Yamaha | YSP-5600 | Owner’s Manual | Yamaha YSP-5600 Owner’s Manual

Yamaha YSP-5600 Owner’s Manual
Digital Sound Projector
Owner’s Manual
for North America, Central and South America,
Australia, Asia and Taiwan models
Read the supplied booklet “Quick Reference Guide” before using the unit.
English
CONTENTS
FEATURES
4
PLAYBACK
36
What you can do with this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Basic operation for playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Enjoying sound based on your preference . . . . . . . . . . . . . . . . . . . . . . . . 37
Preparing remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Playback with 3D surround sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Controls and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Playback with surround sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Enjoying three-dimensional surround sound (CINEMA DSP 3D/CINEMA DSP) . . . . . . . . . . . . . . . . . . . . . . . . 38
11
2-channel playback (stereo playback mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
a Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
b Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
c Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
d Other connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Playing back digitally compressed formats (such as MP3, etc.) with enriched sound
(Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Using useful features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Connecting a subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Saving energy with the Eco function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Wired network connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Switching information displayed in the front panel display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
e Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
f Initial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Wireless playback of audio via Bluetooth connection . . . . . . . . . . . . . . 45
PREPARATIONS
Delivering sound to a specified location (target playback mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Clear playback of human voices (CLEAR VOICE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Adjusting the position from which dialog is heard (Dialog Lift) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Adjusting volume for each channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Saving this unit’s settings to system memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Displaying the menu screen on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Listening to music from a Bluetooth device (Receiving) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Selecting the language for menu display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Listening to audio through Bluetooth speakers or headphones (transmitting) . . . . . . . . . . . . . . . . . . . . . . . 48
Auto setup for appropriate surround effects (IntelliBeam) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Operating the unit by TV’s remote control (HDMI control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
En
2
NETWORKS
49
APPENDIX
90
Network functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Connecting to a network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Wired network connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Wireless network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Connecting a mobile device to the unit directly (Wireless Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 60
Messages in the front panel display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
When surround effect is not enough . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Playing music files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Installing and adjusting the sound reflection board YRB-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Basic Knowledge of Surround Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Playback of Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
What is a Digital Sound Projector? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Registering favorite Internet radio stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
What is Object Based Audio? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Playing back music with AirPlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Yamaha’s Audio Technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Playing back music stored on mobile devices . . . . . . . . . . . . . . . . . . . . . 65
Network information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Using a mobile device to play songs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
SETTINGS
66
Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Setting the setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Setup menu list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Settings each input source (Option menu) . . . . . . . . . . . . . . . . . . . . . . . . 83
Setting the option menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Option menu list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Advanced setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Setting the advanced setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Advanced setup list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Updating the unit’s firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Using “Network Update” in the setup menu to update firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Updating firmware with connection of a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
En
3
FEATURES
What you can do with this unit
Sound beams are reflected off walls and a ceiling using unique
real surround sound formats and techniques, allowing listeners to
enjoy their preferred acoustic environment.
• Automatically and quickly adjusts surround
sound effects for the listening room setup
(IntelliBeam)
• Emphasize the sense of immersion and reality of
the sound field with overhead sounds fed via
height channels (3D Surround Sound)
• Reproducing stereo or multichannel sounds with
the sound fields like actual movie theaters and
concert halls (CINEMA DSP 3D/CINEMA DSP)
• Enjoying compressed music with enhanced
sound (Compressed Music Enhancer)
• Delivering sound to a specified location (Target
playback mode)
• Media server (PC/NAS)
TV
. p. 37
• Internet radio
Dedicated apps
for mobile
devices
. p. 38
. p. 5
• Music stored on mobile
devices
p. 60
p. 61
p. 63
p. 65
. p. 40
Audio
HDMI
Control
Audio
Mobile
devices
Audio/
Video*
Network contents
Control
TV remote
control
Subwoofer (optional or available
from third-party manufactures)
• AirPlay
.
.
.
.
. p. 41
Sequential operation of a TV, this unit, and
BD/DVD player (HDMI Control)
. p. 34
Wide variety of supported content
. p. 29
MusicCast devices
Audio
Share music
via your home
network
. p. 5
Audio
Audio
Control
Audio
The unit
HDMI
Control
Audio/
Video*
Plays back audio content
from Bluetooth® devices
Audio
Control
. p. 46
Mobile
devices
Listen to audio input to the
unit with Bluetooth
headphones or speakers
Audio
Wireless subwoofer kit
SWK-W16 (optional)
This unit’s
remote control
BD/DVD player
* Supports 4K video and HDCP version 2.2
Bluetooth
headphones
FEATURES ➤
. p. 48
What you can do with this unit
En
4
Achieve true 3D surround sound including height
channel audio with the unit alone
Unrestricted playback of music over a network using
MusicCast CONTROLLER
Until now, digital sound projectors have reproduced a two-dimensional sound field with
five distinct sound beams: left front, right front, center, left surround, and right surround.
The free dedicated app for mobile devices, MusicCast CONTROLLER, allows you to
listen to music stored on mobile devices such smartphones, or on servers, or to listen to
Internet radio stations and many kinds of major streaming services.
This unit reproduces a three-dimensional sound field offering a greater sense of
immersion and depth by directing additional two sound beams (left height and right
height) upward. It also enables playback in the DTS:X or Dolby Atmos format, which
uses height channel audio signals as input sources. It further incorporates CINEMA
DSP 3D, which produces a more effective sound field.
This app also allows you to distribute content to other MusicCast-enabled devices for
synchronized playback.
See the “MusicCast Setup Guide” for details.
Search for “MusicCast CONTROLLER” on the App Store or Google Play.
The sound image of the system
Bluetooth functions
You can receive and play audio from a Bluetooth device, such as a mobile device over
a wireless connection. You can also transmit audio input to the unit to a Bluetooth
headphones.
Using HOME THEATER CONTROLLER (WLAN) to easily
operate the unit
The free dedicated app for mobile devices, HOME THEATER CONTROLLER (WLAN),
allows you to easily operate the unit, performing such tasks as configuring sound
beams on a visual screen, selecting an input source, and adjusting the volume on a
mobile device.
Dialog Lift function
Search for “HOME THEATER CONTROLLER (WLAN)” on the App Store or Google Play.
When playing movies, this feature can be adjusted so that audio such as narratives and
dialog is output from the center speakers, as in a movie theater where speakers are
installed behind the screen, allowing for a sense of integration of conversation with the
movements of the actors (p. 41).
Wireless subwoofer connection using the optional
wireless subwoofer kit
The unit and the subwoofer can be connected via a wired connection. In addition, a
wireless connection can be established using the optional wireless subwoofer kit
(SWK-W16) (p. 25).
• In this manual, iOS and Android mobile devices are collectively referred to as “mobile devices”. The specific
type of mobile device is noted in explanations as needed.
FEATURES ➤
What you can do with this unit
En
5
About this manual
• In this manual, operations that can be performed using either the front panel keys or the remote control
are explained using the remote control.
•
indicates supplementary explanations for better use.
•
indicates precautions for use of the unit and its feature limitations.
Supplied accessories
Before connecting, make sure you have received all of the following items.
YSP-5600
• The supplied optical cable may not be needed depending upon connections.
The unit
Supplied accessories
Remote control
Batteries
(AAA, R03, UM-4) (x2)
Optical cable
(1.5 m (4.9 ft))1
Power cable (2 m (6.6 ft))2
IntelliBeam microphone
(6 m (19.7 ft))
Cardboard microphone stand
Stands (x2)
Screws (For the stands; x2)
• Owner’s Manual CD-ROM • Quick Reference Guide
• MusicCast Setup Guide
1
China model only: Instead of the optical cable, a digital coaxial audio cable is
supplied.
2
The shape of the power cable plug varies depending on where the unit was
purchased.
FEATURES ➤ Supplied accessories
En
6
Preparing remote control
Before installing batteries or using the remote control, be sure to read battery and remote control precautions in “Quick Reference Guide” (separate booklet).
Installing the batteries
Operation range
Battery × 2
(AAA, R03, UM-4)
Press down on the arrow
and slide the cover in the
direction in which it
points.
Within 6 m (20 ft)
Slide the cover back to close it.
FEATURES ➤ Supplied accessories
En
7
Controls and functions
The unit (front, top)
CONNECT
VOLUME
INPUT
7
STATUS
123 4
1 STATUS indicator
Lights to show the system condition.
Glows green: Power on
Glows red: Power off (when the HDMI control or network
standby is activated)
Turns off: Power off
2
(Wi-Fi) indicator
Shows the status of wireless network connection (p. 51).
3
(Bluetooth) indicator
Shows the status of Bluetooth connection (p. 45, 48).
4 Remote control sensor
Receives infrared signals from the remote control (p. 10).
5 Front panel display
Displays the unit’s settings, such as the name of an audio
input source or surround mode (p. 43). The setting values
are also displayed.
8
9
INTELLIBEAM MIC
5
6
6 INTELLIBEAM MIC jack
For connecting the supplied IntelliBeam microphone (p. 30).
7 INPUT/CONNECT key
INPUT key
• When the unit is turned off, this unit consumes a small amount of
power in order to search for HDMI signals or to receive signals from
a network device.
Select an audio input source.
CONNECT key
Use to control the unit using the dedicated MusicCast
CONTROLLER app for mobile devices. See the MusicCast
Setup Guide for details.
• The front panel display turns on for 3 seconds only when the unit is
operated.
• “Dimmer” can adjust the brightness of the front panel display and
indicators in the setup menu (p. 77).
8 VOLUME (+/-) keys
Adjust the volume of the unit (p. 36).
9 z key
Turn on/off the unit.
FEATURES ➤ Controls and functions
En
8
The unit (rear)
• So that the HDMI and NETWORK jacks may be easily located, the illustration of the rear of the unit used in this manual shows their respective positions with the labels used on the unit itself.
1 2
3
4
5
6
IN 1
(HDCP2.2)
7
UPDATE ONLY
SYSTEM
SUBWOOFER
CONNECTOR
OUT
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
IN 2
8
RS-232C
IN 3
0
IN 4
HDMI
IN 1
(HDCP2.2)
9
OUT
(ARC)
IN 2
NETWORK
IN 3
IN 4
HDMI
OUT
(ARC)
NETWORK
UPDATE ONLY
AC IN
SYSTEM
SUBWOOFER
CONNECTOR
OUT
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
RS-232C
a
1 SYSTEM CONNECTOR jack
Connect to a Yamaha subwoofer so that the subwoofer
functions according to the unit’ power on and off (p. 25).
2 SUBWOOFER OUT jack
For connecting to the subwoofer using a wired connection
(p. 25).
3 AUX1 analog input jacks
For connecting to a playback device equipped with the
analog audio output jacks (p. 24).
4 AUX2 digital coaxial input jack
For connecting to a playback device equipped with a digital
coaxial audio output jack (p. 24).
5 TV and OPTICAL jacks
For connecting to a playback device equipped with an
digital optical audio output jack (p. 22, 23).
6 IR-IN, IR-OUT, and RS-232C jacks
0 NETWORK jack
For connecting to a network with a network cable (p. 51).
A AC IN jack
Connect the supplied power cable (p. 26).
They are control expansion jacks for commercial use only.
7 UPDATE ONLY jack
Use to update this unit’s firmware (p. 87).
8 HDMI IN 1–4 jacks
For connecting an HDMI-compatible playback device such
as a BD/DVD player, a satellite and cable TV tuner, and a
game console (p. 23).
9 HDMI OUT (ARC) jack
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p. 22).
FEATURES ➤ Controls and functions
En
9
Remote control
1 ECO key
E NET RADIO (1–3) keys
Turn the Eco function on or off (p. 43).
Infrared signal transmitter
2 Input selector keys, NET key
Input selector keys
Select an audio input source to be played back (p. 36).
1
d
e
G VOL (+/-) key
H OPTION (
4 SUB (+/-) key
f
4
5
6
g
Adjust the volume of the subwoofer (p. 36).
5 MUTE (
) key
Mute the sound (p. 36).
6 SETUP (
h
) key
Display the setup menu (p. 66).
7 S/T/W/X keys, ENTER key
Change the setting (p. 66).
7
8 RETURN (
8
9
0
a
b
c
i
) key
Return to the previous menu screen.
9 CINEMA DSP program keys
j
k
l
m
Use the Dialog Lift function to adjust the height from which
dialog is heard (p. 41).
Select an audio input via a network (p. 49). Each time the key
is pressed, the input source is selected as follows:
SERVER NET RADIO AirPlay Streaming music
service (if available) MusicCast Link SERVER …
Save IntelliBeam measurements, speaker volume, and other
settings (p. 44).
3
F DIALOG LIFT key
NET key
3 SYSTEM MEMORY keys
2
Register and play streaming services such as Internet radio
stations via the unit (p. 61).
When playback is in surround playback mode, select the
CINEMA DSP programs (p. 38).
Adjust the volume of the unit (p. 36).
) key
Display the option menu for each input source (p. 83).
I INFO (
) key
Switch the information display on the front panel (p. 43).
J STEREO key
Switch to stereo playback mode (p. 40).
K TARGET key
Switch to target playback mode (p. 40).
L WPS/CH LEVEL key
WPS key
Use the key when connecting to a wireless router (access
point) that supports the WPS (push button) feature (p. 53).
CH LEVEL key
Adjust the volume balance during playback (p. 42).
M CONNECT key
Use to control the unit using the dedicated MusicCast
CONTROLLER app for mobile devices. See the MusicCast
Setup Guide for details.
0 SURROUND key
Switch to surround playback mode (p. 38).
A 3D SURROUND key
Switch to 3D surround playback mode (p. 37).
B CLEAR VOICE key
Turn the CLEAR VOICE function on or off (p. 41).
C ENHANCER key
Turn Compressed Music Enhancer to on or off (p. 41).
D z key
Turn on/off the unit (p. 36).
FEATURES ➤ Controls and functions
En
10
PREPARATIONS
General setup procedure
1
Installation (p. 12)
Position the unit to achieve the optimal surround sound effects. The unit can also be mounted
on a wall.
2
Connecting a TV (p. 22)
Connect a TV to the unit.
3
Connecting playback devices (p. 23)
Connect video devices (such as BD/DVD players) to the unit.
4
Other connections (p. 25)
5
Connecting the power cable (p. 26)
After all the connections are complete, plug in the power cable.
6
Initial settings (p. 27)
Perform initial setup, such as adjusting surround sound effects, before attempting playback.
Connect a subwoofer.
Use a network cable to connect the unit to a router in preparation for wired network connection.
This completes all the preparations. Enjoy playing movies, music and other content with the unit!
• See “NETWORKS” (p. 49) for information regarding network connection and audio playback via a network.
PREPARATIONS
➤ General setup procedure
En
11
1 2 3 4 5 6
a Installation
This unit reflects sound beams off of walls and a ceiling to create the surround sound effect. The position of this unit in relation to the listening position, walls, and a ceiling is important
to achieving the desired surround sound effects. Refer to pages 12 to 16 when installing the unit. When installing this unit on a rack behind which there is limited space, for example,
it may be easier to connect external devices to this unit first. This will depend upon the installation location. See pages 22 to 25 for information regarding the connection of external
devices.
Notes
• Be sure to install this unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.
• There is a built-in antenna on the top of the unit. Do not install it on a metal rack, and do not stack metal items on top of the unit.
• The unit’s speakers are not magnetically shielded. Do not install hard disk drives or similar devices near the unit.
• Do not stack the unit directly on top of other playback devices, or vice versa. Heat and vibrations may result in damage or malfunction.
Recommended place for installation
• Be sure that the unit installed with at least 5 cm
of empty space above and below it.
• Install the unit in the center of the left and right
walls.
• This unit can be mounted on a wall (p. 17).
• The listening position (such as sofa, etc.) should be
located at the front of the unit.
• The distance between the listening position and the
unit should be more than 1.8 m (6 ft).
• Set the listening position as far from the back wall as
possible (the optimal listening position is halfway
between the unit and the back wall, or slightly closer
to the back wall).
• Leaving as much space as possible in a
diagonal direction in front of, and above, the
unit when installing it.1
• Attach the supplied stands to the unit if it will
be installed on a rack 2 (p. 16).
1
Height channel audio is output in a diagonal
direction upward and forward from the unit (p. 5).
2
Depending upon the rack, table-top stand, or
floor stand used, the stands may not be
necessary.
• To achieve desired surround sound effects, be
sure that obstacles such as furniture may not
obstruct the path of sound beams (p. 13).
PREPARATIONS
➤ a Installation
En
12
1 2 3 4 5 6
Parallel installation
Install this unit as close to the exact center of the wall as possible.
Example for installing the unit
This unit outputs sound beam as shown in the illustrations below. Install this unit where
there are no obstacles such as furniture obstructing the path of sound beams.
Otherwise, the desired surround sound effects may not be achieved.
If the unit is installed so that it is parallel to a wall, install it as close to the exact center of
the wall as possible.
If the unit is installed in a corner of a room, position it at a 40–50° angle to the adjacent
walls.
Parallel installation: Viewed from above
Viewed from the side
Objects,
such as
furniture
Sound beams
are reflected off
the ceiling
• If the unit cannot be installed evenly between the left and right walls, sound beams can be adjusted to
achieve natural surround sound effects (p. 16).
Ideal installation condition
Install this unit as close to the exact front of your normal listening position as possible.
The distance between listening position and the unit should be more than 1.8 m (6 ft).
Sound beam output varies depending upon the 3D surround/Surround setting (p. 37, 38)
and the channel output setting (p. 72). The illustration above shows the path of sound
beams when 3D surround is enabled and “Front” in the Channel Out setting is set to
“Beam”.
Corner installation: Viewed from above
Viewed from the side
Sound beams
are reflected off
the ceiling
40° to 50°
More
than
1.8 m
(6 ft)
Objects, such as
furniture
The illustrations above show the path of sound beams when 3D surround is enabled
(p. 37) and “Front” in the Channel Out setting is set to “Stereo”. (p. 72).
More than
1.8 m (6 ft)
PREPARATIONS
➤ a Installation
En
13
1 2 3 4 5 6
Installing in a non-square room
Install this unit so that the sound beams can be reflected off the walls.
Irregularly shaped rooms that are open to a hallway on one side
Irregularly shaped rooms with solid walls on all sides
• If this unit cannot be repositioned, or the listening position cannot be changed, the optional YRB-100 sound
reflection board may be installed for a better surround sound experience (p. 99).
PREPARATIONS
➤ a Installation
En
14
1 2 3 4 5 6
Example for installing the unit in living room
• The legs on a table are not considered obstacles as sound beams normally pass
through them. A cupboard installed facing the wall reflects sounds.
• As the heavy curtains absorb sounds, the sound features of the listening room is
different from the case with the curtain opened and the case with the curtain closed.
Using saving settings function enables to save the best settings for each case of
listening room (p. 44).
Objects, such as
furniture
Unrecommended listening environments
This unit creates surround sound by reflecting projected sound beams off the walls and
the ceiling of your listening room. The surround sound effects produced by this unit
may not be sufficient when this unit is installed in the following locations.
• Rooms with walls inadequate for reflecting sound beams
• Rooms with acoustically absorbent walls and ceiling
• Rooms with measurements outside the following range:
W (3 to 7 m (10 to 23 ft)) × H (2 to 3.5 m (7 to 11.5 ft)) ×
D (3 to 7 m (10 to 23 ft))
• Rooms where objects such as furniture are likely to obstruct the path of sound beams
• Rooms with less than 1.8 m (6 ft) from the listening position to this unit
• Rooms where the listening position is close to the walls
• Rooms where the listening position is not in front of this unit
• Rooms with a complex shape, such as a slanted ceiling (ceiling lights do not obstruct
sound beams)
Enjoying surround effects regardless of conditions (My
Surround)
The My Surround function creates rich surround sound effects in rooms with less than
optimal surround sound conditions. See “Channel Out” (p. 72) for more information.
PREPARATIONS
➤ a Installation
En
15
1 2 3 4 5 6
Adjusting sound beams to achieve optimal surround
sound effects
This unit’s AUTO SETUP (p. 29) can be used to automatically adjust sound beams to
achieve the optimal surround playback environment according to the listening room
setup. In addition to using AUTO SETUP, sound beams can be adjusted manually to
achieve surround sound effects best suited to the listening room setup when the unit is
installed as described below.
Installing the stands
Install the stands (supplied) on the bottom of the unit. Align and insert the protrusion on
the stands into the holes on the rear panel of the unit as shown in the illustration, and
then tighten the screws (supplied) to lock the stands in place. The stands need not be
installed when the unit is mounted on a wall using the optional Wall Mount Bracket
SPM-K30.
Installing the unit near a corner of the room
When installing the unit near a corner of the room as shown in the illustration below,
front channel sound may seem to come from an unnatural direction if beam settings are
configured using AUTO SETUP.
Should this occur, adjust the left and right front channels using “Image Location” (p. 71)
in the setup menu to achieve more natural sound.
When left front channel sound is
unnatural
Stand (supplied)
Left front channel adjusted
Installing the unit in an irregularly shaped room
When the unit is installed in a room that is not rectangular, sound beams may not be
properly reflected off the walls as shown in the illustration below.
Screws (supplied)
Stand (supplied)
Should this occur, perform AUTO SETUP, and then adjust the angle of beam from the
channel from which sound is not properly heard using “Horizontal Angle” (p. 69) in the
setup menu to achieve even distribution of sound.
PREPARATIONS
➤ a Installation
En
16
1 2 3 4 5 6
Installing the unit on a rack
The unit can be installed on a shelf, either above or below the TV, on a third-party rack.
The rack and the shelf on which the unit is placed should be large enough to allow
adequate ventilation around the unit and the rack should be sturdy enough to support
the weight of both the unit and the TV.
Mounting the unit on a wall
The unit can be mounted on a wall using the optional Wall Mount Bracket (such as
SPM-K30).
Notes
Instructions for mounting the unit are not included in the Installation Manual supplied
with the SPM-K30. Always follow the instructions provided in this Owner’s Manual.
TV
Wall Mount Bracket (SPM-K30)
YSP-5600
TV
Dimensions when the unit is mounted using the SPM-K30
Be sure to refer to the dimensions below and leave adequate space for ventilation
around the unit.
YSP-5600
(mm)
355
355
182
92
114
26.5
188
24- 7x22
4- 7
71.5
730
SPM-K30 (optional)
112.4
19.4
PREPARATIONS
➤ a Installation
En
17
1 2 3 4 5 6
2
• The SPM-K30 may not be available in some countries or regions.
• When the unit will be installed using the wall mount bracket, all installation work should be performed by a
qualified contractor or experienced retail staff. The customer should not attempt to install the unit
themselves. Improper installation may cause the unit to fall, resulting in personal injury.
• Installation must be secure enough to bear the weight of the unit and the wall mount bracket, possibly for
years to come, and must also be secure enough to withstand vibrations, such as those caused by
earthquakes. Improper installation may cause the unit to fall, resulting in personal injury.
• To prevent the unit from falling, attach it to a wall constructed of drywall (plasterboard).
Attach the wall mount bracket assembled in step 1 to the wall.
In order to secure the unit to the wall, the bracket must first be attached to the
wall in a manner suited to the structure and quality of the wall.
4mm self-tapping screws (available from third-party manufacturers)
Washers (available from third-party manufacturers)
• Be sure to use screws capable of supporting the weight of the wall mount bracket and the unit (with steps 2
and 7). Using items other than the specified screws, such as shorter screws, nails, or double-sided tape,
may cause the unit to fall, resulting in personal injury.
• To ensure safety, all screws must be tightened securely. Loose screws may cause the unit to fall, resulting
in personal injury.
• Be sure to leave adequate space for ventilation around the unit so that heat generated by the unit is allowed
to dissipate. Failure to provide adequate space around the unit may cause the unit to overheat internally,
resulting in a fire.
• Do not lean on the unit or apply excessive force to the top of the unit. Doing so may cause the unit to fall,
resulting in personal injury.
• Fix cables in place so that they will not become loose. If a foot or hand becomes accidentally entangled in,
or catches on, a loose cable, the unit may fall, resulting in personal injury.
Installing into a
dray wall
25 mm or more
Installing directly
into a wall, etc.
25 mm or more
• Once the unit is installed, safety checks should be conducted on a regular basis. When the unit is used
over an extended period of time, screws can become loose and the installation can weaken due to the
passage of time, vibrations, etc.
• Note that Yamaha cannot be held liable for accidents, including falling of the unit, resulting from improper
installation of the unit, or for damage to walls.
1
Beam, etc. Dry wall
Assemble the large wall mount bracket.
Align the screw holes A on the left bracket with those on the right bracket, and
tighten the screws.
• In order to secure the unit to the wall, drive six (or more) tapping screws from the outside through the holes
in the wall mount bracket.
Large wall mount bracket (left)
Screw (M4; supplied with the SPM-K30)
A
Large wall mount
bracket (right)
A
730 mm
PREPARATIONS
➤ a Installation
En
18
1 2 3 4 5 6
3
4
Attach the small wall mount brackets to the unit.
Attach the safety wires to the small wall mount brackets (left and
right) to prevent the unit from falling.
Safety wire
Screws (M4;
supplied with the
SPM-K30)
Small wall mount
bracket (Type B)
Screws(M4;
supplied with
the SPM-K30)
Screw hole
(left side)
Slip one end through
the loop at the other end
Slip the safety wire
between the bracket and
the projector
Small wall mount
bracket (Type B)
Screw hole
(right side)
PREPARATIONS
➤ a Installation
En
19
1 2 3 4 5 6
5
Fit the mounting guide hooks of the small wall mount brackets
attached to the unit into the holes on the left and right sides of the
large wall mount bracket and then slide the unit to the right.
6
Align the holes in the large wall mount bracket with the holes in the
bottom of the small wall mount brackets, and then use two of the
screws (M6; supplied with the SPM-K30) to secure the unit.
Fit the hook into
the hole.
Slide the unit to the
right.
Bottom side of the unit
• Hold the unit tight with both hands when attaching or removing the unit to or from the wall. Holding the unit
loosely could cause the unit to fall, resulting in personal injury.
Screws
(M6; supplied with the
SPM-K30)
PREPARATIONS
➤ a Installation
En
20
1 2 3 4 5 6
7
Pass the screws through the loops of the safety wires and then
tighten the screws to secure the safety wires to the wall.
Washer (supplied
with the SPM-K30)
Secure the safety
wire to the wall.
Screw (available
from third-party
manufactures)
Secure the
safety wire to
the wall.
• Attach the safety wires tight.
• Keep the two other washers for future use.
PREPARATIONS
➤ a Installation
En
21
1 2 3 4 5 6
b Connecting a TV
Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit.
• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m is recommended to prevent degradation of signal quality.
• For playback of 3D and 4K video content, use a high-speed HDMI cable.
• This unit supports HDCP version 2.2, a copy protection technology. To enjoy playback of 4K video, connect the unit to the HDMI IN jack (one compatible with HDCP 2.2) on an HDCP 2.2-compliant TV.
TVs that support Audio Return Channel (ARC)
Connect the TV to the unit with an HDMI cable (not supplied).
HDMI OUT (ARC) jack
OUT
(ARC)
IN 1
(HDCP2.2)
HDMI
TVs that do not support Audio Return Channel (ARC)
Connect the TV to the unit with an HDMI cable (not supplied) and an optical cable.
HDMI OUT (ARC) jack
ARC-compatible HDMI input
HDMI
HDMI input
HDMI
HDMI
(ARC)
OUT
(ARC)
IN 1
(HDCP2.2)
HDMI
HDMI
IN 2
IN 2
IN 3
IN 3
IN 4
IN 4
HDMI
OPTICAL
HDMI
OUT
(ARC)
OUT
(ARC)
O
NETWORK
UPDATE ONLY
NETWORK
UPDATE ONLY
SYSTEM
SUBWOOFER
CONNCETOR
OUT
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
SYSTEM
SUBWOOFER
CONNCETOR
OUT
RS-232C
The unit (rear)
TV
When connecting a TV that supports Audio Return Channel (ARC), enable the HDMI
control function (p. 76).
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
The unit (rear)
1. Remove the cap
O
TV
RS-232C
TV jack
Audio output
(digital optical)
TV
2. Check the direction of
the plug
What is Audio Return Channel (ARC)?
In order for the unit to play audio from a TV, the TV must usually be connected to the unit via an audio
cable as well as an HDMI cable. If, however, the TV supports Audio Return Channel (ARC), TV audio
signals can be input to the unit via the HDMI cable that outputs video signals from the unit to the TV.
• Use an ARC-compatible HDMI cable.
• If the TV has no optical jack
Connect the audio output jack on the TV to the AUX1 (analog) input jack or AUX2 (digital coaxial) jack on
the unit, and set “TV Input” in the setup menu to “Analog [AUX 1]” or “Coaxial [AUX 2]” accordingly (p. 76).
TV audio can be played through the unit by pressing the TV key on the remote control.
PREPARATIONS
➤ b Connecting a TV
En
22
1 2 3 4 5 6
c Connecting playback devices
Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the unit. Depending on the video/audio output jacks available on your video device,
choose one of the following connections. We recommend using an HDMI connection if the video device has an HDMI output jack.
HDMI connection
Optical connection
Connect a video device to this unit via the optical cable. Next, connect the video
device’s video output to the TV’s video input.
Connect a video device to the unit with an HDMI cable (not supplied).
• This unit supports HDCP version 2.2, a copy protection technology. When using an HDCP 2.2-compliant
playback device, such as a set-top box, connect it to the unit via the HDMI IN 1 jack. When connecting
playback devices that do not support HDCP version 2.2, any HDMI IN jack (1–4) may be used.
The unit (rear)
Video device
The unit (rear)
To video output
jack
IN 1
(HDCP2.2)
IN 2
Video device
HDMI IN 1–4 jacks
IN 3
IN 1
(HDCP2.2)
IN 1
(HDCP2.2)
IN 4
HDMI
OPTICAL
OUT
(ARC)
IN 2
O
IN 3
O
IN 2
HDMI
SYSTEM
SUBWOOFER
CONNCETOR
OUT
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
OPTICAL
NETWORK
UPDATE ONLY
HDMI
IN 4
RS-232C
OUT
(ARC)
HDMI
IN 3
NETWORK
UPDATE ONLY
SYSTEM
SUBWOOFER
CONNCETOR
OUT
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
Audio output
(digital optical)
OPTICAL jack
HDMI
HDMI output
RS-232C
IN 4
1. Remove the cap
2. Check the direction of
the plug
To video input
jack
The audio/video played on the video device will be output though the unit by switching
input to HDMI 1–4 using the HDMI 1–4 key on the remote control.
• Once the HDMI control function has been activated (p. 34), video and audio content from playback devices
can be output from the TV even when this unit is off (HDMI signal pass-through).
TV
The audio played on the video device will be output though the unit by switching input
to OPTICAL using the OPTICAL key on the remote control.
• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m is
recommended to prevent degradation of signal quality.
• For playback of 3D and 4K video content, use a high-speed HDMI cable.
• When audio from the video device cannot be output via the HDMI jack, use an optical cable to connect the
video device to the unit via the digital optical output jack on the video device and the OPTICAL jack on the
unit. If the video device is connected to the unit in this way, change “Audio Assign” to “Optical” in option
menu (p. 84).
PREPARATIONS
➤ c Connecting playback devices
En
23
1 2 3 4 5 6
Coaxial connection
Analog connection
Connect a video device to this unit via a digital coaxial cable. Next, connect the video
device’s video output to the TV’s video input.
TV
The unit (rear)
Connect a video device to this unit via a stereo cable (not supplied). Next, connect the
video device’s video output to the TV’s video input.
TV
The unit (rear)
To video output jack
To video output jack
IN 1
(HDCP2.2)
IN 1
(HDCP2.2)
IN 2
IN 2
IN 3
IN 3
IN 4
IN 4
HDMI
HDMI
OUT
(ARC)
OUT
(ARC)
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
Audio output
(digital coaxial)
NETWORK
UPDATE ONLY
SYSTEM
SUBWOOFER
CONNCETOR
OUT
RS-232C
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
Audio output
(analog)
NETWORK
UPDATE ONLY
SYSTEM
SUBWOOFER
CONNCETOR
OUT
RS-232C
AUDIO
AUX1 (analog) jacks
COAXIAL
L
L
C
C
R
AUX2
AUX2 (digital
coaxial) jack
R
Video device
AUX1
L
R
R
L
To video input jack
Video device
The audio played on the video device will be output though the unit by switching input
to AUX2 using the AUX 2 key on the remote control.
To video input jack
The audio played on the video device will be output though the unit by switching input
to AUX1 using the AUX 1 key on the remote control.
PREPARATIONS
➤ c Connecting playback devices
En
24
1 2 3 4 5 6
d Other connections
Connecting a subwoofer
Using the optional wireless subwoofer kit SWK-W16
A subwoofer can be connected to the unit for use with the unit. There are two ways to
connect a subwoofer to the unit: use a third-party RCA monaural cable, or use the
optional wireless subwoofer kit SWK-W16 to connect via a wireless connection.
The optional wireless subwoofer kit SWK-W16 enables wireless connection of a
subwoofer to the unit.
Connecting a subwoofer via cable
Use a third-party RCA monaural cable to connect the subwoofer to the unit via the
monaural input jack on the subwoofer and the SUBWOOFER OUT jack on the unit.
SWK-W16
When connecting a Yamaha subwoofer equipped with a system connector, connect a
system control cable (or third-party 3.5mm monaural mini plug cable) to the SYSTEM
CONNECTOR on the unit. This connection is required to turn the unit and subwoofer on
and off at the same time.
The unit (rear)
Subwoofer
IN 1
(HDCP2.2)
Subwoofer
IN 2
IN 3
The unit and the wireless subwoofer kit are automatically connected via wireless
connection when the unit is turned on, or when subwoofer output in the setup menu is
set to “Front/Wireless”.
IN 4
HDMI
OUT
(ARC)
NETWORK
UPDATE ONLY
SYSTEM
SUBWOOFER
CONNCETOR
OUT
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
When using the wireless subwoofer kit, set subwoofer output to “Front/Wireless”
(default setting) in the setup menu (p. 73).
RS-232C
• See “Troubleshooting” (p. 90) if the indicator on the wireless subwoofer kit does not glow green.
SYSTEM
CONNECTOR
SUBWOOFER
OUT
INPUT
SYSTEM
CONNECTOR
• See the Owner’s Manual supplied with the wireless subwoofer kit SWK-W16 for information regarding
SWK-W16 and subwoofer connection.
• The wireless subwoofer kit SWK-W16 cannot be used while the subwoofer is connected to the unit via
cables.
• The SWK-W16 may not be available in some countries or regions.
When the unit is connected to the subwoofer via the cable, set the subwoofer output to
“Wired” in the setup menu (p. 73)
Wired network connections
• See documentation supplied with the subwoofer for more information.
For a wired connection, connect one end of the network cable to the NETWORK jack on
the rear panel of the unit and the other end to a router. For details, refer to
“NETWORKS” (p. 49).
PREPARATIONS
➤ d Other connections
En
25
1 2 3 4 5 6
e Connecting the power cable
After all the connections are complete, plug in the power cable.
The unit (rear)
IN 1
(HDCP2.2)
IN 2
IN 3
IN 4
HDMI
OUT
(ARC)
UPDATE ONLY
AC IN
SYSTEM
SUBWOOFER
CONNCETOR
OUT
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
RS-232C
To an AC wall outlet
PREPARATIONS
➤ e Connecting the power cable
En
26
1 2 3 4 5 6
f Initial settings
z
Displaying the menu screen on the TV
Visual operation of this unit is
possible by displaying its menu
screen on the TV.
TV remote control (example)
Turn on the unit and the TV, and
then use the input button on the
TV’s remote control to switch input
so that video input from this unit is
displayed.
OPTION (
SETUP (
)
)
Switch
input
sources
The menu display
The menu is displayed on the TV screen when the SETUP ( ) key
or OPTION ( ) key is pressed. When the TV is receiving HDMI
signals, the menu is superimposed over video content. Press the
SETUP ( ) key twice or OPTION ( ) key a second time to cancel
menu display.
Setup Menu
When this unit and the TV are
connected as shown below,
select “HDMI 1” using the TV’s
remote control.
Beam
Sound
HDMI
Display
Information
IntelliBeam
Horizontal Angle
Vertical Angle
Beam Travel Length
Focal Length
Image Location
Channel Out
Subwoofer
The unit (rear)
TV
IN 1
(HDCP2.2)
• The setup menu (p. 66) can only be displayed on a TV screen. It cannot be shown
in the front panel display.
IN 2
IN 3
IN 4
HDMI
OUT
(ARC)
NETWORK
UPDATE ONLY
SYSTEM
SUBWOOFER
CONNCETOR
OUT
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
RS-232C
1
HDMI INPUT
2
3
OUT
(ARC)
HDMI
HDMI
PREPARATIONS
➤ f Initial settings
En
27
Selecting the language for menu display
Initial screen display
When the unit is turned on for the first time after purchase, the screen below will be
displayed. (“ViewScreen” is shown in the front panel display.)
Share
Y
(
n
u
l
o
W
e
s
a
u
i
t
i
t
w
n
e
c
F
o
g
r
an
i)
rk
a
.
s
s
w
d
Wi-Fi
h
e
i
e
a
t
t
v
Settings
re the wireless
tings of the
h Sound Projector
ice with iOS7 or
1
2
3
Turn the unit and TV on.
Switch the TV’s input to display video input from this unit (p. 27).
Press and hold the SETUP (
appears on the TV.
[ENTER]:Start
[RETURN]:Cancel
[
]:OSD Language
) key until the “OSD Language” menu
OSD Language
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
ITALIANO
NEDERLANDS
РУССКИЙ
SVENSKA
TÜRK
While this screen is displayed, an iOS device (such as an iPhone) can be used to
easily connect the unit to a wireless network. See the Quick Reference Guide for
more information.
If you will not use an iOS device to connect to a wireless network, press the RETURN
( ) key.
• You can use this function to connect to a wireless network at any time by selecting “Share Wi-Fi
Settings (iOS)” from the setup menu. However, be aware that if a different wireless network, or a
Bluetooth device, has already been configured, doing so will erase any previous settings.
When the menu is not displayed
• Confirm the following cases.
• This screen will not be displayed if the unit is connected to a router via its NETWORK jack (wired
connection).
– The HDMI input jack of your TV and the HDMI OUT (ARC) jack of the unit are connected.
• Be aware that if the IntelliBeam microphone is connected while the screen shown above is displayed
(p. 29), setup will be canceled, and the screen will switch to the auto measurement screen.
– The input of your TV is set to “HDMI 1” (example).
4
Use the S/T key to select the desired language and press the
ENTER key.
Settings
, ENGLISH (default), DEUTSCH, FRANÇAIS, ESPAÑOL, ITALIANO, NEDERLANDS,
РУССКИЙ, SVENSKA, TÜRK
5
Press the SETUP (
) key to exit the setup menu.
PREPARATIONS
➤ f Initial settings
En
28
Auto setup for appropriate surround effects (IntelliBeam)
First use the “IntelliBeam” function to adjust each channel so that this unit provides the
optimal viewing and listening environment.
• Use the supplied cardboard microphone stand or a tripod to place the IntelliBeam
microphone at the same height as your ears would be when you are seated.
• Position the IntelliBeam microphone so that it is parallel with the floor.
• The AUTO SETUP procedure may not be run successfully if this unit is installed in one of the rooms
described in “Unrecommended listening environments” (p. 15).
• In order for this unit to provide the optimal listening environment, adjust each channel first using the
“IntelliBeam” function. The My Surround function can be used to enjoy rich surround sound in these types
of rooms as well. See “Channel Out” (p. 72) for more information.
IntelliBeam microphone
Within 1 m (3.3 ft)
• Do not connect the IntelliBeam microphone to an extension cable as doing so may result in an inaccurate
sound optimization.
Installing the IntelliBeam microphone
1
Within 1 m (3.3 ft)
Place the IntelliBeam microphone at your normal listening position.
❑ Assembling the supplied cardboard microphone stand
1
2
Upper limit
Center height of
this unit
3
Cardboard
microphone stand
Listening position
1.8 m (6.0 ft) or
more
Lower limit
Fit in
Remove
Fit in
Place horizontally
4
5
Center line
IntelliBeam microphone
Run through
Cardboard microphone stand
Make sure that there are no obstacles between the IntelliBeam microphone and the
walls in your listening room as these objects obstruct the path of sound beams.
However, any objects that are in contact with the walls will be regarded as a protruding
part of the walls.
PREPARATIONS
➤ f Initial settings
En
29
3
Using AUTO SETUP (IntelliBeam)
Connect the IntelliBeam microphone to the INTELLIBEAM MIC jack
of the unit.
• Test tones output during measurement are loud. Perform AUTO SETUP when no children are around and
there is no possibility of their entering the listening room, as their hearing may be impaired.
• If there are curtains in your listening room, we recommend following the procedure below.
1. Open the curtains to improve sound reflection.
2. Run “Beam optimize only” (p. 32).
3. Close the curtains.
4. Run “Sound optimize only” (p. 32).
INTELLIBEAM MIC
• Make sure that your listening room is as quiet as possible. For accurate measurement, turn off air
conditioner or other devices that make noises.
1
INTELLIBEAM MIC
Turn the unit and your TV on.
IntelliBeam microphone
• When a subwoofer is connected to the unit, turn on the subwoofer, and set the volume and crossover
frequency as shown below.
Set the volume to half
Set the crossover frequency to maximum
VOLUME
CROSSOVER
HIGH CUT
MIN
2
MAX
MIN
Cardboard microphone stand
The screen below is displayed after connecting IntelliBeam microphone to the
unit.
P
P
1
j
a
M
A
p
[
MAX
l
l
.
e
t
e
f
l
E
e
e
8
c
a
t
e
N
a
a
m
t
e
s
e
a
T
(
s
s
/
o
a
u
r
s
E
P
e
e
6
r
r
r
RE
c
p
ft
.
l
em
[E
e l
R]:
AUT
PARA
onne
lace
awa
The
evel
ent
NTER
eave
Star
O
TI
ct
t
y
MI
w
ta
]
t
t
SE
ON
t
he
fr
C
he
ke
is
he
[R
TU
&
he
M
om
sh
n
s
p
r
ET
P
C
M
IC
S
ou
se
ab
re
oo
UR
HEC
IC.
at
oun
ld
ate
out
sse
m.
N]:
K)
least
d Probe set
d.
3min.
d,
Cancel
Switch TV input to display video input from this unit (p. 27).
“AUTO SETUP” in the “IntelliBeam” menu can automatically adjust the
following two settings.
Beam optimize
only
This feature optimizes the beam angle so that the parameter best
matches your listening environment.
Sound optimize
only
This feature optimizes sound quality for each channel by measuring
the acoustic characteristics of the listening environment.
“Beam optimize only” or “Sound optimize only” can be measured separately in
the setup menu (p. 32).
• Follow the instructions below and then leave the room. If you remain in the room, you may obstruct
the beam, or the microphone may pickup any sounds you make, possibly resulting in improper
measurement.
PREPARATIONS
➤ f Initial settings
En
30
4
Press the ENTER key to start the AUTO SETUP
procedure and then leave the room within 10
seconds.
5
Press the ENTER key.
The measurement results are applied and saved in the unit.
AUTO
AUTO
Will
SETUP
begin
Please
in
leave
SETUP
COMPLETE
START
10
the
sec.
room.
----------
Please remove the MIC
from Sound Projector
and the listening position.
Press [SYSTEM MEMORY]
to save set-up in the
key
memory.
SYSTEM
MEMORY
[RETURN]:Cancel
The screen changes
automatically as measurement
progresses.
SHOW
ENTER
RETURN (
RESULT
MEASUREMENT
)
E
F
S
S
N
R
U
U
V
O
R
B
I
N
R
W
RONMENT
T
:Be
OUND :Be
OOFER:Wi
C
a
a
r
COMPLETE.
HECK:Success
m
m
ed
• You can save several measurement results by pressing
the SYSTEM MEMORY 1, 2, or 3 key.
When the SYSTEM MEMORY 1 key is pressed, “M1
Saving” is displayed, and settings are saved.
• If ambient noise is picked up after measurement begins,
an error message is displayed in the “AUTO SETUP
COMPLETE” screen prompting you to begin
measurement again. Press the ENTER key to exit the
error message screen, and begin measurement again.
[ENTER]:Save set-up.
[RETURN]:Do not save set-up.
If the AUTO SETUP procedure is complete, this unit rings
the chimes.
• See page 44 for more information on the system memory function.
• The AUTO SETUP procedure takes about 3 minutes.
• To cancel the AUTO SETUP procedure after it is started, or if you do not
want to apply the results, press the RETURN ( ) key.
• If an error occurs, an error buzzer sounds and an error message is
displayed. For details on error messages, see “If an error message is
displayed” (p. 33).
PREPARATIONS
➤ f Initial settings
En
31
6
Remove the IntelliBeam microphone.
4
The “AUTO SETUP COMPLETE” screen closes.
Press the S/T key to select one of the items below
and then press the ENTER key.
Settings
The IntelliBeam microphone is sensitive to heat, so should
not be placed anywhere where it could be exposed to direct
sunlight or high temperatures (such as on top of AV
equipment).
Beam+Sound optimize
Select this optimization feature if you make
settings for the first time. This menu takes
about 3 minutes.
Beam optimize only
Use to optimize the beam angle so that the
parameter best matches your listening
environment. This menu takes about 1
minute.
Sound optimize only
Use to optimize the beam delay, volume,
and quality so that the parameters best
match your listening environment. This
menu takes about 2 minutes.
You must optimize the beam angle with
“Beam optimize only” before starting
“Sound optimize only”. Select this
optimization feature in the following cases:
• If you have opened or closed the curtains
in your listening room before using this
unit
• If you have manually set the beam angle
with “Beam optimize only”.
INTELLIBEAM MIC
//
ENTER
SETUP (
INTELLIBEAM MIC
)
❑ AUTO SETUP via the setup menu
“Beam optimize only” or “Sound optimize only” can be measured
separately in the setup menu.
1
5
Place the IntelliBeam microphone at your normal
listening position, and press the SETUP ( ) key.
See “Installing the IntelliBeam microphone” (p. 29) for
instructions on positioning the IntelliBeam microphone.
2
Press the S/T key to select “Beam” and then press
the ENTER key.
3
Press the S/T key to select “IntelliBeam” and then
press the ENTER key.
Connect the IntelliBeam microphone to this unit
after “AUTO SETUP (PREPARATION & CHECK)”
screen is displayed.
For details on connecting IntelliBeam microphone, refer to
“Using AUTO SETUP (IntelliBeam)” (p. 30).
6
Follow steps 4, 5, and 6 under “Using AUTO SETUP
(IntelliBeam)” to configure settings, and then
remove the microphone.
• When the AUTO SETUP procedure is performed from the setup menu, the menu
selection screen of the setup menu appears. Press the SETUP ( ) key twice to
exit the setup menu.
PREPARATIONS
➤ f Initial settings
En
32
❑ If an error message is displayed
If an error message is displayed on the TV screen, see “Error messages” below to determine the cause and resolve the problem. Follow the instructions displayed on the TV screen
to begin measurement again.
Error messages
Error message
Cause
Remedy
Turn off devices, such as an air condition, that make noise, or
move the unit away from such devices.
ERROR E-1
Please test in quieter environment.
There is too much noise in your listening room.
You may want to choose certain hours during the day when
there is not much noise coming from outside.
Connect the IntelliBeam microphone to the INTELLIBEAM
MIC jack on the front of this unit and begin measurement
again.
ERROR E-2
No MIC detected. Please check MIC connection and re-try. The IntelliBeam microphone is disconnected.
ERROR E-3
Unexpected control is detected. Please re-try.
Some other operations were performed on this unit.
Begin measurement again. Do not perform any other
operations with this unit during measurement.
ERROR E-4
Please check MIC position. MIC should be set in front of
Sound Projector. Please re-try.
The IntelliBeam microphone is not placed in front of this unit.
Position the IntelliBeam microphone in front of this unit and
begin measurement again.
ERROR E-5
Please check MIC position. MIC should be set above 1.8m/ The IntelliBeam microphone is not placed in the right distance
6.0ft and re-try.
from this unit.
ERROR E-6
Volume level is lower than expected. Please check MIC
position/connection and re-try.
The IntelliBeam microphone cannot collect the sound
produced by this unit.
Position the IntelliBeam microphone properly, check the
connection, and then begin measurement again.
ERROR E-7
Unexpected error happened. Please turn off and re-try.
An internal system error occurred.
Press the z key to turn off this unit, then run AUTO SETUP
procedure again after turning this unit on.
ERROR E-9
Please check the connection with subwoofer.
The subwoofer output signals cannot be recognized.
Confirm the connection between the wireless subwoofer kit
and subwoofer (p. 25), and begin measurement again.
Position the IntelliBeam microphone at a distance of more
than 1.8 m (6.0 ft) from this unit and begin measurement
again.
PREPARATIONS
➤ f Initial settings
En
33
Operating the unit by TV’s remote control (HDMI control)
In addition to the functions in the left column, the unit’s menus displayed on the TV can
be operated with some TV.
What is the HDMI control function?
HDMI control allows you to operate external devices via HDMI. If you connect a TV that
supports HDMI control to the unit with an HDMI cable, you can control the unit (such as
power and volume) with TV remote control operations. You can also control playback
devices (such as HDMI control-compatible BD/DVD players) connected to the unit with
an HDMI cable.
• Even if your TV supports the HDMI control function, some functions may not be available. For details, refer
to documentation supplied with your TV.
• We suggest using devices (TV, BD/DVD player, etc.) from the same manufacturer.
Coordinated functions via the TV remote control
Remote control of TV (Example)
1. Turn on/off
Both the TV and this unit turn on/off at the same time.
2. Switch input sources
• The unit’s input source switches accordingly when the TV’s input
source is switched.
Examples
– When a TV program is selected on the TV, the unit’s audio input
source is switched to the HDMI OUT (ARC) jack using the ARC
function or TV jack.
– When a Blu-ray disc player connected to the HDMI IN 1 jack on the
unit is selected, the unit’s input source also switches to HDMI 1.
• The input source can be switched while the unit is off.
3. Switch the audio output device
(TV or this unit (amplifier))
4. Adjust volume
This unit's volume can be adjusted when the TV’s audio output is set
to this unit (amplifier).
5. HDMI signal pass-through
HDMI input signals are output from the HDMI OUT (ARC) jack. Video and audio contents from an
HDMI input source are output from the TV when the unit is turned off.
6. ARC function
Audio signals output from the HDMI (ARC) jack on the TV can be input to the HDMI OUT (ARC)
jack on the unit (p. 22).
PREPARATIONS
➤ f Initial settings
En
34
Setting the HDMI control function
z
HDMI 1
1
2
Turn on the unit, TV, and playback devices.
If devices are not coordinated
Confirm the settings are properly configured as described
below.
– “HDMI Control” (p. 76) is set to “On” in the setup menu.
Activate the HDMI control function on the unit, TV,
and playback devices such as BD/DVD players that
support this function.
– The HDMI control function is enabled on the TV.
The example of TV settings
• From the setup menu on your TV, select “Link setting” “HDMI control setting”, then set a setting such as “HDMI
control function” to “ON”.
For this unit, set “HDMI Control” to “On”. The default setting
is “Off” (p. 76).
For playback devices, refer to documentation supplied with
each device.
3
• Set audio output to any option other than TV.
Turn off the main power of the TV and then turn off
the unit and playback devices.
If devices fail to coordinate even after the settings described
above have been applied correctly:
4
Turn on the unit and playback devices and then turn
on the TV.
– Disconnect the power cable of the unit and external devices
connected to the unit via HDMI cable. Plug them in again after
about 30 seconds.
5
Switch the TV input to display the video from the
unit.
– If devices fail to coordinate after OPTICAL, AUX1, or AUX2 is
input, repeat steps 5 and 6 under “Setting the HDMI control
function”.
6
Select HDMI 1-4 as an input source and confirm that
the video of the playback device is displayed on the
TV.
When the playback device is connected to the HDMI IN 1
jack, press the HDMI1 key.
HDMI1
7
Input source name
Check that the unit is properly coordinated with the
TV by turning off the TV or adjusting the TV volume
with the TV remote control.
– Turn off this unit and the TV, and then turn them back on again.
Changing the connection method and
connected devices
When changing connected devices, or the jacks via which devices
are connected, reconfigure settings as follows.
1
Disable the HDMI control function of the TV and BD/
DVD player, turn off all connected devices, and
change the connections.
2
Perform steps 1 to 7 of “Setting the HDMI control
function”.
PREPARATIONS
➤ f Initial settings
En
35
PLAYBACK
z
Basic operation for playback
NET
Input selector
keys
1
2
SUB (+/-)
3
VOL (+/-)
MUTE (
)
Press the z key to turn on this unit.
5
Turn on devices (TV, BD/DVD player, game console,
etc.) connected to this unit.
• When audio is output from both TV speaker and this unit,
mute the TV sound.
Select a device by pressing the input selector key or
NET key corresponding to the connection of
external devices.
• When sound input to HDMI IN jack is output from the TV,
the volume level does not change even if you press the
VOL (+/-) key or the MUTE ( ) key.
Press the HDMI1 key to play audio/video content from a
BD/DVD player connected via the HDMI IN1 jack.
HDMI1
• To mute the sound, press the MUTE ( ) key. “MUTE
ON” is shown in the front panel display. To resume the
volume, press the MUTE ( ) key again or press VOL (+/
-) key. “MUTE OFF” is shown in the front panel display.
Input source name
For playback from a Bluetooth device, refer to p. 45. For
audio playback via a network, refer to p. 60 to 65.
4
Press the VOL (+/-) key to adjust the volume. Press
the SUB (+/-) key to adjust the volume of the
subwoofer.
• The subwoofer volume can be adjusted separately from the whole volume.
• Lowering the subwoofer volume is recommended at night.
Play back a device selected in step 3.
6
Select 3D surround playback, surround playback,
stereo playback, or target playback mode, and
configure sound setting according to your
preferences (p. 37).
Press the z key to turn off this unit after use.
PLAYBACK
➤ Basic operation for playback
En
36
Enjoying sound based on your preference
This unit supports the following capabilities to enjoy sound based
on your preference.
Playback with 3D surround sound
• 3D surround playback mode
In addition to 5-channel sound beams used for surround sound
playback in the horizontal direction, surround sound can be heard
from above by directing two sound beams (from height channels)
upward and reflecting them off the ceiling. Compared to surround
sound playback in only the horizontal direction, this gives the
sound field (spatial expression with sounds) a greater sense of
immersion and reality.
• Surround playback mode (p. 38)
• CINEMA DSP (p. 38)
• Stereo playback mode (p. 40)
• Target playback mode (p. 40)
• Compressed Music Enhancer (p. 41)
• CLEAR VOICE (p. 41)
• Volume adjustment for each channel (p. 42)
3D SURROUND
Sound beams in the horizontal direction
Sound beams output from height channels
Channels created from the front and rear sound
beams (p. 72)
1
Press the 3D SURROUND key to switch to 3D
surround mode.
“3D SUR.” is shown in the front panel display.
3D SUR.
• Configuring Channel Out settings (p. 72) in the setup menu allows for more
precise configuration of beam settings in accordance with the audio source and
listening room setup.
PLAYBACK ➤ Enjoying sound based on your preference
En
37
Playback with surround sound
5-channel sound beams create a sound field for surround sound
playback without using height channel sound beams.
Enjoying three-dimensional surround
sound (CINEMA DSP 3D/CINEMA DSP)
Select the desired CINEMA DSP program according to the audio
source and your preferences. Yamaha’s exclusive sound field
reproduction technology (CINEMA DSP 3D/CINEMA DSP) easily
reproduces realistic sound fields comparable to those found in
movie theaters and concert halls, allowing users to enjoy a natural
and three-dimensional listening environment.
Sound fields are reproduced using CINEMA DSP 3D for 3D
surround sound playback, and CINEMA DSP for surround sound
playback. The same programs can be selected for both CINEMA
DSP 3D and CINEMA DSP.
1
Sound beams
Channels created from the front and rear sound
beams (p. 72)
CINEMA DSP
SURROUND
1
Press the SURROUND key to switch to surround
mode.
“SURROUND” is shown in the front panel display.
Press the CINEMA DSP (MOVIE, MUSIC, or
ENTERTAINMENT) key repeatedly to select the
desired program.
The CINEMA DSP program name appears in the front
panel display.
• The CINEMA DSP programs are not available in the following conditions.
– In stereo playback mode (p. 40) or target playback mode (p. 40)
– When using My Surround function (p. 73).
SURROUND
• Configuring Channel Out settings (p. 72) in the setup menu allows for more
precise configuration of beam settings in accordance with the audio source and
listening room setup.
• Use 3D surround sound playback mode for playback of audio fed via height
channels such as with Dolby Atmos.
• This unit automatically memorizes the settings assigned to each input source.
When you select another input, the unit automatically recalls the last settings for
the selected input.
CINEMA DSP 3D
In addition to two-dimensional sound fields reproduced with
standard CINEMA DSP, CINEMA DSP 3D applies measured
three-dimensional sound field data, including vertical directional
information, for reproduction of three-dimensional sound fields.
PLAYBACK ➤ Enjoying sound based on your preference
En
38
❑ CINEMA DSP 3D/CINEMA DSP options
ENTERTAINMENT (use the ENTERTAINMENT key to select)
MOVIE (use the MOVIE key to select)
Sci-Fi
This program clearly reproduces dialogs and special
sound effects of the latest science fiction films and lets
you feel a broad and expansive cinematic space.
Adventure
This program reproduces the thrilling environment of the
latest action films and lets you feel the dynamic and
excitement of fast-moving scenes.
Spectacle
This program reproduces the wide and grand
environment and lets you have added impressions on
spectacular scenes with strong visual impacts.
Sports
This program reproduces the energetic environment of
live sports broadcasting, converging a commentator’s
voice on the center and broadening the overall
atmosphere of the stadium, and lets you feel as if you are
seated at an actual stadium or a ball park.
Talk Show
This program reproduces excitement of live talk shows. It
enhances the ambience of gaiety while keeping the
conversations at a comfortable volume.
Drama
This program stables reverberations that match a wide
range of movie genres from serious dramas to musicals
and comedies, and offers an optimum 3D feeling,
reproducing effects tones and background music softly
but cubically around clear words.
Game
This program is suitable for role-playing and adventure
games. It utilizes the sound field effects for movies to
represent the depth and spatial feeling of the field during
play, while offering movie-like surround effects in the
movie scenes in the game.
MUSIC (use the MUSIC key to select)
CINEMA DSP
Music Video
This program produces a vibrant environment and lets
you feel as if you are at an actual jazz or rock concert.
Concert
This program creates a rich surround effect of a large
round concert hall with a great deal of presence,
emphasizing the extension of sounds, and lets you feel as
if you are seated close to the center of the stage.
Jazz Club
This program recreates the acoustic environment of “The
Bottom Line”, a famous jazz club in New York once and
lets you feel as if you are seated right in front of the stage.
Playback without using CINEMA DSP (press the OFF key)
DSP Off
Audio content is played in 3D surround mode or surround
mode when CINEMA DSP is not used.
PLAYBACK ➤ Enjoying sound based on your preference
En
39
2-channel playback (stereo playback mode)
For clear sound at a distance
2-channel stereo playback using the right front and left front
channels is enabled. When multi-channel audio signals are input,
they are down-mixed to 2 channels.
1
Press the STEREO key to switch to stereo playback
mode.
Play an input source, and adjust the beam angle.
1
2
Press the TARGET key.
Use the W/X key to adjust beam angle.
The angle to the left increases by 2 degrees each time the
W key is pressed; the angle to the right increases by 2
degrees each time the X key is pressed.
/
A maximum angle of 90 degrees in either direction is
possible.
Beam angle adjusted 16 degrees to the left
3D SURROUND
SURROUND
STEREO
TARGET
Delivering sound to a specified location
(target playback mode)
Target playback mode outputs sound beams from a single channel
for optimal listening from a specific position.
Refer to the illustrations below.
TARGET L16
Disabling target playback mode
Press the 3D SURROUND key, SURROUND key, or STEREO key to
turn target playback mode off.
For listening at low volumes, such as at night
• The CINEMA DSP programs are not enabled in target playback mode.
• Bass output is controlled to prevent sounds from spreading in other directions.
PLAYBACK ➤ Enjoying sound based on your preference
En
40
Playing back digitally compressed formats
(such as MP3, etc.) with enriched sound
(Compressed Music Enhancer)
Play back digitally compressed formats such as MP3, with
emphasis on bass and treble for extended dynamic sounds.
1
Clear playback of human voices
(CLEAR VOICE)
Human voices, such as lines in movies and TV shows, or news and
sports commentary, are played back very clearly.
1
Press the ENHANCER key to turn on the
Compressed Music Enhancer function.
Press the CLEAR VOICE key to turn on the CLEAR
VOICE function.
Press the key again to turn off the function.
Press the key again to turn off the function.
DIALOG LIFT
• Compressed Music Enhancer is disabled when digital audio signal with a
sampling rate greater than 48 kHz is input.
• By default, this function is set to “ON” when the input source is Bluetooth. It is set
to “OFF” with any other input source.
• This unit automatically memorizes the “ON” and “OFF” settings assigned to each
input source. When you select another input, the unit automatically recalls the last
settings for the selected input.
Adjusting the position from which dialog is
heard (Dialog Lift)
When dialog sounds like it is coming from below the TV screen,
adjust the position upward so that it sounds as if it is coming from
the center of the TV screen.
1
Press the DIALOG LIFT key.
The current setting is displayed.
ENHANCER
Dlg.Lift 0
CLEAR VOICE
Display changes as follows each time the DIALOG LIFT key
is pressed.
0 (default) 1 2 3 0...
3
2
1
0
• The dialog lift function can be used with 3D surround sound playback and
surround sound playback (other than My Surround playback).
PLAYBACK ➤ Enjoying sound based on your preference
En
41
Adjusting volume for each channel
Adjust the volume of playback for each channel (audio in each
direction) so that sounds are evenly distributed in their respective
directions.
Example of volume balance
• If you have problems hearing words: Select C (center) to increase the level.
When the sound is not like surround sound: Select SL (surround left), SR
(surround right), HL (height left) or HR (height right) to increase the level.
• The volume of the subwoofer also can be adjusted by using the SUB (+/-) key.
• Refer to “Channel Level” (p. 74) when adjusting the volume of each channel with
the test sound.
1
Press the CH LEVEL key to select adjustable
channel from the followings.
FL: Front left
SUB (+/-)
FR: Front right
FL
FR
C
C: Center
SW
HL
SL: Surround left
/
HR
SR: Surround right
HL: Height left
SL
SR
HR: Height right
SW: Subwoofer
• Adjusting the channel level is not available in target playback mode.
CH LEVEL
• SW (subwoofer) volume can only be adjusted in stereo playback mode
(p. 40).
• Volume for the following channels can be adjusted when “My Surround” is
set to “On” (p. 73).
C: Center
SL/SR: Surround (left/right)
SW: Subwoofer
2
Press the S/T key to adjust the volume.
Adjustable range: -20 to +20
PLAYBACK ➤ Enjoying sound based on your preference
En
42
Using useful features
ECO
Saving energy with the Eco function
Input: Name of the input source
Using the Eco function to reduce the amount of power consumed
by this unit.
When this function is enabled, the brightness of the front panel
display is minimized and the maximum volume is reduced.
1
(“BLUETOOTH”, or the name of the connected
device, is displayed with Bluetooth input.)
T
Beam: Playback mode
Press the ECO key.
T
“ECO ON” is displayed and the front panel display turns off.
Decoder: Current decoder (p. 75)
T
ECO ON
Cinema DSP: CINEMA DSP program (p. 38)
T
The brightness of STATUS indicator is minimized.
INFO (
)
Disabling the Eco function
SUB Status: Subwoofer status
T
Press the ECO key.
“ECO OFF” is displayed in the front panel display.
• Display in playback mode (Beam)
– 3D SUR.: Playback in 3D surround mode (p. 37)
• Disable this function for louder playback.
– SURROUND: Playback in surround mode (p. 38)
• When this function is enabled, “Dimmer” in the setup menu (p. 77) and “MAX
VOLUME” in the advanced setup menu (p. 86) cannot be configured.
– MY SUR.: Playback using the My Surround function (p. 73)
– STEREO: Stereo playback (p. 40)
– TARGET: Playback in target playback mode (p. 40)
Switching information displayed in the
front panel display
• Subwoofer status display (SUB Status)
– Wireless: The unit is connected to the wireless subwoofer kit (p. 25).
– None: No subwoofer is connected to the unit.
– Wired: When “Bass Out” in the setup menu is set to “Wired” (p. 73).
Information regarding the input source, surround sound, and
subwoofer is displayed.
1
Press the INFO (
) key.
Display changes as follows each time the INFO ( ) key is
pressed. The information varies according to the input
source.
PLAYBACK ➤ Using useful features
En
43
Saving this unit’s settings to system memory
Three sets of settings can be saved to this unit’s memory, enabling
quick loading of settings optimized for specific listeners or
environmental changes as needed. Refer to the examples below to
save IntelliBeam measurement results and settings such as
surround setting to system memory, or to load a pre-defined
settings.
• 3D surround playback (p. 37), surround playback (p. 38), stereo
playback (p. 40), or target playback mode (p. 40)
(The Channel Out settings (p. 72) can also be saved for 3D
surround/surround playback mode.)
• Surround: CINEMA DSP 3D/CINEMA DSP (p. 38)
• Tone control (p. 84)
SYSTEM
MEMORY
Example 1 Saving the IntelliBeam measurements for different
environments to system memory
If materials that absorb sound, such as curtains, obstruct sound
beams, the effectiveness of those beams decreases. Measure with
the curtains open and again with them closed. Save both sets of
settings to SYSTEM MEMORY 1 and 2, and load the appropriate
settings as needed.
• Subwoofer settings (p. 73)
Saving settings to system memory
1
Hold down the SYSTEM MEMORY 1, 2, or 3 key until
“M1 Save?”, “M2 Save?”, or “M3 Save?”,
corresponding to the button pressed, is displayed.
2
Press the same SYSTEM MEMORY key again.
Example 2 Saving frequently used settings to system memory
SYSTEM MEMORY 1: Surround setting
SYSTEM MEMORY 2: A target playback mode setting that
projects sound beams toward the kitchen
When the SYSTEM MEMORY 1 key is pressed, “M1
Saving” is displayed, and settings are saved.
SYSTEM MEMORY 3: A target playback mode setting that
projects sound beams toward the living
room
• If system settings are already stored in the selected memory number, this
unit overwrites the old settings.
• The memory function cannot be set when “MEMORY PROTECT” is set to
“ON” in the advanced setup menu (p. 85).
Example 3 Saving preferred listener settings to system
memory
SYSTEM MEMORY 1: Settings configured for Dad
Loading settings
SYSTEM MEMORY 2: Settings configured for Mom
SYSTEM MEMORY 3: Settings configured for parties
1
The following settings can be saved to system memory.
If the SYSTEM MEMORY 1 key is pressed, “M1 Load?” will
be displayed.
• IntelliBeam measurement results (p. 30)
See page 32 for instructions on saving measurement results for
IntelliBeam.
(When “Horizontal Angle”, “Vertical Angle”, “Beam Travel Length”,
“Focal Length”, “Image Location”, and “Channel Level” are
configured in the setup menu (p. 66), these settings are applied
to IntelliBeam’s AUTO SETUP measurements.)
Press the SYSTEM MEMORY 1, 2, or 3 key
corresponding to settings to be loaded.
2
Press the same SYSTEM MEMORY key again.
When the SYSTEM MEMORY 1 key is pressed, “M1
Loading” is displayed, and settings are loaded.
PLAYBACK ➤ Using useful features
En
44
Wireless playback of audio via Bluetooth connection
The unit can be used to receive and play audio from a Bluetooth device, and to transmit
audio for playback on a Bluetooth device.
See documentation supplied with your Bluetooth device for more information.
• Audio cannot be received by the unit from mobile devices and the like, and transmitted to speakers or
headphones at the same time.
❑ Receiving audio from a Bluetooth device
• “Bluetooth” in the setup menu must be set to “On” (default; p. 82) to use Bluetooth functions.
Audio from a Bluetooth device, such as a mobile device or a digital music player, can
be played over a wireless connection.
• A Bluetooth device that has been assigned a passkey (PIN) other than “0000” cannot be connected to the
unit.
• The unit can connect to up to 20 Bluetooth devices for receiving and transmitting audio. If a new device is
successfully connected to the unit after 20 other devices have already been connected, the device
information with the earliest connection date (the first device connected) will be erased to make room for
the new device.
• Be sure that the Bluetooth device is no farther than 10 m (33 ft.) from the unit when connecting the two.
• Refer to “Bluetooth” (p. 94) in “Troubleshooting” if a Bluetooth connection cannot be established.
The unit
• Adjust Bluetooth device volume as needed.
Bluetooth device (such as a
mobile device)
❑ Transmitting audio to a Bluetooth device
Use Bluetooth wireless headphones and the like to listen to audio.
The unit
Bluetooth speakers/
headphones
PLAYBACK
➤ Wireless playback of audio via Bluetooth connection
En
45
Listening to music from a Bluetooth device (Receiving)
1
Press the
The
indicator in the front panel display flashes while the
unit and Bluetooth device are being connected, and glows
steadily when the connection is established.
key on the remote control.
Bluetooth is selected as an input source, and
“BLUETOOTH” is shown in the front panel display.
BLUETOOTH
Flashes while
processing a
connection
“Connect” is shown in the front panel display.
• If a Bluetooth device has been connected before, the unit will connect to the
last connected device when the
key is pressed. Terminate this
connection to connect a new device.
• If you are unable to select Bluetooth as an input source, be sure that
“Transmission” in the setup menu is set to “Off” (p. 82)
2
Turn on the Bluetooth function on the Bluetooth
device.
Glows when the
connection is
established
The
indicator or a completion message is displayed on
the Bluetooth device.
4
Play back a song on the Bluetooth device.
The operation varies depending on the device. Refer to
documentation supplied with the device.
3
Select “YSP-5600” in the Bluetooth device list on
the device.
If a passkey (PIN) is required, enter the number “0000”.
• With some Bluetooth devices, this unit must be specified as the destination for
audio output.
PIN 0 0 0 0
YSP-5600
1
4
7
2
5
8
0
• Setting “Network Standby” in the setup menu to “On” allows the unit to be turned
on and off with Bluetooth device operations (p. 81).
3
6
9
PLAYBACK
➤ Wireless playback of audio via Bluetooth connection
En
46
Terminating Bluetooth connection
Bluetooth connection is terminated in the following cases.
The
indicator on the unit’s front panel turns off when the
connection is terminated.
• The Bluetooth function is turned off on the Bluetooth device.
• The
key is pressed for more than 3 seconds.
• The unit is turned off.
• When Bluetooth connection is terminated, “Disconnected” is shown in the front
panel display.
PLAYBACK
➤ Wireless playback of audio via Bluetooth connection
En
47
Listening to audio through Bluetooth speakers or headphones (transmitting)
The
indicator in the front panel display flashes while the
unit and Bluetooth device are being connected, and glows
steadily when the connection is established.
• Music input using AirPlay cannot be output to Bluetooth devices.
Input selector
keys
1
2
3
Turn on the Bluetooth device.
Select the input source (other than Bluetooth) with
the input selector keys.
Press the SETUP (
Flashes while
processing a
connection
) key twice.
“Completed” is shown in the front panel display.
The setup menu is displayed on the TV screen.
/
ENTER
SETUP (
)
Glows when the
connection is
established
4
Use the S/T keys to select “Bluetooth”, and then
press the ENTER key.
5
Use the S/T keys to select “Transmission”, and
then press the ENTER key.
6
Use the S/T keys to select “On”, and then press
the ENTER key.
7
Use the S/T keys to select “Device Search”, and
then press the ENTER key.
8
Use the S/T keys to select a Bluetooth device, and
then press the ENTER key.
9
Play an audio source, and enjoy music via the
Bluetooth device.
• “Not found” is displayed on the screen with step 8 if the unit was unable to find a
device to which to connect.
• “No Device Name” replaces the device name on the screen with step 8 if the unit
is unable to recognize the name of the device.
• Audio will also be output from the unit.
Terminating Bluetooth connection
Bluetooth connection is terminated in the following cases.
Device
▲
A
F
a
f
▼
B
G
b
g
C
H
c
h
D
I
d
i
E
J
e
j
The
indicator on the unit’s front panel turns off when the
connection is terminated.
• The connection is terminated from the Bluetooth device, or
the Bluetooth device is turned off.
Search
• “Transmission” in the setup menu is set to “Off”.
1
2
3
4
• The unit is turned off.
[ENTER]:Confirm
[RETURN]:Cancel
PLAYBACK
➤ Wireless playback of audio via Bluetooth connection
En
48
NETWORKS
Network functions
Network connection allows you to listen to Internet radio stations or music streaming
services, and play music files with AirPlay or your computer (media service) via this
unit.
Depending upon the input source, the mobile app, MusicCast CONTROLLER, may be
required. Playback that requires the MusicCast CONTROLLER is indicated with the
icon.
• See our website for more information on the MusicCast CONTROLLER app.
• The input source switches automatically when music is played over a network. Use the NET key to switch to
a different input source. The input source changes as follows each time the NET key is pressed.
X SERVER
X NET RADIO
X AirPlay
X Music streaming service
(if available)
X MusicCast Link
• Playing music files stored on media servers or mobile devices
PC or DNLA-compatible NAS
AirPlay
Mobile devices
•
Listening to Internet radio
p. 60
p. 63
p. 65
p. 61
Internet radio stations can be selected once they are registered with the unit.
•
Transmit and receive audio to/from other MusicCast-enabled devices
connected to your home network.
Refer to the supplied “MusicCast Setup Guide” for details.
NETWORKS
➤ Network functions
En
49
Connecting to a network
You can choose between wired network connection and wireless network connection depending upon your network environment.
• Some security software installed on your computer, or network device settings (such as a firewall), may
block the unit’s access to your computer or Internet radio stations. Should this occur, change security
software and/or network device settings.
• If your router supports DHCP, network settings for the unit need not be configured. Network parameters
(such as the IP address) will be assigned automatically. If your router does not support DHCP, or if you
prefer to configure network parameters manually, you must configure network settings yourself (p. 80).
• A network connection cannot be established if the MAC address filter on your router is enabled. Check your
router’s settings.
• You can verify that network parameters (such as the IP address) have been properly assigned to the unit by
selecting “Information” (p. 78) from the setup menu.
• To configure your router’s subnet mask manually, apply the same subnet used by this unit to all devices.
• Use of a broadband connection is recommended when using Internet services.
Does the router support a wireless
connection?
Yes
Do you use the dedicated app,
MusicCast CONTROLLER, on
your mobile device?
No, or a wired connection is preferred.
Use a wired network.
p. 51
Yes
Refer to the supplied “MusicCast Setup Guide”.
If the connection was not successful...
No, not sure yet
Is your iOS device running iOS
7.1 or later?
Yes
Wireless network (sharing iOS device settings)
Use an iOS device (such as an iPhone) to apply network settings (p. 52).
If the connection was not successful...
No, not sure yet
Is your wireless router equipped
with a WPS button?
Wireless network (using the MusicCast CONTROLLER app)
Yes
Wireless network (using the WPS button)
If the connection was
not successful...
Use the WPS button on your wireless router (access point) (p. 53).
No, not sure yet
Does your wireless router
support entry of a WPS PIN
code?
Yes
Wireless network (using the WPS PIN code)
Register the unit’s PIN code with your wireless router (access point) (p. 57).
If the connection was not successful...
No, not sure yet
Wireless network (searching for an access point)
Select an access point from a list of available access points (p. 53).
Wireless connection fails, or no access point is displayed.
If the connection was not successful...
Wireless network (configuring a wireless connection manually)
Enter required information, such as the SSID, manually (p. 55).
NETWORKS ➤ Connecting to a network
En
50
Wired network connections
Wireless network
To use a wired network connection, connect the unit to a router via an STP network
cable (category 5 or higher straight cable; not supplied).
Connect the unit to a wireless router (access point).
Internet
Network Attached Storage
(NAS)
Wireless router
(access point)
Internet
Modem
WAN
LAN
Modem
PC
The unit
Mobile device
Network cable
Router
Mobile device
The
indicator on the front panel glows when the unit is connected to a wireless
network.
IN 1
(HDCP2.2)
IN 2
NETWORK
IN 3
IN 4
HDMI
Glows (green)
OUT
(ARC)
NETWORK
UPDATE ONLY
SYSTEM
SUBWOOFER
CONNCETOR
OUT
R
AUX1
L
AUX2
TV
OPTICAL
IR-IN
IR-OUT
RS-232C
The unit (rear)
• You cannot use the wireless network connection simultaneously with the wired network connection (p. 51)
or Wireless Direct (p. 58).
• If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless
router (access point). In such case, place them close to each other.
• If the unit is already connected to a wireless network and you would like to switch to a wired connection,
change “Network” in the setup menu to “Wired”.
• If the unit will not be connected to a wireless router (access point), Wireless Direct (p. 58) can be used to
connect the unit directly to a mobile device to control the unit using the HOME THEATER CONTROLLER
(WLAN) app installed on that mobile device.
NETWORKS ➤ Connecting to a network
En
51
Sharing the iOS device setting
z
7
You can easily setup a wireless connection by applying the
connection settings on iOS devices (such as an iPhone).
Use the S/T keys to select “Share Wi-Fi Settings
(iOS)”, and then press the ENTER key.
Wireless(Wi-Fi)
Before proceeding, confirm that your iOS device is connected to a
wireless router (access point).
S
·
·
·
·
·
• You need iOS device with iOS 7.1 or later.
e
W
S
A
M
P
l
P
h
c
a
I
e
S
a
c
n
N
ct
B
re
es
ua
C
• The connection settings on iOS devices cannot be applied to the unit to establish
a wireless connection if your wireless router (access point) uses WEP encryption.
See “Searching for a wireless router (access point)” (p. 53) to establish a
connection.
1
2
/
ENTER
SETUP ( )
RETURN ( )
3
Press the z key to turn on this unit.
8
I
f
i
·
·
·
f
o
n
N
N
A
i
·B
The setup menu is displayed on the TV screen.
Use the S/T keys to select “Network”, and then
press the ENTER key.
5
Use the S/T keys to select “Network Connection”,
and then press the ENTER key.
6
Use the S/T keys to select “Wireless (Wi-Fi)”, and
then press the ENTER key.
s
o
o
e
e
n
F
i
t
tup
method.
i Settings
nt Scan
ting
(iOS)
When the following screen is displayed, press the
ENTER key.
) key twice.
4
t
i
P
S
e
[ENTER]:OK
[RETURN]:Cancel
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 27).
Press the SETUP (
a
ut
W
s
l
od
l
i
e
E
l
n
l
S
S
l
t
t
T
l
f
u
h
h
o
i
w
a
a
w
a
o
p
m
or
et
r
r
i
l
r
r
u
m
o
e
i
n
i
k
e
s
a
o
[
[R
Wing i
g se
zed.
set
sets
ic s
tion
th s
ENTE
ETUR
Fi Settings
s begun, the
ttings will be
tings
ervice
account
ettings
R]:Start
N]:Cancel
• The settings to be deleted (initialized) will be displayed. If you do not want to
delete these settings, press the RETURN ( ) key to terminate the
connection.
9
When the following screen is displayed, press the
ENTER key.
Network Connection
Share
Wired
Wireless(Wi-Fi)
Wireless Direct
M
c
n
W
y
a
o
e
i
o
k
n
t
u
Wi-Fi
e sure your i
nected to you
work, and the
Fi settings s
r iOS device.
Settings
OS device is
r Wi-Fi
n open the
creen of
[ENTER]:Confirm
[RETURN]:Cancel
NETWORKS ➤ Connecting to a network
En
52
10 Display the Wi-Fi setup screen on the iOS device
z
and select the unit from “SETUP A NEW AIRPLAY
SPEAKER...”.
• “WPS Button” under “Wireless (Wi-Fi)” in the setup menu can also be used to
configure a connection using the WPS button. Follow the on-screen instructions.
Follow the on-screen instructions displayed on the iOS
device.
Wireless(Wi-Fi)
S
·
·
·
·
·
Using the WPS push button configuration
You can easily set up a wireless connection with one push of the
WPS button on the wireless router (access point).
1
2
/
ENTER
SETUP (
WPS
e
S
a
c
n
N
ct
B
re
es
ua
C
a
ut
W
s
l
od
t
i
P
S
e
s
o
o
e
e
n
F
i
t
tup
method.
i Settings
nt Scan
ting
(iOS)
[ENTER]:OK
[RETURN]:Cancel
About WPS
Press and hold the WPS key on the remote control
for at least 3 seconds.
WPS (Wi-Fi Protected Setup) is a standard established by the
Wi-Fi Alliance, which allows easy establishment of a wireless
home network.
Searching for a wireless router (access
point)
• To cancel configuration, press any key other than the WPS key.
3
l
P
h
c
a
I
Press the z key to turn on this unit.
“Press WPS button on Access Point” will be displayed in the
front panel display.
)
e
W
S
A
M
P
Push the WPS button on the wireless router (access
point).
When a connection has been established, “Completed” will
be displayed in the front panel display.
If “NotConnect” is displayed, repeat the procedure from
step 1 again, or see the information below to try another
connection method.
Find and connect to a nearby wireless router (access point).
1
2
Press the z key to turn on this unit.
3
Press the SETUP (
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 27).
) key twice.
The setup menu is displayed on the TV screen.
• The WPS button cannot be used to establish a wireless connection if your
wireless router (access point) uses WEP encryption, or if the router’s MAC
address filter is enabled. See “Searching for a wireless router (access point)”
(p. 53) to establish a connection.
4
Use the S/T keys to select “Network”, and then
press the ENTER key.
• The WPS button cannot be used to establish a wireless connection if your
wireless router (access point) is configured so that it does not broadcast its SSID.
See “Setting up the wireless connection manually” (p. 55) to establish a
connection.
5
Use the S/T keys to select “Network Connection”,
and then press the ENTER key.
NETWORKS ➤ Connecting to a network
En
53
6
Use the S/T keys to select “Wireless (Wi-Fi)”, and
then press the ENTER key.
Network Connection
security key.
Wired
Wireless(Wi-Fi)
Wireless Direct
7
9 Press the ENTER key.
10 Use the W/X/S/T and ENTER keys to enter the
Use the S/T keys to select “Access Point Scan”,
and then press the ENTER key.
*
(
.
0
A
N
a
n
S
O
C
****_
) [
, :
1 2
B C
O P
b c
o p
pace
K
ANCEL
]
;
3
D
Q
d
q
{
_
4
E
R
e
r
BK
}
|
5
F
S
f
s
SP
<
/
6
G
T
g
t
>
\
7
H
U
h
u
DE
*
$
8
I
V
i
v
LE
!
~
9
J
W
j
w
TE
?
^
@
K
X
k
x
#
'
+
L
Y
l
y
CL
%
"
M
Z
m
z
EA
&
`
=
←
→
R
Wireless(Wi-Fi)
S
·
·
·
·
·
///
ENTER
SETUP ( )
e
W
S
A
M
P
l
P
h
c
a
I
e
S
a
c
n
N
ct
B
re
es
ua
C
a
ut
W
s
l
od
t
i
P
S
e
s
o
o
e
e
n
F
i
t
tup
method.
i Settings
nt Scan
ting
(iOS)
[ENTER]:OK
[RETURN]:Cancel
The list of available access points appears on the TV
screen.
8
Use the S/T keys to select the desired access point
and press the ENTER key.
The wireless connection setting screen appears on the TV.
Access
▲
SSID
:
Security:
Security K
:
Connect
▼
[ENT
[RETU
Point
Access
Scan
Point
WPA2-PSK(AES)
ey
ER]:Confirm
RN]:Cancel
1
[]/[]: Move the cursor left and right.
[Space]: Enter a space.
[BKSP]: Delete the character to the left of the selected one.
[DELETE]: Delete the selected character.
[CLEAR]: Delete all characters entered.
[CANCEL]: Cancel character entry, and return to the previous screen.
Once the security key been entered, select “OK”, and then
press the ENTER key. The screen will return to that
displayed in step 8.
11 Use the S/T keys to select “Connect” and press the
ENTER key to start the connection process.
When a connection has been established, “Completed” will
be displayed on the TV screen.
If “Not connected” is displayed press the ENTER key to
repeat the process beginning with step 6, or see the
information below to try another connection method.
• “Access Point Scan” cannot be used to establish a wireless connection if
your wireless router (access point) is configured so that it does not
broadcast its SSID. See “Setting up the wireless connection manually”
(p. 55) to establish a connection.
12 Press the SETUP (
) key to exit the setup menu.
NETWORKS ➤ Connecting to a network
En
54
Setting up the wireless connection
manually
z
Use the S/T keys to select “SSID”.
Manual
Setup the SSID (network name), encryption method and security
key for your network manually.
▲
SSID
1
2
Press the z key to turn on this unit.
Security:
Security K
:
Connect
▼
[ENT
[RETU
3
Press the SETUP (
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 27).
) key twice.
The setup menu is displayed on the TV screen.
///
ENTER
SETUP ( )
8
4
Use the S/T keys to select “Network”, and then
press the ENTER key.
5
Use the S/T keys to select “Network Connection”,
and then press the ENTER key.
6
Use the S/T keys to select “Wireless (Wi-Fi)”, and
then press the ENTER key.
Network Connection
Wired
Wireless(Wi-Fi)
Wireless Direct
7
Use the S/T keys to select “Manual Setting”, and
then press the ENTER key.
e
W
S
A
M
P
l
P
h
c
a
I
e
S
a
c
n
N
ct
B
re
es
ua
C
a
ut
W
s
l
od
t
i
P
S
e
s
o
o
e
e
n
F
i
t
tup
method.
i Settings
nt Scan
ting
[ENTER]:OK
[RETURN]:Cancel
:
None
ey
ER]:Confirm
RN]:Cancel
Use the W/X/S/T keys and the ENTER key to enter
the SSID of the access point.
a
(
.
0
A
N
a
n
S
O
C
bc_
) [
, :
1 2
B C
O P
b c
o p
pace
K
ANCEL
]
;
3
D
Q
d
q
{
_
4
E
R
e
r
BK
}
|
5
F
S
f
s
SP
<
/
6
G
T
g
t
>
\
7
H
U
h
u
DE
*
$
8
I
V
i
v
LE
!
~
9
J
W
j
w
TE
?
^
@
K
X
k
x
#
'
+
L
Y
l
y
CL
%
"
M
Z
m
z
EA
&
`
=
←
→
R
[]/[]: Move the cursor left and right.
[Space]: Enter a space.
[BKSP]: Delete the character to the left of the selected one.
[DELETE]: Delete the selected character.
[CLEAR]: Delete all characters entered.
[CANCEL]: Cancel character entry, and return to the previous screen.
Once the security key been entered, select “OK”, and then
press the ENTER key. The screen will return to that
displayed in step 8.
10 Use the S/T keys to select “Security” and the W/X
keys to select the encryption method.
Wireless(Wi-Fi)
S
·
·
·
·
·
9
Setting
(iOS)
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
• As communications are not encrypted when “None” is selected, selecting
this option poses the risk that third parties may access the unit without your
permission.
NETWORKS ➤ Connecting to a network
En
55
11 Use the S/T keys to select “Security Key” and
press the ENTER key.
ENTER key to start the connection process.
When a connection has been established, “Completed” will
be displayed on the TV screen.
• If you select “None” in step 10, this item is not available.
12
13 Use the S/T keys to select “Connect” and press the
Use the W/X/S/T and ENTER keys to enter the
security key.
If you select “WEP” in step 10, enter either 5 or 13
character string, or 10 or 26 hexadecimal (base 16) keys.
If “Not connected” is displayed press the ENTER key to
repeat the process beginning with step 6.
14 Press the SETUP (
) key to exit the setup menu.
If you select the method other than “WEP”, enter either 8 to
63 character string, or 64 hexadecimal (base 16) keys.
///
ENTER
SETUP ( )
• Hexadecimal (base 16) keys use combinations of the numbers 0 through 9
and the letters a through f. Letters are not case sensitive.
*
(
.
0
A
N
a
n
S
O
C
****_
) [
, :
1 2
B C
O P
b c
o p
pace
K
ANCEL
]
;
3
D
Q
d
q
{
_
4
E
R
e
r
BK
}
|
5
F
S
f
s
SP
<
/
6
G
T
g
t
>
\
7
H
U
h
u
DE
*
$
8
I
V
i
v
LE
!
~
9
J
W
j
w
TE
?
^
@
K
X
k
x
#
'
+
L
Y
l
y
CL
%
"
M
Z
m
z
EA
&
`
=
←
→
R
[]/[]: Move the cursor left and right.
[Space]: Enter a space.
[BKSP]: Delete the character to the left of the selected one.
[DELETE]: Delete the selected character.
[CLEAR]: Delete all characters entered.
[CANCEL]: Cancel character entry, and return to the previous screen.
Once the security key been entered, select “OK”, and then
press the ENTER key. The screen will return to that
displayed in step 8.
NETWORKS ➤ Connecting to a network
En
56
8
Using the WPS PIN code
z
Register the unit’s PIN code with your wireless router (access point)
to establish a connection. This procedure applies if your wireless
LAN router (access point) supports the WPS PIN feature.
1
2
Press the z key to turn on this unit.
3
Press the SETUP (
Use the S/T keys to select the desired access point
and press the ENTER key.
The PIN code of the unit appears on the TV screen.
PIN
PIN
E
i
P
t
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 27).
n
n
r
h
ter
to t
ess
e co
Code
Code:00000000
t
h
E
n
he PI
e acc
NTER
necti
N cod
ess p
to st
on pr
e
oint.
art
ocess.
[ENTER]:Start
[RETURN]:Cancel
) key twice.
The setup menu is displayed on the TV screen.
///
ENTER
SETUP ( )
4
Use the S/T keys to select “Network”, and then
press the ENTER key.
5
Use the S/T keys to select “Network Connection”,
and then press the ENTER key.
6
Use the S/T keys to select “Wireless (Wi-Fi)”, and
then press the ENTER key.
Network Connection
Wired
Wireless(Wi-Fi)
Wireless Direct
7
Use the S/T keys to select “PIN Code”, and then
press the ENTER key.
Wireless(Wi-Fi)
S
·
·
·
·
·
e
W
S
A
M
P
l
P
h
c
a
I
e
S
a
c
n
N
ct
B
re
es
ua
C
a
ut
W
s
l
od
t
i
P
S
e
s
o
o
e
e
n
F
i
t
tup
Enter the unit’s PIN code into the wireless router
(access point).
For details on settings, refer to documentation supplied with
the wireless router (access point).
10 Press the ENTER key to start the connection
process.
When a connection has been established, “Completed” will
be displayed on the TV screen.
If “Not connected” is displayed press the ENTER key to
repeat the process beginning with step 6, or see the
information below to try another connection method.
• The PIN code cannot be used to establish a wireless connection if your
wireless router (access point) uses WEP encryption, or if the router’s MAC
address filter is enabled. See “Searching for a wireless router (access
point)” (p. 53) to establish a connection.
11 Press the SETUP (
method.
i Settings
nt Scan
ting
9
) key to exit the setup menu.
(iOS)
[ENTER]:OK
[RETURN]:Cancel
The list of available access points appears on the TV
screen.
NETWORKS ➤ Connecting to a network
En
57
Connecting a mobile device to the unit directly (Wireless Direct)
z
Connect a mobile device directly to the unit without using a wireless
router (access point).
4
Use the S/T keys to select “Network”, and then
press the ENTER key.
5
Use the S/T keys to select “Network Connection”,
and then press the ENTER key.
6
Use the S/T keys to select “Wireless Direct”, and
then press the ENTER key.
Wireless Direct supports the following.
– Operation of the unit using a mobile device to which the
dedicated MusicCast CONTROLLER or HOME THEATER
CONTROLLER (WLAN) app has been installed.
– Use of AirPlay to play music files stored on an iOS device.
Network Connection
Wired
Wireless(Wi-Fi)
Wireless Direct
///
ENTER
SETUP ( )
The unit
Mobile device
7
• You cannot use Wireless Direct simultaneously with the wired network connection
(p. 51) or the wireless network connection (p. 51).
Settings
None, WPA2-PSK (AES)
• When Wireless Direct is enabled, the unit cannot connect to the Internet.
Therefore, you cannot use any kind of Internet service such as Internet radio.
1
2
3
Use the S/T keys to select “Security” and the W/X
keys to select the encryption method.
In most cases, “WPA2-PSK (AES)” should be selected. If
your mobile device does not support “WPA2-PSK (AES)”,
select “None”.
Press the z key to turn on this unit.
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 27).
Press the SETUP (
• As communications are not encrypted when “None” is selected, selecting
this option poses the risk that third parties may access the unit without your
permission.
) key twice.
The setup menu is displayed on the TV screen.
8
Use the S/T keys to select “Security Key” and
press the ENTER key.
• If you select “None” in step 7, this item is not available.
NETWORKS ➤ Connecting to a network
En
58
9
Use the W/X/S/T and ENTER keys to enter the
security key.
Enter either 8 to 63 character string, or 64 hexadecimal
(base 16) keys.
• Hexadecimal (base 16) keys use combinations of the numbers 0 through 9
and the letters a through f. Letters are not case sensitive.
*
(
.
0
A
N
a
n
S
O
C
///
ENTER
SETUP ( )
****_
) [
, :
1 2
B C
O P
b c
o p
pace
K
ANCEL
]
;
3
D
Q
d
q
{
_
4
E
R
e
r
BK
}
|
5
F
S
f
s
SP
<
/
6
G
T
g
t
>
\
7
H
U
h
u
DE
*
$
8
I
V
i
v
LE
!
~
9
J
W
j
w
TE
?
^
@
K
X
k
x
#
'
+
L
Y
l
y
CL
%
"
M
Z
m
z
EA
&
`
=
←
→
R
10 Use the S/T keys to select “Save” and press the
ENTER key to save the setting.
This completes the settings and “Set the mobile device.”
will be displayed on the TV screen. The unit functions as an
access point.
Next, configure the Wi-Fi settings of a mobile device.
11 Configure the Wi-Fi settings of a mobile device.
For details on settings of your mobile device, refer to
documentation supplied with the mobile device.
a Enable the Wi-Fi function on the mobile device.
b Select the SSID displayed in step 9 from the list of available
access points.
c When you are prompted for a password, enter the security key
displayed in step 9.
[]/[]: Moves the cursor left and right.
[Space]: Enter a space.
[BKSP]: Delete the character to the left of the selected one.
[DELETE]: Delete the selected character.
[CLEAR]: Delete all characters entered.
[CANCEL]: Cancel character entry, and return to the previous screen.
12 Press the SETUP (
) key to exit the setup menu.
Once the security key been entered, select “OK”, and then
press the ENTER key. The screen below will be displayed.
Wireless
▲
SSID
:
Security:
Security K
:
Save
▼
[ENT
[RETU
Direct
YSP-5600
XXXXXX
WPA2-PSK(AES)
ey
*************
ER]:Confirm
RN]:Cancel
• Before proceeding to the next step, record the following information. These
information will be needed to configure the Wi-Fi setting of a mobile device.
– SSID displayed on the TV screen
– Security key you have just entered
NETWORKS ➤ Connecting to a network
En
59
Playing back music stored on media servers (PCs/NAS)
You can play back music files stored on your PC or DLNA-compatible NAS on the unit.
Media sharing setup
To play back music files stored on your PC or DLNA-compatible NAS, first you need to
• To use this function, the unit and your PC must be connected to the same router (p. 50). You can check
whether the network parameters (such as the IP address) are properly assigned to the unit in “Information”
(p. 78) in the setup menu.
configure the media sharing setting on each music server.
• The audio may be interrupted while using the wireless network connection. In this case, use the wired
network connection.
• The following file formats are supported.
– The unit supports playback of WAV (PCM format only), AIFF, MP3, WMA, MPEG-4 AAC, FLAC and
ALAC (Apple Lossless Audio Codec) files (1- or 2-channel audio only).
– The unit is compatible with sampling rates of up to 192 kHz for WAV, AIFF and FLAC files, 96 kHz for
ALAC files, and 48 kHz for other files.
– The unit supports gapless playback of WAV, FLAC and ALAC files.
– To play back FLAC files, you need to install server software that supports sharing of FLAC files via DLNA
on your PC or use a NAS that supports FLAC files.
– Digital Rights Management (DRM) contents cannot be played back.
For a PC with Windows Media Player installed
This unit supports Windows Media Player 11 or later. This section explains Windows
Media Player 12 setup as an example.
1
2
3
4
Start Windows Media Player 12 on your PC.
5
Click “OK” to exit.
Select “Stream”, then “Turn on media streaming”.
Click “Turn on media streaming”.
Select “Allowed” from the drop-down list next to the unit’s model
name.
For a PC or a NAS with other DLNA server software
installed
Refer to documentation supplied with the device or software and configure the media
sharing settings.
Playing music files
Use the MusicCast CONTROLLER app installed on your mobile device to play music
files.
• Configure basic settings for the MusicCast CONTROLLER app before playing music files.
• Refer to the supplied “MusicCast Setup Guide” for details.
NETWORKS
➤ Playing back music stored on media servers (PCs/NAS)
En
60
Listening to Internet radio
NET RADIO
1-3
You can listen to Internet radio stations from all over the world.
• To use this function, the unit must be connected to the Internet (p. 50). You can check whether the network parameters (such as the IP address) are properly assigned to the
unit in “Information” (p. 78) in the setup menu.
• You may not be able to receive some Internet radio stations.
• The unit uses the vTuner Internet radio station database service. This service may be discontinued without notice.
Playback of Internet radio
Registering favorite Internet radio stations
Use the MusicCast CONTROLLER app installed on your mobile
device to select an Internet radio station.
Assign Internet radio stations to the NET RADIO keys on the remote
control, or save them in the vTuner Bookmarks folder.
Assigning a station to a NET RADIO key
• Configure basic settings for the MusicCast CONTROLLER app before selecting
an Internet radio station.
• Refer to the supplied “MusicCast Setup Guide” for details.
1
2
Select the desired Internet radio station.
Press and hold one of the NET RADIO keys (1–3) for
at least 3 seconds.
❑ Tuning into assigned Internet radio stations
1
Press the NET RADIO key (1–3) to which the desired
Internet radio station has been assigned.
“NET RADIO” is shown in the front panel display, and
streaming begins.
NETWORKS ➤
Listening to Internet radio
En
61
Registering the station on the vTuner website
You can also register your favorite Internet radio stations on the vTuner website.
1
Select any of Internet radio stations on the unit.
This operation is necessary to register the radio station for the first time.
2
Check the vTuner ID of the unit.
You can find the vTuner ID in “Information” (p. 78) in the setup menu.
3
Access the vTuner website (http://yradio.vtuner.com/) with the web
browser on your PC and enter the vTuner ID.
You can switch the language.
Enter the vTuner ID in this area.
• To use this feature, you need to create your personal account. Create your account using your e-mail
address.
4
Register your favorite radio stations.
Click the “Add” icon (
) next to the station name.
• To remove the station from the “Bookmarks” folder, select “Bookmarks” in the Home screen, and then
click the “Remove” icon (
) next to the station name.
NETWORKS ➤
Listening to Internet radio
En
62
Playing back music with AirPlay
The AirPlay function allows you to play back iTunes or iPod music on the unit via
network.
Playback of iTunes/iPod music contents
Follow the procedure below to play back iTunes/iPod music contents on the unit.
• This section describes “iPod touch”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod touch”,
“iPhone” and “iPad”, unless otherwise specified.
1
Turn on the unit, and start iTunes on the PC or display the playback
screen on the iPod.
If the iTunes/iPod recognizes the unit, the AirPlay icon (
) appears.
iTunes
iTunes (example)
iPod iOS7/iOS8 (example)
iPod iOS6 (example)
(wired or
wireless)
(wired or
wireless)
Router
The unit
• If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly.
2
On the iTunes/iPod, click (tap) the AirPlay icon and select the unit
(network name of the unit) as the audio output device.
iPod
iTunes (example)
• To use this function, the unit and your PC or iPod must be connected to the same router (p. 50). You can
check whether the network parameters (such as the IP address) are properly assigned to the unit in
“Information” (p. 78) in the setup menu.
• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to
connect. Connect the unit and iPod to the same SSID.
iPod (example)
YSP-5600 XXXX
YSP-5600 XXXX
Network name of the unit
• The AirPlay function can be used with an iPhone, iPad, or iPod touch running iOS 4.3.3 or later, a Mac
running OS X version 10.8 “Mountain Lion” or later, or a Windows computer with iTunes 10.2.2 or later
installed.
NETWORKS ➤
Playing back music with AirPlay
En
63
3
Select a song and start playback.
To operate playback, use the Music app on the iPod or iTunes on the PC.
“AirPlay” is shown in the front panel display, and playback begins.
• You can turn on the unit automatically when starting playback on iTunes or iPod by setting “Network
Standby” (p. 81) in the setup menu to “On”.
• You can edit the network name (the unit’s name on the network) displayed on iTunes/iPod in “Network
Name” (p. 81) in the setup menu.
• You can adjust the unit’s volume from the iTunes/iPod during playback.
Caution
• When you use iTunes/iPod controls to adjust volume, the volume may be unexpectedly loud. This could
result in damage to the unit or speakers. If the volume suddenly increases during playback, stop
playback on the iTunes/iPod immediately.
NETWORKS ➤
Playing back music with AirPlay
En
64
Playing back music stored on mobile devices
Use this function to play music stored on your mobile device over a network.
Using a mobile device to play songs
Use the MusicCast CONTROLLER app installed on your mobile device to operate
playback.
Router
(wired or wireless)
• Configure basic settings for the MusicCast CONTROLLER app before playing music.
• Refer to the supplied “MusicCast Setup Guide” for details.
The unit
Caution
• When you use mobile device controls to adjust volume, the volume may be unexpectedly loud. This
could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop
playback on the mobile device immediately.
Mobile device
• To use this function, the unit and your PC or mobile device must be connected to the same router (p. 50).
You can check whether the network parameters (such as the IP address) are properly assigned to the unit
in “Information” (p. 78) in the setup menu.
• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to
connect. Connect the unit and mobile device to the same SSID.
NETWORKS
➤ Playing back music stored on mobile devices
En
65
SETTINGS
Setup menu
A variety of settings for this unit can be specified and adjusted from the setup menu. Among the options available are the sound beam output
method for optimal surround sound effects, channel volume control, and HDMI settings.
The setup menu is displayed on, and operated from, the TV screen (it cannot be displayed in the front panel display). See “Displaying the
menu screen on the TV” (p. 27) for instructions on displaying the setup menu on the TV.
Setting the setup menu
1
///
ENTER
SETUP ( )
RETURN ( )
Press the SETUP (
2
) key.
The menu changes as follows each time the SETUP (
key is pressed.
)
Press the S/T key to select a menu and then press
the ENTER key or X key.
Repeat these steps to display the desired menu.
T
Setup Menu
Configure “Beam”, “Sound”, “HDMI”, “Display”, and
“Information”.
Beam
Sound
HDMI
Display
Information
T
Configure “Network” and “Bluetooth”.
T
Exit the setup menu.
Press the W key or RETURN (
previous menu.
Setup Menu
Beam
Sound
HDMI
Display
Information
• Hold down the SETUP (
screen (p. 28, 77).
IntelliBeam
Horizontal Angle
Vertical Angle
Beam Travel Length
Focal Length
Image Location
Channel Out
Subwoofer
IntelliBeam
Horizontal Angle
Vertical Angle
Beam Travel Length
Focal Length
Image Location
Channel Out
Subwoofer
) key to return to the
3
Press the S/T key to change the setting value of
each menu.
4
Press the SETUP (
menu.
) key again to exit the setup
) key to display “OSD Language” directly on the
• If an update for the unit’s firmware is available, an envelope icon (
displayed in the setup menu (p. 87).
) will be
SETTINGS ➤ Setup menu
En
66
Setup menu list
Menu
Settings
Beam+Sound optimize
Page
32
Beam optimize only
Optimizes the sound beam settings automatically.
32
Sound optimize only
Optimizes the sound settings automatically.
32
Horizontal Angle
Front L, Front R, Center, Surround L, Surround R
Adjust horizontal sound beam angle.
69
Vertical Angle
Front L, Front R, Center, Surround L, Surround R,
Height L, Height R
Adjust vertical sound beam angle.
69
Beam Travel Length
Front L, Front R, Center, Surround L, Surround R,
Height L, Height R
Adjust sound beam travel length.
70
Focal Length
Front L, Front R, Center, Surround L, Surround R,
Height L, Height R
Adjust sound beam focal length.
70
IntelliBeam
Beam
Function
Optimizes the sound beam and sound settings automatically.
Image Location
Channel Out
Adjustment, Left, Right
Adjusts the sound position of the front right and left channels.
71
Front
Specify the output method for the front channels.
72
Surround Back
Specify whether or not there are surround back channels.
72
My Surround
Enable/disable the My Surround function.
73
Bass Out
Specify whether or not the subwoofer is used and how it is connected.
73
Cross Over
Specify the upper limit of audio frequencies output from the subwoofer.
73
Subwoofer
Distance
Specify the distance from the subwoofer to the listening position.
73
Pairing
Manually pair the unit with the wireless subwoofer kit.
73
Front L, Front R, Center, Surround L, Surround R,
Height L, Height R, Subwoofer
Adjusts the volume of each channel.
74
Choose whether or not dynamic range is adjusted based on this unit’s volume level.
74
Specify dynamic range.
75
Specify the DTS decoder.
75
HDMI Control
Turn HDMI control on or off.
76
HDMI Audio Out
Choose whether HDMI audio input is played via this unit or the TV.
76
TV Input
Select the TV input jack from TV (digital optical) jack, AUX1 (analog) jack, and
AUX2 (digital coaxial) jack.
76
Channel Level
Sound
Adaptive DRC
Dynamic Range
DTS
HDMI
Neural:X, Dialog Control
SETTINGS ➤ Setup menu
En
67
Menu
Display
Information
Network
Settings
Function
Page
Dimmer
Adjust the brightness of the front panel display and indicators.
77
OSD Language
Changes the language used for menus displayed on the TV screen.
77
Distance Unit
Specify units used for length and distance in menus.
77
Audio
Display audio input signal information.
78
Video
Display video input signal information.
78
System
Display this unit’s firmware version.
78
Information
Display the unit’s network information.
79
Network Connection
Select the network connection method.
79
80
IP Address
DHCP, IP Address, Subnet Mask, Default
Gateway, DNS Server (P), DNS Server (S)
Configure the network parameters (such as IP address).
MAC Address Filter
Filter, MAC Address 1–10
Set the MAC address filter to limit access to the unit from other network devices.
80
Network Standby
Enable/disable the function that turns on the unit from other network devices.
81
Network Name
Edit the network name (the unit’s name on the network) displayed on other network
devices.
81
Update the firmware via the network.
81
Bluetooth
Enable/disable the Bluetooth functions.
82
Transmission
Turn the function that transmits audio to a Bluetooth device, such as Bluetooth
speakers, on or off.
82
Device Search
Search for the Bluetooth device, such as Bluetooth speakers, to which audio will be
transmitted.
82
MAC Address
Display the MAC address for the Bluetooth connection.
82
Network Update
Perform Update
Bluetooth
SETTINGS ➤ Setup menu
En
68
Beam
When “AUTO SETUP” in the “IntelliBeam” menu (p. 30) is used, recommended beam settings are automatically applied by this unit. However, “Horizontal Angle”, “Vertical Angle”,
“Beam Travel Length”, “Focal Length” (except “Center”), and “Image Location” settings can later be fine-tuned.
The output method for each channel can also be specified in “Beam” menu.
• When manually adjusting sound beams for the front channels, set “Front” for “Channel Out” to “Beam”. Adjustment is not possible if “Front” is set to “Stereo”.
Horizontal Angle
➜
Setup Menu
Vertical Angle
Beam
➜
Horizontal Angle
Setup Menu
➜
Beam
➜
Vertical Angle
Adjust the horizontal angle of sound beams for each channel using test tones.
Adjust the vertical angle of sound beams for each channel using test tones.
Adjust toward L (left) to move the direction of the output to the left and adjust toward R
(right) to move it to the right.
Adjust upward to move output direction up, and adjust downward to move output
direction down.
Beam angle
Angle to
left
Angle to
right
Settings
Front L, Front R, Center, Surround L,
Surround R
S Upward
Adjustable range
-45° to +45° (default: 0° (horizontal))
T Downward
Settings
Front L, Front R, Center, Surround L, Surround R
S Upward T Downward
Settings
Height L, Height R
Adjustable range
L90° to R90°
Left
Right
W key:
Increase angle.
X key:
Increase angle.
X key:
Decrease angle.
W key:
Decrease angle.
Adjustable range
+30° to +90°
SETTINGS ➤ Setup menu
En
69
Beam Travel Length
Setup Menu
➜
Beam
Focal Length
➜
Beam Travel Length
Specify the distance that sound beams travel for each channel. The distance starts at
this unit, ends at the listening position, and includes refraction off a wall and ceiling.
The audio delay is adjusted and sound from each channel arrives at the listening
position simultaneously.
Setup Menu
➜
➜
Beam
Focal Length
Expand the optimal listening area (sweet spot).
The illustration below shows how output from all channels is once concentrated in a
focal point and then expanded from that point. Apply negative (-) values to broaden the
sweet spot, or positive (+) values to narrow the sweet spot.
Settings
Front L, Front R, Center, Surround L, Surround R, Height L, Height R
Adjustable range
0.3 m to 24.0 m (1.0 ft to 80.0 ft)
Focal
length
Focal
point
The length of each
arrow indicates the
beam travel length.
Sweet
spot
Settings
Front L, Front R, Surround L, Surround R, Height L, Height R
• Configure this setting only when you have adjusted “Horizontal Angle” or “Vertical Angle”.
Adjustable range
-1.0 m to +13.0 m (-3.5 ft to +43.5 ft)
Setting
Center
Adjustable range
-1.0 m to +13.0 m (default: -0.5 m) (-3.5 ft to +43.5 ft (default: -1.5 ft))
SETTINGS ➤ Setup menu
En
70
We recommend using the default setting (-0.5 m or -1.5 ft) for “Center”.
Example
Left front channel
With positive focal
lengths
Center channel
With negative focal
lengths
Image Location
➜
Setup Menu
−
↑
0
↓
+
Beam
➜
Image Location
If sound from the left and right channels is unnatural, first adjust the volume of each
channel (p. 42, 74).
If this does not resolve the problem, adjust left- and right-channel image location.
Use to adjust the direction from which the front left and right channel sound is heard so
that each sound can be heard closer to the center channel.
❑ Adjustment
Settings
• “AUTO SETUP” (p. 30) automatically enables a range for optimal listening (sweet spot) that is broader than
the width of this unit.
Off (default)
No adjustments are made.
On
Choose “Left” or “Right” to adjust the direction from which sound is heard.
❑ Left
The higher the percentage, the louder the output from the center channel.
Once “Adjustment” has been set to “On”, this setting can be selected.
Adjustable range
0% (default) to 95%
Sound from the left front
channel is unnatural
With the left front channel
adjusted
SETTINGS ➤ Setup menu
En
71
❑ Right
Settings
The higher the percentage, the louder the output from the center channel.
Once “Adjustment” has been set to “On”, this setting can be selected.
Adjustable range
0% (default) to 95%
Sound from the right front
channel is unnatural
Beam
Sound beams are output from the left front, right front, and center channels.
This setting is effective for creating sound fields greater than the dimensions of
the actual listening room for playback of movies and the like.
Stereo
No sound beams are output from the left front, right front, and center channels.
Front channel audio comes from the direction of the screen. Therefore, this
setting is effective for enjoying music content such as live music videos.
With the right front channel
adjusted
• This setting is not available when “My Surround” is selected.
• When manually adjusting sound beams for the front channels, set “Front” to “Beam”. Adjustment is not
possible if “Front” is set to “Stereo”.
❑ Surround Back
Specify whether or not surround back channels are present.
FL: Front L
Channel Out
FL
FR
FL
C
Setup Menu
➜
Beam
➜
FR: Front R
C: Center
SL: Surround L
Channel Out
Specify the output method for each channel.
FR
C
SL
❑ Front
SR
None
SL
SR
SBL
SBR
SR: Surround R
SBL: Surround back L
SBR: Surround back R
Yes
Specify whether sound beams or normal sounds are output from the front channels.
Settings
To output sound beams
None
Sounds are played back without using surround back channels. Left and right
surround channel audio is played back using sound beams that come from
behind the listening position.
Yes
Sounds are played back using surround back channels. Left and right surround
back channel audio is played back using sound beams that come from behind
the listening position. Left and right surround channel audio is output using both
sound beams that come from the front channels and from behind the listening
position. This allows sounds to be heard from the sides of the listening position
as well.
Auto (default)
Automatically select whether or not surround back channels are used based on
the number of channels used for playback of the selected input source.
To output stereo sounds
SETTINGS ➤ Setup menu
En
72
❑ My Surround
Specify whether or not “My Surround” is enabled to reproduce a sense of surround
sound even in a room not suitable for surround sound playback using sound beams.
Subwoofer
Setup Menu
Settings
Off (default)
My Surround is disabled.
On
“My Surround” is enabled. Enjoy playing audio with a good sense of surround
sound even in an environment where surround sound playback using sound
beams does not provide sufficient surround sound effects.
Press the 3D SURROUND key or the SURROUND key on the remote control for
playback using the My Surround function.
➜
➜
Beam
Subwoofer
Specify whether or not the subwoofer will be used, how it will be connected, and its
distance to the listening position.
❑ Bass Out
Specify whether or not the subwoofer will be used and how it is connected.
Settings
• To use “My Surround”, establish the listening position directly in front of the unit for a greater sense of
surround sound.
Front/Wireless
(default)
Select when the subwoofer will not be used, or when the wireless subwoofer kit
will be used.
Wired
Select when the subwoofer is connected to the unit with a cable.
• When “My Surround” is set to “On”, CINEMA DSP is disabled.
❑ Cross Over
• When “My Surround” is set to “On”, Dolby Atmos playback or playback using height channels is not
possible.
Specify the upper limit of audio frequencies output from the subwoofer (the lower limit
of audio frequencies output from the unit).
Settings
80 Hz, 100 Hz (default), 120 Hz
❑ Distance
Specify the distance from the subwoofer to the listening position.
Adjustable range
0.3 m (1.0 ft) to 15.0 m (50.0 ft) (default: 2.5 m (8.5 ft))
❑ Pairing
Manually pair the unit with the wireless subwoofer kit.
After “Pairing” is selected, press the PAIRING button on the wireless subwoofer kit for
three seconds.
• “Pairing” can be selected when “Bass Out” is set to “Front/Wireless”.
SETTINGS ➤ Setup menu
En
73
Sound
Channel Level
Setup Menu
Adaptive DRC
➜
Sound
➜
Channel Level
Adjust the volume of each channel to balance output levels. Use test sounds output
from each channel to adjust volume for optimal balance.
Settings
Front L, Front R, Center, Surround L, Surround R, Height L, Height R, Subwoofer
Adjustable range
-20 to +20
➜
Setup Menu
➜
Sound
Adaptive DRC
Adjust this unit’s volume and dynamic range for optimal balance. When “On” is
selected, dynamic range is adjusted as follows for optimal listening at low volumes,
such as might be used at night.
When the volume level is low:
Narrow the dynamic range. Loud sound is played back softer, and soft sound which is
hard to be listened to is played back louder.
When the volume level is high:
• When “My Surround” of “Channel Out” is set to “On” the following items can be configured (p. 73).
Widen the dynamic range. For both soft and loud sounds, source sound is played back
without adjusting volume.
– Center
Output level
– Subwoofer
On
Off
Output level
– Surround L/R
Input level
On
Off
Input level
Volume: low
Volume: high
Settings
Off
The dynamic range is not adjusted automatically.
On (default)
Adjust the dynamic range automatically.
• When set to “On”, “Dynamic Range” is automatically set to “Max”.
SETTINGS ➤ Setup menu
En
74
❑ Dialog Control
Dynamic Range
Setup Menu
➜
Increase the volume of dialog to make listening easier.
Sound
➜
Dynamic Range
Adjustable range
0 (default) to 6 (dB)
Adjust this unit’s dynamic range (difference between maximum and minimum volumes).
• This setting is effective only for playback of DTS:X input sources that support dialog control.
Settings
Min/Auto
Min: Sets dynamic range at a level that supports comfortable listening at low
volumes.
Auto: Sets dynamic range in accordance with information received from input
signal.
Standard
The dynamic range recommended for regular home use.
Max (default)
Outputs sound without adjusting the dynamic range of the input signals.
“Neural:X” and “Dialog Control” may be provided with a firmware update.
See our website for the latest information.
The following settings are available for the DTS decoder before “Neural:X”
and “Dialog Control” are provided with firmware update.
Configure the DTS Neo:6 decoder for use when DTS audio signals are input.
• “Adaptive DRC” is automatically set to “Off” when the settings other than “Max” is selected.
DTS
Setup Menu
➜
Sound
➜
Settings
Neo:6 Cinema
(default)
Use the DTS Neo:6 decoder suitable for movies.
Neo:6 Music
Use the DTS Neo:6 decoder suitable for music.
DTS
Configure the DTS decoder for use with input of DTS audio signals.
• The DTS Neo:6 decoder is disabled with stereo playback and target playback.
❑ Neural:X
Specify whether or not Neural:X is used to generate channels not present in input
sources.
Settings
Disable
Neural:X will not be used.
Enable (default)
Neural:X will be used.
• Neural:X is the DTS:X surround sound decoder.
SETTINGS ➤ Setup menu
En
75
HDMI
Use to configure the settings related to HDMI signals and the HDMI control function.
HDMI Control
Setup Menu
TV Input
➜
HDMI
➜
HDMI Control
Turn HDMI control (p. 34) on or off.
Off (default)
Disable the control function. The standby power consumption of this unit
decreases.
On
Enable the control function.
HDMI
➜
TV Input
Settings
Optical [TV] (default), Analog [AUX1], Coaxial [AUX2]
• If this unit’s input source is switched to “Coaxial [AUX2]”:
HDMI Audio Out
This setting can be configured only when “HDMI Control” is set to “Off”.
➜
➜
If your TV is not ARC compatible (or if the ARC feature has been disabled), TV audio is
input via the TV (digital optical) jack (default). This unit’s input source can be changed
to the AUX2 (digital coaxial) jack or AUX1 (analog) jack.
Settings
Setup Menu
Setup Menu
HDMI
➜
Audio is input from the device (TV) connected to the AUX2 (digital coaxial) jack on this unit when the TV
key is pressed. Audio is input from the device connected to the TV (digital optical) jack on this unit when the
AUX2 key is pressed.
• If this unit’s input source is switched to “Analog [AUX1]”:
HDMI Audio Out
Use to select a device to play back HDMI audio signals.
Audio is input from the device (TV) connected to the AUX1 (analog) jack on this unit when the TV key is
pressed. Audio is input from the device connected to the TV (digital optical) jack on this unit when the AUX1
key is pressed.
Settings
AMP (default)
Play back the input sound signal.
TV
Plays audio content from the TV connected to the HDMI OUT (ARC) jack.
• When “HDMI Control” is set to “On”, select the audio output device based on the settings configured for the
TV connected to this unit.
• HDMI video signals input to one of the HDMI IN jacks of this unit are always output from the HDMI OUT
(ARC) jack of this unit.
SETTINGS ➤ Setup menu
En
76
Display
Dimmer
• Hold down the SETUP (
➜
Setup Menu
Display
➜
Dimmer
Adjust the brightness of the front panel display and indicators. The smaller the value,
the dimmer the display and indicators.
Settings
-4 (darkest) to 0 (brightest) (default)
• Display language can only be selected for menus displayed on the TV screen. Information in the front panel
display is displayed in English.
Distance Unit
Setup Menu
• When the STATUS indicator glows red, the display is at maximum brightness regardless of this setting.
) key to display “OSD Language” directly on the TV screen.
• The settings may be changed automatically when using the TV which supports the HDMI control function.
➜
Display
➜
Distance Unit
Use to change the display unit of measurement.
• When the Eco function is activated, this function cannot be configured (p. 43).
Settings
Meters (default setting other than U.S.A. and Canada models), Feet (default setting for U.S.A. and
Canada models)
OSD Language
Setup Menu
➜
Display
➜
OSD Language
• If the unit used with measurement displays is changed from “Meters” to “Feet”, or vice versa, configure
settings again to reflect the change in unit. The change will not be reflected with current settings.
Use to select the language used for menus displayed on the TV screen.
Settings
Menus are displayed in Japanese.
ENGLISH
(default)
Menus are displayed in English.
DEUTSCH
Menus are displayed in German.
FRANÇAIS
Menus are displayed in French.
ESPAÑOL
Menus are displayed in Spanish.
ITALIANO
Menus are displayed in Italian.
NEDERLANDS
Menus are displayed in Dutch.
РУССКИЙ
Menus are displayed in Russian.
SVENSKA
Menus are displayed in Swedish.
TÜRK
Menus are displayed in Turkish.
SETTINGS ➤ Setup menu
En
77
Information
Display information for the audio and video signal input to this unit.
Audio
Setup Menu
System
➜
Information
➜
Audio
The following information on the current audio input signal is displayed.
Format
Digital audio format
Number of channels
The number of channels contained within the input signal—front/
surround/low field effects (LFE). Example: “3/2/0.1” means signal contains
3 front channels, 2 surround channels, and LFE.
If the signal contains channels other than front, surround, and LFE, the
total number of channels may be displayed. Example: “7.1.2ch” (the last
number 2 indicates the height channels)
Sampling frequency
The sampling frequency of the digital input signal
Bit rate
The per-second bit rate of the input signal
Setup Menu
➜
Information
➜
System
Display the version of firmware currently installed on this unit.
• The audio bit rate may not be displayed for some input signals.
Video
Setup Menu
➜
Information
➜
Video
The following information on the current video input signal is displayed.
Type
HDMI or DVI
Resolution
Video signal resolution
SETTINGS ➤ Setup menu
En
78
Network
Configures the network settings.
Information
Setup Menu
Network Connection
➜
Network
➜
Information
Display the network information on the unit.
Setup Menu
➜
Network
➜
Network Connection
Select the network connection method.
Settings
• The options displayed vary according to the type of network connection (Wired/Wireless (Wi-Fi)/Wireless
Direct).
Status
The connection status of the NETWORK jack
Connection
Connection method
MC Network
The connection status of MusicCast Network
SSID
The access point to which the unit is connected
Security
The encryption method for your network
MAC Address
MAC address (Ethernet/Wi-Fi)
IP Address
IP address
Subnet Mask
Subnet mask
Default Gateway
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
DNS Server (S)
The IP address of the secondary DNS server
vTuner ID
The ID of the Internet radio (vTuner)
Wired
Select this option when connecting the unit to a network with a network
cable (not supplied).
Wireless (Wi-Fi)
Select this option when connecting the unit to a network via the wireless
router (access point).
Wireless Direct
Select this option when connecting a mobile device to the unit directly.
SETTINGS ➤ Setup menu
En
79
IP Address
MAC Address Filter
➜
Setup Menu
Network
➜
IP Address
Configure the network parameters (such as IP address).
❑ DHCP
➜
Setup Menu
Network
➜
MAC Address Filter
The MAC address filter limits network devices that can be used to operate the unit.
When operating the unit via an app on a mobile device, specify the MAC address of the
device.
Select whether to use a DHCP server.
Settings
• Operation of the AirPlay function (p. 63) or DLNA-compatible device (p. 60) is not limited by this setting.
Off
The DHCP server is not used. Configure the network parameters
manually. For details, see “Manual network settings”.
❑ Filter
The DHCP server is used to automatically obtain the unit’s network
parameters (such as IP address).
Enable/disable the MAC address filter.
On (default)
Manual network settings
1
2
Set “DHCP” to “Off”.
Settings
Off (default)
Disable the MAC address filter.
On
Enable the MAC address filter. In “MAC Address 1–10”, specify the MAC
addresses of the network devices that will operate the unit.
Use the S/T keys to select a parameter type.
❑ MAC Address 1–10
IP Address
Specify an IP address.
Subnet Mask
Specify a subnet mask.
Specify the MAC addresses (up to 10) of the network devices that will operate the unit
when “Filter” is set to “On”.
Default Gateway
Specify the IP address of the default gateway.
DNS Server (P)
Specify the IP address of the primary DNS server.
DNS Server (S)
Specify the IP address of the secondary DNS server.
3
Use the W/X keys to move the edit position and the S/T keys to
select a value.
4
Press the ENTER key.
1
2
Use the S/T keys to select an MAC address number (1 to 10).
3
Press the ENTER key.
Use the W/X keys to move the edit position and the S/T keys to
select a value.
SETTINGS ➤ Setup menu
En
80
Network Standby
Setup Menu
➜
Network Name
Network
➜
Network Standby
Setup Menu
➜
➜
Network
Network Name
Turn the function that controls the unit’s power (Network Standby) when a network
device or Bluetooth device is operated on or off.
Edit the name displayed for this device (the unit’s name on the network) on other
network devices. A name up to 15 characters in length may be specified.
Settings
1
Off
Disable the network standby function.
Use the W/X keys to move the edit position and the S/T keys to
select a character.
The unit will turn on when the dedicated MusicCast
CONTROLLER or HOME THEATER CONTROLLER (WLAN)
app installed on your mobile device is used to initiate
playback while the unit is off.
On (default)
Enable the network
standby function.
The unit will turn on and off in accordance with the
following Bluetooth device operations.
Coordinated power on
When a Bluetooth device is connected to this unit while it is
off, this unit turns on and the input source switches to
BLUETOOTH.
Coordinated power off
When a Bluetooth device is disconnected from this unit
while it is on, this unit turns off.
(Only when BLUETOOTH is selected as the input source.)
• The unit consumes more power when “Network Standby” is set to “On” than when it is set to “Off”.
Network Name
YSP-5600 1B08FA
[RETURN]:Back
• The following alphanumeric characters and symbols may be used.
( ) [ ] { } < > * ! ? # % & . , : ; _ | / \ $ ~ ^ ' " ` 0–9 @ + - = A–Z a–z
2
Press the RETURN (
) key.
Network Update
Setup Menu
➜
Network
➜
Network Update
Update the firmware via the network.
Perform Update
This option is available after firmware has been updated. For details, see “Updating the
unit’s firmware” (p. 87).
SETTINGS ➤ Setup menu
En
81
Bluetooth
Configures the Bluetooth settings.
Bluetooth
Device Search
➜
Setup Menu
Bluetooth
➜
Bluetooth
Enables/disables the Bluetooth function.
Disable the Bluetooth function.
On (default)
Enable the Bluetooth function.
Setup Menu
➜
Bluetooth
➜
Bluetooth
Device Search
MAC Address
Transmission
Setup Menu
➜
Select the Bluetooth speakers or headphones to which audio will be transmitted, and
connect the unit to the speakers or headphones wirelessly.
Settings
Off
Setup Menu
➜
➜
➜
Bluetooth
MAC Address
Display the MAC address for the Bluetooth connection.
Transmission
Transmit audio from the unit to Bluetooth speakers or headphones.
Settings
Off (default)
Audio can not be transmitted.
On
Audio input to the unit can be transmitted to Bluetooth speakers or
headphones.
SETTINGS ➤ Setup menu
En
82
Settings each input source (Option menu)
Configure the functions related to the input source currently playing back content.
The option menu is displayed on, and operated from, the TV screen. See “Displaying the menu screen on the TV” (p. 27) for instructions on
displaying the option menu on the TV.
Input selector
keys
Setting the option menu
1
Press the input selector key for the input source to
be configured.
2
Press the OPTION (
4
Change setting value by pressing the S/T key.
Option
) key.
Treble
- 5
Bass
Volume Trim
Audio Delay
Audio Assign
Option
///
ENTER
OPTION (
Treble
Bass
Volume Trim
Audio Delay
Audio Assign
)
3
0
5
Select the items by pressing the S/T key, then
press the ENTER key or X key.
Press the OPTION (
) key to exit the option menu.
• The configurable items vary depending on the input source selected.
Option
Treble
Bass
Volume Trim
Audio Delay
Audio Assign
0
SETTINGS
➤ Settings each input source (Option menu)
En
83
Option menu list
Menu
Description
Input
Treble
Adjust the output level of high (treble)
tones.
HDMI1– 4, TV, OPTICAL, AUX1– 2,
Bluetooth, NET (such as an internet
radio station)
Bass
Adjust the output level of low (bass)
tones.
HDMI1– 4, TV, OPTICAL, AUX1– 2,
Bluetooth, NET (such as an internet
radio station)
Volume Trim
Adjust the input level for each jack to
compensate for variations in volume.
HDMI1– 4, TV, OPTICAL, AUX1– 2,
Bluetooth, NET (such as an internet
radio station)
Audio Delay
Adjust deviations in timing between
audio and video playback.
HDMI1– 4, TV, OPTICAL, AUX1– 2
When an HDMI device is selected as
the input source, audio from a different
input source is assigned to HDMI
audio.
HDMI1– 4
Audio Assign
Adjusting tones (Treble, Bass)
Adjust the output level of high (treble) and low (bass) tones.
Adjustable range
-12 to +12 (default: 0)
Audio delay control (Audio Delay)
TV images sometimes lag behind the sound. You can use this function to delay the
sound output to synchronize it with the video image.
Adjustable range
HDMI1– 4: AUTO (default), 0 ms to 500 ms, 5 ms increments
TV, OPTICAL, AUX1– 2: 0 ms (default) to 500 ms, 5 ms increments
When “AUTO” is selected, output timing is automatically adjusted. This setting is only
available when the TV connected via HDMI cable supports the audio delay automatic
adjustment feature.
Assigning HDMI audio to a different input jack
(Audio Assign)
When HDMI1– 4 is the selected input source, sound can be input from the OPTICAL
jack rather than the HDMI IN jack.
Use this function to listen to sound from a different playback device while watching
video of the BD/DVD player.
Settings
HDMI (default), OPTICAL
Adjusting input level of each jack (Volume Trim)
Adjust the input level for each jack to compensate for variations in volume.
Adjustable range
-12 to +12 (default: 0)
SETTINGS
➤ Settings each input source (Option menu)
En
84
Advanced setup
z
The advanced setup enables more precise configuring of this unit’s function. For example, maximum volume can be specified and the INPUT
key on the top panel can be disabled.
Setting the advanced setup
1
2
Press the z key to turn off this unit.
4
While holding down the INPUT key on the top panel,
press the z key on the remote control to turn on the
power.
Use the S/T key to display the desired menu in the
front panel display and then press the X key or
ENTER key.
• To return to the previous menu, press the W or RETURN (
///
ENTER
RETURN (
CONNECT
INPUT
)
5
6
) key.
Use the S/T key to change setting.
Press the z key to turn off this unit.
The new setting is reflected when you turn on the unit by
pressing the z key.
INTELLIBEAM MIC
“ADVANCED” appears in the front panel display.
ADVANCED
• The advanced setup menu is not displayed on the TV screen.
3
Release the INPUT key on the top panel.
SETTINGS ➤ Advanced setup
En
85
Advanced setup list
Menu
Settings/Adjustable range
Description
TURN ON VOLUME
OFF (Not set) (default), 1 to 70
Set the initial volume level when the power of this unit is turned on.
When set to “OFF”, volume level is the same as when this unit is turned off.
MAX VOLUME
1 to 99, MAX (Maximum) (default)
Set the maximum volume level so that this unit will not output sound beyond the limited volume level.
INPUT LOCK
ON (INPUT key operation is disabled)
OFF (INPUT key operation is enabled) (default)
Select whether or not to enable the INPUT key on the unit.
PANEL LOCK
ON (Key operation on the unit is disabled)
OFF (Key operation on the unit is enabled) (default)
Select whether or not to enable key operations on the unit (except the advanced setup operations).
IR INPUT POWER
ON (Enables power-on)
OFF (Disables power-on) (default)
Select whether or not to automatically turn on this unit by pressing an input selector key on the remote
control when the unit is turned off.
AC ON STANDBY
ON (Enters standby mode) (default)
OFF (Restores the state before power was lost)
Set this unit’s power to off when the AC power is recovered after the power to this unit was lost temporally
(disconnect the AC power plug from the wall outlet, power outage, etc.).
MEMORY PROTECT
ON (Protect is performed)
OFF (Protect is not performed) (default)
Protect settings stored in system memory, and Internet radio stations registered with the unit.
YRB FL
YES (The reflection board is used)
NO (The reflection board is not used) (default)
Use the YRB-100 sound reflection board for the front left channel. Refer to page 99 for details of YRB-100.
YRB FR
YES (The reflection board is used)
NO (The reflection board is not used) (default)
Use the YRB-100 sound reflection board for the front right channel. Refer to page 99 for details of YRB-100.
YRB SL
YES (The reflection board is used)
NO (The reflection board is not used) (default)
Use the YRB-100 sound reflection board for the surround left channel. Refer to page 99 for details of
YRB-100.
YRB SR
YES (The reflection board is used)
NO (The reflection board is not used) (default)
Use the YRB-100 sound reflection board for the surround right channel. Refer to page 99 for details of
YRB-100.
AUTO POWER STANDBY
ON (This unit turns off automatically) (default setting for U.K.,
Europe and Russia models)
OFF (This unit does not turn off automatically) (default setting
other than U.K., Europe and Russia models)
When set to “ON”, this unit turns off automatically in any of the following situations:
• Audio is coming from the selected input source, but no operations have been performed for 8 hours or
more.
• HDMI1– 4, Bluetooth or NET is selected as the input source, but no audio has been input to the unit or no
operations have been performed with the unit for more than 20 minutes.
NOTICE OF NEW FW
ON (Notify) (default)
OFF (Do not notify)
Notifications will not be displayed on the TV screen when updates for the unit’s firmware are provided via
the network.
FW UPDATE
01.02 (The firmware version is displayed)
Start OK? (Firmware is updated)
Confirm firmware version/update firmware.
INITIALIZE
INFO (Initialize all settings not related to the network)
NET INFO (Initialize network related settings)*
CANCEL (Do not initialize) (default)
Reset the parameters of this unit to the factory presets. When the unit freezed, the problem may solve by
restoring to their default values.
* The following configurations will be restored if “INFO” is selected.
• Network Standby (p. 81)
• Bluetooth (p. 45)
• Initializing this unit also initializes measurement results with IntelliBeam and settings stored in system memory. Perform “AUTO SETUP” from the “IntelliBeam” menu again (p. 29).
SETTINGS ➤ Advanced setup
En
86
Updating the unit’s firmware
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.
Using “Network Update” in the setup menu
to update firmware
When the unit is turned on for the first time after a new version of the
unit’s firmware has been released, a message indicating that a
firmware update is available will be displayed on the TV screen,
and an envelope icon ( ) will be displayed in the setup menu
(p. 66)
1
2
Use the S/T keys to select “Network”, and then
press the ENTER key.
The unit’s firmware can be updated as follows.
3
Use the S/T keys to select “Network Update”, and
then press the ENTER key.
• Update firmware from “Network Update” in the setup menu.
/
ENTER
SETUP (
• Update firmware by connecting a USB flash drive to which the
unit’s firmware update has been saved (p. 88).
)
• Update firmware using the dedicated MusicCast CONTROLLER
app installed on a mobile device. Follow MusicCast
CONTROLLER guides to operate the app and update the
firmware.
Notes
• Do not operate the unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 20 minutes or more (depending
on your Internet connection speed).
Press the SETUP (
) key twice.
The setup menu is displayed on the TV screen.
The following screen is displayed when firmware updates
are available.
Network Update
Perform Update
• To cancel the operation without updating the firmware, press the SETUP
( ) key.
• If the Internet connection speed is slow, or the unit is connected to the wireless
network, network update may not be possible depending on the condition of
the network connection. In this case, update the firmware using the USB flash
drive (p. 88).
• To perform the following procedure, your TV must be connected to the unit via
HDMI.
• For details on update, visit the Yamaha website.
SETTINGS ➤ Updating the unit’s firmware
En
87
4
Updating firmware with connection of a USB flash drive
Press the ENTER key.
The TV screen goes black and firmware update begins.
Update progress is displayed on the front panel display while firmware is
updated.
FW Update
The update progress is displayed.
Download the latest firmware version from the Yamaha website to a USB flash drive,
which can then be used to update the unit’s firmware.
See information provided when updating firmware for details.
1
2
3
Save this unit’s firmware to a USB flash drive.
4
Select “FW UPDATE” in the advanced setup menu, and press the
ENTER key.
5
Use S/T key to select “Start OK?”, and press the ENTER key.
Success!
5
When “Success!” is shown in the front panel display, press the z
key on the unit’s top panel.
Turn off the unit.
Connect the USB flash drive to the UPDATE ONLY jack on the unit’s
rear panel.
The firmware update begin.
The firmware update is complete.
Update progress is displayed on the front panel display while firmware is
updated.
• If the firmware update fails, use the z key to turn the unit off and then on again, and repeat the procedure
from step 1 again.
FW Update
• If “XXXXSumError” is displayed, a problem with communications over the network has occurred. Check
communications status, use the z key to turn the unit off and then on again, and then repeat the procedure
from step 1 again.
The update progress is displayed.
Success!
6
When “Success!” is shown in the front panel display, press the z
key on the unit’s top panel.
The firmware update is complete.
SETTINGS ➤ Updating the unit’s firmware
En
88
DTS:X updates
• If the firmware update fails, use the z key to turn the unit off and then on again, and repeat the procedure
from step 1 again. If the firmware update fails again, confirm the USB flash drive is correctly connected to
the UPDATE ONLY jack.
The unit supports update to DTS:X Version 2, scheduled to be released shortly. An
update to DTS:X Version 2 will be provided when the unit’s firmware is updated.
• If any of the following messages are displayed, a problem has occurred during the update.
See the information provided with the firmware update for more information on DTS:X
Version 2.
– “Not found”:
The USB flash drive does not contain the firmware data. Use a PC to properly save the firmware data to
the USB flash drive again.
– “XXXXSumError”:
There is a problem with the data stored on the USB flash drive. Use a PC to confirm data on the USB
flash drive.
SETTINGS ➤ Updating the unit’s firmware
En
89
APPENDIX
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit,
disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center.
General
Cause
Remedy
See page
This unit does not operate
properly.
Problem
The internal microcomputer has been frozen by an external electric shock
(such as lightning or excessive static electricity) or by a power supply with
low voltage.
Disconnect the AC power supply cable from the outlet and plug it again in
after 30 seconds.
–
This unit fails to turn on when the
z key is pressed, or the unit is
turned off soon after the power
has been turned on.
The AC power supply cable is not firmly connected to the AC wall outlet.
Connect the AC power supply cable firmly to the AC wall outlet.
The internal microcomputer has been frozen by an external electric shock
(such as lightning or excessive static electricity) or by a power supply with
low voltage.
Disconnect the AC power supply cable from the outlet and plug it again in
after 30 seconds.
“PANEL LOCK” is set to “ON”.
Set to “OFF”.
85
The internal temperature becomes too high and the overheat protection
circuitry has been activated.
Wait for about 1 hour for this unit to cool down, turn it back on after
confirming an adequate amount of ventilation space and not to cover this
unit with a cloth.
12
When the Auto Power Standby function is enabled, this unit turns off
automatically in any of the following situations:
– Audio is coming from the selected input source, but no operations have
been performed for 8 hours or more.
– HDMI1–4, Bluetooth or NET is selected as the input source, but no audio
has been input to the unit or no operations have been performed with the
unit for more than 20 minutes.
Turn on the power of the unit and play back the source again. If the Auto
Power Standby function is not used, set “AUTO POWER STANDBY” to
“OFF”.
The network standby function has been activated, terminating the Bluetooth
connection.
Resume the Bluetooth connection using the Bluetooth device, or turn on
this unit and disable the network standby function.
This unit is suddenly turned off.
26
–
86
81
APPENDIX ➤ Troubleshooting
En
90
Problem
No sound.
No sound or too small sound from
a specific channel.
Surround sound effects are
insubstantial.
Cause
Remedy
See page
Incorrect input or output cable connections.
Connect the cable properly.
No appropriate input source has been selected.
Select an appropriate input source with the input selector keys.
23
36
The volume is turned down.
Turn up the volume.
36
The sound is muted.
Press the MUTE (
the volume level.
) or VOL (+/-) key to resume audio output and adjust
36
There is input signal cannot be played back by this unit.
Play a source whose signals can be reproduced by this unit. Change the
system settings of the source device.
106
“HDMI Audio Out” is set to “TV”.
Set to “AMP”.
76
“HDMI Control” is set to “Off”.
When connecting ARC (Audio Return Channel) supported TV and this unit
using an HDMI cable only, set “HDMI Control” to “On”.
76
To use this unit with “HDMI Control” set to “Off”, connect the TV’s audio
output jack to this unit’s TV (digital optical) jack via the optical cable.
22
Sound from an HDMI control-enabled TV is set for output from the TV’s
built-in speakers.
Use the TV’s HDMI settings to set audio output to any option other than the
TV’s built-in speakers.
The output level of the channel is muted.
Raise the output level of the channel.
42, 74
The beam setting is inappropriate.
Adjust the beam setting.
29, 69
The source is played in stereo playback mode.
Switch to 3D surround/surround playback mode.
37, 38
When connecting this unit with playback device and TV digitally, the output
setting of the playback device and TV is not valid.
Refer to documentation supplied with your device and check the setting.
The playback device is set for constant output from 2 channels (PCM, etc.). Change the playback device’s audio output setting.
The listening room is not a regular shape, or the unit or listening position is
not at the center of the right and left wall of the listening room.
Sounds from above cannot be
clearly heard.
–
Relocate the unit or listening position.
–
–
13
There is no wall in the path of the sound beam.
Place the sound reflection board in the path of the sound beam.
When “My Surround” is set to “On”, listening position is not in front of the
unit.
Listen in front of this unit.
The angle of sound beams coming from the height channels is not properly
set.
Apply 3D surround sound playback mode, and then set “Height L” and
“Height R” for “Vertical Angle” in the setup menu to positions where audio
can be more clearly heard.
A playback mode other than 3D surround sound playback mode is being
used for playback.
Use 3D surround sound playback mode for playback.
The ceiling is too high, or there are items protruding from the ceiling.
Change the unit’s installation position or the listening position, and then
perform AUTO SETUP again.
99
73
37, 69
37
29
APPENDIX ➤ Troubleshooting
En
91
Problem
No sound
coming out of
the subwoofer.
Wired/Wireless
Remedy
See page
The AC power supply cable of the subwoofer is not firmly connected to the
AC wall outlet.
Connect the AC power supply cable firmly to the AC wall outlet.
–
Wired/Wireless
The volume of the subwoofer is low.
Increase the volume via the control on the subwoofer.
–
Wired/Wireless
The subwoofer is turned off.
Turn on the subwoofer.
–
Wired/Wireless
The subwoofer's Auto Standby function (the function that automatically
turns it off) was activated.
Deactivate the subwoofer's Auto Standby function or adjust its operating
sensitivity.
–
Wired
The “Bass Out” item under “Subwoofer” is set to “Front/Wireless”.
Set it to “Wired”.
73
Wireless
Conditions for wireless communications are not good, and the unit and the
wireless subwoofer kit are not connected.
(The indicator on the wireless subwoofer kit flashes green, or glows red.)
Move the wireless subwoofer kit closer to the unit.
If the problem persists, move the wireless subwoofer kit to a location where
its indicator steadily glows green.
–
If there are obstacles such as metal furniture obstructing communications
between the unit and the wireless subwoofer kit, rearrange the furniture or
reposition the wireless subwoofer kit.
–
If there are devices such as microwave ovens or wireless network devices
that emit electromagnetic waves, move the unit and the wireless subwoofer
kit away from these devices.
–
Unplug the power cable of the wireless subwoofer kit from the AC wall
outlet, and then plug it in again.
–
Wireless
The volume of
the subwoofer
is low.
Cause
The unit is not paired with the wireless subwoofer kit.
(The indicator on the wireless subwoofer kit flashes red.)
Move the wireless subwoofer kit closer to the unit to improve conditions for
wireless communications, and follow the instructions below to pair the two.
After “Pairing” is selected for “Subwoofer” in the setup menu, press and
hold the SUBWOOFER PAIRING button on the wireless subwoofer kit for
three seconds to pair it with the unit. If the indicator on the wireless
subwoofer kit does not glow green steadily after pairing, the unit may be
malfunctioning. Disconnect the power cable and contact your nearest
Yamaha dealer or service center to request repairs.
73
73
Wireless
The subwoofer output is set to “Wired”.
Set to “Front/Wireless”.
Wired/Wireless
The volume of the subwoofer is low.
Increase the volume via the control on the subwoofer.
Increase the volume of the subwoofer with the SUB + key.
–
36
Wired/Wireless
Content from an input source with a limited support for low tones is playing.
Play content from an input source with broader support for low tones to see
if volume is still low.
–
Wired/Wireless
The unit is in target playback mode.
Switch to 3D surround/surround playback mode or stereo playback mode.
37, 38, 40
APPENDIX ➤ Troubleshooting
En
92
Problem
Sound from
the subwoofer
is intermittent.
Cause
Remedy
See page
Wired/Wireless
Cables used to connect the subwoofer to the unit (or the wireless subwoofer
kit) are not connected firmly.
Connect the cables firmly.
Wireless
Wireless communication conditions are not good, and the unit and the
wireless subwoofer kit are not connected.
(The indicator on the wireless subwoofer kit flashes green, or glows or
flashes red.)
Move the wireless subwoofer kit closer to the unit.
If the problem persists, move the wireless subwoofer kit to a location where
its indicator steadily glows green.
–
If there are obstacles such as metal furniture obstructing communication
between the unit and the wireless subwoofer kit, rearrange the furniture and
the wireless subwoofer kit.
–
If there are devices such as microwave ovens or wireless network devices
that emit electromagnetic waves, move the unit and the wireless subwoofer
kit away from these devices.
–
25
The image is not displayed on TV
screen.
The HDMI cable is not securely connected.
Connect the HDMI cable properly.
Menu screen of this unit is not
displayed.
The input switch of TV is not set correctly.
Set the TV’s input source to this unit.
A digital or high-frequency
equipment produces noises.
The unit may be placed close to digital equipment or high-frequency
equipment.
Move the equipment away from the unit.
The HDMI control function does
not work properly.
“HDMI Control” is set to “Off”.
Set “HDMI Control” to “On”.
The HDMI control function is disabled on your TV.
Refer to documentation supplied with your TV and check the setting.
–
The number of the connected HDMI devices exceeds the limit.
Disconnect some of the HDMI devices.
–
Amplifiers (AV amplifiers, sound bars, etc.) other than the unit are
connected to the TV or a playback device with an HDMI cable.
Connect only this unit to the TV or a playback device for use as an amplifier.
Sound beams for the front
channels cannot be adjusted
manually.
“Front” of “Channel Out” is set to “Stereo”.
Set to “Beam”.
Audio delay control function is
not effective even “Audio Delay”
is set to “AUTO”.
The TV does not support the audio delay auto adjustment feature.
“Disable” appears in the front
panel display after key operation.
The key is unable to function in the current status of the unit.
22, 23
27
–
76
–
72
Adjust timing of sound output manually from “Audio Delay” in the option
menu.
84
–
APPENDIX ➤ Troubleshooting
En
93
Bluetooth
Problem
Receiving
Unable to
connect the unit
to a Bluetooth
device.
No sound is
heard or the
sound is
intermittent via
the unit.
Cause
Remedy
See page
“Bluetooth” is set to “Off”.
Set it to “On”.
82
“Transmission” is set to “On”.
Set it to “Off”.
82
Bluetooth is not selected as the input source.
Select Bluetooth as the input source.
46
Another Bluetooth device is connected.
Terminate the current Bluetooth connection, and connect to the device from
which audio should be received.
A Bluetooth adaptor, etc. that you want to connect to the unit has a
password other than “0000”.
Use a Bluetooth adaptor, etc. whose password is “0000”.
45, 46
45
The device does not support A2DP.
Connect to a Bluetooth audio device that supports A2DP.
As more than 20 devices have been connected, information for the oldest
connection has been deleted.
Connect to the device again. The unit is can connect to up to 20 Bluetooth
devices for receiving and transmitting audio. If a new device is successfully
connected to the unit after 20 other devices have already been connected,
the device with the earliest connection date will have been deleted to make
room for the new device.
105
45, 46
The unit and device are too far apart.
Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit
and connect the device to this unit.
45, 46
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signals.
–
The device is not set to send Bluetooth audio signals to the unit.
Check that the Bluetooth function of the device is set properly.
–
Playback on the device has not been performed.
Perform playback on the device.
–
The device’s volume is set to minimum.
Turn up the volume level on the device.
The unit and device are too far apart.
Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit.
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signal.
The Bluetooth connection of the unit with the device is disconnected.
Perform Bluetooth connection operations again.
–
45, 46
–
46
APPENDIX ➤ Troubleshooting
En
94
Problem
Transmitting
Cannot make the
unit connected
to the Bluetooth
device.
No sound is
heard or the
sound is
intermittent via
the Bluetooth
device.
Cause
Remedy
See page
“Bluetooth” is set to “Off”.
Set it to “On”.
82
“Transmission” is set to “Off”.
Set it to “On”.
82
Another Bluetooth device is connected.
Terminate the current Bluetooth connection, and connect to the device to
which audio should be transmitted.
The device does not support A2DP.
Connect to a Bluetooth audio device that supports A2DP.
More than 20 devices are connected and the earliest connecting
information is deleted.
Connect to the device again. The unit is able to connect up to 20 Bluetooth
devices for receiving and transmitting audio. If a new device is successfully
connected to the unit after 20 other devices have already been connected,
the device with the earliest connecting date will have been deleted to make
room for the new device.
45, 48
The unit and device are too far apart.
Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit
and connect the device to this unit.
45, 48
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signals.
The device is not set to send Bluetooth audio signals to the unit.
Check that the Bluetooth function of the device is set properly.
The device’s volume is set to minimum.
Turn up the volume level on the device.
Transmitted audio does not play.
Play audio from the device selected with the input selector key.
45, 48
105
–
–
–
The unit and device are too far apart.
Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit.
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signals.
The Bluetooth connection of the unit with the device is disconnected.
Perform Bluetooth connection operations again.
Attempted to establish a connection during playback with AirPlay.
Playback with AirPlay cannot be transmitted. Terminate AirPlay playback
and try again to establish a connection.
48
45, 48
–
48
48, 63
Remote control
Problem
The remote control does not work
and/or function properly.
Remedy
See page
The wrong distance or angle.
Cause
The remote control functions within a maximum range of 6 m (20 ft) and no
more than 30 degrees off-axis from the front panel.
7
Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this unit.
Reposition this unit.
The batteries are weak.
Replace all batteries.
–
7
APPENDIX ➤ Troubleshooting
En
95
Network
Problem
Cause
Remedy
See page
The network feature does not
function.
The network parameters (IP address) have not been obtained properly.
“Not connected” is displayed with
“Wireless (Wi-Fi)” configuration;
unable to connect to wireless
router (access point).
The wireless router’s MAC address filter is enabled.
“Not connected” is displayed with
“Wireless (Wi-Fi)” configuration
using the WPS function (“WPS
Button” and “PIN Code”) and
“Access Point Scan”; unable to
connect to wireless router
(access point).
The wireless router (access point) does not broadcast its SSID.
“Not connected” is displayed with
“Wireless (Wi-Fi)” configuration
using the WPS function (“WPS
Button” and “PIN Code”); unable
to connect to wireless router
(access point).
The wireless router (access point) uses WEP encryption.
Playback stops unexpectedly and
files cannot be played
continuously.
The folder contains some files that cannot be played via the unit.
The unit does not detect the PC.
The media sharing setting is not correct.
Configure the sharing setting and select the unit as a device to which music
contents are shared.
Some security software installed on your PC is blocking the access of the
unit to your PC.
Check the settings of security software installed on your PC.
The unit and PC are not in the same network.
Check the network connections of the unit and PC, and then connect the
unit and the PC to the same network.
–
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the setup menu, disable the MAC address filter
or specify the MAC address of your PC to allow it to access to the unit.
80
The files are not supported by the unit or the media server.
Use the file format supported by both the unit and the media server.
The files in the PC cannot be
viewed or played back.
Enable the DHCP server function on your router and set “DHCP” in the
setup menu to “On” on the unit. If you want to configure the network
parameters manually, check that you are using an IP address which is not
used by other network devices in your network.
A connection cannot be established if the wireless router’s MAC address
filter is enabled. Check wireless router (access point) settings and try a
different connection method.
80
50, 80
A connection cannot be established if the wireless router (access point) is
configured so that it does not broadcast its SSID. Check wireless router
(access point) settings and try a different connection method.
53, 57
A connection cannot be established using the WPS function. Try a different
connection method.
53, 57
Delete or move files (including video or hidden files) that cannot be played
via the unit from the folder.
–
60
–
60
APPENDIX ➤ Troubleshooting
En
96
Problem
Cause
Remedy
See page
The selected Internet radio station is currently not available.
There may be a network problem at the radio station, or the service may
have been stopped. Try the station later or select another station.
–
The selected Internet radio station is currently broadcasting silence.
Some Internet radio stations broadcast silence at certain of times of the day.
Try the station later or select another station.
–
Access to the network is restricted by the firewall settings of your network
devices (such as the router).
Check the firewall settings of your network devices. The Internet radio can
be played only when it passes through the port designated by each radio
station. The port number varies depending on the radio station.
–
In “MAC Address Filter” in the setup menu, disable the MAC address filter
or specify the MAC address of your mobile device to allow it to access to
the unit.
80
The unit and mobile device are not in the same network.
Check the network connections and your router settings, and then connect
the unit and mobile device to the same network.
–
Firmware update via the
network (Network Update)
fails.
It may not be possible depending on the condition of the network.
Update the firmware via the network (Network Update) again or use a USB
flash drive.
The iPod does not recognize
the unit when using AirPlay.
The unit and iPod/mobile device are connected to different SSIDs on the
same access point.
The Internet radio cannot be
played.
The MAC address filter is enabled on the unit.
The dedicated apps for
mobile device does not detect
the unit.
Check the network connections for the unit and your mobile device, and
connect them to the same SSID.
–
The app installed on a mobile
device does not recognize the
unit.
The unit cannot connect to
the Internet via a wireless
router (access point).
Wireless network is not
found.
87
The wireless router (access point) is turned off.
Turn on the wireless router (access point).
–
The unit and the wireless router (access point) are too far apart.
Place the unit and the wireless router (access point) closer to each other.
–
There is an obstacle between the unit and the wireless router (access
point).
Move the unit and the wireless router (access point) in a location where
there are no obstacles between them.
–
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
Move this unit away from the device that is emitting radio frequency signals.
Access to the network is restricted by the firewall settings of the wireless
router (access point).
Check the firewall setting of the wireless router (access point).
–
–
APPENDIX ➤ Troubleshooting
En
97
Messages in the front panel display
Message
Description
See page
ViewScreen
This unit’s setup menu is displayed on the TV screen. Use the TV screen to configure settings.
66
Key Locked
The keys on the unit are locked. Use the remote control.
85
Sleep XXmin
The Auto Power Standby function will turn this unit off in XX minutes.
85
Protected
SYSTEM MEMORY 1–3 and NET RADIO 1–3 are protected.
85
Disable
Key operation is disabled.
–
APPENDIX
➤ Messages in the front panel display
En
98
When surround effect is not enough
The unit achieves its surround sound effects by projecting sound beams which reflect
off walls. The sound beams are not reflected toward to the listening position caused by
furniture, etc., in the path of sound beams, or the room shape. In this case, the sound
may become unbalanced.
Installing and adjusting the sound reflection board
YRB-100
1
Decide the position of the sound reflection board.
Install the sound reflection board as shown in the picture.
• Always hold the pole when moving the sound reflection board.
• Use “Channel Level” in the setup menu (p. 74) to determine the precise direction from which sounds
are difficult to hear.
Figure 1. Ideal condition
Figure 2. Surround right beam is not
being reflected because there
is no wall.
Surround right is quieter than surround
(left), or surround right is in front of its
proper location.
Recommended position for installation
Front side
Approx. 1.5 to 3 m (5 to 10 ft)
YRB-100
If the sound beams are not reflected toward to the listening position (figure 2), you can
Front side
Install the panel front side of the
listening position, and outside of
the surround side panel.
adjust for this by installing the optional sound reflection board YRB-100.
Figure 3. With a sound reflection board
installed
The sound beam for surround right is
reflected correctly, and correct surround
sound effect is achieved.
Listening position
Surround side
Install the panel back side of the listening
position, and inside of the front side panel.
Surround side
Approx. 1 to 2.5 m (3 to 8 ft)
• YRB-100 may not be available in some countries or regions.
APPENDIX ➤ When surround effect is not enough
En
99
2
Use advanced setup (p. 85) to configure the sound reflection board.
Set “YRB FL” (FL), “YRB FR” (FR), “YRB SL” (SL), and “YRB SR” (SR) to
“YES” depending upon the position of the sound reflection board to be
installed.
Color bars are displayed across the entire TV screen. This makes it easier to
recognize whether the TV screen is reflected in the panel when determining
the proper angle of the panel in step 4, to the left or right.
3
See the YRB-100 Owner’s Manual for more information.
Adjust the angle of the panel left or right.
Adjust the angle of the panel so that sound beams are reflected toward the
listening position.
Turn on the TV and dim the lights in the room. If you see the TV screen (color
bar display) reflected in the panel from your listening position, the angle of the
panel is properly adjusted.
See the YRB-100 Owner’s Manual for more information.
5
Plug the IntelliBeam microphone into this unit and then perform
“AUTO SETUP” (Beam+Sound optimize) from the “IntelliBeam”
menu (p. 30).
Be sure that the channels (FL, FR, SL, and SR) configured for the sound
reflection board are displayed for “YRB” on the SHOW RESULT screen.
An asterisk (*) is displayed with a channel exhibiting poor sound beam
reflection.
Adjust the height.
Adjust the height of the sound reflection board panel based on the position of
the unit and the sound reflection board, as well as the listening position.
4
6
Press the z key to turn this unit off. Press it a second time to turn
this unit on again.
SHOW
RESULT
MEASUREMENT
E
F
S
S
Y
[E
[RE
N
R
U
U
R
N
T
V
O
R
B
B
T
U
I
N
R
W
:
E
R
R
T
O
O
F
R
N
ONMEN
:
ND :
FER:
U
O
L
]
]
T CH
Ster
Beam
Wire
SL
:Save se
:Do not
COMPLETE.
ECK:Success
eo
d
*
t-up.
save set-up.
Indicates poor reflection
Should this occur, follow the instructions below to re-adjust the panel.
a Adjust the height and angle of the sound reflection board panel in accordance with
installation conditions.
b Use “Channel Level” in the setup menu (p. 74) to confirm that the test sound is
successfully reflected.
For greater precision, perform “AUTO SETUP” in the “IntelliBeam” menu, and then
confirm that the asterisk (*) is no longer displayed with the channel.
If the asterisk (*) continues to be displayed, or if there is still no test sound
reflected from the direction of the sound reflection board, follow directions in
the YRB-100 Owner’s Manual to adjust sound beams manually.
APPENDIX ➤ When surround effect is not enough
En
100
Basic Knowledge of Surround Sound
What is a Digital Sound Projector?
A typical surround sound playback system uses 5 to 7 speakers. To
configure a surround sound playback system that enables audio
playback in the vertical direction, 2 or more additional speakers
should also be installed above the listening position.
The sound image of the system
Digital amplifier
Height speakers
Front speaker
A digital sound projector provides optimal control over the delay time
for each of the compact speakers installed in orderly rows, and
drives the amplifier for each of these speakers, synthesizing audio
signals output from each speaker as highly focused sounds (sound
beams).
Front speaker
Speaker
Subwoofer
Center speaker
Surround
speaker
Sound beams are emitted
in the target direction
Surround
speaker
Surround back speakers
A highly realistic sound field can be created with multiple speakers
installed around the listening position as shown in the illustration
above. However, this can be difficult to do in a living room. The unit
utilizes “digital sound projector” technology, enabling it alone to
provide a realistic and engaging surround sound experience.
These focused sounds possess wave-like characteristics. When they
hit a hard wall or ceiling, they are reflected off the wall or ceiling. A
digital sound projector outputs sound beams from seven channels,
including front (left/right), center, surround (left/right), and height (left/
right) channels, by reflecting these beams off the walls and ceiling so
that sounds reach the listener from the appropriate direction. It
features a technology that enables true surround sound without
requiring the installation of speakers behind or to the sides of the
listener, or in the ceiling.
By combining sound beams coming from the front (left/right) and
back (left/right), it can also create two new audio channels for
surround sound playback using 7.1 channels in the horizontal
direction. With this configuration, the new audio channels output
sounds from surround sound channels, while sound beams coming
from behind the listening position (left/right) output sounds from
surround back channels.
APPENDIX ➤ Basic Knowledge of Surround Sound
En
101
What is Object Based Audio?
Yamaha’s Audio Technologies
With traditional audio technologies, which channels (speakers)
should output what types of sounds when creating audio sources
was pre-defined. This is called “channel-based audio”. In contrast,
new audio systems such as Dolby Atmos use a new technology
called object-based audio. This technology processes each sound
(e.g., the sound of a car or an actor’s voice) contained in an audio
source as an “object” and memorizes each object's sound changes
and positional changes in a sound field to control these changes
during playback. The greatest advantage of applying object-based
audio to a home surround sound system is the power to control the
audio output method based on device features and the number of
speakers used for playback. The unit adjusts sound beam output
according to the listening room setup. It calculates the movements of
an object according to each playback environment and reproduces
sound fields that best match the intentions of a sound director. It also
enables audio output in the vertical direction so that each sound
(object) in an audio source can freely move within a sound field.
This unit features many more functions based on Yamaha’s superior
audio technologies.
Compressed Music Enhancer
This technology enhances and extends bass and treble, which tend
to be weak in digitally compressed formats such as MP3 used with
portable digital audio players and computers. This makes
compressed audio sound more musically dynamic.
CINEMA DSP/CINEMA DSP 3D
This technology enables precise digital recreation of actual acoustic
environments found in well-known concert halls and movie theaters.
This is achieved using Yamaha’s exclusive sound field programs,
which are based on data measured in various sound fields, and with
which the amplitude, depth, and volume of sounds have been
adjusted.
CINEMA DSP 3D uses three-dimensional sound field data, including
vertical directional information, and further extends standard
CINEMA DSP, to make sound field effects more realistic and
three-dimensional.
APPENDIX ➤ Basic Knowledge of Surround Sound
En
102
Glossary
Sampling Frequency and Bit Depth
Dolby Digital Plus
These are values that represent the amount of information used to convert analog signals to digital signals.
They may be expressed as 48kHz/24bit, for example.
This is a compressed audio format for 7.1 channels developed by Dolby Laboratories. It is fully compatible
with Dolby Digital and is available for playback on Dolby Digital-enabled audio systems. It is widely used
with Blu-ray Discs.
• Sampling Frequency
This defines the number of samples per second (sampling a finite set of discrete values in an analog
signal). The higher the sampling rate, the broader the range of frequencies that can be played back.
• Bit Depth
This defines the amplitude value of sounds when quantifying analog signals as finite values. The higher
the bit depth, the deeper sounds are reproduced.
Deep Color
This is a video technology supported by the HDMI standard. It processes RGB or YCbCr signals at bit
depths of 10, 12, or 16 bits per color, whereas conventional formats utilize only 8-bit processing, enabling
reproduction of more colors. Its gamut is comprised of a billion or more colors, while the gamuts of
conventional formats are comprised of only millions of colors or less. This broader gamut results in more
precise reproduction of colors and greater detail in darker portions.
Dolby Atmos
Dolby Surround
This surround sound technology was developed by Dolby Laboratories to extend 2- to 7.1-channel content
in accordance with audio systems used for playback. It not only enables playback of Dolby Atmos content
but also extends traditional audio content to surround sound, including height channel audio, for 3D
surround sound playback.
Dolby TrueHD
This advanced lossless audio technology was developed by Dolby Laboratories for high-definition
disc-based media to deliver sounds that are identical, bit for bit, to studio masters for a great home theater
experience. It delivers up to 8 discrete channels of 24-bit/96-kHz (up to 6 discrete channels of 24-bit/192
kHz) audio simultaneously, and is widely used with Blu-ray Discs.
DTS Digital Surround
This is a compressed audio format for 5.1 channels developed by DTS. It is widely used with DVD discs.
Dolby Atmos is an object-based surround sound technology developed by Dolby Laboratories. Traditional
surround sound technologies record and control audio for each channel. Dolby Atmos records audio
content as a collection of many objects (a combination of audio information and information related to
movement of sound positions) and precisely controls content in accordance with various home theater
environments for an acoustic environment more realistic and three-dimensional than ever before. Another
advantage is the ability to record sounds coming from overhead. It was originally developed for movie
theaters, but can also be applied to home devices.
Dolby Atmos content is provided in the Dolby True HD format, including Dolby Atmos streams, or in the
Dolby Digital Plus format.
DTS Express
Dolby Digital
This advanced lossless audio technology was developed by DTS for high-definition disc-based media to
deliver sounds identical, bit for bit, to studio masters for a great home theater experience. It delivers up to 8
discrete channels at 24-bit/96 kHz (up to 6 discrete channels at 24-bit/192 kHz) audio simultaneously, and is
widely used with Blu-ray Discs.
This is a compressed audio format for 5.1 channels. It was developed by Dolby Laboratories, and is widely
used with DVD discs.
Dolby Digital EX
This technology enables 6.1-channel playback for sources encoded in the Dolby Digital EX format. It takes
the Dolby Digital 5.1-channel setup one step further with an additional back surround channel.
This is a compressed audio format for 5.1 channels. It provides a higher compression ratio than the DTS
Digital Surround audio format, and was developed specifically for network streaming and Blu-ray Disc
secondary audio.
DTS-HD High Resolution Audio
This is a compressed audio format for 24-bit/96-kHz superior sound quality with 7.1 channels developed by
DTS. It is fully compatible with DTS Digital Surround, and is widely used with Blu-ray Discs.
DTS-HD Master Audio
DTS Neo:6
This technology enables discrete 6-channel playback from 2-channel sources. There are two modes
available: “Music mode” for music sources and “Cinema mode” for movie sources. It provides a channel
split effect similar to sources recorded as discrete surround sound.
APPENDIX ➤ Glossary
En
103
DTS:X
DTS:X is the next generation object-based, multi-dimensional audio technology from DTS.
Unbound from channels, DTS:X conveys the fluid movement of sound to create an incredibly rich, realistic
and immersive soundscape - in front of, behind, beside and above the audience - more accurately than
ever before. DTS:X offers the ability to automatically adapt the audio to the speaker layout that best fits the
space, from a television’s built-in speakers to a home surround theater system to a dozen or more speakers
in a commercial cinema.
Immerse yourself at www.dts.com/dtsx
HDMI
High-Definition Multimedia Interface (HDMI) is a digital audio/video interface that has become an industry
standard around the world. It is capable of transmitting both digital video and audio signals intact via a
single cable. It is also compliant with the High-bandwidth Digital Content Protection (HDCP) standard. See
http://www.hdmi.org for more information.
Network information
SSID
SSID (Service Set Identifier) is a name that identifies a particular wireless LAN access point.
Wi-Fi
Wi-Fi is a technology that allows an electronic device to exchange data or connect to the Internet wirelessly
using radio waves. Wi-Fi offers the advantage of eliminating the complexity of making connections with
network cables by using wireless connection. Only products that complete Wi-Fi Alliance interoperability
tests can carry the “Wi-Fi Certified” trademark.
WPS
WPS (Wi-Fi Protected Setup) is a standard established by the Wi-Fi Alliance, which allows easy
establishment of a wireless home network.
Neural:X
Neural:X is the latest downmixing / upmixing and spatial remapping technology from DTS.
It is built in to DTS:X to provide upmix of Neural:X-encoded and non-encoded (PCM) data.
In DTS:X for AVRs and Sound Bars, Neural:X can produce up to 11.x channels.
Pulse Code Modulation (PCM)
This technology records analog audio signals in digital form, converts analog audio signals to digital audio
signals, and transmits analog audio signals in digital form. It is the underlying technology for all digital audio
signal systems, and is widely used with CDs, Blu-ray Discs, and many other types of media as a
uncompressed audio format known as Linear PCM.
x.v.Color
This is a color space supported by HDMI. It has become an international standard for video and offers a
broader gamut than does the sRGB standard for expression of colors never before possible. It expands the
color space while ensuring compatibility with the sRGB standard for more natural and vivid images.
APPENDIX ➤ Glossary
En
104
Specifications
YSP-5600
Other jacks
Amplifier section
• INTELLIBEAM MIC ..................................................................1
• Rated Output Power
• SYSTEM CONNECTOR ...........................................................1
Array speaker (1 kHz, 1% THD, 4 Ω) ............................ 74.8 W
Woofer (100 Hz, 1% THD 4 Ω) .............................17 W + 17 W
• Maximum Effective Output Power
Array speaker (1 kHz, 10% THD, 4 Ω) ............................. 88 W
Woofer (100 Hz, 10% THD 4 Ω) ...........................20 W + 20 W
Speaker section
• Supported codecs
Receiving: SBC, MPEG-4 AAC
Transmitting: SBC
• Wireless output ............................................. Bluetooth Class 2
• NETWORK...............................................................................1
• Maximum communication distance
• UPDATE ONLY.........................................................................1
• IR IN ........................................................................................1
• IR OUT.....................................................................................1
• RS-232C ..................................................................................1
............................................ 10 m ([33 ft] without obstructions)
• Supported content protection method.......SCMS-T (receiving)
General
• Power Supply
Network
[U.S.A. and Canada models].......................... AC 120 V, 60 Hz
Type: Acoustic suspension type
• Ethernet standard: 100BASE-T/10BASE-T
[Taiwan model]................................... AC 110–120 V, 50/60 Hz
Driver: 2.8 cm (1-1/8 in) cone magnetic shielding type 6 x 2
• Compatible with DLNA ver. 1.5
• Array speaker for Vertical Sound Beam
(L/R)
Impedance: 4 Ω
• Array speaker for Horizontal Sound Beam
Type: Acoustic suspension type
Driver: 4.0 cm (1-1/2 in) cone magnetic shielding type x 32
Impedance: 4 Ω
• Supported codecs
WAV (PCM format only) /AIFF/FLAC: up to 192 kHz
ALAC: up to 96 kHz
MP3/WMA/MPEG-4 AAC: up to 48 kHz
• AirPlay supported
[China model] ................................................. AC 220 V, 50 Hz
[Other models] ................................... AC 220–240 V, 50/60 Hz
• Power Consumption
[U.S.A. and Canada models]............................................ 68 W
[Other models] .................................................................. 50 W
• Standby Power Consumption
HDMI Control Off, Network Standby Off .......................... 0.3 W
• Internet Radio
HDMI Control On, Network Standby Off .......................... 1.6 W
Type: Acoustic suspension type
Wireless LAN (Wi-Fi)
HDMI Control Off, Network Standby On
Driver: 11 cm (4-1/2 in) cone non-magnetic shielding type x 2
• Wireless LAN Standards ................................IEEE802.11b/g/n
• Woofer
Impedance: 4 Ω
Input jacks
• Audio Input
Optical ............................................................ 2 (TV, OPTICAL)
• Radio Frequency Band ................................................2.4 GHz
• WPS (Wi-Fi Protected Setup)
(Wired/Wi-Fi/Wireless Direct/Bluetooth) ......... 1.5/1.6/1.7/1.6 W
HDMI Control On, Network Standby On ......................... 3.1 W
• Dimensions (W × H × D)
Without Stands
...........................................Push-Button-Method, PIN Method
........................ 1100 x 212 x 93 mm (43-1/4 x 8-3/8 x 3-5/8 in)
• Security Type.................. WEP, WPA2-PSK (AES), Mixed Mode
With Stands ... 1100 x 216 x 122 mm (43-1/4 x 8-1/2 x 4-3/4 in)
Coaxial........................................................................ 1 (AUX2)
Wireless LAN (Wireless Direct)
• Weight ........................................................... 11.7 kg (25.8 lbs)
• HDMI Input .................................................. 4 (HDMI IN 1 to 4)
• Direct connection with mobile devices
Specifications are subject to change without notice.
Output jacks
Bluetooth
Analog .................................................................1 pair (AUX1)
• HDMI output (ARC).................................................................1
• Bluetooth version Ver. 2.1 +EDR
• Subwoofer output....................................................................1
• Supported protocols
Receiving: A2DP, AVRCP
Transmitting: A2DP
APPENDIX ➤ Specifications
En
105
HDMI signal
• Video signals
• Audio signals
This unit is compatible with the following video signals.
• Deep Color
Audio signal types
Audio signal formats
Compatible media
2ch Linear PCM
2ch, 32–192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio, etc.
Multi-ch Linear PCM
8ch, 32–192 kHz, 16/20/24 bit
DVD-Audio, Blu-ray disc, HD DVD,
etc.
Bitstream (SD Audio)
Dolby Digital, DTS
DVD-Video, etc.
Bitstream (HD Audio)
Dolby Atmos, Dolby TrueHD,
Dolby Digital Plus, DTS:X*,
DTS-HD Master Audio, DTS-HD
High Resolution Audio, DTS
Express
Blu-ray disc, HD DVD
* DTS:X may be provided with a firmware update.
• x.v.Color
• 3D video signal
This unit is compatible with the following resolutions.
• VGA
• 720p/60 Hz, 50 Hz
• 480i/60 Hz
• 1080i/60 Hz, 50 Hz
• 480p/60 Hz
• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
• 576i/50 Hz
• 4K/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
• 576p/50 Hz
• Refer to documentation supplied with the playback device, and set the device appropriately.
• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output
depending on the type of the DVD player.
• The resolution of transmitted video signal varies according to specifications of the TV connected to this
unit.
• This unit is not compatible with HDCP-incompatible HDMI or DVI devices. Refer to documentation supplied
with the HDMI or DVI device for HDCP compatibility.
• To decode audio bitstream signals on this unit, set the input source device appropriately so that the device
outputs the bitstream audio signals directly (does not decode the bitstream signals on the device). Refer to
documentation supplied with the device for details.
Digital audio signal
• Optical/coaxial
Audio signal types
Audio signal formats
Compatible media
2ch Linear PCM
2ch, 32–96 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio,
etc.
Bitstream
Dolby Digital, Dolby Digital
Surround EX, DTS, DTS-ES
DVD-Video, etc.
• HDMI (ARC)
Audio signal types
Audio signal formats
Compatible media
2ch Linear PCM
2ch, 32–192 kHz, 16/20/24 bit
TV
Bitstream
Dolby Digital Plus, Dolby Digital,
DTS
TV
APPENDIX ➤ Specifications
En
106
Windows™
The “
Corporation.
” logo and “IntelliBeam” are trademarks of Yamaha
®
The Bluetooth word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha
Corporation is under license.
Bluetooth
The “
” logo and “Cinema DSP” are registered
trademarks of Yamaha Corporation.
Bluetooth is a technology for wireless communication employing the
2.4 GHz frequency band, which can be used without a license.
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
Internet Explorer, Windows Media Audio and Windows Media Player
are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Android™
Android and Google Play are trademarks of Google Inc.
Handling Bluetooth communications
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Atmos, Dolby Surround, Surround EX and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under
license from DTS, Inc. DTS, the Symbol, DTS in combination with the
Symbol, DTS:X, and the DTS:X logo are registered trademarks or
trademarks of DTS, Inc. in the United States and/or other countries.
© DTS, Inc. All Rights Reserved.
• The 2.4 GHz band used by Bluetooth compatible devices is a radio
band shared by many types of equipment. While Bluetooth
compatible devices use a technology minimizing the influence of
other components using the same radio band, such influence may
reduce the speed or distance of communications and in some
cases interrupt communications.
• The speed of signal transfer and the distance at which
communications is possible differs according to the distance
between the communicating devices, the presence of obstacles,
radio wave conditions and type of equipment.
• Yamaha does not guarantee all wireless connections between this
unit and devices compatible with Bluetooth function.
The Wi-Fi CERTIFIED Logo is a certification mark of Wi-Fi Alliance.
The Wi-Fi Protected Setup Identifier Mark is a certification mark of
Wi-Fi Alliance.
Wi-Fi, Wi-Fi Alliance, Wi-Fi CERTIFIED, Wi-Fi Protected Setup, WPA
and WPA2 are trademark or registered trademark of Wi-Fi Alliance.
“Blu-ray Disc™”, “Blu-ray™”, and the logos are trademarks of the
Blue-ray Disc Association
Apple
iTunes, Mac, AirPlay, iPad, iPhone, iPod, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.
“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface”
are trademarks, or registered trademarks of HDMI Licensing LLC.
MusicCast is a trademark or registered trademark of Yamaha
Corporation.
Explanations regarding GPL
This product utilizes GPL/LGPL open-source software in some
sections. You have the right to obtain, duplicate, modify, and
redistribute this open-source code only. For information on GPL/
LGPL open source software, how to obtain it, and the GPL/LGPL
license, refer to the Yamaha Corporation website
(http://download.yamaha.com/sourcecodes/musiccast/).
Bluetooth protocol stack (Blue SDK)
“x.v.Color” is a trademark of Sony Corporation.
Copyright 1999-2014 OpenSynergy GmbH
All rights reserved. All unpublished rights reserved.
DLNA™ and DLNA CERTIFIED™ are trademarks or registered
trademarks of Digital Living Network Alliance. All rights reserved.
Unauthorized use is strictly prohibited.
APPENDIX ➤ Specifications
En
107
Index
Numerics
2-channel playback 40
3D surround 5
3D surround sound playback 37
3D video 22
4K video 22
A
Access point scan 53
Adaptive DRC 74
ADVANCED 85
Advanced setup menu 85
AirPlay 63
Audio Assign 84
Audio Delay 84
Audio Return Channel (ARC) 22
Audio signal information 78
AUTO POWER STANDBY 86
Auto setup (IntelliBeam) 29
Channel level 42
Channel Out 72
Channel output level adjustment (test sound) 74
CINEMA DSP 102
CINEMA DSP 3D 102
CLEAR VOICE 41
Compressed Music Enhancer 41
D
Bass 84
Beam optimize only 32
Beam Travel Length 70
Beam+Sound optimize 32
Bluetooth 45
Bluetooth (receiving audio) 46
Bluetooth (transmitting audio) 48
Bluetooth settings 82
Bracket 17
Brightness adjustment (front panel display and
indicators) 77
Deep Color 103
Default gateway 79, 80
DHCP 50, 80
Dialog position 41
Digital Sound Projector 101
Dimmer 77
Distance Unit 77
DLNA 60
DNS server (P) 79, 80
DNS server (S) 79, 80
Dolby Atmos 103
Dolby Digital 103
Dolby Digital EX 103
Dolby Digital Plus 103
Dolby Surround 103
Dolby TrueHD 103
DTS 75
DTS Digital Surround 103
DTS Express 103
DTS Neo:6 103
DTS:X 75, 104
DTS-HD High Resolution Audio 103
DTS-HD Master Audio 103
Dynamic Range 75
C
E
Cardboard microphone stand 29
Eco function
B
Encryption method 53, 55, 57, 58
Entertainment 39
Error buzzer 31
Error message 33
F
File format (computers/NAS) 60
Firmware of this unit 78, 86
Firmware update 81, 87
Front panel 8
H
HDCP version 2.2 22
HDMI 104
HDMI audio assignment 84
HDMI Audio Out 76
HDMI cable 22, 23
HDMI control 34, 76
Height channels 37, 101
HOME THEATER CONTROLLER (WLAN) app
5
I
Installing the unit 12
IntelliBeam 29
INTELLIBEAM MIC jack 8
IntelliBeam microphone 29
Internet radio 61
IP address 79, 80
iPod music (AirPlay) 63
iTunes music (AirPlay) 63
L
Language (OSD) 28
Language for menu display
77
43
APPENDIX
➤ Index
En
108
M
MAC address 79
MAC address filter 50, 80
Manual setting (wireless connection) 55
Media sharing setup 60
Menu screen 27
Mobile device music 65
Mounting the unit on a wall 17
Movie 39
MP3 41
Music 39
MusicCast CONTROLLER app 5
N
Network information 79
Network name 81
Network standby 81
Neural:X 75, 104
O
Option menu 83
OSD Language 77
Output timing adjustment (image and sound) 84
WPS 104
WPS PIN code
57
X
x.v.Color 104
T
Target playback mode 40
Test sound 74
Tone adjustment 84
Top panel 8
Treble 84
TV 27, 34
TV audio input 76
V
P
Power cable 26
Pulse Code Modulation (PCM) 104
R
Rear panel 9
Reflection board 99
Remote control 7, 10
Remote control sensor 8
S
Sampling frequency
Security 79
Security key 56, 58
Security software 50
Setup menu 66
Sharing Wi-Fi settings (iOS device) 28, 52
Sound optimize only 32
SSID 53, 54, 79, 104
Stands 16
STATUS indicator 8
Stereo playback 40
Subnet mask 50, 79
Subwoofer settings 73
Subwoofer volume 36
Surround sound 38
System memory 44
78
Video signal information 78
Volume 36
Volume Trim 84
vTuner 61
vTuner ID 79
W
Wi-Fi 104
Wired network connections 25, 51
Wireless Direct 58
Wireless network 51
Wireless subwoofer kit 25
WMA 60
APPENDIX
➤ Index
En
109
© 2015 Yamaha Corporation YH433B0/EN1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising