Yamaha | YAS-706 | Owner's Manual | Yamaha YAS-706 Owner's Manual

Yamaha YAS-706 Owner's Manual
Front Surround System
Owner’s Manual
Read the supplied booklet “Quick Start Guide” before using the unit.
English
EN
Contents
PREPARATION
NETWORKS
Supplied items .......................................................................3
Features ..................................................................................4
Frequently asked questions..................................................5
Part names and functions .....................................................6
Installation .............................................................................9
Networks.............................................................................. 26
Installing the center unit on a TV stand, etc............................................. 10
Playing back music with AirPlay ................................................................... 41
Mounting the center unit on a wall............................................................. 10
Playing back music stored on mobile devices ........................................ 42
Network functions and the MusicCast CONTROLLER app .................. 26
Connecting to a network ................................................................................ 26
Playing back music stored on media servers (PCs/NAS)...................... 39
Listening to Internet radio.............................................................................. 40
Connecting the unit ............................................................ 12
Connecting the unit to a TV ........................................................................... 12
Connecting playback devices........................................................................ 13
Turning on the unit............................................................. 15
SETTINGS
Settings ................................................................................ 43
Setup menu.......................................................................................................... 43
Displaying the menu screen on the TV ...................................................... 16
Configuring 4K video mode........................................................................... 51
Screen displayed on a TV when the unit is turned on .......................... 17
Updating the unit’s firmware ........................................................................ 52
Initializing the unit............................................................................................. 53
PLAYBACK
Operations........................................................................... 18
Operating the unit by TV’s remote control (HDMI control)................ 22
Wireless playback of audio via Bluetooth connection .... 23
Listening to the sound from a Bluetooth device (Receiving) ............ 24
Using wireless headphones to listen to audio (Transmitting)........... 25
APPENDIX
Troubleshooting ................................................................. 54
Pairing the center unit and subwoofer ...................................................... 62
Specifications ...................................................................... 63
About this manual
NOTE
This indicates precautions for use of the product and its feature limitations.
HINT
This indicates supplementary explanations for better use.
En
2
PREPARATION
Supplied items
Preparing the remote control
Peel off the protection sheet before use.
Make sure you have received all of the following items.
The YAS-706
Center unit (YAS-CU706)
Wireless subwoofer
(NS-WSW121)
Supplied accessories
Operating range of the remote control
Operate the remote control within the range as shown below. When the center unit is
mounted on a wall, point the remote control at the remote control sensor on the top
panel (p. 10).
Remote control
Batteries x 2
(AAA, R03, UM4)
Optical digital audio cable*
(1.5 m [4.9 ft])
Remote control sensor
Mounting template
Spacers × 2
Use when mounting the center unit on a wall
Use when mounting the
center unit on a wall
Within 6 m (20 ft)
Cover (for the TV remote repeater)
• Owner’s Manual CD-ROM
• Quick Start Guide
• MusicCast Setup Guide
* The China model comes with a coaxial digital audio cable rather than an optical
digital audio cable.
PREPARATION ➤ Supplied items
En
3
Features
This front surround system is easily installed and has a built-in subwoofer for enjoying powerful and realistic sound with connection to a TV or other
devices.
• AIR SURROUND XTREME
Enjoy 7.1 channel surround sound, which creates a wide and deep soundstage, as if speakers are positioned not only in front of, but also to the left, right, and behind the listener.
• Bass extension
Enjoy powerful bass with Yamaha’s exclusive bass boosting technology, Advanced Bass Extension Processing (p. 19).
• Unrestricted playback of music over a network using MusicCast CONTROLLER
The free app for mobile devices*, MusicCast CONTROLLER, allows you to listen to music stored on mobile devices such smartphones, or on servers, or to listen to Internet radio
stations and many kinds of major streaming services (p. 26).
This app also allows you to distribute content to other MusicCast-enabled devices for synchronized playback.
The MusicCast CONTROLLER app can also be used to perform such tasks as selecting the input source and adjusting volume.
See the “MusicCast Setup Guide”, or visit the Yamaha website for details.
Search for “MusicCast CONTROLLER” on the App Store or Google Play.
• Transmission of 4K high dynamic range (HDR) video supported
Enjoy high-resolution video from a cable or satellite set-top box, or a BD/DVD player. When a TV that supports Audio Return Channel (ARC) is used, this ARC-compatible unit
can be connected to the TV via a single HDMI cable (p. 12).
• HDMI control function
Link functions of a TV and the unit are available using the TV’s remote control (p. 22).
• Clear voice
This feature makes speech, such as dialog and narration, clearer (p. 19).
* In this manual, iOS and Android mobile devices are collectively referred to as “mobile devices”. The specific type of mobile device is noted in explanations as needed.
PREPARATION
➤ Features
En
4
Frequently asked questions
The following section covers popular functions and frequently asked questions about the unit.
Q1
Switching between remote controls is inconvenient. Can I use the TV’s
remote control to operate the unit?
A1
Yes. When the unit is connected to a TV via HDMI cable, the TV’s remote
control can be used to operate both the TV and the unit (p. 22).
Q2
Can I improve the clarity of dialogue?
A2
Yes. Dialogue in movies, TV news, sports programs, etc., can be made
clearer using the “clear voice” function (p. 19).
Q3
Can I operate the unit using a smartphone?
A3
Yes. The unit can be operated with a smartphone or other mobile device
using the free mobile device app, MusicCast CONTROLLER, installed on the
device (p. 26).
The MusicCast CONTROLLER app allows you to perform such tasks as
turning the unit on or off, selecting the input source, and adjusting the volume.
Q4
Can headphones be used?
A4
Yes. Bluetooth wireless headphones can be used (p. 25).
Q5
Can sound playing via the unit be played on another audio device at the
same time, or vice versa?
A5
Yes. Sound from one MusicCast-enabled audio device can be played on
another MusicCast-enabled audio device at the same time. Note that all
devices must support MusicCast.
Tap
in the MusicCast CONTROLLER app’s Rooms screen, and follow
the on-screen instructions to set up the master room (the source device) and
to link other rooms (devices to which audio is distributed) with the master
room. Refer to the supplied MusicCast Setup Guide, or visit Yamaha’s
website for details.
Q6
How can music content stored on a smartphone be played via the unit?
A6
Choose one of the following methods.
Connecting via Bluetooth (p. 24)
This method is useful for playing music content stored on a smartphone or
other mobile device without connecting to a network.
Playing music with AirPlay (p. 41)
This method is useful for those using an iPhone or other iOS device.
Playing music with the MusicCast CONTROLLER app (p. 42)
This method is useful for playing music content stored on a smartphone or
other mobile device on which the MusicCast CONTROLLER app is installed.
Q7
Can Internet radio be played?
A7
Yes. Use the MusicCast CONTROLLER app’s Net Radio feature (p. 40).
PREPARATION
➤ Frequently asked questions
En
5
Part names and functions
Center unit (front panel/top panel)
1
STATUS
TV
HDMI1
HDMI2
COAXIAL
2
ANALOG BLUETOOTH SURROUND
NET
8
3
4
5
6
Keys are located in the rear
part of the center unit.
CONNECT
7
9
8
9
7
1 Indicators
3
The indicators on the top panel flash or glow, to show
the operation and setting status.
In this manual, illustrations of the nine in-line
indicators are used for explanation as necessary.
: Off
: Glows
: Flashes
(input) key
Select an input source to be played back (p. 18).
4
(mute) key
Mute the audio output. Press the key again to unmute
(p. 20).
5
Example: When the STATUS indicator glows, and
the
indicator flashes
/
(volume +/-) keys
Adjust the volume (p. 20).
6
(power) key
7 Remote control sensors
Receive infrared signals from the remote control of
the unit (p. 3) or TV’s remote control (p. 10).
The remote control sensors are located on the front
panel and on the top panel of the center unit (p. 10).
8 Dual built-in subwoofers
The built-in subwoofers are located in the top part of
the center unit.
9 Speakers
Turn on or off the unit (p. 18).
2 CONNECT key
Use to connect the unit to a network using the
MusicCast CONTROLLER app (p. 27).
HINT
• The unit may automatically turn off when the auto power
standby function is enabled (p. 50).
PREPARATION ➤
Part names and functions
En
6
Center unit (rear panel)
1
3
2
4
5
6
7
8
R
9
0
A
L
HDMI
OUT (ARC)
1 Power cable
For connecting to an AC wall outlet (p. 14).
2 TV remote repeater
Used to transmit signals from the TV’s remote
control, received by the unit’s remote control sensor,
to the TV (p. 10).
3 HDMI OUT (ARC) jack
For connecting to an HDMI-compatible TV and
outputting video/audio signals (p. 12).
4 HDMI IN 1 and 2 jacks
For connecting HDMI-compatible playback devices
such as a BD/DVD player, a satellite and cable TV
tuner, and a game console (p. 13).
IN 1
IN 2
TV
COAXIAL
NETWORK
ANALOG
SUBWOOFER SYSTEM UPDATE ONLY
CONNECTOR
OUT
5 TV input jack
For connecting to a TV with an optical digital audio
cable (p. 12).
6 COAXIAL input jack
For connecting to a playback device, such as a Bluray Disc (BD) player, with a coaxial digital audio
cable (p. 13).
7 NETWORK jack
9 SUBWOOFER OUT jack
For connecting to the supplied subwoofer using a
wired connection (p. 15).
0 SYSTEM CONNECTOR jack
For connecting to the supplied subwoofer using a
wired connection (p. 15).
A UPDATE ONLY jack
Use to update this unit’s firmware (p. 53).
For connecting to a network with a network cable (p.
26).
8 ANALOG input jacks
For connecting to an external device with a stereo
cable (p. 12, 14).
PREPARATION ➤
Part names and functions
En
7
Subwoofer (rear panel)
SUBWOOFER
PAIRING
STATUS
SYSTEM
CONNECTOR
2
3
4
5
SUBWOOFER
PAIRING
STATUS
SYSTEM
CONNECTOR
INPUT
INPUT
1
1 Power cable
For connecting to an AC wall outlet (p. 14).
2 SUBWOOFER PAIRING key
Used to pair the center unit with the subwoofer
manually (p. 62). Use a pin or other pointed object to
press this key.
3 STATUS indicator
Shows subwoofer’s connection status (p. 15).
Glows green: Power on
Glows red: Power off
5 INPUT jack
For connecting to the center unit using a wired
connection (p. 15).
4 SYSTEM CONNECTOR jack
For connecting to the center unit using a wired
connection (p. 15).
PREPARATION ➤
Part names and functions
En
8
Installation
Position the center unit and subwoofer as shown below with installation.
Cautions
• Be sure to install the center unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.
• Do not stack the center unit and subwoofer directly on top of other playback devices, or vice versa. Doing so may cause a malfunction due to heat and vibrations.
• Do not hold the speaker portion (fabric parts) on the front and the top of the center unit.
• The center unit and subwoofer contain non-magnetic shielding speakers. Do not place magnetically sensitive items (hard disk drive, etc.) near the unit.
• Depending on your installation environment, it may be better to connect the unit and external devices before installing the unit.
Center unit
• The center unit can be installed on
a TV stand (p. 10) or mounted on a
wall (p. 10). It is equipped with
remote sensors positioned to
support installation on a TV stand
or mounting on a wall.
• To prevent sound reflecting off of walls,
angle the subwoofer slightly toward the
center of the room.
Subwoofer
Wireless connections
The center unit and subwoofer communicate wirelessly. Subwoofer performance may be affected if the subwoofer is placed on a metal rack, or if there is a metal plate between the
subwoofer and the center unit. Use a wired connection to connect the subwoofer to the center unit if sounds are interrupted due to the installation condition (p. 15).
PREPARATION
➤ Installation
En
9
Installing the center unit on a TV stand, etc.
Mounting the center unit on a wall
Position the center unit so that the keys are on the far side of the center unit.
Cautions
• When mounting the center unit on a wall, all installation work must be performed by a qualified
contractor or dealer. The customer must never attempt to perform this installation work. Improper or
inadequate installation could cause the center unit to fall, resulting in personal injury.
• To avoid falling the center unit, attach the center unit to a dry wall.
• Make sure you use commercially available screws that can support the weight of the installation
(specified in Step 2 on the next page). Using clamps other than specified screws, such as short screws,
nails, and two-sided tape, may cause the center unit to fall.
• Fix the cables in place where they will not become loose. If your foot or hand accidentally gets caught on
a loose cable, the center unit may fall.
• Do not lean on the center unit or apply excessive force to the top of the unit. Doing so may cause the
center unit to fall.
• Check that the center unit is fixed securely after the installation. Yamaha will bear no responsibility for
any accidents caused by improper installations.
Keys
Mount the center unit on the wall so that the keys face upwards.
Remote control sensor (front panel)
About the TV remote repeater
The center unit receives signals from the TV’s remote control via the remote control
sensor located on the front panel. It then transmits these signals from the TV remote
repeater located on the rear panel.
Caution
Position the center unit more than 5 cm (2 in) away from the TV to ensure proper transmission of signals
from the remote control to the remote control sensor on the TV.
Keys
Remote control sensor
(top panel)
TV remote repeater
TV’s remote control
More than 5 cm (2 in)
TV remote control sensor
HINT
• This function is available only when the TV’s remote control uses infrared signals.
• The TV’s remote control can be used even when the unit is turned off as long as the unit’s power cable is
plugged into an AC wall outlet.
PREPARATION
➤ Installation
En
10
How to mount the center unit on the wall
1 Attach the mounting template on a wall and mark for the screw holes.
Tapes or thumbtacks
Mounting template (supplied)
Using the supplied cover (for the TV remote repeater)
When the center unit is mounted on a wall, the TV remote repeater may appear white. If
this presents a distraction while watching TV, attach the supplied cover to the TV remote
repeater.
Cover (for the TV remote repeater)
Peel off the backing and attach
the sticky sheet.
Screw
holes
TV remote repeater
2 Remove the mounting template from the wall, then install commercially
available screws (as illustrated below) at the points marked on the wall.
7 to 9 mm
(1/4" to 3/8")
4 mm (#8)
13 to 15 mm (1/2" to 5/8")
20 mm (3/4")
or more
3 Peel off the backing paper from the spacers and attach the adhesive face to the
center unit as illustrated below.
Spacers
4 Hang the center unit on the screws.
Mounting holes
on bottom of the
unit
PREPARATION
➤ Installation
En
11
Connecting the unit
TVs that do not support Audio Return Channel (ARC)
Connect the TV to the unit with an HDMI cable (not supplied) and an optical digital audio
cable.
Connecting the unit to a TV
HDMI OUT (ARC)
jack
HDMI input
Connect a TV to the unit so that video input to the unit can be output to the TV. You can
also enjoy playback of TV audio on the unit.
HDMI
HDMI
HINT
HDMI
OUT (ARC)
• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m (16 ft) is
recommended to prevent degradation of signal quality.
• For playback of 3D and 4K video content, use a high-speed HDMI cable.
• This unit supports HDCP version 2.2, a copy protection technology. For playback of 4K video, connect the
unit to the HDMI input jack (one compatible with HDCP 2.2) on an HDCP 2.2-compliant TV.
• To play 4K (4:4:4) video content, set “4K MODE” to “MODE 1” (p. 51).
Center unit
(rear)
TVs that support Audio Return Channel (ARC)
TV input jack
ARC-compatible HDMI input
HDMI
HDMI
TV
O
TV
Connect the TV to the unit with an HDMI cable (not supplied).
HDMI OUT (ARC)
jack
OPTICAL
O
1. Remove the cap
Audio output
(optical digital)
2. Check the direction of the
plug
HDMI
(ARC)
OUT (ARC)
TV audio will be output through the unit by switching the unit’s input to TV using the TV
key on the remote control.
Center unit (rear)
HINT
TV
When connecting a TV that supports Audio Return Channel (ARC), enable the HDMI
control function (p. 46).
• If the TV has no optical jack
Connect the audio output jack on the TV to the ANALOG input jacks or COAXIAL input jack on the unit. TV
audio will be output through the unit by switching the unit’s input to ANALOG or COAXIAL using the
ANALOG or COAXIAL key on the remote control accordingly.
What is Audio Return Channel (ARC)?
In order for the unit to play audio from a TV, the TV must usually be connected to the
unit via an audio cable as well as an HDMI cable. If, however, the TV supports Audio
Return Channel (ARC), TV audio signals can be input to the unit via the HDMI cable
that outputs video signals from the unit to the TV.
HINT
• Use an ARC-compatible HDMI cable.
PREPARATION
➤ Connecting the unit
En
12
Coaxial connection
Connecting playback devices
Connect video devices such as BD/DVD players, cable or satellite set-top boxes (STBs),
and game consoles to the unit. Depending on the video/audio output jacks available on
your video device, choose one of the following connections. We recommend using an
HDMI connection if the video device has an HDMI output jack.
Connect a video device to this unit via a coaxial digital cable. Next, connect the video
device’s video output to the TV’s video input.
Center unit (rear)
Video device
HDMI connection
To video
output jack
Connect a video device to the unit with an HDMI cable (not supplied).
COAXIAL
NOTE
• This unit supports HDCP version 2.2, a copy protection technology.
C
C
COAXIAL
Center unit (rear)
Video device
HDMI output
HDMI IN 1 and 2 jacks
HDMI
IN 1
Audio output
(coaxial digital)
COAXIAL input jack
HDMI
To video
input jack
IN 2
TV
HDMI
HDMI
The audio played on the video device will be output though the unit by switching the
unit’s input to COAXIAL using the COAXIAL key on the remote control.
The audio/video played on the video device will be output though the unit by switching
the unit’s input to HDMI 1 or 2 using the HDMI 1 or 2 key on the remote control.
HINT
• Once the HDMI control function has been activated (p. 46), video and audio content from playback devices
can be output from the TV even when this unit is off (HDMI signal pass-through).
• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m (16 ft) is
recommended to prevent degradation of signal quality.
• For playback of 3D and 4K video content, use a high-speed HDMI cable.
PREPARATION
➤ Connecting the unit
En
13
Analog connection
Connecting the power cable
Connect a video device to this unit via a stereo cable (not supplied). Next, connect the
video device’s video output to the TV’s video input.
After all the connections are complete, plug in the power cable of the center unit and the
subwoofer.
Center unit (rear)
Center unit (rear)
Video device
ANALOG input
jacks
R
L
To video
output jack
AUDIO
L
ANALOG
L
To an AC wall outlet
R
R
R
L
Audio output
(analog)
Subwoofer (rear)
To video
input jack
TV
SUBWOOFER
PAIRING
STATUS
SYSTEM
CONNECTOR
INPUT
The audio played on the video device will be output though the unit by switching the
unit’s input to ANALOG using the ANALOG key on the remote control.
To an AC wall outlet
PREPARATION
➤ Connecting the unit
En
14
Turning on the unit
This section explains initial setup of the unit, performed when it is
turned on for the first time after purchase.
z
1
Press the z key to turn on the unit.
When the center unit is turned on, the center unit and
subwoofer are automatically connected via wireless
connection. Once the connection has been successfully
established, the STATUS indicator on the subwoofer glows as
shown in the illustration below, and the unit is ready for play
back.
Wired connection
If there is no sound coming from the subwoofer, or if sound is
intermittent, due to the influence of radio waves from other
devices, connecting the center unit and subwoofer via cables will
solve the problem. Connect the center unit and subwoofer via an
RCA mono cable (not supplied) and a 3.5 mm monaural mini
plug cable (not supplied). A 3.5 mm monaural mini plug cable is
required to turn the center unit and subwoofer on and off at the
same time.
RCA mono cable
3.5 mm monaural mini
plug cable
STATUS
INPUT
SYSTEM
CONNECTOR
STATUS
indicator
Glows green
SUBWOOFER
PAIRING
STATUS
SYSTEM
CONNECTOR
INPUT
SUBWOOFER SYSTEM
CONNECTOR
OUT
NOTE
• If the STATUS indicator does not glow properly the first time the unit is
turned on, pair the center unit and subwoofer manually. See “Pairing the
center unit and subwoofer” (p. 62).
To connect the center unit and subwoofer using a wired
connection, set “Bass Out” of “Subwoofer” in the setup menu to
“Wired” (p. 45).
When the center unit is turned on, the subwoofer turns on and its
STATUS indicator glows green.
NOTE
• Be sure the center unit is turned off before connecting the subwoofer.
• The subwoofer supplied with the unit can only be connected.
PREPARATION ➤ Turning on the unit
En
15
Displaying the menu screen on the TV
Visual operation of this unit is
possible by displaying its menu
screen on the TV.
Turn on the unit and the TV, and
then use the input button on the
TV’s remote control to switch input
so that video input from this unit is
displayed.
When this unit and the TV are
connected as shown below, select
“HDMI 1” using the TV’s remote
control.
TV remote control (example)
Switch input
sources
The menu display
The menu is displayed on the TV screen when the SETUP key is
pressed. When the TV is receiving HDMI signals, the menu is
superimposed over video content. Press the SETUP key a second
time to cancel menu display.
TV
SETUP
Center unit (rear)
1
HDMI INPUT
2
3
OUT (ARC)
HDMI
HDMI
PREPARATION ➤ Turning on the unit
En
16
Screen displayed on a TV when the unit is turned on
When the unit is turned on for the first time after purchase, the
screen shown below will be displayed on the TV and the
indicator will be flashing.
Selecting a language for menu display
1
2
3
Turn the unit and TV on.
Switch the TV’s input to display video input from
this unit (p. 16).
Press and hold the SETUP key until the “OSD
Language” menu appears on the TV.
/
ENTER
RETURN
SETUP
Follow the on-screen instructions to use an iOS device (iPhone,
etc.) to connect the unit to a wireless network (p. 41)).
Connecting the unit to a wireless network is simpler when the
MusicCast CONTROLLER app installed on your mobile device is
used. Press the RETURN key to cancel this screen, and then refer
to p. 27.
HINT
HINT
• This screen will not be displayed and the
indicator will not be flashing if the
unit is connected to a router via its NETWORK jack (wired connection).
When the menu is not displayed
• Confirm the following cases.
− The HDMI input jack of your TV and the HDMI OUT (ARC) jack of the unit
are connected.
− The input of your TV is set to “HDMI 1” (example).
4
Use the S/T key to select the desired language and
press the ENTER key.
Settings
ENGLISH (default), FRANÇAIS, ESPAÑOL
5
Press the SETUP key to exit the setup menu.
PREPARATION ➤ Turning on the unit
En
17
PLAYBACK
Operations
1
Remote control signal transmitter
Transmits infrared signals.
2
(power) key
Turns on or off the unit.
Turned on
The indicator for the last input
source selected glows.
1
2
Indicates the surround setting, and network (p.
26) or Bluetooth (p. 24) connection status.
Turned off (when the HDMI control function (p.
46) or network standby function (p. 49) is
enabled)
Input keys
Select an input source to be played back.
TV .............................TV audio or sound from a device
connected to the unit’s TV input
jack
HDMI 1, HDMI 2 .......Sound from a device connected
to the HDMI IN 1 or HDMI IN 2
jack
COAXIAL .................Sound from a device connected
to the COAXIAL input jack
ANALOG..................Sound from a device connected
to the ANALOG input jacks
BLUETOOTH ...........Sound from a Bluetooth
connected device
NET ..........................Audio acquired via a network
The last audio source listened to
is selected when the NET key is
pressed.
The indicator for the selected input source glows.
(Example: when TV is selected)
Glows (red)
TV
Turned off
HDMI1
HDMI2
COAXIAL
HDMI 1 (green)
HDMI 2 (red)
ANALOG
BLUETOOTH
NET
BLUETOOTH (green)
NET (red)
HINT
• To play sound from the device connected to the TV or to
watch video from the device, set the TV’s input source to the
playback device.
• For playback from a Bluetooth device, refer to page 24. For
audio playback via a network, refer to pages 39 to 42.
PLAYBACK
➤ Operations
En
18
7
5
5
Surround program keys and STEREO
key
S/T/W/X keys, ENTER key, RETURN
key
Select surround playback using the MOVIE, MUSIC,
SPORTS, GAME or TV PROGRAM key, or select
stereo (2 channels) playback using STEREO key.
When a surround program (MOVIE, MUSIC,
SPORTS, GAME, or TV PROGRAM) is selected,
you can enjoy a realistic sound effect using
Yamaha’s exclusive AIR SURROUND XTREME.
Use to configure the setup menu.
MOVIE, MUSIC, SPORTS, GAME, or
TV PROGRAM
3
4
3
............................
STEREO..............
SURROUND
SURROUND
Glows (surround playback)
Off (stereo playback)
6
SETUP key
Display the setup menu on the TV.
HINT
• Dolby Pro Logic II is used when 2-channel stereo signal is
played with a surround program other than MUSIC.
7
6
4
CLEAR VOICE key
BASS EXTENSION key
Enable/disable the bass extension function. When
this function is enabled, you can enjoy a powerful
bass sound with the Yamaha original bass boost
technology “Advanced Bass Extension
Processing.”
Enable/disable the clear voice function.
When this function is enabled, human voices such
as lines in movies and TV shows, or news and
sport commentary, are played clearly.
Enabled: Flashes three times and goes out
Disabled: Flashes once and goes out
Enabled: Flashes three times and goes out
Disabled: Flashes once and goes out
PLAYBACK
➤ Operations
En
19
8
9
SUBWOOFER (+/–) keys
NET RADIO (1–3) keys
Adjust the volume of the subwoofer.
Assign audio input via a network (Internet radio
stations, music files stored on media servers, etc.)
to the NET RADIO key.
Volume down (–)
Volume up (+)
MUTE key
Mute the audio output. Press the key again to
unmute.
Tune-in to an assigned Internet radio station
1 Press the NET RADIO 1, 2, or 3 key to which
the desired Internet radio station has been
assigned.
Flash (on mute)
VOLUME (+/–) keys
HINT
Adjust the volume of the unit.
Volume down (–)
8
Assign a station
1 Play the desired Internet radio station (p. 39
to 42).
2 Hold down the NET RADIO 1, 2, or 3 key for
more than 3 seconds.
Volume up (+)
• When an Internet radio station is assigned to the NET
RADIO 1, 2, or 3 key on the remote control, the same station
is also registered with No. 1, 2, or 3 in the MusicCast
CONTROLLER app’s “Favorites”. When an Internet radio
station is registered with No. 1, 2, or 3 in “Favorites” with the
MusicCast CONTROLLER app, the same station is also
assigned to the NET RADIO 1, 2, or 3 key on the remote
control.
9
PLAYBACK
➤ Operations
En
20
10
INFO key
While the INFO key is held down, status, including the type of audio signal being input and whether the clear
voice function is enabled or disabled, can be confirmed by the glowing of indicators.
Type of audio signal being input
Unit functions and positioning
TV audio input signal with the ARC function activated
The bass extension function is enabled
Green
Green
DTS digital surround, DTS 96/24, DTS Express, DTS-HD
High Resolution, or DTS-HD Master Audio
The clear voice function is enabled
Green
Green
When positioned on top of something, such as a TV stand
Dolby Digital, Dolby Digital Plus, or Dolby TrueHD
Green
10
Green
When mounted on a wall
Blue
Dolby Pro Logic II is used (when 2-channel
stereo signal is played with a surround program
other than MUSIC)
Green
HINT
• The unit is able to play the following types of audio signal. The indicators do not glow when analog or PCM audio signal is input.
− Analog signal
− PCM (2 channels, multi-channels)
− Dolby Digital
− Dolby Digital Plus
− Dolby TrueHD
− DTS digital surround
− DTS 96/24
− DTS Express
− DTS-HD High Resolution
− DTS-HD Master Audio
PLAYBACK
➤ Operations
En
21
Operating the unit by TV’s remote control (HDMI control)
The HDMI control function (link function) coordinates operation of a TV and the unit so that the unit can be operated using the TV’s remote control.
When a TV is connected to the unit with an HDMI cable (p. 12), the TV’s remote control can be used to perform the following operations.
Coordinated functions via the TV remote control
HINT
Remote control of TV (Example)
1. Turn on/off
Both the TV and this unit turn on/off at the same time.
2. Switch input sources
• The unit’s input source switches accordingly when the TV’s input source
is switched.
Examples
– When a TV program is selected on the TV, the unit’s audio input
source is switched to the HDMI OUT (ARC) jack using the ARC
function or TV jack.
– When a BD/DVD player is connected to the HDMI IN 1–2 jack on the
unit, the unit’s input source switches to HDMI when the BD/DVD player
is selected with the TV’s remote control.
• The input source can be switched while the unit is off.
• Even if your TV supports the HDMI control function, some functions may not be available. For details, refer
to documentation supplied with your TV.
• We suggest using devices (TV, BD/DVD player, etc.) from the same manufacturer.
If the unit cannot be operated with the TV’s remote control
Confirm the settings are properly configured as described below.
– The HDMI control function of this unit is enabled (p. 46).
– The HDMI control function is enabled on the TV.
Examples of TV settings
• From the setup menu on your TV, select “Link setting” ➔ “HDMI control setting”, then set a setting
such as “HDMI control function” to “ON”.
• Set audio output to any option other than TV.
If the unit cannot be operated with the TV’s remote control even after the settings described above have
been applied correctly:
– Turn off this unit and the TV, and then turn them back on again.
– Disconnect the power cable of the unit and external devices connected to the unit via HDMI cable. Plug
them in again after about 30 seconds.
3. Switch the audio output device (TV or this unit (amplifier))
4. Adjust volume
This unit's volume can be adjusted when the TV’s audio output is
set to this unit (amplifier).
PLAYBACK
➤ Operations
En
22
Wireless playback of audio via
Bluetooth connection
The unit can be used to receive and play audio from a Bluetooth device, and to transmit
audio for playback on a Bluetooth device.
See documentation supplied with your Bluetooth device for more information.
NOTE
• Audio cannot be received by the unit from mobile devices and the like, and transmitted to speakers or
headphones at the same time.
HINT
• “Bluetooth” in the setup menu must be set to “On” (default; p. 46) to use Bluetooth functions.
• A Bluetooth device that has been assigned a passkey (PIN) other than “0000” cannot be connected to the
unit.
• Be sure that the Bluetooth device is no farther than 10 m (33 ft) from the unit when connecting the two.
• Refer to “Bluetooth” (p. 58) in “Troubleshooting” if a Bluetooth connection cannot be established.
• Adjust the Bluetooth device’s volume as needed.
Receiving audio from a Bluetooth device
Audio from a Bluetooth device, such as a mobile device or a digital music player, can be
played over a wireless connection.
Bluetooth device (such
as a mobile device)
Transmitting audio to a Bluetooth device
Use Bluetooth wireless headphones and the like to listen to audio.
Bluetooth speakers/
headphones
PLAYBACK
➤ Wireless playback of audio via Bluetooth connection
En
23
Listening to the sound from a Bluetooth device
(Receiving)
4
Play back a song on the Bluetooth
device.
Audio from a Bluetooth device, such as a mobile device or a digital music player, can be
played over a wireless connection.
NOTE
• Adjust the volume level of the Bluetooth device as required.
• When the network standby function (p. 49) is enabled, the unit turns on with operation of the Bluetooth
device.
1
Press the BLUETOOTH key on the unit’s remote control to select
Bluetooth as the input source.
The BLUETOOTH/NET indicator on the unit glows green.
BLUETOOTH
NET
Terminating Bluetooth connection
Perform one of the following operations to terminate Bluetooth connection.
The
indicator on the unit turns off when the connection is terminated.
• Turn off the Bluetooth function on the Bluetooth device.
• Press the BLUETOOTH key on the unit’s remote control for more than 3
seconds.
• Switch the unit's input source to any input source other than Bluetooth.
• Turn off the unit.
If a Bluetooth device has been connected before, the unit will connect to the last
connected device when the BLUETOOTH key is pressed. Terminate this
connection to connect a new device.
2
3
Enable the Bluetooth function on the Bluetooth device.
Select “YAS-706 xxxxxx Bluetooth”* in the Bluetooth device list on the
device.
* If the unit is registered as a MusicCast-enabled device (p. 27), the room name (network
name) is displayed.
If a passkey (PIN) is required, enter the number “0000”.
PIN 0 0 0 0
YAS-706 xxxxxx Bluetooth
When the connection is established, the
1
4
7
2
5
8
0
3
6
9
indicator on the unit glows.
Blue
The
indicator or a completion message is displayed on the Bluetooth device.
PLAYBACK
➤ Wireless playback of audio via Bluetooth connection
En
24
Using wireless headphones to listen to
audio (Transmitting)
8
Use the S/T keys to select a Bluetooth device, and
then press the ENTER key.
Bluetooth wireless headphones can be used to listen to audio
played via the unit.
Input
keys
NOTE
• Use a Bluetooth device that supports the A2DP profile.
• Audio input using AirPlay, or from a Bluetooth device, cannot be transmitted to
other Bluetooth devices for playback.
When a connection is established, the
glows.
HINT
• Audio will also be output from the unit.
• The MusicCast CONTROLLER app installed on your mobile device (p. 26) can
also be used to transmit audio to a Bluetooth device.
indicator on the unit
/
ENTER
SETUP
1
2
3
Blue
Turn on the Bluetooth device.
Select the input source (other than Bluetooth) with
the input keys.
5
6
7
Play an audio source, and enjoy music via the
Bluetooth device.
HINT
Press the SETUP key.
The setup menu is displayed on the TV screen.
4
9
Use the S/T keys to select “Bluetooth”, and then
press the ENTER key.
Use the S/T keys to select “Transmission”, and
then press the ENTER key.
Use the S/T keys to select “On”, and then press
the ENTER key.
Use the S/T keys to select “Device Search”, and
then press the ENTER key.
• “Not found” is displayed on the screen with step 8 if the unit was unable to find a
device to which to connect.
• “No Device Name” replaces the device name on the screen with step 8 if the unit
is unable to recognize the name of the device.
Terminating Bluetooth connection
Perform one of the following operations to terminate Bluetooth
connection.
The
indicator on the unit turns off when the connection is
terminated.
• Terminate Bluetooth connection from the Bluetooth device,
or turn off the Bluetooth device.
• Set “Transmission” in the setup menu to “Off”.
• Press the BLUETOOTH key on the unit’s remote control for
more than 3 seconds.
• Turn off the unit.
PLAYBACK
➤ Wireless playback of audio via Bluetooth connection
En
25
NETWORKS
Networks
Network functions and the MusicCast CONTROLLER
app
A network connection allows you to listen to Internet radio stations or music streaming
services, and to use AirPlay to play music files, or to play music files stored on your
computer (media server) via this unit.
Most playback requires the “MusicCast CONTROLLER” app for mobile devices. Install
and use the MusicCast CONTROLLER app on your mobile device to play music files.
Connecting to a network
Choose a wired or wireless network connection based on your network environment.
Wired network connections
To use a wired network connection, connect the unit to a router via an STP network
cable (category 5 or higher straight cable; not supplied).
Proceed from network connection to playback in the following sequence.
Network Attached
Storage (NAS)
Internet
a Choose a wired network connection (p. 26) or a wireless network connection (p.
27).
WAN
b Use the MusicCast CONTROLLER app to connect the unit to a network, and
LAN
Modem
register the unit as a MusicCast-enabled device (p. 27).
PC
c Use the MusicCast CONTROLLER app to play music over a network* (p. 39 to
Network cable
Router
42).
* AirPlay can be used to play music files without using the MusicCast CONTROLLER
app.
Mobile device
NOTE
• To use network function, the unit, your PC and mobile device must be connected to the same router. Make
sure whether the network parameters (such as the IP address) are properly assigned to the unit in
“Information” (p. 47) in the setup menu.
• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to
connect. Connect the unit and mobile device to the same SSID.
• Some security software installed on your computer, or network device settings (such as a firewall), may
block the unit’s access to your computer or Internet radio stations. Should this occur, change security
software and/or network device settings.
• A network connection cannot be established if the MAC address filter on your router is enabled. Check
your router’s settings.
• To configure your router’s subnet mask manually, apply the same subnet used by this unit to all devices.
• Use of a broadband connection is recommended when using Internet services.
NETWORK
HINT
• If the unit is already connected to a wireless network and you would like to switch to a wired connection,
change “Network” in the setup menu to “Wired”.
HINT
• If your router supports DHCP, network settings for the unit need not be configured. Network parameters
(such as the IP address) will be assigned automatically. If your router does not support DHCP, or if you
prefer to configure network parameters manually, you must configure network settings yourself (p. 48).
NETWORKS
➤ Network functions and the MusicCast CONTROLLER app
En
26
Wireless network connections
Connect the unit to a wireless router (access point) to use a network.
Refer to the following for instructions on connecting to a wireless router (access point).
• Using the MusicCast CONTROLLER app (p. 27)
• Using connection methods other than the MusicCast CONTROLLER app (p. 30 to 36)
Connecting with the MusicCast CONTROLLER app
(registering the unit as a MusicCast-enabled device)
Install the MusicCast CONTROLLER app on your mobile device to connect the unit to a
network and register it as a MusicCast-enabled device.
HINT
• Confirm that your mobile device is connected to your home router before beginning.
• This section uses MusicCast CONTROLLER app screens displayed in English on an iPhone as examples.
• MusicCast CONTROLLER app screens and menu labels are subject to change without prior notice.
Internet
Wireless router (access point)
1
Install the MusicCast CONTROLLER app on your mobile device, and
open the app.
Search for “MusicCast CONTROLLER” on the App Store or Google Play.
Modem
2
Tap “Setup”.
Mobile device
The
indicator on the unit glows when the unit is connected to a wireless network.
Green
NOTE
• You cannot use the wireless network connection simultaneously with the wired network connection or
Wireless Direct (p. 37).
• If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless
router (access point). In such case, place them close to each other.
HINT
• If the unit will not be connected to a wireless router (access point), Wireless Direct (p. 37) can be used to
connect the unit directly to a mobile device to control the unit using the MusicCast CONTROLLER app
installed on that mobile device.
NETWORKS ➤ Connecting to a network
En
27
3
5
Turn on the unit, and then tap “Next”.
Follow the on-screen instructions to configure network settings.
HINT
• When a screen like that below is displayed, follow the on-screen instructions to configure network
settings.
1. Use the Home button on your mobile device to return
to the Home screen.
2. Select “Wi-Fi” from “Settings”.
3. Select “MusicCastSetup” from “CHOOSE A
NETWORK...”.
4. Use the Home button to return to the MusicCast
CONTROLLER app.
4
Hold down the CONNECT key on the unit until the
the unit starts flashing.
indicator on
• When a screen like that at left below is displayed, select the network to which the unit will be
connected and enter the router’s password (encryption key).
The router’s password (encryption key) is often noted on the router itself. Refer to documentation
supplied with the router for details.
NETWORKS ➤ Connecting to a network
En
28
6
To register the unit as a MusicCast-enabled device, configure the
following items.
• Location name (“home”, “John’s house”, etc.)
• Name and photo of the room where the unit is installed
The location name, and the name and photo of the room where the unit is installed
can be changed later.
HINT
• If a different MusicCast-enabled device is already registered with the MusicCast CONTROLLER app, tap
(Setup) in the room selection screen, and then select “Add New Device” to add the unit to the app.
Tap
Network connection with the MusicCast CONTROLLER app is now complete, and the
unit has been registered as a MusicCast-enabled device.
NETWORKS ➤ Connecting to a network
En
29
Using connection methods other than the
MusicCast CONTROLLER app (wireless
network)
Use the setup menu on the unit to connect to a wireless network
without using the MusicCast CONTROLLER app.
• Sharing the iOS device setting (p. 30)
• Using the WPS push button configuration (p. 31)
• Searching for a wireless router (access point) (p. 32)
• Setting up the wireless connection manually (p. 34)
• Using the WPS PIN code (p. 36)
6
7
Use the S/T keys to select “Wireless (Wi-Fi)”, and
press the ENTER key.
Use the S/T keys to select “Share Wi-Fi Settings”,
and press the ENTER key.
NOTE
/
ENTER
• Once the unit has been connected to a wireless network using any of the methods
described above, network settings will change when connection to a wireless
network is established with the MusicCast CONTROLLER app.
• AirPlay is the only network function that can be used without the MusicCast
CONTROLLER app.
RETURN
SETUP
Sharing the iOS device setting
You can easily setup a wireless connection by applying the
connection settings on iOS devices (such as an iPhone).
Before proceeding, confirm that your iOS device is connected to a
wireless router (access point).
NOTE
• You need iOS device with iOS 7 or later.
• The connection settings on iOS devices cannot be applied to the unit to establish
a wireless connection if your wireless router (access point) uses WEP encryption.
See “Searching for a wireless router (access point)” (p. 32) to establish a
connection.
1
2
3
8
When the following screen is displayed, press the
ENTER key.
Press the z key to turn on this unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 16).
Press the SETUP key.
The setup menu is displayed on the TV screen.
4
5
Use the S/T keys to select “Network”, and press
the ENTER key.
Use the S/T keys to select “Network Connection”,
and press the ENTER key.
HINT
• The settings to be deleted (initialized) will be displayed. If you do not want to
delete these settings, press the RETURN key to terminate the connection.
NETWORKS ➤ Connecting to a network
En
30
9
When the following screen is displayed, press the
ENTER key.
Using the WPS push button configuration
A wireless connection can be established by pressing WPS button
on the wireless router (access point).
1
2
3
Press the z key to turn on this unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 16).
Press the SETUP key.
The setup menu is displayed on the TV screen.
4
/
ENTER
SETUP
10 Display the Wi-Fi setup screen on the iOS device
and select the unit from “SETUP A NEW AIRPLAY
SPEAKER...”.
Follow the on-screen instructions displayed on the iOS device.
5
6
7
Use the S/T keys to select “Network”, and then
press the ENTER key.
Use the S/T keys to select “Network Connection”,
and then press the ENTER key.
Use the S/T keys to select “Wireless (Wi-Fi)”, and
then press the ENTER key.
Use the S/T keys to select “WPS Button”, and then
press the ENTER key.
NETWORKS ➤ Connecting to a network
En
31
8
Push the WPS button on the wireless router (access
point).
When a connection has been established, “Completed” will be
displayed on the TV screen.
If “Not connected” is displayed, press the ENTER key to repeat
the procedure beginning with step 6, or see the information
below to try another connection method.
NOTE
• The WPS button cannot be used to establish a wireless connection if your
wireless router (access point) uses WEP encryption, or if the router’s MAC
address filter is enabled. See “Searching for a wireless router (access
point)” (p. 32) to establish a connection.
• The WPS button cannot be used to establish a wireless connection if your
wireless router (access point) is configured so that it does not broadcast its
SSID. See “Setting up the wireless connection manually” (p. 34) to establish
a connection.
/
ENTER
SETUP
9
Press the SETUP key to exit the setup menu.
Searching for a wireless router (access point)
Find and connect to a nearby wireless router (access point).
1
2
3
Press the z key to turn on this unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 16).
Press the SETUP key.
The setup menu is displayed on the TV screen.
4
5
6
About WPS
WPS (Wi-Fi Protected Setup) is a standard established by the
Wi-Fi Alliance, which allows easy establishment of a wireless
home network.
7
Use the S/T keys to select “Network”, and then
press the ENTER key.
Use the S/T keys to select “Network Connection”,
and then press the ENTER key.
Use the S/T keys to select “Wireless (Wi-Fi)”, and
then press the ENTER key.
Use the S/T keys to select “Access Point Scan”,
and then press the ENTER key.
The list of available access points appears on the TV screen.
NETWORKS ➤ Connecting to a network
En
32
8
Use the S/T keys to select the desired access point
and press the ENTER key.
The wireless connection setting screen appears on the TV.
11 Use the S/T keys to select “Connect” and press
the ENTER key to start the connection process.
When a connection has been established, “Completed” will be
displayed on the TV screen.
If “Not connected” is displayed, press the ENTER key to repeat
the procedure beginning with step 6, or see the information
below to try another connection method.
NOTE
• “Access Point Scan” cannot be used to establish a wireless connection if
your wireless router (access point) is configured so that it does not
broadcast its SSID. See “Setting up the wireless connection manually” (p.
34) to establish a connection.
12 Press the SETUP key to exit the setup menu.
///
ENTER
SETUP
9 Press the ENTER key.
10 Use the W/X/S/T and ENTER keys to enter the
security key.
[]/[]: Move the cursor left and right.
[Space]: Enter a space.
[BKSP]: Delete the character to the left of the selected one.
[DELETE]: Delete the selected character.
[CLEAR]: Delete all characters entered.
[CANCEL]: Cancel character entry, and return to the previous screen.
Once the security key been entered, select “OK”, and then
press the ENTER key. The screen will return to that displayed
in step 8.
NETWORKS ➤ Connecting to a network
En
33
Setting up the wireless connection manually
8
Use the S/T keys to select “SSID”.
Setup the SSID (network name), encryption method and security
key for your network manually.
1
2
3
Press the z key to turn on this unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 16).
Press the SETUP key.
The setup menu is displayed on the TV screen.
4
///
ENTER
RETURN
SETUP
5
6
7
Use the S/T keys to select “Network”, and then
press the ENTER key.
Use the S/T keys to select “Network Connection”,
and then press the ENTER key.
9
Use the W/X/S/T keys and the ENTER key to enter
the SSID of the access point.
Use the S/T keys to select “Wireless (Wi-Fi)”, and
then press the ENTER key.
Use the S/T keys to select “Manual Setting”, and
then press the ENTER key.
[]/[]: Move the cursor left and right.
[Space]: Enter a space.
[BKSP]: Delete the character to the left of the selected one.
[DELETE]: Delete the selected character.
[CLEAR]: Delete all characters entered.
[CANCEL]: Cancel character entry, and return to the previous screen.
Once the security key been entered, select “OK”, and then
press the ENTER key. The screen will return to that displayed
in step 8.
NETWORKS ➤ Connecting to a network
En
34
10 Use the S/T keys to select “Security” and the W/X
13 Use the S/T keys to select “Connect” and press
keys to select the encryption method.
the ENTER key to start the connection process.
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
When a connection has been established, “Completed” will be
displayed on the TV screen.
If “Not connected” is displayed, press the ENTER key to repeat
the procedure beginning with step 6.
NOTE
• As communications are not encrypted when “None” is selected, selecting
this option poses the risk that third parties may access the unit without your
permission.
14 Press the SETUP key to exit the setup menu.
11 Use the S/T keys to select “Security Key” and
press the ENTER key.
HINT
• If you select “None” in step 10, this item is not available.
12 Use the W/X/S/T and ENTER keys to enter the
///
ENTER
SETUP
security key.
If you select “WEP” in step 10, enter either 5 or 13 character
string, or 10 or 26 hexadecimal (base 16) keys.
If you select the method other than “WEP”, enter either 8 to 63
character string, or 64 hexadecimal (base 16) keys.
HINT
• Hexadecimal (base 16) keys use combinations of the numbers 0 through 9
and the letters a through f. Letters are not case sensitive.
[]/[]: Move the cursor left and right.
[Space]: Enter a space.
[BKSP]: Delete the character to the left of the selected one.
[DELETE]: Delete the selected character.
[CLEAR]: Delete all characters entered.
[CANCEL]: Cancel character entry, and return to the previous screen.
Once the security key been entered, select “OK”, and then
press the ENTER key. The screen will return to that displayed
in step 8.
NETWORKS ➤ Connecting to a network
En
35
Using the WPS PIN code
8
Register the unit’s PIN code with your wireless router (access point)
to establish a connection. This procedure applies if your wireless
router (access point) supports the WPS PIN feature.
1
2
3
Use the S/T keys to select the desired access point
and press the ENTER key.
The PIN code of the unit appears on the TV screen.
Press the z key to turn on this unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 16).
Press the SETUP key.
The setup menu is displayed on the TV screen.
4
/
ENTER
SETUP
5
6
Use the S/T keys to select “Network”, and then
press the ENTER key.
Use the S/T keys to select “Network Connection”,
and then press the ENTER key.
Use the S/T keys to select “Wireless (Wi-Fi)”, and
then press the ENTER key.
9
Enter the unit’s PIN code into the wireless router
(access point).
For details on settings, refer to documentation supplied with the
wireless router (access point).
10 Press the ENTER key to start the connection
process.
7
Use the S/T keys to select “PIN Code”, and then
press the ENTER key.
When a connection has been established, “Completed” will be
displayed on the TV screen.
If “Not connected” is displayed, press the ENTER key to repeat
the procedure beginning with step 6, or see the information
below to try another connection method.
NOTE
• The PIN code cannot be used to establish a wireless connection if your
wireless router (access point) uses WEP encryption, or if the router’s MAC
address filter is enabled. See “Searching for a wireless router (access
point)” (p. 32) to establish a connection.
11 Press the SETUP key to exit the setup menu.
The list of available access points appears on the TV screen.
NETWORKS ➤ Connecting to a network
En
36
Connecting a mobile device to the unit
directly (Wireless Direct)
Connect a mobile device directly to the unit without using a wireless
router (access point).
Wireless Direct supports the following.
− Operation of the unit using a mobile device to which the dedicated
MusicCast CONTROLLER app has been installed.
− Use of AirPlay to play music files stored on an iOS device.
6
7
Use the S/T keys to select “Wireless Direct”, and
then press the ENTER key.
Use the S/T keys to select “Security” and the W/X
keys to select the encryption method.
Settings
None, WPA2-PSK (AES)
In most cases, “WPA2-PSK (AES)” should be selected. If your
mobile device does not support “WPA2-PSK (AES)”, select
“None”.
///
ENTER
NOTE
Mobile device
• As communications are not encrypted when “None” is selected, selecting
this option poses the risk that third parties may access the unit without your
permission.
SETUP
NOTE
• You cannot use Wireless Direct simultaneously with the wired network connection
(p. 26) or the wireless network connection (p. 27).
• When Wireless Direct is enabled, the mobile device and the unit cannot connect
to the Internet. Therefore, you cannot use any kind of Internet service such as
Internet radio.
1
2
3
8
Use the S/T keys to select “Security Key” and
press the ENTER key.
HINT
• If you select “None” in step 7, this item is not available.
Press the z key to turn on this unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 16).
Press the SETUP key.
The setup menu is displayed on the TV screen.
4
5
Use the S/T keys to select “Network”, and then
press the ENTER key.
Use the S/T keys to select “Network Connection”,
and then press the ENTER key.
NETWORKS ➤ Connecting to a network
En
37
9
Use the W/X/S/T and ENTER keys to enter the
security key.
Enter either 8 to 63 character string, or 64 hexadecimal (base
16) keys.
HINT
• Hexadecimal (base 16) keys use combinations of the numbers 0 through 9
and the letters a through f. Letters are not case sensitive.
10 Use the S/T keys to select “Save” and press the
ENTER key to save the setting.
This completes the settings and “Set the mobile device.” will be
displayed on the TV screen. The unit functions as an access
point.
Next, configure the Wi-Fi settings of a mobile device.
11 Configure the Wi-Fi settings of a mobile device.
For details on settings of your mobile device, refer to
documentation supplied with the mobile device.
1 Enable the Wi-Fi function on the mobile device.
2 Select the SSID displayed in step 9 from the list of available
access points.
3 When you are prompted for a password, enter the security
key displayed in step 9.
12 Press the SETUP key to exit the setup menu.
///
ENTER
SETUP
[]/[]: Moves the cursor left and right.
[Space]: Enter a space.
[BKSP]: Delete the character to the left of the selected one.
[DELETE]: Delete the selected character.
[CLEAR]: Delete all characters entered.
[CANCEL]: Cancel character entry, and return to the previous screen.
Once the security key been entered, select “OK”, and then
press the ENTER key. The screen below will be displayed.
HINT
• Before proceeding to the next step, record the following information. These
information will be needed to configure the Wi-Fi setting of a mobile device.
− SSID displayed on the TV screen
− Security key you have just entered
NETWORKS ➤ Connecting to a network
En
38
Playing back music stored on media servers (PCs/
NAS)
You can play back music files stored on your PC or DLNA-compatible NAS via the unit.
NOTE
• The audio may be interrupted while using the wireless network connection. In this case, use the wired
network connection.
1
2
3
4
5
Start Windows Media Player 12 on your PC.
Select “Stream”, then “Turn on media streaming”.
Click “Turn on media streaming”.
Select “Allowed” from the drop-down list next to the unit’s model
name.
Click “OK” to exit.
Supported File formats
The number of
channels
For a PC or a NAS with other DLNA server software installed
File
Sampling frequency (kHz)
Gapless playback
WAV*
32 to 192
2
✓
MP3
8 to 48
2
—
WMA
8 to 48
2
—
MPEG-4 AAC
8 to 48
2
—
FLAC
32 to 192
2
✓
ALAC
32 to 96
2
✓
AIFF
32 to 192
2
✓
* Linear PCM format only
Refer to documentation supplied with the device or software and configure the media
sharing settings.
Playing music files
Use the MusicCast CONTROLLER app (p. 27) installed on your mobile device to play
music files.
NOTE
• Register the unit as a MusicCast-enabled device (p. 27) before playing music files.
1
NOTE
• To play back FLAC files stored on a PC or NAS, you need to install server software that supports sharing of
FLAC files via DLNA on your PC or use a NAS that supports FLAC files.
• Digital Rights Management (DRM) contents cannot be played back.
Media sharing setup
To play back music files stored on your PC or DLNA-compatible NAS, first you need to
configure the media sharing setting on each music server.
2
3
Use the MusicCast CONTROLLER app to select the unit’s room
(Room1, etc.).
Tap
(Server).
Follow the on-screen instructions to select a song.
HINT
• When a music file is registered with No. 1, 2, or 3 in “Favorites” with the MusicCast CONTROLLER app, the
registered music file can be played with the NET RADIO 1, 2, or 3 key on the remote control.
For a PC with Windows Media Player installed
This unit supports Windows Media Player 11 or later. This section explains Windows
Media Player 12 setup as an example.
NOTE
• Operation may vary depending upon your PC or settings. Refer to documentation provided by your PC’s
manufacturer or Windows Media Player Help for details.
NETWORKS
➤ Playing back music stored on media servers (PCs/NAS)
En
39
Listening to Internet radio
You can listen to Internet radio stations from all over the world.
NOTE
Using the MusicCast CONTROLLER app to bookmark a station
1
2
Select the desired Internet radio station.
Tap
in the playback screen, and then tap “Add Bookmark”.
• You may not be able to receive some Internet radio stations.
• The unit uses the vTuner Internet radio station database service. This service may be discontinued without
notice.
Playback of Internet radio
Use the MusicCast CONTROLLER app (p. 27) installed on your mobile device to select
an Internet radio station.
NOTE
• Register the unit as a MusicCast-enabled device (p. 27) before listening to Internet radio.
1
2
3
Tap
Use the MusicCast CONTROLLER app to select the unit’s room
(Room1, etc.).
Tap
(Net Radio).
Select a station from “Locations”, “Genres”, etc.
HINT
HINT
• You can use the Web browser on your PC to access the vTuner website (http://yradio.vtuner.com/)
and edit bookmarks.
• When the vTuner website is accessed, a dialog in which the unit’s vTuner ID can be entered is
displayed. Confirm the unit’s vTuner ID from “Network” of “Information” in the setup menu beforehand
(p. 47)
• When an Internet radio station is registered with No. 1, 2, or 3 in “Favorites” with the MusicCast
CONTROLLER app, the registered Internet radio station can be played with the NET RADIO 1, 2, or 3 key
on the remote control.
Tuning into registered Internet radio stations
1
Tap “Bookmarks”, and then tap “My_Favorites” to select the desired
Internet radio station.
NETWORKS ➤
Listening to Internet radio
En
40
Playing back music with AirPlay
The AirPlay function allows you to play back iTunes or iPod music on the unit via
network.
HINT
HINT
• When the unit is turned on for the first time after purchase, the
indicator flashes slowly and the “Share
Wi-Fi Settings” screen is displayed on the TV. While the
indicator is flashing and the screen is
displayed, network settings from your iOS device (an iPhone, etc.) can be applied to the unit to connect the
unit to a wireless network.
The
indicator does not flash and the screen is not displayed if the unit’s NETWORK jack is connected
to a router using a cable (wired connection).
• This section describes “iPod touch”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod touch”,
“iPhone” and “iPad”, unless otherwise specified.
iTunes
Display Wi-Fi settings on the iOS device and select the unit from “SETUP A NEW AIRPLAY SPEAKER...”.
Example
Router
(wired or
wireless)
PC
(wired or wireless)
Name of the unit
When the following screen is displayed, select the network (access point) to which the unit will be
connected.
iPod
Example
NOTE
Tap to connect to the selected
network
• AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or
later, and Mac and PC with iTunes 10.2.2 or later.
Name of the selected network
Name of the unit
NOTE
• If the unit is connected to a network using the MusicCast CONTROLLER app (p. 27), network settings will
be changed to those of the MusicCast CONTROLLER app.
NETWORKS ➤
Playing back music with AirPlay
En
41
Playback of iTunes/iPod music contents
Playing back music stored on mobile devices
Follow the procedure below to play back iTunes/iPod music contents on the unit.
1
Use this function to play music stored on your mobile device over a network.
Turn on the unit, and start iTunes on the PC or display the playback
screen on the iPod.
If the iTunes/iPod recognizes the unit, the AirPlay icon (
Router
) appears.
iPod (example)
iTunes (example)
(wired or wireless)
NOTE
• If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly.
2
On the iTunes/iPod, click (tap) the AirPlay icon and select the unit as
the audio output device.
Mobile device
iTunes (example)
iPod (example)
iPod touch
YAS-706
Use the MusicCast CONTROLLER app (p. 27) installed on your mobile device to
operate playback.
YAS-706
The unit
3
Using a mobile device to play songs
NOTE
• Register the unit as a MusicCast-enabled device (p. 27) before playing music files.
Select a song and start playback.
To operate playback, use the Music app on the iPod or iTunes on the PC.
HINT
• When the network standby function (p. 49) is enabled, the unit automatically turns on when iTunes/
iPod playback begins.
• You can adjust the unit’s volume from the iTunes/iPod during playback.
Caution
When you use iTunes/iPod controls to adjust volume, the volume may be unexpectedly loud. This could
result in damage to the unit or speakers. If the volume suddenly increases during playback, stop playback
on the iTunes/iPod immediately.
1
2
3
Use the MusicCast CONTROLLER app to select the unit’s room
(Room1, etc.).
Tap
.
Select a song from “Playlists”, “Artists”, etc.
Caution
When you use mobile device controls to adjust volume, the volume may be unexpectedly loud. This could
result in damage to the unit or speakers. If the volume suddenly increases during playback, stop playback
on the mobile device immediately.
NETWORKS
➤ Playing back music stored on mobile devices
En
42
SETTINGS
Settings
Setup menu
A variety of settings for this unit can be specified and adjusted from
the setup menu. Among the options available are the sound beam
output method for optimal surround sound effects, channel volume
control, and HDMI settings.
The setup menu is displayed on, and operated from, the TV screen.
See “Displaying the menu screen on the TV” (p. 16) for instructions
on displaying the setup menu on the TV.
2
Press the S/T key to select a menu and then press
the ENTER key or X key.
Repeat these steps to display the desired menu.
Setting the setup menu
///
ENTER
RETURN
1
Press the SETUP key.
SETUP
Press the W key or RETURN key to return to the previous
menu.
3
NOTE
• Hold down the SETUP key to display “OSD Language” directly on the
screen (p. 17, 49).
• If an update for the unit’s firmware is available, an envelope icon ( ) will be
displayed in the setup menu (p. 52).
4
Press the S/T key to change the setting value of
each menu.
Press the SETUP key again to exit the setup menu.
SETTINGS ➤ Setup menu
En
43
Setup menu list
Menu
Sound
Settings
45
Audio Delay
Specify audio output timing.
45
Audio Delay (LINK)
Audio Sync, Lip Sync
Specify audio output timing when distributing sound from the unit to other
MusicCast-enabled devices.
45
Bass Out
Specify whether the subwoofer will be connected via a wired or wireless
connection.
45
Pairing
Manually pair the center unit with the subwoofer.
45
HDMI Control
Turn HDMI control on or off.
46
HDMI Audio Out
Choose whether HDMI audio input is played via this unit or the TV.
46
Bluetooth
Enable/disable the Bluetooth functions.
46
Transmission
Turn the function that transmits audio to a Bluetooth device, such as Bluetooth
speakers, on or off.
46
Device Search
Search for the Bluetooth device, such as Bluetooth speakers, to which audio
will be transmitted.
46
MAC Address
Display the MAC address for the Bluetooth connection.
46
Information
Display the unit’s network information.
47
Network Connection
Select the network connection method.
47
Bluetooth
IP Address
DHCP, IP Address, Subnet Mask, Default
Gateway, DNS Server (P), DNS Server (S)
Configure the network parameters (such as IP address).
48
MAC Address Filter
Filter, MAC Address 1–10
Set the MAC address filter to limit access to the unit from other network
devices.
48
Enable/disable the function that turns on the unit from other network devices.
49
Perform Update
Update the firmware via the network.
49
Dimmer
Adjust the brightness of the indicators.
49
OSD Language
Changes the language used for menus displayed on the TV screen.
49
Auto Power Standby
Enable/disable the function that turns off the unit automatically.
50
Audio
Display audio input signal information.
50
Video
Display video input signal information.
50
System
Display this unit’s firmware version.
50
Network
Network Standby
Network Update
Function
Information
Page
Specify dynamic range.
Subwoofer
HDMI
Function
Dynamic Range
SETTINGS ➤ Setup menu
En
44
Sound
Audio Delay (LINK)
Setup Menu
Dynamic Range
Setup Menu
➜
Sound
➜
Dynamic Range
Adjust this unit’s dynamic range (difference between maximum and minimum volumes).
Min: Sets dynamic range at a level that supports comfortable listening at
low volumes.
Auto: Sets dynamic range in accordance with information received from
input signal.
Standard
The dynamic range recommended for regular home use.
Max (default)
Outputs sound without adjusting the dynamic range of the input signals.
Audio Delay
Setup Menu
Audio Delay (LINK)
Specify whether or not the unit’s sound output timing is synchronized with other
MusicCast-enabled devices when sound is distributed from this unit to other MusicCastenabled devices.
NOTE
Settings
Audio Sync
(default)
Output timing is synchronized with other MusicCast-enabled devices (to
which sound from this unit is distributed).
Lip Sync
Output timing is adjusted in accordance with the “Audio Delay” setting (p.
45). Select this option if you notice a deviation in timing between audio and
video playing on a TV or BD/DVD player.
Subwoofer
➜
Sound
➜
Audio Delay
TV images sometimes lag behind the sound. You can use this function to delay the
sound output to synchronize it with the video image.
Setup Menu
➜
➜
Sound
Subwoofer
Apply subwoofer settings, such as the connection method.
• Bass Out
NOTE
• “Audio Delay” is not available when all of the following conditions are met.
− “Audio Delay (LINK)” (p. 45) is set to “Audio Sync”.
− Sound (an input source other than BLUETOOTH or NET) is distributed from this unit to other MusicCastenabled devices.
− “Link Control” is set to “Standard (default)” or “Speed Boost” with the MusicCast CONTROLLER app.
Specify how the subwoofer is connected.
Settings
Wireless
(default)
Select to connect the center unit and subwoofer wirelessly.
Wired
Select to connect the center unit and subwoofer via the subwoofer cable
(RCA mono cable) and system control cable (3.5 mm monaural mini plug
cable).
Adjustable range
HDMI1, 2, TV,
COAXIAL,
ANALOG
➜
Sound
• This setting can only be configured when “Link Control” is set to “Standard (default)” or “Speed Boost” with
the MusicCast CONTROLLER app.
Settings
Min/Auto
➜
Auto* (default), 0 ms to 500 ms, 5 ms increments
* When “Auto” is selected, output timing is automatically adjusted. This setting is only
available when the TV connected via HDMI cable supports the audio delay automatic
adjustment feature.
• Pairing
Manually pair the center unit with the subwoofer.
After “Pairing” is selected, press the SUBWOOFER PAIRING button on the subwoofer
for three seconds. For details, refer to “Pairing the center unit and subwoofer” (p. 62).
HINT
• “Pairing” can be selected when “Bass Out” is set to “Wireless”.
SETTINGS ➤ Setup menu
En
45
HDMI
Bluetooth
Use to configure the settings related to HDMI signals and the HDMI control function.
Configures the Bluetooth settings.
HDMI Control
Bluetooth
➜
Setup Menu
HDMI
➜
HDMI Control
Setup Menu
➜
Bluetooth
Turn HDMI control function (p. 22) on or off.
Enables/disables the Bluetooth function.
Settings
Settings
Off
Disable the control function. The standby power consumption of this unit
decreases.
On (default)
Enable the control function.
Off
Disable the Bluetooth function.
On (default)
Enable the Bluetooth function.
➜
Bluetooth
➜
Transmission
HINT
• Set the HDMI control function to “On” when a TV that supports audio return channel (ARC) is used (p. 12),
or when using the HDMI signal pass-through function (p. 13).
Transmission
Setup Menu
HDMI Audio Out
This setting can be configured only when “HDMI Control” is set to “Off”.
Setup Menu
➜
HDMI
➜
HDMI Audio Out
Use to select a device to play HDMI audio input signal.
➜
Bluetooth
Transmit audio from the unit to Bluetooth speakers or headphones.
Settings
Off (default)
Audio can not be transmitted.
On
Audio input to the unit can be transmitted to Bluetooth speakers or
headphones.
Settings
AMP (default)
Play HDMI audio input signal from the unit.
TV
Play HDMI audio input signal from the TV connected to the HDMI OUT
(ARC) jack on the unit. The unit cannot be used to adjust volume.
HINT
• When “HDMI Control” is set to “On”, select the audio output device based on the settings configured for the
TV connected to this unit.
• HDMI video signals input to one of the HDMI IN jacks of this unit are always output from the HDMI OUT
(ARC) jack of this unit.
Device Search
Setup Menu
➜
➜
Bluetooth
Device Search
Select the Bluetooth speakers or headphones to which audio will be transmitted, and
connect the unit to the speakers or headphones wirelessly.
MAC Address
Setup Menu
➜
➜
Bluetooth
MAC Address
Display the MAC address for the Bluetooth connection.
SETTINGS ➤ Setup menu
En
46
Network
Network Connection
Configures the network settings.
Setup Menu
Network
➜
Network Connection
Select the network connection method.
Information
Setup Menu
➜
➜
Network
➜
Settings
Information
Wired
Select this option when connecting the unit to a network with a
network cable (not supplied).
HINT
Wireless (Wi-Fi)
Select this option when connecting the unit to a network via the
wireless router (access point).
• The options displayed vary according to the type of network connection (Wired/Wireless (Wi-Fi)/Wireless
Direct).
Wireless Direct
Select this option when connecting a mobile device to the unit
directly.
Display the network information on the unit.
Status
The connection status of the NETWORK jack
Connection
Connection method
MC Network
The connection status of MusicCast Network
SSID
The access point to which the unit is connected
Security
The encryption method for your network
MAC Address
MAC address (Ethernet/Wi-Fi)
IP Address
IP address
Subnet Mask
Subnet mask
Default Gateway
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
DNS Server (S)
The IP address of the secondary DNS server
vTuner ID
The ID of the Internet radio (vTuner)
SETTINGS ➤ Setup menu
En
47
IP Address
MAC Address Filter
➜
Setup Menu
Network
➜
IP Address
Configure the network parameters (such as IP address).
Setup Menu
➜
➜
Network
MAC Address Filter
• DHCP
The MAC address filter limits network devices that can be used to operate the unit.
When operating the unit via an app on a mobile device, specify the MAC address of the
device.
Select whether to use a DHCP server.
HINT
• Operation of the AirPlay function (p. 41) or DLNA-compatible device (p. 39) is not limited by this setting.
Settings
Off
The DHCP server is not used. Configure the network parameters
manually. For details, see “Manual network settings”.
On (default)
The DHCP server is used to automatically obtain the unit’s network
parameters (such as IP address).
Manual network settings
1
2
3
4
• Filter
Enable/disable the MAC address filter.
Settings
Off (default)
Disable the MAC address filter.
On
Enable the MAC address filter. In “MAC Address 1–10”, specify the
MAC addresses of the network devices that will operate the unit.
Set “DHCP” to “Off”.
Use the S/T keys to select a parameter type.
IP Address
Specify an IP address.
Subnet Mask
Specify a subnet mask.
Default Gateway
Specify the IP address of the default gateway.
DNS Server (P)
Specify the IP address of the primary DNS server.
DNS Server (S)
Specify the IP address of the secondary DNS server.
Use the W/X keys to move the edit position and the S/T keys to
select a value.
• MAC Address 1–10
Specify the MAC addresses (up to 10) of the network devices that will operate the unit
when “Filter” is set to “On”.
1
2
3
Use the S/T keys to select an MAC address number (1 to 10).
Use the W/X keys to move the edit position and the S/T keys to
select a value.
Press the ENTER key.
Press the ENTER key.
SETTINGS ➤ Setup menu
En
48
Function
Network Standby
➜
Setup Menu
Network
➜
Network Standby
Turn the function that controls the unit’s power (Network Standby) when a mobile device
or Bluetooth device is operated on or off.
On (default)
➜
Setup Menu
Function
➜
Dimmer
Adjust the brightness of the indicators. The smaller the value, the dimmer the indicators.
Settings
Off
Dimmer
Disable the network standby function.
Enable the network
standby function.
• When the unit is turned off, it will turn on with the
following playback operations.
− Play back with AirPlay
− Music files stored on a DLNA-compliant network
attached storage (NAS) unit are played
• The unit can also be turned on and off using the
MusicCast CONTROLLER app installed on your
mobile device.
When a Bluetooth device is connected to this unit while
it is off, this unit turns on.
Settings
-2 (off), -1 (dim; default), 0 (bright)
HINT
• Indicators glow brightly just after operation and change to the specified brightness after a few seconds.
OSD Language
Setup Menu
➜
Function
➜
OSD Language
Use to select the language used for menus displayed on the TV screen.
HINT
• The unit consumes more power when it is off with the network standby function enabled than it does when
it is off with this function disabled.
Network Update
Setup Menu
➜
Network
➜
Network Update
Update the firmware via the network.
Settings
ENGLISH
(default)
Menus are displayed in English.
FRANÇAIS
Menus are displayed in French.
ESPAÑOL
Menus are displayed in Spanish.
HINT
• Hold down the SETUP key to display “OSD Language” directly on the TV screen.
• The settings may be changed automatically when using the TV which supports the HDMI control function.
Perform Update
This option is available after a new firmware has been released. For details, see
“Updating the unit’s firmware” (p. 52).
SETTINGS ➤ Setup menu
En
49
Information
Auto Power Standby
➜
Setup Menu
➜
Function
Auto Power Standby
Enabling the auto power standby function prevents the unit from remaining on when not
in use.
Disable the auto power standby function.
Enable the auto
power standby
function.
On
The unit automatically turns off in any of the
following situations.
− No operations for 8 hours
− No audio input and no operations for 20
minutes when HDMI 1-2, BLUETOOTH or
NET is selected as the input source.
The auto power standby function can also be configured without using the setup
menu. Follow the procedure below.
1
2
Audio
Setup Menu
Settings
Off (default)
Display information for the audio and video signal input to this unit.
Turn off the unit.
Hold down the
key and press the
key on the unit.
➜
➜
Information
Audio
The following information on the current audio input signal is displayed.
Format
Digital audio format
Number of channels
The number of channels contained within the input signal—front/
surround/low field effects (LFE).
Example: “3/2/0.1” means signal contains 3 front channels, 2
surround channels, and LFE.
If the signal contains channels other than front, surround, and LFE,
the total number of channels may be displayed. Example: “5.1ch”
Sampling frequency
The sampling frequency of the digital input signal
Bit rate
The per-second bit rate of the input signal
HINT
• The audio bit rate may not be displayed for some input signals.
Video
CONNECT
The auto power standby function is enabled or disabled, and the unit turns on. For several
seconds immediately after the unit is turned on, the indicator shows auto power standby
function status.
Setup Menu
➜
Information
➜
Video
The following information on the current video input signal is displayed.
Off (enabled), glows (disabled)
Type
HDMI or DVI
Resolution
Video signal resolution
System
Setup Menu
➜
Information
➜
System
Display the version of firmware currently installed on this unit.
SETTINGS ➤ Setup menu
En
50
Configuring 4K video mode
When playing 4K video, select Mode 1 or Mode 2 according to the video signal format.
Mode 1*
4K (60 Hz/50 Hz) signals are input and output in 4:4:4, 4:2:2, or 4:2:0
format.
Depending upon the device connected or the HDMI cable used, video may
not be displayed correctly. Should this occur, select Mode 2.
Mode 2
(default)
4K (60 Hz/50 Hz) signals are input and output in 4:2:0 format.
* When Mode 1 is selected, use a high-speed HDMI cable that supports bandwidth of
18 Gbps.
1
2
Turn off the unit.
Hold down the CONNECT key and press the
key on the unit.
CONNECT
The selected 4K video mode (Mode 1 or Mode 2) is enabled, and the unit turns on.
The indicator shows that Mode 1 or Mode 2 has been enabled for several seconds
immediately after the unit turns on.
Off (Mode 1), glows (Mode 2)
SETTINGS ➤
Configuring 4K video mode
En
51
Updating the unit’s firmware
/
ENTER
RETURN
SETUP
HINT
• To update the firmware later, press the RETURN key when the “Network Update”
screen is displayed on the TV screen.
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected to
the Internet, you can download the firmware via the network and
update it.
1
2
The unit’s firmware can be updated as follows.
• Update firmware from “Network Update” in the setup menu. To
perform the procedure, your TV must be connected to the unit via
HDMI.
• Update firmware using the dedicated MusicCast CONTROLLER
app installed on a mobile device. Follow MusicCast
CONTROLLER guides to operate the app and update the
firmware.
3
4
Use the S/T keys to select “Network”, and then
press the ENTER key.
Use the S/T keys to select “Network Update”, and
then press the ENTER key.
Press the ENTER key.
The TV screen goes black and firmware update begins.
Update progress can be confirmed using the indicators on the
unit.
Cautions
• Do not operate the unit or disconnect the power cable or network cable during
firmware update.
• If the Internet connection speed is slow, or the unit is connected to the wireless
network, network update may not be possible depending on the condition of the
network connection. Should this occur, try again at a later time.
• For details on update, visit the Yamaha website.
Using “Network Update” in the setup
menu to update firmware
Press the SETUP key.
Update progress
If the update is completed successfully, all indicators on the
unit will flash.
5
Press the
When the unit is turned on for the first time after a new version of the
unit’s firmware has been released, a message indicating that a
firmware update is available will be displayed on the TV screen.
key on the unit.
CONNECT
Network Update
The firmware update is complete.
New firmware available.
You can start the update from
the “Setup Menu” .
It takes about 20 min. to
update firmware.
NOTE
• If the firmware update fails, the indicator at far right on the unit will flash blue.
Press the
key to turn unit off and then on again, and repeat the procedure from
step 1 again. If the update fails again, check the network connection.
[SETUP] : Setup Menu
[RETURN] : Cancel
SETTINGS ➤ Updating the unit’s firmware
En
52
Updating firmware with connection of a USB flash
drive
Initializing the unit
Follow the procedure below to initialize the unit.
Download the latest firmware version from the Yamaha website to a USB flash drive,
which can then be used to update the unit’s firmware.
See information provided when updating firmware for details.
1
2
3
4
Save this unit’s firmware to a USB flash drive.
1
2
Turn off the unit.
Hold down the
indicators flash.
key and press the
key on the unit until all
Turn off the unit.
Connect the USB flash drive to the UPDATE ONLY jack on the unit’s
rear panel.
Hold down the
key and press the
CONNECT
key.
Initialized
CONNECT
The firmware update begin.
Update progress can be confirmed using the indicators on the unit.
Update progress
If the update is completed successfully, all indicators on the unit will flash.
5
Press the
key on the unit.
CONNECT
The firmware update is complete.
NOTE
• If the firmware update fails, the indicator at far right on the unit will flash blue. Press the
key to turn unit
off and then on again, and repeat the procedure from step 1 again. If the firmware update fails again,
confirm the USB flash drive is correctly connected to the UPDATE ONLY jack.
SETTINGS ➤ Initializing the unit
En
53
APPENDIX
Troubleshooting
Refer to the table below when the unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit,
disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center.
First, check the following:
1 The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets securely.
2 The unit, TV and playback devices (such as BD/DVD players) are turned on.
3 The connectors of each cable are securely inserted into jacks on each device.
Power and system
Problem
Cause
Remedy
When the auto power standby function is enabled, the unit
automatically turns off in any of the following situations:
- No operations have been performed for 8 hours
- HDMI 1–2, BLUETOOTH, or NET is selected as the input source, but
no audio has been input to the unit or no operations have been
performed with the unit for more than 20 minutes.
Turn on the unit again. If the auto power standby function is not used, disable
the function (p. 50).
The protection circuitry has been activated. (The STATUS indicator on
the center unit flashes.)
After confirming that all connections are made properly, turn on the unit again.
If the power still turns off frequently, unplug the power cable from the AC wall
outlet and contact the nearest authorized Yamaha dealer or service center.
The power cannot be turned on.
The protection circuitry has been activated three times consecutively.
(If you try to turn on the power in this condition, the STATUS indicator
on the center unit will flash.)
To protect the product, the power cannot be turned on. Unplug the power
cable from the AC wall outlet and contact the nearest authorized Yamaha
dealer or service center.
All indicators go out although the unit is
turned on (it may seem that the unit is turned
off).
The unit is configured so that indicators do not glow or flash unless the
unit is being operated.
Select the desired brightness from “Dimmer” in the setup menu (p. 49).
The unit does not function correctly.
The internal microcomputer is frozen, due to an external electric shock
(such as lightning or excessive static electricity) or to a drop in the
power supply voltage.
Hold down the
key on the unit for more than 10 seconds to turn on the
unit. (If the problem persists, unplug the power cable from the AC wall outlet
and plug it again.)
The unit turns on by itself.
Another Bluetooth device is being operated nearby.
Terminate Bluetooth connection with the unit (p. 24).
The TV’s 3D glasses do not work.
The unit is blocking the TV’s 3D glasses transmitter.
Confirm the position of the TV’s 3D glasses transmitter, and position the unit
so that it does not obstruct the transmitter.
The power turns off suddenly.
APPENDIX ➤ Troubleshooting
En
54
Audio
Problem
No sound.
Cause
Remedy
Another input source is selected.
Select an appropriate input source (p. 18).
The mute function is activated.
Cancel the mute function (p. 20).
The volume is too low.
Turn up the volume (p. 20).
The power cable of the unit is not connected properly.
Make sure that the power cable of the unit is connected to an AC wall outlet
securely (p. 12).
Input jacks on a playback device are connected.
Connect the input jack on the unit and the output jack on the playback device.
Signals that the unit cannot play back are being input.
Change the digital audio output setting on the playback device to PCM, Dolby
Digital or DTS Digital Surround.
“HDMI Audio Out” is set to “TV”.
Set to “AMP” (p. 46).
“HDMI Control” is set to “Off”.
When connecting ARC (Audio Return Channel) supported TV and this unit
using an HDMI cable only, set “HDMI Control” to “On” (p. 46).
To use this unit with “HDMI Control” set to “Off”, connect the TV’s audio output
jack to this unit’s TV (optical digital) input jack via the optical digital audio
cable (p. 12).
Sound from an HDMI control-enabled TV is set for output from the TV’s
built-in speakers.
Use the TV’s HDMI settings to set audio output to any option other than the
TV’s built-in speakers.
No sound is coming from the subwoofer.
Refer to the “No sound is coming from the subwoofer.” and “The volume of the
subwoofer is low.” problems (p. 56).
The volume decreases when the unit is
turned on.
The automatic volume adjustment function is activated. To prevent
excessive loudness, the unit automatically controls its volume within a
certain level when the unit is turned on.
Turn up the volume as required (p. 20).
No surround effect.
Stereo playback is selected.
Select surround playback (p. 19).
Noise is heard.
The volume is too low.
Turn up the volume (p. 20).
The TV or playback device is set to output 2 channel audio (such as
PCM) only.
Change the digital audio output setting on the TV or playback device to
BitStream.
Sound is also heard from the TV built-in speakers.
Set the TV volume to minimum (p. 12).
The listening position is too close to the unit.
The listening position should be at some distance from the unit.
The unit is too close to another digital or high-frequency device.
Move those devices away from the unit.
APPENDIX ➤ Troubleshooting
En
55
Problem
No sound is coming
from the subwoofer.
Cause
Remedy
Wired/Wireless
The AC power supply cable of the subwoofer is not firmly connected to
the AC wall outlet.
Connect the AC power supply cable firmly to the AC wall outlet.
Wired/Wireless
The volume of the subwoofer is low.
Increase the volume of the subwoofer with the SUBWOOFER + key on the
remote control (p. 20).
Wired/Wireless
The subwoofer’s built-in protective circuit was activated.
(The STATUS indicator on the subwoofer glows orange.)
Disconnect the power cable, and contact your nearest Yamaha dealer or
service center to request repair.
Wired
“Bass Out” of “Subwoofer” is set to “Wireless”.
Set it to “Wired” (p. 45).
Wired
The system control cable (3.5 mm monaural mini plug cable) and
subwoofer cable (RCA mono cable) are not connected firmly.
Connect the cables firmly.
Wireless
Conditions for wireless communications are not good, and the center
unit and the subwoofer are not connected.
(The STATUS indicator on the subwoofer flashes green, or glows red.)
Move the subwoofer closer to the center unit.
If the problem persists, move the subwoofer to a location where its STATUS
indicator steadily glows green.
If there are obstacles such as metal furniture obstructing communications
between the center unit and the subwoofer, rearrange the furniture or
reposition the subwoofer.
If there are devices such as microwave ovens or wireless network devices
that emit electromagnetic waves, move the center unit and the subwoofer
away from these devices.
Use cables to connect the subwoofer to the center unit (p. 15).
The volume of the
subwoofer is low.
Wireless
The center unit is not paired with the subwoofer.
(The STATUS indicator on the subwoofer flashes or grows red.)
Move the subwoofer closer to the center unit to improve conditions for
wireless communications, and pair the two (p. 62).
If the indicator on the subwoofer does not glow green steadily after pairing,
the unit may be malfunctioning. Disconnect the power cable and contact your
nearest Yamaha dealer or service center to request repairs.
Wireless
“Bass Out” of “Subwoofer” is set to “Wired”.
Set to “Wireless” (p. 45).
Wired/Wireless
The volume of the subwoofer is low.
Increase the volume of the subwoofer with the SUBWOOFER + key on the
remote control (p. 20).
Wired/Wireless
Content from an input source with a limited support for low tones is
playing.
Play content from an input source with broader support for low tones to see if
volume is still low.
Wired/Wireless
Sound from the
subwoofer is
intermittent.
Move or reposition the subwoofer (p. 9).
Wired/Wireless
A subwoofer other than that supplied with this unit is connected.
This unit supports the supplied subwoofer NS-WSW121 only.
Wired
Cables used to connect the subwoofer to the center unit are not
connected firmly.
Connect the cables firmly (p. 15).
Wireless
Wireless communication conditions are not good, and the center unit
and the subwoofer are not connected steadily.
Move the subwoofer closer to the center unit.
If the problem persists, move the subwoofer to a location where its STATUS
indicator steadily glows green.
If there are obstacles such as metal furniture obstructing communication
between the center unit and the subwoofer, rearrange the furniture and the
subwoofer.
If there are devices such as microwave ovens or wireless network devices
that emit electromagnetic waves, move the center unit and the subwoofer
away from these devices.
APPENDIX ➤ Troubleshooting
En
56
Audio/Video
Problem
Cause
Remedy
The image is not displayed on TV screen.
The HDMI cable is not securely connected.
Connect the HDMI cable properly (p. 12, 13).
Menu screen of this unit is not displayed.
4K mode is not properly configured.
Select Mode 1 or Mode 2 in accordance with the 4K signal format (p. 51).
A digital or high-frequency equipment
produces noises.
The input switch of TV is not set correctly.
Set the TV’s input source to this unit (p. 16).
The HDMI control function does not work
properly.
The unit may be placed close to digital equipment or high-frequency
equipment.
Move the equipment away from the unit.
“HDMI Control” is set to “Off”.
Set “HDMI Control” to “On” (p. 46).
The HDMI control function is disabled on your TV.
Refer to documentation supplied with your TV and check the setting.
The number of the connected HDMI devices exceeds the limit.
Disconnect some of the HDMI devices.
Amplifiers (AV amplifiers, sound bars, etc.) other than the unit are
connected to the TV or a playback device with an HDMI cable.
Connect only this unit to the TV or a playback device for use as an amplifier.
When the unit is turned off, video and/or
audio from a playback device are not output
to the TV.
“HDMI Control” is set to “Off”.
Set “HDMI Control” to “On” (p. 46).
Audio delay control function is not effective
even “Audio Delay” is set to “Auto”.
The TV does not support the audio delay auto adjustment feature.
Adjust timing of sound output manually from “Audio Delay” in the setup menu
(p. 45).
Remote control
Problem
The unit cannot be operated using the remote
control.
The TV cannot be operated when the TV’s
remote control is pointed toward the unit’s
remote sensor.
Cause
Remedy
The unit is out of the operating range.
Use the remote control within the operating range (p. 3).
The batteries are weak.
Replace with new batteries (p. 3).
The remote control sensor of the unit is exposed to direct sunlight or
strong lighting.
Adjust the lighting angle, or reposition the unit.
The unit and TV are too far apart (or too close), preventing proper
operation of the unit's TV remote repeater function.
Position the unit so that it is more than 5 cm (2 in) away from the TV (p. 10).
There are obstacles between the unit and the TV (cables, etc.),
preventing proper operation of the unit's TV remote repeater function.
Remove obstacles between the unit and the TV.
The TV’s remote control does not use infrared signals.
The unit’s TV remote repeater function cannot be used. Reposition the unit so
that it does not obstruct the remote control sensor on the TV, and point the
TV’s remote control at the remote control sensor on the TV to control the TV.
Signals transmitted from the TV’s remote control and the unit's TV
remote repeater interfere with each other, making it difficult for the TV
to receive signals.
APPENDIX ➤ Troubleshooting
En
57
Bluetooth
Receiving
Problem
Unable to connect the unit to a Bluetooth
device.
No sound is heard or the sound is
intermittent via the unit.
Cause
Remedy
“Bluetooth” is set to “Off”.
Set it to “On” (p. 46).
Bluetooth is not selected as the input source.
Select Bluetooth as the input source (p. 24).
Another Bluetooth device is connected.
Terminate the current Bluetooth connection, and connect to the device from
which audio should be received (p. 24).
A Bluetooth adaptor, etc. that you want to connect to the unit has a
password other than “0000”.
Use a Bluetooth adaptor, etc. whose password is “0000” (p. 24).
The device does not support A2DP.
Connect to a Bluetooth audio device that supports A2DP.
The unit and device are too far apart.
Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit
and connect the device to this unit.
There is a device (microwave oven, wireless LAN, etc.) outputs signals
in the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signals.
The device is not set to send Bluetooth audio signals to the unit.
Check that the Bluetooth function of the device is set properly.
Playback on the device has not been performed.
Perform playback on the device.
The device’s volume is set to minimum.
Turn up the volume level on the device.
The unit and device are too far apart.
Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit.
There is a device (microwave oven, wireless LAN, etc.) outputs signals
in the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signal.
The Bluetooth connection of the unit with the device is disconnected.
Perform Bluetooth connection operations again (p. 24).
APPENDIX ➤ Troubleshooting
En
58
Transmitting
Problem
Cannot make the unit connected to the
Bluetooth device.
No sound is heard or the sound is
intermittent via the Bluetooth device.
Cause
Remedy
“Bluetooth” is set to “Off”.
Set it to “On” (p. 46).
“Transmission” is set to “Off”.
Set it to “On” (p. 46).
Another Bluetooth device is connected.
Terminate the current Bluetooth connection, and connect to the device to
which audio should be transmitted (p. 25).
The device does not support A2DP.
Connect to a Bluetooth audio device that supports A2DP.
The unit and device are too far apart.
Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit
and connect the device to this unit.
There is a device (microwave oven, wireless LAN, etc.) outputs signals
in the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signals.
The device is not set to receive Bluetooth audio signals from the unit.
Check that the Bluetooth function of the device is set properly.
The device’s volume is set to minimum.
Turn up the volume level on the device.
The sound to be transmitted is not playing.
Play sound on the device selected with the input key (p. 25).
The unit and device are too far apart.
Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit.
There is a device (microwave oven, wireless LAN, etc.) outputs signals
in the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signals.
The Bluetooth connection of the unit with the device is disconnected.
Perform Bluetooth connection operations again (p. 25).
Attempted to establish a connection during playback with AirPlay.
Playback with AirPlay cannot be transmitted. Terminate AirPlay playback and
try again to establish a connection (p. 41).
APPENDIX ➤ Troubleshooting
En
59
Network
Cause
Remedy
The network feature does not function.
Problem
The network parameters (IP address) have not been obtained properly.
Enable the DHCP server function on your router and set “DHCP” in the setup
menu to “On” on the unit (p. 48). If you want to configure the network
parameters manually, check that you are using an IP address which is not
used by other network devices in your network.
“Not connected” is displayed with “Wireless
(Wi-Fi)” configuration; unable to connect to
wireless router (access point).
The wireless router’s MAC address filter is enabled.
A connection cannot be established if the wireless router’s MAC address filter
is enabled. Check wireless router (access point) settings and try a different
connection method (p. 48).
“Not connected” is displayed with “Wireless
(Wi-Fi)” configuration using the WPS
function (“WPS Button” and “PIN Code”) and
“Access Point Scan”; unable to connect to
wireless router (access point).
The wireless router (access point) does not broadcast its SSID.
A connection cannot be established if the wireless router (access point) is
configured so that it does not broadcast its SSID. Check wireless router
(access point) settings and try a different connection method (p. 31, 36).
“Not connected” is displayed with “Wireless
(Wi-Fi)” configuration using the WPS
function (“WPS Button” and “PIN Code”);
unable to connect to wireless router (access
point).
The wireless router (access point) uses WEP encryption.
A connection cannot be established using the WPS function. Try a different
connection method (p. 31, 36).
Playback stops unexpectedly and files
cannot be played continuously.
The folder contains some files that cannot be played via the unit.
Delete or move files (including video or hidden files) that cannot be played via
the unit from the folder.
The unit does not detect the PC.
The media sharing setting is not correct.
Configure the sharing setting and select the unit as a device to which music
contents are shared (p. 39).
Some security software installed on your PC is blocking the access of
the unit to your PC.
Check the settings of security software installed on your PC.
The unit and PC are not in the same network.
Check the network connections of the unit and PC, and then connect the unit
and the PC to the same network.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the setup menu, disable the MAC address filter or
specify the MAC address of your PC to allow it to access to the unit (p. 48).
The files are not supported by the unit or the media server.
Use the file format supported by both the unit and the media server (p. 39).
The files in the PC cannot be viewed or
played back.
APPENDIX ➤ Troubleshooting
En
60
Problem
The Internet radio cannot be played.
Cause
Remedy
The selected Internet radio station is currently not available.
There may be a network problem at the radio station, or the service may have
been stopped. Try the station later or select another station.
The selected Internet radio station is currently broadcasting silence.
Some Internet radio stations broadcast silence at certain of times of the day.
Try the station later or select another station.
Access to the network is restricted by the firewall settings of your
network devices (such as the router).
Check the firewall settings of your network devices. The Internet radio can be
played only when it passes through the port designated by each radio station.
The port number varies depending on the radio station.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the setup menu, disable the MAC address filter or
specify the MAC address of your mobile device to allow it to access to the unit
(p. 48).
The unit and mobile device are not in the same network.
Check the network connections and your router settings, and then connect
the unit and mobile device to the same network.
Firmware update via the network (Network
Update) fails.
It may not be possible depending on the condition of the network.
Update the firmware via the network (Network Update) again or use a USB
flash drive (p. 52).
The iPod does not recognize the unit when
using AirPlay.
The unit and iPod/mobile device are connected to different SSIDs on
the same access point.
Check the network connections for the unit and your mobile device, and
connect them to the same SSID.
The wireless router (access point) is turned off.
Turn on the wireless router (access point).
The dedicated apps for mobile device does
not detect the unit.
The app installed on a mobile device does not
recognize the unit.
The unit cannot connect to the Internet via a
wireless router (access point).
Wireless network is not found.
The unit and the wireless router (access point) are too far apart.
Place the unit and the wireless router (access point) closer to each other.
There is an obstacle between the unit and the wireless router (access
point).
Move the unit and the wireless router (access point) in a location where there
are no obstacles between them.
There is a device (microwave oven, wireless LAN, etc.) outputs signals
in the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signals.
Access to the network is restricted by the firewall settings of the
wireless router (access point).
Check the firewall setting of the wireless router (access point).
APPENDIX ➤ Troubleshooting
En
61
Pairing the center unit and subwoofer
6
Use an object with a fine point, such as a pin, to
hold down the SUBWOOFER PAIRING button on the
subwoofer for more than 3 seconds.
NOTE
• Be sure that “Bass Out” of “Subwoofer” in the setup menu is set to “Wireless” (p.
45).
Pairing is the process of establishing a wireless connection between
the center unit and subwoofer.
When the center unit is turned on for the first time, the center unit
and subwoofer are usually paired automatically. If a problem occurs
(e.g., the STATUS indicator on the subwoofer does not glow green),
follow the instructions below to pair the center unit and subwoofer
manually.
/
ENTER
SETUP
1
2
3
4
5
SUBWOOFER
PAIRING
STATUS
SUBWOOFER
PAIRING
STATUS
SYSTEM
CONNECTOR
INPUT
Turn on the center unit.
Rear panel of the subwoofer
Press the SETUP key.
The subwoofer’s STATUS indicator will rapidly blink green.
Once pairing has been completed and the link between the
center unit and subwoofer has been re-established, the
STATUS indicator will glow green. “Completed” appears on the
TV screen.
Use the S/T keys to select “Sound”, and then
press the ENTER key.
Use the S/T keys to select “Subwoofer”, and then
press the ENTER key.
Use the S/T keys to select “Pairing”, and then
press the ENTER key.
HINT
• If “Not connected” is displayed on the TV screen or the subwoofer’s STATUS
indicator does not glow green after 30 seconds have passed, repeat the
procedure from step 2. If the problem persists, refer to “No sound is coming from
the subwoofer.” in “Troubleshooting” (p. 56).
APPENDIX ➤ Troubleshooting
En
62
Specifications
YAS-CU706
Item
Item
Specifications
Amplifier
Section
Maximum Output
Power
Tweeter 5 W x 2 ch
Supported codecs
Subwoofer 100 W
Front L/R
Section
Tweeter
Section
Subwoofer
Section
Decoder
Input Jacks
Output Jack
Other Jacks
Type
Acoustic suspension type
Driver
5.5 cm (2-1/8") cone non-magnetic shielding
type x 2
Frequency Response
220 Hz to 4 kHz
Impedance
6Ω
Type
—
Driver
Tweeter
19 mm (3/4") balanced dome magnetic shielding
type x 4 (2 in use at any particular time)
Frequency Response
4 kHz to 23 kHz
Impedance
8Ω
Type
Bass reflex type
Driver
Specifications
Ethernet standard: 100BASE-T/10BASE-T
Front L/R 50 W x 2 ch
Network
WAV (PCM format only) /AIFF/FLAC:
up to 192 kHz
ALAC: up to 96 kHz
MP3/WMA/MPEG-4 AAC: up to 48 kHz
Compatible with DLNA ver. 1.5
AirPlay supported
Internet Radio
Wireless LAN
Standards
IEEE802.11b/g/n
Radio Frequency
Band
2.4 GHz
WPS (Wi-Fi Protected
Setup)
Push-Button-Method, PIN Method
Security Type
WEP, WPA2-PSK (AES), Mixed Mode
Bluetooth version
Ver. 2.1 +EDR
2.4 GHz
7.5 cm (3") cone non-magnetic shielding type x 2
Radio Frequency
Band
Frequency Response
100 Hz to 220 Hz
Supported profiles
A2DP, AVRCP
Impedance
6Ω
Supported codecs
Receiving: SBC, AAC
Transmitting: SBC
Supported audio
signal
Dolby Digital, Dolby Digital Plus, Dolby True HD
DTS, DTS96/24, DTS Express, DTS-HD High
Resolution / Master Audio
PCM (2-channel, Multi-channel)
Wireless output
Bluetooth Class 2
Approx. 10 m (33 ft) (without obstructions)
HDMI
2 (HDMI IN 1–2)
Maximum
communication
distance
Digital (Optical)
1 (TV)
1 (COAXIAL)
Supported content
protection method
SCMS-T (receiving)
Digital (Coaxial)
Analog (RCA/stereo)
1 pair (ANALOG)
HDMI
1 (HDMI OUT (ARC))
Analog
(RCA/monaural)
1 (SUBWOOFER OUT)
System connection
1 (SYSTEM CONNECTOR)
USB
1 (UPDATE ONLY)
LAN
1 (NETWORK)
Wireless LAN
(Wi-Fi)
Bluetooth
APPENDIX ➤ Specifications
En
63
Item
General
Specifications
Power Supply
U.S.A. and Canada models: AC 120 V, 60Hz
Taiwan model: AC 110 - 120 V, 50/60Hz
China model: AC 220V, 50Hz
Other models: AC 220 - 240 V, 50/60Hz
Power Consumption
38 W
Standby Power
Consumption
HDMI Control Off, Network Standby Off: 0.3 W
HDMI Control On, Network Standby Off: 1.0 W
HDMI Control Off, Network Standby On
(Wired/Wi-Fi/Wireless Direct/Bluetooth):
1.9/2.0/2.0/1.7 W
HDMI Control On, Network Standby On: 2.5 W
Dimensions
(W x H x D)
Weight
950 x 72 x 131 mm (37-3/8" x 2-7/8" x 5-1/8")
(installing the unit in front of a TV, etc.)
950 x 131 x 80 mm (37-3/8" x 5-1/8" x 3-1/8")
(mounting the unit on a wall, with spacer)
NS-WSW121
Item
Amplifier
section
Speaker
section
Input jacks
Wireless
function
75 W (100 Hz, 6 Ω, 10% T.H.D)
Dynamic power
130 W
Driver
14 cm (5-1/2 in) cone non-magnetic shielding
type × 1
Frequency response
40 Hz to 100 Hz
Analog (RCA/
monaural)
1 (INPUT)
Radio frequency band
2.4 GHz
Maximum
communication
distance
10 m (33 ft) (without obstructions)
1 (SYSTEM CONNECTOR)
Power supply
U.S.A. and Canada models: AC 120 V, 60 Hz
Taiwan model: AC 110–120 V, 60 Hz
Australia model: AC 240 V, 50 Hz
China model: AC 220 V, 50 Hz
Korea model: AC 220 V, 60 Hz
Asia model: AC 220–240 V, 50/60 Hz
Power consumption
75 W
Standby Power
Consumption
1.5 W (Wireless)
1.5 W (Wired)
Dimensions
(W x H x D)
295 × 297 × 307 mm
(11-5/8 × 11-3/4 × 12-1/8 in)
Weight
9.1 kg (20 lbs)
5.4 kg (11.9 lbs)
General
Specifications
Output power
APPENDIX ➤ Specifications
En
64
HDMI signal
• Video signals
This unit is compatible with the following video signals.
• Deep Color
• Audio signals
Audio signal
types
Audio signal
formats
Compatible
media
• x.v.Color
2ch Linear PCM
2ch, 32–192 kHz,
16/20/24 bit
CD, DVD-Video,
DVD-Audio, etc.
• High Dynamic Range (HDR) video
Multi-ch Linear
PCM
8ch, 32–192 kHz,
16/20/24 bit
DVD-Audio, Bluray disc, HD DVD,
etc.
This unit is compatible with the following resolutions.
Bitstream
(SD Audio)
Dolby Digital,
DTS
DVD-Video, etc.
Bitstream
(HD Audio)
Dolby TrueHD,
Dolby Digital Plus,
DTS-HD Master
Blu-ray disc, HD
Audio, DTS-HD
DVD
High Resolution
Audio, DTS
Express
HINT
• Refer to documentation supplied with the playback device, and set
the device appropriately.
• When CPPM copy-protected DVD-Audio is played back, video and
audio signals may not be output depending on the type of the DVD
player.
• This unit is not compatible with HDCP-incompatible HDMI or DVI
devices. Refer to documentation supplied with the HDMI or DVI
device for HDCP compatibility.
• To decode audio bitstream signals on this unit, set the input source
device appropriately so that the device outputs the bitstream audio
signals directly (does not decode the bitstream signals on the
device). Refer to documentation supplied with the device for details.
• 3D video signal
• VGA
• 720p/60 Hz, 50 Hz
• 480i/60 Hz
• 1080i/60 Hz, 50 Hz
• 480p/60 Hz
• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz,
24 Hz
• 576i/50 Hz
• 576p/50 Hz
• 4K (4:4:4, 4:2:2, 4:2:0)/60 Hz,
50 Hz, 30 Hz, 25 Hz, 24 Hz
HINT
Digital audio signal
• Optical/coaxial
Audio signal
types
Audio signal
formats
Compatible
media
2ch Linear PCM
2ch, 32–96 kHz,
16/20/24 bit
CD, DVD-Video,
DVD-Audio, etc.
Bitstream
Dolby Digital,
Dolby Digital EX,
DTS, DTS-ES
DVD-Video, etc.
Audio signal
types
Audio signal
formats
Compatible
media
2ch Linear PCM
2ch, 32–192 kHz,
16/20/24 bit
TV
Bitstream
Dolby Digital Plus,
Dolby Digital,
TV
DTS
• HDMI (ARC)
• The resolution of transmitted video signal varies according to
specifications of the TV connected to this unit.
The contents of this manual apply to the latest specifications as of the
publishing date.
To obtain the latest manual, access the Yamaha website then
download the manual file.
APPENDIX ➤ Specifications
En
65
refer to the Yamaha Corporation website
(http://download.yamaha.com/sourcecodes/musiccast/).
This system is equipped with Yamaha’s AIR SURROUND XTREME
virtual sound technology that achieves superior positional, high-grade
7.1 channel surround sound using the sound bar.
MusicCast is a trademark or registered trademark of Yamaha
Corporation.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, &
DTS and the Symbol together are registered trademarks of DTS, Inc.
© DTS, Inc. All Rights Reserved.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha
Corporation is under license.
Bluetooth
Bluetooth is a technology for wireless communication employing the
2.4 GHz frequency band, which can be used without a license.
Handling Bluetooth communications
• The 2.4 GHz band used by Bluetooth compatible devices is a radio
band shared by many types of equipment. While Bluetooth
compatible devices use a technology minimizing the influence of
other components using the same radio band, such influence may
reduce the speed or distance of communications and in some cases
interrupt communications.
• The speed of signal transfer and the distance at which
communications is possible differs according to the distance
between the communicating devices, the presence of obstacles,
radio wave conditions and type of equipment.
• Yamaha does not guarantee all wireless connections between this
unit and devices compatible with Bluetooth function.
Bluetooth protocol stack (Blue SDK)
Copyright 1999-2014 OpenSynergy GmbH
All rights reserved. All unpublished rights reserved.
Windows
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
Internet Explorer, Windows Media Audio and Windows Media Player
are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
The terms HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
“x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation.
DLNA™ and DLNA CERTIFIED™ are trademarks or registered
trademarks of Digital Living Network Alliance. All rights reserved.
Unauthorized use is strictly prohibited.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an
electronic accessory has been designed to connect specifically to
iPod, iPhone, or iPad, respectively, and has been certified by the
developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect wireless
performance.
Supports iOS 7 or later for setup using Wireless Accessory
Configuration.
iTunes, AirPlay, iPad, iPhone, iPod, iPod nano, iPod touch, and Safari
are trademarks of Apple Inc., registered in the U.S. and other
countries.
The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance.
The Wi-Fi Protected Setup Identifier Mark is a certification mark of WiFi Alliance.
Wi-Fi, Wi-Fi Alliance, Wi-Fi CERTIFIED, Wi-Fi Protected Setup, WPA
and WPA2 are trademark or registered trademark of Wi-Fi Alliance.
AppStore
App Store is a service mark of Apple Inc.
Android / Google Play
Android and Google Play are trademarks of Google Inc.
Blu-ray
“Blu-ray Disc™”, “Blu-ray™”, and the logos are trademarks of the
Blue-ray Disc Association.
Explanations regarding GPL
This product utilizes GPL/LGPL open-source software in some
sections. You have the right to obtain, duplicate, modify, and
redistribute this open-source code only. For information on GPL/LGPL
open source software, how to obtain it, and the GPL/LGPL license,
APPENDIX ➤ Specifications
En
66
Yamaha Global Site
http://www.yamaha.com/
Yamaha Downloads
http://download.yamaha.com/
Manual Development Group
© 2016 Yamaha Corporation
Published 01/2019 KS-D0
YH958A0/EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising