PSR-SX900) ................................... 60
Expressively Controlling Your Performance ........................................................................................... 62
Playing and Controlling Super Articulation Voices.................................................................................. 63
Controlling Multi Pad Playback ............................................................................................................... 64
Operation
Guide
3
Singing with Song Playback—Setting Up...66
Setting Up Song Playback ...................................................................................................................... 66
Applying Effects to the Microphone Sound (Vocal Harmony) (PSR-SX900) .......................................... 70
12
PSR-SX900/SX700 Owner’s Manual
Operation
Guide
4
Singing with Song Playback—Operations While Performing...72
Controlling Song Playback...................................................................................................................... 72
Using Song Position Markers (MIDI Song only) ..................................................................................... 75
Displaying Score, Lyrics, and Text files during Playback ....................................................................... 77
Using the Talk function ........................................................................................................................... 79
Operation
Guide
Adjusting the Parameters of Each Part—Mixer...80
Contents
5
Basic Procedure for the Mixer ................................................................................................................ 80
Turning Each Channel of the Style or MIDI Song On/Off ....................................................................... 82
Changing the Voice for Each Channel of the Style or MIDI Song .......................................................... 83
Operation
Guide
6
Song Recording...84
MIDI Quick Recording............................................................................................................................. 84
Audio Quick Recording ........................................................................................................................... 85
Operation
Guide
7
Storing and Calling up Custom Panel Setups—Registration Memory,
Playlist...86
Saving and Recalling Custom Panel Setups with Registration Memory................................................. 87
Managing a Large Repertoire by Using the Playlist................................................................................ 90
Operation
Guide
8
Customizing for Optimum Performance...94
Customizing the Shortcuts on the Home Display ................................................................................... 94
Setting the Functions or Shortcuts to the ASSIGNABLE Buttons........................................................... 94
Making Global Settings (Utility)............................................................................................................... 95
Adjusting the Sound at the Final Output (Master Compressor, Master EQ)........................................... 96
Adding New Contents—Expansion Packs.............................................................................................. 97
Operation
Guide
9
System Settings...98
Confirming the Firmware Version and Hardware ID ............................................................................... 98
Restoring the Factory-programmed Settings.......................................................................................... 98
Data Backup and Restore....................................................................................................................... 99
Connections—Using Your Instrument with Other Devices...100
Connecting a Microphone or Guitar ([MIC/GUITAR INPUT] jack) ........................................................ 100
Using an External Speaker System for Playback (MAIN OUTPUT jacks, SUB (AUX) OUTPUT jacks
(PSR-SX900))....................................................................................................................................... 102
Listening to Audio Playback by the External Device through the Instrument’s Speaker ...................... 103
Connecting Footswitches/Foot Controllers (FOOT PEDAL jacks)........................................................ 106
Connecting USB Devices ([USB TO DEVICE] terminal) ...................................................................... 107
Connecting to an iPhone/iPad ([USB TO DEVICE], [USB TO HOST], or MIDI terminals) ................... 108
Viewing the Instrument’s Display on an External Monitor (PSR-SX900).............................................. 109
Connecting to a Computer ([USB TO HOST] terminal) ........................................................................ 110
Connecting External MIDI Devices (MIDI terminals) ............................................................................ 110
Function List...111
Appendix...113
Direct Access Chart .............................................................................................................................. 113
Troubleshooting .................................................................................................................................... 115
Specifications........................................................................................................................................ 118
Index ..................................................................................................................................................... 120
PSR-SX900/SX700 Owner’s Manual
13
Key Functions and Terms
This section briefly explains the key functions of this instrument, to help you better understand the overall capabilities.
Styles—Rhythm and Auto Accompaniment—
The PSR-SX900/SX700 features a variety of accompaniment and rhythmic backing patterns (called “Styles”) in a variety
of different musical genres including pop, jazz, and many others. Styles feature sophisticated Auto Accompaniment patterns, letting you produce automatic accompaniment playback simply by playing chords with your left hand. This lets you
automatically recreate the sound of a full band or orchestra—even if you’re playing by yourself.
Voices—Individual sounds of the instrument—
The PSR-SX900/SX700 features a wide variety of exceptionally realistic instrumental Voices, including piano, guitar,
strings, brass, wind instruments and more. The Voices can be played manually on the keyboard, and they are also used by
the Styles, MIDI Songs, and Multi Pads.
Keyboard Parts
There are four keyboard parts for your manual performance: LEFT, RIGHT 1, 2 and 3. Each part has one Voice. You can combine
these parts by using the PART ON/OFF buttons to create luscious instrument textures and convenient performance combinations.
You can change the keyboard range of the Parts by changing the Split Point.
RIGHT 3 part
RIGHT 2 part
RIGHT 1 part
LEFT part
Left-hand (LOWER) section
Right-hand (UPPER) section
Split Point (F#2 by default)
Multi Pads—Adding musical phrases to your performance—
The Multi Pads can be used to play a number of short pre-recorded rhythmic and melodic sequences that can be used to add
impact and variety to your keyboard performances. Multi Pads are grouped in Banks of four phrases each. This instrument
features a variety of Multi Pad Banks in a variety of different musical genres. Moreover, the Audio Link Multi Pad function
allows you to create unique, new pad content with your own audio (WAV) data for playing back during your performance.
Songs—Playing back MIDI/audio files—
For this instrument, the term “Song” refers to MIDI or audio data, such as preset songs, commercially available files, etc.
Not only can you play back a Song and listen to it, but you can also play the keyboard along with Song playback.
Song playback features two modes: Song Player mode and Song List mode.
• Song Player: Plays back two Songs (one MIDI Song and one Audio Song) simultaneously and allows for a smooth transition between the two.
• Song List: Plays back Songs continuously according to a previously created Song List.
Mic/Guitar Connections—Sing/play along with the keyboard performance—
By connecting a microphone to the MIC/GUITAR [INPUT] jack (standard 1/4” phone plug connector), you can enjoy
singing along with your keyboard performance or with Song playback. The instrument outputs your vocals through the
connected speaker system.
Moreover, the PSR-SX900 features an Vocal Harmony/Synth Vocoder function. You can automatically apply various Vocal
Harmony effects to your voice as you sing, or use the Synth Vocoder feature to graft the unique characteristics of your
voice onto synthesizer and other sounds.
Both the PSR-SX900 and PSR-SX700 let you connect an electric guitar, and you can even use powerful DSP effects to process the guitar sound instead, and play that along with the keyboard sounds.
14
PSR-SX900/SX700 Owner’s Manual
Registration Memory—Saving and recalling custom panel setups—
The Registration Memory function allows you to save (or “register”) virtually all panel settings to a Registration Memory
button, and then instantly recall your custom panel settings by simply pressing a single button. The registered settings for
eight Registration Memory buttons are saved as a single Registration Bank (file).
Playlist—Managing large amounts of songs and settings—
The Playlist function makes it easy to manage and call up your songs and the related settings, no matter how numerous.
The Playlist allows you to recall a specific song from more than eight songs by a simple, single step. Up to 2500 songs can
be registered in the Playlist, and you can call up the panel settings corresponding to each song by one tap.
Key Functions and Terms
Recording—Recording your performances—
This instrument allows you to record your performance and save it as a MIDI file in SMF format. The instrument also lets
you record your performances as audio data (WAV) to internal User drive. In addition, MIDI recording also features two
convenient recording methods, Quick Recording and Multi Recording.
PSR-SX900/SX700 Owner’s Manual
15
Panel Controls and Terminals
 Top Panel
y
q
r
t
w
i
e
!6
!5
!8
u
o
!2
!0
!1
!3
!9
!4
!7
q [ ] (Standby/On) switch ................................ Page 20
Turns on the instrument’s power or sets to standby.
w [MASTER VOLUME] dial ............................. Page 20
Adjusts the overall volume.
e [ASSIGN] button, LIVE CONTROL knobs
........................................................................... Page 56
Assigns functions and controls sounds in real time.
r SONG [PLAYER] button .........................Pages 24, 67
Calls up the Song Player display.
t SONG [RECORDING] button ................Pages 24, 84
Calls up the Song Recording display.
y SONG playback control buttons..................... Page 72
Controls MIDI and Audio Song playback.
u STYLE category selection buttons ................. Page 40
Selects a Style category.
i TRANSPOSE buttons...................................... Page 55
Transposes the entire pitch of the instrument in semitone
steps.
16
PSR-SX900/SX700 Owner’s Manual
o TEMPO buttons ............................................... Page 42
Controls the tempo for Style, Song and Metronome
playback.
!0 [RESET/TAP TEMPO] button ............... Pages 42, 59
Allows you to change the tempo by tapping the button
twice at the desired tempo. During Style playback, this
instantly resets (rewinds) the Style section playback.
!1 [MIXER/EQ] button ................................ Pages 24, 80
Calls up the Mixer display which adjusts the parameters
of each part, such as volume, pan, and EQ.
!2 CHORD LOOPER buttons (PSR-SX900)
............................................................................ Page 60
Controls recording and loop playback of the Chord
Looper function.
!3 [DIRECT ACCESS] button................... Pages 32, 113
For instantly calling up the desired display with just a
single additional button press.
@1
@3
Panel Controls and Terminals
@0
@2
@4 @5
@6
@7
@8
@9
!4 STYLE CONTROL buttons ....................Pages 40, 58
For controlling Style playback.
!5 Joystick, [MODULATION HOLD] button.... Page 62
For using pitch bend or modulation functions.
!6 [ROTARY SP/ASSIGNABLE] button ........... Page 57
Controls the rotary speaker effect on/off or the assigned
function.
!7 [PHONES] jack ................................................ Page 19
For connecting a pair of headphones.
!8 Touch LCD and related controls .................... Page 26
!9 ASSIGNABLE buttons.................................... Page 94
For assigning shortcuts to often used functions.
@0 [MIC SETTING/VOCAL HARMONY] button (PSR-SX900)/
[MIC SETTING] button (PSR-SX700)...........Pages 70, 101
Calls up the display from which you can make settings
for the microphone/guitar and (on the PSR-SX900)
Vocal Harmony settings.
#0
#1
@1 [MENU] button......................................... Pages 25, 29
Calls up the Menu display, which allows you to call up
various functions.
@2 [PLAYLIST] button ................................. Pages 25, 90
Calls up the Playlist display.
@3 VOICE category selection buttons.................. Page 48
Selects a Voice category.
@4 [HARMONY/ARPEGGIO] button ................ Page 50
Applies the Harmony or Arpeggio to the right-hand
Voices.
@5 [SUSTAIN] button............................................ Page 63
Applies the Sustain to the right-hand Voices.
@6 PART SELECT buttons................................... Page 48
Selects a Voice for each of the keyboard parts.
@7 PART ON/OFF buttons ................................... Page 44
Turns each of the keyboard parts on or off.
PSR-SX900/SX700 Owner’s Manual
17
@8 REGISTRATION MEMORY buttons........... Page 86
For registering and recalling panel setups.
@9 ONE TOUCH SETTING buttons............Pages 43, 54
Calls up the appropriate panel settings for the Style.
#0 MULTI PAD CONTROL buttons ...........Pages 53, 64
Selects and plays a rhythmic or melodic Multi Pad
phrase.
#1 UPPER OCTAVE buttons ............................... Page 55
Shifts the pitch of the keyboard in octave steps.
Panel Setup (Panel Settings)
By using the controls on the panel, you can make various settings as described here. These settings of the instrument are
together referred to as “panel setup” or “panel settings” in
this manual.
 Rear Panel
q
q DC IN jack........................................................ Page 20
For connecting the power adaptor.
w SUB (AUX) OUTPUT [1 (L/L+R)], [2 (R)] jacks
(PSR-SX900)................................................... Page 102
For connecting external audio devices. These jacks
function as either SUB 1-2 or AUX outputs, depending
on the Line Out settings.
e MAIN OUTPUT [L/L+R], [R] jacks............ Page 102
For connecting external audio devices.
Attaching the Music Rest
Insert the music rest into the slots as shown.
18
PSR-SX900/SX700 Owner’s Manual
w
e
r
t
y
u
r [AUX IN] jack................................................. Page 103
For connecting an external audio device, such as a portable audio player.
t [MIC GUITAR] switch .................................. Page 100
For switching between “MIC” and “Guitar” for proper
use of the [MIC/GUITAR INPUT] jack.
y [MIC/GUITAR INPUT] jack ........................ Page 100
For connecting a microphone or guitar.
o
!0
Panel Controls and Terminals
i
!1
u [GAIN] knob................................................... Page 100
For adjusting the input level of the [MIC/GUITAR
INPUT] jack.
i FOOT PEDAL [1], [2] jacks.......................... Page 106
For connecting footswitches and/or foot controllers.
o MIDI [IN], [OUT] terminals ......................... Page 110
For connecting external MIDI devices.
!0 USB TO DEVICE terminals ......................... Page 107
For connecting USB devices, such as a USB flash drive,
or an optional wireless LAN adaptor, etc.
The PSR-SX900 has two terminals, and the PSR-SX700
has one terminal.
!1 [USB TO HOST] terminal............................. Page 110
For connecting to computer, or an optional wireless
MIDI adaptor.
Using the Headphones
Connect a pair of headphones to the [PHONES] jack.
Standard stereo
phone plug
CAUTION
Do not listen with the headphones at high volume for long periods of time. Doing so may cause hearing loss.
PSR-SX900/SX700 Owner’s Manual
19
Starting Up
Power Supply
Connect the AC adaptor in the order shown in the illustration.
3
2
AC outlet
1
AC adaptor
Power cord
DC IN jack
(page 18)
The shape of the plug and outlet differs depending on your area.
WARNING
Use the specified AC adaptor (page 119) only. Using the wrong AC adaptor can result in damage to the instrument or overheating.
CAUTION
When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn
the power off and disconnect the plug from the outlet.
NOTE
Follow the order shown above in reverse when disconnecting the AC adaptor.
Turning the Power On/Off
1
Turn down the [MASTER VOLUME] dial to “MIN.”
NOTE
Until the Home display appears, no
operations can be carried out, including
power-off and keyboard performance.
2
Press the [
] (Standby/On) switch to turn the power on.
After a brief interval, the Home display (page 26) appears. Adjust the volume as
desired while playing the keyboard.
2
3
20
After you finish using the instrument, turn off the power by
pressing and holding the [ ] (Standby/On) switch for about a
second.
PSR-SX900/SX700 Owner’s Manual
CAUTION
Even when the [ ] (Standby/On)
switch is turned off, electricity is
still flowing to the product at the
minimum level. When you are not
using the product for a long time,
make sure to unplug the power
cord from the wall AC outlet.
NOTICE
When recording or editing, or
while a message is displayed,
the power cannot be turned off
even if you press the [ ]
(Standby/On) switch. If you want
to turn off the power, press the
[ ] (Standby/On) switch only
after recording, editing, or after
the message has disappeared. If
you need to force-quit the instrument, hold down the [ ]
(Standby/On) switch for longer
than three seconds. Note that the
force-quit operation might cause
data loss and damage to the
instrument.
Auto Power Off function
To prevent unnecessary power consumption, this instrument features an Auto Power Off
function that automatically turns the power off if the instrument is not operated for a specified period of time. The amount of time that elapses before the power is automatically
turned off is approximately 30 minutes by default; however, you can change the setting
(page 21).
Lowest key
NOTE
When a USB flash drive containing a
large number of files is connected to
the instrument, the execution of the
Auto Power Off function may be postponed, since the file search index is
automatically updated.
Starting Up
Disabling Auto Power Off (simple method)
Turn the power on while holding down the lowest key on the keyboard. A message
appears briefly and the Auto Power Off function is disabled.
NOTICE
Any data which is not saved via
the Save operation will be lost if
the power automatically turns off.
Make sure to save your data
before this happens.
Making Basic Settings
As necessary, make basic settings for the instrument, such as the language shown on the display.
1
Call up the Utility operation display.
First, press the [MENU] button to call up the Menu display. Then touch [Menu 2]
to move to page 2 on the display (if necessary), and touch [Utility].
2
Touch [System] on the display.
3
Make the necessary settings by touching the display.
Language
Determines the language used in the display for menu names and
messages. Touch this setting to call up the language list, then
select the desired one.
Owner name
Lets you input your name which appears in the opening display
(called up when the power is turned on). Touch this setting to call
up the character entry window, and then input your name
(page 36).
Auto Power Off
Lets you set the amount of time that elapses before the power is
turned off by the Auto Power Off function (page 21). Touch this
to call up the list of settings, and then select the desired one. To
disable Auto Power Off, select “Disabled” here.
For information on the other items in this display, refer to the Reference Manual on
the website (page 9).
PSR-SX900/SX700 Owner’s Manual
21
Changing the Brightness of the Main Display and Button Lamps
Here you can change the brightness of the main display and button lamps.
1
Call up the operation display (Utility) (step 1 on page 21).
2
Call up the “Touch Screen/Display” display.
Touch [Touch Screen/Display] on the display.
3
Change the settings by touching the display.
Screen
Use the slider to adjust the brightness of the main display.
Button Lamps
Touch []/[] to adjust the brightness of the button lamps.
For information on the other items in this display, refer to the Reference Manual on
the website (page 9).
22
PSR-SX900/SX700 Owner’s Manual
Display Structure
This instrument has an LCD touch screen display and button lamps for visually helping you to understand the current status.
Panel buttons and lamps
The LCD indicates the parameters and values
related to the currently selected operation. You
can operate by touching the 'virtual' buttons or
sliders on the display. For details on the display structure, see below.
Many of the panel buttons have colored lamps that
indicate the corresponding function statuses by
lighting on/off, flashing, or changing in color. For
details on the lighting rules and indications, refer to
each description of the functions.
Display Structure
LCD (Main Display; touch screen)
Main Display Structure
When the instrument is turned on, the Home display is called up. By touching the display, you can call up the various functions.
Home display
This is portal of the instrument’s display
structure, which provides at-a-glance information on all current settings. (page 26)
However, as you operate the instrument, you can directly call up displays dedicated to each main function directly by
pressing the corresponding buttons on the front panel. Other functions and various detailed settings for the instrument can
be accessed from the Menu display. Also, depending on the particular function, you can call up the File Selection display to
select desired files.
On the next page, you can see an overview of how to call up each key function display.
PSR-SX900/SX700 Owner’s Manual
23
How to call up the key function displays by the buttons
This map shows how to call up the displays for each key function by the buttons on the panel.
Song Playback display
This is for controlling Song playback (pages 66, 72).
Song Recording
display
For recording your performance (page 84).
Style Selection display
One of the File Selection displays (page 28) for
selecting Styles.
Mixer display
For adjusting the parameters of each part, such as volume, pan, and EQ (page 80).
It also allows you to adjust overall sound controls, by Master Compressor and
Master EQ (page 96).
24
PSR-SX900/SX700 Owner’s Manual
Display Structure
Menu display
By touching each of the icons, you can call up various functions, such as Song Score, Volume Balance
and other detailed settings. (page 29)
Mic Setting display
This is for making settings for the microphone or the guitar
sound (page 101).
Vocal Harmony
display (PSRSX900)
This is for selecting and
editing Vocal Harmony/
Synth Vocoder types
(page 76).
Playlist display
This is for selecting and editing Playlists. (page 90)
Voice Selection display
One of the File Selection displays for selecting Voices for the keyboard parts (page 48).
Multi Pad Selection display
One of the File Selection displays for selecting a Multi Pad Bank (page 53).
Registration Memory Bank Selection display
One of the File Selection displays for selecting Registration Bank (page 88).
PSR-SX900/SX700 Owner’s Manual
25
Basic Operations
Display Configuration
This section covers the most often used displays: Home, File Selection and Menu. The Home display appears when the
power is turned on. The term “File Selection display” refers to all the various displays called up on the instrument from
which you can select files. The Menu display is a portal display for various functions and can be called up by pressing the
[MENU] button.
Home Display
Appears when the power is turned on. This display shows the current basic settings such as the current Voice and Style,
allowing you to see them at a single glance. Because of this, you should normally have the Home display shown when you
perform on the keyboard.
t
q
w
e
r
y
q Voice area
Indicates the current Voices for each of the keyboard parts (Left and Right 1–3) and the on/off status of
the four parts. Touching a Voice name calls up the Voice Selection display for the corresponding part.
w Song area
Indicates information related to Song playback/recording.
The information on Song playback is displayed depending on the Song playback mode (page 67).
Touching the file name calls up the relevant selection display.
When in recording, the recording status is displayed. Touching the recording status calls up the recording display.
e Style area
Indicates information for the current Style, such as the current position of the section playback, the current chord name, and the time signature. Touching a Style name calls up the Style Selection display.
When the [ACMP] button is set to on, the chord specified in the chord section of the keyboard will be
displayed.
r Multi Pad area
Indicates the current Multi Pad Bank. Touching a Multi Pad Bank name calls up the Multi Pad Bank
Selection display.
26
PSR-SX900/SX700 Owner’s Manual
t Other Information area
Indicates the current status, such as the current Registration Memory or microphone-related information. For details, see the next page.
y Shortcut area
Contains the shortcut icons which let you call up various functions with a single touch. Touching a
shortcut icon calls up the display of the corresponding function. You can also register your own custom
shortcut icons as desired here, via the Assignable display (page 94).
Basic Operations
 Other Information area in the Home display
q
w
e
u
r
t
y
q Bar/Beat/Tempo
Displays the current position (bar/beat/tempo) in Style playback or MIDI Song playback.
w Upper Octave/Transpose
Displays the amount that the upper octave value is shifted, and the amount of master transposition in
semitone units (page 55).
e Clock
Once this instrument has accessed the network via the USB Wireless LAN Adaptor, the current time is
shown here.
r Registration Memory Bank
Indicates the currently selected Registration Memory Bank name and Registration Memory number.
Touching a Registration Memory Bank name calls up the Registration Memory Bank Selection display.
t Registration Sequence
Appears when the Registration Sequence is active. For instructions on programming the sequence, refer
to the Reference Manual on the website.
y Vocal Harmony Type (PSR-SX900)
Indicates the current Vocal Harmony Type (page 70). Touching a Vocal Harmony Type name calls up
the Vocal Harmony Type Selection display.
Mic Setting (PSR-SX700)
Indicates the current Mic Setting. Touching a name calls up the Mic setting display.
u MIC/GUITAR Input level indicator
When a microphone or guitar is connected, this indicates the input level. Adjust the level with the
[GAIN] knob so that the indicator lights in green or yellow (but not in red). For details on connecting a
microphone or guitar, refer to page 100.
PSR-SX900/SX700 Owner’s Manual
27
File Selection Display
The File Selection display is for selecting a Voice, Style, Song, Multi Pads and other items. You can call up this display by
touching the name of the Voice, Style or Song on the Home display, or by pressing one of the VOICE buttons or STYLE
buttons, etc. The displays differ depending on which file type is selected. For example, when Voice is selected, the Voice
Selection display is called up.
This section explains the display structures common to all types of the File selection displays.
q
t
w
e
r
q Main Category
Select the Preset, User, or Favorite tab.
Preset
Location where preset data are shown. A wide variety of data such as Voices and Styles are divided into
several sub categories (tabs).
User
Location where recorded or edited data is saved. Data saved to the instrument are shown in “User” (User
drive), while data in the connected USB flash drive are shown in “USB.” In this manual, data in the User
tab are referred to as “User data.”
Favorite
Location where the data which you have registered as Favorites are shown. This tab may not be shown
depending on the data type.
w Sub Category / Drives
• When the Preset tab is selected in the main categories, the sub categories are shown here according to
the data type. For example, various instrument types such as Piano and Organ are shown on the Voice
Selection display.
• When the User tab is selected, the drives available are shown as sub categories.
e Selectable data (files)
The files that can be selected are shown. If two or more pages are available, you can call up another
page by touching the desired page tab at the bottom of this area.
r Folder Path
The current path or folder is shown here according to the folder structure.
t Operation icons
The functions (save, copy, delete, etc.) which can be operated via the File Selection display are shown.
The icons shown here differ depending on which File Selection display is selected. For detailed instructions, refer to “File Management” (page 33), or the instructions for each function’s File Selection display.
28
PSR-SX900/SX700 Owner’s Manual
Menu Display
This is the portal display for using various functions and can be called up by pressing the [MENU] button.
Basic Operations
Various convenient functions are shown via icons. Touching each of them calls up the corresponding function. This list consists of two pages, which you can select by touching
[Menu 1] or [Menu 2], or pressing the [MENU] button several times.
For brief information on each function, refer to the “Function List” (page 111).
NOTE
You can also change pages by flicking
horizontally.
Instruction conventions for the Menu display
Throughout this manual, instructions with multiple steps are given in convenient shorthand, with arrows indicating the
proper sequence.
Example: [MENU]  [Utility]  [System]  [Language]
The example above describes a four step operation:
1) Press the [MENU] button to call up the Menu display.
2) From the Menu display, Touch [Utility].
3) Touch [System].
4) Touch [Language].
Closing the Current Display
To close the current display, press the [EXIT] button or touch
at the upper right of the display (or window) or [Close] at
the lower right of pop-up displays. When a message (information or confirmation dialog) appears, touching the appropriate
item such as “Yes” or “No” closes the message.
If you want to instantly return to the Home display, press the [DIRECT ACCESS] and [EXIT] buttons simultaneously.
PSR-SX900/SX700 Owner’s Manual
29
Display-based Controls
The display of this instrument is a special touch screen that allows you to select or change the desired parameter by simply
touching the corresponding setting on the display. You can also decrease/increase the value in small steps by rotating the
Data dial or pressing the [DEC]/[INC] button.
Using the display (touch screen)
NOTICE
Do not use any sharp or hard tools to operate the touch screen. Doing so may damage the display.
NOTE
Keep in mind that operation by simultaneously touching two or more points on the display is not possible.
 Touch
To select an item, lightly touch the corresponding indication on the display.
NOTE
If you find the system sounds (produced when touching the display) distracting, you can turn them on/off from
[MENU]  [Utility]  [Touch Screen/
Display]  Touch Screen [Sound]
 Slide
Hold down the display slider, then slide your finger vertically or horizontally to change the
parameter value.
NOTE
In the case of a vertical slider, the slide
operation is only effective for the slider
when it is selected. To select a slider,
touch it once. The selected state is indicated by a surrounding orange frame.
 Rotate
Touch and hold the display knob, and rotate your finger around the knob to change the
parameter value.
NOTE
The rotate operation is only effective for
the knob when it is selected. To select a
knob, touch it once. The selected state
is indicated by a surrounding orange
frame.
 Touch and hold
This instruction means to touch the object in the display and hold it for a while.
When setting values by using the []/[] buttons, a slider or a knob, you can restore the default value by touching and
holding the value on the display.
30
PSR-SX900/SX700 Owner’s Manual
Using the Data dial, [ENTER] button, and [DEC]/[INC] buttons
Depending on the display, the Data dial and the buttons can be used in the following two ways.
 Adjusting the parameter values
After selecting the desired parameter by touching it, use the Data dial or the [DEC]/[INC] buttons to adjust the value. This
is useful if you have difficulty adjusting by touching on the display, or want finer control over the adjustment.
Data dial
Basic Operations
 Selecting an item from a list
When a list such as File Selection displays or pop-up windows for setting parameters, use the Data dial and the [DEC]/
[INC] buttons to select an item.
Rotate the dial or press the
[DEC]/[INC] buttons to actually
select the item. The selected
item is highlighted.
PSR-SX900/SX700 Owner’s Manual
31
Calling up the Desired Display Instantly—Direct Access
With the convenient Direct Access function, you can instantly call up the desired display—with just a single additional button press. Refer to the “Direct Access Chart” on page 113 for a list of the displays that can be called up with the Direct
Access function.
1
Press the [DIRECT ACCESS] button.
A message appears in the display prompting you to press the appropriate button.
2
Press the button (or move the knob, joystick or connected pedal)
corresponding to the desired setting display to instantly call up
that display.
For example, pressing one of the REGISTRATION MEMORY [1]–[8] buttons
calls up the Regist Bank Info display (page 89).
Playing the Demos
The Demos provide dynamic demonstrations of the high-quality sounds.
1
Call up the Demo display via [MENU]  [Demo].
2
Touch the display to show and play the desired Demo.
3
32
Press the [EXIT] button to exit from the Demo display.
PSR-SX900/SX700 Owner’s Manual
NOTE
To return to the higher level menu,
touch [Menu] on the display.
File Management
Data you have created such as recorded Songs and edited Voices can be saved as files to the
instrument (referred to as “User drive”) or a USB flash drive. If you’ve saved a lot of files,
you may have trouble finding the desired file quickly. To make operation easier, you can
organize your files in folders, rename the files, delete unnecessary files, etc. These operations are done in the File Selection display.
NOTE
Before using a USB flash drive, be sure
to read “Connecting USB Devices” on
page 107.
Basic Operations
Restrictions for Preset Songs
Preset Songs are copy protected to prevent illegal copying or accidental erasure. These can only be copied or saved to
the User drive, and cannot be moved, and deleted.
Saving a file
You can save your original data (such as Songs you’ve recorded and Voices you’ve edited) as a file to the User drive or the
USB drive in the File Selection display (page 28).
1
In the relevant File Selection display (*), touch
call up the File Edit pop-up window.
*
(File Edit) to
For example, the display shown below (Voice Selection) is called up via the
PART SELECT [RIGHT 1] button.
NOTE
To cancel the file operation, press the
[EXIT] button.
1
2
3
2
Touch [Save] to call up the display for selecting the saving destination.
Select the location to which you want to save the file.
To show the next higher level folder, touch
(Up).
4
4
5
Touch [Save here] to call up the Character Entry window.
NOTE
To cancel this operation, touch [Cancel].
Enter the file name (page 36).
Even if you skip this step, you can rename the file at any time (page 34) after saving.
NEXT PAGE
PSR-SX900/SX700 Owner’s Manual
33
6
Touch [OK] in the Character Entry window to actually save the
file.
The saved file will be automatically located at the appropriate position among the
files in alphabetical order.
Creating a new folder
Folders can be created, named and organized as desired, making it easier to find and select
your original data.
1
In the File Selection display, touch the User tab (page 28) then
select the location to which you want to create a new folder.
To show the next higher level folder, touch
(Up).
2
Touch
3
Touch [New Folder] to call up the Character Entry window.
4
Input the name of the new folder (page 36).
(File Edit) to call up the File Edit pop-up window.
NOTE
The maximum number of files/folders
which can be stored in a folder is 2500.
NOTE
A new folder cannot be created in the
Preset tab or the “Expansion” folder
(page 97) in the User tab.
Renaming a file/folder
You can rename files/folders.
1
2
3
4
5
6
Call up the File Selection display, on which the desired file/folder
is shown.
Touch
NOTE
Files in the Preset tab or the “Expansion” folder (page 97) in the User tab
cannot be renamed.
(File Edit) to call up the File Edit pop-up window.
Touch [Rename] in the File Management menu, to call up the
display for selecting the desired file/folder.
Select the desired file or folder by touching it.
Touch [Rename] at the top of the display to call up the Character
Entry window.
NOTE
Only one file or folder can be renamed
at a time.
Input the name of the selected file or folder (page 36).
Copying or moving files
You can copy or cut a file and paste it to another location (folder). You can also copy a
folder (without move it) by using the same procedure.
1
2
3
34
Call up the appropriate File Selection display, on which the
desired files/folders are shown.
Touch
(File Edit) to call up the File Edit pop-up window.
Touch [Copy] or [Move] in the File Management menu, to call up
the display for selecting the desired files/folders.
PSR-SX900/SX700 Owner’s Manual
NOTE
• Files in the Preset tabs cannot be
copied/moved.
• Files in the “Expansion” folder
(page 97) in the User tab cannot be
copied/moved.
4
Select the desired files/folders by touching each item.
One or more files/folders can be selected (highlighted). To cancel the selection,
touch the same item again.
Touch [Select All] to select all items indicated on the current display including the
other pages. To cancel the selection, touch [All Off].
5
7
Select the desired destination (path) to paste the files/folders.
Touch [Copy here] or [Move here] to paste the files/folders
you’ve selected in step 4.
NOTE
Basic Operations
6
Touch [Copy] or [Move] at the top of the display, to call up the
display for selecting the destination.
To cancel this operation, touch [Cancel]
before going to step 7.
The pasted file/folder appears on the display at the appropriate position among the
files in alphabetical order.
Deleting files/folders
You can delete files/folders.
1
2
3
4
NOTE
Call up the appropriate File Selection display, on which the
desired files/folders are shown.
Touch
Files in the Preset tabs or the “Expansion” folder (page 97) in the User tab
cannot be deleted.
(File Edit) to call up the File Edit pop-up window.
Touch [Delete] in the File Management menu, to call up the display for selecting the desired files/folders.
Select the desired files/folders by touching each item.
One or more files/folders can be selected (highlighted). To cancel the selection,
touch the same item again.
Touch [Select All] to select all items indicated on the current display including the
other pages. To cancel the selection, touch [All Off].
5
Touch [Delete] at the top of the display.
A confirmation message appears. To cancel this operation, touch [No] before going
to step 6.
6
Touch [Yes] to actually delete the files/folders you’ve selected in
step 3.
Registering files to the Favorite tab
You can call up your favorite or often used Style or Voice files quickly by registering them to the Favorite tab. For details,
refer to the Reference Manual on the website (page 9).
Searching for files
You can search for desired files by name, on the display called up via touching
(File Search). In the case of Registration Memory Bank files, you can also search for them by specifying other detailed properties. For details, refer to the Reference Manual on the website (page 9).
PSR-SX900/SX700 Owner’s Manual
35
Entering Characters
This section covers how to enter characters for naming your files/folders, inputting keywords on searching file, etc. Entering characters is done in the display shown below.
2, 3
1
1
Touch the character type.
Touching [Symbol] (or [abc]) switches between entering symbols or Roman letters
(and numbers).
To switch between entering capital letters or small letters, touch
(Shift).
2
3
Touch []/[], rotate the Data dial or the press [DEC]/[INC] buttons to move the cursor to the desired location.
Input the desired character one by one.
To delete a single character, touch [Delete]; to delete all characters at once, touch
and hold [Delete]. To enter a space, touch the space key indicated in the illustration
above.
To input letters with auxiliary symbols:
You can input letters with auxiliary symbols, such as an umlaut, by touching
and holding a letter to call up a list. For example, touch and hold “E” to enter
“Ë” from the list.
NOTE
• Depending on the display for character entry you are working in, some
types of characters cannot be
entered.
• A file name can contain up to 46
characters and a folder name can
contain up to 50 characters.
• The following characters (half size)
cannot be used: \ / : * ? " < > I
NOTE
To cancel this operation, touch [Cancel]
before going on to step 4.
To select custom icons for files (shown at left of file name):
You can select custom icons for the file. Touch [Icon] to call up the pop-up
window, then select the desired icon.
4
36
Touch [OK] to finalize the characters (name, keywords, etc.) you
have input.
PSR-SX900/SX700 Owner’s Manual
Locking the Panel Settings (Panel Lock)
When the panel settings are locked, nothing happens if you press any panel buttons. For example, when you take a break
during your performance and leave the instrument unattended, this feature protects the panel settings from being accessed
by others.
1
Call up the Panel Lock display via [MENU]  [Panel Lock].
The numeric keypad for PIN code entry is called up.
Basic Operations
2
Input a four-number PIN code by touching the numeric keypad,
then touch [OK] to enter it.
The panel settings are locked. The main display is also in a lock mode during the
panel lock.
3
To unlock the instrument, touch the display, then input the same
PIN code you entered in step 2.
NOTE
If you have forgotten the PIN code, simply turn the power off and back on again
to unlock the instrument.
Using the Metronome
The metronome provides a click sound, giving you an accurate tempo guide when you practice, or letting you hear and
check how a specific tempo sounds. When recording without Style playback, turning the metronome on makes your
recording sessions much more efficient.
1
Call up the Metronome display via [MENU]  [Metronome].
2
2
Touch the icon to turn the metronome On/Off.
NOTE
For information on the other items on the display, refer to “Metronome Settings” of
the Reference Manual on the website.
The Metronome can also be turned on/
off by touching the Metronome On/Off
button on each recording display.
(page 84)
PSR-SX900/SX700 Owner’s Manual
37
Workflow Guide—For Performing on the
PSR-SX900/SX700
 Creating panel settings manually and performing a single song
Playing the keyboard with Styles (Auto Accompaniment)
Optimum panel settings for the current Style (One
Touch Setting) ... p. 43
Setting up the
Style
Calling up the most appropriate panel settings (Keyboard Parts,
Harmony/Arpeggio, or Multi Pads) for the selected Style.
or
... p. 40
Setting up the Voices ... p. 44
(Setting up keyboard parts)
Setting up Harmony/
Arpeggio ... p. 50
or
Singing with Song playback
Making Song playback settings ... p. 66
 Storing the song’s panel settings for easy recall
Storing the song’s panel settings to Registration Memory ... p. 87
For details about Registration Memory and Registration Banks, refer to page 86.
 Calling up the stored panel settings for your performance
Selecting the desired Registration Bank file
Calling up the Registration Memories 1–10 for the Bank file. (p. 88)
Calling up the desired song’s panel settings from the Playlist in a single step
Selecting the desired Playlist Record for calling up the corresponding linked Registration Memory. (p. 92)
 Recording your keyboard performance
Recording setup: Calling up a Registration Memory from the Playlist,
etc.
38
PSR-SX900/SX700 Owner’s Manual
Setting up
Vocal Harmony
Assigning
functions to
controllers ... p. 56
Setting up
Vocal Harmony
(PSR-SX900)
... p. 70
Workflow Guide—For Performing on the PSR-SX900/SX700
Assigning
functions to
controllers ... p. 56
Playing with Styles
Operations during performance: p. 58
Setting up Multi
Pads ... p. 53
(PSR-SX900)
... p. 70
Singing with Song
playback
Operations during performance: p. 72
Registering the Registration Memory to
a Playlist ... p. 90
Editing the Playlist for your live
performance set list ... p. 90
Creating a Playlist Record as a shortcut to the Registration Memory.
Creating a new Playlist for your live performance by
selecting Songs from a preset Playlist.
Selecting the desired Registration Memory
Calling up the desired panel settings by pressing the Registration Memory 1–10. (p. 88)
Further recording setup
MIDI Quick Recording ... p. 84
Audio Quick Recording ... p. 85
Playing with Styles
or singing with
Song playback
Recording your
performance
Recording your playing
and/or singing.
PSR-SX900/SX700 Owner’s Manual
39
1
Operation Guide
Playing with Styles—Setting Up
This section gives you basic steps on how to enhance your keyboard performance with Styles (Rhythm and Auto
Accompaniment). Go through the various instructions below to completely set up your performance of a single
song: Style, Keyboard Part (Voice), Multi Pad, and various types of controllers.
The settings made in this section can be collectively stored in the Registration Memory as one song setting
(page 86).
Setting up Styles
Selecting the desired Style and turning Auto Accompaniment (ACMP) on
1
Press one of the STYLE category selection buttons to call up the
Style Selection display.
NOTE
You can also call up the Style Selection
display via the Home display (page 26).
• Expansion Styles
Styles additionally installed (page 97). By
default, Expansion Styles specially provided for playing music suitable in your
area are installed.
• User Styles
Styles created with the Style Creator function (refer to the Reference Manual on the
website), or Styles copied to the User drive
(page 34).
Preset Styles
2
Touch the desired Style.
NOTE
For example, touch the category [Dance], and then [Dubstep].
3
Press the STYLE CONTROL [ACMP] button to turn on the Auto
Accompaniment.
When the button is turned on, both the rhythm part and auto accompaniment can be
played back during Style playback.
Split Point (F#2 as default)
Chord section
At the same time, the specific left-hand section of the keyboard can be used as the
Chord section, and chords played in this section are automatically detected and
used as a basis for fully automatic accompaniment with the selected Style.
40
PSR-SX900/SX700 Owner’s Manual
For basic operations of the Style Selection display, refer to “File Selection Display” (page 28).
NOTE
The Split Point can be changed as
desired (page 45).
4
If necessary, try out the selected Style.
NOTE
Press the STYLE CONTROL [ ] (SYNC START) button, then play chords with
your left hand.
To stop Style Playback, press the STYLE CONTROL [
] (START/STOP) button.
For more details on operating Style
playback, refer to page 58.
Style Characteristics
The particular type of Style is indicated the upper left of the Style name in the Style Selection display. The defining
characteristics of these Styles and their performance advantages are described below.
1
Playing with Styles—Setting Up
• Session: These Styles provide even greater realism and authentic backing by mixing in original chord types and
changes, as well as special riffs with chord changes, with the Main sections. These have been programmed to add
“spice” and a professional touch to your performances of certain songs and in certain genres. Keep in mind, however, that the Styles may not necessarily be appropriate—or even harmonically correct—for all songs and for all
chord playing. In some cases for example, playing a simple major triad for a country song may result in a “jazzy”
seventh chord, or playing an on-bass chord may result in inappropriate or unexpected accompaniment.
• Free Play: These Styles are characterized by rubato performance. You can perform freely with remarkably expressive accompaniment, without being constrained by a strict tempo.
• DJ: These contain their own special chord progressions, so you can add chord changes to your performance simply
by changing the root key. The Multi Pad (page 53) data in the “DJ Phrase” category are specially created for these
Styles. You can call up the suitable Multi Pads by using the One Touch Setting function (page 43).
NOTE
You cannot specify the chord type, such as major and minor, when using the DJ Styles.
For the Preset Style List, refer to the Data List on the website.
A Style generally consists of eight parts (channels): rhythm, bass, etc. You can add variations and change the feeling of a
Style by selectively turning channels on/off or by changing the Voices (page 82).
Style File Compatibility
This instrument uses the SFF GE file format (page 7) and can play back existing SFF files; however, they will be saved
in the SFF GE format when the file is saved (or loaded) in this instrument. Keep in mind that the saved file can only be
played back on instruments that are compatible with the SFF GE format.
PSR-SX900/SX700 Owner’s Manual
41
Adjusting the tempo
The TEMPO [-] and [+] buttons let you change the playback tempo of the Metronome,
Style and MIDI Song. The tempo of the Style and MIDI Song can also be adjusted via the
[RESET/TAP TEMPO] button.
NOTE
If you want to adjust the tempo of an
Audio Song, use the Time Stretch function on page 74.
 TEMPO [-]/[+] buttons
Press the TEMPO [-] or [+] button to call up the Tempo pop-up display. Use the TEMPO
[-]/[+] buttons to decrease or increase the tempo over a range of 5–500 beats per minute.
Holding down either button changes the value continuously. Pressing both TEMPO [-] and
[+] buttons calls up the default tempo of the last selected Style or Song.
 [RESET/TAP TEMPO] button
When Style and MIDI Song are stopped, tapping the [RESET/TAP TEMPO] button (four
times for a 4/4 time signature) starts playback of the rhythm part of the Style at the tempo
you tapped.
During playback of a MIDI Song, you can change the tempo by tapping the [RESET/TAP
TEMPO] button twice at the desired tempo.
During playback of a Style, you can rewind to the top of the section (“reset” the playback
position, for stutter repeat effects) by tapping the [RESET/TAP TEMPO] button. This is
called as “Style Section Reset.”
NOTE
You can set the behavior to change the
tempo instead of “reset” of the section,
even when tapping the button during
playback of a Style. The setting is made
on the display called up via [MENU] 
[Metronome]  [Tap Tempo]. For
details, refer to the Reference Manual
on the website.
Changing the Chord Fingering type
By changing the Chord Fingering type, you can automatically produce appropriate accompaniment even if you don’t press
all of the notes which comprise a chord. Chord fingering type can be changed via the Split Point/Fingering window:
[MENU]  [Split & Fingering].
The following types can be selected, for example.
 Single Finger
This method lets you easily play chords in the accompaniment range of the keyboard using only one, two or three fingers.
Major chord
Minor chord
Seventh chord
Minor seventh chord
Press the root key only.
Simultaneously press the root
key and a black key to its left.
Simultaneously press the
root key and a white key to
its left.
Simultaneously press the
root key and both a white and
black key to its left.
 Fingered
This lets you finger your own chords on the chord section of the keyboard, while the instrument supplies appropriately
orchestrated rhythm, bass, and chord accompaniment in the selected Style. The Fingered type recognizes the various chord
types which are listed on the Data List on the website (page 9), and can be looked up using the Chord Tutor function called
up via [MENU]  [Chord Tutor].
 AI Full Keyboard
This lets you play just about anything, anywhere on the keyboard using both hands—like
conventional playing of a piano—and still have appropriate accompaniment. You don’t
have to worry about specific ways to play/indicate the chords. (Depending on the song
arrangement, AI Full Keyboard may not always produce appropriate accompaniment.)
NOTE
When the chord detection area is set to
“Upper” (page 47), only “Fingered*”is
available.
For other types, refer to the Reference Manual on the website (page 9).
NOTE
In the case of a specific fingering type (Fingered, Fingered on base, AI Fingered), you can create a state in which no chord is input by entering a special chord named “Cancel.”
This is called as “Chord Cancel.” For more information on entering chords including “Cancel,” refer to the “Chord Types Recognized in the Fingered Mode” in the Reference
Manual on the website.
42
PSR-SX900/SX700 Owner’s Manual
Optimum Panel Settings for the Current Style (One Touch Setting)
One Touch Setting is a powerful and convenient feature that automatically calls up the
most appropriate panel settings (Voices, effects, etc.) for the currently selected Style, with
the touch of a single button. If you’ve already decided which Style you wish to use, you
can have One Touch Setting automatically select the appropriate Voice for you.
1
Select the Desired Style (steps 1–2 on page 40).
2
Press one of the ONE TOUCH SETTING [1]–[4] buttons.
NOTE
For information on panel settings that
are called up by One Touch Setting,
refer to the OTS section of “Parameter
Chart” in the Data List on the website
(page 9).
1
Playing with Styles—Setting Up
Not only does this instantly call up all the settings (Voices, effects, etc.) that match
and are most commonly used with the current Style, it also automatically turns on
ACMP and SYNC START, so that you can immediately start playing the Style.
Confirming the One Touch Setting Contents
In the Style Selection display, touch
(Menu) then [Style Information] to
call up the Information window that shows what Voices are assigned to the
ONE TOUCH SETTING [1]–[4] buttons for the current Style. You can call up
the desired settings also by touching one of the One Touch Settings numbers 1–
4 directly on the Information window.
3
As soon as you play a chord with your left hand, the selected
Style starts.
Each Style has four One Touch Setting setups. Press any other of the ONE TOUCH
SETTING [1]–[4] buttons to try out other setups.
NOTE
You can automatically have the One
Touch Settings change when you select
a Main section (A–D) of the selected
Style. For details, refer to “OTS LINK”
(page 59).
PSR-SX900/SX700 Owner’s Manual
43
Setting up Keyboard Parts
There are four keyboard parts for your manual performance: LEFT, RIGHT 1, RIGHT 2 and RIGHT 3, and each part has
one Voice. You can combine these parts by using the PART ON/OFF buttons to create luscious instrument textures and
convenient performance combinations.
For calling up the Voice Selection
display of each part
For turning on/off the keyboard parts
RIGHT 3 part
RIGHT 2 part
RIGHT 1 part
LEFT part
Left-hand (LOWER) section
Right-hand (UPPER) section
Split Point (F#2 by default)
Creating combinations of keyboard parts (Layer, Split)
 To play one single Voice over the entire keyboard:
Turn on the RIGHT 1, 2 or 3 part. Make sure the LEFT part is turned off.
 To play two or three different Voices simultaneously (Layer):
Turn on two or more parts from RIGHT 1, 2 and 3.
 To play different Voices in the right- and left-hand sections of the keyboard (Split):
Turn on the LEFT part and at least one of the RIGHT 1–3 parts. The F#2 and lower keys are used for the LEFT part while
the upper keys (excluding F#2) are used for the RIGHT 1, 2 and 3 parts. The key which divides the keyboard into the lefthand and right-hand sections is referred to as the “Split Point.”
Turning each keyboard part on/off from the display
You can also turn parts on/off via the Home display, or the Voice Part Setup display. For details, see “Home Display”
(page 26), or “Voice Part Setup Display” (Reference Manual on the web site).
44
PSR-SX900/SX700 Owner’s Manual
Holding the LEFT part Voice (Left Hold)
By turning on the PART ON/OFF [LEFT HOLD] button when the LEFT part is ON, the
LEFT part Voice is held even when the keys are released.
Non-decaying Voices such as strings are held continuously, while decay-type Voices such
as piano decay more slowly (as if the sustain pedal has been pressed). This function is
convenient when used along with Style playback since the sound of the chords matching
Style playback are maintained.
To stop the LEFT part Voice which is sounding, stop Style or Song playback, or turn the
[LEFT HOLD] button off.
1
Playing with Styles—Setting Up
Setting the Split Point
The key which divides the keyboard into two areas is referred to as “Split Point.” There are three types of Split Point: Split
Point (Style), Split Point (Left), and Split Point (Right 3). You can set them individually (as shown).
Split Point
(Style)
Chord section
Split Point
(Left)
LEFT part section
Split Point
(Right 3)
RIGHT 1, 2
parts section
RIGHT 3
part
section
Right-hand (UPPER) section
Left-hand (LOWER) section
• Split Point (Style):.............Divides the left-hand (LOWER) section into the Chord section and the LEFT part section.
• Split Point (Left): ..............Divides the keyboard into the left-hand (LOWER) section and the right-hand (UPPER) section.
• Split Point (Right 3):.........Divides the right-hand (UPPER) section into the RIGHT 1, 2 parts section and the RIGHT 3
part section.
1
Call up the Split Point/Fingering window.
[MENU]  [Split & Fingering]
2
Set the Split Point.
q
w
w
NEXT PAGE
PSR-SX900/SX700 Owner’s Manual
45
q
Split Point
(Style + Left)
Sets Split Point (Style) and Split Point (Left) to the same note. In this case, the Chord Section
and the LEFT part section occupy the same area.
Specify the Split Point directly from the keyboard by simultaneously holding [Style + Left] on
the display and pressing the desired key on the keyboard.
Split Point
(Style + Left)
Chord + LEFT
part section
Right-hand section
(Left-hand section)
w
Split Point
(Style, Left, Right 3)
Sets each Split Point individually.
Specify the Split Point directly from the keyboard by simultaneously holding the corresponding item on the display and pressing the desired key on the keyboard.
You can also specify each Split Point by note name, touching the []/[] controls. Split Point (Style) is indicated
by “Style,” Split Point (Left) is indicated by “Left,” and Split Point (Right 3) is indicated by “Right 3.”
NOTE
Once you have touched []/[], the Split Point type you are controlling is focused (corresponding indicator is colored). In this condition, you can change the value
of the focused Split Point type by rotating the Data dial.
NOTE
Split Point (Left) cannot be set lower than Split Point (Style), and Split Point (Right 3) cannot be set lower than Split Point (Left).
46
PSR-SX900/SX700 Owner’s Manual
Specifying chords with your right hand for Style playback
By changing the Chord Detection area from the left-hand section to the right-hand section, you can play a bass line with
your left hand while using your right hand to play chords for controlling Style playback.
1
Call up the Split Point/Fingering window.
[MENU]  [Split & Fingering]
2
Make the necessary settings by touching the display.
1
Playing with Styles—Setting Up
Chord Detection
Area
Select “Upper.” The Chord section is set to the right of the left Split Point. Fingering type is
set to “Fingered*” automatically.
Split Point
(Style)
LEFT Voice section
(Left-hand section)
Split Point
(Left)
Split Point
(Right 3)
RIGHT 1, 2
parts section
RIGHT 3
part
section
Right-hand section
Chord section
NOTE
• “Fingered*” is basically same as “Fingered,” except that “1+5,” “1+8” and Chord Cancel are not available.
• For information about when the “Chord Detection Area” is set to “Lower,” refer to “Setting the Split Point” (page 45).
Manual Bass
When this is set to “On”, the bass part of the current Style is muted and the Voice of the muted
bass part is assigned to the left part.
NOTE
• Manual Bass is set to “On” automatically by the default settings when you select “Upper” in the Chord Detection Area
above.
• This parameter is available only when the “Chord Detection Area” is set to “Upper.”
PSR-SX900/SX700 Owner’s Manual
47
Selecting a Voice for Each Keyboard Part
1
Press the PART SELECT button corresponding to the desired
part.
The Voice Selection display (for the desired part) appears.
2
Touch the desired Voice.
NOTE
You can also call up the Voice Selection
display via the Home display (page 26)
or the Voice Part Setup display (Reference Manual on the web site).
NOTE
You can also select the sub category of the Voice, pressing one of the VOICE category selection buttons.
For basic operations of the Voice Selection display, refer to “File Selection Display” (page 28).
• Expansion Voices
Voices additionally installed (page 97). By
default, Expansion Voices specially provided
for playing music suitable in your area are
installed.
Preset Voices
• User Voices
Voices created with the Voice Set function
(refer to the Reference Manual on the website), or Voices copied to the User drive
(page 34).
To hear the characteristics of the Voices:
Touch
(Demo) to start demo playback of the selected Voice. Touch
(Demo) again to stop playback.
3
If necessary, try out the selected Voice.
Make sure that the desired keyboard part is turned on, and play the keyboard.
Voice Characteristics
The Voice type and its defining characteristics are indicated above the Voice name. There are various Voice characteristics; however, only the following ones are covered
here. For detailed explanations, refer to the Reference
Manual on the website (page 9).
• S.Art (Super Articulation) Voices (page 63)
Lets you create subtle, very realistic expressive nuances, simply by how you play or by pressing a foot pedal connected to the FOOT PEDAL [2] jack.
• Organ Flutes Voices (page 49)
Lets you recreate all of the classic organ sounds by adjusting the flute footage levels and the percussive sounds,
just like on conventional organs.
• Drums/SFX Voices
These let you play various drums and percussion instruments or SFX (sound effects) sounds on the keyboard, collected together in what are called Drum/SFX kits. For details, see the “Drum/SFX Kit List” of the Data List on the
website.
48
PSR-SX900/SX700 Owner’s Manual
Creating Original Organ Flutes Voices
This instrument uses advanced digital technology to recreate the legendary sound of vintage organs. Just as on a traditional electronic organ, you can create your own sound by
increasing and decreasing the levels of the flute footages. The created Voice can be saved
for future recall.
1
NOTE
The term “footage” is a reference to the
sound generation of traditional pipe
organs, in which the sound is produced
by pipes of different lengths (in feet).
On the Voice Selection display, select the desired Organ Flutes
Voice.
1
Touch the [Organ] in the sub categories, then select the desired Organ Flutes Voice.
3
Return to the Home display, then touch
(Organ Flutes)
located at the lower right of the Voice name to call up the Organ
Flutes Voice Edit display.
Slide the Footage levers to adjust the footage settings.
NOTE
The footage settings determine the basic sound of the Organ Flutes.
q
w
e
r
Playing with Styles—Setting Up
2
• The available parameters differ
depending on the Organ type.
• You can also make Effects and EQ
settings. For details, refer to the Reference Manual on the website
(page 9).
t
3
You can also change other settings here, such as Rotary Speaker and Vibrato.
4
q
Volume
Determines the volume of the entire Organ Flutes sound.
w
Rotary Speaker
Alternately switches between the slow and fast rotary speaker speeds. This parameter is available only when an effect which contains “Rotary” or “Rot” in its name is applied.
e
Vibrato
Turns the vibrato on or off, and allows you to adjust the vibrato depth and vibrato speed.
r
Response
Adjusts the response speed of both the Attack and Release portions of the sound.
t
Attack
Switches between two different Attack modes: First and Each, and determines the length of
the Attack sound.
Touch
(Save) and save the created Organ Voice.
For instructions on saving, refer to “File Management” (page 33).
NOTICE
The settings will be lost if you
select another Voice or turn the
power to the instrument off without executing the Save operation.
PSR-SX900/SX700 Owner’s Manual
49
Setting up Keyboard Harmony/Arpeggio
You can apply the Keyboard Harmony or Arpeggio features to enhance or change the
sound of the Right-hand parts (RIGHT 1–3). Keyboard Harmony applies performance
effects such as harmony (duet, trio, etc.), echo, tremolo and trill to the notes played in the
Right-hand section. The Arpeggio function lets you play arpeggios (broken chords) by
simply pressing the notes of the chord. For example, you could play the notes C, E and G to
trigger interesting and rhythmically dynamic phrases. This feature can be used for music
production as well as live performance.
NOTE
When you select another Voice for the
RIGHT 1 part, the Keyboard Harmony/
Arpeggio type is automatically set to the
type which is memorized as the Voice
Set. For details on the Voice Set function, refer to the Reference Manual on
the website.
Using Keyboard Harmony
1
Call up the operation display.
[MENU]  [Kbd Harmony/Arp]
2
2
Set the Keyboard Harmony/Arpeggio function to “On.”
When this is set to “On,” Keyboard Harmony is applied to your keyboard performance automatically.
3
Touch to select the desired category, “Harmony” or “Echo.”
4
Touch the desired Harmony or Echo type.
NOTE
You can also set the function to “On” by
turning the [HARMONY/ARPEGGIO]
button on.
Touching
(detailed settings) calls up the detailed settings popup window. For
more information, refer to the Reference Manual on the web site.
5
Play the keyboard.
The effect selected in step 4 is applied to the right-hand melody.
To turn off the effect, turn the [HARMONY/ARPEGGIO] button off.
 Keyboard Harmony category types (Harmony/Echo)
 Harmony Category
Standard Duet—Strum
These types apply the harmony effect to notes played in the right-hand section of the keyboard according to the chord specified in the left-hand section of the keyboard. (Note that
the “1+5” and “Octave” settings are not affected by the chord.)
• When the [ACMP] button is on and the LEFT part is off:
Split Point
(Style)
Chord section for Style playback and Harmony effect
50
PSR-SX900/SX700 Owner’s Manual
NOTE
For details on the Split Point, refer to
page 45.
• When the [ACMP] button is off and the LEFT part is on:
Split Point
(Left)
RIGHT 1–3 parts
LEFT part and chord section for Harmony effect
• When both the [ACMP] button and the LEFT part are on:
Split Point
(Style)
1
Split Point
(Left)
Playing with Styles—Setting Up
LEFT part
RIGHT 1–3 parts
Chord section for Style playback and Harmony effect
Multi Assign
The Multi Assign effect automatically assigns the notes of chords you play on the righthand section of the keyboard to separate parts (Voices). For example, if you play a threenote chord, the first note you press is played by the RIGHT 1 Voice, the second by the
RIGHT 2 Voice, and the third by the RIGHT 3 Voice. The Multi Assign effect is not
affected by the [ACMP] and LEFT part on/off status.
 Echo Category (Echo, Tremolo, Trill)
The Echo, Tremolo or Trill effect is applied to the note played in the right-hand section of
the keyboard in time with the currently set tempo, regardless of the [ACMP] and the LEFT
part on/off status. Keep in mind that Trill works only when you hold down two notes on the
keyboard simultaneously (or the last two notes, if more than two notes are held), and it
plays those notes alternately.
Using Arpeggio
1
Call up the operation display.
[MENU]  [Kbd Harmony/Arp]
2
2
Set the Keyboard Harmony/Arpeggio function to “On.”
NOTE
When this is set to “On,” Keyboard Harmony is applied to your keyboard performance automatically.
3
Touch to select a category other than “Harmony” or “Echo.”
4
Touch the desired Arpeggio type.
You can also set the function to “On” by
turning the [HARMONY/ARPEGGIO]
button on.
Touching
(detailed settings) calls up the detailed settings popup window. For
more information, refer to reference manual on the web site.
NEXT PAGE
PSR-SX900/SX700 Owner’s Manual
51
5
Play a note or notes to trigger the Arpeggio.
The arpeggiated phrase differs depending on the notes played.
To turn off the effect, turn the [HARMONY/ARPEGGIO] button off.
52
PSR-SX900/SX700 Owner’s Manual
NOTE
• By using the Arpeggio Quantize
function, Arpeggio playback can be
synchronized with Song/Style playback, allowing any slight imperfections in the timing to be corrected.
This can be set in the display:
[MENU]  [Voice Setting] 
[Arpeggio].
• Arpeggio playback can be continued
even after the note has been released,
by assigning the Arpeggio Hold
function to the footswitch. For
instructions, refer to page 57.
Setting up Multi Pads
Selecting Multi Pads
1
Press the MULTI PAD CONTROL [SELECT] button to call up the
Multi Pad Bank Selection display.
NOTE
You can also call up the Multi Pad
Selection display via the Home display
(page 26).
1
3
Touch the desired Multi Pad Bank.
Playing with Styles—Setting Up
2
NOTE
For basic operations of the Multi Pad
Selection display, refer to “File Selection Display” (page 28).
If desired, try out the selected Multi Pad(s).
Simply press the MULTI PAD CONTROL [1]–[4] buttons to start playback of the
corresponding phrase. To stop playback, press the [STOP] button.
For more information on Multi Pad playback control, refer to “Controlling Multi
Pad Playback” (page 64).
Creating and Editing Multi Pads
You can create your original Multi Pads in one of three ways:
• Recording new phrases
• Editing existing Multi Pad phrases
• Linking with audio files (Audio Link Multi Pad)
Also, you can make your original Multi Pad Bank by managing each Multi Pad.
For details, refer to the Reference Manual on the web site (page 9).
PSR-SX900/SX700 Owner’s Manual
53
Memorizing Original Panel Settings to One Touch Setting
You can memorize your original panel settings (mainly Style, Voices, and Multi Pads) to a
One Touch Setting (OTS). The newly created One Touch Setting will be saved in the User
drive or a USB flash drive as a Style, and you can call up the One Touch Setting as a part of
the Style.
1
2
3
NOTE
For information on which panel settings
are memorized to One Touch Setting,
refer to “Parameter Chart” in the Data
List on the website (page 9).
Select the desired Style to memorize your One Touch Setting.
Make the desired panel settings, such as those for Voices and
Effects.
Press the [MEMORY] button in the REGISTRATION MEMORY
section.
A message appears. However, you do not need to make any settings here, since the
On/Off settings in this display do not affect the One Touch Setting function.
4
Press the desired ONE TOUCH SETTING [1]–[4] button to which
you wish to memorize your panel settings.
NOTE
For OTS buttons to which your panel
settings have not been memorized, the
OTS settings of the original Style will
be maintained.
A message appears prompting you to save the panel settings at this time. To go on
and memorize various panel settings to other buttons, touch [No], and then repeat
steps 2–4 as necessary, finally saving all your new settings in Step 5 below.
5
Touch [Yes] to call up the Style Selection display for saving your
data, and then save the current settings as a User Style.
For instructions on saving, refer to “File Management” (page 33).
54
PSR-SX900/SX700 Owner’s Manual
NOTICE
The memorized One Touch Setting will be lost if you change the
Style or turn the power off without
carrying out the Save operation.
Changing the Pitch of the Keyboard
Transposing the pitch in semitones (TRANSPOSE [-]/[+]buttons)
The TRANSPOSE [-]/[+] buttons transpose the overall pitch of the instrument (the keyboard sound, Style playback, MIDI Song playback, and so on) in semitone steps (from -12
to 12). To instantly reset the transpose value to 0, press the [-] and [+] buttons simultaneously.
Master
Transposes the pitch of the entire sound, with the exception of the Audio
Song and input sound from the [MIC/GUITAR INPUT] or the [AUX IN]
jacks.
Keyboard
Transposing the keyboard pitch including the chord root for triggering
Style Playback.
Song
Transposes the pitch of the MIDI Song.
1
Playing with Styles—Setting Up
You can independently select the part to be transposed as desired. Touch the Transpose
pop-up several times until the desired part appears, and then use the TRANSPOSE [-]/[+]
buttons to transpose it.
NOTE
• If you want to transpose the pitch of
the Audio Song, use the Pitch Shift
parameter on page 74.
• The Transpose functions do not affect
the Drum Kit or SFX Kit Voices.
NOTE
Transpose can be done on the display
also via [MENU]  [Transpose]. For
details, refer to the Reference Manual
on the website.
Fine Tuning the Pitch
By default, the pitch of the entire instrument is set to 440.0 Hz according to equal temperament. This setup can be changed from the display called up via [MENU]  [Master Tune]. For details, refer to the Reference Manual on the website.
Transposing the pitch in octaves (UPPER OCTAVE [-]/[+] buttons)
The UPPER OCTAVE [-]/[+] buttons allow you to shift the pitch of the Right 1–3 parts up or down by one octave. To
instantly reset the octave value to 0, press the [-] and [+] buttons simultaneously.
PSR-SX900/SX700 Owner’s Manual
55
Setting up Assignable Controllers
You can assign parameters and functions to the LIVE CONTROL knobs, the [ROTARY SP/ASSIGNABLE] button, or
optional footswitches for quick operations and expressive control during your keyboard performance. The setup of assignable controllers is stored/recalled from the registration memory so you can change them all together at once.
Selecting the Assign Types of the LIVE CONTROL knobs
Each setup of assigned parameters for knobs is called “Knob Assign Type.” There are three Knob Assign Types (1–3) and
they can be switched in sequence by pressing the LIVE CONTROL [ASSIGN] button. The selected Assign Types for
knobs will be reset when the power is turned off; however, these can be conveniently saved to Registration Memory
(page 86).
1: Assign Type 1
2: Assign Type 2
3: Assign Type 3
Editing the Assign Type of the knobs
Knob Assign Types 1–3 can be edited in the Edit display which is called up as follows: [MENU]  [Live Control]. For
details of editable items, refer to the Reference Manual on the website.
56
PSR-SX900/SX700 Owner’s Manual
Assigning functions to the assignable buttons
Various functions can be assigned to the ASSIGNABLE [A]–[F] buttons and the [ROTARY SP/ASSIGNABLE] button.
1
To call up the Edit display, touch [MENU]  [Assignable].
1
2
Playing with Styles—Setting Up
2
Double-tap (touch twice) the desired item on the “Assignable
Buttons” area (shown above).
The function selection pop-up window appears.
3
Touch the desired function.
NOTE
There are some differences between the
ASSIGNABLE [A]–[F] buttons and the
[ROTARY SP/ASSIGNABLE] button on
which functions can be assigned. For
details on assignable functions, refer to
the Reference Manual on the website.
Assigning functions to footswitches/foot controllers
You can assign various functions to optional footswitches/foot controllers.
1
To call up the Edit display, touch [MENU]  [Assignable].
2
2
Double-tap (touch twice) the desired item in the “Foot Pedals”
area (shown above).
The function selection pop-up window appears.
3
Touch the desired function.
NOTE
• For details on assignable parameters and functions, refer to the Reference Manual on the website.
• For connecting footswitches/foot
controllers, refer to “Connecting
Footswitches/Foot Controllers”
(page 106).
PSR-SX900/SX700 Owner’s Manual
57
2
Operation Guide
Playing with Styles—Operations While
Performing
If you’ve made all desired settings for a single song (in the previous sections), now you’re ready to play the keyboard. This section mainly explains the various Style-related operations you’ll use during your keyboard performance: Style playback, applying expressive effects, and Multi Pad playback.
Operating Style Playback
Starting and stopping Style playback
 [START/STOP] button
Starts playback of the rhythm part of the current Style. To stop playback, press the button
again.
Playing back both rhythm and auto accompaniment (ACMP)
If the [ACMP] button is turned on, both the rhythm part and auto accompaniment can be
played back when playing chords in the chord section during Style playback.
 [SYNC START] button
This puts the Style playback in “standby.” The Style starts playing back when you press any
note on the keyboard (when [ACMP] is off) or you play a chord with your left hand (when
[ACMP] is on). While a Style is playing back, pressing this button stops the Style and puts
playback in standby.
 [SYNC STOP] button
You can start and stop the Style any time you want by simply playing or releasing the keys
in the chord section of the keyboard. Make sure that the [ACMP] button is on, press the
[SYNC STOP] button, and then play the keyboard.
NOTE
When the Fingering type (page 42) is
set to “Full Keyboard” or “AI Full Keyboard,” Sync Stop cannot be turned on.
 INTRO [I]–[III] buttons
The instrument features three different Intro sections that let you add an introduction before
starting the Style playback. After pressing one of the INTRO [I]–[III] buttons, start playback of the Style. When the Intro finishes playing, the Style playback automatically shifts
to the Main section.
 ENDING/rit. [I]–[III] buttons
The instrument features three different Ending sections that let you add an ending before
stopping Style playback. When you press one of the ENDING [I]–[III] buttons while Style
is playing back, the Style will automatically stop after the ending is played. You can have
the ending gradually slow down (ritardando) by pressing the same ENDING button once
again, while the ending is playing.
58
PSR-SX900/SX700 Owner’s Manual
Fading In/Out
The Fade In/Out function produces smooth fade-ins and fade-outs when starting/stopping the playback of a Style or
Song. You can assign this function to the [ROTARY SP/ASSIGNABLE] button, footswitches, or the ASSIGNABLE
[A]–[F] buttons.
NOTE
For information on assigning functions to each controller, refer to “Setting up Assignable Controllers” (page 56) and “Setting the Functions or Shortcuts to the ASSIGNABLE Buttons” (page 94).
• To start playback with a fade in:
When playback is stopped, press the button to which this function has been assigned. Then press the [START/
STOP] button for Style (or the [
] (PLAY/PAUSE) button for MIDI Song).
• To stop playback with a fade out:
During playback, press the button to which this function has been assigned.
2
Changing pattern variations (Sections) during Style playback
 MAIN VARIATION [A]–[D] buttons
Press one of the MAIN VARIATION [A]–[D] buttons to select the desired Main section (the
button lights in red). Each is an accompaniment pattern of a few measures or more and it
plays indefinitely. Pressing the selected MAIN VARIATION button again plays an appropriate fill-in pattern to spice up the rhythm and break the repetition. After the fill-in finishes
playing, it leads smoothly into the Main section.
Playing with Styles—Operations While Performing
Each Style features four different Main sections, four Fill-in sections and a Break section.
By using these sections effectively, you can easily make your performance sound more
dynamic and professional. The section can be freely changed while the Style is playing
back.
Press the selected
Main section (lit in
red) again.
The fill-in of the
selected Main section plays (flashes in
red).
AUTO FILL IN function
When the [AUTO FILL IN] button is turned on, pressing any of the MAIN VARIATION
[A]–[D] buttons as you play automatically plays a fill-in section for a smooth, dynamic
transition into the next (or same) section.
Style Section Reset
During playback of a Style, you can rewind to the top of the section (“reset” the playback position, for stutter repeat
effects) by pressing the [RESET/TAP TEMPO] button (page 42).
Automatically changing One Touch Settings with the Main sections (OTS
LINK)
The convenient OTS (One Touch Setting) Link function lets you automatically have One
Touch Settings change when you select a different Main section (A–D). The Main sections
A, B, C and D correspond to One Touch Settings 1, 2, 3 and 4 respectively. To use the OTS
Link function, turn the [OTS LINK] button on.
NOTE
You can change the timing in which the One Touch Settings change with the MAIN VARIATION [A]–[D] changes. To do this, call up the display via [MENU]  [Style Setting]  [Setting], then set the OTS Link Timing parameter. For details, refer to the Reference Manual on the website (page 9)
 [BREAK] button
This lets you add dynamic breaks in the rhythm of the accompaniment. Press the [BREAK]
button during Style playback. When the one-measure Break pattern finishes playing, Style
playback automatically shifts to the Main section.
PSR-SX900/SX700 Owner’s Manual
59
About the lamp status of the section buttons (INTRO/MAIN VARIATION/BREAK/ENDING)
• Orange: The section is currently selected.
• Orange (flashing): The section will be played next, following the currently selected section.
* The MAIN VARIATION [A]–[D] button lamps also flash in orange when the fill-in is playing.
• Blue: The section contains data but is not currently selected.
• Off: The section contains no data and cannot be played.
Recording and Playing Back a Chord Sequence—Chord Looper (PSRSX900)
While playing back a Style, you usually specify chords with your left hand. However, with the convenient Chord Looper
function, you can record a sequence of the chords and play it back in a loop. For example, if you record a “C  F  G 
C” chord progression, Style playback will continue automatically with the chords “C  F  G  C  C  F  G  C 
...” Since the chords play back in a loop, you don’t need to repeat the chord pattern manually anymore—letting you focus
on your performance and other operations.
Loop playback a chord sequence while playing back the Style
You can record desired chord sequence instantly and loop it.
1
While playing back a Style, press the CHORD LOOPER [REC/
STOP] button.
NOTE
When the [REC/STOP] is turned on, the
[ACMP] button is turned on automatically.
The [REC/STOP] button flashes to indicate the Chord Looper function is standby
to record.
On the next measure of the Style, the [REC/STOP] button is turned on and the
recording starts.
2
Enter the chords on the keyboard, according to the playback
tempo of the Style.
Chord sequence is recorded until you stop recording in step 3.
3
60
Press the CHORD LOOPER [ON/OFF] button to stop recording
and start loop playback of the chord sequence.
PSR-SX900/SX700 Owner’s Manual
NOTE
While the chord sequence is played
back, the [ACMP] button flashes, chord
input from the keyboard is disabled,
and the whole keyboard is only used for
performance.
Recording stops, and the [ON/OFF] button flashes in orange and loop playback
standby is entered.
On the next measure of the Style, the [ON/OFF] button lights in orange, and the
chord sequence recorded on step 2 will be played back in loop.
4
Press the CHORD LOOPER [ON/OFF] button to stop loop playback.
NOTE
• The [ON/OFF] button lights blue to
indicate the chord sequence has
been recorded and loop playback
stops.
• Pressing the [ON/OFF] button starts
again loop playback of the chord
sequence recorded on steps 1–3.
2
The playback of the chord sequence is stopped, and the Style will return to normal
playback.
Playing with Styles—Operations While Performing
Advanced features of the Chord Looper function
You can start recording the chord sequence when Style playback is stopped, using SYNC START.
Also, you can save recorded chord sequences from the display called up via [MENU]  [Chord Looper].
• Up to eight chord sequences can be memorized.
• You can save each chord sequence as a file individually for future recall.
For details, refer to the Reference Manual on the website.
PSR-SX900/SX700 Owner’s Manual
61
Expressively Controlling Your Performance
Using the Joystick
By moving the joystick in a horizontal (X) or vertical (Y) direction, you can bend the notes up or down, or apply modulation effects. Move the joystick to control the sound while playing the keyboard.
+Y
-X
+X
-Y
 X: Pitch Bend
Bends notes up (by moving the joystick to the right) or down (by moving the joystick to the
left) while playing the keyboard. This is applied to all keyboard parts (RIGHT 1–3 and
LEFT).
NOTE
• The maximum pitch bend range can
be changed on the display called up
via [MENU]  [Keyboard/Joystick]
 [Joystick].
• The Pitch Bend effect may not be
applied to the LEFT part during Style
playback, depending on the Style
setting.
 Y: Modulation
The Modulation function applies a vibrato effect to notes played on the keyboard. By
default, this is applied to the keyboard parts RIGHT 1–3. You can set whether the modulation effects produced by the joystick will be applied or not to each keyboard part independently: [MENU]  [Keyboard/Joystick]  [Joystick]  Modulation (+), Modulation (-).
Holding the Modulation value (MODULATION HOLD)
The Joystick is self-centering when released. However, you can hold the current Modulation value by pressing the [MODULATION HOLD] button.
• If the [MODULATION HOLD] button is turned on while the Joystick is moved, the
Modulation value (Y-axis value) is fixed and held even after the Joystick is released.
• If the [MODULATION HOLD] button is turned off, the Modulation value returns to the
default value for the Voice of each Part. (The position of the Joystick at that time is
ignored.)
NOTE
When the Voice of one of the keyboard parts is set, the [MODULATION HOLD] button will be turned off automatically, and
then the Modulation (+) and Modulation (-) parameters will be reset.
Applying sustain to the RIGHT 1–3 Voices
The [SUSTAIN] button turns the Sustain function on and off. When on, all notes played on
the keyboard with the right-hand parts (RIGHT 1, 2, 3) have a longer sustain.
62
PSR-SX900/SX700 Owner’s Manual
NOTE
The Modulation effects may not be
applied to the LEFT part during Style
playback, depending on the Style setting.
+Y
-X
+X
-Y
Playing and Controlling Super Articulation Voices
The word “articulation” in music usually refers to the transition or continuity between
notes. This is often reflected in specific performance techniques, such as staccato, legato
and slur.
The Super Articulation Voices (S.Art Voices) enable you to create subtle, very realistic
expressive nuances, simply by how you play. The Voice type (S.Art) is indicated above the
name of Super Articulation Voices, on the Voice Selection display.
NOTE
The applied articulation effect differs
depending on the selected Voice. For
details, refer to the Data List on the
website.
Automatic articulation effects of Super Articulation Voices
 S.Art Voices
2
The S.Art Voices provide many benefits with great playability and expressive real-time control.
Playing with Styles—Operations While Performing
Example: Saxophone Voice
If you play a C note and then an adjacent D in a very legato way, you will hear the note
change seamlessly, as though a saxophone player played it in a single breath.
Example: Concert Guitar Voice
If you play a C note and then the E just above in a very legato but firm way, the pitch
slides up from C to E.
NOTE
You can also add articulation sounds manually by using the functions “Articulation 1–2” when the Voice has the corresponding sounds. These functions can be assigned to the ASSIGNABLE buttons, the [ROTARY SP/ASSIGNABLE] button, or the
foot pedals. (pages 57, 94)
PSR-SX900/SX700 Owner’s Manual
63
Controlling Multi Pad Playback
Playing the Multi Pads
1
Press any of the MULTI PAD CONTROL [1]–[4] buttons to play a
Multi Pad phrase.
The corresponding phrase for the button starts playing back in its entirety at the
currently set tempo. You can play up to four Multi Pads at the same time.
2
Press the [STOP] button to stop playback of the Multi Pad(s).
If you want to stop a specific pad, simultaneously hold down the [STOP] button
and press the pad(s) you wish to stop.
NOTE
• There are two types of Multi Pad
data. Some types will play back once
and stop when they reach to the end.
Others will be played back repeatedly
(loop).
• Pressing the pad during its playback
will stop playing and begin playing
from the top again.
NOTE
• While the Style or MIDI Song is playing back, pressing the Multi Pad button starts playback at the top of the
next measure. When the Style or
MIDI Song is stopped, pressing the
Multi Pad button starts playback
immediately.
• While the Style or MIDI Song is playing back, pressing the STYLE CONTROL [START/STOP] or MIDI [
]
(PLAY/PAUSE) button also stops
playback of the Multi Pad(s). While
both the Style and MIDI Song is
playing back, pressing the MIDI
[
] (PLAY/PAUSE) button stops
playback of the Song, Style and Multi
Pad(s). This behavior can be
changed with settings on the Song
Setting and Style Setting displays.
For details, refer to the Reference
Manual on the website.
About the lamp status of the MULTI PAD CONTROL [1]–[4] buttons
• Blue: Indicates that the corresponding pad contains data (phrase).
• Orange: Indicates that the corresponding pad is playing back.
• Orange (flashing): Indicates that the corresponding pad is in standby (Synchro Start; refer to page 65).
• Off: Indicates the corresponding pad contains no data and cannot be played.
Using Chord Match
When the [ACMP] or LEFT part is on, Multi Pad phrases automatically change the pitch to match the chord you play
in the chord section.
Play the chord in the chord section before/after pressing any of the Multi Pads.
Chord Section
NOTE
Some Multi Pads are not affected by Chord Match.
64
PSR-SX900/SX700 Owner’s Manual
Using the Multi Pad Synchro Start Function
You can also start Multi Pad playback by playing the keyboard or by starting Style playback.
1
While holding the MULTI PAD CONTROL [SELECT] button, press
the desired button or buttons from [1]–[4].
The corresponding buttons flash in red, indicating standby status.
NOTE
To cancel the standby status of the
selected Pad, carry out the same operation, or simply press the [STOP] button
to cancel the status of all Pads.
2
Start playback of the Multi Pad.
Playing with Styles—Operations While Performing
2
NOTE
• When [ACMP] is off, press any note, or play back a Style.
• When [ACMP] is on, play a chord in the chord section, or play back a Style.
When two or more Multi Pads are in
standby status, pressing any one of
them starts simultaneous playback of
all of them.
If you enable standby for a Multi Pad during Style or Song playback, pressing any
note (when [ACMP] is off) or playing a chord in the chord section (when [ACMP]
is on) will start Multi Pad playback at the top of the next measure.
PSR-SX900/SX700 Owner’s Manual
65
3
Operation Guide
Singing with Song Playback—Setting Up
This section explains how to set up for your singing performance with Songs, using Song selection and Vocal Harmony settings.
As is the case in Chapter 1, the settings made in this section can be collectively stored in the Registration Memory
as one song setting (page 86).
Setting Up Song Playback
Songs—MIDI Song and Audio Song
For this instrument, “Song” refers to MIDI or audio data which include preset songs, commercially available music files, etc. Not only can you playback a song and listen to it, but
you can also play the keyboard or sing along with Song playback.
There are two kinds of Songs that can be recorded and played back on this instrument:
MIDI Songs and Audio Songs.
 MIDI Song
A MIDI Song is comprised of your keyboard performance information and is not a recording of the actual sound itself. The performance information refers to which keys are
played, at what timing, and at what strength—just as in a musical score. Based on the
recorded performance information, the tone generator (of the instrument, etc.) outputs the
corresponding sound. Since MIDI Song data contains the information such as keyboard
part and Voice, you can play more effectively by viewing the score, turning the particular
part on or off, or changing Voices.
 Audio Song
An Audio Song is a recording of the performed sound itself. This data is recorded in the
same way as that used in recording cassette tapes, or with voice recorders, etc. Audio
Songs can be played back on portable music players and many other devices, making it
easy for you to let others hear what you have played.
If you want to play back a Song in a USB flash drive, connect the USB flash drive containing Song data to the [USB TO DEVICE] terminal beforehand.
66
PSR-SX900/SX700 Owner’s Manual
NOTE
Before using a USB flash drive, be sure
to read “Connecting USB Devices” on
page 107.
Song File Compatibility
You can play back the following types of Songs.
• Preset Songs (MIDI Songs)
• Your own recorded Songs (for instructions on recording, see page 84)
• Commercially available Songs: MIDI files in SMF (Standard MIDI File) format, Audio files in WAV or MP3 format.
WAV.......... 44.1 kHz sample rate, 16 bit resolution, stereo
MP3 .......... 44.1/48.0 kHz sample rate, 64–320 kbps bit rate or VBR, mono/stereo
NOTE
• For a general overview of MIDI and how you can effectively use it, refer to “MIDI Basics” on the website (page 9).
• For information on compatible MIDI formats, refer to page 7.
Switching Song playback modes
3
1
Singing with Song Playback—Setting Up
This instrument features two modes of Song playback: Song Player mode and Song List mode. Song Player mode plays
back a MIDI Song and a Audio Song simultaneously. Song List mode plays back Songs continuously along with a previously created Song List.
Press the [PLAYER] button to call up the Song Playback display.
The Song Player function or Song List is displayed, depending on which you have
selected last time.
2
Touch the display or press the [PLAYER] button to switch the
Song playback mode.
Press the [PLAYER] button, or
tap [List] on the display.
Press the [PLAYER] button, or
tap [Player] on the display.
PSR-SX900/SX700 Owner’s Manual
67
Selecting Songs (Song Player mode)
1
Press the [PLAYER] button to call up the Song Playback display.
Make sure that Song Player mode is selected.
2
2
Touch the Song name in the MIDI or Audio area.
The Song Selection display for the corresponding Song type (MIDI or Audio)
appears.
3
Select the desired Song.
Viewing Song information
When an Audio Song is selected on the Song Selection display, touching
then [Audio Information] calls up the information window.
For detailed playback operations, refer to page 72.
68
PSR-SX900/SX700 Owner’s Manual
NOTE
(Menu)
• For basic operations of the Song
Selection display, refer to “File
Selection Display” (page 28).
• You can call up the display of Song
playback related settings, via
(Menu)  [Song Setting].
• You can adjust the volume balance
between MIDI Song playback and
Audio Song playback, using the LIVE
control knob assigned “MIDI/Audio
Song Balance” function. For details
in assigning the LIVE CONTROL
knob function, refer to the Reference
Manual on the website.
Selecting Songs (Song List mode)
1
Press the [SONG] button to call up the Song Playback display.
Make sure that Song List mode is selected.
2
2
Prepare a Song List
 When creating a new Song List
3
Singing with Song Playback—Setting Up
Touching
(New) on the display allows you to create a new Song List.
For details on how to edit the Song List, refer to the Reference Manual on the website.
 When selecting an existing Song List
2-1 Call up the Song List File Selection display by touching the Song List name.
2-2 Touch the desired Song List file.
3
Touch the desired Song from the selected Song List.
The selected Song is highlighted.
For detailed playback controls, refer to page 72.
For information on controlling continuous playback of the Songs on the list, refer to the
Reference Manual on the website.
PSR-SX900/SX700 Owner’s Manual
69
Applying Effects to the Microphone Sound (Vocal Harmony) (PSR-SX900)
You can automatically apply various Vocal Harmony effects to your voice as you sing, or
you can use Synth Vocoder to graft the unique characteristics of your voice onto synthesizer and other sounds.
NOTE
Make sure to connect a microphone
before using Vocal Harmony and Synth
Vocoder. For instructions on connecting a microphone and making necessary settings, refer to page 100.
Using Vocal Harmony
1
Call up the Vocal Harmony display via the [MENU] button 
[VocalHarmony].
NOTE
The display can also be called up by
pressing the [MIC SETTING/VOCAL
HARMONY] button several times.
3 Vocal Harmony type name
Mode
2
5
(When the Mode is set to “Vocoder” or “Vocoder Mono”)
2
Make sure that Harmony is set to “On.”
If necessary, touch the display to turn the Harmony “On.”
3
4
Touch the Vocal Harmony type name to call up the Vocal Harmony Type Selection display.
Touch the desired Vocal Harmony Type to select it.
The Vocal Harmony features three different Modes which can be selected automatically by selecting a Vocal Harmony Type.
Vocal Harmony Modes
Chordal
The harmony notes are determined by the chords you play in the
chord section (with [ACMP ON/OFF] turned on), the left hand
section (with [ACMP ON/OFF] turned off and the Left part
turned on) or the chord data of a Song.
Vocoder
The microphone sound is output via the notes you play on the
keyboard or the Song playback notes.
Vocoder-mono
Basically the same as Vocoder; however, in this mode, only single-note melodies or lines can be played back (with last-note priority).
Icons shown in the Vocal Harmony Type Selection display indicate the following
usage cases.
(Blue)
(Brown)
(Green)
(Gray)
70
Vocal Harmony Type of Chordal Mode
Vocal Harmony Type of Vocoder Mode
Vocal Harmony Type having unusual effects, such as a robotic
voice.
Vocal Harmony Type without any effect.
PSR-SX900/SX700 Owner’s Manual
NOTE
The Harmony can also be turned on/off
by pressing one of the ASSIGNABLE
buttons that is assigned the “VH Harmony On/Off” function. For details,
refer to the Reference Manual on the
website.
5
Follow the steps below, depending on which Type (and mode)
you selected.
 If you selected the Chordal Type:
5-1 Make sure that the [ACMP] button is turned on.
5-2 Play back a Style while playing chords, or play back a Song which contains
chords.
Vocal harmonies based on the chords are applied to your singing.
 If you selected the Vocoder or Vocoder-Mono Type:
5-1 As necessary, change the “Keyboard” setting to “Off,” “Upper,” or “Lower.”
When “Upper” or “Lower” is selected, playing the right-hand or left-hand
section of the keyboard will control the Vocoder effect. When “Off” is
selected, playing the keyboard will not control the Vocoder effect.
5-2 Play melodies on the keyboard or play back a Song, and sing into the microphone.
You’ll notice that you don’t actually have to sing pitched notes. The Vocoder
effect takes the words you say and applies them to the pitch of the instrument
sounds.
NOTE
For Vocoder Types, the effect is applied
to a maximum of three notes of the
chord you play; for Vocoder-Mono, the
effect is only applied to single notes
(last note applied).
3
These are special effects that graft the characteristics of your voice onto synthesizer and other sounds, for unusual
machine‐like or robotic effects, as well as unique choir sounds, which you can control with your own singing and playing.
1
2
3
4
Execute steps 1–3 in “Using Vocal Harmony” on page 70.
From the Vocal Harmony Type Selection display, select the
Synth Vocoder category from the sub categories.
Touch the desired Synth Vocoder Type to select it.
Try holding down a note on the keyboard and speak or sing into
the microphone.
Also, try changing notes as you say/sing different words, hitting a separate note for
each word.
NOTE
You can change the Keyboard setting
(Off/Upper/Lower), determining which
part of the keyboard (or Song) controls
the effect. For details, refer to the Reference manual on the website.
PSR-SX900/SX700 Owner’s Manual
71
Singing with Song Playback—Setting Up
Using Synth Vocoder
4
Operation Guide
Singing with Song Playback—Operations
While Performing
This section explains operations you can do during your singing performance with Songs: Song playback, displaying score and lyrics, and Audio Song, and switching microphone-related functions.
Controlling Song Playback
Song playback can be controlled by pressing buttons on the panel or from the Song Playback display which is called up by
pressing the SONG [PLAYER] button. The control displays for MIDI Song and Audio Song (if used) appear, allowing you
to control the currently selected Songs on the screen.
Song Playback display
NOTE
• For details on MIDI Song/Audio
Song, switching between Song playback modes, and Song selection,
refer to page 66.
• In the Song List mode, only basic
playback operations are possible. On
the other hand, you can play back
multiple Songs continuously. For
details, refer to the Reference Manual
on the website.
Song Player mode
(MIDI Song, Audio Song)
Song List mode
(Common for MIDI and Audio Song)
Basic playback operations (for MIDI and Audio Songs)
 Play/Pause ([
] (PLAY/PAUSE) button)
NOTE
Press the [
] (PLAY/PAUSE) button (or touch
) to start playback of the corresponding Song (MIDI or Audio). During playback, pressing it pauses playback. Pressing it again
resumes Song playback from the current position.
 Selecting previous/next Song ([
] (PREV) or [
] (NEXT) button)
Press the [ ] (PREV) or [ ] (NEXT) button (or touch
or
) to select the previous/next Song. In the Song player mode, this operation selects the previous/next Song file
in the same folder. In the Song List mode, this operation selects the previous/next Song on
the Song List.
 Rewind/Fast Forward ([
] (PREV) or [
Hold the [ ] (PREV) or [ ] (NEXT) button (
continuously through the current file.
72
PSR-SX900/SX700 Owner’s Manual
] (NEXT) button)
or
) to move backward/forward
You can change the behavior when
pressing the [
] (PREV) button so
that it only returns the playback position to the Song top and does not move
to the previous Song, on the display
called up via [MENU]  [Song Setting]
 [Play]. For details, refer to the Reference Manual on the website.
Moving the Song Playback Position (Song Position pop-up window)
When you press and hold the [ ] (PREV) or [ ] (NEXT) button, a
For Audio Songs
setting display appears showing the current position of the Song. When
the window is shown on the display, you can also use the Data dial to
move backward/forward continuously through the current file.
The Phrase Mark number appears only when a MIDI Song containing
Phrase Marks is selected. You can select whether the Song playback
position moves backward or forward in Bar or Phrase Mark units by
For MIDI Songs
touching the setting display beforehand.
Elapsed time
Current Song
name
Current measure
number
Phrase Mark number (if the MIDI
Song contains
Phrase Mark data)
NOTE
Phrase Mark is a pre-programmed marker in certain MIDI Song data, which specifies a specific
location in the Song.
Current Song
name
Moving the Song Playback Position (progress bar on the display)
4
Singing with Song Playback—Operations While Performing
In each Song area, the current position of the Song playback is shown. This can be moved forward or backward by
moving the slider on the display.
Queuing the next Song for playback
While a MIDI Song is playing back, you can queue up the next MIDI Song for playback. This is convenient for chaining it to the next Song smoothly during live performance. To queue up, select the Song you want to play next in the
Song Selection display, while a Song is playing back. The “Next” indication appears at the upper right of the corresponding Song name. To cancel this setting, touch
(Next Cancel) on the Song Selection display.
You can also queue up the next Audio Song for playback while a Audio Song is playing back, in the same way as for a
MIDI Song.
NOTE
When the Recording function is used, the queue for playback is canceled.
Playback Operations exclusively for MIDI Song
 Synchro Start
You can conveniently start playback of a MIDI Song as soon as you start playing the keyboard. Touching
(Synchro
start) puts Synchro Start in standby status, regardless of whether the Song is currently playing or stopped. To cancel the
Synchro Start function, repeat the same operation.
 Playback Using Song Position Markers ([M], [1]–[4], [Loop])
Using Song Position markers, you can not only navigate quickly and easily through the MIDI Song data, but also set up
convenient playback loops, for ease in song arranging. For details, refer to “Using Song Position Markers” (page 75).
PSR-SX900/SX700 Owner’s Manual
73
Playback Operations exclusively for Audio Song
 Vocal Cancel
NOTE
This let you cancel or attenuate the center position of the stereo sound in Audio Song playback. This lets you sing “karaoke” style with just instrumental backing, or play the melody
part on the keyboard, since the vocal sound is usually at the center of the stereo image in
most recordings.
To turn the Vocal Cancel function on/off, first select an Audio Song, then turn on/off
(Vocal Cancel).
Though the Vocal Cancel function is
highly effective on most audio recordings, the vocal sound on some songs
may not be completely cancelled.
 Time Stretch
Like Tempo adjustment of a MIDI Song, this lets you adjust the playback speed of an
Audio Song by stretching or compressing it. To do this, touch
(Time Stretch) to call
up the setup window. Touch []/[] in this window to set the value (from 70% to 160%).
Higher values result in a faster tempo.
 Pitch Shift
Like the Transpose function of the MIDI Song, this lets you shift the pitch of an Audio
Song in semitone steps (from -12 to 12).
 A-B Repeat Playback
This lets you repeatedly play back a specified range (between points A and B).
1
Touch
2
Specify the repeat range.
(Play/Pause) to start playback.
NOTE
When playback reaches the point you want to specify as the starting point (A), turn
on
(A-B Repeat). When playback reaches the point you want to specify as
the ending point (B), touch
(A-B Repeat) again. The range from Point A to
Point B will be played back repeatedly.
Top of the Song
3
A
B
To cancel A-B repeat playback, turn off
End of the Song
(A-B Repeat).
The time of point A and B are cleared, and Repeat Playback is canceled.
Specifying the repeat range while Song playback is stopped
1. Fast-forward the Song to Point A then turn on
(A-B Repeat).
2. Fast-forward the Song to Point B then touch
74
PSR-SX900/SX700 Owner’s Manual
(A-B Repeat) again.
Specifying only Point A results in
repeat playback between Point A and
the end of Song.
Using Song Position Markers (MIDI Song only)
Song Position markers (SP1–SP4) can be placed in the MIDI Song data. This not only lets you navigate quickly and easily
through the MIDI Song data, but also lets you set up convenient playback loops—allowing you to create dynamic Song
arrangements “on the fly,” as you perform.
Entering Song Position Markers
1
Singing with Song Playback—Operations While Performing
2
4
Select the desired MIDI Song (page 68), and start playback
(page 72).
Enter the Song Position markers.
(Song Position Memorize) to turn it on.
2-1 Touch
2-2 When the Song reaches the point at which you wish to enter a marker, touch
the desired marker number ([1]–[4]) on the display.
The corresponding Song Position marker is entered, and Song
Position Memorize is automatically turned off.
3
As desired, enter other markers in the same way as step 2.
4
Pause Song Playback (page 72).
5
NOTICE
The entered marker settings will
be lost if you change to another
Song or you turn the power off
without executing the Save operation.
Save the Song.
5-1 Touch the Song name to call up the Song Selection Display.
5-2 Save the Song file (page 33).
About the status of Song Position [1]–[4]
• Off: Song Position is not entered to the button.
• Green: Song Position is entered to the button.
• Red (flashes): Playback jump is ready. See below (“Jumping to a Song Position Marker during playback”).
• Red: The Song Position has been passed and Song playback continues to the next Song button.
Jumping to a Song Position Marker during playback
Simply touching the one of the Song Position [1]–[4] during Song playback jumps to the corresponding position, after the
current played measure reaches its end. (The button will flash in red, indicating that playback jump is ready.) You can cancel the jump by touching the same Song Position again before the actual jump.
Starting playback from a specific Marker
First, touch one of Song Position [1]–[4] while Song playback is stopped, and then start playback (page 72).
PSR-SX900/SX700 Owner’s Manual
75
Using Markers in loop playback
In this section, we’ll explain loop playback by the example of looping between markers [1] and [2].
1
2
Touch
Song.
(Play/Pause) to start playback from the top of the
After passing the [1] point, touch
function on.
(Loop) to turn the loop
The Song plays back up to the [2] point, then goes back to [1] and loops between
the two points.
Top of
the song
3
Song Positions
[1]
[2]
[3]
[4]
To stop the loop and continue normal playback, touch
(Loop) again.
When this is turned off, playback continues past the [2] point.
76
End of
the song
PSR-SX900/SX700 Owner’s Manual
Displaying Score, Lyrics, and Text files during Playback
Displaying Music Notation (Score) of the MIDI Song
You can view the music notation (score) of the selected MIDI Song. We suggest that you read through the music notation
before starting to practice.
1
2
Select a MIDI Song (page 68).
Touch
(Score) on the Song Playback display to call up
the Score display.
You can look through the entire notation by touching [] or [] when Song playback is stopped. While the Song is playing back, the “ball” bounces along through
the score, indicating the current position.
4
Singing with Song Playback—Operations While Performing
For changing
the page.
NOTE
• You can call up the Score display as
well, via [MENU]  [Score].
• The instrument can display the
music notation of commercially
available music data or your
recorded Songs.
• The displayed notation is generated
by the instrument based on the Song
data. As a result, it may not be
exactly the same as commercially
available sheet music of the same
song—especially when displaying
notation of complicated passages or
many short notes.
For changing the
settings of the
Score display.
Changing the Size of the Score and Displaying Lyrics in a Score
By touching the note icon shown on the lower right of the display, you can change the settings of the Score display,
such as changing the size of the score, or displaying note names or lyrics within the score, and so on. For details on the
Score display, refer to the Reference Manual on the website.
NOTE
Lyrics can be shown only when the Song contains lyric data.
PSR-SX900/SX700 Owner’s Manual
77
Displaying Lyrics of the Song
When the selected Song contains lyric data, you can view it on the instrument’s display during playback.
1
2
Select a Song (page 68).
Touch
(Lyrics) on the Song Playback display to call up
the Lyrics display.
When the Song data contains lyrics data, the lyrics are shown on the display. You
can look through the entire lyrics by touching [] or [] when Song playback is
stopped. While the Song is playing back, the color of the lyrics changes, indicating
the current position.
NOTE
• You can call up the Lyrics display as
well, via [MENU]  [Lyrics].
• Not only MIDI Songs, but also Audio
Songs can show lyrics, if the particular Song contains compatible lyrics
data. For details, refer to the Reference Manual on the website.
For changing the page.
For details on the Lyrics display, refer to the Reference Manual on the website.
Displaying Text
Regardless of whether a Song is selected or not, you can view computer-created text files (.txt) on the instrument’s display.
To call up the display, touch
(Text) on the Song Playback display. This feature enables various useful possibilities,
such as the showing of lyrics, chord charts and performance notes. For details on the Text display, refer to the Reference
Manual on the website.
78
PSR-SX900/SX700 Owner’s Manual
Using the Talk function
The Talk function lets you instantly change the microphone settings for speaking to your
audience. This is useful when you want to make announcements between song performances without distracting reverb effects, etc.
1
Call up the Mic Setting display via [MENU]  [Mic Setting].
NOTE
• (PSR-SX900) Vocal Harmony is not
available when the Talk function is
on.
• To get the most convenient use of
this function, you can assign a foot
pedal or one of the ASSIGNABLE
buttons to turn the Talk function on/
off during a performance. For details,
refer to the Reference Manual.
2
2
Touch [Talk] on the display to turn on the Talk function.
4
To turn the function off, touch [Vocal] on the display.
PSR-SX900/SX700 Owner’s Manual
Singing with Song Playback—Operations While Performing
You can also change the Talk settings to suit your preferences. For details, refer to the Reference Manual on the website.
79
5
Operation Guide
Adjusting the Parameters of Each Part—
Mixer
The Mixer gives you intuitive control over aspects of the keyboard parts and Song/Style channels, including volume balance and the timbre of the sounds. It lets you adjust the levels and stereo position (pan) of each Voice to
set the optimum balance and stereo image, and lets you set how the effects are applied.
This section covers the basic procedures for the Mixer. For details, refer to the Reference Manual on the website.
Basic Procedure for the Mixer
1
Press the [MIXER/EQ] button to call up the Mixer display.
2
3
2
Touch the appropriate tab for editing the balance among the
desired parts.
Panel
Use this display when you want to adjust the balance among the
entire Style part, entire Multi Pad part, Left part, Right 1–3 parts,
entire MIDI Song part, Audio Song part, Mic part, Aux In Audio
part, Bluetooth Audio part (*1), and the Wireless LAN Audio
part (*2).
*1: An audio input via Bluetooth communication. The Bluetooth function may not be included depending on your area or the model.
*2: An audio input via the optional wireless LAN adaptor. The optional
USB wireless LAN adaptor may not be available depending on your
area.
80
Style
Use this display when you want to adjust the balance among the
channels of the Style. About each channel, refer to “Style Channels” (page 82).
M.Pad
Use this display when you want to adjust the balance among the
four Audio Link Multi Pads.
Song
Use this display when you want to adjust the balance among all
the parts of the MIDI Song.
Master
Unlike the other displays, use this display when you want to
adjust the tonal characteristics of the entire sound (except for
Audio Songs) of this instrument. For details on this display, refer
to page 96.
PSR-SX900/SX700 Owner’s Manual
NOTE
You can also switch among the tabs by
pressing the [MIXER/EQ] button.
3
4
5
Touch a tab for editing the desired parameters.
Filter
For adjusting Resonance, and Cutoff (sound brightness).
EQ
For adjusting equalization parameters to correct the tone or timbre of the sound.
Effect
For selecting an Effect type and adjusting its depth for each part.
Chorus/Reverb
For selecting a Chorus/Reverb type and adjusting its depth for
each part.
Pan/Volume
For adjusting panning and volume for each part.
Set the value of each parameter.
NOTE
To reset each parameter to the default
value, touch the number value or setting and hold it.
Save your Mixer settings.
 To save the Panel 1/2 Mixer settings:
Register them to Registration Memory (page 87).
 To save the Style 1/2 Mixer Settings:
Save them as a Style file to the User drive or USB flash drive. If you want to recall
the settings for future use, select the Style file saved here.
5
1 Call up the operation display via [MENU]  [Style Creator].
2 Touch [Save] to call up the Style Selection display, and then save as a Style
file (page 33).
Adjusting the Parameters of Each Part—Mixer
 To save the MIDI Song Ch 1–8 / 9–16 Mixer Settings:
When editing and saving the MIDI Song Channel settings, a different operation is
needed. For details, see “Editing and Saving the MIDI Song Ch 1–8 / 9–16 Mixer
Settings” below.
Editing and Saving the MIDI Song Ch 1–8 / 9–16 Mixer Settings
First select a MIDI Song, and edit the parameters. Second, register the edited settings as part of the MIDI Song data
(Setup), and then save the Song to the User drive or USB flash drive. If you want to recall the settings for future use, select
the Song file saved here.
1
2
3
4
5
6
Call up the operation display via [RECORDING]  MIDI [Multi
Recording].
Touch the Song name “New Song” to call up the Song Selection
display, and then select the desired Song.
Edit the desired parameters, according to “Basic Procedure for
the Mixer” (page 80) steps 1–4.
Press the [RECORDING] button to call up the MIDI Multi Recording display again.
Register the edited settings to the MIDI Song.
5-1 Touch [Setup] to call up the Setup display.
5-2 Touch [Execute] to register the edited settings as part of the MIDI Song data.
Touch [Save] to call up the Song Selection display, and then
save as a Song file (page 33).
PSR-SX900/SX700 Owner’s Manual
81
Turning Each Channel of the Style or MIDI Song On/Off
You can add variations and change the feeling of a Style or a MIDI Song by selectively turning channels on/off.
Style Channels
Each Style contains the channels listed below.
• Rhythm 1/2: These are the basic parts of the Style, containing the drum and percussion rhythm patterns.
• Bass: The bass part uses various appropriate instrument sounds to match the Style.
• Chord 1/2: These comprise the rhythmic chord backing, commonly consisting of piano or guitar Voices.
• Pad: This part is used for sustained instruments such as strings, organ, choir, etc.
• Phrase 1/2: These parts are used for punchy brass stabs, arpeggiated chords, and other extras that make the accompaniment more interesting.
1
In the Mixer display, touch the [Style] tab or [Song] tab.
2
Touch the Channel which you want to turn on/off.
Channel
If you want to play back only one particular channel (solo playback), touch and
hold the desired channel until the number is highlighted in purple. To cancel solo,
simply touch the (purple) channel number again.
3
82
As necessary, make other settings then save them as a Style file
or Song file (step 5 on page 81).
PSR-SX900/SX700 Owner’s Manual
Changing the Voice for Each Channel of the Style or MIDI Song
You can change the Voice for each channel via the Mixer display.
1
2
In the Mixer display, touch the [Style] tab or [Song] tab.
Touch the instrument icon below the channel name to call up the
Voice Selection display, then select the desired Voice.
Voice
3
As necessary, make other settings then save them as a Style file
or Song file (step 5 on page 81).
5
Adjusting the Parameters of Each Part—Mixer
PSR-SX900/SX700 Owner’s Manual
83
6
Operation Guide
Song Recording
This instrument allows you to record your performance in two ways: MIDI recording and Audio recording. In
addition, MIDI recording features two different methods: Quick Recording, which is the easiest, most convenient
way to record, and Multi Recording, which allows you to record each channel or each track independently. In this
section, we’ll take a look at MIDI Quick Recording and Audio Quick Recording.
 MIDI Quick Recording
With this method, recorded performances are saved to the instrument or a USB flash drive as an SMF (format 0)
MIDI file. If you want to re-record a specific section or change Voices and edit other parameters, use this method.
This instrument allows you to record approximately 3 MB per Song.
 Audio Quick Recording
With this method, recorded performances are saved to the instrument as an Audio file. Recording is done without
designating the recorded part. Since it is saved in stereo WAV format of normal CD quality resolution (44.1kHz/
16-bit) by default, it can be transmitted to and played on portable music players by using a computer. It can also
be recorded in MP3 format (44.1 kHz sample rate, 128/256/320 kbps bit rate, stereo). This instrument allows you
to record up to 80 minutes per single recording.
Multi Recording
• MIDI Multi Recording: This lets you create a MIDI Song consisting of 16 channels by recording your performance
to each channel one by one.
For details on Multi Recording, refer to the Reference Manual on the website.
MIDI Quick Recording
Before recording, make the necessary settings such as Voice/Style selection. As necessary,
connect the USB flash drive to the [USB TO DEVICE] terminal. With this type of recording, each part will be recorded to the following channels.
• Keyboard parts: channels 1–4
• Multi Pad parts: channels 5–8
• Style parts: channels 9–16
1
Call up the MIDI Quick Recording display via [RECORDING] 
MIDI [Quick Recording].
The display appears and a new blank Song is automatically set to record standby
status.
84
PSR-SX900/SX700 Owner’s Manual
NOTE
• Audio data such as the rhythm channels created via the audio data of
Audio Link Multi Pad and Audio
Songs cannot be recorded to the
MIDI Songs.
• Before using a USB flash drive, be
sure to read “Connecting USB
Devices” on page 107.
NOTE
To cancel the recording, touch [Stop]
on the display, and then press the
[EXIT] button, before going on to step
2.
2
Start recording.
You can start recording by playing the keyboard, starting the Style, playing a Multi
Pad or touching [Play/Pause].
3
4
After you finish your performance, touch [Stop] to stop recording.
Touch [Save] to call up the Song Selection display, then save the
recorded performance as a file (page 33).
NOTICE
The recorded Song will be lost if
you close the display or you turn
the power off without executing
the save operation.
Audio Quick Recording
Before recording, make the necessary settings such as Voice/Style selection and the microphone connection (if you want to
record your singing).
1
Call up the Audio Quick Recording display via [RECORDING] 
Audio [Quick Recording].
The display appears and a new empty audio file is created, with record standby status enabled. However, unlike MIDI Quick Recording, recording does not start automatically with keyboard performance, Style playback, or Multi pad playback.
NOTE
To cancel the recording, touch [Stop]
on the display, and then press the
[EXIT] button, before going on to step
2.
Save destination of recorded Audio Song
that is automatically determined
Recording Format
6
Song Recording
2
Touch [Play/Pause] to start recording.
NOTE
Immediately after this operation, start and record your performance.
3
After you finish performance, touch [Stop] to stop recording.
Recorded data is automatically saved to the destination as a file with the name
automatically set. The recorded Audio Song appears in the User category on the
Song Selection display.
• The destination to save the recorded
Audio Song is automatically determined, according to the connection
status of the USB flash drive. You
can change the priority storage setting via
(Menu) on the display.
• You can also change the recording
format via
(Menu) on the display.
PSR-SX900/SX700 Owner’s Manual
85
7
Operation Guide
Storing and Calling up Custom Panel Setups—Registration Memory, Playlist
The Registration Memory function and the Playlist function allow you to save (or “register”) virtually all panel
settings, and then instantly recall your custom panel settings for your performances by a simple, one-touch operation. The Playlist is especially useful for managing your repertoire, letting you select only the desired panel settings from the huge repertoire in the Registration Memory and create a new list.
 Registration Memory
This function allows you to save (register) your custom panel settings to one of the Registration Memory buttons
for easy recall.
Virtually all panel settings can be saved to a single button.
There are eight Registration Memory buttons on the panel. You can save all eight registered panel setups as a Single Registration Memory Bank file.
Save
Recall
Registration
Memory Bank file
NOTE
For information on the parameters that can be registered with the Registration Memory function, refer to the Registration section of the “Parameter Chart” in the Data List on the
website.
 Playlist
The Playlist function allows you to create your own live performance set list. You can select only the desired files
from the huge number of the Registration Memory Bank files without changing the bank file configuration.
Each Playlist Record can directly recall a specified Registration Memory in the selected Registration Memory
Bank file. You can collectively store the Playlist Records as a single Playlist file.
Registration Memory Bank files
Playlist file 01
Bank 01
Playlist Record 01
Playlist Record 02
Bank 02
Playlist Record 03
: Link to call up
86
PSR-SX900/SX700 Owner’s Manual
Saving and Recalling Custom Panel Setups with Registration Memory
Registering Your Panel Setups
1
2
Make the desired panel Settings, such as those for Voices,
Styles and Effects.
Press the [MEMORY] button in the REGISTRATION MEMORY
section to call up the Registration Memory window.
The list of items to be registered to
Registration Memory
Selecting the items to be registered
The Registration Memory window contains the list for selecting the items to be
registered. Before going on to step 3, enter or remove checkmarks by touching
the desired items. Items having checkmarks will be registered.
3
Press the desired REGISTRATION MEMORY [1]–[8] button to
which you wish to memorize the panel setup.
The memorized button lights in orange, which indicates that the button contains
data and its number is selected.
NOTICE
If you selected a button whose
lamp is lit in orange or blue here,
the panel setup previously memorized to the button will be erased
and replaced by the new settings.
7
Storing and Calling up Custom Panel Setups—Registration Memory, Playlist
About the lamp status
• Orange: Data registered and currently selected
• Blue: Data registered but not currently selected
• Off: No data registered
4
Register various panel setups to other buttons by repeating
steps 1–3.
The registered panel setup can be recalled by simply pressing the desired number
button.
NOTE
The panel setups registered in the numbered buttons are maintained even
when you turn off the power. If you want
to delete all eight current panel setups,
turn the power on while holding the B5
key (second right-most key) on the keyboard.
PSR-SX900/SX700 Owner’s Manual
87
Saving the Registration Memory as a Bank file
You can save all eight registered panel setups as a Single Registration Memory Bank file.
1
Press the REGIST BANK [-] and [+] buttons simultaneously to
call up the Registration Bank Selection display.
2
2
Touch
(File Edit) to call up the pop-up window, and then
touch [Save] to save the Bank file.
For instructions on saving, refer to “File Management” (page 33).
NOTE
You can tag Registration Memory Bank
files for easy search. For details, refer to
the Reference Manual on the website.
Recalling a Registered Panel Setup from a Bank file
The saved Registration Memory Bank files can be recalled by using the REGIST BANK
[-]/[+] buttons or the following procedure.
1
2
Press the REGIST BANK [-] and [+] buttons simultaneously to
call up the Registration Bank Selection display.
Touch and select the desired Bank on the display.
You can also use the REGIST BANK [-]/[+] buttons to select a Bank.
3
Press one of the blue-lit numbered buttons ([1]–[8]) in the Registration Memory section.
The selected button lights in orange.
88
PSR-SX900/SX700 Owner’s Manual
NOTE
• When recalling setups that include
Song, Style or text files selected from
a USB flash drive, make sure that the
appropriate USB flash drive containing the registered Song, Style or text
is connected into the [USB TO
DEVICE] terminal.
• Before using a USB flash drive, be
sure to read “Connecting USB
Devices” on page 107.
NOTE
Turning the [FREEZE] button on lets
you disable recall of specific item(s) as
desired. For instructions, refer to the
Reference Manual on the website.
NOTE
You can also call up the eight setups by
using pedals or Assignable buttons in
any order you specify via [MENU] 
[Regist Sequence]. For details, refer to
the Reference Manual on the website.
Confirming the Registration Memory Bank Information
You can call up the information display to confirm which Voices, Style and Songs are memorized to the [1]–[8] buttons of
a Registration Memory Bank.
1
2
Call up the Registration Bank Selection display, then select the
desired Bank.
Touch
(Menu) then [Regist Bank Info] to call up the Regist
Bank Information display.
This display consists of two pages: Voice-related, and Style-related. You can switch
between the two via [Voice]/[Style] on the display.
NOTE
If a certain Voice part is set to off, the
Voice name for the corresponding part
is shown in gray.
For switching pages.
Touch to select the desired Registration Memory. The selected Registration is automatically loaded.
3
Press the [EXIT] button to close the information display.
Editing a Registration Memory Bank
7
You can edit a Registration Memory Bank (delete or rename each Registration Memory, etc.) in the Regist Bank Edit display.
2
Storing and Calling up Custom Panel Setups—Registration Memory, Playlist
1
Call up the Registration Bank Selection display, then select the
desired Bank.
Touch
(Menu) then [Regist Bank Edit] to call up the Regist
Bank Edit display.
3
3
Edit the Registration Memory Bank information.
Touch to select the desired Registration Memory. The Registration Memory is
selected as a editing target, but not actually loaded.
• To change the name of the selected Registration, touch [Rename].
• To delete the selected Registration, touch [Delete].
4
Touch
file.
(Save) to save the edited Registration Memory Bank
PSR-SX900/SX700 Owner’s Manual
89
Managing a Large Repertoire by Using the Playlist
The Playlist is useful for managing multiple set lists for your live performances. You can select only the desired files from
a large repertoire (the huge number of the Registration Memory Bank files) and create a new set list for each performance.
Creating a new Playlist
1
Press the [PLAYLIST] button to call up the Playlist display.
2
2
Touch
(New) on the display.
A new Playlist file is created.
Adding a Record to the Playlist
By adding a Record to the Playlist, you can directly recall your desired Registration Memory.
1
Press the [PLAYLIST] button to call up the Playlist display.
The Playlist file which was selected the last time appears. (The sample preset Playlist will appear for the first time.)
2
3
2
Add a Record to the Playlist.
 To add a Record via the Registration Bank Selection display:
2-1 Touch Add Record [List] on the display.
The Registration Bank Select display appears.
2-2 Select the desired Registration Bank file to register as a Playlist Record.
Touching [Add to Playlist] closes the display, and the new Playlist Record is
added to the Playlist.
 To add a Record by using the search function:
Touching Add Record [Search] on the display calls up the operation display for
searching the desired Registration Bank file. For details on searching for files, refer
to the Reference Manual on the website.
From the search result, select the desired file and then touch [Add to Playlist] to
close the display, and the new Playlist Record is added.
90
PSR-SX900/SX700 Owner’s Manual
3
If necessary, edit the Playlist Record.
The newly added Playlist Record simply recalls the selected registration Bank file.
If you want to set more detailed settings (such as directly recalling a specified Registration Memory and automatically switching the screen view), you can edit the
Playlist Record.
3-1 Touch [Edit] to call up the Record Edit display.
Record Name
File path of the Registration Memory Bank file
linked to the Record. This file will be recalled by
selecting the Record. (This is only displayed,
and cannot be changed.)
3-2 Touch to edit the Record.
Record Name
Determines the name of the Record. Touching [Rename] calls up the Character Entry window.
Action
Additional actions after selecting the Record and recalling the Bank.
• Load Regist Memory: Recalls the Registration Memory corresponding to the selected
number. When no item is selected, no Registration Memory is recalled.
• View: Displays the selected view. When no item is selected, no view is displayed.
3-3 Close the display.
4
Touch
list file.
(Save) to save the added Record to the current Play-
7
To recall the registered Record, touch the desired Record on the Playlist display.
Storing and Calling up Custom Panel Setups—Registration Memory, Playlist
PSR-SX900/SX700 Owner’s Manual
91
Recalling custom panel setups via the Playlist
1
Press the [PLAYLIST] button to call up the Playlist display.
2
4
2
3
4
Touch the Playlist file name to call up the Playlist File Selection
display.
Touch the desired Playlist file, and then close the display.
Touch the Record name on the Playlist display, and then touch
[Load].
The Registration Memory Bank registered as the Playlist Record is recalled and the
Action you’ve made is executed (page 90.)
Copying the Playlist Records (Append Playlist)
“Append Playlist” allows you to copy the existing Playlist file as a new Playlist file.
1
Press the [PLAYLIST] button to call up the Playlist display.
2
Touch [Append Playlist] on the display.
The Playlist File Selection display appears.
3
Touch the desired Playlist file to append.
All Records in the selected Playlist file are added at the bottom of the current Playlist.
4
92
Touch
(Save) to save the appended Records to the current
Playlist file.
PSR-SX900/SX700 Owner’s Manual
Changing the order of the Records in the Playlist
1
2
Press the [PLAYLIST] button to call up the Playlist display.
Change the order of the Records.
2-1 Touch the desired Record you want to move.
2-2 Touch
(Up)/
(Down) to move the Record you selected in Step 21.
3
Touch
(Save) to save the edited Playlist file.
Deleting the Playlist Record from the Playlist
1
On the Playlist display, touch the desired Record to select it.
2
Touch [Delete] on the display.
A confirmation message appears here. To cancel the deletion, touch [No].
3
Touch [Yes].
4
Touch
(Save) to save the edited Playlist file.
7
Storing and Calling up Custom Panel Setups—Registration Memory, Playlist
PSR-SX900/SX700 Owner’s Manual
93
8
Operation Guide
Customizing for Optimum Performance
You can customize the instrument for your own personal preferences and optimum performance. This section covers how to edit shortcuts on the Home display, set ASSIGNABLE buttons, make global settings, adjust the sound
at the final output, and add expansion contents, such as Voices and Styles.
Customizing the Shortcuts on the Home Display
You can register an often used function to a shortcut on the Home display. Although six shortcuts are registered by default,
you can customize them as necessary. Registered shortcuts are shown in the Shortcut area (page 26) at the bottom of the
Home display, allowing you to quickly call up the desired function from the Home display.
1
Call up the Assignable display via [MENU]  [Assignable].
2
2
Double-tap (touch twice) the desired item from the six locations
of the “Home Shortcuts” area.
The function selection pop-up window appears.
3
Touch the desired function.
The function will be registered to the location selected in step 2.
Setting the Functions or Shortcuts to the ASSIGNABLE Buttons
You can assign various control functions or shortcuts to the ASSIGNABLE [A]–[F] buttons, allowing you to quickly operate or call up the desired function.
1
Call up the Assignable display via [MENU]  [Assignable].
2
2
Double-tap (touch twice) the desired item from the “Assignable
Buttons” area.
The function selection pop-up window appears.
3
Touch the desired function.
The function will be registered to the location selected in step 2.
94
PSR-SX900/SX700 Owner’s Manual
NOTE
For details on assignable parameters
and functions, refer to the Reference
Manual on the website.
Making Global Settings (Utility)
The Utility function provides a variety of convenient tools and settings for this instrument. These include general settings
that affect the entire instrument, as well as detailed settings for specific functions. Also included are data reset functions
and storage media control, such as disk formatting.
Basic Procedure
1
Call up the operation display.
[MENU]  [Utility]
Customizing for Optimum Performance
2
Touch the desired tab to call up the desired page, and change
the settings or execute the operation.
Speaker/Connectivity
(PSR-SX900),
Speaker (PSR-SX700)
Determines how the sound is output from the speaker. On
the PSR-SX900, it also determines the display out setting
when a USB display adaptor is connected.
Touch Screen/Display
Contains display-related settings such as brightness, display
speed, and touch sound On/Off settings.
Parameter Lock
Specifies the parameters to make them selectable only via
the panel control.
Storage
Lets you execute the Format operation or check the memory
capacity (approximate value) of the USB flash drive connected to this instrument. (page 108)
System
Indicates the firmware version and the hardware ID of this
instrument, and lets you make basic settings, such as the language for the display, Auto Power Off function On/Off.
(pages 21, 98)
Factory Reset/Backup
Backs up/restores whole or a part of the instrument or initializes the instrument to the factory default. (page 99)
8
For more information of each tabs, refer to the “Utility” of the Reference Manual
on the website.
PSR-SX900/SX700 Owner’s Manual
95
Adjusting the Sound at the Final Output (Master Compressor, Master EQ)
You can adjust the sound quality and the volume at the final output from the instrument by making the Master Compressor
and the Master EQ settings.
1
Press the [MIXER/EQ] button to call up the Mixer display.
2
Touch the “Master” tab.
2
3
3
4
5
Touch a tab for editing the desired parameters.
Compressor
Lets you turn the Master Compressor (which is applied to the
entire sound except audio playback) on or off, select the Master
Compressor type, and edit the related parameters. Your original
edits can be saved as the Master Compressor type.
EQ
Lets you select the Master EQ type applied to the entire sound
except audio playback and edit the related parameters. Your original edits can be saved as the Master EQ type.
Set the value of each parameter.
Save the settings.
Your original edits can be stored as a Master Compressor type and Master EQ type.
If you want to recall the settings for future use, select the corresponding type at the
upper right of each display.
5-1 Touch
(Save) in the “Compressor” display or “EQ” display.
5-2 Select one of USER1–USER30, then touch [Save] to call up the Character
Entry window.
5-3 In the Character Entry window, change the name as necessary, then touch
[OK] to save the data.
96
PSR-SX900/SX700 Owner’s Manual
NOTE
For more information about these
parameters, refer to the Reference Manual on the website.
NOTE
To reset each parameter to the default
value, touch the number value or setting and hold it.
Adding New Contents—Expansion Packs
By installing Expansion Packs, you can add a variety of optional Voices and Styles to the “Expansion” folder in the User
drive. The installed Voices and Styles can be selected via the User tab in the Voice or Style Selection displays, allowing you
to expand your music performance and creation possibilities. You can get high quality Expansion Pack data created by
Yamaha, or create your own original Expansion Pack data by using the “Yamaha Expansion Manager” software on your
computer. For instructions on how to install the Expansion Packs, refer to the Reference Manual on the website.
For more information about Expansion Packs, access the Sound & Expansion Libraries page at the Yamaha MusicSoft
website:
https://www.yamahamusicsoft.com/sound-and-expansion-libraries/
To obtain the Yamaha Expansion Manager software and its manuals, access the following website, and search by the model
name of your instrument, “PSR-SX900” or “PSR-SX700.”
https://download.yamaha.com/
Customizing for Optimum Performance
8
PSR-SX900/SX700 Owner’s Manual
97
9
Operation Guide
System Settings
This section explains how to make important overall, system-related settings, including backup/restore of settings
and file data.
Confirming the Firmware Version and Hardware ID
You can check the firmware version and hardware ID of this instrument.
1
Call up the operation display via [MENU]  [Utility].
2
Touch [System].
The program version and the hardware ID are shown in the display.
Restoring the Factory-programmed Settings
While holding the right-most key on the keyboard, turn the power on. This restores all settings to the factory default.
Right-most key
98
PSR-SX900/SX700 Owner’s Manual
NOTE
• You can also restore the factory
default value of specified settings or
delete all files/folders in the User
drive on the display called up via
[MENU]  [Utility]  [Factory
Reset/Backup]  page 1/2. For
details, refer to the “Utility” of the
Reference Manual on the website.
• If you simply want to restore the
default value of any parameter you’ve
changed, touch and hold the value
on the display (page 30).
Data Backup and Restore
Data Backup
You can back up all data in the User drive of this instrument (except for Expansion Voices/
Styles) and all settings to the USB flash drive as a single file. This procedure is recommended for data security and backup in case of damage.
1
2
Connect the USB flash drive to the [USB TO DEVICE] terminal as
backup destination.
Call up the display via [MENU]  [Utility]  [Factory Reset/
Backup]  page 2/2.
3
NOTE
• Before using a USB flash drive, be
sure to read “Connecting USB
Devices” on page 107.
• You can back up User data such as
Voice, Song, Style, and Registration
Memory by copying them individually to a USB flash drive. For instructions, refer to page 33.
• If the total size of the target data for
backup exceeds 3.9 GB (excluding
Audio files), the backup function is
not available. If this happens, back
up the User data by copying the
items individually.
• You can save the System settings,
MIDI settings, User Effect settings,
and Playlist Records individually.
If you want to include the audio files to the backup file:
Before going on to step 3, enter a checkmark by touching the “Include Audio files”
checkbox.
Touch [Backup] to save the backup file to the USB flash drive.
System Settings
3
Restoring the Backup file
To do this, touch [Restore] in step 3 above. When the operation is complete, the instrument
will be restarted automatically.
NOTICE
Completing the backup/restore
operation may take a few minutes. Do not turn off the power
during backup or restoring. If you
turn off the power during backup
or restoring, data may be lost or
damaged.
PSR-SX900/SX700 Owner’s Manual
9
99
Connections—Using Your Instrument with
Other Devices
This chapter covers the connections of this instrument to other devices. To see where the connectors are located on
the instrument, refer to pages 16–19.
CAUTION
Before connecting the instrument to other electronic components, turn off the power of all components. Also,
before turning any components on or off, make sure to set all volume levels to minimum (0). Otherwise, damage to the components, electrical shock, or even permanent hearing loss may occur.
Connecting a Microphone or Guitar ([MIC/GUITAR INPUT] jack)
By connecting a microphone, you can sing along with your keyboard performance or with Song playback, as well as record
your vocal performance to an Audio Song. You can also connect a guitar to the [MIC/GUITAR INPUT] jack, and output
the sound from the speakers of this instrument.
Connecting a microphone or guitar to the instrument
1
Before connecting a microphone or guitar, set the [GAIN] knob
to the minimum position.
NOTE
Make sure to use a conventional
dynamic microphone.
NOTE
• When you are not using a microphone/guitar, disconnect the cable
from the [MIC/GUITAR INPUT] jack.
• Always set the [GAIN] knob to minimum when nothing is connected to
the [MIC/GUITAR INPUT] jack. Since
the [MIC/GUITAR INPUT] jack is
highly sensitive, it may pick up and
produce noise even when nothing is
connected.
2
Set the [MIC GUITAR] switch.
NOTE
When connecting a microphone, set it to “MIC.” When connecting a guitar, set it to
“GUITAR.”
2
100
PSR-SX900/SX700 Owner’s Manual
3
(standard 1/4”
phone plug)
When you use a guitar with active pickups, set the [MIC GUITAR] switch to
“MIC,” since doing so can reduce
noise.
3
4
Connect the microphone or guitar to the [MIC/GUITAR INPUT]
jack.
Turn on the power of the instrument.
Adjusting the input level of the microphone or guitar
1
If necessary, turn on the microphone.
2
Call up the Mic Setting display via [MENU]  [Mic Setting].
NOTE
The Mic Setting display can also be
called up by pressing the [MIC SETTING/VOCAL HARMONY] (PSRSX900) or [MIC SETTING] (PSRSX700) button.
Connections—Using Your Instrument with Other Devices
Input level meter
3
Adjust the [GAIN] knob on the rear panel while singing into the
microphone or playing the guitar.
Adjust the [GAIN] knob so that the input level meter on the display lights in green
or yellow. Make sure that the meter does not light in orange or red, since this indicates that the input level is too high.
4
NOTE
You can also check the input level on
the SIGNAL lamp on the [MIC SETTING/VOCAL HARMONY] (PSRSX900) or [MIC SETTING] (PSRSX700) button. Make sure that the lamp
does not light in orange.
Adjust the volume balance between the microphone or guitar
sound and the instrument sound on the Mixer display (page 80).
Disconnecting the microphone or guitar
1
2
Set the [GAIN] knob on the rear panel to the minimum position.
Disconnect the microphone or guitar from the [MIC/GUITAR
INPUT] jack.
PSR-SX900/SX700 Owner’s Manual
101
Using an External Speaker System for Playback (MAIN OUTPUT jacks, SUB
(AUX) OUTPUT jacks (PSR-SX900))
The MAIN OUTPUT jacks are used to send this instrument’s output to a keyboard amplifier, stereo sound system or mixing console. If you are connecting the instrument to a mono
sound system, use only the MAIN OUTPUT [L/L+R] jack. When only this jack is connected (using a standard phone plug), the left and right channels are combined and output
through this jack—providing a convenient mono mix of the stereo sound.
Powered speaker
NOTE
Use audio cables and adaptor plugs
having no (zero) resistance.
NOTICE
To avoid possible damage, first
turn on the power to the instrument, then to the external device.
When turning off the power, first
turn off the power to the external
device, then to the instrument.
Since this instrument’s power
may automatically be turned off
due to the Auto Power Off function
(page 21), turn off the power to
the external device, or disable
Auto Power Off when you do not
intend to operate the instrument.
Input jack
Phone plug
(standard)
Phone plug
(standard)
Audio signal
Audio cable
You can use the instrument’s [MASTER VOLUME] dial to adjust the volume of the sound
output to the external device.
Using the SUB (AUX) OUTPUT jacks (PSR-SX900)
You can use the SUB (AUX) OUTPUT jacks as SUB OUTPUT jacks, sending a specific part to any desired SUB
(AUX) OUTPUT jack. Also, you can use these jacks as AUX OUTPUT jacks by switching the function of the jacks to
“AUX.”
The operation display can be called up via [MENU]  [Line Out]. For details, refer to the Reference Manual on the
website.
NOTICE
Do not route the output from the SUB (AUX) OUTPUT jacks to the AUX IN jack. If you make this connection, the signal input at the AUX IN jack is
output from the SUB (AUX) OUTPUT jacks, possibly resulting in a feedback loop that will make normal performance impossible, and may even
damage the equipment.
NOTE
The output volume from SUB (AUX) OUTPUT jacks cannot be controlled by the MASTER VOLUME control.
102
PSR-SX900/SX700 Owner’s Manual
Listening to Audio Playback by the External Device through the Instrument’s Speaker
Audio playback by the connected device can be output from the instrument's speaker. To
input audio, connect an external device by one of the following methods.
• Connecting to the [AUX IN] jack by using an audio cable
• Connecting by Bluetooth (Bluetooth Audio function) (PSR-SX900)
NOTE
• The volume of the audio input can be
adjusted from the external device.
• You can adjust the volume balance
among the sounds of the instrument
and the audio input in the Mixer display. (page 80)
Connecting to an Audio Player by using an Audio Cable ([AUX IN] jack)
You can connect the headphone jack of an audio player such as a smartphone and portable
audio player to the instrument’s [AUX IN] jack. Audio playback on the connected device is
output from the built-in speakers of this instrument.
NOTICE
Connections—Using Your Instrument with Other Devices
To avoid damage to the devices,
first turn on the power to the
external device, then to the
instrument. When turning off the
power, first turn off the power to
the instrument, then to the external device.
NOTE
Portable audio
player
Headphone jack
Phone plug
(stereo mini)
Phone plug
(stereo mini)
• The input signal from the AUX IN
jack is affected by the setting of the
instrument’s [MASTER VOLUME]
dial, and the volume balance with
other parts such as entire keyboard
can be adjusted by the Mixer display
(page 80).
• Use audio cables and adaptor plugs
having no (zero) resistance.
Audio signal
Audio cable
PSR-SX900/SX700 Owner’s Manual
103
Connecting to an Audio Player via Bluetooth communication (PSRSX900)
Before using the Bluetooth function, be sure to read “About Bluetooth” on page 105.
You can play the sound of the audio data saved in a Bluetooth-equipped device, such as a smartphone or portable audio
player, on this instrument and listen to it through the built-in speaker of the instrument.
 Bluetooth-equipped device:
In this manual, “Bluetooth-equipped device” refers to a device that can transmit audio data to the instrument via Bluetooth
wireless communication. For proper operation, the device must be compatible with A2DP (Advanced Audio Distribution
Profile).
Instrument
Bluetooth-equipped
device
To confirm Bluetooth capability of your instrument
The PSR-SX900 is equipped with Bluetooth functionality; however, even that model may not support Bluetooth,
depending on the country in which you purchased the product. If the “Bluetooth” icon is shown in the Menu 2 display,
this means that the product is equipped with Bluetooth functionality.
1
Call up the Bluetooth display via [MENU]  [Blutetooth].
2
Device name
3
2
Make sure that the Bluetooth function is set to “On.”
If you wish to connect your Bluetooth-equipped device to the instrument, the
device needs to be paired with the instrument. If the device and the instrument have
already been paired, go to step 4.
3
Touch [Pairing] to enter the paring standby state.
Popup window is shown that means the instrument is waiting for paring process.
4
On your Bluetooth-equipped device, set the Bluetooth function
to on and select this instrument (the device name is shown on
the display in step 1) from the connection list.
After pairing is completed, the name of the Bluetooth-equipped device and “Connected” are shown in the display.
104
PSR-SX900/SX700 Owner’s Manual
NOTE
• “Pairing” means to register Bluetooth-equipped devices on this
instrument, and establish the mutual
recognition for wireless communication between the two.
• Bluetooth headphones or speakers
cannot be paired.
NOTE
If you are required to enter a password,
enter the numerals “0000.”
5
Play back audio data on the Bluetooth-equipped device to confirm that the built-in speakers of the instrument can output the
audio sound.
Once the device has been paired with the instrument, there is no need to perform
pairing again.
When you turn on the instrument the next time, the last-connected Bluetoothequipped device will be connected to this instrument automatically, if the Bluetooth function of the Bluetooth-equipped device and the instrument is set to on. If it
is not connected automatically, select this instrument from the connection list on
the Bluetooth-equipped device.
NOTE
Only one device can be connected to
this instrument at a time (although up
to eight devices can be paired to this
instrument). When pairing with the 9th
device has succeeded, pairing data for
the device with the oldest connection
date will be deleted.
About Bluetooth
Bluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft.)
employing the 2.4 GHz frequency band.
Connections—Using Your Instrument with Other Devices
 Handling Bluetooth communications
• The 2.4 GHz band used by Bluetooth compatible devices is a radio band shared by many types of equipment. While
Bluetooth compatible devices use a technology minimizing the influence of other components using the same radio
band, such influence may reduce the speed or distance of communications and in some cases interrupt communications.
• The speed of signal transfer and the distance at which communication is possible differs according to the distance
between the communicating devices, the presence of obstacles, radio wave conditions and the type of equipment.
• Yamaha does not guarantee all wireless connections between this unit and devices compatible with Bluetooth function.
PSR-SX900/SX700 Owner’s Manual
105
Connecting Footswitches/Foot Controllers (FOOT PEDAL jacks)
The FC4A or FC5 footswitches and the FC7 foot controller (sold separately) can be connected to one of the FOOT PEDAL
jacks. A footswitch can be used for switching functions on and off, while a foot controller controls continuous parameters
such as volume.
NOTE
Do not connect or disconnect the pedal
when the power is on.
Foot Pedals
FC4A
FC5
FC7
By default, each jack features the following function. Use the FC4A or FC5 footswitch.
• FOOT PEDAL [1]............... Switches sustain on or off.
• FOOT PEDAL [2]............... Controls the Super Articulation Voices (page 63).
You can also change the function assignments to the pedals as desired.
 Example: Controlling MIDI Song Start/Stop by footswitch
Connect a footswitch (FC4A or FC5) to one of the FOOT PEDAL jacks.
To assign the function to the connected pedal, select “Song MIDI Play/Pause” in the operation display: [MENU]  [Assignable].
106
PSR-SX900/SX700 Owner’s Manual
NOTE
For a list of the functions you can
assign to the pedals, refer to the Reference Manual on the website.
Connecting USB Devices ([USB TO DEVICE] terminal)
You can connect a USB flash drive, USB display adaptor or a USB wireless LAN adaptor to the [USB TO DEVICE] terminal. You can save data you’ve created on the instrument to the USB flash drive (page 33), as well as connect to an external
monitor by using a USB display adaptor to show the instrument’s display (page 109), or connect the instrument to a smart
device via USB wireless LAN adaptor (page 108).
Precautions when using the [USB TO DEVICE] terminal
This instrument features a built-in [USB TO DEVICE] terminal. When connecting a USB device to the terminal, be sure
to handle the USB device with care. Follow the important precautions below.
NOTE
For more information about the handling of USB devices, refer to the owner’s manual of the USB device.
The instrument does not necessarily support all commercially available USB devices. Yamaha cannot guarantee
operation of USB devices that you purchase. Before purchasing a USB device for use with this instrument, please
visit the following web page:
https://download.yamaha.com/
Although USB devices 1.1 to 3.0 can be used on this
instrument, the amount of time for saving to or loading
from the USB device may differ depending on the type of
data or the status of the instrument.
NOTICE
The rating of the [USB TO DEVICE] terminal is a maximum of 5V/
500mA. Do not connect USB devices having a rating above this,
since this can cause damage to the instrument itself.
 Connecting a USB device
When connecting a USB device to the [USB TO
DEVICE] terminal, make sure that the connector on the
device is appropriate and that it is connected in the proper
direction.
NOTICE
• When connecting then disconnecting the USB device (and vice
versa), make sure to wait a few seconds between the two operations.
• Do not use an extension cable when connecting a USB device.
Connections—Using Your Instrument with Other Devices
 Compatible USB devices
• USB flash drive
• USB display adaptor (PSR-SX900)
• USB wireless LAN adaptor (UD-WL01; sold separately)
Other USB devices such as a computer keyboard or
mouse cannot be used.
NOTE
If you intend to connect two or more devices at the same time to a terminal, you
should use a bus-powered USB hub. Only one USB hub can be used. If an error
message appears while using the USB hub, disconnect the hub from the instrument, then turn on the power of the instrument and reconnect the USB hub.
 Using USB flash drives
By connecting the instrument to a USB flash drive, you
can save data you’ve created to the connected device, as
well as read data from the connected device.
 Maximum number of USB flash drives allowed
Up to four USB flash drives can be connected to the [USB
TO DEVICE] terminal. (If necessary, use a USB hub. The
number of USB flash devices that can be used simultaneously with musical instruments even when a USB hub is
used is a maximum of four.)
 Formatting a USB flash drive
You should format the USB flash drive only with this
instrument (page 108). A USB flash drive formatted on
another device may not operate properly.
NOTICE
The format operation overwrites any previously existing data. Make
sure that the USB flash drive you are formatting does not contain
important data. Proceed with caution, especially when connecting
multiple USB flash drives.
 To protect your data (write-protect)
To prevent important data from being inadvertently
erased, apply the write-protect provided with each USB
flash drive. If you are saving data to the USB flash drive,
make sure to disable write-protect.
NOTICE
Avoid connecting or disconnecting the USB device while executing
playback/recording and file management operations (such as Save,
Copy, Delete and Format), or when accessing the USB device. Failure to observe this may result in “freezing” of the operation of the
instrument or corruption of the USB device and the data.
 Turning off the instrument
When turning off the instrument, make sure that the
instrument is NOT accessing the USB flash drive by playback/recording or file management (such as during Save,
Copy, Delete and Format operations). Failure to do so
may corrupt the USB flash drive and the data.
PSR-SX900/SX700 Owner’s Manual
107
Formatting a USB flash drive or the internal User drive
To format a USB flash drive or the internal User drive, execute the Format operation. In
order to format a USB flash drive, make sure that a USB flash drive is properly connected
to the [USB TO DEVICE] terminal beforehand.
1
2
Connect a USB flash drive for formatting to the [USB TO
DEVICE] terminal.
Call up the operation display via [MENU]  [Utility]  [Storage].
NOTICE
The Format operation deletes any
previously existing data. Make
sure that the USB flash drive you
are formatting does not contain
important data. Proceed with
caution, especially when connecting multiple USB flash
drives.
4
3
Touch the name of the desired drive to be formatted in the
device list.
The indications USB 1, USB 2, etc. are displayed, depending on the number
assigned to the connected device.
4
Touch [Format] to execute the Format operation, and then follow
the onscreen instructions.
Connecting to an iPhone/iPad ([USB TO DEVICE], [USB TO HOST], or MIDI terminals)
You can use a smart device, such as an iPhone or iPad, with the instrument for a variety of
musical purposes by connecting it to the instrument. By using application tools on your
smart device, you can take advantage of convenient functions and get more enjoyment out
of this instrument.
You can make connections by one of the following methods.
• Connect to the [USB TO DEVICE] terminal via the USB wireless LAN adaptor: UDWL01 (*).
• Connect to the [USB TO HOST] terminal via a Wireless MIDI Adaptor: UD-BT01 (*)
• Connect to the MIDI terminals via a Wireless MIDI Adaptor: MD-BT01 (*)
* These accessories are sold separately, but may not be available depending on your area.
For details on connections, refer to the “Smart Device Connection Manual for iOS” and the
Reference Manual on the website.
For information about the compatible smart devices and application tools, access the following page:
https://www.yamaha.com/kbdapps/
108
PSR-SX900/SX700 Owner’s Manual
NOTICE
Do not place your iPhone/iPad in
an unstable position. Doing so
may cause the device to fall and
result in damage.
NOTE
When you use the instrument along
with an application on your iPhone/
iPad, we recommend that you first set
“Airplane Mode” to “ON” then set “WiFi” to “ON” on your iPhone/iPad in
order to avoid noise caused by communication.
Viewing the Instrument’s Display on an External Monitor (PSR-SX900)
By connecting with an external monitor such as a television, you can separately show the
lyrics/text or duplicate the instrument display (mirroring) on an external monitor. Use a
USB display adaptor and a display cable which are compatible with both this instrument
and the monitor to connect to the [USB TO DEVICE] terminal of this instrument.
NOTICE
When connecting the USB display
adaptor, connect directly to the
[USB TO DEVICE] terminal on the
instrument. (Do not use a USB
hub.)
For a list of compatible USB display adaptors, visit the following website:
https://download.yamaha.com/
Connections—Using Your Instrument with Other Devices
External monitor
USB display adaptor
Display cable
Set the display content that is to be output via [MENU]  [Utility]  [Speaker/Connectivity].
Lyrics/Text
Only the lyrics of the Song or text files (whichever you used last time) are
output, regardless of the display that is called up on the instrument.
Mirroring
The currently selected display is output.
NOTE
Before using the [USB TO DEVICE] terminal, be sure to read “Precautions
when using the [USB TO DEVICE] terminal” on page 107.
PSR-SX900/SX700 Owner’s Manual
109
Connecting to a Computer ([USB TO HOST] terminal)
By connecting a computer to the [USB TO HOST] terminal, you can transfer data between
the instrument and the computer via MIDI. For details on using a computer with this instrument, refer to the “Computer-related Operations” on the website.
NOTICE
Use an AB type USB cable of less
than 3 meters. USB 3.0 cables
cannot be used.
NOTE
• When using a USB cable to connect
the instrument to your computer,
make the connection directly without
passing through a USB hub.
• The instrument will begin transmission a short time after the USB connection is made.
• For information on setting up your
sequence software, refer to the
owner’s manual of the relevant software.
Type B
Type A
USB cable
Connecting External MIDI Devices (MIDI terminals)
Use the [MIDI] terminals and standard MIDI cables to connect external MIDI devices (keyboard, sequencer, etc.).
• MIDI IN.....................Receives MIDI messages from another MIDI device.
• MIDI OUT.................Transmits MIDI messages generated by the instrument to another MIDI device.
MIDI IN
MIDI OUT
MIDI device
MIDI transmission
MIDI IN
MIDI OUT
MIDI reception
The MIDI settings such as transmit/receive channels on the instrument can be set via
[MENU]  [MIDI]. For details, refer to the Reference Manual on the website.
110
PSR-SX900/SX700 Owner’s Manual
NOTE
For a general overview of MIDI and how
you can effectively use it, refer to “MIDI
Basics,” which is downloadable from
the website.
Function List
This section simply and very briefly explains what you can do in the displays called up by pressing the buttons on
the panel, or by touching each icon on the Menu display.
For more information, refer to the page indicated below or the Reference manual on the website.
The “” mark indicates that the detailed information is described in the Reference Manual.
Displays accessible by the panel buttons
Display
Button to access
Home
[DIRECT ACCESS] +
[EXIT]
Menu
[MENU]
Song Playback
Playlist
Song Recording
STYLE category selection
buttons
SONG [PLAYER]
[PLAYLIST]
SONG [RECORDING]
Mixer
[MIXER/EQ]
Style Selection
Voice Selection
Multi Pad
Selection
Registration
Memory Bank
Selection
Registration
Memory window
Description
Portal of the instrument’s display structure, which provides at-aglance information on all current settings.
By touching each of the icons, you can call up the menus for the
various functions listed below.
Reference
Manual
26
-
29
-
40
-
66, 72
90
84



80

For assigning Voices to each of the keyboard parts.
48

For selecting Multi Pads.
53

REGIST BANK SELECT
[-]/[+]
For selecting Registration Memory Banks.
88

[MEMORY]
For registering the current panel settings.
87
-
PART SELECT [LEFT]–
[RIGHT 3], VOICE
category selection buttons
MULTI PAD CONTROL
[SELECT]
For selecting Style files.
Pages
For controlling Song playback.
For selecting and editing Playlists, and managing your repertoire.
For recording your performance.
For adjusting the parameters of each part, such as volume, pan,
and EQ. It also allows you to adjust overall sound controls, such as
Master Compressor and Master EQ.
Function List
Menu display functions
Menu
Channel On/Off
Voice Part Setup
Line Out (PSR-SX900)
Score
Lyrics
Text Viewer
Chord Looper (PSR-SX900)
Mic Setting
Vocal Harmony (PSR-SX900)
Kbd Harmony/Arp
Split & Fingering
Regist Sequence
Regist Freeze
Tempo
Metronome
Live Control
Description
Pages
For turning on and off the each channel of the Style, and MIDI Song.
For making detailed settings such as Voice Edit and Effect settings of the keyboard
parts.
Determines which jack is used to output each part and each drum & percussion
instrument.
For displaying the music notation (score) of the current MIDI Song.
For displaying the lyrics of the current Song.
For displaying text files created on your computer.
For recording a sequence of the chords and playing it back in a loop.
For making settings for the microphone and guitar sound.
For adding Vocal Harmony effects to your singing. You can edit the Vocal Harmony
and save as your original harmony.
For adding the Harmony/Arpeggio effect to the right-hand section of the keyboard.
Parameters such as Harmony/Arpeggio type can be set.
For setting the Split Point or change the Chord Fingering type and Chord Detection
area.
Determines the order for calling up Registration Memory settings when using the
pedal.
Determines the item(s) that remain unchanged even when you call up panel setups
from the Registration Memory.
For adjusting the tempo of MIDI Song, Style or Metronome. The same operation as
using Tempo [-]/[+] and [RESET/TAP TEMPO] buttons can be done on the display.
For making settings of the metronome and the [RESET/TAP TEMPO] button.
Determines the functions assigned to the LIVE CONTROL knobs.
-
Reference
Manual

-

-

77
78
60
101





70

50

42, 45,
47

-

-

42

37
56


PSR-SX900/SX700 Owner’s Manual
111
Menu
Assignable
Panel Lock
Demo
Voice Edit
Style Creator
Song Recording
M.Pad Creator
Voice Setting
Style Setting
Song Setting
Chord Tutor
Scale Tune
Master Tune
Transpose
Keyboard/Joystick
Expansion
MIDI
Utility
Bluetooth*1 (PSR-SX900)
Time*2
Wireless LAN*2
Description
Determines the functions assigned to the pedals, assignable buttons, and the
shortcuts on the Home display.
For locking the panel settings. When the panel settings are locked, nothing
happens even when pressing any panel buttons.
For calling up the Demo display.
For editing the preset Voices to create your own Voices. The display differs
depending on whether an Organ Flutes Voice or another kind of Voice is selected.
For creating a Style by editing the preset Style, or by recording Style channels one
by one.
For recording your performance. (This is same as the [RECORDING] button on the
panel.)
For creating a Multi Pad by editing an existing preset Multi Pad, or by recording a
new one.
Determines the detailed settings of the keyboard parts, such as the pitch for each
part, and Voice Set filter.
For making Style playback related settings such as OTS Link timing, Dynamics
Control, etc.
For making Song playback related settings such as Guide function, Channel
settings, etc.
Indicates how to play chords that correspond to the specified chord names.
For setting the scale type.
For fine-tuning the pitch of the entire instrument.
For transposing the pitch of the entire sound in semitones, or just the sound of the
keyboard or MIDI Song.
Determines the Touch Response of the keyboard and Joystick-related settings.
For installing Expansion Packs for adding extra contents downloaded from the
website or created on your own by using the Yamaha Expansion Manager.
For making MIDI-related settings.
For making global settings, managing the USB flash drives, initializing the
instrument to the factory default, or backing up the data stored in the instrument,
etc.
For making settings for connecting the instrument to a Bluetooth-equipped device.
For making settings of the time shown on the display.
For making settings for connecting the instrument to a smart device such as iPad
via the wireless LAN function.
*1 This icon appears only when the Bluetooth function is included.
*2 This icon appears only when the optional USB Wireless LAN adaptor is connected.
112
PSR-SX900/SX700 Owner’s Manual
Pages
Reference
Manual
57, 94

37
-
32
-
-

-

84

-

-

-

-

-



55

-

-

-

95

104
-

-

Appendix
Direct Access Chart
Press the [DIRECT ACCESS] button, then press one of the buttons (or move the appropriate knob, joystick or pedal) listed
below to call up the desired display.
HARMONY/ARPEGGIO
SUSTAIN
PART SELECT LEFT,
RIGHT1–3
Menu
Menu
Menu
Menu
Menu
Display called up with the Direct Access Function
Keyboard/Joystick
Keyboard
Keyboard/Joystick
Joystick
Keyboard/Joystick
Joystick
Assignable
-
Split Point & Fingering
-
-
Style Setting
Setting
EQ
-
Chorus/Reverb
Multi Pad
Mixer
Style Setting
Style Setting
Split Point & Fingering
Style Setting
Pan/Volume
Compressor
EQ
Change Behavior
Setting
Setting
-
Mixer
-
-
Song Setting
Guide
-
Score
Lyrics
Text Viewer
-
-
Song Setting
Part Ch
Lyrics
Play
-
Menu
Live Control
-
-
Menu
Menu
Transpose
Tempo
Metronome
Metronome
Channel On/Off
Metronome
Tap Tempo
-
-
Menu
Chord Looper
-
-
Menu
Menu
Assignable
Assignable
-
-
Mic Setting Selection
-
-
-
Menu
Playlist Selection
Home
Menu
Utility
Scale Tune
-
-
Mixer
-
-
Voice Part Setup
Expansion
Keyboard Harmony/
Arpeggio
Voice Edit
-
-
-
-
Common
Page 2
Voice Setting
Voice Set Filter
-
Menu
Menu
Menu
Menu
Master
PSR-SX900/SX700 Owner’s Manual
Direct Access Chart
Control
MODULATION HOLD
JOYSTICK X
JOYSTICK
JOYSTICK Y
ROTARY SP/ASSIGNABLE
ACMP
AUTO FILL IN
OTS LINK
INTRO 1, 2
INTRO 3, MAIN
VARIATION A
MAIN VARIATION B, C
STYLE CONTROL
MAIN VARIATION D
BREAK
ENDING 1–3
SYNC STOP
SYNC START
START/STOP
STYLE category
STYLE
selection buttons
PLAYER
SONG
RECORDING
(PLAY/PAUSE)
(PREV)
MIDI SONG
(NEXT)
(PLAY/PAUSE)
(PREV)
AUDIO SONG
(NEXT)
1, 2
LIVE CONTROL
ASSIGN
TRANSPOSE
TRANSPOSE -, +
TEMPO TEMPO +
TIMING
RESET/TAP TEMPO
MIXER/EQ
REC/STOP
CHORD LOOPER
(PSR-SX900)
ON/OFF
DIRECT ACCESS
ASSIGNABLE
A–F
FOOT PEDAL
1, 2
MIC SETTING/VOCAL HARMONY (PSR-SX900)
MIC SETTING (PSR-SX700)
MENU
PLAYLIST
DIAL
DEC
INC
EXIT
ENTER
VOICE category
selection buttons
other than [PERC&
DRUMS] and
[EXPANSION/USER]
PERC & DRUMS
VOICE
EXPANSION/USER
113
Control
PART ON/OFF LEFT
PART ON/OFF RIGHT1
VOICE
PART ON/OFF RIGHT2
PART ON/OFF RIGHT3
LEFT HOLD
REGIST BANK -, +
FREEZE
REGISTRATION
MEMORY
MEMORY
1–4
5–8
ONE TOUCH SETTING 1–4
MULTI PAD SELECT
1–4
MULTI PAD
STOP
UPPER OCTAVE
UPPER OCTAVE -, +
114
Display called up with the Direct Access Function
Menu
Voice Edit
-
Split Point & Fingering
Regist Bank Edit
Registration Freeze
Registration Sequence
Left
Right 1
Right 2
Right 3
-
(Registration Bank
Selection)
Regist Bank Information
(Style Selection)
Style Information
Voice
Style
-
Multi Pad Edit
-
-
Audio Link Multi Pad
Voice Setting
Tune
-
(Registration Bank
Selection)
Menu
(Multi Pad Selection)
Menu
PSR-SX900/SX700 Owner’s Manual
-
Troubleshooting
Overall
A click or pop is heard when the power is
turned on or off.
This is normal. Electrical current is being applied to the instrument.
The power is automatically turned off.
This is normal and due to the Auto Power Off function. If necessary, set the parameter of
the Auto Power Off function (page 21).
Noise is heard from the instrument.
Noise may be heard if a mobile phone is used near the instrument or if the phone is ringing. Turn off the mobile phone, or use it further away from the instrument.
Noise is heard from the instrument’s speakers or headphones when using the instrument with an iPhone/iPad app.
When you use the instrument along with an iPhone/iPad app, we recommend that you set
“Airplane Mode” to “ON” on your iPhone/iPad in order to avoid noise caused by communication.
In the LCD, there are some specific points
that are always lit or unlit.
These are the result of defective pixels and occasionally occur in TFT-LCDs; they do not
indicate a problem in operation.
There is a slight difference in sound quality
among different notes played on the keyboard.
This is normal and is a result of the instrument’s sampling system.
Some Voices have a looping sound.
Some noise or vibrato is noticeable at higher
pitches, depending upon the Voice.
The overall volume is too low, or, no sound is
heard.
The master volume may be set too low. Set it to an appropriate level with the [MASTER
VOLUME] dial.
All keyboard parts are set to off. Use the PART ON/OFF [RIGHT 1]/[RIGHT 2]/[RIGHT 3]/
[LEFT] button to turn it on (page 44).
The volume of individual parts may be set too low. Raise the volume in the Mixer display
(page 80).
Make sure the desired channel is set to on in the Mixer display (page 82).
Headphones are connected, disabling the speaker output. Unplug the headphones.
Connect the footswitch to the appropriate jack.
The sound is distorted or noisy.
Troubleshooting
Make sure that the Speaker setting is set to “On” or “Headphone switch”: [MENU]  [Utility]
The volume may be turned up too high. Make sure all relevant volume settings are appropriate.
This may be caused by certain effects or filter resonance settings. Check the effect or filter
settings and change them accordingly in the Mixer display, referring to the Reference Manual on the website.
Sound from the speaker is occasionally interrupted.
The sound level is too high, so the speaker protection function is activated and the sound
stops. Set the sound to an appropriate level by turning down the [MASTER VOLUME] dial.
Not all simultaneously played notes sound.
You are probably exceeding the maximum polyphony of the instrument. When the maximum polyphony is exceeded, the least important notes (such as soft notes and notes currently decaying) will stop sounding first.
The keyboard volume is lower than the Style/
Song playback volume.
The volume of the keyboard parts may be set too low. Raise the volume in the Mixer display (page 80).
The Main display does not appear even
when turning the power on.
This may occur if a USB flash drive has been installed to the instrument. Installation of
some USB flash drive may result a long interval between turning the power on and
appearance of the Home display. To avoid this, turn the power on after disconnecting the
device.
Some characters of the file/folder name are
garbled.
The language settings have been changed. Set the appropriate language for the file/ folder
names (page 21).
An existing file is not shown.
The file extension (.MID, etc.) may have been changed or deleted. Manually rename the
file, adding the appropriate extension, on a computer.
Data files with names of more than 50 characters cannot be handled by the instrument.
Rename the file, reducing the number of characters to 50 or less.
PSR-SX900/SX700 Owner’s Manual
115
Style
The Style does not start even when the
[START/STOP] button is pressed.
The Rhythm channel of the selected Style may not contain any data. Turn the [ACMP] button on and play the left-hand section on the keyboard to sound the accompaniment part of
the Style.
Only the rhythm channel plays.
Make sure the Auto Accompaniment function is turned on; press the [ACMP] button.
Make sure to play keys in the chord section of the keyboard. (pages 45, 47)
Styles in a USB flash drive cannot be
selected.
If the size of the Style data is large (about 120 KB or greater), the Style cannot be selected
because the data is too large to be read by the instrument.
Style playback seems to “skip” when the keyboard is played.
You are probably exceeding the maximum polyphony of the instrument. The instrument
can play up to 128 notes at the same time—including RIGHT 1/RIGHT 2/RIGHT 3/ LEFT
Voices, Style, Song, and Multi Pad notes. When the maximum polyphony is exceeded, the
least important notes (such as soft notes and notes currently decaying) will stop sounding
first.
Style does not change even when a different
chord is played, or the chord is not recognized.
Make sure to play notes on the chord section of the keyboard. (pages 45, 47)
Voice
The Voice selected from the Voice Selection
display does not sound.
Check whether the selected part is turned on or not (page 44).
A strange “flanging” or “doubling” sound
occurs. The sound is slightly different each
time the keys are played.
The RIGHT 1 and RIGHT 2 parts are set to “ON,” and both parts are set to play the same
Voice. Turn off the RIGHT 2 part or change the Voice of one of the parts.
The sound is slightly different each time the
keys are played.
If you are routing the MIDI OUT on the instrument to a sequencer and back to the MIDI IN,
you may need to set Local Control setting to “off” in the System page of the MIDI display
(refer to the Reference Manual on the website).
Some Voices will jump an octave in pitch
when played in the upper or lower registers.
This is normal. Some voices have a pitch limit which, when reached, causes this type of
pitch shift.
Song
MIDI Songs cannot be selected.
If the size of the Song data is large (about 3 MB or greater), the Song cannot be selected
because the data is too large to be read by the instrument.
MIDI Songs cannot be played back during MIDI recording operation. Stop MIDI Recording
when you want to play back a MIDI Song.
Audio Songs cannot be selected.
The file format may not be compatible with the instrument. Compatible formats are: MP3
and WAV. DRM protected files cannot be played back.
Song playback does not start.
The Song has been stopped at the end of the Song data. Return to the beginning of the
Song by pressing the SONG [
] (PREV) button of corresponding Song type (MIDI or
AUDIO).
(MIDI)
This happens when playing back music data for which a specific, fixed tempo is set.
The measure number is different from that of
the score in the Song Position display, shown
by pressing and holding the [|<<] (PREV) or
[>>|] (NEXT) button.
(MIDI)
When playing back a Song, some channels
do not play.
(MIDI)
The tempo, beat, measure and music notation are not displayed correctly.
(MIDI)
When viewing the lyrics on the Score display,
some lyrics are omitted and cannot be seen.
(Audio)
Recorded file is played back at a different volume compared to when it was recorded.
In the Audio Recording function, an error
message appears and audio cannot be
recorded to the internal User drive.
116
Playback of these channels may be set to off. Turn playback on for those channels that are
set to off (page 82).
Some Song data for the instrument has been recorded with special “free tempo” settings.
For such Song data, the tempo, beat, measure and music notation will not be displayed
correctly.
There is not enough space to show the lyrics. Change the size of the Score to other than
“Medium” via the View Setting (page 77).
The audio playback volume has been changed. Setting the volume value to 90 plays back
the file at the same volume as when it was recorded (page 80).
The data on the User drive is fragmented and cannot be used as is. Since there is no
defragmentation function in the Audio Recording, the drive can only be defragmented by
formatting it. To do this, first back up the data by using the data backup function (page 99),
then format the drive, and finally restore the backup data. Performing this backup/restore
operation effectively defragments the drive, allowing you to use it again.
PSR-SX900/SX700 Owner’s Manual
In the Audio Recording function, an error
message appears and audio cannot be
recorded to the USB flash drive.
Make sure to use a compatible USB flash drive.
The USB flash drive may not have enough free space. Check the available space on the
display called up via [MENU]  [Utility]  [Storage]. (page 108)
If you are using a USB flash drive to which data has already been recorded, check first that
no important data remains on the drive, then format it (page 108) and try recording again.
Mixer
The sound seems strange or different than
expected when changing a rhythm Voice
(drum kit, etc.) of the Style or Song from the
Mixer.
When changing the rhythm/percussion Voices (drum kits, etc.) of the Style and Song from
the VOICE parameter, the detailed settings related to the drum voice are reset, and in
some cases you may be unable to restore the original sound. You can restore the original
sound by selecting the same Style or Song again.
Microphone/Vocal Harmony, Guitar
The microphone or guitar input signal cannot
be recorded.
The microphone or guitar input signal cannot be recorded by MIDI recording. Record by
using Audio recording (page 85).
(PSR-SX900) Harmony can be heard in
addition to the microphone sound.
Vocal Harmony is set to on. Turn Vocal Harmony off (page 50).
(PSR-SX900) The Vocal Harmony effect
sounds distorted or out-of-tune.
Your vocal microphone may be picking up extraneous sounds, such as the Style sound
from the instrument. In particular, bass sounds can cause mistracking of the Vocal Harmony. To remedy this:
• Sing as closely to the microphone as possible.
• Use a directional microphone.
• Turn down the Master volume, Style volume, or Song volume control (pages 20, 80).
(PSR-SX900) The Vocal Harmony effect is
not applied even when it is turned on.
In the Chordal mode, Vocal Harmony is added only when chords are detected. Try one of
the following:
• Turn on the [ACMP ON/OFF] button and play chords in the chord section during Style
playback.
• Turn on the Left part and play chords in the left hand section.
• Play back a Song which contains chords.
• Set the “Stop ACMP” parameter to something other than “Disabled” via [MENU]  [Style
Setting]  [Setting]. For details, refer to the Reference Manual on the website.
FOOT PEDAL jacks
The on/off setting of the footswitch connected
to the ASSIGNABLE FOOT PEDAL jack is
reversed.
Turn the instrument’s power off, then turn it on again making sure not to press the footswitch.
Troubleshooting
Connections
Sound input to the AUX IN jacks is interrupted.
The output volume of the external device connected to this instrument is too low. Increase
the output volume of the external device. The volume level reproduced via this instrument
can be adjusted by using the [MASTER VOLUME] dial.
The Wireless LAN and Time icons are not
shown in the Menu display even though the
USB wireless LAN adaptor is connected.
Disconnect the USB wireless LAN adaptor and connect it again.
The Bluetooth-equipped device cannot be
paired with nor connected to the instrument.
Check that the Bluetooth function of the Bluetooth-equipped device is activated. To connect the Bluetooth-equipped device and the instrument, Bluetooth function of both devices
need to be turned on.
The Bluetooth-equipped device and the instrument need to be paired to connect each
other via Bluetooth (page 104).
In case there is a device (microwave oven, wireless LAN device, etc.) that outputs signals
in the 2.4 GHz frequency band nearby, move this instrument away from the device that is
emitting radio-frequency signals.
PSR-SX900/SX700 Owner’s Manual
117
Specifications
Product Name
Size/Weight
Dimensions (W x D x H)
Control
Interface
Weight
Keyboard
Other Controllers
Display
Voices
Panel
Tone Generation
Polyphony
Preset
Number of Keys
Type
Touch Response
Joystick
Knobs
Type
Size
Touch Screen
Language
Language
Tone Generation
Technology
Number of Voices
Featured Voices
Compatibility
Effects
Keyboard Part
Types
Reverb
Chorus
Variation Effect
Insertion Effect
Master Compressor
Master EQ
Part EQ
Others
Vocal Harmony
PSR-SX900
Digital Keyboard
1,017 mm x 431 mm x 139 mm
(40-1/16” x 17” x 5-1/2”)
11.5 kg (25 lb, 6 oz)
61
Organ (FSB), Initial Touch
Normal, Soft1, Soft2, Hard1, Hard2
Yes
2 (Assignable)
TFT Color Wide VGA LCD
800 x 480 dots
7 inch
Yes
English, German, French, Spanish, Italian
English
AWM Stereo Sampling
PSR-SX700
Digital Keyboard
1,017 mm x 431 mm x 139 mm
(40-1/16” x 17” x 5-1/2”)
11.5 kg (25 lb, 6 oz)
61
Organ (FSB), Initial Touch
Normal, Soft1, Soft2, Hard1, Hard2
Yes
2 (Assignable)
TFT Color Wide VGA LCD
800 x 480 dots
7 inch
Yes
English, German, French, Spanish, Italian
English
AWM Stereo Sampling
128 (max.)
1337 Voices + 56 Drum/SFX Kits +
480 XG Voices
252 S.Art!, 54 MegaVoice, 31 Sweet!,
87 Cool!, 131 Live!, 24 OrganFlutes
XG (for Song playback),
GS (for Song playback), GM, GM2
Right 1, Right 2, Right 3, Left
59 Preset + 30 User
106 Preset + 30 User
322 Preset (with VCM) + 30 User
1–8: 322 Preset (with VCM) + 30 User
5 Preset + 30 User
5 Preset + 30 User
28 Parts
Mic/Guitar Effects: Noise Gate, Compressor,
3 Band EQ
Vocal Effect: 23
54 Preset + 60 User (*)
128 (max.)
986 Voices + 41 Drum/SFX Kits +
480 XG Voices
131 S.Art!, 30 MegaVoice, 31 Sweet!,
74 Cool!, 89 Live!, 24 OrganFlutes
XG (for Song playback),
GS (for Song playback), GM, GM2
Right 1, Right 2, Right 3, Left
59 Preset + 30 User
106 Preset + 30 User
322 Preset + 30 User
1–5: 322 Preset + 30 User
5 Preset + 30 User
5 Preset + 30 User
28 Parts
Mic/Guitar Effects: Noise Gate, Compressor,
3 Band EQ
-
* The number is the total of Vocal Harmony and
Synth Vocoder
Synth Vocoder
20 Preset + 60 User (*)
-
* The number is the total of Vocal Harmony and
Synth Vocoder
Styles
Preset
Number of Styles
Featured Styles
Fingering
Style Control
Other Features
One Touch Setting (OTS)
Chord Looper
Style Section Reset
Compatibility
Expandability
Songs (MIDI)
Expansion Voice
Expansion Style
Expansion Audio Style
Preset
Number of Preset Songs
Recording
Number of Tracks
Data Capacity
Function
Format
Songs
(Audio)
Recording
Format
Playback
Recording
Data Capacity
Playback
Recording
Multi Pads
118
Time Stretch
Pitch Shift
Vocal Cancel
Number of Multi Pad Banks
Audio Link
PSR-SX900/SX700 Owner’s Manual
525
463 Pro, 46 Session, 6 Free Play, 10 DJ
Single Finger, Fingered, Fingered On Bass,
Multi Finger, AI Fingered, Full Keyboard,
AI Full Keyboard
INTRO x 3, MAIN VARIATION x 4, FILL x 4,
BREAK, ENDING x 3
4 for each Style
Yes
Yes
Style File Format (SFF),
Style File Format GE (SFF GE)
Yes (approx. 1 GB)
Yes (Internal Memory)
Yes (Internal Memory)
5 preset sample Songs
16
approx. 3 MB/Song
Quick Recording, Multi Track Recording,
Step Recording
SMF (Format 0 & 1), XF
SMF (Format 0)
approx. 0.8 GB (80 minutes) per Song
WAV (44.1 kHz, 16 bit, stereo),
MP3 (44.1/48.0 kHz, 64–320 kbps and VBR,
mono/stereo)
WAV (44.1 kHz, 16 bit, stereo),
MP3 (44.1 kHz, 128/256/320 kbps, stereo)
Yes
Yes
Yes
329 banks x 4 Pads
Yes
400
353 Pro, 34 Session, 3 Free Play, 10 DJ
Single Finger, Fingered, Fingered On Bass,
Multi Finger, AI Fingered, Full Keyboard,
AI Full Keyboard
INTRO x 3, MAIN VARIATION x 4, FILL x 4,
BREAK, ENDING x 3
4 for each Style
Yes
Style File Format (SFF),
Style File Format GE (SFF GE)
Yes (approx. 400 MB)
Yes (Internal Memory)
5 preset sample Songs
16
approx. 3 MB/Song
Quick Recording, Multi Track Recording,
Step Recording
SMF (Format 0 & 1), XF
SMF (Format 0)
approx. 0.8 GB (80 minutes) per Song
WAV (44.1 kHz, 16 bit, stereo),
MP3 (44.1/48.0 kHz, 64–320 kbps and VBR,
mono/stereo)
WAV (44.1 kHz, 16 bit, stereo),
MP3 (44.1 kHz, 128/256/320 kbps, stereo)
Yes
Yes
Yes
226 banks x 4 Pads
Yes
Functions
Voices
Styles
Songs
Multi Pads
Registration
Memory
Playlist
Search
Demo
Overall Controls
Bluetooth
(May not have this
functionality
depending on the
country in which you
purchased the
product.)
Miscellaneous
Others
Storage and
Connectivity
Storage
Connectivity
Harmony
Arpeggio
Panel Sustain
Mono/Poly
Style Creator
OTS Information
Score Display Function
Lyrics Display Function
Guide
Multi Pad Creator
Number of Buttons
Control
Number of Records
Metronome
Tempo Range
Transpose
Tuning
Octave Button
Scale Type
Sub Scale Setting
Bluetooth version
Supported profile
Compatible codec
Wireless output
Maximum communication
distance
Radio Frequency
(Operational Frequency)
Maximum output power
(EIRP)
Type of modulation
Direct Access
Text Display Function
Wallpaper Customization
Display output to an
external monitor
FOOT PEDAL
USB TO DEVICE
USB TO HOST
Sound
System
Amplifiers
Speakers
Power
AC Adaptor
Supply
Power Consumption
Auto Power Off
Included Accessories
Separately Sold Accessories
(May not be available depending on your area.)
PSR-SX700
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Follow Lights, Any Key, Karao-Key, Your Tempo
Yes
8
Registration Sequence, Freeze
2,500 (max.) Records per Playlist file
Yes
Yes
Yes
5 – 500, Tap Tempo
-12 – 0 – +12
414.8 – 440 – 466.8 Hz
Yes
9 types
Yes
-
2402–2480 MHz
-
+4 dBm
-
GFSK, π/4 DQPSK, 8DPSK
Yes
Yes
Yes
Yes (by using a commercially USB display adaptor)
Yes
Yes
Yes
-
* For a list of compatible devices, access the
“Yamaha Downloads” website.
Yes (approx. 4 GB)
Yes (approx. 1 GB)
USB flash drive
16 V
Standard stereo phone jack
Yes
IN, OUT
Stereo mini jack
MAIN OUTPUT (L/L+R, R),
SUB (AUX) OUTPUT (1,2 (L/L+R, R))
1 (SUSTAIN), 2 (ARTICULATION 1),
Function assignable
Yes (x 2)
Yes
(15 W + 10 W) x 2
13 cm x 2 + 2.5 cm (dome) x 2
PA-300C or an equivalent recommended by Yamaha
24 W
Yes
Owner’s Manual (this book)
Music rest
AC adaptor* (PA-300C or an equivalent
recommended by Yamaha)
USB flash drive
16 V
Standard stereo phone jack
Yes
IN, OUT
Stereo mini jack
MAIN OUTPUT (L/L+R, R)
1 (SUSTAIN), 2 (ARTICULATION 1),
Function assignable
Yes
Yes
15 W x 2
13 cm x 2 + 5 cm x 2
PA-300C or an equivalent recommended by Yamaha
21 W
Yes
Owner’s Manual (this book)
Music rest
AC adaptor* (PA-300C or an equivalent
recommended by Yamaha)
* May not be included depending on your area.
Check with your Yamaha dealer.
* May not be included depending on your area.
Check with your Yamaha dealer.
AC adaptor: PA-300C or an equivalent
recommended by Yamaha
Headphones: HPH-50, HPH-100, HPH-150
Footswitch: FC4A, FC5
Foot controller: FC7
USB wireless LAN adaptor: UD-WL01
Wireless MIDI adaptor: UD-BT01, MD-BT01
Subwoofer: KS-SW100
Keyboard stand: L-6, L-7B
AC adaptor: PA-300C or an equivalent
recommended by Yamaha
Headphones: HPH-50, HPH-100, HPH-150
Footswitch: FC4A, FC5
Foot controller: FC7
USB wireless LAN adaptor: UD-WL01
Wireless MIDI adaptor: UD-BT01, MD-BT01
Subwoofer: KS-SW100
Keyboard stand: L-6, L-7B
(The exterior size of the PSR-SX900/SX700 is
beyond the limits as described in the L-6 Assembly
Instructions. However, we have determined through
tests that the stand can be safely used for the
instrument.)
(The exterior size of the PSR-SX900/SX700 is
beyond the limits as described in the L-6 Assembly
Instructions. However, we have determined through
tests that the stand can be safely used for the
instrument.)
Specifications
Internal Memory (USER
Drive)
External Drives
DC IN
Headphones
Microphone/Guitar
MIDI
AUX IN
LINE OUT
PSR-SX900
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Follow Lights, Any Key, Karao-Key, Your Tempo
Yes
8
Registration Sequence, Freeze
2,500 (max.) Records per Playlist file
Yes
Yes
Yes
5 – 500, Tap Tempo
-12 – 0 – +12
414.8 – 440 – 466.8 Hz
Yes
9 types
Yes
4.1
A2DP
SBC
Bluetooth class 2
about 10 m
* The contents of this manual apply to the latest specifications as of the publishing date. To obtain the latest manual, access the Yamaha website then download the manual
file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer.
PSR-SX900/SX700 Owner’s Manual
119
Index
A
A-B Repeat ......................................74
AC adaptor.......................................20
Accessories .......................................8
Accompaniment ...............................40
Action (Playlist) ................................91
AI Full Keyboard ..............................42
Arpeggio ..........................................51
ASSIGNABLE ............................57, 94
Audio Link Multi Pad ........................53
Audio Phraser ..................................11
Audio Song ......................................66
Auto Power Off ................................21
AUX IN ...........................................103
B
Backup .............................................99
Bluetooth................................104, 105
Break (Style) ....................................59
Button Lamps.............................22, 23
C
Channel (Style, MIDI Song) .............82
Character Entry................................36
Chord Cancel ...................................42
Chord Detection Area ......................47
Chord Fingering type .......................42
Chord Looper ...................................60
Chord Match ....................................64
Chordal ............................................70
Chorus .............................................81
Close................................................29
Compressor .....................................96
Computer .................................11, 110
Computer-related Operations ......9, 11
Connection.....................................100
Copy ................................................34
D
Data Dial ..........................................31
Data List.............................................9
Delete ..............................................35
Demo ...............................................32
Direct Access ...........................32, 113
DJ Style ...........................................41
Drums/SFX Voice ............................48
E
Effect................................................81
Ending (Style) ..................................58
EQ (for each part) ............................81
EQ (Master EQ) ...............................96
120
Expansion Packs............................. 97
External Monitor ............................ 109
F
Factory Reset.................................. 98
Fade In/Out ..................................... 59
Fast Forward ................................... 72
Favorite ..................................... 28, 35
File ............................................ 28, 33
File Selection Display...................... 28
Fill-in (Style) .................................... 59
Filter ................................................ 81
Fingered .......................................... 42
Fingering type ................................. 42
Firmware Version ............................ 98
Folder .............................................. 34
Foot Controller ........................ 57, 106
Footage ........................................... 49
Footswitch ............................... 57, 106
Format........................................... 108
Function ........................................ 111
Left Hold .......................................... 45
LIVE CONTROL knobs.................... 56
Loop Playback ................................. 76
LOWER ........................................... 44
Lyrics ............................................... 78
M
GM .................................................... 7
GS ..................................................... 7
Guitar ...................................... 14, 100
Main (Style) ..................................... 59
Main Display .............................. 22, 23
Manual Bass.................................... 47
Master Compressor ......................... 96
Master EQ ....................................... 96
Menu........................................ 29, 111
Metronome ...................................... 37
Mic ................................................... 14
Mic Setting..................................... 101
Microphone.............................. 79, 100
MIDI ....................................... 108, 110
MIDI Song........................................ 66
Mixer................................................ 80
Modulation ....................................... 62
MODULATION HOLD...................... 62
Move................................................ 34
MP3 ........................................... 67, 84
Multi Pad.............................. 14, 53, 64
Music Notation................................. 77
Music Rest....................................... 18
H
N
Hardware ID .................................... 98
Harmony (Keyboard Harmony) ....... 50
Harmony (Vocal Harmony).............. 70
Headphones.................................... 19
Home Display............................ 23, 26
Next ................................................. 72
G
I
Intro (Style)...................................... 58
iPhone/iPad................................... 108
J
Joystick ........................................... 62
K
Keyboard Harmony ......................... 50
Keyboard Part ........................... 14, 44
Knob Assign Type ........................... 56
L
Language ........................................ 21
Layer ............................................... 44
LEFT ............................................... 44
PSR-SX900/SX700 Owner’s Manual
O
One Touch Setting..................... 43, 54
Organ Flutes Voice.......................... 49
OTS Link.......................................... 59
OUTPUT........................................ 102
Owner name .................................... 21
P
Pan .................................................. 81
Panel Lock....................................... 37
Panel Setup (Panel Settings) .... 18, 38
Parameter Lock ............................... 95
Phrase Mark .................................... 73
Pitch Bend ....................................... 62
Pitch Shift ........................................ 74
Play/Pause ...................................... 72
Playback (Multi Pad)........................ 64
Playback (Song) .............................. 72
Playback (Style)............................... 58
Playlist ................................. 15, 86, 90
Playlist Record........................... 86, 91
Power .............................................. 20
Pre-installed Expansion Contents
List ..................................................9
Preset ..............................................28
Previous ...........................................72
R
Record Name (Playlist) ....................91
Recording ..................................15, 84
Reference Manual .......................9, 10
Regist Bank Edit ..............................89
Regist Bank Info ..............................89
Registration Memory..................15, 86
Registration Memory Bank.........27, 86
Registration Sequence ....................27
Rename ...........................................34
RESET .............................................42
Restore ............................................99
Reverb .............................................81
Rewind .............................................72
RIGHT..............................................44
ROTARY SP/ASSIGNABLE ............57
TRANSPOSE .................................. 55
Troubleshooting ............................ 115
Tuning ............................................. 55
U
UPPER............................................ 44
UPPER OCTAVE ............................ 55
USB display adaptor ............. 107, 109
USB flash drive ..................... 107, 108
USB wireless LAN adaptor.... 107, 108
User................................................. 28
V
Vocal Cancel ................................... 74
Vocal Harmony................................ 70
Vocoder........................................... 70
Vocoder-mono................................. 70
Voice ................................... 14, 48, 83
Volume (for each part) .................... 81
Volume (Master volume) ................. 20
S
W
S.Art (Super Articulation) Voice
...............................................48, 63
Save.................................................33
Score ...............................................77
Search .............................................35
Section .............................................59
SFF (Style File Format)................7, 41
Shortcut .....................................27, 94
Smart Device Connection Manual
for iOS ......................................9, 11
Song ....................................14, 66, 72
Song File Compatibility ....................67
Song List ........................14, 67, 69, 72
Song Player ...................14, 67, 68, 72
Song Position...................................73
Song Position Marker ................73, 75
Specifications.................................118
Split ..................................................44
Split Point...................................44, 45
Style .....................................14, 40, 58
Style Section Reset ...................42, 59
Sustain .............................................62
Synchro Start (MIDI Song)...............73
Synchro Start (Multi Pad).................65
Synchro Start (Style)........................58
Synchro Stop (Style) ........................58
Synth Vocoder .................................71
WAV .......................................... 67, 84
Website ............................................. 9
X
XF...................................................... 7
XG ..................................................... 7
Y
Yamaha Expansion Manager.... 11, 97
Index
T
Talk ..................................................79
TAP TEMPO ....................................42
TEMPO ............................................42
Text ..................................................78
Time Stretch ....................................74
Touch Screen ..................................30
PSR-SX900/SX700 Owner’s Manual
121
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
2.
The licenses for most software are designed to take away your freedom to
share and change it. By contrast, the GNU General Public License is
intended to guarantee your freedom to share and change free software—to
make sure the software is free for all its users. This General Public License
applies to most of the Free Software Foundation’s software and to any other
program whose authors commit to using it. (Some other Free Software
Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
a) You must cause the modified files to carry prominent notices stating
that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole
or in part contains or is derived from the Program or any part thereof,
to be licensed as a whole at no charge to all third parties under the
terms of this License.
When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the
freedom to distribute copies of free software (and charge for this service if
you wish), that you receive source code or can get it if you want it, that you
can change the software or use pieces of it in new free programs; and that
you know you can do these things.
c) If the modified program normally reads commands interactively when
run, you must cause it, when started running for such interactive use
in the most ordinary way, to print or display an announcement
including an appropriate copyright notice and a notice that there is no
warranty (or else, saying that you provide a warranty) and that users
may redistribute the program under these conditions, and telling the
user how to view a copy of this License. (Exception: if the Program
itself is interactive but does not normally print such an
announcement, your work based on the Program is not required to
print an announcement.)
To protect your rights, we need to make restrictions that forbid anyone to
deny you these rights or to ask you to surrender the rights. These restrictions
translate to certain responsibilities for you if you distribute copies of the
software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for
a fee, you must give the recipients all the rights that you have. You must
make sure that they, too, receive or can get the source code. And you must
show them these terms so they know their rights.
These requirements apply to the modified work as a whole. If identifiable
sections of that work are not derived from the Program, and can be
reasonably considered independent and separate works in themselves,
then this License, and its terms, do not apply to those sections when you
distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the
distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to
each and every part regardless of who wrote it.
We protect your rights with two steps: (1) copyright the software, and (2) offer
you this license which gives you legal permission to copy, distribute and/or
modify the software.
Also, for each author's protection and ours, we want to make certain that
everyone understands that there is no warranty for this free software. If the
software is modified by someone else and passed on, we want its recipients
to know that what they have is not the original, so that any problems
introduced by others will not reflect on the original authors’ reputations.
Thus, it is not the intent of this section to claim rights or contest your
rights to work written entirely by you; rather, the intent is to exercise the
right to control the distribution of derivative or collective works based on
the Program.
Finally, any free program is threatened constantly by software patents. We
wish to avoid the danger that redistributors of a free program will individually
obtain patent licenses, in effect making the program proprietary. To prevent
this, we have made it clear that any patent must be licensed for everyone’s
free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification
follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0.
This License applies to any program or other work which contains a
notice placed by the copyright holder saying it may be distributed under
the terms of this General Public License. The “Program”, below, refers to
any such program or work, and a “work based on the Program” means
either the Program or any derivative work under copyright law: that is to
say, a work containing the Program or a portion of it, either verbatim or
with modifications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term “modification”.) Each
licensee is addressed as “you”.
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of running
the Program is not restricted, and the output from the Program is covered
only if its contents constitute a work based on the Program (independent
of having been made by running the Program). Whether that is true
depends on what the Program does.
1.
You may copy and distribute verbatim copies of the Program’s source
code as you receive it, in any medium, provided that you conspicuously
and appropriately publish on each copy an appropriate copyright notice
and disclaimer of warranty; keep intact all the notices that refer to this
License and to the absence of any warranty; and give any other
recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you
may at your option offer warranty protection in exchange for a fee.
122
PSR-SX900/SX700 Owner’s Manual
You may modify your copy or copies of the Program or any portion of it,
thus forming a work based on the Program, and copy and distribute such
modifications or work under the terms of Section 1 above, provided that
you also meet all of these conditions:
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under the
scope of this License.
3.
You may copy and distribute the Program (or a work based on it, under
Section 2) in object code or executable form under the terms of Sections
1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine- readable
source code, which must be distributed under the terms of Sections 1
and 2 above on a medium customarily used for software interchange;
or,
b) Accompany it with a written offer, valid for at least three years, to give
any third party, for a charge no more than your cost of physically
performing source distribution, a complete machine- readable copy of
the corresponding source code, to be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software
interchange; or,
c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed only
for noncommercial distribution and only if you received the program in
object code or executable form with such an offer, in accord with
Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to control
compilation and installation of the executable. However, as a special
exception, the source code distributed need not include anything that is
normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on
which the executable runs, unless that component itself accompanies
the executable.
If distribution of executable or object code is made by offering access to
copy from a designated place, then offering equivalent access to copy
the source code from the same place counts as distribution of the
source code, even though third parties are not compelled to copy the
source along with the object code.
4.
You may not copy, modify, sublicense, or distribute the Program except
as expressly provided under this License. Any attempt otherwise to
copy, modify, sublicense or distribute the Program is void, and will
automatically terminate your rights under this License. However, parties
who have received copies, or rights, from you under this License will not
have their licenses terminated so long as such parties remain in full
compliance.
5.
You are not required to accept this License, since you have not signed it.
However, nothing else grants you permission to modify or distribute the
Program or its derivative works. These actions are prohibited by law if
you do not accept this License. Therefore, by modifying or distributing
the Program (or any work based on the Program), you indicate your
acceptance of this License to do so, and all its terms and conditions for
copying, distributing or modifying the Program or works based on it.
6.
Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the original
licensor to copy, distribute or modify the Program subject to these terms
and conditions. You may not impose any further restrictions on the
recipients’ exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
7.
If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot distribute
so as to satisfy simultaneously your obligations under this License and
any other pertinent obligations, then as a consequence you may not
distribute the Program at all. For example, if a patent license would not
permit royalty-free redistribution of the Program by all those who receive
copies directly or indirectly through you, then the only way you could
satisfy both it and this License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid or unenforceable under any
particular circumstance, the balance of the section is intended to apply
and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents
or other property right claims or to contest validity of any such claims;
this section has the sole purpose of protecting the integrity of the free
software distribution system, which is implemented by public license
practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on
consistent application of that system; it is up to the author/donor to
decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be
a consequence of the rest of this License.
8.
9.
If the distribution and/or use of the Program is restricted in certain
countries either by patents or by copyrighted interfaces, the original
copyright holder who places the Program under this License may add an
explicit geographical distribution limitation excluding those countries, so
that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if
written in the body of this License.
The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and “any
later version”, you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number
of this License, you may choose any version ever published by the Free
Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs
whose distribution conditions are different, write to the author to ask for
permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make
exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of
promoting the sharing and reuse of software generally.
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF
THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE
OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New
Programs
If you develop a new program, and you want it to be of the greatest possible
use to the public, the best way to achieve this is to make it free software
which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach
them to the start of each source file to most effectively convey the exclusion
of warranty; and each file should have at least the “copyright” line and a
pointer to where the full notice is found.
<one line to give the program’s name and a brief idea of what it does.>
Copyright © <year> <name of author>
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it
starts in an interactive mode:
Gnomovision version 69, Copyright © year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
type ‘show w’. This is free software, and you are welcome to redistribute
it under certain conditions; type ‘show c’ for details.
The hypothetical commands ‘show w’ and ‘show c’ should show the
appropriate parts of the General Public License. Of course, the commands
you use may be called something other than ‘show w’ and ‘show c’; they
could even be mouse-clicks or menu items—whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a “copyright disclaimer” for the program, if necessary.
Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
‘Gnomovision’ (which makes passes at compilers) written by James
Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Lesser General Public
License instead of this License.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
PSR-SX900/SX700 Owner’s Manual
123
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright © 1991, 1999 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL.
It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to
share and change it. By contrast, the GNU General Public Licenses are
intended to guarantee your freedom to share and change free software— to
make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially
designated software packages—typically libraries—of the Free Software
Foundation and other authors who decide to use it. You can use it too, but we
suggest you first think carefully about whether this license or the ordinary
General Public License is the better strategy to use in any particular case,
based on the explanations below.
When we speak of free software, we are referring to freedom of use, not
price. Our General Public Licenses are designed to make sure that you have
the freedom to distribute copies of free software (and charge for this service if
you wish); that you receive source code or can get it if you want it; that you
can change the software and use pieces of it in new free programs; and that
you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to
deny you these rights or to ask you to surrender these rights. These
restrictions translate to certain responsibilities for you if you distribute copies
of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee,
you must give the recipients all the rights that we gave you. You must make
sure that they, too, receive or can get the source code. If you link other code
with the library, you must provide complete object files to the recipients, so
that they can relink them with the library after making changes to the library
and recompiling it. And you must show them these terms so they know their
rights.
In other cases, permission to use a particular library in non-free programs
enables a greater number of people to use a large body of free software. For
example, permission to use the GNU C Library in non-free programs enables
many more people to use the whole GNU operating system, as well as its
variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’
freedom, it does ensure that the user of a program that is linked with the
Library has the freedom and the wherewithal to run that program using a
modified version of the Library.
The precise terms and conditions for copying, distribution and modification
follow. Pay close attention to the difference between a “work based on the
library” and a “work that uses the library”. The former contains code derived
from the library, whereas the latter must be combined with the library in order
to run.
GNU LESSER GENERAL PUBLIC
LICENSE
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0.
A “library” means a collection of software functions and/or data prepared
so as to be conveniently linked with application programs (which use
some of those functions and data) to form executables.
We protect your rights with a two-step method: (1) we copyright the library,
and (2) we offer you this license, which gives you legal permission to copy,
distribute and/or modify the library.
The “Library”, below, refers to any such software library or work which
has been distributed under these terms. A “work based on the Library”
means either the Library or any derivative work under copyright law: that
is to say, a work containing the Library or a portion of it, either verbatim
or with modifications and/or translated straightforwardly into another
language. (Hereinafter, translation is included without limitation in the
term “modification”.)
To protect each distributor, we want to make it very clear that there is no
warranty for the free library. Also, if the library is modified by someone else
and passed on, the recipients should know that what they have is not the
original version, so that the original author’s reputation will not be affected by
problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free
program. We wish to make sure that a company cannot effectively restrict the
users of a free program by obtaining a restrictive license from a patent holder.
Therefore, we insist that any patent license obtained for a version of the
library must be consistent with the full freedom of use specified in this
license.
“Source code” for a work means the preferred form of the work for
making modifications to it. For a library, complete source code means all
the source code for all modules it contains, plus any associated interface
definition files, plus the scripts used to control compilation and
installation of the library.
Most GNU software, including some libraries, is covered by the ordinary
GNU General Public License. This license, the GNU Lesser General Public
License, applies to certain designated libraries, and is quite different from the
ordinary General Public License. We use this license for certain libraries in
order to permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared
library, the combination of the two is legally speaking a combined work, a
derivative of the original library. The ordinary General Public License
therefore permits such linking only if the entire combination fits its criteria of
freedom. The Lesser General Public License permits more lax criteria for
linking other code with the library.
We call this license the “Lesser” General Public License because it does
Less to protect the user’s freedom than the ordinary General Public License.
It also provides other free software developers Less of an advantage over
competing non-free programs. These disadvantages are the reason we use
the ordinary General Public License for many libraries. However, the Lesser
license provides advantages in certain special circumstances.
For example, on rare occasions, there may be a special need to encourage
the widest possible use of a certain library, so that it becomes a de-facto
standard. To achieve this, non-free programs must be allowed to use the
library. A more frequent case is that a free library does the same job as
widely used non-free libraries. In this case, there is little to gain by limiting the
free library to free software only, so we use the Lesser General Public
License.
This License Agreement applies to any software library or other program
which contains a notice placed by the copyright holder or other
authorized party saying it may be distributed under the terms of this
Lesser General Public License (also called “this License”). Each
licensee is addressed as “you”.
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of running a
program using the Library is not restricted, and output from such a
program is covered only if its contents constitute a work based on the
Library (independent of the use of the Library in a tool for writing it).
Whether that is true depends on what the Library does and what the
program that uses the Library does.
1.
You may copy and distribute verbatim copies of the Library’s complete
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices
that refer to this License and to the absence of any warranty; and
distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you
may at your option offer warranty protection in exchange for a fee.
2.
You may modify your copy or copies of the Library or any portion of it,
thus forming a work based on the Library, and copy and distribute such
modifications or work under the terms of Section 1 above, provided that
you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating
that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no charge to
all third parties under the terms of this License.
124
PSR-SX900/SX700 Owner’s Manual
d) If a facility in the modified Library refers to a function or a table of data
6.
to be supplied by an application program that uses the facility, other
than as an argument passed when the facility is invoked, then you
must make a good faith effort to ensure that, in the event an
application does not supply such function or table, the facility still
operates, and performs whatever part of its purpose remains
meaningful.
You must give prominent notice with each copy of the work that the
Library is used in it and that the Library and its use are covered by this
License. You must supply a copy of this License. If the work during
execution displays copyright notices, you must include the copyright
notice for the Library among them, as well as a reference directing the
user to the copy of this License. Also, you must do one of these things:
(For example, a function in a library to compute square roots has a
purpose that is entirely well-defined independent of the application.
Therefore, Subsection 2d requires that any application-supplied
function or table used by this function must be optional: if the
application does not supply it, the square root function must still
compute square roots.)
a) Accompany the work with the complete corresponding machine-
These requirements apply to the modified work as a whole. If identifiable
sections of that work are not derived from the Library, and can be
reasonably considered independent and separate works in themselves,
then this License, and its terms, do not apply to those sections when you
distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Library, the
distribution of the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and thus to
each and every part regardless of who wrote it.
readable source code for the Library including whatever changes
were used in the work (which must be distributed under Sections 1
and 2 above); and, if the work is an executable linked with the Library,
with the complete machine-readable “work that uses the Library”, as
object code and/or source code, so that the user can modify the
Library and then relink to produce a modified executable containing
the modified Library. (It is understood that the user who changes the
contents of definitions files in the Library will not necessarily be able
to recompile the application to use the modified definitions.)
Thus, it is not the intent of this section to claim rights or contest your
rights to work written entirely by you; rather, the intent is to exercise the
right to control the distribution of derivative or collective works based on
the Library.
b) Use a suitable shared library mechanism for linking with the Library. A
suitable mechanism is one that (1) uses at run time a copy of the
library already present on the user’s computer system, rather than
copying library functions into the executable, and (2) will operate
properly with a modified version of the library, if the user installs one,
as long as the modified version is interface- compatible with the
version that the work was made with.
In addition, mere aggregation of another work not based on the Library
with the Library (or with a work based on the Library) on a volume of a
storage or distribution medium does not bring the other work under the
scope of this License.
3.
c) Accompany the work with a written offer, valid for at least three years,
to give the same user the materials specified in Subsection 6a,
above, for a charge no more than the cost of performing this
distribution.
You may opt to apply the terms of the ordinary GNU General Public
License instead of this License to a given copy of the Library. To do this,
you must alter all the notices that refer to this License, so that they refer
to the ordinary GNU General Public License, version 2, instead of to this
License. (If a newer version than version 2 of the ordinary GNU General
Public License has appeared, then you can specify that version instead if
you wish.) Do not make any other change in these notices.
d) If distribution of the work is made by offering access to copy from a
designated place, offer equivalent access to copy the above specified
materials from the same place.
e) Verify that the user has already received a copy of these materials or
that you have already sent this user a copy.
Once this change is made in a given copy, it is irreversible for that copy,
so the ordinary GNU General Public License applies to all subsequent
copies and derivative works made from that copy.
For an executable, the required form of the “work that uses the Library”
must include any data and utility programs needed for reproducing the
executable from it. However, as a special exception, the materials to be
distributed need not include anything that is normally distributed (in
either source or binary form) with the major components (compiler,
kernel, and so on) of the operating system on which the executable runs,
unless that component itself accompanies the executable.
This option is useful when you wish to copy part of the code of the
Library into a program that is not a library.
4.
You may copy and distribute the Library (or a portion or derivative of it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you accompany it with the
complete corresponding machine-readable source code, which must be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange.
If distribution of object code is made by offering access to copy from a
designated place, then offering equivalent access to copy the source
code from the same place satisfies the requirement to distribute the
source code, even though third parties are not compelled to copy the
source along with the object code.
5.
As an exception to the Sections above, you may also combine or link a
“work that uses the Library” with the Library to produce a work
containing portions of the Library, and distribute that work under terms of
your choice, provided that the terms permit modification of the work for
the customer’s own use and reverse engineering for debugging such
modifications.
It may happen that this requirement contradicts the license restrictions of
other proprietary libraries that do not normally accompany the operating
system. Such a contradiction means you cannot use both them and the
Library together in an executable that you distribute.
7.
A program that contains no derivative of any portion of the Library, but is
designed to work with the Library by being compiled or linked with it, is
called a “work that uses the Library”. Such a work, in isolation, is not a
derivative work of the Library, and therefore falls outside the scope of
this License.
However, linking a “work that uses the Library” with the Library creates
an executable that is a derivative of the Library (because it contains
portions of the Library), rather than a “work that uses the library”. The
executable is therefore covered by this License. Section 6 states terms
for distribution of such executables.
When a “work that uses the Library” uses material from a header file that
is part of the Library, the object code for the work may be a derivative
work of the Library even though the source code is not. Whether this is
true is especially significant if the work can be linked without the Library,
or if the work is itself a library. The threshold for this to be true is not
precisely defined by law.
If such an object file uses only numerical parameters, data structure
layouts and accessors, and small macros and small inline functions (ten
lines or less in length), then the use of the object file is unrestricted,
regardless of whether it is legally a derivative work. (Executables
containing this object code plus portions of the Library will still fall under
Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute
the object code for the work under the terms of Section 6. Any
executables containing that work also fall under Section 6, whether or
not they are linked directly with the Library itself.
You may place library facilities that are a work based on the Library sideby-side in a single library together with other library facilities not covered
by this License, and distribute such a combined library, provided that the
separate distribution of the work based on the Library and of the other
library facilities is otherwise permitted, and provided that you do these
two things:
a) Accompany the combined library with a copy of the same work based
on the Library, uncombined with any other library facilities. This must
be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of
it is a work based on the Library, and explaining where to find the
accompanying uncombined form of the same work.
8.
You may not copy, modify, sublicense, link with, or distribute the Library
except as expressly provided under this License. Any attempt otherwise
to copy, modify, sublicense, link with, or distribute the Library is void, and
will automatically terminate your rights under this License. However,
parties who have received copies, or rights, from you under this License
will not have their licenses terminated so long as such parties remain in
full compliance.
9.
You are not required to accept this License, since you have not signed it.
However, nothing else grants you permission to modify or distribute the
Library or its derivative works. These actions are prohibited by law if you
do not accept this License. Therefore, by modifying or distributing the
Library (or any work based on the Library), you indicate your acceptance
of this License to do so, and all its terms and conditions for copying,
distributing or modifying the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the
Library), the recipient automatically receives a license from the original
licensor to copy, distribute, link with or modify the Library subject to
these terms and conditions. You may not impose any further restrictions
on the recipients’ exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties with this License.
PSR-SX900/SX700 Owner’s Manual
125
11. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot distribute
so as to satisfy simultaneously your obligations under this License and
any other pertinent obligations, then as a consequence you may not
distribute the Library at all. For example, if a patent license would not
permit royalty-free redistribution of the Library by all those who receive
copies directly or indirectly through you, then the only way you could
satisfy both it and this License would be to refrain entirely from
distribution of the Library.
If any portion of this section is held invalid or unenforceable under any
particular circumstance, the balance of the section is intended to apply,
and the section as a whole is intended to apply in other circumstances.
If you develop a new library, and you want it to be of the greatest possible use
to the public, we recommend making it free software that everyone can
redistribute and change. You can do so by permitting redistribution under
these terms (or, alternatively, under the terms of the ordinary General Public
License).
To apply these terms, attach the following notices to the library. It is safest to
attach them to the start of each source file to most effectively convey the
exclusion of warranty; and each file should have at least the “copyright” line
and a pointer to where the full notice is found.
<one line to give the library’s name and a brief idea of what it does.>
Copyright © <year> <name of author>
It is not the purpose of this section to induce you to infringe any patents
or other property right claims or to contest validity of any such claims;
this section has the sole purpose of protecting the integrity of the free
software distribution system which is implemented by public license
practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on
consistent application of that system; it is up to the author/donor to
decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
This library is free software; you can redistribute it and/or modify it under
the terms of the GNU Lesser General Public License as published by the
Free Software Foundation; either version 2.1 of the License, or (at your
option) any later version.
This section is intended to make thoroughly clear what is believed to be
a consequence of the rest of this License.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 021101301 USA
12. If the distribution and/or use of the Library is restricted in certain
countries either by patents or by copyrighted interfaces, the original
copyright holder who places the Library under this License may add an
explicit geographical distribution limitation excluding those countries, so
that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if
written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions
of the Lesser General Public License from time to time. Such new
versions will be similar in spirit to the present version, but may differ in
detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library
specifies a version number of this License which applies to it and “any
later version”, you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Library does not specify a license version
number, you may choose any version ever published by the Free
Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs
whose distribution conditions are incompatible with these, write to the
author to ask for permission. For software which is copyrighted by the
Free Software Foundation, write to the Free Software Foundation; we
sometimes make exceptions for this. Our decision will be guided by the
two goals of preserving the free status of all derivatives of our free
software and of promoting the sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE
IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF
TH LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY
OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE
LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE
OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
126
How to Apply These Terms to Your New
Libraries
PSR-SX900/SX700 Owner’s Manual
This library is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a “copyright disclaimer” for the library, if necessary.
Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’
(a library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
Note on source code distribution
For three years after the final factory shipment, you may request from
Yamaha the source code for any portions of the product which are licensed
under the GNU General Public License or GNU Lesser General Public
License by writing to one of the Yamaha office addresses listed at the end of
this Owner’s Manual.
The source code will be provided at no charge; however, we may require you
to reimburse Yamaha for the cost of delivering the source code to you.
• Note that we shall bear no responsibility whatsoever for any damage arising
from changes (additions/ deletions) made to the software for this product by
a third party other than Yamaha (or party authorized by Yamaha).
• Note that re-use of source code released to the public domain by Yamaha
is unguaranteed, and Yamaha shall not bear any responsibility whatsoever
for the source code.
• The source code can be downloaded from the following address:
https://download.yamaha.com/sourcecodes/ekb/
Note concernant la distribution du code source
Au cours des trois années qui suivent la sortie d'usine, vous pouvez
demander à Yamaha le code source de toute partie du produit fournie sous
licence dans le cadre d'une licence GNU General Public License ou GNU
Lesser General Public License en envoyant un courrier à l'un des bureaux de
Yamaha répertoriés dans la liste figurant à la fin du présent mode d'emploi.
Le code source vous sera fourni gratuitement. Nous pouvons toutefois vous
demander de rembourser à Yamaha les frais d'expédition du code.
• Notez que nous déclinons toute responsabilité pour les dommages
résultant de modifications (ajouts/suppressions) apportées au logiciel de
ce produit par un tiers autre que Yamaha (ou qu'une partie autorisée par
Yamaha).
• Notez que la réutilisation du code source distribué dans le domaine public
par Yamaha n'est pas garantie et que Yamaha décline toute responsabilité
pour le code source.
• Vous pouvez télécharger le code source à l'adresse suivante :
https://download.yamaha.com/sourcecodes/ekb/
libpng
This copy of the libpng notices is provided for your convenience. In case of
any discrepancy between this copy and the notices in the file png.h that is
included in the libpng distribution, the latter shall prevail.
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
If you modify libpng you may insert additional notices immediately following
this sentence.
This code is released under the libpng license.
libpng versions 1.0.7, July 1, 2000 through 1.6.28, January 5, 2017 are
Copyright (c) 2000-2002, 2004, 2006-2017 Glenn Randers-Pehrson, are
derived from libpng-1.0.6, and are distributed according to the same
disclaimer and license as libpng-1.0.6 with the following individuals added to
the list of Contributing Authors:
Simon-Pierre Cadieux
Eric S. Raymond
Mans Rullgard
Cosmin Truta
Gilles Vollant
James Yu
Mandar Sahastrabuddhe
and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment of the
library or against infringement. There is no warranty that our efforts or
the library will fulfill any of your particular purposes or needs. This
library is provided with all faults, and the entire risk of satisfactory quality,
performance, accuracy, and effort is with the user.
Some files in the “contrib” directory and some configure-generated files that
are distributed with libpng have other copyright owners and are released
under other open source licenses.
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are
Copyright (c) 1998-2000 Glenn Randers-Pehrson, are derived from libpng0.96, and are distributed according to the same disclaimer and license as
libpng-0.96, with the following individuals added to the list of Contributing
Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c)
1996-1997 Andreas Dilger, are derived from libpng-0.88, and are distributed
according to the same disclaimer and license as libpng-0.88, with the
following individuals added to the list of Contributing Authors:
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
Some files in the “scripts” directory have other copyright owners but are
released under this license.
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c)
1995-1996 Guy Eric Schalnat, Group 42, Inc.
The Contributing Authors and Group 42, Inc. specifically permit, without fee,
and encourage the use of this source code as a component to supporting the
PNG file format in commercial products. If you use this source code in a
product, acknowledgment is not required but would be appreciated.
END OF COPYRIGHT NOTICE, DISCLAIMER, and LICENSE.
TRADEMARK:
The name “libpng” has not been registered by the Copyright owner as a
trademark in any jurisdiction. However, because libpng has been distributed
and maintained world-wide, continually since 1995, the Copyright owner
claims “common-law trademark protection” in any jurisdiction where
common-law trademark is recognized.
OSI CERTIFICATION:
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is
a certification mark of the Open Source Initiative. OSI has not addressed the
additional disclaimers inserted at version 1.0.7.
EXPORT CONTROL:
The Copyright owner believes that the Export Control Classification Number
(ECCN) for libpng is EAR99, which means not subject to export controls or
International Traffic in Arms Regulations (ITAR) because it is open source,
publicly available software, that does not contain any encryption software.
See the EAR, paragraphs 734.3(b)(3) and 734.7(b).
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
January 5, 2017
libuuid
Copyright: 1996, 1997, 1998, 1999, 2007 Theodore Ts’o.
1999 Andreas Dilger (adilger@enel.ucalgary.ca)
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, and
the entire permission notice in its entirety, including the disclaimer of
warranties.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ALL OF WHICH ARE HEREBY DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
For the purposes of this copyright and license, “Contributing Authors” is
defined as the following set of individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
Tim Wegner
The PNG Reference Library is supplied “AS IS”. The Contributing Authors
and Group 42, Inc. disclaim all warranties, expressed or implied, including,
without limitation, the warranties of merchantability and of fitness for any
purpose. The Contributing Authors and Group 42, Inc. assume no liability for
direct, indirect, incidental, special, exemplary, or consequential damages,
which may result from the use of the PNG Reference Library, even if advised
of the possibility of such damage.
Permission is hereby granted to use, copy, modify, and distribute this source
code, or portions hereof, for any purpose, without fee, subject to the following
restrictions:
1. The origin of this source code must not be misrepresented.
libjpeg
This software is based in part on the work of the Independent JPEG Group.
imagemagick
Licensed under the ImageMagick License (the “License”); you may not use
this file except in compliance with the License. You may obtain a copy of the
License at
https://www.imagemagick.org/script/license.php
Unless required by applicable law or agreed to in writing, software distributed
under the License is distributed on an “AS IS” BASIS, WITHOUT
WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
2. Altered versions must be plainly marked as such and must not be
misrepresented as being the original source.
3. This Copyright notice may not be removed or altered from any source
or altered source distribution.
PSR-SX900/SX700 Owner’s Manual
127
FreeType
libss2 / libcomerr2
Portions of this software are copyright © 2016 The FreeType Project
(www.freetype.org). All rights reserved.
Copyright 1987, 1988 by the Student Information Processing Board of the
Massachusetts Institute of Technology
ICU
COPYRIGHT AND PERMISSION NOTICE
Copyright © 1991-2016 Unicode, Inc. All rights reserved.
Distributed under the Terms of Use in http://www.unicode.org/copyright.html.
Permission is hereby granted, free of charge, to any person obtaining a copy
of the Unicode data files and any associated documentation (the “Data
Files”) or Unicode software and any associated documentation (the
“Software”) to deal in the Data Files or Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish, distribute,
and/or sell copies of the Data Files or Software, and to permit persons to
whom the Data Files or Software are furnished to do so, provided that either
(a) this copyright and permission notice appear with all copies of the Data
Files or Software, or
(b) this copyright and permission notice appear in associated
Documentation.
THE DATA FILES AND SOFTWARE ARE PROVIDED “AS IS”, WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD
PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS
INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY
SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY
DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THE DATA FILES OR
SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in these Data Files or Software without prior written authorization of the
copyright holder.
jemalloc
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted, provided
that the above copyright notice appear in all copies and that both that
copyright notice and this permission notice appear in supporting
documentation, and that the names of M.I.T. and the M.I.T. S.I.P.B. not be
used in advertising or publicity pertaining to distribution of the software
without specific, written prior permission.
M.I.T. and the M.I.T. S.I.P.B. make no representations about the suitability of
this software for any purpose. It is provided “as is” without express or implied
warranty.
libpopt0
Copyright (c) 1998 Red Hat Software
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the “Software”), to deal
in the Software without restriction, including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
the Software, and to permit persons to whom the Software is furnished to do
so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X
CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of the X Consortium shall not be
used in advertising or otherwise to promote the sale, use or other dealings in
this Software without prior written authorization from the X Consortium.
pcre
Copyright (C) 2002-2014 Jason Evans <jasone@canonware.com>.
All rights reserved.
Copyright (C) 2007-2012 Mozilla Foundation. All rights reserved.
Copyright (C) 2009-2014 Facebook, Inc. All rights reserved.
PCRE LICENCE
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice(s),
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice(s), this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
Release 8 of PCRE is distributed under the terms of the “BSD” licence, as
specified below. The documentation for PCRE, supplied in the “doc”
directory, is distributed under the same terms as the software itself.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) “AS IS”
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE COPYRIGHT HOLDER(S) BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
PCRE is a library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language.
The basic library functions are written in C and are freestanding. Also
included in the distribution is a set of C++ wrapper functions, and a just-intime compiler that can be used to optimize pattern matching. These are both
optional features that can be omitted when the library is built.
THE BASIC LIBRARY FUNCTIONS
Written by:
Philip Hazel
Email local part: ph10
Email domain:
cam.ac.uk
University of Cambridge Computing Service,
Cambridge, England.
Copyright (c) 1997-2012 University of Cambridge
All rights reserved.
PCRE JUST-IN-TIME COMPILATION SUPPORT
Written by:
Zoltan Herczeg
Email local part: hzmester
Emain domain: freemail.hu
Copyright(c) 2010-2012 Zoltan Herczeg
All rights reserved.
STACK-LESS JUST-IN-TIME COMPILER
Written by:
Zoltan Herczeg
Email local part: hzmester
Emain domain: freemail.hu
Copyright(c) 2009-2012 Zoltan Herczeg
All rights reserved.
128
PSR-SX900/SX700 Owner’s Manual
THE C++ WRAPPER FUNCTIONS
Contributed by: Google Inc.
Copyright (c) 2007-2012, Google Inc.
All rights reserved.
THE “BSD” LICENCE
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of the University of Cambridge nor the name of
Google Inc. nor the names of their contributors may be used to
endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
End
PSR-SX900/SX700 Owner’s Manual
129
130
PSR-SX900/SX700 Owner’s Manual
1-YEAR LIMITED WARRANTY
ON ARRANGER WORKSTATION KEYBOARDS
Thank you for selecting a Yamaha product. Yamaha products are designed and manufactured to provide a high level of defect-free
performance. Yamaha Corporation of America (“Yamaha”) is proud of the experience and craftsmanship that goes into each and
every Yamaha product. Yamaha sells its products through a network of reputable, specially authorized dealers and is pleased to offer
you, the Original Owner, the following Limited Warranty, which applies only to products that have been (1) directly purchased from
Yamaha’s authorized dealers in the fifty states of the USA and District of Columbia (the “Warranted Area”) and (2) used exclusively in
the Warranted Area. Yamaha suggests that you read the Limited Warranty thoroughly, and invites you to contact your authorized
Yamaha dealer or Yamaha Customer Service if you have any questions.
Coverage: Yamaha will, at its option, repair or replace the product covered by this warranty if it becomes defective, malfunctions or
otherwise fails to conform with this warranty under normal use and service during the term of this warranty, without charge for labor
or materials. Repairs may be performed using new or refurbished parts that meet or exceed Yamaha specifications for new parts. If
Yamaha elects to replace the product, the replacement may be a reconditioned unit. You will be responsible for any installation or
removal charges and for any initial shipping charges if the product(s) must be shipped for warranty service. However, Yamaha will
pay the return shipping charges to any destination within the USA if the repairs are covered by the warranty. This warranty does not
cover (a) damage, deterioration or malfunction resulting from accident, negligence, misuse, abuse, improper installation or operation
or failure to follow instructions according to the Owner’s Manual for this product; any shipment of the product (claims must be
presented to the carrier); repair or attempted repair by anyone other than Yamaha or an authorized Yamaha Service Center; (b) any
unit which has been altered or on which the serial number has been defaced, modified or removed; (c) normal wear and any periodic
maintenance; (d) deterioration due to perspiration, corrosive atmosphere or other external causes such as extremes in temperature
or humidity; (e) damages attributable to power line surge or related electrical abnormalities, lightning damage or acts of God; or (f)
RFI/EMI (Interference/noise) caused by improper grounding or the improper use of either certified or uncertified equipment, if
applicable. Any evidence of alteration, erasing or forgery of proof-of-purchase documents will cause this warranty to be void. This
warranty covers only the Original Owner and is not transferable.
In Order to Obtain Warranty Service: Warranty service will only be provided for defective products within the Warranted
Area. Contact your local authorized Yamaha dealer who will advise you of the procedures to be followed. If this is not successful,
contact Yamaha at the address, telephone number or website shown below. Yamaha may request that you send the defective product
to a local authorized Yamaha Servicer or authorize return of the defective product to Yamaha for repair. If you are uncertain as to
whether a dealer has been authorized by Yamaha, please contact Yamaha’s Service Department at the number shown below, or
check Yamaha’s website at www.Yamaha.com. Product(s) shipped for service should be packed securely and must be accompanied
by a detailed explanation of the problem(s) requiring service, together with the original or a machine reproduction of the bill of sale or
other dated, proof-of-purchase document describing the product, as evidence of warranty coverage. Should any product submitted
for warranty service be found ineligible therefore, an estimate of repair cost will be furnished and the repair will be accomplished only
if requested by you and upon receipt of payment or acceptable arrangement for payment.
Limitation of Implied Warranties and Exclusion of Damages: ANY IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED IN DURATION TO
THE APPLICABLE PERIOD OF TIME SET FORTH ABOVE. YAMAHA SHALL NOT BE RESPONSIBLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE, DAMAGE TO ANY OTHER
EQUIPMENT OR OTHER ITEMS AT THE SITE OF USE OR INTERRUPTION OF PERFORMANCES OR ANY CONSEQUENCES.
YAMAHA’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT
YAMAHA’S OPTION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION
MAY NOT APPLY TO YOU. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to
state. This is the only express warranty applicable to the product specified herein; Yamaha neither assumes nor authorizes anyone to
assume for it any other express warranty.
If you have any questions about service received or if you need assistance in locating an authorized Yamaha
Servicer, please contact:
CUSTOMER SERVICE
Yamaha Corporation of America
6600 Orangethorpe Avenue, Buena Park, California 90620-1373
Telephone: 800-854-1569
www.yamaha.com
Do not return any product to the above address without a written Return Authorization issued by YAMAHA.
©2019 Yamaha Corporation of America.
PSR-SX900/SX700 Owner’s Manual
131
Information for users on collection and disposal of old equipment:
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products
should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with
your national legislation.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on
human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste disposal
service or the point of sale where you purchased the items.
For business users in the European Union:
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union:
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer
and ask for the correct method of disposal.
(weee_eu_en_02)
Informations concernant la collecte et le traitement des déchets d’équipements électriques et électroniques
Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés
ne doivent pas être mélangés avec les déchets domestiques habituels.
Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements électriques et électroniques, veuillez
les déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale.
En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauvegarde
de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors d'un
traitement inapproprié des déchets.
Pour plus d'informations à propos de la collecte et du recyclage des déchets d’équipements électriques et électroniques, veuillez
contacter votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les produits.
Pour les professionnels dans l'Union européenne :
Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques, veuillez contacter votre vendeur ou
fournisseur pour plus d'informations.
Informations sur la mise au rebut dans d'autres pays en dehors de l'Union européenne :
Ce symbole est seulement valable dans l'Union européenne. Si vous souhaitez vous débarrasser de déchets d’équipements
électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement
appropriée.
(weee_eu_fr_02)
FCC and IC Information
For U.S.A.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
For CANADA
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
For U.S.A. and CANADA
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption rate
(SAR).
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non
contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d’exposition et d’exposition aux
fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée
conforme sans évaluation du débit d’absorption spécifique (DAS).
For EU countries
BG
Bulgarian
ОПРОСТЕНА ЕС ДЕКЛАРАЦИЯ ЗА СЪОТВЕТСТВИЕ
С настоящото Yamaha Music Europe GmbH декларира, че този тип
радиосъоръжение [PSR-SX900, PSR-SX700] е в съответствие с
Директива 2014/53/ЕС. Цялостният текст на ЕС декларацията за
съответствие може да се намери на следния интернет адрес:
https://europe.yamaha.com/en/support/compliance/doc.html
ES
Spanish
DECLARACIÓN UE DE CONFORMIDAD SIMPLIFICADA
Por la presente, Yamaha Music Europe GmbH declara que el tipo de
equipo radioeléctrico [PSR-SX900, PSR-SX700] es conforme con la
Directiva 2014/53/UE. El texto completo de la declaración UE de
conformidad está disponible en la dirección Internet siguiente:
https://europe.yamaha.com/en/support/compliance/doc.html
CS
Czech
ZJEDNODUŠENÉ EU PROHLÁŠENÍ O SHODĚ
Tímto Yamaha Music Europe GmbH prohlašuje, že typ rádiového
zařízení [PSR-SX900, PSR-SX700] je v souladu se směrnicí 2014/53/
EU. Úplné znění EU prohlášení o shodě je k dispozici na této
internetové adrese:
https://europe.yamaha.com/en/support/compliance/doc.html
DA
Danish
FORENKLET EU-OVERENSSTEMMELSESERKLÆRING
Hermed erklærer Yamaha Music Europe GmbH, at radioudstyrstypen
[PSR-SX900, PSR-SX700] er i overensstemmelse med direktiv 2014/
53/EU. EU-overensstemmelseserklæringens fulde tekst kan findes på
følgende internetadresse:
https://europe.yamaha.com/en/support/compliance/doc.html
DE
German
LT
Lithuanian
SUPAPRASTINTA ES ATITIKTIES DEKLARACIJA
Aš, Yamaha Music Europe GmbH, patvirtinu, kad radijo įrenginių tipas
[PSR-SX900, PSR-SX700] atitinka Direktyvą 2014/53/ES. Visas ES
atitikties deklaracijos tekstas prieinamas šiuo interneto adresu:
https://europe.yamaha.com/en/support/compliance/doc.html
HU
Hungarian
EGYSZERŰSÍTETT EU-MEGFELELŐSÉGI NYILATKOZAT
Yamaha Music Europe GmbH igazolja, hogy a [PSR-SX900, PSRSX700] típusú rádióberendezés megfelel a 2014/53/EU irányelvnek. Az
EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő
internetes címen:
https://europe.yamaha.com/en/support/compliance/doc.html
NL
Dutch
VEREENVOUDIGDE EU-CONFORMITEITSVERKLARING
Hierbij verklaar ik, Yamaha Music Europe GmbH, dat het type
radioapparatuur [PSR-SX900, PSR-SX700] conform is met Richtlijn
2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan
worden geraadpleegd op het volgende internetadres:
https://europe.yamaha.com/en/support/compliance/doc.html
PL
Polish
UPROSZCZONA DEKLARACJA ZGODNOŚCI UE
Yamaha Music Europe GmbH niniejszym oświadcza, że typ urządzenia
radiowego [PSR-SX900, PSR-SX700] jest zgodny z dyrektywą 2014/53/
UE. Pełny tekst deklaracji zgodności UE jest dostępny pod
następującym adresem internetowym:
https://europe.yamaha.com/en/support/compliance/doc.html
PT
Portuguese
VEREINFACHTE EU-KONFORMITÄTSERKLÄRUNG
Hiermit erklärt Yamaha Music Europe GmbH, dass der Funkanlagentyp
[PSR-SX900, PSR-SX700] der Richtlinie 2014/53/EU entspricht. Der
vollständige Text der EU-Konformitätserklärung ist unter der folgenden
Internetadresse verfügbar:
DECLARAÇÃO UE DE CONFORMIDADE SIMPLIFICADA
O(a) abaixo assinado(a) Yamaha Music Europe GmbH declara que o
presente tipo de equipamento de rádio [PSR-SX900, PSR-SX700] está
em conformidade com a Diretiva 2014/53/UE. O texto integral da
declaração de conformidade está disponível no seguinte endereço de
Internet:
ET
RO
https://europe.yamaha.com/en/support/compliance/doc.html
Estonian
https://europe.yamaha.com/en/support/compliance/doc.html
Romanian
LIHTSUSTATUD ELI VASTAVUSDEKLARATSIOON
Käesolevaga deklareerib Yamaha Music Europe GmbH, et käesolev
raadioseadme tüüp [PSR-SX900, PSR-SX700] vastab direktiivi 2014/
53/EL nõuetele. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav
järgmisel internetiaadressil:
DECLARAȚIA UE DE CONFORMITATE SIMPLIFICATĂ
Prin prezenta, Yamaha Music Europe GmbH declară că tipul de
echipamente radio [PSR-SX900, PSR-SX700] este în conformitate cu
Directiva 2014/53/UE. Textul integral al declarației UE de conformitate
este disponibil la următoarea adresă internet:
EL
SK
https://europe.yamaha.com/en/support/compliance/doc.html
Greek
ΑΠΛΟΥΣΤΕΥΜΕΝΗ ∆ΗΛΩΣΗ ΣΥΜΜΟΡΦΩΣΗΣ ΕΕ
Με την παρούσα ο/η Yamaha Music Europe GmbH, δηλώνει ότι ο
ραδιοεξοπλισμός [PSR-SX900, PSR-SX700] πληροί την οδηγία 2014/
53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ διατίθεται
στην ακόλουθη ιστοσελίδα στο διαδίκτυο:
https://europe.yamaha.com/en/support/compliance/doc.html
EN
English
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Yamaha Music Europe GmbH declares that the radio
equipment type [PSR-SX900, PSR-SX700] is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
https://europe.yamaha.com/en/support/compliance/doc.html
FR
French
DECLARATION UE DE CONFORMITE SIMPLIFIEE
Le soussigné, Yamaha Music Europe GmbH, déclare que l'équipement
radioélectrique du type [PSR-SX900, PSR-SX700] est conforme à la
directive 2014/53/UE. Le texte complet de la déclaration UE de
conformité est disponible à l'adresse internet suivante:
https://europe.yamaha.com/en/support/compliance/doc.html
HR
Croatian
POJEDNOSTAVLJENA EU IZJAVA O SUKLADNOSTI
Yamaha Music Europe GmbH ovime izjavljuje da je radijska oprema
tipa [PSR-SX900, PSR-SX700] u skladu s Direktivom 2014/53/EU.
Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj
internetskoj adresi:
https://europe.yamaha.com/en/support/compliance/doc.html
IT
Italian
DICHIARAZIONE DI CONFORMITÀ UE SEMPLIFICATA
Il fabbricante, Yamaha Music Europe GmbH, dichiara che il tipo di
apparecchiatura radio [PSR-SX900, PSR-SX700] è conforme alla
direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità
UE è disponibile al seguente indirizzo Internet:
https://europe.yamaha.com/en/support/compliance/doc.html
LV
Latvian
VIENKĀRŠOTA ES ATBILSTĪBAS DEKLARĀCIJA
Ar šo Yamaha Music Europe GmbH deklarē, ka radioiekārta [PSRSX900, PSR-SX700] atbilst Direktīvai 2014/53/ES. Pilns ES atbilstības
deklarācijas teksts ir pieejams šādā interneta vietnē:
https://europe.yamaha.com/en/support/compliance/doc.html
https://europe.yamaha.com/en/support/compliance/doc.html
Slovak
ZJEDNODUŠENÉ EÚ VYHLÁSENIE O ZHODE
Yamaha Music Europe GmbH týmto vyhlasuje, že rádiové zariadenie
typu [PSR-SX900, PSR-SX700] je v súlade so smernicou 2014/53/EÚ.
Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese:
https://europe.yamaha.com/en/support/compliance/doc.html
SL
Slovenian
POENOSTAVLJENA IZJAVA EU O SKLADNOSTI
Yamaha Music Europe GmbH potrjuje, da je tip radijske opreme [PSRSX900, PSR-SX700] skladen z Direktivo 2014/53/EU. Celotno besedilo
izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu:
https://europe.yamaha.com/en/support/compliance/doc.html
FI
Finnish
YKSINKERTAISTETTU EU-VAATIMUSTENMUKAISUUSVAKUUTUS
Yamaha Music Europe GmbH vakuuttaa, että radiolaitetyyppi [PSRSX900, PSR-SX700] on direktiivin 2014/53/EU mukainen. EUvaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla
seuraavassa internetosoitteessa:
https://europe.yamaha.com/en/support/compliance/doc.html
SV
Swedish
FÖRENKLAD EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE
Härmed försäkrar Yamaha Music Europe GmbH att denna typ av
radioutrustning [PSR-SX900, PSR-SX700] överensstämmer med
direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om
överensstämmelse finns på följande webbadress:
https://europe.yamaha.com/en/support/compliance/doc.html
TR
Turkey
BASİTLEŞTİRİLMİŞ AVRUPA BİRLİĞİ UYGUNLUK BİLDİRİMİ
İşbu belge ile, Yamaha Music Europe GmbH, radyo cihaz tipinin [PSRSX900, PSR-SX700], Direktif 2014/53/AB'ye uygunluğunu beyan eder.
AB uyumu beyanının tam metni aşağıdaki internet adresinden
edinilebilir:
https://europe.yamaha.com/en/support/compliance/doc.html
For details of products, please contact your nearest Yamaha
representative or the authorized distributor listed below.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha
ou au distributeur le plus proche de vous figurant dans la liste suivante.
Yamaha Canada Music Ltd.
135 Milner Avenue, Toronto, Ontario M1S 3R1,
Canada
Tel: +1-416-298-1311
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Avenue, Buena Park, CA 90620,
U.S.A.
Tel: +1-714-522-9011
CENTRAL & SOUTH AMERICA
MEXICO
Yamaha de México, S.A. de C.V.
Av. Insurgentes Sur 1647 Piso 9, Col. San José
Insurgentes, Delegación Benito Juárez, México,
D.F., C.P. 03900, México
Tel: +52-55-5804-0600
BRAZIL
Yamaha Musical do Brasil Ltda.
Rua Fidêncio Ramos, 302 – Cj 52 e 54 – Torre B –
Vila Olímpia – CEP 04551-010 – São Paulo/SP,
Brazil
Tel: +55-11-3704-1377
ARGENTINA
Yamaha Music Europe
7 rue Ambroise Croizat, Zone d'activités de Pariest,
77183 Croissy-Beaubourg, France
Tel: +33-1-6461-4000
Yamaha Music Europe GmbH, Branch Italy
Via Tinelli N.67/69 20855 Gerno di Lesmo (MB),
Italy
Tel: +39-039-9065-1
SPAIN/PORTUGAL
Yamaha Music Europe GmbH Ibérica, Sucursal
en España
Ctra. de la Coruña km. 17,200, 28231
Las Rozas de Madrid, Spain
Tel: +34-91-639-88-88
GREECE
Philippos Nakas S.A. The Music House
19th klm. Leof. Lavriou 190 02 Peania – Attiki,
Greece
Tel: +30-210-6686260
SWEDEN
Yamaha Music Europe GmbH Germany filial
Scandinavia
JA Wettergrensgata 1, 400 43 Göteborg, Sweden
Tel: +46-31-89-34-00
DENMARK
FINLAND
F-Musiikki Oy
Antaksentie 4
FI-01510 Vantaa, Finland
Tel: +358 (0)96185111
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Edificio Torre Davivienda, Piso: 20
Avenida Balboa, Marbella, Corregimiento de Bella
Vista, Ciudad de Panamá, Rep. de Panamá
Tel: +507-269-5311
EUROPE
THE UNITED KINGDOM/IRELAND
Yamaha Music Europe GmbH (UK)
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, U.K.
Tel: +44-1908-366700
GERMANY
Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
Tel: +49-4101-303-0
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Europe GmbH, Branch
Switzerland in Thalwil
Seestrasse 18a, 8800 Thalwil, Switzerland
Tel: +41-44-3878080
AUSTRIA/CROATIA/CZECH REPUBLIC/
HUNGARY/ROMANIA/SLOVAKIA/
SLOVENIA
Yamaha Music Europe GmbH, Branch Austria
Schleiergasse 20, 1100 Wien, Austria
Tel: +43-1-60203900
NORWAY
Yamaha Music Europe GmbH Germany Norwegian Branch
Grini Næringspark 1, 1332 Østerås, Norway
Tel: +47-6716-7800
ICELAND
Hljodfaerahusid Ehf.
Sidumula 20
IS-108 Reykjavik, Iceland
Tel: +354-525-5050
CYPRUS
Nakas Music Cyprus Ltd.
Nikis Ave 2k
1086 Nicosia
Tel: + 357-22-511080
Major Music Center
21 Ali Riza Ave. Ortakoy
P.O.Box 475 Lefkoşa, Cyprus
Tel: (392) 227 9213
RUSSIA
Yamaha Music (Russia) LLC.
Room 37, entrance 7, bld. 7, Kievskaya street,
Moscow, 121059, Russia
Tel: +7-495-626-5005
OTHER EUROPEAN COUNTRIES
Yamaha Music Europe GmbH
Siemensstrasse 22-34, 25462 Rellingen, Germany
Tel: +49-4101-303-0
POLAND
Yamaha Music Europe GmbH
Sp.z o.o. Oddział w Polsce
ul. Wielicka 52, 02-657 Warszawa, Poland
Tel: +48-22-880-08-88
BULGARIA
Dinacord Bulgaria LTD.
Bul.Iskarsko Schose 7 Targowski Zentar Ewropa
1528 Sofia, Bulgaria
Tel: +359-2-978-20-25
MALTA
Olimpus Music Ltd.
Valletta Road, Mosta MST9010, Malta
Tel: +356-2133-2093
Yamaha Music Europe, Branch Benelux
Clarissenhof 5b, 4133 AB Vianen, The Netherlands
Tel: +31-347-358040
OTHER COUNTRIES
Yamaha Music Gulf FZE
JAFZA-16, Office 512, P.O.Box 17328,
Jebel Ali FZE, Dubai, UAE
Tel: +971-4-801-1500
ITALY
Yamaha Music Denmark,
Fillial of Yamaha Music Europe GmbH, Tyskland
Generatorvej 8C, ST. TH., 2860 Søborg, Denmark
Tel: +45-44-92-49-00
Yamaha Music Latin America, S.A.,
Sucursal Argentina
Olga Cossettini 1553, Piso 4 Norte,
Madero Este-C1107CEK,
Buenos Aires, Argentina
Tel: +54-11-4119-7000
DMI27
Para detalles sobre productos, contacte su tienda Yamaha más
cercana o el distribuidor autorizado que se lista debajo.
FRANCE
NORTH AMERICA
CANADA
NETHERLANDS/BELGIUM/
LUXEMBOURG
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
AFRICA
Yamaha Music Gulf FZE
JAFZA-16, Office 512, P.O.Box 17328,
Jebel Ali FZE, Dubai, UAE
Tel: +971-4-801-1500
MIDDLE EAST
TURKEY
Yamaha Music Europe GmbH
Merkezi Almanya Türkiye İstanbul Şubesi
Mor Sumbul Sokak Varyap Meridian Business
1.Blok No:1 113-114-115
Bati Atasehir Istanbul, Turkey
Tel: +90-216-275-7960
ASIA
THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co., Ltd.
2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu,
Shanghai, China
Tel: +86-400-051-7700
HONG KONG
Tom Lee Music Co., Ltd.
11/F., Silvercord Tower 1, 30 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel: +852-2737-7688
INDIA
Yamaha Music India Private Limited
P-401, JMD Megapolis, Sector-48, Sohna Road,
Gurugram-122018, Haryana, India
Tel: +91-124-485-3300
INDONESIA
PT. Yamaha Musik Indonesia (Distributor)
Yamaha Music Center Bldg. Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: +62-21-520-2577
KOREA
Yamaha Music Korea Ltd.
11F, Prudential Tower, 298, Gangnam-daero,
Gangnam-gu, Seoul, 06253, Korea
Tel: +82-2-3467-3300
MALAYSIA
Yamaha Music (Malaysia) Sdn. Bhd.
No.8, Jalan Perbandaran, Kelana Jaya, 47301
Petaling Jaya, Selangor, Malaysia
Tel: +60-3-78030900
SINGAPORE
Yamaha Music (Asia) Private Limited
Block 202 Hougang Street 21, #02-00,
Singapore 530202, Singapore
Tel: +65-6740-9200
TAIWAN
Yamaha Music & Electronics Taiwan Co., Ltd.
2F., No.1, Yuandong Rd., Banqiao Dist.,
New Taipei City 22063, Taiwan (R.O.C.)
Tel: +886-2-7741-8888
THAILAND
Siam Music Yamaha Co., Ltd.
3, 4, 15, 16th Fl., Siam Motors Building,
891/1 Rama 1 Road, Wangmai,
Pathumwan, Bangkok 10330, Thailand
Tel: +66-2215-2622
VIETNAM
Yamaha Music Vietnam Company Limited
15th Floor, Nam A Bank Tower, 201-203 Cach
Mang Thang Tam St., Ward 4, Dist.3,
Ho Chi Minh City, Vietnam
Tel: +84-28-3818-1122
OTHER ASIAN COUNTRIES
https://asia-latinamerica-mea.yamaha.com/
index.html
OCEANIA
AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 80 Market Street, South Melbourne,
VIC 3205 Australia
Tel: +61-3-9693-5111
NEW ZEALAND
Music Works LTD
P.O.BOX 6246 Wellesley, Auckland 4680,
New Zealand
Tel: +64-9-634-0099
COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
https://asia-latinamerica-mea.yamaha.com/
index.html
ISRAEL
RBX International Co., Ltd.
P.O Box 10245, Petach-Tikva, 49002
Tel: (972) 3-925-6900
Head Office/Manufacturer: Yamaha Corporation 10-1, Nakazawa-cho, Naka-ku, Hamamatsu, 430-8650, Japan
(For European Countries) Importer: Yamaha Music Europe GmbH Siemensstrasse 22-34, 25462 Rellingen, Germany
Yamaha Global Site
https://www.yamaha.com/
Yamaha Downloads
https://download.yamaha.com/
Manual Development Group
© 2019 Yamaha Corporation
Published 03/2019
POMA*.*- **A0
VAZ2410
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising