Yamaha | RX-V485 | Owner’s Manual | Yamaha RX-V485/RX-D485 Owner’s Manual

Yamaha RX-V485/RX-D485 Owner’s Manual
AV Receiver
Owner's Manual
• This unit is a product for enjoying video and music at home.
• This manual explains preparations and operations for everyday users of the unit.
• Read the supplied booklet “Quick Start Guide” before using the unit.
EN
CONTENTS
BEFORE USING THE UNIT
7
3
Connecting playback devices.......................................................... 25
HDMI connection with a video device such as a BD/DVD player......................................................................... 25
How to use this manual............................................................................ 7
Connection other than HDMI with a playback device............................................................................................. 25
How to use this manual......................................................................................................................................................... 7
Connecting to the jack on the front panel................................................................................................................... 26
4
Checking the accessories.......................................................................... 7
Connecting the radio antennas....................................................... 27
Checking the accessories...................................................................................................................................................... 7
Connecting the FM/AM antennas (RX-V485)............................................................................................................... 27
Using the remote control......................................................................... 8
Connecting the DAB/FM antenna (RX-D485).............................................................................................................. 28
5
Insert the batteries in the remote control....................................................................................................................... 8
Operating range of the remote control........................................................................................................................... 8
FEATURES
Preparing for connecting to a network........................................... 29
Preparing for connecting to a network......................................................................................................................... 29
Connecting a network cable (wired connection)...................................................................................................... 29
9
Preparing wireless antennas (wireless connection).................................................................................................. 30
6
What you can do with the unit................................................................. 9
Plugging in the power cable............................................................ 30
Plugging in the power cable............................................................................................................................................. 30
Part names and functions...................................................................... 11
7
Part names and functions of the front panel............................................................................................................... 11
Selecting the on-screen menu language........................................ 31
Selecting the on-screen menu language...................................................................................................................... 31
Part names and functions of the front display............................................................................................................ 13
8
Part names and functions of the rear panel................................................................................................................. 14
Configuring the necessary speaker settings.................................. 32
Assigning speaker configuration..................................................................................................................................... 32
Part names and functions of the remote control....................................................................................................... 15
Optimizing the speaker settings automatically (YPAO).......................................................................................... 33
PREPARATIONS
1
16
Error messages from YPAO................................................................................................................................................ 35
Warning messages from YPAO......................................................................................................................................... 36
9
Connecting speakers........................................................................ 16
What is MusicCast.................................................................................................................................................................. 37
Speaker systems and speakers to be connected....................................................................................................... 17
Using MusicCast CONTROLLER......................................................................................................................................... 37
Speaker requirements.......................................................................................................................................................... 17
Adding the unit to the MusicCast network.................................................................................................................. 37
Setting the speaker impedance....................................................................................................................................... 18
ENJOYING SOUND
Cable requirements.............................................................................................................................................................. 18
How to connect speakers................................................................................................................................................... 18
2
Setting MusicCast............................................................................. 37
Names and functions of speakers.................................................................................................................................... 16
38
How to place speakers (speaker systems).................................................................................................................... 20
Enjoying sound field effects.................................................................. 38
Connecting front speakers that support bi-amp connections............................................................................. 23
Select your favorite sound mode..................................................................................................................................... 38
Connecting a TV................................................................................ 24
Enjoying 3D sound fields (CINEMA DSP 3D)................................................................................................................ 38
Enjoying sound field effects optimized for the type of content........................................................................... 39
HDMI connection with a TV............................................................................................................................................... 24
Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)............................................ 39
VIDEO (composite video) connection with a TV........................................................................................................ 24
Enjoying surround sound with 5 speakers placed in front (Virtual CINEMA FRONT).................................... 39
Enjoying surround sound with headphones (SILENT CINEMA)............................................................................ 39
2
En
Enjoying unprocessed playback............................................................ 40
Listening to DAB radio (RX-D485)......................................................... 56
Enjoying original sound (straight decode)................................................................................................................... 40
Preparing the DAB tuning.................................................................................................................................................. 56
Enjoying multichannel playback without sound field effects (surround decoder)....................................... 40
Selecting a DAB radio station for reception................................................................................................................. 57
Enjoying pure high fidelity sound (direct playback)................................................................................................. 41
Selecting a preset DAB radio station.............................................................................................................................. 57
Enjoying enhanced bass sound............................................................. 41
Registering a DAB radio station as presets................................................................................................................... 58
Clearing preset DAB radio stations................................................................................................................................. 59
Enhancing the bass (Extra Bass)....................................................................................................................................... 41
Displaying the DAB information...................................................................................................................................... 59
Enjoying enhanced compressed music................................................. 42
Checking reception strength of each DAB channel label....................................................................................... 60
Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)......... 42
Listening to FM radio (RX-D485)........................................................... 61
Enjoying music in multiple rooms......................................................... 43
Selecting a frequency for FM radio reception............................................................................................................. 61
Playing back music in multiple rooms........................................................................................................................... 43
Selecting a preset FM radio station................................................................................................................................. 62
Connecting Zone B speakers............................................................................................................................................. 43
Registering FM radio stations automatically (Auto Preset).................................................................................... 62
Operating the Zone B........................................................................................................................................................... 44
Registering an FM radio station manually.................................................................................................................... 63
Correcting volume difference between Zone A and Zone B................................................................................. 45
Clearing preset FM radio stations.................................................................................................................................... 64
Adjusting the volume for Zone B separately............................................................................................................... 45
PLAYBACK
Displaying the Radio Data System information......................................................................................................... 64
Playing back music stored on a Bluetooth® device.............................. 65
46
Playback Bluetooth® device music on the unit........................................................................................................... 65
Enjoying audio using Bluetooth® speakers/headphones....................................................................................... 66
Basic playback procedure...................................................................... 46
Playing back music with AirPlay............................................................ 67
Basic procedure for playing back video and music................................................................................................... 46
Switching information on the front display................................................................................................................. 47
Playback of iTunes/iPhone music contents with AirPlay........................................................................................ 67
Item names and functions of the playback screen.................................................................................................... 48
Playing back music stored on a USB storage device............................ 68
Item names and functions of the browse screen....................................................................................................... 49
Playback of USB storage device contents..................................................................................................................... 68
Listening to FM/AM radio (RX-V485)..................................................... 50
Playing back music stored on media servers (PCs/NAS)...................... 69
Setting the frequency steps............................................................................................................................................... 50
Media sharing setup on media servers (PCs/NAS)..................................................................................................... 69
Selecting a frequency for reception............................................................................................................................... 51
Playing back music stored on media servers (PCs/NAS)......................................................................................... 69
Selecting a preset station................................................................................................................................................... 52
Listening to Internet radio..................................................................... 71
Registering radio stations automatically (Auto Preset)........................................................................................... 52
Selecting an Internet radio station.................................................................................................................................. 71
Registering a radio station manually.............................................................................................................................. 53
Registering favorite Internet radio stations................................................................................................................. 71
Clearing preset stations....................................................................................................................................................... 54
Displaying the Radio Data System information......................................................................................................... 54
Listening to music streaming services.................................................. 72
Receiving traffic information automatically................................................................................................................ 55
Listening to a streaming service...................................................................................................................................... 72
Useful playback functions...................................................................... 73
SCENE function....................................................................................................................................................................... 73
Shortcut function................................................................................................................................................................... 75
3
En
Configuring playback settings for different playback sources
(Option menu)......................................................................................... 77
Configuring the speaker settings.......................................................... 93
Basic operation of the Option menu.............................................................................................................................. 77
Setting the use of a subwoofer......................................................................................................................................... 93
Option menu items............................................................................................................................................................... 78
Setting the size of the front speakers............................................................................................................................. 94
Switching the input source................................................................................................................................................ 79
Setting the use of a center speaker and its size.......................................................................................................... 94
Adjusting the tone of the audio output........................................................................................................................ 79
Setting the use of surround speakers and their size................................................................................................. 95
Configuring DSP/Surround................................................................................................................................................ 79
Setting the crossover frequency of the low-frequency components................................................................. 95
Correcting volume differences during playback........................................................................................................ 82
Setting the phase of the subwoofer............................................................................................................................... 96
Enabling Lipsync adjustment............................................................................................................................................ 82
Setting the use of Extra Bass.............................................................................................................................................. 96
Checking information about the video/audio signals............................................................................................. 83
Setting the use of Virtual CINEMA FRONT.................................................................................................................... 96
Combining audio of another input source with video of the current input source...................................... 83
Setting the distance between each speaker and the listening position........................................................... 96
Selecting a video source to be output with the selected audio source............................................................ 84
Adjusting the volume of each speaker.......................................................................................................................... 97
Setting your speaker system............................................................................................................................................. 93
Switching between stereo and monaural for FM radio reception...................................................................... 84
Setting the equalizer............................................................................................................................................................ 97
Setting presets for radio stations..................................................................................................................................... 85
Outputting test tones.......................................................................................................................................................... 98
Receiving traffic information automatically................................................................................................................ 86
Configuring the HDMI settings.............................................................. 99
Configuring the shuffle setting........................................................................................................................................ 86
Setting the use of HDMI Control...................................................................................................................................... 99
Configuring the repeat setting......................................................................................................................................... 87
Setting the output of HDMI audio from the TV speaker......................................................................................... 99
Enabling volume control via AirPlay............................................................................................................................... 87
Setting the use of HDMI Standby Through.................................................................................................................. 99
Adding an Internet radio station to the “Favorites” folder..................................................................................... 87
Setting the use of 4K upscaling of the HDMI video signal...................................................................................... 99
Removing an Internet radio station from the “Favorites” folder.......................................................................... 87
Setting the version of HDCP used on the HDMI input jacks................................................................................ 100
Performing an initial scan for DAB radio reception................................................................................................... 88
Setting the audio jack used for TV audio input........................................................................................................ 100
Checking reception strength of each DAB channel label....................................................................................... 88
CONFIGURATIONS
Linking the standby modes of the unit and the TV................................................................................................ 100
Setting the use of ARC....................................................................................................................................................... 100
89
Setting the use of SCENE link playback....................................................................................................................... 101
Configuring the sound settings........................................................... 102
Configuring various functions (Setup menu)....................................... 89
Setting the broadening effect of the front sound field......................................................................................... 102
Basic operation of the Setup menu................................................................................................................................ 89
Adjusting the broadening effect of the center sound field................................................................................. 102
Setup menu items................................................................................................................................................................. 90
Adjusting the difference in level between the front and surround sound fields........................................ 102
Adjusting the center localization (broadening effect) of the front sound field........................................... 102
Setting the use of Monaural Mix.................................................................................................................................... 103
Setting the adjustment method of the Lipsync function..................................................................................... 103
Adjusting the delay of the Lipsync function............................................................................................................. 103
Adjusting the volume of dialogue sound.................................................................................................................. 103
Setting the scale of the volume display...................................................................................................................... 104
Setting the dynamic range adjustment method..................................................................................................... 104
Setting the limit value of the volume.......................................................................................................................... 104
Setting the initial volume for when the unit is turned on.................................................................................... 104
Adjusting the volume for Zone B in conjunction with the volume for Zone A............................................ 105
4
En
Configuring the power supply settings.............................................. 106
Configuring the advanced settings (ADVANCED SETUP menu)....... 117
Setting the amount of time for the auto-standby function................................................................................. 106
Basic operation of the ADVANCED SETUP menu..................................................................................................... 117
Setting the use of the eco mode................................................................................................................................... 106
ADVANCED SETUP menu items..................................................................................................................................... 117
Configuring the function settings....................................................... 107
Changing the speaker impedance setting (SP IMP.).............................................................................................. 118
Selecting the remote control ID (REMOTE ID).......................................................................................................... 118
Automatically changing the input source names displayed on the front display...................................... 107
Changing the FM/AM tuning frequency setting (TU)............................................................................................ 118
Manually changing the input source names displayed on the front display................................................ 107
Switching the video signal type (TV FORMAT)......................................................................................................... 118
Setting input sources to be skipped when operating the INPUT key.............................................................. 108
Selecting the HDMI 4K signal format (4K MODE).................................................................................................... 119
Adjusting the brightness of the front display........................................................................................................... 108
Backuping and restoring all the settings (BKUP/RSTR)......................................................................................... 119
Preventing accidental changes to the settings........................................................................................................ 108
Restoring the default settings (INIT)............................................................................................................................. 120
Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.................. 109
Updating the firmware (UPDATE)................................................................................................................................. 120
Configuring the network settings....................................................... 110
Checking the firmware version (VERSION)................................................................................................................. 120
Checking the network information of the unit........................................................................................................ 110
TROUBLESHOOTING
Setting the network connection method (Wired/Wireless)................................................................................ 110
Setting the network parameters automatically (DHCP)........................................................................................ 110
Setting the network parameters manually................................................................................................................ 111
121
When any problem appears................................................................. 121
Setting the MAC address filter........................................................................................................................................ 111
If trouble occurs, first check the following:................................................................................................................ 121
Setting the use of a Digital Media Controller............................................................................................................ 112
Power, system, or remote control trouble................................................................................................................. 121
Setting the use of the Network Standby function.................................................................................................. 112
Audio trouble....................................................................................................................................................................... 123
Setting the network name of the unit......................................................................................................................... 113
Video trouble........................................................................................................................................................................ 126
Setting the power interlock from the unit to MusicCast compatible devices.............................................. 113
FM/AM radio trouble (AM radio feature is available only on RX-V485)........................................................... 127
Updating the firmware via the network..................................................................................................................... 113
DAB radio trouble (RX-D485).......................................................................................................................................... 127
Configuring the Bluetooth® settings.................................................. 114
USB trouble........................................................................................................................................................................... 128
Setting the use of Bluetooth®......................................................................................................................................... 114
Network trouble.................................................................................................................................................................. 129
Terminating the connection between a Bluetooth® device and the unit...................................................... 114
Bluetooth® trouble.............................................................................................................................................................. 131
Setting the use of the Bluetooth® Standby function.............................................................................................. 114
Error indications on the front display................................................. 132
Setting the use of audio transmission to a Bluetooth® device........................................................................... 115
Error indications on the front display.......................................................................................................................... 132
Connecting the unit to a Bluetooth® device that receives transmitted audio............................................. 115
APPENDIX
Configuring the language settings..................................................... 116
Setting the on-screen menu language....................................................................................................................... 116
134
Updating the unit’s firmware via the network................................... 134
Firmware updates............................................................................................................................................................... 134
Updating the unit’s firmware via the network......................................................................................................... 135
Using wireless surround speakers (MusicCast Surround function)
................................................................................................................ 136
Using wireless surround speakers (MusicCast Surround function)................................................................... 136
5
En
Connecting to a network wirelessly.................................................... 138
Selecting a wireless network connection method.................................................................................................. 138
Setting up a wireless connection using the WPS button..................................................................................... 139
Setting up a wireless connection using an iOS device.......................................................................................... 139
Setting up a wireless connection by selecting from the list of available access points............................ 140
Setting up a wireless connection manually............................................................................................................... 141
Setting up a wireless connection by using the WPS PIN code........................................................................... 142
Input/output jacks and cables............................................................. 143
Video/audio jacks................................................................................................................................................................ 143
Video jacks............................................................................................................................................................................. 143
Audio jacks............................................................................................................................................................................ 143
Glossary................................................................................................. 144
Glossary of audio information........................................................................................................................................ 144
Glossary of HDMI and video information................................................................................................................... 145
Glossary of network information................................................................................................................................... 145
Glossary of Yamaha technologies................................................................................................................................. 145
Supported devices and file formats.................................................... 146
Supported Bluetooth® devices....................................................................................................................................... 146
Supported USB devices..................................................................................................................................................... 146
Supported AirPlay devices............................................................................................................................................... 146
Supported file formats...................................................................................................................................................... 147
Video signal flow.................................................................................. 147
Video signal flow................................................................................................................................................................. 147
Additional information on HDMI......................................................... 148
HDMI Control and synchronized operations............................................................................................................ 148
Audio Return Channel (ARC)........................................................................................................................................... 149
HDMI signal compatibility............................................................................................................................................... 150
Trademarks........................................................................................... 151
Trademarks............................................................................................................................................................................ 151
Specifications........................................................................................ 152
Specifications........................................................................................................................................................................ 152
Default settings.................................................................................... 157
Default settings of the Option menu........................................................................................................................... 157
Default settings of the Setup menu............................................................................................................................. 157
Default settings of the ADVANCED SETUP menu.................................................................................................... 158
6
En
BEFORE USING THE UNIT
How to use this manual
Checking the accessories
How to use this manual
Checking the accessories
When reading this manual, mind the following items.
Check that the following accessories are supplied with the product.
• The illustrations of the main unit used in this manual are of the RX-V485 (U.S.A.
model), unless otherwise specified.
£ AM antenna (RX-V485)
£ FM antenna (RX-V485)
• Some features are not available in certain regions.
• Due to product improvements, specifications and appearance are subject to
change without notice.
• This manual mainly explains operations using the menu displayed on the TV screen.
Operations with the TV screen menu are only available when your TV is connected
to the unit via HDMI.
• This manual explains operations using the supplied remote control.
• This manual describes all the “iPod touch”, “iPhone” and “iPad” as the “iPhone”.
“iPhone” refers to “iPod touch”, “iPhone” and “iPad”, unless otherwise specified.
WARNING:
* One of the above is supplied depending on
the region of purchase.
Indicates precautions for the possibility of death or serious injury.
£ DAB/FM antenna (RX-D485)
£ YPAO microphone
£ Remote control
£ Quick Start Guide
CAUTION:
Indicates precautions for the possibility of minor or moderate injury.
NOTICE:
Indicates precautions for use to avoid the possibility of malfunction/damage to the unit.
NOTE:
Indicates instructions and supplementary explanations for optimum use.
£ Batteries (AAA, R03, UM-4) (x2)
NOTE
Access the Yamaha Downloads site to download the latest Owner's Manual and Quick Start Guide.
http://download.yamaha.com/
7
En
Using the remote control
Insert the batteries in the remote control
Insert the batteries the right way round.
Operating range of the remote control
Point the remote control at the remote control sensor on the unit and remain within the
operating range shown in the following figure.
Within 6 m (20 ft)
30°
30°
8
En
FEATURES
What you can do with the unit
Supporting 2- to 5.1-channel
speaker system
Enjoying sound field effects with
much presence
Wide variety of supported
content via network
According to the number of speakers that you are
using, you can enjoy your favorite acoustic spaces in
various styles.
The unit is equipped with a variety of sound programs
and surround decoders that allow you to enjoy
playback sources with your favorite sound mode (such
as sound field effect or stereo playback).
When the unit is connected to a network, you can enjoy
the various kinds of content via network on the unit.
• “Enjoying 3D sound fields (CINEMA DSP
3D)” (p.38)
• “Playing back music stored on media servers (PCs/
NAS)” (p.69)
• “Using 5.1-channel system” (p.20)
• “Using 3.1-channel system” (p.21)
• “Using Virtual CINEMA FRONT” (p.22)
• “Playing back music in multiple rooms” (p.43)
• “Enjoying sound field effects optimized for the type of
content” (p.39)
Automatically optimizing the
speaker settings (YPAO)
• “Enjoying sound field effects without surround
speakers (Virtual CINEMA DSP)” (p.39)
YPAO function detects speaker connections, measures
the distances from them to your listening position by
using YPAO microphone measurement, and then
automatically optimizes the speaker settings, such as
volume balance and acoustic parameters, to suit your
room (YPAO: Yamaha Parametric room Acoustic
Optimizer).
• “Enjoying original sound (straight decode)” (p.40)
• “Optimizing the speaker settings automatically
(YPAO)” (p.33)
• “Playing back digitally compressed formats with
enriched sound (Compressed Music
Enhancer)” (p.42)
• “Enjoying surround sound with headphones (SILENT
CINEMA)” (p.39)
• “Enjoying multichannel playback without sound field
effects (surround decoder)” (p.40)
• “Enjoying pure high fidelity sound (direct
playback)” (p.41)
• “Enhancing the bass (Extra Bass)” (p.41)
• “Playback of iTunes/iPhone music contents with
AirPlay” (p.67)
• “Selecting an Internet radio station” (p.71)
• “Listening to a streaming service” (p.72)
Playing back content of various
devices
A number of HDMI jacks and various input/output jacks
on the unit allow you to connect video devices (such as
BD/DVD players), audio devices (such as CD players),
Bluetooth devices (such as smartphones), game
consoles, USB storage devices, and other devices. You
can play back content of them.
• “Selecting a frequency for reception” (p.51)
• “Playback Bluetooth® device music on the
unit” (p.65)
• “Playback of USB storage device contents” (p.68)
9
En
Useful functions
The unit is equipped with the various useful functions.
The SCENE function allows you to select the input
source and settings registered to the corresponding
scene, such as sound program and Compressed
Music Enhancer on/off, with just one touch. When the
unit is connected to an HDMI Control-compatible TV
with an HDMI cable, you can control the unit (such as
power and volume) with TV remote control operations.
• “Selecting the input source and favorite settings with
one touch (SCENE)” (p.73)
• “Registering a favorite content as shortcut” (p.75)
• “HDMI Control and synchronized
operations” (p.148)
• “Audio Return Channel (ARC)” (p.149)
Additional Features
The unit is equipped with the function connected with
speakers wirelessly. You can enjoy audio played back
on the unit using Bluetooth speakers/headphones.
Also, using devices that support the MusicCast
Surround function, the surround speakers and
subwoofer can be wireless.
• “Enjoying audio using Bluetooth® speakers/
headphones” (p.66)
Useful applications
Application: “AV SETUP GUIDE”
AV SETUP GUIDE is an application that assists
you with cable connections between AV Receiver
and playback devices as well as AV Receiver
setup. This app guides you through the various
settings such as speaker connections, TV and
playback device connections and selecting the
speaker system.
For details, search for “AV SETUP GUIDE” on the App
Store or Google Play.
Application: “AV CONTROLLER”
AV CONTROLLER is an application that assists
you with various operations of AV Receiver
without the remote control. This app allows you
not only to control the unit’s power and volume
but also to select the input source and start/stop
playback.
For details, search for “AV CONTROLLER” on the App
Store or Google Play.
• “Using wireless surround speakers (MusicCast
Surround function)” (p.136)
10
En
Application: "MusicCast
CONTROLLER"
MusicCast CONTROLLER is an application that
allows you to link a MusicCast compatible device
to other MusicCast compatible devices in other
rooms and play them back simultaneously. This
app lets you use your smartphone or other mobile
device instead of the remote control to easily
select music to play back as well as configure the
unit and MusicCast compatible devices.
For details, search for “MusicCast CONTROLLER” on
the App Store or Google Play.
Part names and functions
Part names and functions of the front panel
The part names and functions of the front panel are as follows.
1
3
2
4 5 6
7
8
9
0
A
DIRECT
YPAO MIC
INFO (WPS)
MEMORY
PRESET
FM
AM
TUNING
VOLUME
SCENE
BD
DVD
PHONES
INPUT
TONE CONTROL
NET
TV
STRAIGHT
PROGRAM
SILENT CINEMA
B
RADIO
AUX
USB
AUDIO
5V
(CONNECT)
C
D E F
G
H
1A
I
J
(RX-V485 U.S.A. model)
1 z (power) key
Turns on/off (standby) the unit.
2 Standby indicator
Lights up when the unit is in standby mode under any of
the following conditions.
• HDMI Control is enabled (p.99)
• Standby Through is enabled (p.99)
• Network Standby is enabled (p.112)
• Bluetooth Standby is enabled (p.114)
3 YPAO MIC jack
For connecting the supplied YPAO microphone (p.33).
4 Remote control sensor
Receives remote control signals (p.8).
9 TUNING keys
5 INFO (WPS) key
Selects the information displayed on the front display
(p.47).
Enters the wireless LAN connection setup (WPS button
configuration) by holding down for a few seconds (p.139).
6 MEMORY key
Registers radio stations as preset stations (p.52).
Registers Bluetooth, USB, or network content as a shortcut
by holding down for a few seconds (p.75).
Select the radio frequency (p.51).
: Front display
Displays information (p.13).
A DIRECT key
Enables/disables the direct playback mode (p.41).
B PHONES jack
For connecting headphones.
C INPUT keys
7 PRESET keys
Select a preset radio station (p.52).
Recall Bluetooth, USB, or network content that is registered
as a shortcut (p.76).
8 FM and AM keys (RX-V485) or FM and DAB keys (RXD485)
Switch between FM and AM (p.51) or FM and DAB
(p.57).
11
En
Select an input source.
D TONE CONTROL key
Adjusts the level of high-frequency range (Treble) and lowfrequency range (Bass) individually (p.79).
E SCENE keys
Switch with one touch between multiple settings set using
the SCENE function. Also, turns on the unit when it is in
standby mode (p.73).
F PROGRAM keys
Select a sound program or a surround decoder (p.38).
G STRAIGHT (CONNECT) key
Enables/disables the straight decode mode (p.40).
Enters the MusicCast network addition and the wireless
LAN setup by holding down for 5 seconds (p.37).
H AUX jack
For connecting devices, such as portable audio players
(p.26).
I USB jack
For connecting a USB storage device (p.68).
J VOLUME knob
Adjusts the volume.
12
En
Part names and functions of the front display
The part names and functions of the front display are as follows.
2
1
34
6
7
8 9
0
A
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A - DRC
LINK MASTER
OUT
5
2
ECO
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
B
D
C
1 HDMI
Lights up when HDMI signals are being input or output.
OUT
Lights up when HDMI signals are being output.
2 LINK MASTER
Lights up when the unit is the master device of the
MusicCast network.
3 Firmware update indicator
Lights up when a firmware update is available via the
network.
4 Bluetooth indicator
Light up while the unit is connected to a Bluetooth device.
5 CINEMA DSP
Lights up when CINEMA DSP 3D (p.38) is working.
6 SLEEP
Lights up when the sleep timer is on.
7 STEREO
Lights up when the unit is receiving a stereo FM radio
signal.
TUNED
Lights up when the unit is receiving an FM/AM radio station
(RX-V485) or FM radio station (RX-D485) signal.
8 ZONE indicators
Indicate the zone to which the sound is output (p.45).
E
F
9 A-DRC
C
G
H
G Speaker indicators
Lights up when Adaptive DRC (p.81) is working.
Indicate speaker terminals from which signals are output.
A Front speaker (L)
: Volume indicator
S Front speaker (R)
Indicates the current volume.
D Center speaker
A VIRTUAL
Lights up when the virtual processing (p.39) is working.
F Surround speaker (L)
G Surround speaker (R)
B ECO
Lights up when the eco mode (p.106) is enabled.
L Subwoofer
H MUTE
C Cursor indicators
Indicate the remote control cursor keys currently
operational.
D Information display
Displays the current status (such as input name and sound
mode name). You can switch the information by pressing
INFO (p.47).
E Wireless LAN indicator
Light up while the unit is connected to a wireless network
(p.138).
NOTE
This indicator may light up when the unit is added to the
MusicCast network. For details, see “Adding the unit to the
MusicCast network” (p.37).
F ENHANCER
Lights up when Compressed Music Enhancer (p.42) is
working.
13
En
Blinks when audio is temporarily muted.
Part names and functions of the rear panel
The part names and functions of the rear panel are as follows.
a
c
b
HDMI OUT
d
e
1
ARC
(BD/DVD)
2
FM
AUDIO 1
(TV)
3
ANTENNA
(RADIO)
f
NETWORK
HDMI (HDCP2.2)
(HDCP2.2)
a
(NET)
4
SPEAKERS
AM
75 Ω
OPTICAL
AUDI0 2
COAXIAL
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
SURROUND/BI-AMP
/ZONE B
CENTER
FRONT
COAXIAL
AUDI0 3
PRE OUT
SUBWOOFER
g
h
i
j
k
(RX-V485 U.S.A. model)
▪ The area around the video/audio output jacks is marked in white
on the actual product to prevent improper connections.
1 Wireless antennas
For a wireless (Wi-Fi) connection to a network (p.138) and
a Bluetooth connection (p.65).
2 HDMI OUT jack
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p.24). When using ARC, TV audio
signal can also be input through the HDMI OUT jack.
3 HDMI 1–4 jacks
For connecting to HDMI-compatible playback devices and
inputting video/audio signals (p.25).
4 ANTENNA jacks
For connecting to the radio antennas (p.27).
5 NETWORK jack
For a wired connection to a network (p.29).
6 Power cable
For connecting to an AC wall outlet (p.30).
7 AV jacks
AUDIO jacks
For connecting to video/audio playback devices and
inputting video/audio signals (p.25).
8 MONITOR OUT jack
For connecting to a TV and outputting video signals
(p.24).
9 SUBWOOFER PRE OUT jack
For connecting to a subwoofer (with built-in amplifier)
(p.19).
: SPEAKERS terminals
For connecting to speakers (p.16).
A VOLTAGE SELECTOR
(Taiwan, Brazil and Central and South America models
only)
Selects the switch position according to your local voltage
(p.30).
14
En
Part names and functions of the remote control
The part names and functions of the supplied remote control are as follows.
1
2
3
4
1 Remote control signal transmitter
Transmits infrared signals.
SLEEP
Mutes the audio output.
D OPTION key
3 SLEEP key
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
6
C MUTE key
Turns on/off (standby) the unit.
ZONE B
SCENE
5
Adjust the volume.
2 z (receiver power) key
ZONE A
Pressing this key repeatedly will specify the time (120 min,
90 min, 60 min, 30 min, off), in which the unit switches to
the standby mode.
4 ZONE switch
PROGRAM
Changes the zone that is controlled by the remote control
(p.44).
FM/AM
5 SCENE keys
USB
7
INPUT
VOLUME
B
MUTE
C
NET
BLUETOOTH
8
SETUP
OPTION
D
Switch with one touch between multiple settings set using
the SCENE function. Also, turn on the unit when it is in
standby mode (p.73).
6 Sound mode keys
Select a sound mode (p.38).
7 Input selection keys
Select an input source for playback.
NOTE
ENTER
9
Presses NET repeatedly to select a desired network source.
RETURN
TOP MENU
DISPLAY
HOME
POP-UP/MENU
8 SETUP key
Displays the setup menu (p.89).
9 Menu operation keys
0
RED
GREEN
BLUE
YELLOW
TUNING
Operates the menu.
9:ABC External device operation keys
MEMORY
A
E
TUNING
PRESET
Let you perform playback operations when “USB” or “NET”
is selected as the input source, or control playback of the
HDMI Control-compatible playback device.
NOTE
▪ The playback devices must support HDMI Control. Some
HDMI Control-compatible devices cannot be used.
▪ You can assign the unit's functions to the RED/GREEN/
YELLOW/BLUE keys (p.109).
A Playback operation keys
(RX-V485)
B VOLUME keys
Controls playback of the external device.
15
En
Displays the option menu (p.77).
E DISPLAY key
Turns on/off the browse screen, playback screen, etc.
PREPARATIONS
1 Connecting speakers
Names and functions of speakers
Speaker type
Front (L/R)
The names and functions of speakers connected to the unit are as follows.
Center
Surround (L/R)
Subwoofer
1
9
2
3
4
5
10° to 30°
10° to 30°
NOTE
Use this diagram as a reference for the ideal speaker layout for the unit. Your speaker layout does not need
to match the diagram exactly, since the YPAO function can be used to automatically optimize the speaker
settings (such as distances) to suit the actual speaker layout.
16
En
Abbr.
1/2
3
4/5
9
Function
Produce front channel sounds (stereo sounds).
Produces center channel sounds (such as movie dialogue
and vocals).
Produce surround channel sounds.
Produces LFE (low-frequency effect) channel sounds and
reinforces the bass parts of other channels.
Speaker systems and speakers to be connected
Speaker requirements
Select the speaker layout for the number of speakers that you are using and place the
speakers and subwoofer in your room.
Speakers and subwoofers to be connected to the unit must meet the following
requirements:
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When
connecting 6-ohm speakers, set the unit’s speaker impedance to “6 Ω MIN”. For
details, see the following:
– “Setting the speaker impedance” (p.18)
Speaker system
(the number of channels)
Speaker type
5.1
3.1
2.1
Front (L/R) 1/2



Center 3


Surround (L/R) 4/5

Subwoofer 9


• (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6 Ω.

• Use a subwoofer with built-in amplifier.
NOTE
▪ Prepare the number of speakers according to your speaker system.
▪ Be sure to connect the front left and right speakers.
17
En
Setting the speaker impedance
How to connect speakers
(U.S.A. and Canada models only)
n Connecting the speaker
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to “6 Ω MIN”.
1
2
Before connecting speakers, connect the power cable to an AC
wall outlet.
Connect a speaker cable between the negative (–) terminal of the unit and the
negative (–) terminal of the speaker, and between the positive (+) terminal of the unit
and the positive (+) unit of the speaker.
NOTICE
When connecting the speaker cables, take notice of the following:
While holding down STRAIGHT on the front panel, press z
(power).
▪ Prepare speaker cables in a place away from the unit, to avoid accidentally dropping wire strands into
the unit's interior which could result in a short circuit or malfunction of the unit.
z (power)
▪ Improper connecting of the speaker cables may cause a short circuit and also damage the unit or the
speakers.
– Twist the bare wires of the speaker cables firmly together.
STRAIGHT
3
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
SP IMP.••8¬MIN
4
5
– Do not let the bare wires of the speaker cable touch one another.
Check that “SP IMP.” is displayed on the front display.
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
Press STRAIGHT to select “6 Ω MIN”.
– Do not let the bare wires of the speaker cable come into contact with the unit’s metal parts (rear panel
and screws).
Press z (power) to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
Cable requirements
Use the following types of commercially-available cables to connect speakers to the
unit:
Speaker cables (the number of speakers
required)
+
–
Audio pin cable (for connecting a subwoofer)
+
–
18
En
NOTE
n Connecting the subwoofer
▪ Remove the unit’s power cable from an AC wall outlet before connecting the speakers.
▪ Be sure to connect the front left and right speakers.
Use an audio pin cable to connect the subwoofer.
▪ (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers,
set the unit’s speaker impedance to “6 Ω MIN”. For details, see the following:
NOTE
Unplug the power cables of the unit and subwoofer from the AC wall outlets before connecting the
subwoofer.
– “Setting the speaker impedance” (p.18)
1
2
3
4
Remove approximately 10 mm (3/8”) of insulation from the ends of
the speaker cable, and twist the bare wires of the cable firmly
together.
Audio pin cable
Loosen the speaker terminal.
Insert the bare wires of the cable into the gap on the side (upper
right or bottom left) of the terminal.
Tighten the terminal.
c
b
+ (red)
FR
ON
T
d
a
- (black)
This completes the connection.
NOTE
▪ If “Check SP Wires” appears on the front display when the unit is turned on, turn off the unit, and then
confirm that the speaker cables are not short circuited.
▪ (U.S.A., Canada, China, Taiwan, Brazil, Central and South America and General models only)
When using a banana plug, tighten the speaker terminal and insert a banana plug into the end of the
terminal.
a
FR
ON
T
Banana plug
b
19
En
AUDIO
3
How to place speakers (speaker systems)
n Using 5.1-channel system
This is a basic speaker layout recommended for enjoying surround sound.
1
9
2
3
4
5
10° to 30°
NETWORK
HDMI (HDCP2.2)
HDMI OUT
(HDCP2.2)
1
ARC
(BD/DVD)
2
FM
AUDIO 1
(TV)
ANTENNA
(RADIO)
10° to 30°
3
4
(NET)
SPEAKERS
AM
75 Ω
OPTICAL
AUDI0 2
COAXIAL
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
CENTER
SURROUND/BI-AMP
/ZONE B
COAXIAL
AUDI0 3
PRE OUT
SUBWOOFER
9
20
En
21 3 5 4
n Using 3.1-channel system
This is a speaker layout recommended for enjoying stereo sound with a center
speaker. Center channel sound such as movie dialogue and vocals can be clearly
obtained.
1
3
9
NETWORK
HDMI (HDCP2.2)
HDMI OUT
(HDCP2.2)
1
ARC
(BD/DVD)
2
FM
AUDIO 1
(TV)
ANTENNA
(RADIO)
2
3
4
(NET)
SPEAKERS
AM
75 Ω
OPTICAL
AUDI0 2
COAXIAL
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
CENTER
SURROUND/BI-AMP
/ZONE B
COAXIAL
AUDI0 3
PRE OUT
SUBWOOFER
9
21
En
21 3
n Using Virtual CINEMA FRONT
This speaker layout is recommended if you cannot place speakers in the back of the
room.
NOTE
To use Virtual CINEMA FRONT, the speaker configuration settings must be changed. For details, see the
following:
1
▪ “Assigning speaker configuration” (p.32)
2
4
▪ “Setting the use of Virtual CINEMA FRONT” (p.96)
3
9
NETWORK
HDMI (HDCP2.2)
HDMI OUT
(HDCP2.2)
1
ARC
(BD/DVD)
2
FM
AUDIO 1
(TV)
ANTENNA
(RADIO)
5
3
4
(NET)
SPEAKERS
AM
75 Ω
OPTICAL
AUDI0 2
COAXIAL
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
CENTER
SURROUND/BI-AMP
/ZONE B
COAXIAL
AUDI0 3
PRE OUT
SUBWOOFER
9
22
En
21 3 5 4
Connecting front speakers that support bi-amp
connections
The unit (rear)
SPEAKERS
You can connect the front speakers that support bi-amp connections.
To enable the bi-amp function, configure the necessary speaker settings. For details,
see the following:
• “Assigning speaker configuration” (p.32)
• “Setting your speaker system” (p.93)
NOTICE
▪ Before making bi-amp connections, remove any brackets or cables that connect a woofer with a
tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp
connections, make sure that the brackets or cables are connected before connecting the speaker
cables.
1
2
NOTE
▪ The following speakers cannot be connected simultaneously.
– Surround speakers
– Zone B speakers
– Bi-amp speakers
▪ The FRONT terminals and SURROUND/BI-AMP/ZONE B terminals output the same signals.
23
En
2 Connecting a TV
HDMI connection with a TV
VIDEO (composite video) connection with a TV
Connect a TV to the unit with an HDMI cable. If you connect a TV that supports ARC to
the unit, you can output video/audio to the TV or input TV audio to the unit.
Connect a TV to the unit with a video pin cable and a digital optical cable.
The unit (rear)
Video input
(composite video)
MONITOR OUT (VIDEO) jack
The unit (rear)
HDMI OUT jack
HDMI input
VIDEO
MONITOR OUT
HDMI OUT
HDMI OUT
(HDCP2.2)
HDMI (HDCP2.2)
2
(HDCP2.2)
1
ARC
(BD/DVD)
(NET)
4
HDMI
FM
AUDIO 1
(TV)
ANTENNA
(RADIO)
HDMI
HDMI
(ARC)
NETWORK
3
HDMI OUT
(HDCP2.2)
ARC
(NET)
4
(BD/DVD)
FM
AUDIO 1
(TV)
ANTENNA
(RADIO)
V
SPEAKERS
AM
75 Ω
OPTICAL
OPTICAL
AUDI0 2
AUDI0 2
COAXIAL
3
V
HDMI
SPEAKERS
AM
75 Ω
NETWORK
HDMI (HDCP2.2)
2
1
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
CENTER
COAXIAL
SURROUND/BI-AMP
/ZONE B
COAXIAL
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
CENTER
SURROUND/BI-AMP
/ZONE B
COAXIAL
AUDI0 3
AUDI0 3
PRE OUT
SUBWOOFER
PRE OUT
SUBWOOFER
OPTICAL
AUDIO 1
(TV)
O
O
OPTICAL
TV
TV
AUDIO 1 (OPTICAL) jack
Audio output
(digital optical)
NOTE
About Audio Return Channel (ARC)
▪ If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV. For details, see the following:
▪ ARC allows audio signals to travel both ways with a single HDMI cable. To use ARC, connect to the TV
using an HDMI cable that supports ARC.
– “Video signal flow” (p.147)
▪ Operations with TV screen are available only when your TV is connected to the unit via HDMI.
NOTE
▪ A digital optical cable connection allows audio from the TV to be played back on the unit. A digital optical
cable connection is not needed in the following case:
▪ If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control.
– If you will receive TV broadcasts only from the set-top box
▪ To use HDMI Control and ARC, you need to configure the HDMI settings on the unit. For details on the
settings, see the following:
– “HDMI Control and synchronized operations” (p.148)
– “Audio Return Channel (ARC)” (p.149)
▪ If your TV does not support Audio Return Channel (ARC), a digital optical cable connection between the
TV and the unit is needed.
24
En
3 Connecting playback devices
HDMI connection with a video device such as a
BD/DVD player
Output jacks on video device
Video
Input jacks on the unit
Audio
Digital coaxial
Connect a video device to the unit with an HDMI cable.
Composite video
HDMI 1–4 jacks
AV 1 (VIDEO + COAXIAL)
Analog stereo
AV 2–3 (VIDEO + AUDIO)
Digital optical
You need to change the combination
of video/audio input jacks (p.83).
Video output
(composite video)
AV 1–3 (VIDEO) jacks
The unit (rear)
AV 1
VIDEO
The unit (rear)
HDMI OUT
1
ARC
(BD/DVD)
3
(NET)
4
ANTENNA
(RADIO)
V
HDMI OUT jack
HDMI
FM
AUDIO 1
(TV)
VIDEO
NETWORK
HDMI (HDCP2.2)
2
(HDCP2.2)
HDMI OUT
SPEAKERS
AM
HDMI
75 Ω
NETWORK
HDMI (HDCP2.2)
2
(HDCP2.2)
1
ARC
(BD/DVD)
V
3
(NET)
4
OPTICAL
AUDI0 2
COAXIAL
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
HDMI
CENTER
FM
AUDIO 1
(TV)
SURROUND/BI-AMP
/ZONE B
ANTENNA
(RADIO)
SPEAKERS
AM
75 Ω
Video device
OPTICAL
AUDI0 2
COAXIAL
AUDI0 3
COAXIAL
PRE OUT
SUBWOOFER
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
CENTER
C
COAXIAL
AUDI0 3
SURROUND/BI-AMP
/ZONE B
C
COAXIAL
COAXIAL
PRE OUT
SUBWOOFER
Video device
L
L
L
R
R
R
NOTE
To watch video input to the HDMI 1–4 jacks, you need to connect your TV to the HDMI OUT jack of the unit.
For details, see the following:
AV 1 (COAXIAL) jack or AV 2–3
(AUDIO) jacks
▪ “HDMI connection with a TV” (p.24)
Audio output
(digital coaxial or analog
stereo)
NOTE
Connection other than HDMI with a playback device
▪ If you connect a video device to the unit via composite video connection, you need to connect your TV to
the MONITOR OUT (VIDEO) jack of the unit. For details, see the following:
n VIDEO (composite video) connection with a video
– “VIDEO (composite video) connection with a TV” (p.24)
▪ If the combination of video/audio input jacks available on the unit does not match your video device,
change its combination according to the output jacks of your device. For details, see the following:
device
Connect a video device to the unit with a video pin cable and an audio cable (digital
coaxial or stereo pin cable). Choose a set of input jacks (on the unit) depending on the
audio output jacks available on your video device.
25
– “Combining audio of another input source with video of the current input source” (p.83)
En
n AUDIO connection with an audio device such as a CD
Connecting to the jack on the front panel
player
Use the AUX jack on the front panel to temporarily connect devices such as portable
audio players to the unit.
Connect audio devices such as CD players and MD players to the unit. Depending on
the audio output jacks available on your audio device, choose one of the following
connections.
CAUTION
▪ Before making a connection, stop playback on the device and turn down the volume on the unit. The
volume may be unexpectedly loud, and this could result in damage to hearing.
NOTE
To use a turntable, a commercially-available phono equalizer amplifier is required. Connect the output of the
phono equalizer amplifier to the unit.
Audio output jacks on audio device
NOTE
You need to prepare the audio cable that matches the output jacks on your device.
Audio input jacks on the unit
Digital optical
AUDIO 1 (OPTICAL)
Digital coaxial
AUDIO 2 (COAXIAL)
AV 1 (COAXIAL)
BD
DVD
INPUT
AUDIO 3 (AUDIO)
AV 2–3 (AUDIO)
Analog stereo
NET
TV
TONE CONTROL
PROGRAM
RADIO
STRAIGHT
AUX
USB
AUDIO
5V
(CONNECT)
1A
The unit (rear)
The unit (front)
HDMI OUT
2
(HDCP2.2)
1
ARC
(BD/DVD)
75 Ω
OPTICAL
ANTENNA
(RADIO)
(NET)
4
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
O
OPTICAL
SPEAKERS
AUDI0 2
AM
COAXIAL
AUDI0 2
COAXIAL
NETWORK
O
OPTICAL
FM
AUDIO 1
(TV)
AUDIO 1
(TV)
3
HDMI (HDCP2.2)
C
C
COAXIAL
MONITOR OUT
FRONT
CENTER
SURROUND/BI-AMP
/ZONE B
L
Audio device
Portable audio player
COAXIAL
AUDI0 3
L
L
R
R
If you select “AUX” as the input source by pressing INPUT, the audio played back on
the device will be output from the unit.
PRE OUT
SUBWOOFER
R
AV 1–3 jacks
AUDIO 1–3 jacks
Audio output
(either digital optical, digital coaxial,
or analog stereo)
NOTE
“AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO 1
jacks, use “TV Audio Input” in the “Setup” menu to change the TV audio input assignment. To use the SCENE
function, you also need to change the input assignment for SCENE (TV). For details, see the following:
▪ “Setting the audio jack used for TV audio input” (p.100)
▪ “Registering a scene” (p.74)
26
En
4 Connecting the radio antennas
Assembling and connecting the AM antenna
Connecting the FM/AM antennas (RX-V485)
Connect the supplied FM/AM antennas to the unit.
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
FM antenna
AM antenna
HDMI OUT
1
ARC
(BD/DVD)
FM
AUDIO 1
(TV)
NETWORK
HDMI (HDCP2.2)
2
(HDCP2.2)
ANTENNA
(RADIO)
3
4
(NET)
SPEAKERS
AM
Hold down
75 Ω
OPTICAL
Insert
AUDI0 2
COAXIAL
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
CENTER
SURROUND/BI-AMP
/ZONE B
COAXIAL
AUDI0 3
PRE OUT
SUBWOOFER
NOTE
▪ Unwind only the length of cable needed from the AM antenna unit.
The unit (rear)
▪ The wires of the AM antenna have no polarity.
27
En
Release
Connecting the DAB/FM antenna (RX-D485)
Connect the supplied DAB/FM antenna to the unit and fix the antenna ends to a wall.
DAB/FM antenna
The unit (rear)
(HDCP2.2)
1
ARC
(BD/DVD)
AUDIO 1
(TV)
NETWORK
HDMI (HDCP2.2)
HDMI OUT
2
3
4
SPEAKERS
DAB/FM
75 Ω
ANTENNA
(NET)
(RADIO)
OPTICAL
AUDI0 2
COAXIAL
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
CENTER
SURROUND/BI-AMP
/ZONE B
COAXIAL
AUDI0 3
PRE OUT
SUBWOOFER
NOTE
▪ The antenna should be stretched out horizontally.
▪ If you cannot obtain good reception on the radio, adjust the height, direction or placement of the DAB/FM
antenna.
28
En
5 Preparing for connecting to a network
Preparing for connecting to a network
Network Attached Storage
(NAS)
Internet
The unit supports wired and wireless connections. Select a connection method
according to your network environment.
WAN
If you are using a router that supports DHCP in the wired connection, you do not need
to configure any network settings for the unit.
PC
LAN
Modem
NOTE
You need to configure the network settings if your router does not support DHCP or if you want to configure
the network parameters manually. For details, see the following:
▪ “Setting the network parameters manually” (p.111)
Wireless
router
Network cable
To connect the unit to a wireless network, select one of the following methods to
configure the wireless network settings.
l Method using the MusicCast setting
When adding the unit to the MusicCast network, you can also configure the unit’s
wireless network settings at once. If you use MusicCast CONTROLLER, we
recommend the wireless connection to MusicCast network. For details, see the
following:
– “Adding the unit to the MusicCast network” (p.37)
HDMI OUT
1
ARC
(BD/DVD)
2
FM
AUDIO 1
(TV)
NETWORK
HDMI (HDCP2.2)
(HDCP2.2)
ANTENNA
(RADIO)
3
(NET)
4
SPEAKERS
AM
75 Ω
OPTICAL
AUDI0 2
COAXIAL
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
CENTER
The unit (rear)
SURROUND/BI-AMP
/ZONE B
COAXIAL
NOTE
l Other methods
For details, see the following:
– “Selecting a wireless network connection method” (p.138)
AUDI0 3
PRE OUT
SUBWOOFER
▪ If you are using a router that supports DHCP, you do not need to configure any network settings for the
unit, as the network parameters (such as the IP address) will be assigned automatically to it. You only
need to configure the network settings if your router does not support DHCP or if you want to configure the
network parameters manually. For details, see the following:
Connecting a network cable (wired connection)
– “Setting the network parameters manually” (p.111)
▪ You can check whether the network parameters (such as IP address) are properly assigned to the unit.
For details, see the following:
Connect the unit to your router with a commercially-available STP network cable
(CAT-5 or higher straight cable).
– “Checking the network information of the unit” (p.110)
You can enjoy Internet radio or music files stored on media servers, such as PCs and
Network Attached Storage (NAS), on the unit.
29
En
Preparing wireless antennas (wireless connection)
6 Plugging in the power cable
Stand the wireless antennas upright for connecting to the wireless network or a
Bluetooth device wirelessly.
Plugging in the power cable
For information on how to connect the unit to a wireless network, see the following:
• “Preparing for connecting to a network” (p.29)
WARNING
(Taiwan, Brazil and Central and South America models only)
Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC wall
outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a potential
fire hazard.
Before plugging in the power cable
Set the switch position of VOLTAGE SELECTOR according to your local voltage. Voltages are AC 110–
120/220–240 V, 50/60 Hz.
The unit (rear)
NOTICE
NETWORK
HDMI (HDCP2.2)
HDMI OUT
(HDCP2.2)
1
ARC
(BD/DVD)
2
FM
AUDIO 1
(TV)
3
ANTENNA
(RADIO)
(NET)
4
VOLTAGE SELECTOR
SPEAKERS
AM
75 Ω
OPTICAL
AUDI0 2
▪ Do not apply excessive force on the wireless antenna. Doing so may damage the antenna.
COAXIAL
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
VOLTAGE SELECTOR
MONITOR OUT
CENTER
FRONT
SURROUND/BI-AMP
/ZONE B
110V
120V
COAXIAL
220V
240V
AUDI0 3
PRE OUT
SUBWOOFER
After all the connections are complete, plug in the power cable.
The unit (rear)
HDMI OUT
1
ARC
(BD/DVD)
3
(NET)
4
To an AC wall outlet
FM
AUDIO 1
(TV)
NETWORK
HDMI (HDCP2.2)
2
(HDCP2.2)
ANTENNA
(RADIO)
SPEAKERS
AM
75 Ω
OPTICAL
AUDI0 2
COAXIAL
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
COAXIAL
AUDI0 3
PRE OUT
SUBWOOFER
30
En
CENTER
SURROUND/BI-AMP
/ZONE B
7 Selecting the on-screen menu language
Selecting the on-screen menu language
6
This completes the necessary settings.
Select the desired on-screen menu language.
1
2
NOTE
Press z (receiver power) to turn on the unit.
The information on the front display is provided in English only.
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
NOTE
When you turn on the unit for the first time, a message regarding the network setup appears. You
can switch the language on this message screen.
3
4
5
To exit from the menu, press SETUP.
Press SETUP.
Use the cursor keys to select “Language” and press ENTER.
Use the cursor keys to select the desired language.
31
En
8 Configuring the necessary speaker settings
Assigning speaker configuration
6
If you use any of the following speaker configurations, perform the following procedure
to configure the corresponding speaker settings manually before performing YPAO.
• Using the bi-amp connection (playing back more high-quality sounds with bi-amp
connections)
• Using the surround speakers for front 5.1-channel system (Virtual CINEMA FRONT)
NOTE
For details on the speaker configurations, see the following:
7
▪ “Connecting front speakers that support bi-amp connections” (p.23)
▪ “Playing back music in multiple rooms” (p.43)
To exit from the menu, press SETUP.
This completes the speaker settings.
▪ “Using Virtual CINEMA FRONT” (p.22)
Press z (receiver power) to turn on the unit.
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
NOTE
If you turn on the unit for the first time, the message regarding the network setup appears. For now,
press RETURN and proceed to Step 3.
3
4
5
▪ Using bi-amp connections or Zone B speakers, select your speaker
system in “Power Amp Assign”. For details, see the following:
– “Setting your speaker system” (p.93)
▪ Using the surround speakers for front 5.1-channel system (Virtual
CINEMA FRONT), select “On” in “Virtual CINEMA FRONT”. For details,
see the following:
– “Setting the use of Virtual CINEMA FRONT” (p.96)
• Using the Zone B speakers
1
2
Configure the corresponding speaker settings.
Press SETUP.
Use the cursor keys to select “Speaker” and press ENTER.
Use the cursor keys to select “Configuration” and press ENTER.
32
En
Optimizing the speaker settings automatically
(YPAO)
4
Place the YPAO microphone at your listening position and
connect it to the YPAO MIC jack on the front panel.
Place the YPAO microphone at your listening position (same height as
your ears). We recommend the use of a tripod as a microphone stand.
You can use the tripod screws to stabilize the microphone.
The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker
connections, measures the distances from them to your listening position(s), and then
automatically optimizes the speaker settings, such as volume balance and acoustic
parameters, to suit your room.
The unit (front)
NOTE
▪ Use YPAO after connecting a TV and speakers to the unit.
▪ Configure the corresponding speaker settings manually before performing YPAO. For details on the
settings, see the following:
– “Assigning speaker configuration” (p.32)
1
▪ During the measuring process, test tones are output at high volume, and you cannot adjust the volume.
▪ During the measuring process, keep the room as quiet as possible and do not stand between the
speakers and the YPAO microphone for accurate measurement.
9
▪ Do not connect headphones.
1
2
3
2
3
Press z (receiver power) to turn on the unit.
4
5
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
Turn on the subwoofer and set the volume to half. If the crossover
frequency is adjustable, set it to maximum.
VOLUME
MIN
MAX
CROSSOVER/
HIGH CUT
MIN
Ear height
The following screen appears on the TV.
9
MAX
1
1
33
En
Setting of “Power Amp Assign” in the “Setup” menu
5
7
To start the measurement, use the cursor keys to select “Start”
and press ENTER.
Use the cursor keys to select “SAVE” and press ENTER.
The measurement will start in 10 seconds. Press ENTER to start the
measurement immediately.
The following screen appears on the TV when the measurement finishes.
The adjusted speaker settings are applied.
NOTE
1
To finish the measurement without applying the result, select “CANCEL”.
2
8
3
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
NOTICE
4
1
The number of speakers (front side/rear side/subwoofer)
2
Speaker distance (nearest/farthest)
3
Adjustment range of speaker output level
4
Warning message (if available)
▪ The YPAO microphone is sensitive to heat, so should not be placed anywhere where it could be
exposed to direct sunlight or high temperatures (such as on top of AV equipment).
NOTE
▪ To stop the measurement temporarily, press RETURN.
▪ If any error message (such as E-1) or warning message (such as W-1) appears, see the
following:
– “Error messages from YPAO” (p.35)
– “Warning messages from YPAO” (p.36)
▪ A speaker with a problem is indicated by blinking of the speaker indicators in the front display.
▪ If multiple warnings are given (when operating with the front display), use the cursor keys to
check the other warning messages.
6
Confirm the results displayed on the screen and press ENTER.
34
En
Error messages from YPAO
Error message
Cause
E-1:No Front SP
Front speakers are not
detected.
(E-1:NO FRNT SP)
If any error message is displayed during the measurement, resolve the problem and
perform YPAO again.
E-2:No Sur. SP
(E-2:NO SUR SP)
E-5:Noisy
(E-5:NOISY)
Error message
E-7:No MIC
(E-7:NO MIC)
E-8:No Signal
(E-8:NO SIGNAL)
TV screen
LINK MASTER
OUT
2
ECO
E-9:User Cancel
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
E-5:NOISY
E-9:CANCEL
(E-9:CANCEL)
One of the surround
speakers cannot be
detected.
E-10:Internal Err.
Front display
(E-10:INTERNAL)
Exit YPAO, turn off the unit, and then
check the speaker connections.
The noise is too loud.
Keep the room quiet and retry YPAO. If
you select “PROCEED”, YPAO takes the
measurement again and ignores any
noise detected.
The YPAO microphone has
been removed.
Connect the YPAO microphone to the
YPAO MIC jack firmly and retry YPAO.
The YPAO microphone
cannot detect test tones.
Connect the YPAO microphone to the
YPAO MIC jack firmly and retry YPAO. If
this error occurs repeatedly, contact the
nearest authorized Yamaha dealer or
service center.
The measurement has been
Retry or exit YPAO as necessary.
canceled.
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Remedy
An internal error has
occurred.
Exit YPAO, and turn off and on the unit. If
this error occurs repeatedly, contact the
nearest authorized Yamaha dealer or
service center.
NOTE
▪ Text in parentheses denotes indicators on the front display.
▪ To exit the YPAO measurement for resolving the problem, use the cursor keys to select “EXIT” and press
ENTER.
▪ For the error messages E-5 and E-9 only, you can proceed with the current YPAO measurement. Press
ENTER, and then use the cursor keys to select “PROCEED” and press ENTER.
▪ To retry the YPAO measurement from beginning, press ENTER, and then use the cursor keys to select
“RETRY” and press ENTER.
35
En
Warning messages from YPAO
Warning message
Cause
Remedy
Check the cable connections (+/-) of the
problem speaker.
If a warning message is displayed after the measurement, you can still apply the
measurement results by following on-screen instructions.
If the speaker is connected incorrectly:
However, we recommend you perform YPAO again in order to use the unit with the
optimal speaker settings.
W-1:Out of Phase
(W-1:PHASE)
A speaker cable may be
connected with the reverse
polarity (+/-).
Turn off the unit, reconnect the speaker
cable.
If the speaker is connected correctly:
Depending on the type of speakers or
room environment, this message may
appear even if the speakers are
connected correctly. In this case, you
can ignore the message.
W-2:Over Distance
(W-2:DISTANCE)
Warning message
W-3:Level Error
TV screen
(W-3:LEVEL)
Problem speaker (blinks)
LINK MASTER
OUT
2
ECO
W-1:PHASE
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
A speaker is placed more
than 24 m (80 ft) from the
listening position.
Check the usage environment and cable
connections (+/-) of each speaker, and
the volume of the subwoofer. If there is
There are significant volume any problem, exit YPAO, turn off the unit,
differences between the
and then reconnect speaker cable or
speakers.
correct the speaker positions. We
recommend using the same speakers or
speakers with specifications that are as
similar as possible.
NOTE
Front display
Text in parentheses denotes indicators on the front display.
36
En
Exit YPAO, turn off the unit, and place the
problem speaker within 24 m (80 ft) of the
listening position.
9 Setting MusicCast
What is MusicCast
2
MusicCast is a brand new wireless musical solution from Yamaha, allowing you to
share music among all of your rooms with a variety of devices. You can enjoy music
from your smartphone, PC, NAS drive and music streaming service anywhere in your
house with one easy-to-use application. For more details and a lineup of MusicCast
compatible products, refer to the following site:
http://www.yamaha.com/musiccast/
• Seamlessly control all MusicCast compatible devices with the dedicated application
“MusicCast CONTROLLER”.
CONNECT
• Link a MusicCast compatible device to another device in a different room and play
them back simultaneously.
3
• Play back music from music streaming services. (The compatible music streaming
services may differ depending on your region and product).
Operate the “MusicCast CONTROLLER” application following the
onscreen instructions to set up the network.
This completes adding the unit to the MusicCast network and the network settings.
• Configure wireless network settings of MusicCast compatible devices.
NOTE
▪ AirPlay and DSD audio cannot be delivered.
Using MusicCast CONTROLLER
▪ When the direct playback mode is enabled, input sources other than the network sources, Bluetooth and
USB cannot be delivered.
To use the network features on the MusicCast compatible device, you need the
dedicated application “MusicCast CONTROLLER” for the operation. Search for the
free application “MusicCast CONTROLLER” on the App Store or Google Play and
install it to your device.
▪ If you configure the unit's wireless settings with this method, the wireless LAN indicator of the front display
lights up when the unit is connecting to a network (even if a wired connection is used).
▪ You can interlock the power of MusicCast devices with the power of the unit (the MusicCast master). For
details on the settings, see the following:
– “Setting the power interlock from the unit to MusicCast compatible devices” (p.113)
Adding the unit to the MusicCast network
Perform the following procedure to add the unit to the MusicCast network. You can
also configure the unit’s wireless network settings at once.
NOTE
The SSID and security key for your network will be needed.
1
Operate the “MusicCast CONTROLLER” application following the
on screen instructions, then hold down CONNECT on the front
panel of the unit for 5 seconds.
Tap the “MusicCast CONTROLLER” application icon on your
mobile device and tap “Setup”.
NOTE
If you have already connected other MusicCast compatible devices to the network, tap “Settings”
and then “Add New Device”.
37
En
ENJOYING SOUND
Enjoying sound field effects
Enjoying 3D sound fields (CINEMA DSP 3D)
Select your favorite sound mode
The unit is equipped with a variety of sound programs and surround decoders that
allow you to enjoy playback sources with your favorite sound mode (such as sound
field effect or stereo playback).
ZONE A
The unit is equipped with a variety of sound programs that utilize Yamaha's original
DSP technology (CINEMA DSP 3D). It allows you to easily create sound fields like
actual movie theaters or concert halls in your room and enjoy natural threedimensional sound fields.
ZONE B
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
PROGRAM
ZONE A
FM/AM
Sound program category
ZONE B
USB
INPUT
SLEEP
VOLUME
NET
“CINEMA DSP” lights up
BLUETOOTH
SCENE
MUTE
SETUP
OPTION
BD
DVD
TV
NET
LINK MASTER
RADIO
OUT
RETURN
TOP MENU
RED
DISPLAY
HOME
GREEN
YELLOW
BLUE
TUNING
PRESET
STRAIGHT
DIRECT
ENHANCER
POP-UP/MENU
MEMORY
TUNING
2
ECO
ENTER
PROGRAM
BASS
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
Sci-Fi
STRAIGHT
DIRECT
ENHANCER
BASS
PROGRAM
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Sound program
NOTE
▪ You can adjust the sound field effect level. For details, see the following:
– “Adjusting the sound field effect level” (p.81)
NOTE
▪ The sound mode can be applied separately to each input source.
▪ The sound mode can be applied separately to each input source.
▪ You can check which speakers are currently outputting sound by looking at the speaker indicators on the
front display.
▪ You can assign the unit's functions of sound mode to the RED/GREEN/YELLOW/BLUE keys of the remote
control. For details, see the following:
– “Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control” (p.109)
38
En
Enjoying sound field effects optimized for the type of
content
Enjoying surround sound with 5 speakers placed in
front (Virtual CINEMA FRONT)
The unit is equipped with a variety of sound programs.
You can enjoy the surround sound even when the surround speakers are placed in
front.
You can enjoy playback sources with your favorite sound mode, such as with a sound
field effect added or with stereo playback.
When “Virtual CINEMA FRONT” in the “Setup” menu is set to “On”, the unit creates the
virtual surround speakers in the rear side to allow you to enjoy multichannel surround
sound with the 5 speakers placed in the front.
• We recommend a sound program in the “MOVIE” category to enjoy video content.
• We recommend a sound program in the “MUSIC” category to enjoy music content.
NOTE
• We recommend a sound program in the “STEREO” category to enjoy stereo
playback.
▪ For details on the settings, see the following:
– “Setting the use of Virtual CINEMA FRONT” (p.96)
For details on the sound programs, see the following:
▪ When Virtual CINEMA FRONT is working, “VIRTUAL” lights up on the front display.
• “Selecting sound programs” (p.79)
Enjoying surround sound with headphones (SILENT
CINEMA)
NOTE
You can select a sound program by pressing PROGRAM.
Enjoying sound field effects without surround
speakers (Virtual CINEMA DSP)
You can enjoy surround or sound field effects, like a multichannel speaker system, with
stereo headphones by connecting the headphones to the PHONES jack and selecting
a sound program or a surround decoder.
If you select one of the sound programs (except 2ch Stereo and 5ch Stereo) when no
surround speakers are connected, the unit automatically creates the surround sound
field using the front speakers.
NOTE
When Virtual CINEMA DSP is working, “VIRTUAL” lights up on the front display.
39
En
Enjoying unprocessed playback
NOTE
Enjoying original sound (straight decode)
▪ You cannot change the previously selected surround decoder by pressing PROGRAM. To change it, use
“Sur.Decode” in the “Option” menu. For details, see the following:
When STRAIGHT is pressed and the straight decode mode is enabled, the unit
produces stereo sound from the front speakers for 2-channel sources such as CDs,
and produces unprocessed multichannel sounds for multichannel sources.
– “Glossary of audio decoding format” (p.144)
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
– “Selecting the surround decoder used in the program” (p.81)
▪ For details on each decoder, see the following:
2
ECO
▪ You can adjust the surround decoder parameters in “DSP Parameter” in the “Setup” menu. For details,
see the following:
VOL. MUTE VIRTUAL
STRAIGHT
FPL
FPR
SL
SW
SR
SBL SB SBR
Each time you press the key, the straight decode mode is enabled or disabled.
– “Setting the broadening effect of the front sound field” (p.102)
Enjoying multichannel playback without sound field
effects (surround decoder)
– “Adjusting the difference in level between the front and surround sound fields” (p.102)
– “Adjusting the broadening effect of the center sound field” (p.102)
– “Adjusting the center localization (broadening effect) of the front sound field” (p.102)
Press PROGRAM to select “Sur.Decode”. The previously selected surround decoder is
selected. The surround decoder enables multichannel playback from 2-channel
sources without sound field effects.
ZONE A
ZONE B
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
PROGRAM
ZONE A
FM/AM
ZONE B
USB
INPUT
SLEEP
VOLUME
NET
BLUETOOTH
SCENE
MUTE
SETUP
OPTION
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
ENTER
RETURN
DISPLAY
TOP MENU
RED
POP-UP/MENU
HOME
GREEN
YELLOW
BLUE
PROGRAM
MEMORY
TUNING
PROGRAM
TUNING
PRESET
“SUR. DECODE” appears
LINK MASTER
OUT
ECO
2
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
DPL Movie
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
40
En
Enjoying pure high fidelity sound (direct playback)
Enjoying enhanced bass sound
When DIRECT is pressed and the direct playback mode is enabled, the unit plays
back the selected source with the least circuitry. It allows you to enjoy Hi-Fi sound
quality.
Enhancing the bass (Extra Bass)
OUT
Press BASS to enable Extra Bass and enjoy enhanced bass sound, regardless of the
size of the front speakers and the presence or absence of a subwoofer.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
2
ECO
DIRECT
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Each time you press the key, Extra Bass is enabled or disabled.
Each time you press the key, the direct playback mode is enabled or disabled.
NOTE
NOTE
You can also use “Extra Bass” in the “Setup” menu to enable/disable Extra Bass. For details, see the
following:
▪ When the direct playback mode is enabled, the following functions are not available.
– Selecting sound programs
▪ “Setting the use of Extra Bass” (p.96)
– Using the Zone B function
– Adjusting the tone control
– Operating the on-screen “Setup” and “Option” menus
– Viewing information on the front display (when not in operation)
▪ When the direct playback mode is enabled, the front display may become dark.
41
En
Enjoying enhanced compressed music
Playing back digitally compressed formats with
enriched sound (Compressed Music Enhancer)
Press ENHANCER to enable Compressed Music Enhancer and add depth and
breadth to the sound, allowing you to enjoy a dynamic sound close to the original
sound before it was compressed. This function can be used along with any other
sound modes.
“ENHANCER” lights up
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
Enhancer On
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Each time you press the key, Compressed Music Enhancer is enabled or disabled.
NOTE
▪ Compressed Music Enhancer does not work on the following audio sources.
– Signals whose sampling frequency is over 48 kHz
– DSD audio
▪ You can also use “Enhancer” in the “Option” menu to enable/disable Compressed Music Enhancer. For
details, see the following:
– “Setting Compressed Music Enhancer” (p.82)
42
En
Enjoying music in multiple rooms
Playing back music in multiple rooms
NOTICE
▪ Remove the unit’s power cable from the AC wall outlet before connecting speakers.
The Zone A/B function allows you to play back an input source in the room where the
unit is installed (Zone A) and in another room (Zone B).
For example, you can turn on Zone A (turn off Zone B) when you are in the living room,
and turn on Zone B (turn off Zone A) when you are in the study room. Also, you can
turn on both zones when you want to enjoy the same input source in those rooms
simultaneously.
▪ Ensure that the bare wires of the speaker cable do not touch one another or come into contact with the
unit’s metal parts. Doing so may damage the unit or the speakers. If the speaker cables short circuit,
“Check SP Wires” will appear on the front display when the unit is turned on.
Connect the speakers placed in Zone B to the unit with speaker cables.
To utilize the SURROUND/BI-AMP/ZONE B terminals for Zone B speakers, set “Power
Amp Assign” in the “Setup” menu to “Zone B” after connecting the power cable to an
AC wall outlet. For details, see the following:
• “Setting your speaker system” (p.93)
The unit (rear)
SPEAKERS
Study room (Zone B)
Living room (Zone A)
1
NOTE
1
▪ Multichannel sources are mixed down to 2 channels and output to the Zone B.
▪ The same input source is applied to both Zone A and Zone B.
9
2
2
3
▪ By default, the volume for Zone B changes in conjunction with the volume for Zone A. If there is volume
difference between Zone A/B, you can correct it, and also you can adjust the volume for Zone B
separately. For details, see the following:
– “Correcting volume difference between Zone A and Zone B” (p.45)
Zone B
– “Adjusting the volume for Zone B separately” (p.45)
▪ You can automatically enable/disable the audio output to Zone A/B in conjunction with a scene selection.
For details, see the following:
Zone A
– “Registering a scene” (p.74)
NOTE
Connecting Zone B speakers
The following speakers cannot be connected simultaneously.
▪ Zone B speakers
Connect the device that will be used in Zone B to the unit.
▪ Bi-amp speakers
43
En
Operating the Zone B
3
Basic procedure for playing back music in Zone B is as follows.
Use the input selection keys to select an input source.
ZONE A
ZONE B
SLEEP
SCENE
1
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
Slide the Zone switch to “ZONE B”.
PROGRAM
PROGRAM
FM/AM
USB
INPUT
VOLUME
NET
ZONE A
ZONE B
FM/AM
BLUETOOTH
SLEEP
MUTE
SCENE
BD
DVD
NET
TV
RADIO
SETUP
STRAIGHT
DIRECT
ENHANCER
BASS
PROGRAM
INPUT
ENTER
ZONE A
FM/AM
ZONE B
RETURN
USB
INPUT
USB
OPTION
TOP MENU
SLEEP
VOLUME
DISPLAY
HOME
VOLUME
Input selection keys
NET
POP-UP/MENU
NET
RED
GREEN
YELLOW
BLUE
BLUETOOTH
SCENE
MUTE
OPTION
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
ENTER
RETURN
DISPLAY
TOP MENU
RED
HOME
GREEN
YELLOW
ZONE A
ZONE B
TUNING
PRESET
MUTE
POP-UP/MENU
BLUE
PROGRAM
MEMORY
TUNING
BLUETOOTH
MEMORY
TUNING
SETUP
NOTE
TUNING
PRESET
The same input source is applied to both Zone A and Zone B.
2
4
Press z (receiver power).
Each time you press the key, the ZONE B audio output is on or off.
“ZONE B” lights up
STEREO TUNED ZONE
SLEEP PARTY
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
HDMI1
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
44
En
Start playback on the external device or select a radio station.
Adjusting the volume for Zone B separately
Correcting volume difference between Zone A and
Zone B
You can separately adjust the volume for Zone B using the remote control.
NOTE
If you are bothered by volume difference between Zone A/B, perform the following
procedure to adjust the volume for Zone B.
Slide the Zone switch to “ZONE A” in menu operations.
NOTE
1
2
3
4
5
Slide the Zone switch to “ZONE A” in menu operations.
1
2
3
Press OPTION.
Use the cursor keys to select “Volume Trim” and press ENTER.
Use the cursor keys to select “ZoneB Trim” and adjust the setting.
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
4
Press SETUP.
Use the cursor keys to select “Sound” and press ENTER.
Use the cursor keys to select “Volume” and press ENTER.
Use the cursor keys to select “ZoneB Volume” .
Use the cursor keys to select “Async.” and press ENTER.
NOTE
When “ZoneB Volume” is set to “Async.”, the volume for Zone B is temporarily set to -40 dB.
Press OPTION.
6
7
8
This completes the settings.
NOTE
This setting is not effective when “ZoneB Volume” in the “Setup” menu is set to “Async.”. For details, see the
following:
▪ “Adjusting the volume for Zone B in conjunction with the volume for Zone A” (p.105)
Press SETUP.
Slide the Zone switch to “ZONE B”.
Press VOLUME to adjust the volume for Zone B.
NOTE
To mute the audio output to Zone B, press MUTE.
45
En
PLAYBACK
Basic playback procedure
Basic procedure for playing back video and music
3
4
Basic procedure for playing back video and music is as follows.
1
2
Turn on the external devices (such as a TV or BD/DVD player)
connected to the unit.
▪ To mute the audio output, press MUTE. Press MUTE again to unmute.
▪ Refer to the instruction manual for the external device.
ZONE B
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
PROGRAM
PROGRAM
FM/AM
Input selection keys
USB
INPUT
VOLUME
NET
FM/AM
BLUETOOTH
MUTE
SETUP
TOP MENU
RED
USB
OPTION
INPUT
ENTER
RETURN
DISPLAY
HOME
GREEN
YELLOW
VOLUME
VOLUME
NET
POP-UP/MENU
BLUE
BLUETOOTH
MEMORY
TUNING
TUNING
PRESET
MUTE
Press VOLUME to adjust the volume.
NOTE
Use the input selection keys to select an input source.
ZONE A
Start playback on the external device or select a radio station.
MUTE
46
En
Switching information on the front display
Currently input source
AV
Press INFO on the front panel to select between the various display items on the front
display, as shown in the following table.
OUT
AUX
2
Audio Decoder
Bluetooth
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
USB
Item
SERVER
About 3 seconds after a display item is selected, its corresponding information
appears.
OUT
AirPlay
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
2
ECO
DPL Movie
Input (input source name), DSP Program (sound mode name), Audio
Decoder (decoder name*)
AUDIO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
ECO
Displayed item
HDMI
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Information
Song (song title), Artist (artist name), Album (album name), DSP
Program (sound mode name), Audio Decoder (decoder name*)
Song (song title), Artist (artist name), Album (album name), DSP
Program (sound mode name), Audio Decoder (decoder name*), IP
Address, Ethernet MAC, Wi-Fi MAC
NET RADIO
Song (song title), Album (album name), Station (station name), DSP
Program (sound mode name), Audio Decoder (decoder name*), IP
Address, Ethernet MAC, Wi-Fi MAC
MusicCast Link
DSP Program (sound mode name), Audio Decoder (decoder name*),
IP Address, Ethernet MAC, Wi-Fi MAC
Frequency (frequency), DSP Program (sound mode name), Audio
Decoder (decoder name*)
TUNER (FM/AM)
(U.K., Europe, Russia and Middle East models only)
Radio Data System data is also available when the unit is tuned into a
Radio Data System broadcasting station. For details, see the
following:
• “Displaying the Radio Data System information” (p.54)
(RX-D485 only)
TUNER (DAB)
For details, see the following:
• “Displaying the DAB information” (p.59)
* The name of the audio decoder currently activated is displayed. If no audio decoder
is activated, “Decoder Off” appears.
NOTE
Available items vary depending on the selected input source. The displayed item can also be applied
separately to each input group which is shown in the table and divided by ruled lines.
47
En
Item names and functions of the playback screen
External device
operation keys
The item names and functions of the playback screen, available when your TV is
connected to the unit via HDMI, are as follows.
a
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
f
1
Function
g
Skips forward/backward.
NOTE
Displayed items vary depending on the content of playback.
2
1
Status indicators
Display the current shuffle/repeat settings and playback status (such as play/
pause).
2
Playback information
Displays the artist name, album name, song title, and elapsed time.
Use the following remote control keys to control playback.
ZONE A
ZONE B
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
TOP MENU
HOME
POP UP/MENU
PROGRAM
FM/AM
USB
INPUT
VOLUME
RED
GREEN
YELL
YELLOW
BLUE
NET
BLUETOOTH
MEMORY
MUTE
SETUP
RETURN
TOP MENU
External device operation
keys
OPTION
ENTER
TUNING
TUNING
DISPLAY
HOME
POP-UP/MENU
PRESET
RED
GREEN
YELLOW
BLUE
MEMORY
TUNING
TUNING
PRESET
48
En
Item names and functions of the browse screen
Icon
Function
Moves 10 pages backward.
The item names and functions of the browse screen, available when your TV is
connected to the unit via HDMI, are as follows. The browse screen appears when the
next input source is selected.
Moves to the previous page of the list.
Moves to the next page of the list.
• USB
Moves 10 pages forward.
• SERVER
Moves to the playback screen.
• NET RADIO
1
NOTE
4
▪ Displayed items vary depending on the content of playback.
▪ A content selected by the cursor is displayed on the front display.
5
2
3
1
2
List name
Contents list
Displays the list of contents. Use the cursor keys to select an item and press ENTER
to confirm the selection.
3
4
Item number/total
Status indicators
Display the current shuffle/repeat settings and playback status (such as play/
pause).
5
Operation menu
Use the cursor keys to select an item. Press ENTER to confirm the selection.
49
En
Listening to FM/AM radio (RX-V485)
Setting the frequency steps
4
5
(Asia, Taiwan, Brazil, General, and Central and South America models only)
At the factory, the frequency step setting is set to 50 kHz for FM and 9 kHz for AM.
Depending on your country or region, set the frequency steps to 100 kHz for FM and
10 kHz for AM.
1
2
When holding down STRAIGHT on the front panel, press z
(power).
z (power)
3
STRAIGHT
Press PROGRAM to select “TU”.
LINK MASTER
OUT
ECO
2
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
TU••••FM50/AM9
Press z (power) to set the unit to standby mode and turn it on
again.
This completes the settings.
Set the unit to standby mode.
PROGRAM
Press STRAIGHT to select “FM100/AM10”.
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
50
En
Selecting a frequency for reception
2
You can tune into a radio station by specifying its frequency.
Press TUNING to set a frequency.
Hold down the key for about a second to search stations automatically.
NOTE
ZONE A
ZONE B
SLEEP
SCENE
The radio frequencies differ depending on the country or region where the unit is being used. The explanation
of this section uses a display with frequencies used in U.K. and Europe models.
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
TOP MENU
HOME
POP UP/MENU
PROGRAM
FM/AM
1
USB
INPUT
VOLUME
RED
GREEN
YELL
YELLOW
BLUE
NET
Press FM/AM to select “TUNER” as the input source.
TUNING
BLUETOOTH
MEMORY
MUTE
SETUP
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
OPTION
ENTER
RETURN
TUNING
TUNING
DISPLAY
TOP MENU
HOME
POP-UP/MENU
PRESET
RED
GREEN
YELLOW
BLUE
MEMORY
LINK MASTER
OUT
ECO
2
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
FM 87.50MHz
TUNING
TUNING
PRESET
VOL. MUTE VIRTUAL
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
FM 98.50MHz
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
On the front display, “TUNED” lights up when the unit is receiving an
FM/AM radio station signal.
“STEREO” lights up when the unit is receiving a stereo FM radio signal.
NOTE
You can watch videos input from external devices while listening to radio. For details, see the
following:
▪ “Selecting a video source to be output with the selected audio source” (p.84)
51
En
Selecting a preset station
1
Tune into a registered radio station by selecting its preset number.
1
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
Press FM/AM to select “TUNER” as the input source.
2
3
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
2
Press FM/AM to select “TUNER” as the input source.
Press PRESET to select the desired radio station.
Press OPTION.
Use the cursor keys to select “Preset” and press ENTER.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
ZONE A
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
TOP MENU
HOME
POP UP/MENU
FM/AM
INPUT
VOLUME
RED
GREEN
YELL
YELLOW
FPL
FPR
SW
SR
SL
SBL SB SBR
The preset number from which to start the registration is displayed on the
front display.
PROGRAM
USB
VOL. MUTE VIRTUAL
Preset
ZONE B
BLUE
NET
NOTE
BLUETOOTH
MEMORY
MUTE
SETUP
To specify the preset number from which to start the registration, press cursor keys or PRESET to
select a preset number.
OPTION
ENTER
RETURN
TUNING
TUNING
DISPLAY
TOP MENU
HOME
POP-UP/MENU
PRESET
RED
GREEN
YELLOW
BLUE
PRESET
4
MEMORY
TUNING
TUNING
PRESET
To start the Auto Preset process, press ENTER.
“SEARCH” appears during Auto Preset
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
01:FM 98.50MHz
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
VOL. MUTE VIRTUAL
01:FM 87.50MHz
FPL
FPR
SL
SW
SR
SBL SB SBR
NOTE
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Preset number from which to start the registration
“No Presets” appears on the front display when no radio stations are registered.
The Auto Preset process starts and “SEARCH” appears during Auto
Preset.
Registering radio stations automatically (Auto
Preset)
NOTE
To cancel the Auto Preset process, press RETURN.
When the Auto Preset process finishes, “FINISH” appears on the front display and the
“Option” menu closes automatically.
Automatically register FM radio stations with strong signals.
NOTE
LINK MASTER
▪ You can register up to 40 radio stations as presets.
OUT
ECO
2
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
Auto Preset
▪ To register AM radio stations, see the following:
– “Registering a radio station manually” (p.53)
▪ (U.K., Europe, Russia and Middle East models only)
Only Radio Data System broadcasting stations are registered automatically by the Auto Preset function.
52
En
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
Registering a radio station manually
3
Select a radio station manually and register it to a preset number.
The first time that you do register a station, the selected radio station will
be registered to the preset number “01”. Thereafter, each radio station
you select will be registered to the next empty (unused) preset number
after the most recently registered number.
NOTE
You can register up to 40 radio stations as presets.
1
Hold down MEMORY for a few seconds.
Press FM/AM to select “TUNER” as the input source.
ZONE A
ZONE B
SLEEP
SCENE
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
TOP MENU
HOME
POP UP/MENU
PROGRAM
FM/AM
USB
INPUT
VOLUME
RED
GREEN
YELL
YELLOW
BLUE
NET
2
BLUETOOTH
MEMORY
MUTE
Press TUNING to set a frequency.
SETUP
Hold down the key for about a second to search stations automatically.
MEMORY
OPTION
ENTER
RETURN
TUNING
TUNING
DISPLAY
TOP MENU
HOME
POP-UP/MENU
PRESET
RED
GREEN
YELLOW
BLUE
MEMORY
TUNING
TUNING
PRESET
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
01:FM 98.50MHz
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Preset number
NOTE
To select a preset number for registering, press MEMORY once after tuning into the desired radio
station, press PRESET to select a preset number, and then press MEMORY again.
LINK MASTER
OUT
2
ECO
02:Empty
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
“Empty” (not in use) or the frequency currently registered
This completes the registers.
53
En
Clearing preset stations
Displaying the Radio Data System information
Clear radio stations registered to the preset numbers.
(U.K., Europe, Russia and Middle East models only)
1
Radio Data System is a data transmission system used by FM stations in many
countries. The unit can receive various types of Radio Data System data, such as
“Program Service”, “Program Type”, “Radio Text” and “Clock Time”, when it is tuned
into a Radio Data System broadcasting station.
Press FM/AM to select “TUNER” as the input source.
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
2
3
Tune into the desired Radio Data System broadcasting station.
NOTE
We recommend using “Auto Preset” to tune into the Radio Data System broadcasting stations. For
details, see the following:
Use the cursor keys to select “Preset” and press ENTER.
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
▪ “Registering radio stations automatically (Auto Preset)” (p.52)
VOL. MUTE VIRTUAL
Preset
4
5
1
Press OPTION.
FPL
FPR
SW
SR
SL
SBL SB SBR
2
Use the cursor keys to select “CLEAR”.
Press INFO on the front panel to select between the various
display items.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
Use the cursor keys to select a preset station to be cleared and
press ENTER.
LINK MASTER
OUT
2
ECO
Program Type
About 3 seconds after a display item is selected, its corresponding
information appears.
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
Preset station to be cleared
OUT
2
ECO
Classics
If the preset station is cleared, “Cleared” appears and then the next in-use
preset number is displayed.
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Information
Program Service
01:Cleared
6
7
FPL
FPR
SL
SW
SR
SBL SB SBR
Item name
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
01:FM 98.50MHz
VOL. MUTE VIRTUAL
Repeat step 5 until all desired preset stations are cleared.
Press OPTION.
This completes the clearing preset stations.
Program service name
Program Type
Current program type
Radio Text
Information on the current program
Clock Time
Current time
DSP Program
Sound mode name
Audio Decoder
Decoder name
Frequency
Frequency
NOTE
“Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio
station does not provide the Radio Data System service.
54
En
Receiving traffic information automatically
(U.K., Europe, Russia and Middle East models only)
When “TUNER” is selected as the input source, the unit automatically receives traffic
information. To enable this function, perform the following procedure to set the traffic
information station.
1
2
When “TUNER” is selected as the input source, press OPTION.
Use the cursor keys to select “Traffic Program” and press ENTER.
The traffic information station search will start in 5 seconds. Press ENTER
again to start the search immediately.
NOTE
▪ To search upward/downward from the current frequency, press the cursor keys while “READY”
is displayed.
▪ To cancel the search, press RETURN.
The following screen appears for about 3 seconds when the search
finishes.
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
TP FM101.30MHz
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Traffic information station (frequency)
NOTE
“TP Not Found” appears for about 3 seconds when no traffic information stations are found.
55
En
Listening to DAB radio (RX-D485)
Preparing the DAB tuning
2
DAB (Digital Audio Broadcasting) uses digital signals for clearer sound and more
stable reception compared to analog signals. The unit can also receive DAB+ (an
upgraded version of DAB) that allows for more stations using MPEG-4 HE-AAC v2
audio codec, which has a more efficient transmission method.
Press ENTER to start an initial scan.
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
>>>------- 30%
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
When the initial scan finishes, the unit automatically tunes into the first
DAB radio station as stored in station order.
NOTE
LINK MASTER
▪ The unit supports Band III (174 to 240 MHz) only.
OUT
2
ECO
▪ Be sure to check the DAB coverage in your area in that not all areas are currently being covered. For a list
of nationwide DAB statuses and worldwide DAB frequencies, check WorldDMB online at
http://www.worlddab.org/.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
BBC Radio 4
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
NOTE
▪ For details on the antenna connection, see the following:
▪ If no DAB radio stations are found by an initial scan, the message in Step 1 appears again.
Press ENTER to start an initial scan again.
– “Connecting the DAB/FM antenna (RX-D485)” (p.28)
▪ You can check reception strength of each DAB channel label. For details, see the following:
– “Checking reception strength of each DAB channel label” (p.60)
Before tuning into DAB radio stations, perform an initial scan.
1
▪ To perform an initial scan again after some DAB radio stations are stored, select “Init Scan” in
the “Option” menu. If you perform an initial scan again, the DAB radio stations currently
registered to the preset numbers will be cleared. For details, see the following:
Press FM/DAB to select the DAB band.
– “Performing an initial scan for DAB radio reception” (p.88)
The following message appears on the front display if you have not
performed an initial scan yet.
LINK MASTER
OUT
ECO
2
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
Press [ENTER]
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
56
En
Selecting a DAB radio station for reception
Selecting a preset DAB radio station
You can select a DAB radio station from the stations stored by the initial scan.
Tune into a registered DAB radio station by selecting its preset number.
1
1
Press FM/DAB to select the DAB band.
“TUNER” is selected as the input source and then the DAB radio station
currently selected is displayed on the front display.
2
“TUNER” is selected as the input source and then the DAB radio station
currently selected is displayed on the front display.
2
Press TUNING to select a DAB radio station.
ZONE A
Press FM/DAB to select “TUNER” as the input source.
ZONE B
Press PRESET to select the desired DAB radio station.
ZONE A
ZONE B
SLEEP
SLEEP
SCENE
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
TOPP MENU
TO
POP UP/MENU
HOME
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
PROGRAM
FM/DAB
FM/AM
RED
VOLUME
GREEN
YELL
YELLOW
BLUE
USB
INPUT
VOLUME
NET
MEMORY
MEM
ME
MEMO
MORY
MUTE
SETUP
GREEN
YELL
YELLOW
BLUE
HOME
OPTION
ENTER
TUNING
DISPLAY
RETURN
POP-UP/MENU
TOP MENU
TUNING
TUNIN
TUNI
NG
TUNIN
TUNI
TUNING
NG
DISPLAY
HOME
POP-UP/MENU
PRESSET
PRE
PRESET
YELLOW
MEMORY
MEM
ME
MEMO
MORY
MUTE
SETUP
TUNING
RETURN
PRESET
BLUE
RED
TUNING
TUNING
GREEN
MEMORY
YELLOW
BLUE
MEMORY
TUNING
TUNING
PRESET
PRESET
(RX-D485)
(RX-D485)
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
RED
BLUETOOTH
OPTION
ENTER
GREEN
POP UP/MENU
NET
TUNING
BLUETOOTH
RED
HOME
FM/DAB
FM/AM
USB
INPUT
TOP MENU
TOPP MENU
TO
PROGRAM
2
ECO
Daily Service
LINK MASTER
OUT
2
ECO
VOL. MUTE VIRTUAL
PRESET:01
FPL
FPR
SL
SW
SR
SBL SB SBR
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
NOTE
NOTE
▪ “Off Air” appears when the selected DAB radio station is currently not available.
“No Presets” appears when no DAB radio stations are registered.
▪ When the unit is receiving a secondary station, “2” appears next to “DAB”.
Secondary station
LINK MASTER
OUT
ECO
2
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
BBC National
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
▪ You can watch videos input from external devices while listening to radio. For details, see the
following:
– “Selecting a video source to be output with the selected audio source” (p.84)
57
En
PRESET
NOTE
Registering a DAB radio station as presets
To select a preset number for registering, press MEMORY once after tuning into the desired radio
station, press PRESET to select a preset number, and then press MEMORY again.
Select a DAB radio station and register it to a preset number.
LINK MASTER
NOTE
OUT
“Empty” (not in use) or “Overwrite?” (in use)
Press FM/DAB to select the DAB band.
“TUNER” is selected as the input source and then the DAB radio station
currently selected is displayed on the front display.
2
3
This completes the registers.
Press TUNING to select a DAB radio station.
Hold down MEMORY for a few seconds.
The first time that you do register a station, the selected radio station will
be registered to the preset number “01”. Thereafter, each radio station
you select will be registered to the next empty (unused) preset number
after the most recently registered number.
ZONE A
ZONE B
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
TOPP MENU
TO
HOME
POP UP/MENU
PROGRAM
FM/DAB
FM/AM
USB
INPUT
VOLUME
RED
GREEN
YELL
YELLOW
BLUE
NET
BLUETOOTH
MEMORY
MUTE
SETUP
MEMORY
OPTION
ENTER
RETURN
TUNING
TUNIN
TUNI
NG
TUNIN
TUNI
TUNING
NG
DISPLAY
TOP MENU
HOME
POP-UP/MENU
PRESSET
PRE
PRESET
RED
GREEN
YELLOW
BLUE
MEMORY
TUNING
TUNING
PRESET
(RX-D485)
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
02:Empty
You can register up to 40 radio stations as presets.
1
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
01:BBC Radio 4
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Preset number
58
En
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Clearing preset DAB radio stations
Displaying the DAB information
Clear DAB radio stations registered to the preset numbers.
The unit can receive various types of DAB information when it is tuned into a DAB
radio station.
1
Press FM/DAB to select “TUNER” as the input source.
1
2
“TUNER” is selected as the input source and then the DAB radio station
currently selected is displayed on the front display.
2
3
Press OPTION.
Press INFO on the front panel to select between the various
display items.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
Program Type
Use the cursor keys to select “Preset” and press ENTER.
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
Preset
4
Tune into the desired DAB radio station.
FPL
FPR
SL
SW
SR
SBL SB SBR
Item name
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
About 3 seconds after a display item is selected, its corresponding
information appears on the front display.
Use the cursor keys to select a preset station to be cleared and
press ENTER.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
Classic Music
01:Clear?
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Information
Preset station to be cleared
If the preset station is cleared, “Cleared” appears and then the next in-use
preset number is displayed.
01:Cleared
5
6
VOL. MUTE VIRTUAL
Repeat step 4 until all desired preset stations are cleared.
Press OPTION.
This completes the clearing preset stations.
Service Label
Station name
DLS (Dynamic Label
Segment)
Information on the current station
Ensemble Label
Ensemble name
Program Type
Station genre
Date And Time
Current date and time
Audio Mode
Audio mode (monaural/stereo) and bit rate
CH Label/Freq.
Channel label and frequency
Signal Quality
Signal reception quality (0 [none] to 100 [best])
DSP Program
Sound mode name
Audio Decoder
Decoder name
NOTE
Some information may not be available depending on the selected DAB radio station.
59
En
Checking reception strength of
each DAB channel label
n Checking reception strength of
each DAB channel label
You can check reception strength of each DAB channel
label (0 [none] to 100 [best]).
1
2
3
4
The unit supports Band III (174 to 240 MHz) only.
235.776 MHz
13D
237.488 MHz
13E
176.640 MHz
5B
239.200 MHz
13F
178.352 MHz
5C
180.064 MHz
5D
181.936 MHz
6A
6B
“TUNER” is selected as the input source and
then the DAB radio station currently selected
is displayed on the front display.
187.072 MHz
6D
188.928 MHz
7A
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
5A
Level: 80
DAB channel label
Press OPTION.
This completes the checking.
190.640 MHz
7B
192.352 MHz
7C
194.064 MHz
7D
195.936 MHz
8A
197.648 MHz
8B
199.360 MHz
8C
201.072 MHz
8D
202.928 MHz
9A
204.640 MHz
9B
206.352 MHz
9C
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Reception strength
13C
5A
6C
Use the cursor keys to select the
desired DAB channel label.
13B
234.208 MHz
Channel label
185.360 MHz
Use the cursor keys to select “Tune
AID” and press ENTER.
Channel label
Frequency
183.648 MHz
Press OPTION.
Frequency
232.496 MHz
174.928 MHz
Press FM/DAB to select “TUNER” as the
input source.
ECO
5
n DAB frequency information
208.064 MHz
9D
209.936 MHz
10A
211.648 MHz
10B
213.360 MHz
10C
215.072 MHz
10D
216.928 MHz
11A
218.640 MHz
11B
220.352 MHz
11C
222.064 MHz
11D
223.936 MHz
12A
225.648 MHz
12B
227.360 MHz
12C
229.072 MHz
12D
230.784 MHz
13A
60
En
Listening to FM radio (RX-D485)
Selecting a frequency for FM radio reception
2
You can tune into an FM radio station by specifying its frequency.
Press TUNING to set a frequency.
Hold down the key for about a second to search stations automatically.
NOTE
ZONE A
ZONE B
SLEEP
SCENE
The radio frequencies differ depending on the country or region where the unit is being used. The explanation
of this section uses a display with frequencies used in U.K. and Europe models.
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
TOPP MENU
TO
HOME
POP UP/MENU
PROGRAM
FM/DAB
FM/AM
1
USB
INPUT
VOLUME
RED
GREEN
YELL
YELLOW
BLUE
NET
Press FM/DAB to select the FM band.
TUNING
BLUETOOTH
MEMORY
MEM
ME
MEMO
MORY
MUTE
SETUP
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
OPTION
ENTER
RETURN
TUNING
TUNING
DISPLAY
TOP MENU
HOME
POP-UP/MENU
PRESSET
PRE
PRESET
RED
GREEN
YELLOW
BLUE
MEMORY
LINK MASTER
OUT
ECO
2
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
FM 87.50MHz
TUNING
TUNING
PRESET
VOL. MUTE VIRTUAL
(RX-D485)
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
FM 98.50MHz
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
On the front display, “TUNED” lights up when the unit is receiving an FM
radio station signal.
“STEREO” lights up when the unit is receiving a stereo FM radio signal.
NOTE
You can watch videos input from external devices while listening to radio. For details, see the
following:
▪ “Selecting a video source to be output with the selected audio source” (p.84)
61
En
Selecting a preset FM radio station
1
Tune into a registered FM radio station by selecting its preset number.
1
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
Press FM/DAB to select “TUNER” as the input source.
2
3
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
2
Press FM/DAB to select “TUNER” as the input source.
Press PRESET to select the desired FM radio station.
Press OPTION.
Use the cursor keys to select “Preset” and press ENTER.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
ZONE A
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
TOPP MENU
TO
HOME
POP UP/MENU
FM/DAB
FM/AM
INPUT
VOLUME
RED
GREEN
YELL
YELLOW
FPL
FPR
SW
SR
SL
SBL SB SBR
The preset number from which to start the registration is displayed on the
front display.
PROGRAM
USB
VOL. MUTE VIRTUAL
Preset
ZONE B
BLUE
NET
NOTE
BLUETOOTH
MEMORY
MEM
ME
MEMO
MORY
MUTE
SETUP
To specify the preset number from which to start the registration, press cursor keys or PRESET to
select a preset number.
OPTION
ENTER
RETURN
TUNING
TUNIN
TUNI
NG
TUNIN
TUNI
TUNING
NG
DISPLAY
TOP MENU
HOME
POP-UP/MENU
PRESET
RED
GREEN
YELLOW
BLUE
PRESET
4
MEMORY
TUNING
TUNING
PRESET
To start the Auto Preset process, press ENTER.
“SEARCH” appears during Auto Preset
(RX-D485)
OUT
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
01:FM 98.50MHz
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
01:FM 87.50MHz
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Preset number from which to start the registration
NOTE
The Auto Preset process starts and “SEARCH” appears during Auto
Preset.
“No Presets” appears on the front display when no radio stations are registered.
Registering FM radio stations automatically (Auto
Preset)
NOTE
To cancel the Auto Preset process, press RETURN.
When the Auto Preset process finishes, “FINISH” appears on the front display and the
“Option” menu closes automatically.
Automatically register FM radio stations with strong signals.
LINK MASTER
NOTE
OUT
ECO
2
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
Auto Preset
▪ You can register up to 40 radio stations as presets.
▪ (U.K. and Europe models only)
Only Radio Data System broadcasting stations are registered automatically by the Auto Preset function.
62
En
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
Registering an FM radio station manually
3
Select an FM radio station manually and register it to a preset number.
The first time that you do register an FM radio station, the selected radio
station will be registered to the preset number “01”. Thereafter, each radio
station you select will be registered to the next empty (unused) preset
number after the most recently registered number.
NOTE
You can register up to 40 radio stations as presets.
1
Hold down MEMORY for a few seconds.
Press FM/DAB to select “TUNER” as the input source.
ZONE A
ZONE B
SLEEP
SCENE
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
TOPP MENU
TO
HOME
POP UP/MENU
PROGRAM
FM/DAB
FM/AM
USB
INPUT
VOLUME
RED
GREEN
YELL
YELLOW
BLUE
NET
2
BLUETOOTH
MEMORY
MUTE
Press TUNING to set a frequency.
SETUP
Hold down the key for about a second to search stations automatically.
MEMORY
OPTION
ENTER
RETURN
TUNING
TUNIN
TUNI
NG
TUNIN
TUNI
TUNING
NG
DISPLAY
TOP MENU
HOME
POP-UP/MENU
PRESSET
PRE
PRESET
RED
GREEN
YELLOW
BLUE
MEMORY
TUNING
TUNING
PRESET
(RX-D485)
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
01:FM 98.50MHz
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Preset number
NOTE
To select a preset number for registering, press MEMORY once after tuning into the desired radio
station, press PRESET to select a preset number, and then press MEMORY again.
LINK MASTER
OUT
2
ECO
02:Empty
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
“Empty” (not in use) or the frequency currently registered
This completes the registers.
63
En
Clearing preset FM radio stations
Displaying the Radio Data System information
Clear FM radio stations registered to the preset numbers.
(U.K. and Europe models only)
1
Radio Data System is a data transmission system used by FM stations in many
countries. The unit can receive various types of Radio Data System data, such as
“Program Service”, “Program Type”, “Radio Text” and “Clock Time”, when it is tuned
into a Radio Data System broadcasting station.
Press FM/DAB to select “TUNER” as the input source.
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
2
3
Tune into the desired Radio Data System broadcasting station.
NOTE
We recommend using “Auto Preset” to tune into the Radio Data System broadcasting stations. For
details, see the following:
Use the cursor keys to select “Preset” and press ENTER.
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
▪ “Registering FM radio stations automatically (Auto Preset)” (p.62)
VOL. MUTE VIRTUAL
Preset
4
5
1
Press OPTION.
FPL
FPR
SW
SR
SL
SBL SB SBR
2
Use the cursor keys to select “CLEAR”.
Press INFO on the front panel to select between the various
display items.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
Use the cursor keys to select a preset station to be cleared and
press ENTER.
LINK MASTER
OUT
2
ECO
Program Type
About 3 seconds after a display item is selected, its corresponding
information appears on the front display.
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
Preset station to be cleared
OUT
2
ECO
Classics
If the preset station is cleared, “Cleared” appears and then the next in-use
preset number is displayed.
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Information
Program Service
01:Cleared
6
7
FPL
FPR
SL
SW
SR
SBL SB SBR
Item name
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
01:FM 98.50MHz
VOL. MUTE VIRTUAL
Repeat step 5 until all desired preset stations are cleared.
Press OPTION.
This completes the clearing preset stations.
Program service name
Program Type
Current program type
Radio Text
Information on the current program
Clock Time
Current time
DSP Program
Sound mode name
Audio Decoder
Decoder name
Frequency
Frequency
NOTE
“Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not displayed if the radio
station does not provide the Radio Data System service.
64
En
Playing back music stored on a Bluetooth® device
Playback Bluetooth® device music on the unit
3
You can play back music files stored on a Bluetooth device (such as smartphones) on
the unit.
On the Bluetooth device, select a song and start playback.
The playback screen is displayed on the TV.
NOTE
▪ If the unit detects the Bluetooth device previously connected, the unit automatically connects to
the Bluetooth device after Step 1. To establish another Bluetooth connection, first terminate the
current Bluetooth connection.
▪ To terminate the Bluetooth connection, perform one of the following operations.
The unit
Bluetooth device
(such as smartphones)
– Perform the disconnect operation on the Bluetooth device.
– Select an input source other than “Bluetooth” on the unit.
NOTE
– Select “Disconnect” in “Audio Receive” in the “Setup” menu.
▪ Use the wireless antennas that are standing upright for connecting to a Bluetooth device wirelessly. For
details, see the following:
– “Preparing wireless antennas (wireless connection)” (p.30)
▪ To use the Bluetooth function, turn on the Bluetooth function of a Bluetooth device.
▪ To use the Bluetooth function, set “Bluetooth” in the “Setup” menu to “On”. For details, see the following:
– “Setting the use of Bluetooth®” (p.114)
▪ For details on supported Bluetooth devices, see the following:
– “Supported Bluetooth® devices” (p.146)
1
2
Press BLUETOOTH to select “Bluetooth” as the input source.
On the Bluetooth device, select the unit (network name of the
unit).
A connection between the Bluetooth device and the unit will be made.
If the pass key is required, enter the number “0000”.
65
En
Enjoying audio using Bluetooth® speakers/
headphones
6
Use the cursor keys to select the Bluetooth speakers/headphones
to be connected with the unit and press ENTER.
When the connection process finishes, “Completed” appears and audio
played back on the unit will be reproduced from the Bluetooth speakers/
headphones.
You can enjoy audio played back on the unit using Bluetooth speakers/headphones.
NOTE
If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to the pairing
mode and then perform “Device Search” operation again.
The unit
7
Bluetooth speakers/headphones
Press ENTER.
This completes the settings.
NOTE
NOTE
▪ Sounds will be also output from the speakers connected to the unit.
To terminate the Bluetooth connection, perform one of the following operations.
▪ AirPlay and DSD audio cannot be delivered.
▪ Perform the disconnect operation on the Bluetooth speakers/headphones.
▪ You cannot use the Bluetooth audio transmitter function and the Bluetooth audio receiver function at the
same time.
▪ Press the SETUP key, then use the cursor keys to select "Bluetooth", then "Transmitter", and then "Off".
1
Use the input selection keys on the remote control to select an
input source.
Select an input source other than Bluetooth.
2
3
4
5
Press SETUP.
Use the cursor keys to select “Bluetooth” and press ENTER.
Use the cursor keys to select “Transmitter” and then set to “On”.
Use the cursor keys to select “Device Search” and press ENTER
to search the Bluetooth devices.
The list of Bluetooth devices is displayed.
66
En
Playing back music with AirPlay
Playback of iTunes/iPhone music contents with
AirPlay
3
Select a song and start playback.
The unit automatically selects “AirPlay” as the input source and starts
playback.
The AirPlay allows you to play back iTunes or iPhone/iPad/iPod touch music on the unit
via network.
The playback screen is displayed on the TV.
iTunes
CAUTION
PC
Router
▪ When you use iTunes/iPhone controls to adjust volume, the volume may be unexpectedly loud. This
could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop
playback on the iTunes/iPhone immediately. We recommend volume controls from iTunes/iPhone
within the limited range by setting “Volume Interlock (Vol.Interlock)” in the “Option” menu.
The unit
NOTE
▪ You can turn on the unit automatically when starting playback on iTunes or iPhone. For details on the
settings, see the following:
(Wired network or wireless network)
– “Setting the use of the Network Standby function” (p.112)
▪ You can edit the network name (the unit’s name on the network) displayed on iTunes/iPhone. For details,
see the following:
iPhone/iPad/iPod touch
– “Setting the network name of the unit” (p.113)
NOTE
▪ You can adjust the unit’s volume from the iTunes/iPhone during playback. To disable volume controls from
iTunes/iPhone, see the following:
For details on supported iPhone devices, see the following:
▪ “Supported AirPlay devices” (p.146)
1
2
– “Enabling volume control via AirPlay” (p.87)
Start iTunes on the PC or display the playback screen on the
iPhone.
On the iTunes/iPhone, click (tap) the AirPlay icon and select the
unit (network name of the unit) as the audio output device.
iOS 10 (example)
iTunes (example)
67
En
Playing back music stored on a USB storage device
Playback of USB storage device contents
3
You can play back music files stored on a USB storage device on the unit.
Use the cursor keys to select an item and press ENTER.
If a song is selected, playback starts and the playback screen is
displayed.
NOTE
For details on playable USB devices and USB file formats, see the following:
NOTE
▪ “Supported USB devices” (p.146)
▪ To return to the top level while on the browse screen, hold down RETURN.
▪ “Supported file formats” (p.147)
▪ To switch the screen mode browse/playback/off, press DISPLAY.
1
NOTE
Connect the USB storage device to the USB jack.
▪ You can configure the shuffle/repeat settings for playback of contents. For details, see the following:
– “Configuring the shuffle setting” (p.86)
The unit (front)
– “Configuring the repeat setting” (p.87)
RADIO
STRAIGHT
AUX
USB
AUDIO
5V
▪ You can register contents as shortcuts and access them directly. For details, see the following:
– “Registering a favorite content as shortcut” (p.75)
(CONNECT)
1A
USB storage device
NOTE
▪ If the USB storage device contains many files, it may take time to load them. In this case,
“Loading…” appears on the front display.
▪ Stop playback of the USB storage device before disconnecting it from the USB jack.
▪ Connect a USB storage device directly to the USB jack of the unit. Do not use extension cables.
▪ The unit cannot charge USB devices while it is in standby mode.
2
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
NOTE
If playback is ongoing on your USB storage device, the playback screen is displayed.
68
En
Playing back music stored on media servers (PCs/NAS)
Playing back music stored on media servers (PCs/
NAS)
Media sharing setup on media servers (PCs/NAS)
To play back music files stored on your media servers, first you need to configure the
media sharing setting on each music server.
You can play back music files stored on your media server on the unit.
The setting procedure may vary depending on the media server. The following
procedure is a setup example for Windows Media Player 12.
NOTE
▪ You need to configure the media sharing setting on each music server in advance. For details, see the
following:
NOTE
▪ For a media server with software except Windows Media Player installed, refer to the instruction manual
for the device or software and configure the media sharing settings.
– “Media sharing setup on media servers (PCs/NAS)” (p.69)
▪ The setting procedure may vary depending on the view setting of Windows Media Player or the settings of
PC.
1
2
3
4
5
▪ To use this function, the unit and your PC must be connected to the same router. You can check whether
the network parameters (such as the IP address) are properly assigned to the unit. For details, see the
following:
– “Checking the network information of the unit” (p.110)
Start Windows Media Player 12 on your PC.
▪ The audio may be interrupted while using the wireless network connection. In this case, use the wired
network connection.
▪ For details on playable file formats, see the following:
Select “Stream”, then “Turn on media streaming”.
– “Supported file formats” (p.147)
Click “Turn on media streaming”.
1
Press NET to select “SERVER” as the input source.
The browse screen is displayed on the TV.
Select “Allowed” from the drop-down list next to the unit’s model
name.
NOTE
If playback of a music file selected from the unit is ongoing on your PC, the playback screen is
displayed.
Click “OK” to exit.
This completes the settings.
2
NOTE
For details on media sharing settings, refer to Windows Media Player help.
69
En
Use the cursor keys to select a music server and press ENTER.
3
Use the cursor keys to select an item and press ENTER.
If a song is selected, playback starts and the playback screen is
displayed.
NOTE
▪ To return to the top level while on the browse screen, hold down RETURN.
▪ To switch the screen mode browse/playback/off, press DISPLAY.
NOTE
▪ You can configure the shuffle/repeat settings for playback of contents. For details, see the following:
– “Configuring the shuffle setting” (p.86)
– “Configuring the repeat setting” (p.87)
▪ You can also use the Digital Media Controller (DMC) to control playback. For details, see the following:
– “Setting the use of a Digital Media Controller” (p.112)
▪ You can register contents as shortcuts and access them directly. For details, see the following:
– “Registering a favorite content as shortcut” (p.75)
70
En
Listening to Internet radio
Selecting an Internet radio station
2
Select an Internet radio station and start playback.
On the playback screen, the current station is added to the “Favorites”
folder. On the browse screen, the station selected in the list is added to
the “Favorites” folder.
NOTE
▪ To use this function, the unit must be connected to the Internet. You can check whether the network
parameters (such as the IP address) are properly assigned to the unit. For details, see the following:
When the registering process finishes, the “Option” menu closes
automatically.
– “Checking the network information of the unit” (p.110)
▪ You may not be able to receive some Internet radio stations.
▪ The unit uses the airable.Radio service. airable is a service of Tune In GmbH.
NOTE
▪ This service may be discontinued without notice.
▪ Radio stations registered to favorites are displayed with “«”.
▪ Folder names are different depending on the language.
1
▪ To remove a station that is registered to favorites, select the station and then select “Remove from
favorites”.
Press NET to select “NET RADIO” as the input source.
▪ You can register Internet radio stations as shortcuts and access them directly. For details, see the
following:
The browse screen is displayed on the TV.
2
– “Registering a favorite content as shortcut” (p.75)
Use the cursor keys to select an item and press ENTER.
If an Internet radio station is selected, playback starts and the playback
screen is displayed.
NOTE
▪ To return to the top level while on the browse screen, hold down RETURN.
▪ To switch the screen mode browse/playback/off, press DISPLAY.
Registering favorite Internet radio stations
You can register the Internet radio station in playback at present to the “Favorites”
folder.
1
Use the cursor keys to select “Add to favorites” and press
ENTER.
While listening to Internet radio, press OPTION.
71
En
Listening to music streaming services
Listening to a streaming service
You can listen to a streaming service with the MusicCast CONTROLLER on your
mobile device. On the MusicCast CONTROLLER screen, select the room name that
was specified for the unit, and then select the streaming service to be tuned into by its
station name. For details, see the MusicCast CONTROLLER app.
NOTE
▪ Service is limited to certain areas.
▪ Services supported with the unit may not be available depending upon some regions where the unit is
purchased.
▪ Service may change or be discontinued without notice.
▪ After registering the unit in the MusicCast CONTROLLER app, you can use the streaming service. For
details, see the following:
– “Adding the unit to the MusicCast network” (p.37)
▪ To use this function, the unit must be connected to the Internet. You can check whether the network
parameters (such as the IP address) are properly assigned to the unit. For details, see the following:
– “Checking the network information of the unit” (p.110)
▪ For details on music streaming services, see the supplements for streaming services. Access the Yamaha
Downloads site to download the supplement.
http://download.yamaha.com/
72
En
Useful playback functions
By default, the following settings are registered for each scene.
SCENE function
SCENE
n Selecting the input source and favorite settings with
one touch (SCENE)
The SCENE function allows you to select the following settings with just one touch.
• Input source
Input
HDMI1
AUDIO1
NET RADIO
TUNER
Sound program
Sci-Fi
STRAIGHT
5ch Stereo
5ch Stereo
Compressed Music
Enhancer
Off
On
On
On
SCENE link playback
On
On
Off
Off
• Compressed Music Enhancer On/Off
Target zone
Zone A
Zone A
Zone A
Zone A
• SCENE link playback
NOTE
• Target zones
▪ For details on the sound program, Compressed Music Enhancer and target zones, see the following:
• Sound program
– “Enjoying sound field effects optimized for the type of content” (p.39)
You can register four SCENE functions that are assigned to four SCENE keys on the
remote control respectively.
– “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.42)
– “Operating the Zone B” (p.44)
n Selecting a registered scene
▪ The SCENE link playback function allows you to automatically turn on the TV or start playback of an
external device connected to the unit via HDMI, in conjunction with a scene selection. For details, see the
following:
Press SCENE, and then the input source and settings registered to the corresponding
scene are selected. The unit turns on automatically when it is in standby mode.
ZONE A
– “Setting the use of SCENE link playback” (p.101)
ZONE B
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
PROGRAM
ZONE A
FM/AM
ZONE B
USB
INPUT
SLEEP
VOLUME
NET
BLUETOOTH
SCENE
MUTE
SETUP
OPTION
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
SCENE
ENTER
RETURN
TOP MENU
RED
DISPLAY
HOME
GREEN
YELLOW
POP-UP/MENU
BLUE
MEMORY
TUNING
PROGRAM
TUNING
PRESET
73
En
n Registering a scene
2
You can change the default setting and register the function that is assigned to each
SCENE key.
Hold down the desired SCENE key until “SET Complete” appears
on the front display.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
NOTE
SET Complete
We recommend registering the scene with playing back the content that you want to register.
1
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
This completes the registers.
Perform the following operations to prepare the settings you want
to assign to a scene.
▪ Select an input source
NOTE
For details on the settings, see the following:
▪ “Enjoying sound field effects optimized for the type of content” (p.39)
▪ “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.42)
▪ Select a sound program or straight decode
▪ “Setting the use of SCENE link playback” (p.101)
▪ Enable/disable Compressed Music Enhancer
▪ “Operating the Zone B” (p.44)
▪ Enable/disable SCENE link playback
▪ Enable/disable the audio output to Zone A/B
74
En
Shortcut function
2
n Registering a favorite content as shortcut
Hold down MEMORY for a few seconds.
ZONE A
ZONE B
SLEEP
SCENE
You can register favorite Bluetooth, USB, media server and network content as
shortcuts and access them directly by selecting the shortcut numbers.
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
TOP MENU
HOME
POP UP/MENU
PROGRAM
FM/AM
USB
INPUT
VOLUME
RED
GREEN
YELL
YELLOW
BLUE
NET
BLUETOOTH
NOTE
SETUP
▪ You can register up to 40 contents as shortcuts.
MEMORY
OPTION
ENTER
RETURN
▪ You can also use the “Favorites” feature to register Internet radio stations. For details, see the following:
TUNING
TUNING
DISPLAY
TOP MENU
HOME
POP-UP/MENU
PRESET
RED
– “Registering favorite Internet radio stations” (p.71)
GREEN
YELLOW
BLUE
MEMORY
TUNING
TUNING
▪ The unit registers Bluetooth or AirPlay as an input source. No individual content can be registered.
1
MEMORY
MUTE
PRESET
Play back a song or a radio station to be registered.
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
01:Empty
FPL
FPR
SL
SW
SR
SBL SB SBR
Shortcut number (flashes)
“MEMORY” appears on the front display and the shortcut number to
which the item will be registered blinks.
NOTE
To change a shortcut number to which the item will be registered, use PRESET to select the
shortcut number after step 2.
LINK MASTER
OUT
2
ECO
02:Empty
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
“Empty” (not in use) or item currently registered
3
Press MEMORY.
The registered shortcut number and “Memorized” appear on the front
display.
This completes the registers.
75
En
n Recalling a registered content as shortcut
NOTE
Recall a registered content (Bluetooth, USB, media server and network content) by
selecting the shortcut number.
▪ The registered item cannot be recalled in the following cases.
▪ “No Presets” appears on the front display when no items are registered.
– A USB storage device which contains the registered item is not connected to this unit.
– A PC which contains the registered item is turned off or not connected to the network.
NOTE
– The registered network content is temporarily unavailable or out of service.
You can register up to 40 contents as shortcuts.
1
– The registered item (file) has been deleted or moved to another location.
– A Bluetooth connection cannot be established.
Press BLUETOOTH, NET or USB.
ZONE A
▪ When you register music files stored on a USB storage device or a media server (PC/NAS), this
unit memorizes the relative position of the music files in the folder. If you have added or deleted
any music files to or from the folder, this unit may not recall the music file correctly. In such
cases, register the items again.
ZONE B
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
PROGRAM
PROGRAM
▪ The registered content (songs and Internet radio stations) can be displayed as a list and easily
removed by using MusicCast CONTROLLER on your mobile device. For details, see the
following:
FM/AM
USB
INPUT
VOLUME
NET
FM/AM
BLUETOOTH
MUTE
SETUP
USB
OPTION
INPUT
ENTER
RETURN
TOP MENU
HOME
RED
GREEN
USB
NET
BLUETOOTH
POP-UP/MENU
BLUETOOTH
BLUE
YELLOW
MEMORY
TUNING
TUNING
MUTE
PRESET
2
– “Using MusicCast CONTROLLER” (p.37)
VOLUME
NET
DISPLAY
Press PRESET to select a desired content.
ZONE A
ZONE B
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
TOP MENU
HOME
POP UP/MENU
PROGRAM
FM/AM
USB
INPUT
VOLUME
RED
GREEN
YELL
YELLOW
BLUE
NET
BLUETOOTH
MEMORY
MUTE
SETUP
OPTION
ENTER
RETURN
TUNING
TUNING
DISPLAY
TOP MENU
HOME
POP-UP/MENU
PRESET
RED
GREEN
YELLOW
BLUE
PRESET
MEMORY
TUNING
TUNING
PRESET
LINK MASTER
OUT
2
ECO
01:USB
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Playback of the selected content starts.
76
En
Configuring playback settings for different playback sources (Option menu)
Basic operation of the Option menu
LINK MASTER
OUT
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
Input Select
Perform the following basic procedure to operate the “Option” menu. With the “Option”
menu, you can configure different playback settings according to the input source
currently being played back.
1
2
ECO
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Front display
Press OPTION.
ZONE A
ZONE B
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
MUTE
PROGRAM
FM/AM
USB
INPUT
VOLUME
SETUPP
OPTION
OPTION
OPTION
NET
BLUETOOTH
MUTE
SETUP
ENTER
OPTION
ENTER
RETURN
TOP MENU
DISPLAY
HOME
POP-UP/MENU
RETURN
RED
GREEN
YELLOW
DISPLA
DISPLAY
BLUE
MEMORY
TUNING
TUNING
TTOP
TO
OP MEN
MENU
ME
NU
HOME
HOME
POP-UP
PO
POP-UP/MENU
P-UP//MENU
PRESET
TV screen
2
3
4
Use the cursor keys to select an item and press ENTER.
Use the cursor keys to select a setting.
Press OPTION.
This completes the settings.
NOTE
For details on the default settings, see the following:
▪ “Default settings of the Option menu” (p.157)
77
En
Option menu items
Item
Use the following table to configure playback settings of the unit.
Preset (Preset)
NOTE
▪ Available items vary depending on the selected input source.
▪ Depending on the region of purchase, some menu items for audio streaming services are also available.
Function
Page
Input Select (Input Select)
Switches the input source.
p.79
Tone Control (Tone Control)
Adjusts the level of high-frequency range and lowfrequency range individually.
p.79
Program (PRG)
Select the sound programs and stereo playback.
p.79
Sur.Decode
(SrDec)
Selects a surround decoder to be used.
p.81
Adjusts the sound field effect level.
p.81
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted to the volume.
p.81
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer.
p.82
Input Trim
(In.Trim)
Corrects volume differences between input sources.
p.82
DSP/Surround DSP Level
(DSP Level)
(DSP/
Surround)
Adaptive DRC
(A.DRC)
Volume Trim
Subwoofer Trim
Fine-adjusts the subwoofer volume.
(Volume Trim) (SW.Trim)
ZoneB Trim
(ZB.Trim)
Lipsync (Lipsync)
p.82
Enables/disables the “Lipsync” setting in the “Setup”
menu.
p.82
Signal Information (Signal Info.) Displays information about the video/audio signals.
Audio In (Audio In)
p.83
Video Out (Video Out)
Selects a video source to be output together with the
selected audio source.
p.84
FM Mode (FM Mode)
Switches between “Stereo” and “Monaural” for FM
radio reception.
p.84
Clear Preset
(CLEAR)
Clear radio stations registered to preset numbers.
p.85
Automatically searches for a traffic information
station.
p.86
Configures the shuffle setting.
p.86
Configures the repeat setting.
p.87
Volume Interlock (Vol.Interlock)
Enables/disables volume control from iTunes/iPhone
via AirPlay.
p.87
Adds your favorite Internet radio station to the
“Favorites” folder, or removes it from the “Favorites”
folder.
p.87
Add to favorites (Add to Fav.)
Remove from favorites
(RemovefromFav.)
Init Scan (Init Scan)
Tune AID (Tune AID)
78
(U.K., Europe, Russia and Middle East models only)
Repeat (Repeat)
p.83
Combines the video of the selected input source with
the audio of a different input source.
p.85
Shuffle (Shuffle)
p.82
Corrects volume differences between Zone A/B.
Page
Automatically registers FM radio stations with strong
signals as presets.
Traffic Program
(TrafficProgram)
▪ Text in parentheses denotes indicators on the front display.
Item
Function
Auto Preset
(AUTO)
En
(RX-D485 only)
Performs an initial scan for DAB radio reception.
(RX-D485 only)
Checks reception strength of each DAB channel.
p.88
p.88
Switching the input source
Configuring DSP/Surround
Switches the input source. Press ENTER to switch to the selected input source.
Option menu
n Selecting sound programs
“Input Select”
Select sound programs and stereo playback.
NOTE
Adjusting the tone of the audio output
You can select a sound program by pressing PROGRAM.
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
individually.
Option menu
Option menu
MUSIC
“DSP/Surround” > “Program”
“Tone Control”
Choices
Treble, Bass
Hall in Munich
This program simulates a Munich concert hall with approximately 2,500
seats that uses stylish wood for the interior finishing. Fine, beautiful
reverberations spread richly, creating a calming atmosphere. The
listener’s virtual seat is at the center left of the arena.
Hall in Vienna
This program simulates a 1700-seat, middle-sized concert hall with a
shoebox shape that is traditional in Vienna. Pillars and ornate carvings
create extremely complex reverberations from all around the audience,
producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling, like an
audience hall in a palace. It offers pleasant reverberations that are
suitable for courtly music and chamber music.
Cellar Club
This program simulates an intimate concert venue with a low ceiling and
homey atmosphere. A realistic, live sound field delivers powerful sounds
that make you feel as if you are sitting in the front row in front of a small
stage.
The Roxy Theatre
This program creates the sound field of a 460-seat rock music concert
venue in Los Angeles. The listener’s virtual seat is at the center left of the
hall.
The Bottom Line
This program creates the sound field at stage front in The Bottom Line, a
famous New York jazz club once. The floor can seat 300 people to the
left and right in a sound field offering real and vibrant sound.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
NOTE
▪ When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears.
▪ You can also adjust the tone with the front panel controls. Press TONE CONTROL to select “Treble” or
“Bass”, then press PROGRAM to make an adjustment.
▪ If you set an extreme value, sounds may not match those from other channels.
79
En
MOVIE
Sports
Mono Movie
This program allows listeners to enjoy the rich vividness of sport
broadcasts and light entertainment programs. In sports broadcasts, the
commentators’ voices are positioned clearly at the center, while the
atmosphere inside the stadium is realistically conveyed by the peripheral
delivery of the sounds of the fans in a suitable space.
STEREO
Action Game
This program is suitable for action games, such as car racing and
fighting games. The reality of, and emphasis on, various effects makes
the player feel like they are right in the middle of the action, allowing for
greater concentration. Use this program in combination with Compressed
Music Enhancer for a more dynamic and strong sound field.
Roleplaying Game
This program is suitable for role-playing and adventure games. This
program adds depth to the sound field for natural and realistic
reproduction of background music, special effects, and dialogue from a
wide variety of scenes. Use this program in combination with
Compressed Music Enhancer for a clearer and more spatial sound field.
Music Video
This program allows you to enjoy videos of pop, rock, and jazz concerts,
as if you were there yourself. Immerse yourself in the hot concert
atmosphere thanks to the vividness of the singers and solos on stage, a
presence sound field that emphasizes the beat of rhythm instruments,
and a surround sound field that reproduces the space of a big live hall.
Standard
Spectacle
Sci-Fi
This program clearly reproduces the finely elaborated sound design of
the latest Sci-Fi and SFX movies. You can enjoy a variety of
cinematographically created virtual spaces reproduced with clear
separation between dialogue, sound effects, and background music.
Adventure
This program is ideal for reproducing the sound design of action and
adventure movies precisely. The sound field restrains reverberations, but
puts emphasis on reproducing a sensation of expansiveness on both
sides, powerful space expanded widely to the left and right. The
restrained depth creates a clear and powerful space, while also
maintaining the articulation of the sounds and the separation of the
channels.
Drama
This program features stable reverberations that match a wide range of
movie genres, from serious dramas to musicals and comedies. The
reverberations are modest, but suitably stereophonic. The sound effects
and background music are reproduced with a gentle echo that does not
impinge on the articulation of the dialogue. You’ll never get tired listening
for long periods.
2ch Stereo
Use this program to mix down multichannel sources to 2 channels. When
multichannel signals are input, they are down mixed to 2 channels and
output from the front speakers (this program does not utilize CINEMA
DSP).
5ch Stereo
Use this program to output sound from all speakers. When you play back
multichannel sources, the unit mixes down the source to 2 channels, and
then outputs the sound from all speakers. This program creates a larger
sound field and is ideal for background music at parties.
UNPROCESSED
This program creates a sound field that emphasizes the surround feeling
without disturbing the original acoustic positioning of multichannel audio.
Its design is based on the concept of the ideal movie theater, in which
the audience is surrounded by beautiful reverberations from the left,
right, and rear.
This program delivers the scale and grandeur of spectacular movie
productions. It delivers an expansive sound space to match the
cinemascope wide-screen, and boasts a broad dynamic range,
providing everything from small delicate sounds to powerful loud booms.
This program reproduces monaural video sources, such as classic
movies, in an atmosphere of a good old movie theater. The program
creates a pleasant space with depth, by adding breadth and the
appropriate reverberation to the original audio.
Sur.Decode
The surround decoder enables multichannel playback from 2-channel
sources without sound field effects.
Straight
When the straight decode mode is enabled, the unit produces stereo
sound from the front speakers for 2-channel sources such as CDs, and
produces unprocessed multichannel sounds for multichannel sources.
NOTE
For details on “Sur.Decode”, see the following:
▪ “Selecting the surround decoder used in the program” (p.81)
80
En
n Selecting the surround decoder used in the program
n Adjusting the sound field effect level
Selects a surround decoder to be used.
Adjusts the sound field effect level.
NOTE
Option menu
For details on “Program” in the “Option” menu, see the following:
“DSP/Surround” > “DSP Level”
▪ “Selecting sound programs” (p.79)
Setting range
Option menu
-6 dB to +3 dB (1 dB increments)
“DSP/Surround” > “Sur.Decode”
n Adjusting the dynamic range automatically
Settings
DPL Movie
Uses the Dolby Pro Logic II decoder suitable for movies.
DPL Music
Uses the Dolby Pro Logic II decoder suitable for music.
DPL Game
Uses the Dolby Pro Logic II decoder suitable for games.
Neo:6 Cinema
Uses the DTS Neo: 6 decoder suitable for movies.
Neo:6 Music
Uses the DTS Neo: 6 decoder suitable for music.
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
when the volume level is adjusted. When it is set to “On”, the dynamic range becomes
narrow at a low volume and wide at a high volume. It is useful for listening to playback
at a low volume at night.
Option menu
“DSP/Surround” > “Adaptive DRC”
Settings
NOTE
▪ For details on each decoder, see the following:
– “Glossary of audio decoding format” (p.144)
Off
The dynamic range is not automatically adjusted.
On
Automatically adjusts the dynamic range.
▪ You can adjust the surround decoder parameters in “DSP Parameter” in the “Setup” menu. For details,
see the following:
– “Setting the broadening effect of the front sound field” (p.102)
– “Adjusting the broadening effect of the center sound field” (p.102)
– “Adjusting the difference in level between the front and surround sound fields” (p.102)
– “Adjusting the center localization (broadening effect) of the front sound field” (p.102)
81
En
n Setting Compressed Music Enhancer
n Correcting volume difference between Zone A and
Zone B
Enables/disables Compressed Music Enhancer.
Option menu
“DSP/Surround” > “Enhancer”
If you are bothered by volume difference between Zone A/B, adjust the volume for
Zone B.
Settings
Option menu
Off
Disables Compressed Music Enhancer.
On
Enables Compressed Music Enhancer.
“Volume Trim” > “ZoneB Trim”
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
NOTE
NOTE
▪ This setting is applied separately to each input source.
This setting is not effective when “ZoneB Volume” in the “Setup” menu is set to “Async.”. For details, see the
following:
▪ You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer.
▪ For details on Compressed Music Enhancer, see the following:
▪ “Adjusting the volume for Zone B in conjunction with the volume for Zone A” (p.105)
– “Playing back digitally compressed formats with enriched sound (Compressed Music Enhancer)” (p.42)
Enabling Lipsync adjustment
Correcting volume differences during playback
Enables/disables the adjustment configured in “Lipsync” in the “Setup” menu.
n Correcting volume differences between input sources
NOTE
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
For details on “Lipsync” in the “Setup” menu, see the following:
Option menu
Option menu
“Volume Trim” > “Input Trim”
“Lipsync”
▪ “Setting the adjustment method of the Lipsync function” (p.103)
Setting range
Settings
-6.0 dB to +6.0 dB (0.5 dB increments)
Off
Disables the “Lipsync” adjustment.
NOTE
On
Enables the “Lipsync” adjustment.
This setting is applied separately to each input source.
NOTE
This setting is applied separately to each input source.
n Adjusting the subwoofer volume
Fine-adjusts the subwoofer volume.
Option menu
“Volume Trim” > “Subwoofer Trim”
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
82
En
Video/audio input jacks available on the unit
Checking information about the video/audio signals
Output jacks on video device
Displays information about the video/audio signals.
Video
Option menu
“Signal Information”
Format
HDMI
Audio format of the input signal
The number of source channels in the input signal (front/surround/LFE)
Input jacks on the unit
Audio
Video
Audio
Digital optical
HDMI 1–4
AUDIO 1 (OPTICAL)
Digital coaxial
HDMI 1–4
AUDIO 2 (COAXIAL)
AV 1 (COAXIAL)
Analog stereo
HDMI 1–4
AUDIO 3 (AUDIO)
AV 2–3 (AUDIO)
Digital optical
AV 1–3 (VIDEO)
AUDIO 1 (OPTICAL)
Channel
For example, “3/2/0.1” means 3 front channels, 2 surround channels, and
LFE.
Sampling
The number of samples per second of the input digital signal
Necessary setting
Video In
Type and resolution of the input digital signal
Video Out
Type and resolution of the output digital signal
For example, if you have connected a video device to AV 2 (VIDEO) and AUDIO 1
(OPTICAL) jack of the unit, change the combination setting as follows.
Composite video
NOTE
The unit (rear)
To switch the information on the front display, press the cursor keys.
Video output
(composite video)
AV 2 (VIDEO) jack
AV 2
VIDEO
VIDEO
Combining audio of another input source with video
of the current input source
HDMI OUT
HDMI (HDCP2.2)
2
(HDCP2.2)
1
ARC
(BD/DVD)
FM
AUDIO 1
(TV)
3
ANTENNA
(RADIO)
V
4
NETWORK
V
(NET)
SPEAKERS
AM
75 Ω
OPTICAL
AUDI0 2
COAXIAL
Select the audio of a different input source to play back together with the video of the
currently selected input source. For example, use this function in the following cases.
AV 1
AV 2
AV 3
VIDEO
VIDEO
VIDEO
MONITOR OUT
FRONT
SURROUND/BI-AMP
/ZONE B
CENTER
COAXIAL
Set-top box
AUDI0 3
PRE OUT
SUBWOOFER
• Connecting a playback device that supports HDMI video output, but not HDMI
audio output
OPTICAL
AUDIO 1
(TV)
OPTICAL
Option menu
O
AUDIO 1 (OPTICAL) jack
“Audio In”
Input sources
HDMI 1-4, AV 1-3
Settings
AV 1-3, AUDIO 1-3
83
En
O
Audio output
(digital optical)
1
2
Press INPUT to select “AV 2” (video input jack to be used) as the
input source.
Selecting a video source to be output with the
selected audio source
Press OPTION.
Selects a video source to be output together with the selected audio source. For
example, you can watch the video from a different source while listening to the radio.
ZONE A
Option menu
ZONE B
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
MUTE
PROGRAM
OPTION
“Video Out”
Cursor keys
AUX, AUDIO 1-3, TUNER, (network sources), AirPlay, MusicCast Link, SERVER, NET
RADIO, Bluetooth, USB
FM/AM
USB
INPUT
VOLUME
SETUPP
Input sources
OPTION
NET
BLUETOOTH
MUTE
SETUP
ENTER
OPTION
ENTER
ENTER
RETURN
Settings
DISPLAY
TOP MENU
HOME
POP-UP/MENU
RETURN
RED
GREEN
YELLOW
DISPLA
DISPLAY
BLUE
MEMORY
TUNING
TUNING
TOP MENU
HOME
POP-UP/MENU
Off
Does not output video.
HDMI 1-4, AV 1-3
Outputs video input through the corresponding video input jacks.
PRESET
3
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
FPL
FPR
SW
SR
SL
SBL SB SBR
Option menu
Use the cursor keys to select “AUDIO 1” (audio input jack to be
used).
LINK MASTER
OUT
2
ECO
“FM Mode”
Settings
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
Audio•••AUDIO1
5
Switch between stereo and monaural for FM radio reception. When the signal
reception for an FM radio station is unstable, switching to monaural may improve it.
VOL. MUTE VIRTUAL
Audio In
4
Switching between stereo and monaural for FM radio
reception
Use the cursor keys to select “Audio In” and press ENTER.
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
Stereo
Enables stereo for FM radio reception.
Monaural
Enables monaural for FM radio reception.
Press OPTION.
This completes the necessary settings.
84
En
Setting presets for radio stations
4
n Registering radio stations automatically
To start the Auto Preset process, press ENTER.
“SEARCH” appears during Auto Preset
Automatically register FM radio stations with strong signals.
OUT
2
ECO
01:FM 87.50MHz
NOTE
▪ To register AM radio stations, see the following:
NOTE
Option menu
To cancel the Auto Preset process, press RETURN.
“Preset” > “Auto Preset”
When the Auto Preset process finishes, “FINISH” appears on the front display and the
“Option” menu closes automatically.
Press FM/AM to select “TUNER” as the input source.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
Auto Preset
OUT
2
Preset
FPL
FPR
SW
SR
SL
SBL SB SBR
Clear radio stations registered to the preset numbers.
Option menu
Use the cursor keys to select “Preset” and press ENTER.
ECO
VOL. MUTE VIRTUAL
n Clearing preset stations
Press OPTION.
LINK MASTER
FPL
FPR
SL
SW
SR
SBL SB SBR
The Auto Preset process starts and “SEARCH” appears during Auto
Preset.
– “Registering a radio station manually” (p.53)
▪ (U.K., Europe, Russia and Middle East models only)
Only Radio Data System broadcasting stations are registered automatically by the Auto Preset function.
2
3
VOL. MUTE VIRTUAL
Preset number from which to start the registration
▪ You can register up to 40 radio stations as presets.
1
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
“Preset” > “Clear Preset”
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
1
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
The preset number from which to start the registration is displayed on the
front display.
Press FM/AM to select “TUNER” as the input source.
“TUNER” is selected as the input source and the frequency currently
selected is displayed on the front display.
NOTE
2
3
To specify the preset number from which to start the registration, press cursor keys or PRESET to
select a preset number.
Press OPTION.
Use the cursor keys to select “Preset” and press ENTER.
LINK MASTER
OUT
2
ECO
Preset
4
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
Use the cursor keys to select “CLEAR”.
This step is skipped when clearing DAB radio stations.
85
En
5
2
Use the cursor keys to select a preset station to be cleared and
press ENTER.
LINK MASTER
OUT
2
ECO
The traffic information station search will start in 5 seconds. Press ENTER
again to start the search immediately.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
01:FM 98.50MHz
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
NOTE
Preset station to be cleared
▪ To search upward/downward from the current frequency, press the cursor keys while “READY”
is displayed.
If the preset station is cleared, “Cleared” appears and then the next in-use
preset number is displayed.
▪ To cancel the search, press RETURN.
The following screen appears for about 3 seconds when the search
finishes.
01:Cleared
6
7
Use the cursor keys to select “Traffic Program” and press ENTER.
LINK MASTER
OUT
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
TP FM101.30MHz
Repeat step 5 until all desired preset stations are cleared.
VOL. MUTE VIRTUAL
FPL
FPR
SL
SW
SR
SBL SB SBR
Traffic information station (frequency)
Press OPTION.
NOTE
This completes the clearing preset stations.
“TP Not Found” appears for about 3 seconds when no traffic information stations are found.
Receiving traffic information automatically
Configuring the shuffle setting
(U.K., Europe, Russia and Middle East models only)
Configure the shuffle setting for playback.
When “TUNER” is selected as the input source, the unit automatically searches for a
traffic information station.
Option menu
Option menu
“Shuffle”
“Traffic Program”
Settings
1
2
ECO
When “TUNER” is selected as the input source, press OPTION.
Off
Turns off the shuffle function.
On
Plays back songs in the current album (folder) in random order.
NOTE
This setting is available only when “USB” or “SERVER” is selected as the input source.
86
En
Configure the repeat setting for playback.
Adding an Internet radio station to the “Favorites”
folder
Option menu
Register the currently playing Internet radio station to the “Favorites” folder.
“Repeat”
Option menu
Settings
“Add to favorites”
Configuring the repeat setting
Off
Turns off the repeat function.
One
Plays back the current song repeatedly.
All
Plays back all songs in the current album (folder) repeatedly.
1
2
NOTE
This setting is available only when “USB” or “SERVER” is selected as the input source.
While listening to Internet radio, press OPTION.
Use the cursor keys to select “Add to favorites” and press
ENTER.
When the registering process finishes, the “Option” menu closes
automatically.
Enabling volume control via AirPlay
Enables/disables volume control from iTunes/iPhone via AirPlay. When other than “Off”
is set, you can adjust the unit’s volume from the iTunes/iPhone during playback.
Option menu
Removing an Internet radio station from the
“Favorites” folder
Remove an Internet radio station from the “Favorites” folder.
“Volume Interlock”
Option menu
Settings
“Remove from favorites”
Off
Disables volume control from iTunes/iPhone.
Limited
Enables volume control from iTunes/iPhone within the limited range
(-80 dB to -20 dB and mute).
Full
Enables volume control from iTunes/iPhone in the full range
(-80 dB to +16.5 dB and mute).
1
2
3
Use the cursor keys to select the station to be removed from the
“Favorites” folder.
Press OPTION.
Use the cursor keys to select “Remove from favorites” and press
ENTER.
When the removing process finishes, the “Option” menu closes
automatically.
87
En
(RX-D485 only)
Checking reception strength of each DAB channel
label
Perform an initial scan for searching DAB radio stations.
(RX-D485 only)
Option menu
You can check reception strength of each DAB channel label.
“Init Scan”
Option menu
Performing an initial scan for DAB radio reception
1
2
3
4
“Tune AID”
Press FM/DAB to select the DAB band.
1
2
3
4
Press OPTION.
Use the cursor keys to select “Init Scan” and press ENTER.
Press ENTER to start an initial scan.
When the initial scan finishes, the unit automatically tunes into the first
DAB radio station as stored in station order.
Press FM/DAB to select the DAB band.
Press OPTION.
Use the cursor keys to select “Tune AID” and press ENTER.
Use the cursor keys to select the desired DAB channel label.
The reception strength of DAB channel label is displayed in 0 (none) to
100 (best).
NOTE
▪ If you perform an initial scan again, the DAB radio stations currently registered to the preset numbers will
be cleared.
5
▪ If no DAB radio stations are found by an initial scan, press ENTER to start an initial scan again.
Press OPTION.
This completes the checking.
88
En
CONFIGURATIONS
Configuring various functions (Setup menu)
Basic operation of the Setup menu
2
Use the cursor keys to select a menu and press ENTER.
Perform the following basic procedure to operate the “Setup” menu. You can configure
the unit’s various functions with the “Setup” menu.
NOTE
▪ If new firmware is available, the message screen appears.
▪ If new firmware is available, the envelope icon (p) appears in the screen.
▪ For details on firmware updating, see the following:
– “Firmware updates” (p.134)
1
Press SETUP.
ZONE A
ZONE B
SLEEP
SCENE
BD
DVD
TV
NET
RADIO
STRAIGHT
DIRECT
ENHANCER
BASS
MUTE
PROGRAM
FM/AM
USB
INPUT
VOLUME
SETUPP
OPTION
OPTION
SETUP
NET
BLUETOOTH
MUTE
SETUP
ENTER
OPTION
ENTER
RETURN
TOP MENU
3
4
5
DISPLAY
HOME
POP-UP/MENU
RETURN
RED
GREEN
YELLOW
DISPLA
DISPLAY
BLUE
MEMORY
TUNING
TUNING
TTOP
TO
OP MEN
MENU
ME
NU
HOME
HOME
POP-UP
PO
POP-UP/MENU
P-UP//MENU
PRESET
Use the cursor keys to select an item and press ENTER.
Use the cursor keys to select a setting and press ENTER.
Press SETUP.
This completes the settings.
NOTE
For details on the default settings, see the following:
▪ “Default settings of the Setup menu” (p.157)
89
En
Setup menu items
Use the following table to configure various functions of the unit.
Menu
Item
Configuration
Speaker
Function
Selects a speaker system.
Subwoofer
Selects whether or not a subwoofer is connected.
p.93
Front
Selects the size of the front speakers.
p.94
Center
Selects whether or not a center speaker is connected and its size.
p.94
Surround
Selects whether or not surround speakers are connected and their size.
p.95
p.93
p.95
Crossover
Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”.
Subwoofer Phase
Sets the phase of the subwoofer.
p.96
Extra Bass
Enables/disables Extra Bass.
p.96
Enables/disables the front 5-channel speaker (Virtual CINEMA FRONT) configuration.
p.96
Virtual CINEMA FRONT
HDMI
Page
Power Amp Assign
Distance
Sets the distance between each speaker and the listening position.
p.96
Level
Adjusts the volume of each speaker.
p.97
Equalizer
Adjusts the tone with an equalizer.
p.97
Test Tone
Enables/disables the test tone output.
p.98
HDMI Control
Enables/disables HDMI Control.
p.99
Audio Output
Enables/disables audio output from a TV.
p.99
p.99
Standby Through
Selects whether to output video/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
4K Upscaling
Enables/disables the upscaling function.
p.99
HDCP Version
Selects the version of HDCP used on the HDMI input jacks.
p.100
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input.
p.100
Standby Sync
Selects whether to use HDMI control to link the standby behavior of the TV and the unit.
p.100
ARC
Enables/disables ARC.
p.100
SCENE
Enables/disables SCENE link playback.
p.101
90
En
Menu
Item
DSP Parameter
Sound
Lipsync
Dialogue
Volume
ECO
Function
Network
Function
Page
Panorama
Enables/disables the broadening effect of the front sound field.
p.102
Center Width
Adjusts the broadening effect of the center sound field.
p.102
p.102
Dimension
Adjusts the difference in level between the front and surround sound fields.
Center Image
Adjusts the center localization (broadening effect) of the front sound field.
p.102
Monaural Mix
Enables/disables monaural sound output.
p.103
Select
Selects the method to adjust the delay between video and audio output.
p.103
Adjustment
Adjusts the delay between video and audio output manually.
p.103
Dialogue Level
Adjusts the volume of dialogue sounds.
p.103
Scale
Switches the scale of the volume display.
p.104
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
p.104
Max Volume
Sets the limit value of the volume.
p.104
Initial Volume
Sets the initial volume for when this receiver is turned on.
p.104
ZoneB Volume
Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A.
p.105
Auto Power Standby
Set the amount of time for the auto-standby function.
p.106
ECO Mode
Enables/disables the eco mode (power saving mode).
p.106
p.107
Input Rename
Changes the input source name displayed on the front display.
Input Skip
Set which input sources are skipped when operating the INPUT key.
p.108
Dimmer
Adjusts the brightness of the front display.
p.108
Memory Guard
Prevents accidental changes to the settings.
p.108
Remote Color Key
Set the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.
p.109
Information
Displays the network information of the unit.
p.110
Network Connection
Selects the network connection method.
p.110
IP Address
Configures the network parameters (such as IP address).
p.110
MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
p.111
DMC Control
Selects whether to allow a Digital Media Controller (DMC) to control playback.
p.112
Network Standby
Selects whether to enable/disable the function that turns on the unit from other network devices.
p.112
Network Name
Edits the network name (the unit’s name on the network) displayed on other network devices.
p.113
MusicCast Link Power Interlock
Selects whether turning on the power of the master device of the MusicCast network (this unit) also turns on the
power of other devices of the network.
p.113
Network Update
Updates the firmware via the network.
p.113
91
En
Menu
Bluetooth
Item
Function
Bluetooth
Enables/disables the Bluetooth functions.
p.114
Disconnect
Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit.
p.114
Bluetooth Standby
Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby).
p.114
Transmitter
Enables/disables the Bluetooth audio transmitter function.
p.115
Device Search
Searches available Bluetooth devices (speakers/headphones) when the unit is used as a Bluetooth audio transmitter.
p.115
Select an on-screen menu language.
p.116
Audio Receive
Audio Send
Language
Page
92
En
Configuring the speaker settings
Setting your speaker system
Setting the use of a subwoofer
Select the setting according to the speakers that are connected.
Selects the setting according to the use of your subwoofer.
Setup menu
Setup menu
“Speaker” > “Configuration” > “Power Amp Assign”
“Speaker” > “Configuration” > “Subwoofer”
Settings
Settings
Surround
Select this option when you use a normal speaker system (not using Zone
B speakers or a bi-amp connections).
BI-AMP
Select this option when you connect front speakers that support bi-amp
connections.
Zone B
Select this option when you use Zone B speakers in addition to the
speaker system in the main zone (Zone A).
Select this option when a subwoofer is connected.
Use
The subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
Select this option when no subwoofer is connected.
None
NOTE
For details on the speaker system, see the following:
▪ “Speaker systems and speakers to be connected” (p.17)
▪ “Connecting front speakers that support bi-amp connections” (p.23)
▪ “Playing back music in multiple rooms” (p.43)
93
En
The front speakers will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
Setting the size of the front speakers
Setting the use of a center speaker and its size
Selects the setting according to the size of your front speakers.
Selects the setting according to the use and size of your center speaker.
Setup menu
Setup menu
“Speaker” > “Configuration” > “Front”
“Speaker” > “Configuration” > “Center”
Settings
Settings
Select this option for small speakers.
Small
Select this option for small speakers.
Small
The subwoofer will produce front channel low-frequency components
(configurable in “Crossover”).
Select this option for large speakers.
Large
The subwoofer or front speakers will produce center channel lowfrequency components (configurable in “Crossover”).
Select this option for large speakers.
Large
The front speakers will produce all of the front channel frequency
components.
NOTE
None
▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6‑1/4”) or larger, or “Small” if it is smaller than 16 cm (6‑1/4”).
NOTE
▪ “Front” is automatically set to “Large” when “Subwoofer” is set to “None”. For details on “Subwoofer” in the
“Setup” menu, see the following:
Select this option when no center speaker is connected.
The front speakers will produce center channel audio.
When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6.1/4”) or larger, or “Small” if it is smaller than 16 cm (6.1/4”).
– “Setting the use of a subwoofer” (p.93)
94
The center speaker will produce all of the center channel frequency
components.
En
Setting the use of surround speakers and their size
Setting the crossover frequency of the low-frequency
components
Selects the setting according to the use and size of your surround speakers.
Setup menu
Sets the lower limit of the low-frequency components that can be output from a
speaker whose size is set to “Small”. A frequency sound lower than the specified value
will be produced from the subwoofer or front speakers.
“Speaker” > “Configuration” > “Surround”
Settings
Setup menu
Select this option for small speakers.
Small
Large
“Speaker” > “Configuration” > “Crossover”
The subwoofer or front speakers will produce surround channel lowfrequency components (configurable in “Crossover”).
Settings
Select this option for large speakers.
40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
The surround speakers will produce all of the surround channel frequency
components.
NOTE
If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
Select this option when no surround speakers are connected.
None
The front speakers will produce surround channel audio. Virtual CINEMA
DSP works in this case.
NOTE
▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6.1/4”) or larger, or “Small” if it is smaller than 16 cm (6.1/4”).
▪ For details on Virtual CINEMA DSP, see the following:
– “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.39)
95
En
Setting the phase of the subwoofer
Setting the use of Virtual CINEMA FRONT
Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch
the subwoofer phase.
Selects whether to use Virtual CINEMA FRONT.
NOTE
Setup menu
Select “On” only when utilizing the Virtual CINEMA FRONT configuration. For details, see the following:
“Speaker” > “Configuration” > “Subwoofer Phase”
▪ “Using Virtual CINEMA FRONT” (p.22)
Settings
Setup menu
Normal
Does not reverse the subwoofer phase.
“Speaker” > “Configuration” > “Virtual CINEMA FRONT”
Reverse
Reverses the subwoofer phase.
Settings
NOTE
Off
Disables Virtual CINEMA FRONT
This setting is not available when “Subwoofer” is set to “None”. For details on “Subwoofer” in the “Setup”
menu, see the following:
On
Enables Virtual CINEMA FRONT
NOTE
▪ “Setting the use of a subwoofer” (p.93)
This setting is not available when “Surround” is set to “None”. For details on “Surround” in the “Setup” menu,
see the following:
Setting the use of Extra Bass
▪ “Setting the use of surround speakers and their size” (p.95)
Enables/disables Extra Bass. When Extra Bass is enabled, you can enjoy enhanced
bass sounds, regardless of the size of the front speakers and the presence or
absence of the subwoofer.
Setting the distance between each speaker and the
listening position
Setup menu
Sets the distance between each speaker and the listening position so that sounds from
the speakers reach the listening position at the same time.
“Speaker” > “Configuration” > “Extra Bass”
Settings
Off
Disables Extra Bass.
On
Enables Extra Bass.
Setup menu
“Speaker” > “Distance”
Choices
NOTE
Front L, Front R, Center, Surround L, Surround R, Subwoofer
You can also use BASS on the remote control to enable/disable Extra Bass.
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments
NOTE
Select the unit of distance from “Meter” or “Feet” in “Unit”.
96
En
Adjusting the volume of each speaker
Setting the equalizer
Adjusts the volume of each speaker to suit your listening position.
Selects the type of equalizer to be used and adjusts the tone.
Setup menu
Setup menu
“Speaker” > “Level”
“Speaker” > “Equalizer” > “EQ Select”
Choices
Settings
Front L, Front R, Center, Surround L, Surround R, Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
NOTE
Test tone output helps you to adjust the speaker balance while confirming its effect. For details, see the
following:
PEQ
Applies the parametric equalizer values obtained by the YPAO
measurement.
GEQ
Select this option when you want to adjust the equalizer manually.
Off
Does not use the equalizer.
When selecting “GEQ”
1
▪ “Outputting test tones” (p.98)
2
Use the cursor keys to select “Channel” and to select the desired
speaker channel.
Use the cursor keys to select the desired band (frequency) and to
adjust the gain.
Setting range
-6.0 dB to +6.0 dB
3
Press SETUP.
This completes the settings.
NOTE
▪ Test tone output helps you to adjust the equalizer while confirming its effect. For details, see the following:
– “Outputting test tones” (p.98)
▪ “PEQ” is available only when the YPAO has been performed. For details on the YPAO, see the following:
– “Optimizing the speaker settings automatically (YPAO)” (p.33)
97
En
Outputting test tones
Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Setup menu
“Speaker” > “Test Tone”
Settings
Off
Does not output test tones.
On
Outputs test tones automatically when you adjust the speaker balance or
equalizer.
98
En
Configuring the HDMI settings
Setting the use of HDMI Control
Setting the use of HDMI Standby Through
Enables/disables HDMI Control. HDMI Control allows you to operate external devices
via HDMI.
Select whether to output video/audio (input through HDMI jacks) to the TV when the
unit is in standby mode.
Setup menu
NOTE
“HDMI” > “HDMI Control”
If this function is set to “On” or “Auto”, you can use the input selection keys (HDMI 1–4) to select an HDMI
input even when the unit is in standby mode (the standby indicator on the unit blinks).
Settings
Off
Setup menu
Disables HDMI Control.
“HDMI” > “Standby Through”
Enables HDMI Control.
On
Settings
Configure the settings in “TV Audio Input”, “Standby Sync”, “ARC”, and
“SCENE”.
NOTE
To use HDMI control, you need to perform the HDMI Control link setup after connecting HDMI Controlcompatible devices. For details, see the following:
▪ “HDMI Control and synchronized operations” (p.148)
On
Outputs video/audio to the TV.
(The unit consumes more power than when “Off” or “Auto” is selected.)
– “Setting the use of HDMI Control” (p.99)
Setting the use of 4K upscaling of the HDMI video
signal
For details on “HDMI Control” in the “Setup” menu, see the following:
Enables/disables the upscaling function. When it is enabled, 1080p content is
displayed at 4K resolution.
▪ “Setting the use of HDMI Control” (p.99)
Setup menu
Setup menu
“HDMI” > “Audio Output”
“HDMI” > “4K Upscaling”
Settings
Enables audio output from the TV.
Automatically selects whether to output video/audio depending on the
status of the connected device.
▪ For details on “HDMI Control” in the “Setup” menu, see the following:
NOTE
On
Auto
▪ “Off” is not selectable when “HDMI Control” is set to “On”.
Enables/disables audio output from a TV connected to the HDMI OUT jack when
“HDMI Control” is set to “Off”.
Disables audio output from the TV.
Does not output video/audio to the TV.
NOTE
Setting the output of HDMI audio from the TV
speaker
Off
Off
Settings
99
Off
Disables the upscaling function.
On
Enables the upscaling function.
En
Linking the standby modes of the unit and the TV
Setting the version of HDCP used on the HDMI input
jacks
Select whether to use HDMI control to link the unit's standby mode to the TV's power
when “HDMI Control” is set to “On”.
Selects the HDCP version of the HDMI input jacks for watching 4K video content.
NOTE
Setup menu
For details on “HDMI Control” in the “Setup” menu, see the following:
“HDMI” > “HDCP Version”
▪ “Setting the use of HDMI Control” (p.99)
Input sources
Setup menu
HDMI 1–4
“HDMI” > “Standby Sync”
Settings
Settings
Auto
Automatically sets the version of HDCP according to content.
1.4
Sets the version of HDCP to always be 1.4.
Off
Does not set the unit to standby mode when the TV is turned off.
On
Sets the unit to standby mode when the TV is turned off.
Setting the audio jack used for TV audio input
Auto
Sets the unit to standby mode when the TV is turned off only when the unit
is receiving TV audio or HDMI signals.
Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control” is set to “On”. The unit’s input source automatically switches to TV audio when
the TV input is switched to its built-in tuner.
Setting the use of ARC
NOTE
For details on “HDMI Control” in the “Setup” menu, see the following:
Select whether to output TV audio to the speakers connected to the unit when “HDMI
Control” is set to “On”.
NOTE
▪ “Setting the use of HDMI Control” (p.99)
For details on “HDMI Control” in the “Setup” menu, see the following:
Setup menu
▪ “Setting the use of HDMI Control” (p.99)
“HDMI” > “TV Audio Input”
Setup menu
Settings
“HDMI” > “ARC”
AV 1–3, AUDIO 1–3
Settings
NOTE
When using ARC to input TV audio to the unit, the input jacks selected here will be used for TV Audio Input.
Off
Disables ARC.
On
Enables ARC.
NOTE
You do not need to change this setting normally. In case noises are produced from the speakers connected
to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off”
and use the TV’s speakers.
100
En
Setting the use of SCENE link playback
Enables/disable SCENE link playback when “HDMI Control” is set to “On”.
When SCENE link playback is enabled, HDMI Control-compatible devices connected
to the unit via HDMI automatically work as follows when a scene is selected.
• TV: turning on and displaying video from the playback device
• Playback device: starting playback
NOTE
For details on “HDMI Control” in the “Setup” menu, see the following:
▪ “Setting the use of HDMI Control” (p.99)
Setup menu
“HDMI” > “SCENE”
Choices (SCENE keys)
BD / DVD, TV, NET, RADIO
Settings
Off
Disables SCENE link playback for the selected SCENE key.
On
Enables SCENE link playback for the selected SCENE key.
NOTE
SCENE link playback may not work properly due to the compatibility between devices. We recommend using
TV and playback devices from the same manufacturer so that HDMI Control works more effectively.
101
En
Configuring the sound settings
Setting the broadening effect of the front sound field
Enables/disables the broadening effect of the front sound field. When this function is
enabled, you can wrap front left/right channel sounds around the sound field and
generate a spacious sound field in combination with the surround sound field. This
setting is effective when “DPL Music” is selected.
Adjusting the difference in level between the front
and surround sound fields
Adjusts the difference in level between the front and surround sound fields. Higher to
strengthen the front sound field and lower to strengthen the surround sound field. This
setting is effective when “DPL Music” is selected.
Setup menu
Setup menu
“Sound” > “DSP Parameter” > “Panorama”
“Sound” > “DSP Parameter” > “Dimension”
Settings
Setting range
Off
Disables the broadening effect of the front sound field.
On
Enables the broadening effect of the front sound field.
-3 to +3
NOTE
NOTE
For details on the surround decoder, see the following:
For details on the surround decoder, see the following:
▪ “Selecting the surround decoder used in the program” (p.81)
▪ “Selecting the surround decoder used in the program” (p.81)
Adjusting the center localization (broadening effect)
of the front sound field
Adjusting the broadening effect of the center sound
field
Adjusts the center localization (broadening effect) of the front sound field. Adjust this
higher to strengthen the center localization (less broadening effect) or lower to weaken
it (more broadening effect). This setting is effective when “Neo:6 Music” is selected.
Adjusts the broadening effect of the center sound field. Higher to enhance the
broadening effect, and lower to reduce it (closer to center). This setting is effective
when “DPL Music” is selected.
Setup menu
Setup menu
“Sound” > “DSP Parameter” > “Center Image”
“Sound” > “DSP Parameter” > “Center Width”
Setting range
Setting range
0.0 to 1.0
0 to 7
NOTE
NOTE
For details on the surround decoder, see the following:
For details on the surround decoder, see the following:
▪ “Selecting the surround decoder used in the program” (p.81)
▪ “Selecting the surround decoder used in the program” (p.81)
102
En
Setting the use of Monaural Mix
Adjusting the delay of the Lipsync function
Enables/disables monaural sound output. This function can be applicable when the
sound program is set to “5ch Stereo” only.
Adjusts the delay between video and audio output manually when “Select” is set to
“Manual”. You can fine-adjust the audio output timing when “Select” is set to “Auto”.
Setup menu
Setup menu
“Sound” > “DSP Parameter” > “Monaural Mix”
“Sound” > “Lipsync” > “Adjustment”
Settings
Setting range
Off
Disables monaural sound output.
0 ms to 500 ms (1 ms increments)
On
Enables monaural sound output.
NOTE
For details on “Select” in the “Setup” menu, see the following:
Setting the adjustment method of the Lipsync
function
▪ “Setting the adjustment method of the Lipsync function” (p.103)
Adjusting the volume of dialogue sound
Selects the method for adjusting the delay between video and audio output.
Adjusts the volume of dialogue sounds that are hardly heard.
Setup menu
Setup menu
“Sound” > “Lipsync” > “Select”
“Sound” > “Dialogue” > “Dialogue Level”
Settings
Manual
Setting range
Select this option when you want to adjust the delay between video and
audio output manually.
0 to 3 (higher to strengthen)
Adjust the audio output timing in “Adjustment”.
Auto
Adjusts the delay between video and audio output automatically when a
TV that supports an automatic lipsync function is connected to the unit via
HDMI.
If necessary, you can fine-adjust the audio output timing in “Adjustment”.
NOTE
▪ You can enable/disable the Lipsync function by input sources in “Lipsync” in the “Option” menu. For
details, see the following:
– “Enabling Lipsync adjustment” (p.82)
▪ For details on “Adjustment” in the “Setup” menu, see the following:
– “Adjusting the delay of the Lipsync function” (p.103)
103
En
Setting the scale of the volume display
Setting the limit value of the volume
Switches the scale of the volume display.
Sets the limit value of the volume adjusted by using such as VOLUME keys on the
remote control.
Setup menu
Setup menu
“Sound” > “Volume” > “Scale”
“Sound” > “Volume” > “Max Volume”
Settings
dB
Displays the volume in the “dB” unit.
0-97
Displays the volume in the numeric value (0.5 to 97.0).
Setting range
-60.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [20.0 to 95.0 (5.0 increments),
97.0]
Setting the dynamic range adjustment method
Setting the initial volume for when the unit is turned
on
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Sets the initial volume when the unit is turned on.
Setup menu
Setup menu
“Sound” > “Volume” > “Dynamic Range”
“Sound” > “Volume” > “Initial Volume”
Settings
Maximum
Produces audio without adjusting the dynamic range.
Standard
Optimizes the dynamic range for regular home use.
Settings
Sets the dynamic range for clear sound even at night or at low volumes.
Min/Auto
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
Off
Sets the level to the volume level of the unit when it last entered standby
mode.
Mute
Sets the unit to mute the audio output.
-80.0 dB to +16.5 dB
(0.5 dB increments)
[0.5 to 97.0
(0.5 increments)]
Sets the level to the specified volume level.
NOTE
This setting works only when the volume level is set lower than “Max Volume”. For details on “Max Volume” in
the “Setup” menu, see the following:
▪ “Setting the limit value of the volume” (p.104)
104
En
Adjusting the volume for Zone B in conjunction with
the volume for Zone A
Selects whether to adjust the volume for Zone B in conjunction with the volume for
Zone A.
Setup menu
“Sound” > “Volume” > “ZoneB Volume”
Settings
Sync.
Adjusts the volume for Zone B in conjunction with the volume for Zone A.
Async.
Does not adjust the volume for Zone B in conjunction with the volume for
Zone A. Adjust the volume for Zone B separately.
NOTE
If “ZoneB Volume” is set to “Async.”, the volume for Zone B is temporarily set to -40 dB. As necessary, adjust
the volume using the remote control. For details, see the following:
▪ “Adjusting the volume for Zone B separately” (p.45)
105
En
Configuring the power supply settings
Setting the amount of time for the auto-standby
function
Set the amount of time for the auto-standby function.
Setup menu
“ECO” > “Auto Power Standby”
Settings
Off
Does not set the unit to standby mode automatically.
5 minutes, 20 minutes
Sets the unit to standby mode when you have not operated the unit and
the unit has not detected any input signal for the specified time.
2 hours, 4 hours,
8 hours, 12 hours
Sets the unit to standby mode when you have not operated the unit for the
specified time.
NOTE
Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front
display.
Setting the use of the eco mode
You can reduce the unit’s power consumption by setting the eco mode to “On”. After
changing the setting, be sure to press ENTER to restart the unit.
When the eco mode is enabled, you can reduce the unit’s power consumption.
Setup menu
“ECO” > “ECO Mode”
Settings
Off
Disables the eco mode.
On
Enables the eco mode.
NOTE
▪ When “ECO Mode” is set to “On”, the front display may become dark.
▪ If you want to play audio at high volume, set “ECO Mode” to “Off”.
106
En
Configuring the function settings
Automatically changing the input source names
displayed on the front display
Manually changing the input source names
displayed on the front display
Automatically changes the input source names displayed on the front display. You can
select a name created by the Auto Rename function.
Allows the input source names displayed on the front display to be set manually.
Setup menu
“Function” > “Input Rename”
“Function” > “Input Rename”
Input sources
Input sources
HDMI 1-4, AV 1-3, AUX, AUDIO 1-3, TUNER, MusicCast Link, SERVER, NET RADIO,
USB
HDMI 1-4, AV 1-3, AUDIO 1-2
1
2
3
4
Setup menu
1
2
Use the cursor keys to select an input source to be renamed.
Use the cursor keys to select “Auto”.
Use the cursor keys to select an input source to be renamed.
Use the cursor keys to select “Manual” and press ENTER.
The edit screen is displayed.
To change another input source name, repeat steps 1 to 2.
3
Press SETUP.
This completes the settings.
Use the cursor keys and ENTER key to edit the name, and then
select “OK” and press ENTER.
NOTE
▪ To cancel the entry, select “CANCEL”.
NOTE
▪ If you select "RESET", the default input name will be inserted into the editing area.
When “Auto” is selected, the created name is saved even after the external device is disconnected. To reset
to the default setting, switch the setting to “Manual” and then back to “Auto”.
4
5
To change another input source name, repeat steps 1 to 3.
Press SETUP.
This completes the settings.
107
En
Setting input sources to be skipped when operating
the INPUT key
Adjusting the brightness of the front display
Adjusts the brightness of the front display.
Set which input sources are skipped when operating the INPUT key.
Setup menu
You can select the desired input source quickly by using this function.
“Function” > “Dimmer”
Setup menu
Setting range
“Function” > “Input Skip”
-4 to 0 (higher to brighten)
Input sources
NOTE
HDMI 1-4, AV 1-3, AUX, AUDIO 1-3, TUNER, NET, Bluetooth, USB
The front display may become dark when “ECO Mode” is set to “On”. For details, see the following:
Settings
▪ “Setting the use of the eco mode” (p.106)
Off
Does not skip the selected input source.
On
Skips the selected input source.
Preventing accidental changes to the settings
Prevents accidental changes to the settings.
NOTE
Setup menu
When using AV CONTROLLER, you cannot select the input sources set to “On” in this function.
“Function” > “Memory Guard”
Settings
Off
Does not protect the settings.
On
Protects the settings until “Off” is selected.
NOTE
When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.
108
En
Setting the unit's functions for the RED/GREEN/
YELLOW/BLUE keys of the remote control
Set the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control.
Setup menu
“Function” > “Remote Color Key”
Settings
Default
Assigns the functions of devices connected to the unit with an HDMI
cable.
This setting is effective when “HDMI Control” is set to “On”.
Assigns the unit's input sources to each key. The assigned input sources
can be set separately.
Input
Input sources
HDMI 1-4, AV 1-3, AUX, AUDIO 1-3, TUNER, NET, Bluetooth, USB
Default
RED: HDMI2, GREEN: HDMI4, YELLOW: AV 2, BLUE: AUX
Assigns the functions of sound mode to each key.
RED: MOVIE
Program
GREEN: MUSIC
YELLOW: STEREO
BLUE: SUR.DECODE
Assigns the functions of TV Control to each key.
RED: EXIT (closes the menu on the TV)
TV Control
GREEN: INFO (displays information about the TV such as the resolution)
YELLOW: BROADCAST (switches the TV broadcast type)
BLUE: INPUT (switches the TV input)
This setting is effective when “HDMI Control” is set to “On”.
NOTE
▪ For details on “HDMI Control” in the “Setup” menu, see the following:
– “Setting the use of HDMI Control” (p.99)
▪ To use HDMI control, you need to perform the HDMI Control link setup after connecting HDMI Controlcompatible devices. For details, see the following:
– “HDMI Control and synchronized operations” (p.148)
▪ HDMI Control might not work properly.
109
En
Configuring the network settings
Checking the network information of the unit
Displays the network information of the unit.
Setting the network connection method (Wired/
Wireless)
Setup menu
Selects the network connection method.
“Network” > “Information”
Setup menu
Status
The connection status of the NETWORK jack
“Network” > “Network Connection”
Connection
Connection method
Choices
SSID
The access point to which the unit is connected
MusicCast Network
Readiness or not for the MusicCast Network
Wired
Select this option when you want to connect the unit to a network with
a commercially-available network cable.
MAC address
Wireless(Wi-Fi)
Select this option when you want to connect the unit to a network via
the wireless router (access point).
IP Address
IP address
Subnet Mask
Subnet mask
NOTE
Default Gateway
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
DNS Server (S)
The IP address of the secondary DNS server
MAC Address (Ethernet)
MAC Address (Wi-Fi)
For details on the network connection, see the following:
▪ “Preparing for connecting to a network” (p.29)
Setting the network parameters automatically
(DHCP)
Set the network parameters (such as IP address, Subnet Mask, and Default Gateway)
automatically using a DHCP server.
Setup menu
“Network” > “IP Address” > “DHCP”
Settings
110
Off
Does not use a DHCP server. Configure the network parameters manually.
On
Uses a DHCP server to automatically obtain the unit’s network parameters
(such as IP address).
En
Setting the network parameters manually
Setting the MAC address filter
Set the network parameters (such as IP address, Subnet Mask, and Default Gateway)
manually.
Sets the MAC address filter to limit access to the unit from other network devices.
Setup menu
▪ Operation of the AirPlay function or the DMC is not limited by this setting.
“Network” > “IP Address”
1
2
3
4
5
NOTE
▪ You can specify up to 10 network devices that are permitted to access the unit.
Setup menu
Set “DHCP” to “Off”.
“Network” > “MAC Address Filter” > “Filter”
Settings
Use the cursor keys to select a parameter type.
IP Address
Specifies an IP address.
Subnet Mask
Specifies a subnet mask.
Default Gateway
Specifies the IP address of the default gateway.
DNS Server (P)
Specifies the IP address of the primary DNS server.
DNS Server (S)
Specifies the IP address of the secondary DNS server.
Off
Disables the MAC address filter.
On
Enables the MAC address filter. Specify the MAC addresses of the
network devices that will be permitted access to the unit.
When selecting “On”
1
2
Use the cursor keys to move the edit position and to select a
value.
To set another parameter, press RETURN and repeat steps 2 to 3.
3
Press SETUP.
4
This completes the settings.
Use the cursor keys to select an MAC address number.
Use the cursor keys to move the edit position and to select a
value.
To specify another MAC address, press RETURN and repeat steps
1 to 2.
Press SETUP.
This completes the settings.
111
En
Setting the use of a Digital Media Controller
Setting the use of the Network Standby function
Selects whether to allow a Digital Media Controller (DMC) to control playback. A Digital
Media Controller (DMC) is a device that can control other network devices through the
network. When this function is enabled, you can control playback of the unit from
DMCs (such as Windows Media Player 12) on the same network.
Selects whether the unit can be turned on from other network devices (network
standby).
Setup menu
Setup menu
“Network” > “Network Standby”
Settings
“Network” > “DMC Control”
Off
Settings
Disable
Does not allow DMCs to control playback.
Enable
Allows DMCs to control playback.
On
Disables the network standby function.
Enables the network standby function.
(The unit consumes more power than when “Off” is selected.)
Enables the network standby function.
Auto
(If “Network Connection” is set to “Wired”, the unit is set to the power
saving mode when the network cable is disconnected.)
With an advanced energy saving design, this product achieves a low power
consumption of not more than two watts when in Network Standby mode.
112
En
Setting the network name of the unit
Updating the firmware via the network
Edits the network name (the unit’s name on the network) displayed on other network
devices.
Updates the firmware via the network. You can select “Perform Update” after the unit is
ready for firmware update. You can also check the firmware version and system ID.
Setup menu
Setup menu
“Network” > “Network Name”
“Network” > “Network Update”
1
2
3
4
NOTE
Press ENTER to enter the name edit screen.
▪ Firmware update takes about 20 minutes or more.
▪ If the Internet connection speed is slow, or the unit is connected to the wireless network, network update
may not be possible depending on the condition of the network. In this case, wait until firmware update is
ready, or update the firmware using the USB memory device. For details on using the USB memory
device, see the following:
Use the cursor keys and ENTER key to edit the name.
Select “OK” to confirm the new name and press ENTER.
– “Updating the firmware (UPDATE)” (p.120)
Press SETUP.
This completes the settings.
Setting the power interlock from the unit to
MusicCast compatible devices
Selects whether turning on the power of the master device of the MusicCast network
(this unit) also turns on the power of other devices of the network.
Setup menu
“Network” > “MusicCast Link Power Interlock”
Settings
Off
Disables the power interlock from the unit (MusicCast master).
On
Enables the power interlock from the unit (MusicCast master).
113
En
Configuring the Bluetooth® settings
Setting the use of Bluetooth®
Setting the use of the Bluetooth® Standby function
Enables/disables the Bluetooth function.
Selects whether to enable/disable the function that turns on the unit from Bluetooth
devices (Bluetooth standby). If this function is set to “On”, the unit automatically turns
on when a connect operation is performed on the Bluetooth device.
Setup menu
“Bluetooth” > “Bluetooth”
Setup menu
Settings
“Bluetooth” > “Audio Receive” > “Bluetooth Standby”
Off
Disables the Bluetooth function.
On
Enables the Bluetooth function.
Settings
Terminating the connection between a Bluetooth®
device and the unit
Off
Disables the Bluetooth standby function.
On
Enables the Bluetooth standby function.
(The unit consumes more power than when “Off” is selected.)
NOTE
This setting is not available when “Network Standby” is set to “Off”. For details, see the following:
Terminates the Bluetooth connection between a Bluetooth device (such as a
smartphone) and the unit.
▪ “Setting the use of the Network Standby function” (p.112)
Setup menu
“Bluetooth” > “Audio Receive” > “Disconnect”
Select “Disconnect” and press ENTER to terminate the Bluetooth connection.
NOTE
This setting is not available when no Bluetooth devices are connected.
114
En
Setting the use of audio transmission to a Bluetooth®
device
Connecting the unit to a Bluetooth® device that
receives transmitted audio
Enables/disables the Bluetooth audio transmitter function.
When this function is enabled, you can enjoy audio played back on the unit using
Bluetooth speakers/headphones.
Establishes a connection between the unit and Bluetooth devices that receive audio
transmitted from the unit, such as speakers and headphones, when "Transmitter" is set
to "On" in the "Setup" menu.
Setup menu
NOTE
“Bluetooth” > “Audio Send” > “Transmitter”
For details on “Transmitter” in the “Setup” menu, see the following:
▪ “Setting the use of audio transmission to a Bluetooth® device” (p.115)
Settings
Off
Disables the Bluetooth audio transmitter function.
On
Enables the Bluetooth audio transmitter function.
Setup menu
“Bluetooth” > “Audio Send” > “Device Search”
1
NOTE
For details on connecting Bluetooth devices to which audio is transmitted (speakers, headphones, etc.), see
the following:
Press ENTER.
A list of Bluetooth devices that can connect to the unit is displayed.
2
▪ “Connecting the unit to a Bluetooth device that receives transmitted audio” (p.115)
®
Use the cursor keys to select the Bluetooth speakers/headphones
to be connected with the unit and press ENTER.
When the connection process finishes, “Completed” appears.
3
Press ENTER.
This completes the settings.
NOTE
▪ If the desired Bluetooth device is not displayed on the list, set the Bluetooth device to pairing mode and
then perform “Device Search” operation again.
▪ To terminate the Bluetooth connection, perform a disconnect operation on the Bluetooth speakers/
headphones.
115
En
Configuring the language settings
Setting the on-screen menu language
Select the on-screen menu language.
Setup menu
“Language”
Settings
English
English
日本語
Japanese
Français
French
Deutsch
German
Español
Spanish
Русский
Russian
Italiano
Italian
中文
Chinese
NOTE
The information on the front display is provided in English only.
116
En
Configuring the advanced settings (ADVANCED SETUP menu)
Basic operation of the ADVANCED SETUP menu
ADVANCED SETUP menu items
Perform the following basic procedure to operate the “ADVANCED SETUP” menu while
viewing the front display.
Use the following table to configure system settings of the unit.
1
2
Set the unit to standby mode.
Item
SP IMP.
While holding down STRAIGHT on the front panel, press
z (power).
Changes the speaker impedance setting.
Page
p.118
Selects the unit’s remote control ID.
p.118
TU
(Asia, Taiwan, Brazil, General, and Central and South America
models only)
p.118
Changes the FM/AM tuning frequency setting.
STRAIGHT
The top item and its setting of the “ADVANCED SETUP” menu appear on
the front display.
3
4
5
(U.S.A. and Canada models only)
REMOTE ID
z (power)
PROGRAM
Function
TV FORMAT
Switches the video signal type of HDMI output.
p.118
4K MODE
Selects the HDMI 4K signal format.
p.119
BKUP/RSTR
Backups and restores all the settings for the unit.
p.119
INIT
Restores the default settings.
p.120
UPDATE
Updates the firmware.
p.120
VERSION
Checks the version of firmware currently installed on the unit.
p.120
Press PROGRAM to select an item.
Press STRAIGHT to select a setting.
Press z (power) to set the unit to standby mode and turn it on
again.
This completes the settings.
NOTE
For details on the default settings, see the following:
▪ “Default settings of the ADVANCED SETUP menu” (p.158)
117
En
Changing the speaker impedance setting (SP IMP.)
Changing the FM/AM tuning frequency setting (TU)
(U.S.A. and Canada models only)
(Asia, Taiwan, Brazil, General, and Central and South America models only)
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
SP IMP.••8¬MIN
LINK MASTER
OUT
2
ECO
VOL. MUTE VIRTUAL
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
TU••••FM50/AM9
FPL
FPR
SW
SR
SL
SBL SB SBR
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
ADVANCED SETUP menu
ADVANCED SETUP menu
“SP IMP.”
“TU”
Settings
Settings
6 Ω MIN
Select this option when you connect 6-ohm speakers to the unit.
8 Ω MIN
Select this option when you connect 8-ohm or higher speakers to the unit.
Selecting the remote control ID (REMOTE ID)
LINK MASTER
OUT
2
ECO
Select this when you want to adjust the FM frequency by 100-kHz steps
and AM by 10-kHz steps.
FM50/AM9
Select this when you want to adjust the FM frequency by 50-kHz steps
and AM by 9-kHz steps.
Switching the video signal type (TV FORMAT)
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
REMOTE ID••ID1
FM100/AM10
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
LINK MASTER
OUT
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with
a unique remote control ID for its corresponding receiver.
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
TV FORMAT•NTSC
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
ADVANCED SETUP menu
“REMOTE ID”
Settings
ADVANCED SETUP menu
ID1, ID2
“TV FORMAT”
Changing the remote control ID of the remote control
Settings
• To select ID1, while holding down the left cursor key, hold down SCENE (BD/DVD)
for 5 seconds.
NTSC, PAL
• To select ID2, while holding down the left cursor key, hold down SCENE (TV) for 5
seconds.
118
En
Selecting the HDMI 4K signal format (4K MODE)
LINK MASTER
OUT
2
ECO
Backuping and restoring all the settings (BKUP/RSTR)
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
4K MODE•MODE 1
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
LINK MASTER
OUT
2
ECO
VOL. MUTE VIRTUAL
BKUP/RSTR•BKUP
FPL
FPR
SW
SR
SL
SBL SB SBR
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and
playback device are connected to the unit.
ADVANCED SETUP menu
ADVANCED SETUP menu
“BKUP/RSTR”
Settings
Settings
Inputs/outputs 4K signals shown in the following table. Depending on the
connected device or HDMI cables, video may not be displayed correctly.
In this case, select “MODE 2”.
MODE 2
Inputs/outputs 4K signals shown in the following table.
RSTR
Restores all the previous backuped settings.
BKUP
Backups all the settings.
1
NOTE
When “MODE 1” is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with
Ethernet.
2
Format
MODE 1
8 bit
4K/60, 50 Hz
4K/30, 25, 24 Hz
3
MODE 2
10 bit
12 bit
RGB 4:4:4
4
–
YCbCr 4:4:4
4
–
8 bit
10 bit
12 bit
–
4
–
YCbCr 4:2:2
4
YCbCr 4:2:0
4
4
–
RGB 4:4:4
4
4
–
YCbCr 4:4:4
4
4
YCbCr 4:2:2
4
FPL
FPR
SW
SR
SL
SBL SB SBR
Backups and restores all the unit's setting to a USB memory device. Prepare a USB
memory device using FAT16 or FAT32 format in advance.
“4K MODE”
MODE 1
VOL. MUTE VIRTUAL
–
Connect the USB memory device to the USB jack on the front
panel.
To start the process, press STRAIGHT to select “BKUP” or
“RSTR” and then press INFO on the front panel.
Press INFO again after the confirmation message appears on the
front display.
When “Complete” appears on the front display, press z (power)
to set the unit to standby mode and turn it on again.
If “Failed” appears on the front display, check the following and start the
process again.
–
4
119
En
In case of “BKUP”:
• You cannot overwrite save. When you save the settings repeatedly, please move the
file in different folder.
• The file is stored by the name of “MC_backup_(model name).dat” in the route of the
USB memory device.
In case of “RSTR”:
• Check that the file is stored in the route of the USB memory device.
NOTE
Restoring the default settings (INIT)
2
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
UPDATE•••••USB
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from our website to a USB memory
device. You can update the firmware using this USB memory device. For details, refer
to the information supplied with updates.
USB
Update the firmware using a USB memory device.
NETWORK
Update the firmware via the network.
NOTE
Do not perform this menu unless firmware update is necessary. Also, make sure you read the information
supplied with updates before updating the firmware.
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
INIT••••CANCEL
2
Choices
▪ The user information (such as account, password) is not saved.
OUT
OUT
“UPDATE”
▪ Do not turn off the unit during the backuping and restoring process. Otherwise, the settings may not be
restored correctly.
LINK MASTER
LINK MASTER
ECO
ADVANCED SETUP menu
▪ “RSTR” is effective after backuping all the settings.
ECO
Updating the firmware (UPDATE)
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
Restores the default settings for the unit.
Checking the firmware version (VERSION)
ADVANCED SETUP menu
“INIT”
LINK MASTER
OUT
2
ECO
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
Hi -Res ENHANCER YPAO VOL. A- DRC
VERSION••xx.xx
Choices
VOL. MUTE VIRTUAL
FPL
FPR
SW
SR
SL
SBL SB SBR
ALL
Restores the default settings for the unit.
Check the version of firmware currently installed on the unit.
CANCEL
Does not perform an initialization.
ADVANCED SETUP menu
“VERSION”
120
En
TROUBLESHOOTING
When any problem appears
n The power does not turn on in synchronization with the
If trouble occurs, first check the following:
TV
Make sure of the following when the unit does not function properly.
• The power cables of the unit, TV and playback devices (such as BD/DVD players)
are connected to AC wall outlets securely.
• The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned
on.
l HDMI Control on the unit is disabled.
If turning off the unit is not synchronized to the TV either, check the setting of HDMI
Control on the unit. For details on HDMI Control, see the following:
– “Setting the use of HDMI Control” (p.99)
l HDMI Control on the TV is disabled.
If only turning on the unit is not synchronized to the TV, check the setting on the
TV. For details, refer to the instruction manual for the TV and set HDMI Control on
the TV.
• The connectors of each cable are securely inserted in to jacks on each device.
If there is no problem with the power and cables, refer to the instructions shown in
“When any problem appears” corresponding to the trouble of the unit.
If the problem you are experiencing is not listed or if the instructions do not help, turn
off the unit, disconnect the power cable, and contact the nearest authorized Yamaha
dealer or service center.
l Because of a power failure, the unit's power is no longer synchronized.
Disconnect the HDMI cables and power cables, and after five minutes, reconnect
the cables of playback devices first, then the unit, and then the TV. Then, check
that the power is synchronized.
Power, system, or remote control trouble
n The power does not turn off
n The power does not turn on
l The protection circuitry has been activated three times consecutively.
If the standby indicator on the unit blinks when you try to turn on the power, as a
safety precaution, capability to turn on the power is disabled. Contact your nearest
Yamaha dealer or service center to request repair.
121
l The internal microcomputer has frozen, due to an external electric shock (such
as lightning or excessive static electricity) or to a drop in the power supply
voltage.
Hold down z (power) on the front panel for more than 15 seconds to reboot the
unit. If the problem persists, disconnect the power cable from the AC wall outlet
and plug it again.
En
n The power turns off (standby mode) immediately
n The unit is not reacting
l The unit was turned on while a speaker cable was shorted.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers. For details, see the following:
– “Connecting the speaker” (p.18)
l The internal microcomputer is frozen, due to an external electric shock (such
as lightning or excessive static electricity) or to a drop in the power supply
voltage.
Hold down z (power) on the front panel for more than 15 seconds to reboot the
unit. If the problem persists, disconnect the power cable from the AC wall outlet
and plug it again.
n The unit enters standby mode automatically
n The unit cannot be controlled using the remote control
l The sleep timer worked.
Turn on the unit and start playback again.
l The unit is out of the operating range.
Use the remote control within the operating range. For details, see the following:
– “Operating range of the remote control” (p.8)
l The auto-standby function activated because the unit was not used for the
specified time.
To disable the auto-standby function, set “Auto Power Standby” in the “Setup”
menu to “Off”. For details, see the following:
– “Setting the amount of time for the auto-standby function” (p.106)
l The batteries are weak.
Replace with new batteries.
l The speaker impedance setting is incorrect.
Set the speaker impedance to match your speakers. For details, see the following:
– “Changing the speaker impedance setting (SP IMP.)” (p.118)
l The unit’s remote control sensor is exposed to direct sunlight or strong
lighting.
Adjust the lighting angle, or reposition the unit.
l The protection circuitry has been activated because of a short circuit.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers. For details, see the following:
– “Connecting the speaker” (p.18)
l The remote control IDs of the unit and the remote control are not identical.
Change the remote control ID of the unit or the remote control. For details, see the
following:
– “Selecting the remote control ID (REMOTE ID)” (p.118)
l The remote control is set to the Zone B operation mode.
Set the remote control to the Zone A operation mode. For details, see the following:
– “Part names and functions of the remote control” (p.15)
122
En
n Cannot select the desired input source even if “INPUT”
Audio trouble
is pressed
n No sound
l The function which skips some input sources is set.
Set “Input Skip” of the desired input source in the “Setup” menu to “Off”. For
details, see the following:
– “Setting input sources to be skipped when operating the INPUT key” (p.108)
l Another input source is selected.
Select an appropriate input source with the input selection keys. For details, see
the following:
– “Basic procedure for playing back video and music” (p.46)
n The RED/GREEN/YELLOW/BLUE keys of the remote
l Signals that the unit cannot reproduce are being input.
Some digital audio formats cannot be played back on the unit. Ensure that the
signals are types that the unit is able to play back. For details on supported file
formats, HDMI audio formats or compatible decoding format, see the following:
– “Supported file formats” (p.147)
– “Specifications” (p.152)
control do not operate
l The device which is connected to the unit via HDMI does not support the
operation of the RED/GREEN/YELLOW/BLUE keys.
Use a device which supports the operation of the RED/GREEN/YELLOW/BLUE
keys.
l Zone B is disabled.
Slide the Zone switch to “ZONE B”, and then operate Zone B. For details, see the
following:
– “Operating the Zone B” (p.44)
l The settings of the RED/GREEN/YELLOW/BLUE keys of the unit's remote
control have been changed.
Set the “Remote Color Key” settings in the “Setup” menu to “Default”. For details,
see the following:
– “Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the
remote control” (p.109)
l The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
n The volume cannot be increased
l The maximum volume is set too low.
Use “Max Volume” in the “Setup” menu to adjust the maximum volume. For details,
see the following:
– “Setting the limit value of the volume” (p.104)
l A device connected to the output jacks of the unit is not turned on.
Turn on all devices connected to the output jacks of the unit.
123
En
n No sound is coming from a specific speaker
n No sound is coming from the subwoofer
l The playback source does not contain a signal for the channel.
To check it, use “Signal Information” in the “Option” menu. For details, see the
following:
– “Checking information about the video/audio signals” (p.83)
l The playback source does not contain Low Frequency Effect (LFE) or lowfrequency signals.
To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the
front channel low-frequency components from the subwoofer. For details, see the
following:
– “Setting the use of Extra Bass” (p.96)
l The currently selected sound program/decoder does not use the speaker.
To check it, use “Test Tone” in the “Setup” menu. For details, see the following:
– “Outputting test tones” (p.98)
l Subwoofer output is disabled.
Perform YPAO or set “Subwoofer” in the “Setup” menu to “Use”. For details, see
the following:
– “Optimizing the speaker settings automatically (YPAO)” (p.33)
– “Setting the use of a subwoofer” (p.93)
l Audio output of the speaker is disabled.
Perform YPAO or use “Configuration” in the “Setup” menu to change the speaker
settings. For details, see the following:
– “Optimizing the speaker settings automatically (YPAO)” (p.33)
– “Setting the use of a subwoofer” (p.93)
– “Setting the size of the front speakers” (p.94)
– “Setting the use of a center speaker and its size” (p.94)
– “Setting the use of surround speakers and their size” (p.95)
l The volume of the subwoofer is too low.
Adjust the volume on the subwoofer.
l The subwoofer has been turned off by its auto-standby function.
Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
l The volume of the speaker is set too low.
Perform YPAO or use “Level” in the “Setup” menu to adjust the speaker volume.
For details, see the following:
– “Optimizing the speaker settings automatically (YPAO)” (p.33)
– “Adjusting the volume of each speaker” (p.97)
n No sound from the playback device connected to the
unit with HDMI
l The TV does not support HDCP (High-bandwidth Digital Content Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
l The speaker cable connecting the unit and the speaker is defective.
Check the unit’s SPEAKERS terminals and the speaker’s terminals. If there is no
problem with the connection, replace a breaking speaker cable with another
speaker cable.
l The number of devices connected to the HDMI OUT jack exceeds the limit.
Disconnect some of the HDMI devices.
l The speaker is malfunctioning.
To check it, replace with another speaker. If the problem persists with using
another speaker, the unit may be malfunctioning.
124
En
n No sound from the TV when HDMI Control is used
n Only the front speakers work on multichannel audio
l The TV is set to output audio from the TV speakers.
Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.
l The playback device is set to output 2-channel audio (such as PCM) only.
To check it, use “Signal Information” in the “Option” menu. If necessary, change
the digital audio output setting on the playback device. For details, see the
following:
– “Checking information about the video/audio signals” (p.83)
l A TV that does not support ARC is connected to the unit only with an HDMI
cable.
Use a digital optical cable to make an audio connection. For details, see the
following:
– “HDMI connection with a TV” (p.24)
n Noise/hum is heard
l The unit is too close to another digital or radio frequency device.
Move the unit further away from the device.
l If the TV is connected to the unit with an audio cable, the TV audio input
setting does not match the actual connection.
Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack.
For details, see the following:
– “Setting the audio jack used for TV audio input” (p.100)
l The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
n The sound is distorted
l If you are trying to use ARC, ARC is disabled on the unit or TV.
Set “ARC” in the “Setup” menu to “On”, and enable ARC on the TV. For details,
see the following:
– “Setting the use of ARC” (p.100)
l The volume of the unit is too high.
Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to
“Off”. For details, see the following:
– “Setting the use of the eco mode” (p.106)
l A device (such as an external power amplifier) connected to the unit’s audio
output jacks is not turned on.
Turn on all devices connected to the unit’s audio output jacks.
125
En
n No image (contents required the HDCP 2.2/2.3 -
Video trouble
compatible HDMI device) from the playback device
n No video
l Another input source is selected on the unit.
Select an appropriate input source with the input selection keys.
l The TV (HDMI input jack) does not support HDCP 2.2/2.3.
Connect the unit to the TV (HDMI input jack) that supports HDCP 2.2/2.3. (The
Warning message can be displayed on the TV screen.)
l Another input source is selected on the TV.
Switch the TV input to display the video from the unit.
n The menu of the unit is not displayed on the TV
l The video signal output from the unit is not supported by the TV.
Check the video output setting of the playback device. For information about video
signals supported by the TV, refer to the instruction manuals for the TV.
l The TV is not connected to the unit via HDMI.
You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them. For details, see
the following:
– “HDMI connection with a TV” (p.24)
l The cable connecting the unit and TV (or playback device) is defective.
If there is no problem with the connection, replace with another cable.
l Another input source is selected on the TV.
Switch the TV input to display the video from the unit (HDMI OUT jack).
n No video from the playback device connected to the
unit with HDMI
l The input video signal (resolution) is not supported by the unit.
To check the information about the current video signal (resolution) and video
signals supported by the unit, see the following:
– “Checking information about the video/audio signals” (p.83)
– “HDMI signal compatibility” (p.150)
l The TV does not support HDCP (High-bandwidth Digital Content Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
l The number of devices connected to the HDMI OUT jack is over the limit.
Disconnect some of the HDMI devices.
126
En
DAB radio trouble (RX-D485)
FM/AM radio trouble (AM radio feature is available
only on RX-V485)
n No DAB radio reception
n FM radio reception is weak or noisy
l An initial scan has not been performed.
Perform an initial scan to receive DAB radio. For details, see the following:
– “Preparing the DAB tuning” (p.56)
l There is multi-path interference.
Adjust the FM antenna height or orientation, or place it in a different location.
l Your area is too far from the FM station transmitter.
To select monaural FM radio reception, set “FM Mode” in the “Option” menu to
“Monaural”. Or use an outdoor FM antenna. For details on “FM Mode”, see the
following:
– “Switching between stereo and monaural for FM radio reception” (p.84)
n No DAB radio reception even after performing an initial
scan
n AM radio reception is weak or noisy
l The noises may be caused by fluorescent lamps, motors, thermostats, or other
electrical equipment.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
l Reception strength of DAB radio is poor.
Check reception strength in “Tune AID” in the “Option” menu, and adjust the
antenna height or orientation, or place it in a different location. For details, see the
following:
– “Checking reception strength of each DAB channel label” (p.60)
l There is no DAB coverage in your area.
Check with your dealer or WorldDMB online at “http://www.worlddab.org” for a
listing of the DAB coverage in your area.
n Radio stations cannot be selected automatically
l Your area is too far from the FM station transmitter.
Select the station manually. Or use an outdoor antenna. We recommend using a
sensitive multi-element antenna. For details on selecting the station manually, see
the following:
– “Selecting a frequency for reception” (p.51)
l The AM radio signal is weak.
Adjust the AM antenna orientation. Select the station manually. Use an outdoor AM
antenna. For details on selecting the station manually, see the following:
– “Selecting a frequency for reception” (p.51)
n AM radio stations cannot be registered as presets
l Auto Preset has been used.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually. For details, see the following:
– “Registering a radio station manually” (p.53)
127
En
n DAB radio reception is weak or noisy
USB trouble
l There is multi-path interference.
Check reception strength in “Tune AID” in the “Option” menu, and adjust the
antenna height or orientation, or place it in a different location. For details, see the
following:
– “Checking reception strength of each DAB channel label” (p.60)
l Your area is too far from the DAB station transmitter.
Use an outdoor antenna. We recommend using a sensitive multi-element antenna.
n The unit does not detect the USB device
l The USB device is not connected to the USB jack securely.
Turn off the unit, reconnect your USB device, and turn the unit on again.
l The file system of the USB device is not FAT16 or FAT32.
Use a USB device with FAT16 or FAT32 format.
n Folders and files in the USB device cannot be viewed
n DAB information is not available or is inaccurate
l The data in the USB device is protected by the encryption.
Use a USB device without an encryption function.
l The selected DAB radio station may be temporarily out of service or may not
provide information.
Contact the DAB broadcaster.
n The unit does not perform continuous playback on files
n No DAB radio sound
of USB device
l The selected DAB radio station may be temporarily out of service.
Try the station later or select another station.
l When the unit detects a series of unsupported files during playback, playback
stops automatically.
Do not save unsupported files (such as images and hidden files) in folders for
playback.
128
En
n The unit does not detect the media server (PC/NAS)
Network trouble
l The media sharing setting is not correct.
Configure the sharing setting and select the unit as a device to which music
contents are shared. For details, see the following:
– “Media sharing setup on media servers (PCs/NAS)” (p.69)
n The network feature does not function
l The network parameters (IP address) have not been obtained properly.
Enable the DHCP server function on your router and set “DHCP” in the “Setup”
menu to “On” on the unit. If you want to configure the network parameters
manually, check that you are using an IP address which is not used by other
network devices in your network. For details, see the following:
– “Setting the network parameters automatically (DHCP)” (p.110)
– “Setting the network parameters manually” (p.111)
l Some security software installed on your media server is blocking the access
of the unit to your media server.
Check the settings of security software installed on your media server.
l The unit and media server are not in the same network.
Check the network connections and your router settings, and then connect the unit
and the media server to the same network.
l The unit does not support IPv6 network.
Connect IPv4 network.
l The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your media server to allow it to access to the unit. For
details, see the following:
– “Setting the MAC address filter” (p.111)
n The unit cannot connect to the Internet via a wireless
router (access point)
l The wireless router (access point) is turned off.
Turn on the wireless router.
n The files in the media server (PC/NAS) cannot be
viewed or played back
l The unit and the wireless router (access point) are too far apart.
Place the unit and the wireless router (access point) closer to each other.
l The files are not supported by the unit or the media server.
Use the file format supported by both the unit and the media server. For
information about the file formats supported by the unit, see the following:
– “Supported file formats” (p.147)
l There is an obstacle between the unit and the wireless router (access point).
Move the unit and the wireless router (access point) in a location where there are
no obstacles between them.
l The wireless router (access point) is set to use the wireless channel 14.
Change settings of the wireless router (access point) to use one of the wireless
channels from 1 to 13.
n Wireless network is not found
l Microwave ovens or other wireless devices in your neighborhood might
disturb the wireless communication.
Turn off these devices.
l Access to the network is restricted by the firewall settings of the wireless
router (access point).
Check the firewall setting of the wireless router (access point).
129
En
n The Internet radio cannot be played
n The application for mobile devices does not detect the
unit
l The selected Internet radio station is currently not available.
There may be a network problem at the radio station, or the service may have
been stopped. Try the station later or select another station.
l The unit and mobile device are not in the same network.
Check the network connections and your router settings, and then connect the unit
and mobile device to the same network.
l The selected Internet radio station is currently broadcasting silence.
Some Internet radio stations broadcast silence at certain of times of the day. Try
the station later or select another station.
l Access to the network is restricted by the firewall settings of your network
devices (such as the router).
Check the firewall settings of your network devices. The Internet radio can be
played only when it passes through the port designated by each radio station. The
port number varies depending on the radio station.
n The iPhone does not recognize the unit when using
AirPlay
l The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your mobile device to allow it to access to the unit. For
details, see the following:
– “Setting the MAC address filter” (p.111)
l The unit is connected to a multiple SSID router.
Access to the unit might be restricted by the network separation function on the
router. Connect the iPhone to the SSID which can access the unit. (Connect it to
the Primary SSID at the top of the list.)
n Firmware update via the network is failed
l The unit is connected to a multiple SSID router.
Access to the unit might be restricted by the network separation function on the
router. Connect the iPhone to the SSID which can access the unit. (Connect it to
the Primary SSID at the top of the list.)
l It may not be possible depending on the condition of the network.
Update the firmware via the network again or use a USB memory device. For
details, see the following:
– “Updating the firmware via the network” (p.113)
130
En
n No sound is produced, or the sound is interrupted
Bluetooth® trouble
during playback with Bluetooth® connection
n A Bluetooth® connection cannot be established
l The volume of the Bluetooth device is set too low.
Turn up the volume of the Bluetooth device.
l The Bluetooth function of the unit is disabled.
Enable the Bluetooth function. For details, see the following:
– “Setting the use of Bluetooth®” (p.114)
l The Bluetooth device is not set to send audio signals to the unit.
Switch the audio output of the Bluetooth device to the unit.
l Another Bluetooth device is already connected to the unit.
Terminate the current Bluetooth connection and then establish a new connection.
For details, see the following:
– “Playback Bluetooth® device music on the unit” (p.65)
l The Bluetooth connection has been terminated.
Establish a Bluetooth connection between the Bluetooth device and the unit again.
For details, see the following:
– “Playback Bluetooth® device music on the unit” (p.65)
l The unit and the Bluetooth device are too far apart.
Move the Bluetooth device closer to the unit.
l The unit and the Bluetooth device are too far apart.
Move the Bluetooth device closer to the unit.
l There is a device (such as microwave oven and wireless LAN) that outputs
signals in the 2.4 GHz frequency band nearby.
Move the unit and the Bluetooth device away from those devices.
l There is a device (such as microwave oven and wireless LAN) that outputs
signals in the 2.4 GHz frequency band nearby.
Move the unit and the Bluetooth device away from those devices.
l The Bluetooth device does not support A2DP.
Use a Bluetooth device that supports A2DP.
l The connection information registered on the Bluetooth device is not working
for some reason.
Delete the connection information on the Bluetooth device, and then establish a
connection between the Bluetooth device and the unit again. For details, see the
following:
– “Playback Bluetooth® device music on the unit” (p.65)
131
En
Error indications on the front display
Error indications on the front display
Refer to the following table when the error message is indicated on the front display.
Message
Cause
Remedy
Access denied
Access to the media servers (PCs/NAS) is denied.
Configure the sharing settings and select the unit as a device to which music contents are shared. For
details, see the following:
The unit cannot access the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
• “Media sharing setup on media servers (PCs/NAS)” (p.69)
Access error
There is a problem with the signal path from the network to the unit.
Make sure your router and modem are turned on, and check the connection between the unit and your
router (or hub). For details, see the following:
• “Connecting a network cable (wired connection)” (p.29)
• “Preparing wireless antennas (wireless connection)” (p.30)
Check SP Wires
The speaker cables are short circuited.
Twist the bare wires of the cables firmly and connect to the unit and speakers properly. For details, see
the following:
Internal Error
An internal error has occurred.
Contact the nearest authorized Yamaha dealer or service center.
No content
There are no playable files in the selected folder.
Select a folder that contains files supported by the unit.
No device
The unit cannot detect the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The network cable is not connected.
Connect the network cable properly.
The wireless router (access point) is not found.
Make sure the wireless router (access point) is turned on.
Please wait
The unit is preparing for connecting to the network.
Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn
it on again.
RemID Mismatch
The remote control IDs of the unit and the remote control are not
identical.
• “Connecting the speaker” (p.18)
Not connected
Change the remote control ID of the unit or the remote control. For details, see the following:
• “Selecting the remote control ID (REMOTE ID)” (p.118)
The unit cannot play back the songs stored on the iPhone for some Check the song data. If it cannot be played on the iPhone itself, the song data or storage area may be
reason.
defective.
The unit cannot play back the songs stored on the media servers
(PCs/NAS) for some reason.
Ensure that the files are types that the unit is able to play back. If the unit supports the file format, but
still cannot play back any files, the network may be overloaded with heavy traffic. For information about
the formats supported by the unit, see the following:
USB Overloaded
An overcurrent is flowing through the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
Version error
Firmware update failed.
Unable to play
• “Supported file formats” (p.147)
Update the firmware again. For details, see the following:
• “Updating the firmware (UPDATE)” (p.120)
• “Updating the unit’s firmware via the network” (p.135)
132
En
Message
Cause
Update failed.
Firmware update failed.
FILE NOT READY
Preparation for firmware update is not finish yet.
Remedy
Press STRAIGHT and select a firmware updating method, then press INFO to update the firmware
again. For details, see the following:
• “Updating the firmware (UPDATE)” (p.120)
• “Updating the unit’s firmware via the network” (p.135)
Wait a while before updating the firmware again.
133
En
APPENDIX
Updating the unit’s firmware via the network
Firmware updates
NOTICE
New firmware that provides additional features or product improvements will be
released as needed. If the unit is connected to the Internet, new firmware is
downloaded via the network. When a firmware update is ready, the following message
appears after SETUP is pressed.
▪ Do not operate the unit or disconnect the power cable or network cable during firmware update. If the
firmware update is interrupted, there is a possibility that the unit will malfunction. In this case, contact
your nearest authorized Yamaha dealer or service center to request repair.
NOTE
▪ The firmware update indicator on the front display lights up when a firmware update is ready. This
indicator might not light up when the network connection speed is too slow or a later firmware update is
available.
▪ Firmware update takes about 20 minutes or more.
▪ You might not get the message or the lighting up firmware update indicator on the front display depending
on the condition of the network connection. In this case, update the firmware using the USB memory
device. For details, see the following:
– “Updating the firmware (UPDATE)” (p.120)
▪ For details on firmware updates, visit the Yamaha website.
You can switch the language.
For details on the firmware update, see the following:
• “Updating the unit’s firmware via the network” (p.135)
134
En
Updating the unit’s firmware via the network
Confirm the on-screen description displayed after SETUP is pressed, and start the
firmware update.
1
Read the on-screen description and press the down cursor key.
The next screen appears.
2
To start the firmware update, press ENTER.
The on-screen display turns off.
3
If “UPDATE SUCCESS PLEASE POWER OFF!” appears on the
front display, press z (power) on the front panel.
The firmware update is complete.
NOTE
▪ Firmware update takes about 20 minutes or more.
▪ You might not get the message or the lighting up firmware update indicator on the front display depending
on the condition of the network connection. In this case, update the firmware using the USB memory
device. For details on using the USB memory device, see the following:
– “Updating the firmware (UPDATE)” (p.120)
▪ For details on update, visit the Yamaha website.
▪ If you want to perform update when turning off the unit, press not ENTER but the down cursor key in step
2, and follow the on screen instructions. When you turn off the unit, a screen asking you to confirm the
firmware update is displayed, and press ENTER to start the firmware update. After the firmware update is
complete, the unit will turn off automatically.
▪ To perform update when turning off the unit, refer to the following instructions and supplementary
explanations.
– The firmware update can be started by pressing INFO on the front panel.
– The unit turns off automatically without performing the firmware update if two minutes pass after the
screen to confirm the firmware update is displayed.
– To cancel the firmware update process, press RETURN, and the unit will turn off.
– The unit turns off without performing the firmware update if you turn off the unit with AV CONTROLLER
or MusicCast CONTROLLER.
135
En
Using wireless surround speakers (MusicCast Surround function)
n Sample speaker layout
Using wireless surround speakers (MusicCast
Surround function)
The following is a 5.1-channel system using two MusicCast 20 speakers as the
surround speakers and one MusicCast SUB 100 as the subwoofer.
Using devices that support the MusicCast Surround function, you can enjoy a 5.1channel system with wireless surround speakers and subwoofer.
NOTE
▪ For details on the 5.1-channel system, see the following:
1
2
– “Using 5.1-channel system” (p.20)
▪ Refer to the instruction manual of the devices that support the MusicCast Surround function for details on
settings and operations.
9
n Devices supporting MusicCast Surround
3
4
5
As of December 1, 2018
Wireless Streaming Speaker
Network Subwoofer
NOTE
▪ In a 5.1-channel system, the surround speakers and subwoofer can be wireless. With other systems, only
the subwoofer can be wireless.
▪ With wireless surround speakers
MusicCast 50
MusicCast 20
– Sound will not be output from the speaker terminals (SURROUND) on the unit.
MusicCast SUB 100
▪ With a wireless subwoofer
– One subwoofer can be wireless.
– Sound will not be output from the pre-out jack (SUBWOOFER) on the unit. Therefore, another
subwoofer cannot be used by connecting it with an audio cable.
▪ The following audio cannot be output from the wireless surround speakers and subwoofer.
– DSD audio
– DVD-Audio and Super Audio CD (SACD) from HDMI input
136
En
1
2
The unit and the devices supporting MusicCast Surround must be
registered with the same location on the MusicCast
CONTROLLER app.
Follow the app’s on-screen instructions to complete setup of the
MusicCast Surround function.
Tap the
settings icon.
Tap “MusicCast
Surround/Stereo”.
For detailed setup instructions, refer to the following.
https://download.yamaha.com/files/tcm:39-1212383
3
Adjust the speaker settings automatically (YPAO).
NOTE
For details on YPAO, see the following:
▪ “Optimizing the speaker settings automatically (YPAO)” (p.33)
4
Check the settings.
And then, you can enjoy content playback with the MusicCast
CONTROLLER app.
137
En
Connecting to a network wirelessly
Selecting a wireless network connection method
1
2
Select a wireless connection method according to your network environment.
NOTE
▪ You need to configure the network settings if your router does not support DHCP or if you want to
configure the network parameters manually. For details, see the following:
3
4
5
– “Setting the network parameters manually” (p.111)
▪ When the unit is added to a MusicCast network, the network settings can be configured at the same time.
If you use MusicCast, this method is recommended. For details, see the following:
– “Adding the unit to the MusicCast network” (p.37)
Internet
Wireless router
6
Press z (receiver power) to turn on the unit.
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
Press SETUP.
Use the cursor keys to select “Network” and press ENTER.
Use the cursor keys to select “Network Connection” and press
ENTER.
Use the cursor keys to select “Wireless(Wi-Fi)” and press ENTER.
The following connection methods are available.
• “Setting up a wireless connection using the WPS button” (p.139)
Modem
• “Setting up a wireless connection using an iOS device” (p.139)
• “Setting up a wireless connection by selecting from the list of available access
points” (p.140)
Mobile device
(such as iPhone)
• “Setting up a wireless connection manually” (p.141)
• “Setting up a wireless connection by using the WPS PIN code” (p.142)
The unit
138
En
Setting up a wireless connection using the WPS
button
Setting up a wireless connection using an iOS device
You can set up a wireless connection by applying the connection settings on iOS
devices (iPhone/iPad/iPod touch).
You can easily set up a wireless connection with one push of the WPS button.
Before proceeding, confirm that your iOS device is connected to a wireless router.
Setup menu
NOTE
“Network” > “Network Connection” > “Wireless(Wi-Fi)”
1
2
▪ This process will restore the default settings for the following.
– Network settings
Use the cursor keys to select “WPS Button” and press ENTER.
– Bluetooth settings
– Bluetooth, USB, media server and network content registered as shortcuts
Read the on-screen description and push the WPS button on the
wireless router (access point).
– Internet radio stations registered to “Favorites”
When the connection process finishes, “Completed” appears on the front
display.
If “Not connected” appears, repeat from step 1 or try another connection
method.
– Account information for the network services
▪ You need iOS device with iOS 7 or later. (The following procedure is a setup example for iOS 10.)
▪ This configuration does not work if the security method of your wireless router (access point) is WEP. In
this case, use other connection method.
Setup menu
“Network” > “Network Connection” > “Wireless(Wi-Fi)”
This completes the network settings.
1
2
NOTE
▪ The unit may not connect to the wireless router (access point) using WEP as the encryption method. In
this case, try another connection method.
▪ You can use INFO (WPS) on the front panel. Hold down INFO (WPS) for a few seconds to set up a
wireless connection and then “Press WPS button on Access Point” appears on the front display, push the
WPS button.
Use the cursor keys to select “WAC(iOS)” and press ENTER.
Read the on-screen description and press ENTER.
NOTE
When you use wired network connection, a warning message is displayed on the screen.
Disconnect the network cable from the unit, and then press ENTER.
About WPS
▪ WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy
establishment of a wireless home network.
3
On the iOS device, select the unit as the AirPlay speaker in the WiFi screen.
iOS 10 (example of English version)
The name of the unit
139
En
4
Setting up a wireless connection by selecting from
the list of available access points
Select the network (access point) of which you want to share the
settings with the unit.
Tap here to start setup
You can set up a wireless connection by selecting an access point from the list of
wireless LAN routers (access points) found by the unit. You need to manually enter the
security key.
Setup menu
The network currently selected
“Network” > “Network Connection” > “Wireless(Wi-Fi)”
1
When the sharing process finishes, the unit is automatically connected to
the selected network (access point) and “Completed” appears on the
front display.
Use the cursor keys to select “Access Point Scan” and press
ENTER.
If “Not shared” or “Not connected” appears, press ENTER to repeat from
step 1 or try another connection method.
5
Press SETUP.
This completes the network settings.
After searching for access points, the list of available access points
appears on the TV.
2
Use the cursor keys to select the desired access point and press
ENTER.
The wireless connection setting screen appears on the TV.
Access Point X
3
Press ENTER.
The edit screen appears.
140
En
4
Setting up a wireless connection manually
Use the cursor keys and ENTER to enter the security key.
You can set up a wireless connection by entering the required information manually.
You need to set up the SSID (network name), encryption method and security key for
your network.
Setup menu
“Network” > “Network Connection” > “Wireless(Wi-Fi)”
1
Use the cursor keys to select “Manual Setting” and press ENTER.
The manual setting screen appears.
5
When finished entering the key, use the cursor keys to select
“OK” and press ENTER.
The previous wireless connection setting screen appears on the TV.
6
Use the cursor keys to select “Connect” and press ENTER to start
the connection process.
When the connection process finishes, “Completed” appears on the TV
screen.
2
If “Not connected” appears, repeat from step 2 or try another connection
method.
7
Use the cursor keys to select “SSID” and press ENTER.
The edit screen appears.
3
Press SETUP.
This completes the network settings.
141
En
Use the cursor keys and ENTER to enter the SSID of the access
point.
4
Setting up a wireless connection by using the WPS
PIN code
When finished entering the key, use the cursor keys to select
“OK” and press ENTER.
The previous manual setting screen appears on the TV.
5
Use the cursor keys to select “Security” and select the encryption
method.
Choices
You can set up a wireless connection by entering the unit’s PIN code into the wireless
router (access point). The method is available if the wireless router (access point)
supports the WPS PIN code method.
Setup menu
“Network” > “Network Connection” > “Wireless(Wi-Fi)”
None, WEP, WPA-PSK(AES), Mixed Mode
1
NOTE
If you select “None”, the connection may be insecure since the communication is not encrypted.
6
The list of available access points appears on the TV.
2
Use the cursor keys to select “Security Key” and press ENTER.
The edit screen appears.
3
If you select “None” in step 5, this item is not available.
9
Enter the unit’s PIN code into the wireless router (access point).
For details on settings, refer to the instruction manual of the wireless
router (access point).
Use the cursor keys and ENTER to enter the security key.
When finished entering the key, use the cursor keys to select
“OK” and press ENTER.
4
Press ENTER to start the connection process.
The previous manual setting screen appears on the TV.
When the connection process finishes, “Completed” appears on the TV
screen.
Use the cursor keys to select “Connect” and press ENTER to start
the connection process.
If “Not connected” appears, repeat from step 2 or try another connection
method.
When the connection process finishes, “Completed” appears on the TV
screen.
5
Press SETUP.
This completes the network settings.
If “Not connected” appears, check that all the information is entered
correctly, and repeat from step 2.
10
Use the cursor keys to select the desired access point and press
ENTER.
The PIN code of the unit appears on the TV screen.
NOTE
7
8
Use the cursor keys to select “PIN Code” and press ENTER.
Press SETUP.
This completes the network settings.
142
En
Input/output jacks and cables
(Stereo mini jack)
Video/audio jacks
Audio jacks
n HDMI jacks
n OPTICAL jack
Transmit digital video and digital sound through a
single jack. Use an HDMI cable.
Transmit digital audio signals. Use a digital optical
cable. If there is a protective cap on the tip of the
cable, remove it before using the cable.
Use a stereo mini-plug cable.
Stereo mini-plug cable
HDMI cable
Digital optical cable
OPTICAL
NOTE
▪ Use a 19-pin HDMI cable with the HDMI logo. We recommend
using a cable as short as possible to prevent signal quality
degradation.
▪ The unit’s HDMI jacks support the HDMI Control, Audio Return
Channel (ARC), and 3D and 4K Ultra HD video transmission
(through output) features.
▪ Use a Premium High Speed HDMI Cable or Premium High Speed
Cable with Ethernet to enjoy 3D or 4K Ultra HD videos.
Video jacks
n VIDEO jacks
Transmit analog video signals. Use a video pin cable.
Video pin cable
n COAXIAL jacks
Transmit digital audio signals. Use a digital coaxial
cable.
Digital coaxial cable
n AUDIO jacks
Transmit analog stereo audio signals.
(Stereo L/R jacks)
Use a stereo pin cable (RCA cable).
Stereo pin cable
143
En
Glossary
Glossary of audio information
DTS-HD Master Audio
DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition
home theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio
can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio)
simultaneously. This technology is used for audio on BD (Blu-ray Disc).
n Glossary of audio decoding format
This is a glossary of the technical terms related to audio decoding format used in this
manual.
DTS Neo: 6
DTS Neo: 6 enables 6-channel playback from 2-channel sources. There are two modes available:
“Music mode” for music sources and “Cinema mode” for movie sources. This technology provides
discrete full-bandwidth matrix channels of surround sound.
Dolby Digital
Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that
supports 5.1-channel audio. This technology is used for audio on most DVD disc.
DSD (Direct Stream Digital)
Dolby Digital Plus
Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that
supports 7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing
multichannel audio systems that support Dolby Digital. This technology is used for audio
streaming services on the Internet and audio on BD (Blu-ray Disc).
DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as
SACD (Super Audio CDs). The signals are stored at a high-frequency sampling rate (such as 11.2
MHz). The highest frequency response is equal to or higher than 100 kHz, with a dynamic range
of 120 dB. This technology offers better audio quality than that used for CDs.
FLAC
FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed
audio formats in compression rate but provides higher audio quality.
Dolby Pro Logic II
Dolby Pro Logic II enables 5-channel playback from 2-channel sources. There are three modes
available: “Music mode” for music sources, “Movie mode” for movie sources, and “Game mode”
for game sources.
MP3
Dolby TrueHD
Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to
offer a high-definition home theater experience with the quality of the studio master. Dolby TrueHD
can carry up to eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio)
simultaneously. This technology is used for audio on BD (Blu-ray Disc).
DTS 96/24
One of the compressed digital audio format used by MPEG. With psychoacoustic technologies,
this compression method achieves a high compression rate. Reportedly, it is capable of
compressing data quantity by about 1/10 maintaining a certain level of audio quality.
MPEG-4 AAC
An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio
streaming services on Internet because it allows a high compression rate of data while
maintaining better audio quality than MP3.
PCM (Pulse Code Modulation)
DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit
audio. This format remains fully compatible with the existing multichannel audio systems that
support DTS Digital Surround. This technology is used for music DVDs, etc.
PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted.
This technology is the basis of all other audio format. This technology is used as a lossless audio
format called Linear PCM for audio on a variety of media, including CDs.
DTS Digital Surround
Sampling frequency/Quantization bit
DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
DTS Express
Sampling frequency and quantization bits indicate the quantity of information when an analog
audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”.
DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a
higher compression rate than the DTS Digital Surround format developed by DTS, Inc. This
technology is developed for audio streaming services on the Internet and secondary audio on BD
(Blu-ray Disc).
• Sampling frequency
Sampling frequency (the number of times the signal is sampled per second) is called the
sampling rate. When the sampling frequency is higher, the range of frequencies that can be
played back are wider.
DTS-HD High Resolution Audio
• Quantization bit
The number of quantization bits indicate the degree of accuracy when converting the sound
level into a numeric value. When the number of quantized bits is higher, the expression of the
sound level is more accurate.
DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that
supports 7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully
compatible with the existing multichannel audio systems that support DTS Digital Surround. This
technology is used for audio on most BD (Blu-ray Disc).
144
En
WAV
HDMI
Windows standard audio file format, which defines the method of recording the digital data
obtained by converting audio signals. By default, the PCM method (no compression) is used, but
you can also use other compression methods.
HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/
video signal transmission. This interface transmits both digital audio and digital video signals
using a single cable without any loss. HDMI complies with HDCP (High-bandwidth Digital Content
Protection) and provides a secure audio/video interface. For further information on HDMI, visit the
HDMI website at “http://www.hdmi.org/”.
WMA (Windows Media Audio)
One of the compressed digital audio formats developed by Microsoft Corporation. With
psychoacoustic technologies, this compression method achieves a high compression rate.
Reportedly, it is capable of compressing data quantity by about 1/20 maintaining a certain level of
audio quality.
n Glossary of audio information other than audio
decoding format
x.v.Color
“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color
space than sRGB and allows the expression of colors that were not hitherto possible. While
remaining compatible with the color gamut of sRGB standards, “x.v.Color” expands the color
space, and thus can produce more vivid, natural images.
Glossary of network information
This is a glossary of the technical terms related to audio information used in this
manual.
This is a glossary of the technical terms related to network information used in this
manual.
Bi-amplification connection (Bi-amp)
A bi-amplification connection uses two amplifiers for a speaker. When you use the bi-amplification
connection, the unit drives the tweeter and woofer in a speaker with the discrete amplifiers. As a
consequence, the tweeter and woofer provide clear audio signal without the interference.
LFE (Low Frequency Effects) 0.1 channel
This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to
120 Hz. This channel is added to the channels for all bands with Dolby Digital or DTS to enhance
low frequency audio effects. This channel is labeled 0.1 because it is limited to only low frequency
audio.
Lip sync
SSID
SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.
Wi-Fi
Wi-Fi (Wireless Fidelity) is a technology that allows an electronic device to exchange data or
connect to the Internet wirelessly using radio waves. Wi-Fi offers the advantage of eliminating the
complexity of making connections with LAN cables by using wireless connection. Only products
that complete Wi-Fi Alliance interoperability tests can carry the “Wi-Fi Certified” trademark.
WPS
WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy
establishment of a wireless home network.
Video output sometimes lags behind audio output due to the complexity of signal processing
caused by an increase in video signal capacity. Lip sync is a technique for automatically
correcting the timing lag between audio and video output.
Glossary of Yamaha technologies
Glossary of HDMI and video information
This is a glossary of the technical terms related to HDMI and video information used in
this manual.
Composite video signal
With the composite video signal system, color, brightness, and synchronization data signals are
combined and transmitted with a single cable.
Deep Color
Deep Color is a technology that HDMI specification supports. Deep Color increases the number of
available colors within the boundaries defined by the RGB or YCbCr color space. Conventional
color systems process the color using 8 bits. Deep Color processes the color with 10, 12, or 16
bits. This technology allows HDTVs and other displays to increase from millions of colors to
billions of colors and eliminate on-screen color banding for smooth tonal transitions and subtle
gradations between colors.
145
This is a glossary of the technical terms related to Yamaha technologies used in this
manual.
CINEMA DSP (Digital Sound Field Processor)
Since the surround sound systems were originally designed for use in movie theaters, their effect
is best experienced in a theater that has many speakers designed for acoustic effects. Since
home conditions (such as room size, wall material, and number of speakers) can differ so widely,
it is inevitable that there are differences in the sound that you hear. Based on a wealth of actually
measured data, CINEMA DSP, Yamaha’s original DSP technology provides the audiovisual
experience of a movie theater in your own home.
CINEMA DSP 3D
The actually measured sound field data contain the information of the height of the sound images.
CINEMA DSP 3D mode achieves the reproduction of the accurate height of the sound images so
that it creates the accurate and intensive 3D sound fields in a listening room.
En
Compressed Music Enhancer
The Compressed Music Enhancer feature compensates for missing harmonics in compression
music formats (such as MP3). As a result, this technology provides improved performance for the
overall sound system.
SILENT CINEMA
Supported devices and file formats
Supported Bluetooth® devices
Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones.
Parameters for headphones have been set for each sound program, so that accurate
representations of all the sound programs can be enjoyed on headphones.
The following Bluetooth devices can be used by the unit.
Virtual CINEMA DSP
• Operation of all Bluetooth devices cannot be guaranteed.
Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround
speakers with front left and right speakers. Even if the surround speakers are not connected, the
unit creates the realistic sound field in a listening room.
Supported USB devices
• Bluetooth devices that support A2DP can be used.
Virtual Presence Speaker (VPS)
Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field
without presence speakers. Even if the presence speakers are not connected, the unit creates the
3D sound field in your room.
The following USB devices can be used by the unit.
• This unit is compatible with USB memory devices that are in FAT16 or FAT32 format.
Do not connect any other type of USB devices.
YPAO (Yamaha Parametric room Acoustic Optimizer)
• USB devices with encryption cannot be used.
The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections,
measures the distances from them to your listening position(s), and then automatically optimizes
the speaker settings, such as volume balance and acoustic parameters, to suit your room.
• Operation of all USB devices cannot be guaranteed.
Supported AirPlay devices
This AV Receiver is compatible with AirPlay 2. iOS 11.4 or later is required.
146
En
Supported file formats
Video signal flow
The following file formats can be used by the unit.
File
Sampling
frequency
(kHz)
WAV *
32/44.1/48/
88.2/96/
176.4/192
Quantization
bit (bit)
16/24/32
Bitrate (kbps)
-
Number of
channels
2
Video signal flow
Support for
gapless
playback
Video signals input from a video device to the unit are output to a TV as follows.
Video device
The unit
TV
4
MP3
32/44.1/48
-
8 to 320
2
-
WMA
32/44.1/48
-
8 to 320
2
-
MPEG-4 AAC
32/44.1/48
-
8 to 320
2
-
FLAC
32/44.1/48/
88.2/96/
176.4/192
16/24
-
2
4
ALAC
32/44.1/48/
88.2/96
16/24
-
2
4
AIFF
32/44.1/48/
88.2/96/
176.4/192
16/24/32
-
2
4
DSD
2.8 MHz/
5.6 MHz/
11.2 MHz
1
-
2
-
HDMI connection
HDMI in
HDMI
HDMI out
HDMI
HDMI
HDMI
Composite video connection
* Linear PCM format only. 32 bit-float files cannot be played back.
VIDEO in
• The playable file formats differ depending on the software installed on media
servers (PCs/NAS). Refer to the instruction manual of the server software for details.
VIDEO
• Digital Rights Management (DRM) contents cannot be played back.
147
En
VIDEO
VIDEO out
MONITOR OUT
VIDEO
Additional information on HDMI
(Example)
HDMI Control and synchronized operations
HDMI Control allows you to operate external devices via HDMI. If you connect a TV
that supports HDMI Control to the unit with an HDMI cable, you can control the unit
(such as power and volume) with TV remote control operations. You can also control
external devices (such as HDMI Control-compatible BD/DVD players) connected to
the unit with an HDMI cable.
HDMI Control
HDMI Control
Playback starts
Turns on and displays video
from the playback device
Press SCENE (BD/DVD)
Operations available from the TV’s remote control
NOTE
• Standby
▪ HDMI Control might not work properly.
• Volume control including mute
▪ For details on the scene selection, see the following:
• Switching to input audio from the TV when the TV input is switched to its built-in
tuner
– “Selecting a registered scene” (p.73)
▪ For details on TV audio input, see the following:
• Switching to input video/audio from the selected playback device
– “Setting the audio jack used for TV audio input” (p.100)
• Switching between audio output devices (the unit or TV speaker)
▪ For details on the functions for the RED/GREEN/YELLOW/BLUE keys, see the following:
– “Setting the unit's functions for the RED/GREEN/YELLOW/BLUE keys of the remote control” (p.109)
(Example)
HDMI Control
To use HDMI Control, you need to perform the following HDMI Control link setup after
connecting the TV and playback devices.
HDMI Control
For details on settings and operating your TV, refer to the instruction manual for the TV.
Playback device
also turns off
The unit turns off
(standby)
NOTE
This setup is required every time you add a new HDMI Control-compatible device to your system.
Turn off the TV
1
2
Operations available from the unit’s remote control
• Starting playback on the playback device and turning on the TV with a scene
selection
• Switching the TV input to display the “Setup” menu (when SETUP is pressed)
Turn on the unit, TV, and playback devices.
Enable the HDMI Control function on the unit, TV and HDMI
Control-compatible playback devices (such as BD/DVD players).
In order to enable the HDMI Control function on the unit, set “HDMI
Control” in the “Setup” menu to “On”, and then configure the settings in
related items (“TV Audio Input”, “Standby Sync”, “ARC” and “SCENE”).
For details, see the following:
▪ “Setting the use of HDMI Control” (p.99)
• Controlling the external device from which video is displayed on the TV (playback
and menu operations)
• Controlling the TV when you select TV audio input that is set in “TV Audio Input” in
the “Setup” menu
• Controlling the TV with the color (RED/GREEN/YELLOW/BLUE) keys of the remote
control when “TV Control” is set for the color keys
3
148
En
Turn off the main power of the TV and then turn off the unit and
playback devices.
4
5
6
Turn on the unit and playback devices and then turn on the TV.
Audio Return Channel (ARC)
Switch the TV input to display the video from the unit.
ARC allows you to input TV audio to the unit with the HDMI cable which transmits video
signal to the TV.
Check the following after the HDMI Control settings.
Check that the input, to which the playback device is connected
on the unit, is selected.
NOTE
For details on the HDMI Control settings, see the following:
If not, select the input source manually.
7
8
▪ “HDMI Control and synchronized operations” (p.148)
1
2
Check that the video from the playback device is displayed on the
TV.
Check that the unit is properly synchronized with the TV by
turning off the TV or adjusting the TV volume with the TV remote
control.
Select a TV program with the TV remote control.
Check that the input source of the unit will be automatically
switched to “AUDIO1” and the TV audio will be played back on the
unit.
If you cannot hear the TV audio, check the following:
NOTE
▪ If HDMI Control does not work properly, the problem may be solved by turning the playback device off and
on again, or by unplugging the power plug and plugging it in again. Also, HDMI Control may not work
properly if the number of connected devices exceeds the limit. In this case, disable HDMI Control on
devices not in use.
• “ARC” in the “Setup” menu is set to “On”. For details, see the following:
– “Setting the use of ARC” (p.100)
• The HDMI cable is connected to the ARC-compatible HDMI jack (HDMI jack marked
“ARC”) on the TV.
▪ If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting
on the TV.
Some HDMI jack on the TV is not compatible with ARC. For details, refer to the
instruction manual for the TV.
▪ We recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
NOTE
▪ If the audio is interrupted while using ARC, set “ARC” in the “Setup” menu to “Off” and use a digital optical
cable to input TV audio to the unit. For details, see the following:
– “Setting the use of ARC” (p.100)
– “OPTICAL jack” (p.143)
▪ When using ARC, connect a TV with an HDMI cable that supports ARC.
▪ “AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO
1 jacks, use “TV Audio Input” in the “Setup” menu to change the TV audio input assignment. To use the
SCENE function, you also need to change the input assignment for SCENE (TV). For details, see the
following:
– “Setting the audio jack used for TV audio input” (p.100)
– “Registering a scene” (p.74)
149
En
HDMI signal compatibility
Confirm the following HDMI signal used by the unit.
• When CPPM copy-protected DVD-Audio is played back, video/audio signals may
not be output, depending on the type of the DVD player.
• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For
details, refer to the instruction manual for each device.
• To decode audio bitstream signals on the unit, set the playback device
appropriately so that the device outputs the bitstream audio signals directly (does
not decode the bitstream signals on the playback device). For details, refer to the
instruction manual for the playback device.
• If the playback device can decode the bitstream audio signals of audio
commentaries, you can play back the audio sources with the audio commentaries
mixed down by using digital audio input (OPTICAL or COAXIAL jacks). For details,
refer to the instruction manual for the playback device. The unit is not compatible
with audio commentaries for BD, such as audio content downloaded from the
internet.
150
En
Trademarks
Trademarks
The trademarks used in this manual are as follows.
Windows™
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
Internet Explorer, Windows Media Audio and Windows Media
Player are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Audio, Pro Logic, Dolby Vision, and the double-D symbol are
trademarks of Dolby Laboratories.
Yamaha Eco-Label is a mark that certifies products of high
environmental performance.
Google Noto Fonts
Android™
This product uses the following fonts.
Google Play™
Android and Google Play are trademarks of Google Inc.
Copyright © June 2015, Google
(https://www.google.com/get/noto/#sans-lgc), with Reserved Font
Name Noto Sans Version 1.004.
Copyright © June 2015, Google
(https://www.google.com/get/noto/help/cjk/), with Reserved Font
Name Noto Sans CJK Version 1.004.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, &
DTS and the Symbol together are registered trademarks of DTS,
Inc. © DTS, Inc. All Rights Reserved.
This AV Receiver is compatible with AirPlay 2. iOS 11.4 or later is
required.
Use of the Works with Apple badge means that an accessory has
been designed to work specifically with the technology identified in
the badge and has been certified by the developer to meet Apple
performance standards.
Apple, AirPlay, Apple TV, Apple Watch, iPad, iPad Air, iPad Pro,
iPhone, Lightning, and iTunes are trademarks of Apple Inc.,
registered in the U.S. and other countries.
The Wi-Fi CERTIFIED™ Logo and Wi-Fi Protected Setup are
certification marks of Wi-Fi Alliance®.
Wi-Fi, Wi-Fi CERTIFIED, Wi-Fi Protected Setup and WPA2 are
registered trademarks or trademarks of Wi-Fi Alliance®.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Yamaha Corporation is under license.
This license is available with a FAQ at: http://scripts.sil.org/OFL
Explanations regarding GPL
This product utilizes GPL/LGPL open-source software in some
sections. You have the right to obtain, duplicate, modify, and
redistribute this open-source code only. For information on GPL/
LGPL open source software, how to obtain it, and the GPL/LGPL
license, refer to the Yamaha Corporation website
(http://download.yamaha.com/sourcecodes/musiccast/).
Licenses
For information on the licenses of the third-party software in this
product, refer to the following.
(For RX-D485)
http://(IP address of this product*)/licenses.html
The unit supports DAB/DAB+ tuning.
* IP address of this product is checked with MusicCast
CONTROLLER.
App StoreSM
App Store is a service mark of Apple Inc.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
The terms HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
This Font Software is licensed under the SIL Open Font License,
Version1.1.
MusicCast is a trademark or registered trademark of Yamaha
Corporation.
x.v.Color™
“x.v.Color” is a trademark of Sony Corporation.
151
En
Specifications
HDMI
Specifications
HDMI Features:
• 4K UltraHD Video (include 4K/60, 50Hz 10/12bit), 3D Video, ARC (Audio Return Channel), HDMI
Control (CEC), Auto Lip Sync, Deep Color, “x.v.Color”, HD audio playback, Selectable HDMI
input in HDMI standby mode, 21:9 Aspect Ratio, BT.2020 Colorimetry, HDR Compatible
(HDR10, Dolby Vision, HLG)
The specifications of this unit are as follows.
Input jacks
Analog Audio
• Audio x 4 (including AUX)
Video Format (Repeater Mode)
• VGA
• 480i/60 Hz
• 576i/50 Hz
• 480p/60 Hz
• 576p/50 Hz
• 720p/60 Hz, 50 Hz
• 1080i/60 Hz, 50 Hz
• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
• 4K/60Hz, 50Hz, 30 Hz, 25 Hz, 24 Hz
Digital Audio (Supported frequencies: 32 kHz to 96 kHz)
• Optical x 1
• Coaxial x 2
Video
• Composite x 3
HDMI Input
• HDMI x 4
Audio Format
• Dolby TrueHD
• Dolby Digital Plus
• Dolby Digital
• DTS-HD Master Audio
• DTS-HD High Resolution Audio
• DTS Express
• DTS
• DSD 2-ch to 6-ch (2.8 MHz)
• PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
Other jacks
• USB x 1 (USB2.0)
• NETWORK (Wired) x 1 (100Base-TX/10Base-T)
Output jacks
Analog Audio
• Speaker Out x 5 (FRONT L/R, CENTER, SURROUND L/R*)
* Note: assignment is possible [SURROUND, BI-AMP (FRONT L/R), ZONE B]
• Subwoofer Out x 1
• Headphone x 1
Content Protection: HDCP 2.2/2.3 compatible
Video
• Composite x 1
Link Function: CEC supported
HDMI Output
• HDMI OUT x 1
Other jacks
YPAO MIC x 1
152
En
TUNER
Network
Analog Tuner
• [RX-V485 U.K., Europe, Russia and Middle East models]
FM/AM with Radio Data System x 1 (TUNER)
• [RX-V485 Other models]
FM/AM x 1 (TUNER)
• [RX-D485 U.K. and Europe models]
DAB/FM with Radio Data System x 1 (TUNER)
• [RX-D485 Australia model]
DAB/FM x 1 (TUNER)
PC Client Function
AirPlay supported
Internet Radio
Wi-Fi function
• Capable of WPS by PIN Method and Push-Button-Method
• Capable of sharing with iOS devices by wireless connection
• Available Security Method: WEP, WPA2-PSK (AES), Mixed Mode, None
• Wireless LAN Standards: IEEE 802.11 a/b/g/n/ac*
* 20 MHz channel bandwidth only
USB
Capable of Mass Storage Class USB Memory
Compatible Decoding Formats
Current Supply Capacity: 1.0 A
Decoding Format
• Dolby TrueHD, Dolby Digital Plus
• Dolby Digital
• DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Express
• DTS, DTS 96/24
Bluetooth
Sink Function
• Source Device to AVR (ex. Smartphone/Tablet)
• Supported profile
– A2DP, AVRCP
• Supported codec
– SBC, AAC
Post Decoding Format
• Dolby Pro Logic II Music, Dolby Pro Logic II Movie, Dolby Pro Logic II Game
• DTS Neo: 6 Music, DTS Neo: 6 Cinema
Source Function
• AVR to Sink Device (ex. Bluetooth Headphone)
• Supported profile
– A2DP, AVRCP
• Supported codec
– SBC
Capable of Play/Stop Operation from Sink Device
Bluetooth version
• Ver. 4.2
Wireless output
• Bluetooth Class 2
Maximum communication distance
• 10 m (33 ft) without interference
153
En
Audio Section
Output Level / Output Impedance
• SUBWOOFER
Rated Output Power (2-channel driven)
• [U.S.A. and Canada models] (20 Hz to 20 kHz, 0.09% THD, 8 Ω)
• [Other models] (20 Hz to 20 kHz, 0.09% THD, 6 Ω)
– Front L/R
Headphone Jack Rated Output / Impedance
80 W+80 W
• [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω)
– Front L/R
– Center
– Surround L/R
1 V/1.2 k
• AV 2 etc. (1 kHz, 50 mV, 8 Ω)
100 mV/470 
Frequency Response
95 W+95 W
• AV 2 etc. to Front (10 Hz to 100 kHz)
+0/-3 dB
95 W
95 W+95 W
Signal to Noise Ratio (IHF-A Network)
• AV 2 etc. (DIRECT) (Input 1 kΩ Shorted, Speaker Out)
110 dB or more
Rated Output Power (1-channel driven)
Residual Noise (IHF-A Network)
• [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω)
• [Other models] (1 kHz, 0.9% THD, 6 Ω)
– Front L/R, Center, Surround L/R
• Front L/R (Speaker Out)
150 μV or less
115 W/ch
Channel Separation
Maximum Effective Output Power (1-channel driven)
• AV 2 etc. (Input 1 kΩ Shorted, 1 kHz/10 kHz)
70 dB/50 dB or more
• [U.S.A. and Canada models]
(1 kHz, 10% THD, 8 Ω)
– Front L/R, Center, Surround L/R
(1 kHz, 10% THD, 6 Ω)
– Front L/R, Center, Surround L/R
140 W/ch
145 W/ch
• Range
• Step
135 W/ch
• Bass Boost/Cut
• Bass Turnover
Dynamic Power (IHF)
• Treble Boost/Cut
• [U.S.A. and Canada models]
– Front L/R (8/6/4/2 Ω)
• Treble Turnover
3.5 kHz
• H.P.F. (Front, Center, Surround)
12 dB/oct.
• L.P.F. (Subwoofer)
24 dB/oct.
100 or more
200 mV/47 k
Maximum Input Signal
• AV 2 etc. (1 kHz, 0.5% THD, Effect On)
350 Hz
±6 dB/0.5 dB Step at 20 kHz
(fc=40/60/80/90/100/110/120/160/200 Hz)
Input Sensitivity / Input Impedance
• AV 2 etc. (1 kHz, 100 W/6 Ω)
±6 dB/0.5 dB Step at 50 Hz
Filter Characteristics
110/130/160 W
Damping Factor
• Front L/R, 20 Hz to 20 kHz, 8 Ω
0.5 dB
110/130/160/180 W
• [Other models]
– Front L/R (6/4/2 Ω)
MUTE, -80 dB to +16.5 dB
Tone Control Characteristics
• [Other models] (1 kHz, 10% THD, 6 Ω)
– Front L/R, Center, Surround L/R
Volume Control
2.3 V
154
En
Video Section
AM Section (RX-V485)
Video Signal Type
Tuning Range
• [U.S.A., Canada, Korea, Taiwan, Brazil and General models]
• [Other models]
NTSC
PAL
Video Signal Level
• Composite
1 Vp-p/75 
• [U.S.A. and Canada models]
• [Asia, Taiwan, Brazil, General, and Central and South
America models]
1.5 Vp-p or more
• [U.K. and Europe models]
531 kHz to 1611 kHz
• [Other models]
531 kHz to 1611 kHz
Tuning Range
174 MHz to 240 MHz (Band III)
Video Signal to Noise Ratio
50 dB or more
Support Audio Format
MPEG 1 Layer II/MPEG 4 HE-AAC v2
FM Section
Antenna
Tuning Range
• [Asia, Taiwan, Brazil, General, and Central
and South America models]
75  unbalanced
87.5 MHz to 107.9 MHz
87.5/87.50 MHz to 108.0/108.00 MHz
• [U.K. and Europe models]
87.50 MHz to 108.00 MHz
• [Other models]
87.50 MHz to 108.00 MHz
50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
• Monaural
530/531 kHz to 1710/1611 kHz
DAB Section (RX-D485)
Video Maximum Input Level
• [U.S.A. and Canada models]
530 kHz to 1710 kHz
3 μV (20.8 dBf)
Signal to Noise Ratio (IHF)
General
Power Supply
• [U.S.A. and Canada models]
AC 120 V, 60 Hz
• [Brazil and Central and South America
models]
AC110 to 120/220 to 240 V, 50/60 Hz
• [Taiwan model]
AC110 to 120/220 to 240 V, 50/60 Hz
• [China model]
AC 220 V, 50 Hz
• Monaural
65 dB
• [Korea model]
AC 220 V, 60 Hz
• Stereo
64 dB
• [Australia model]
AC 240 V, 50 Hz
• [UK, Europe, Russia and Middle East
models]
AC 230 V, 50 Hz
Harmonic Distortion (IHF, 1 kHz)
• Monaural
0.5%
• Stereo
0.6%
• [Asia and General models]
AC 220 to 240 V, 50/60 Hz
Power Consumption
260 W
Antenna Input
75  unbalanced
155
En
Standby Power Consumption
• HDMI Control Off, Standby Through Off
0.1 W
• HDMI Control On, Standby Through Auto (No Signals)
1.0 W
• HDMI Control On, Standby Through On (No Signals)
1.0 W
• HDMI Control Off, Standby Through Off, Network Standby On
– Wired
1.3 W
– Wireless (Wi-Fi)
1.4 W
• HDMI Control On, Standby Through On, Network Standby On
– Wired
2.1 W
– Wireless (Wi-Fi)
2.2 W
• HDMI Control Off, Standby Through Off, Bluetooth Standby On
1.4 W
• HDMI Control On, Standby Through On, Bluetooth Standby On
2.0 W
Maximum Power Consumption
• [Taiwan and General models]
600 W
Dimensions (W x H x D)
435 x 161 x 327 mm (17-1/8” x 6-3/8” x 12-7/8”)
Reference Dimensions (with wireless antenna upright)
* Including legs and protrusions
435 x 225.5 x 327 mm (17-1/8” x 8-7/8” x 12-7/8”)
Weight
7.8 kg (17.2 lbs)
* The contents of this manual apply to the latest specifications as of the publishing date. To obtain
the latest manual, access the Yamaha website then download the manual file.
156
En
Default settings
Default settings of the Option
menu
Default settings of the Setup
menu
TV Audio Input
The default settings of the “Option” menu are as
follows.
The default settings of the “Setup” menu are as follows.
ARC
Speaker
SCENE
Treble, Bass
Bypass (0.0 dB)
Tone Control
* When both “Treble” and “Bass” are
0.0 dB, “Bypass” appears.
DSP/Surround
• DSP Level
• Adaptive DRC
0 dB
Off
• Enhancer
Standby Sync
Configuration
• Power Amp Assign
Surround
• Subwoofer
Use
On
On
• NET, RADIO
Off
Sound
Small
• Center
Small
DSP Parameter
• Surround
Small
• Panorama
• Crossover
80 Hz
• Center Width
Normal
Auto
• BD / DVD, TV
• Front
• Subwoofer Phase
AUDIO1
• Dimension
Off
3
0
– TUNER, (network sources), AirPlay,
SERVER, NET RADIO, Bluetooth, USB
On
• Extra Bass
Off
• Center Image
0.3
– Others
Off
• Virtual CINEMA FRONT
Off
• Monaural Mix
Off
Distance
Volume Trim
• Input Trim
0.0 dB
• Subwoofer Trim
0.0 dB
• ZoneB Trim
0.0 dB
3.00 m (10.0 ft)
Level
0.0 dB
Equalizer
Off
Test Tone
Off
Lipsync
On
Video Out
Off
FM Mode
Stereo
HDMI Control
Off
Off
Audio Output
Off
Standby Through
Off
Shuffle
Repeat
Volume Interlock
Off
Limited
Lipsync
• Select
Auto
(This setting is effective when a TV that
supports an automatic lipsync function is
connected to the unit via HDMI.)
• Adjustment
0 ms
Dialogue
HDMI
• Dialogue Level
Volume
• Scale
Off
HDCP Version
• HDMI 1-4
Auto
157
En
dB
• Dynamic Range
Maximum
• Max Volume
+16.5 dB
• Initial Volume
4K Upscaling
0
• ZoneB Volume
Off
Sync.
ECO
Network Update
Auto Power Standby
• U.K., Europe, Russia, Middle East and
Korea models
-
Bluetooth
20 minutes
• Other models
Off
ECO Mode
Off
Bluetooth
On
Audio Receive
• Disconnect
-
• Bluetooth Standby
Function
On
• HDMI 1-4
Auto
• Others
Manual
(For AUX, AUDIO3, TUNER, MusicCast
Link, SERVER, NET RADIO, USB only
“Manual” can be selected.)
Input Skip
The default settings of the “ADVANCED SETUP” menu
are as follows.
SP IMP.
(U.S.A. and Canada models only)
REMOTE ID
Audio Send
Input Rename
Default settings of the
ADVANCED SETUP menu
• Transmitter
Off
• Device Search
-
Language
English
Off
(Asia, Taiwan, Brazil, General, and Central
and South America models only)
• U.S.A., Canada, Korea, Taiwan, Brazil
and Central and South America models
UPDATE
Wired
IP Address
• DHCP
On
MAC Address Filter
Off
Network Standby
Network Name
MusicCast Link Power Interlock
BKUP
CANCEL
USB
VERSION
DMC Control
MODE 1
Default
INIT
Network Connection
PAL
Off
Network
Information
NTSC
0
BKUP/RSTR
Remote Color Key
FM50/AM9
TV FORMAT
4K MODE
Memory Guard
ID1
TU
• Other models
Dimmer
8 Ω MIN
Enable
Auto
Off
158
En
-
Yamaha Global Site
https://www.yamaha.com/
Yamaha Downloads
http://download.yamaha.com/
Manual Development Group
© 2018 Yamaha Corporation
Published 07/2019 NV-D0
AV17-0111
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising