Yamaha | BD-A1060 | Owner's Manual | Yamaha BD-A1060 Owner's Manual

Yamaha BD-A1060 Owner's Manual
U
Blu-ray Disc Player
BD-A1060
EN
Owner’s Manual
PURE DIRECT
CD MODE
USB
5V
0.5A
CD MODE
SA-CD
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for future reference.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
Caution-i En
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void
your authority, granted by the FCC, to use the product.
2 IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow
all installation instructions. Failure to follow instructions
could void your FCC authorization to use this product in the
USA.
3 NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will not
result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the
users manual, may cause interference harmful to the
operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Corporation of
America A/V Division, 6600 Orangethorpe Ave., Buena
Park, CA 90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party:
Yamaha Corporation of America
A/V Division
Address:
6600 Orangethorpe Avenue
Buena Park, CA 90620, USA
Telephone:
1-714-522-9011
Type of Equipment: Blu-ray Disc Player
Model Name:
BD-A1060
• This device complies with Part 15 of the FCC Rules and RSSGen of IC Rules.
• Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including
interference that may cause undesired operation.
See the “Troubleshooting” section at the end of this manual if
interference to radio reception is suspected.
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying
blaring or distortion - and, most importantly, without affecting your sensitive hearing.
Since hearing damage from loud sounds is often undetectable until it is too late, Yamaha and the Electronic
Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive
volume levels.
IMPORTANT
Please record the serial number of this unit in the space
below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
Caution-ii En
FCC WARNING
Change or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this
device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
Caution-iii En
Caution: Read this before operating your unit.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this sound system in a well ventilated, cool, dry, clean
place-away from direct sunlight, heat sources, vibration, dust,
moisture, and/or cold. For proper ventilation, allow the
following minimum clearances.
Top : 10 cm (4 in)
Rear: 10 cm (4 in)
Side: 10 cm (4 in)
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
Avoid installing this unit where foreign object may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
18 Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power cable from the
outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may become
warm. Turn the power off, then leave this unit alone for
cooling.
20 Install this unit near the AC outlet and where the AC power
plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
This unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if this
unit itself is turned off by p. This state is called the
standby mode. In this state, this unit is designed to
consume a very small quantity of power.
Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
Do not plug in this unit to a wall outlet until all connections
are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and
may cause fire, damage to this unit, and/or personal injury.
Yamaha will not be held responsible for any damage resulting
from use of this unit with a voltage other than specified.
To prevent damage by lightning, keep the power cable
disconnected from a wall outlet or this unit during a lightning
storm.
Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
Be sure to read the “Troubleshooting” section on common
operating errors before concluding that this unit is faulty.
Before moving this unit, press p to set this unit to the
standby mode, and disconnect the AC power plug from the
wall outlet.
Caution-iv En
Do not use this unit within 22 cm (9 inches) of persons
with a heart pacemaker implant or defibrillator implant.
Radio waves may affect electro-medical devices. Do not
use this unit near medical devices or inside medical
facilities.
Where the mains plug or an appliance coupler is used as
the disconnect device, the disconnect device shall
remain readily operable.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
LASER SAFETY
This unit employs a laser. Due to possible eye injury, only
a qualified service person should remove the cover or
attempt to service this device.
DANGER
This unit emits visible laser radiation when open. Avoid
direct eye exposure to beam. When this unit is plugged
into the wall outlet, do not place your eyes close to the
opening of the disc tray and other openings to look into
inside.
Contents
1. Introduction
What you can do with this Player ..................... 2
1
Display Setting.............................................................. 40
Audio Setting ................................................................ 42
System Information....................................................... 43
2
2
2
2
Video/audio output formats............................. 44
Supplied parts .................................................... 2
About discs and files ......................................... 3
Upgrading the software................................................. 46
Wide variety of supported discs and file formats ...........
Enhanced network features.............................................
Easy setup and operations...............................................
High-quality audio features ............................................
Types of discs/files that can be used with this Player ....
Loading a disc.................................................................
Disc precautions .............................................................
Notice for watching 3D video images ............................
Cinavia technology .........................................................
3
4
5
5
5
Controls and functions ...................................... 6
Front panel...................................................................... 6
Rear panel ....................................................................... 7
Remote control ............................................................... 8
2. Connection
Video/audio connections................................. 12
Connecting to a TV via an AV receiver ....................... 13
Connecting to a TV directly ......................................... 13
Connecting to a TV and audio equipment .................... 14
Network connection ......................................... 16
Wireless connection...................................................... 16
Wired connection.......................................................... 16
DLNA server setup....................................................... 17
Other connections ........................................... 18
Connecting Yamaha components that support remote
connections............................................................... 18
USB connection ............................................... 19
Connecting the power cable ........................... 20
3. Playback
Initial settings ................................................... 21
Setting with the Easy Setup .......................................... 21
Wireless connection setting .......................................... 21
Playing back video/music/photo .................... 22
Playing back commercially available discs ..................
Playing back video/music files .....................................
Viewing photos.............................................................
Viewing VUDU contents..............................................
22
22
23
24
Enjoying high-quality sound ........................... 26
Enjoying music CD/SA-CD in high-quality sound
(CD mode)................................................................ 26
Enjoying music and movies with pure high fidelity
sounds (Pure Direct)................................................. 26
Enjoying DLNA playback of mobile device
contents via Wi-Fi Direct .............................
Enjoying smartphone pictures and videos
on the TV screen (Miracast™) .....................
Operating this Player from mobile devices ...
Advanced playback operation ........................
On Screen menu............................................................
Status menu...................................................................
Program play.................................................................
Using Search ................................................................
Enjoying BONUSVIEW™ and BD-Live™.................
Using Picture in Picture function
(secondary audio/video playback) ...........................
Using the feature of BD-Live™ ...................................
Video output formats .................................................... 44
Audio output formats .................................................... 45
Software upgrade ............................................. 46
Troubleshooting ............................................... 47
Power ............................................................................ 47
Basic operation.............................................................. 47
Disc playback................................................................ 47
Picture ........................................................................... 48
Sound ............................................................................ 48
Network......................................................................... 49
Messages on the screen ................................................. 50
Glossary ............................................................ 51
Specifications ................................................... 53
General .......................................................................... 53
Audio performance ....................................................... 53
Input/output................................................................... 53
Copyright ...................................................................... 53
Index .................................................................. 55
New software that provides additional features or
product improvements will be released as needed. We
recommend upgrading the software of this Player to the
latest version periodically. For details, refer to
“Software upgrade” (p. 46).
■ About this manual
– This manual describes how to operate this Player
using a remote control except when it is not
available. Some of these operations are also
available using the front panel buttons.
– Notes contain important information about safety
and operating instructions. Hint(s) indicates a tip for
your operation.
– This manual is printed prior to production. Design
and specifications are subject to change in part as a
result of improvements, etc. In case of differences
between the manual and the product, the product has
priority.
The icons used in this manual
28
29
30
Icons are used to indicate available buttons/functions for a
particular format. For details on playable discs and
formats, see page 3.
33
33
3
4
5. Additional information
27
30
31
32
32
32
2
BD : BD-Video
DVD : DVD-Video, DVD-VR, DVD+VR
CD : Audio CD, Super Audio CD
VIDEO : Video files
MUSIC : Audio files
PHOTO : Photo files
4. Settings
SETUP menu..................................................... 34
Example of SETUP menu operation ............................ 36
General Setting ............................................................. 37
1 En
5
INTRODUCTION
What you can do with this Player
Various discs
Network streaming
contents
Wireless network
(WPS supported)
USB contents
PC/NAS contents
(DLNA)
Smartphone contents
(Miracast)
Mobile device contents
(Wi-Fi Direct)
■ Wide variety of supported discs and file formats
– Blu-ray Disc™, DVDs, SA-CDs and CDs (p. 30)
– Blu-ray 3D™ (p. 12), BONUSVIEW™ and BD-Live™ (p. 32)
– Video, music and photo files on DVD-R/RW discs, CD-R/RW discs and USB memory devices (p. 22)
■ Enhanced network features
–
–
–
–
–
Enjoying DLNA server (PC or NAS) contents (p. 17)
Enjoying streaming contents on the network services (p. 24)
Operating this player from mobile devices via network (AV CONTROLLER) (p. 29)
Enjoying smartphone pictures and videos on the TV screen (Miracast™) (p. 28)
Direct network connection to a mobile device (Wi-Fi Direct) (p. 27)
■ Easy setup and operations
–
–
–
–
Quick and easy initial setup (p. 21)
Automatic wireless setup with the WPS (Wi-Fi Protected Setup) (p. 21)
Software upgrade via network or USB (p. 46)
Sequential operations of the TV, AV receiver and this Player (HDMI Control) (p. 37)
■ High-quality audio features
–
–
–
–
–
CD mode for hi-quality and accurate disc playback for audio CD and SA-CD (p. 26)
Pure Direct mode for hi-quality audio for any audio sources (p. 26)
Up to 192-kHz/24-bit audio file formats including WAV, FLAC and ALAC supported (p. 3)
Super Audio CD (SA-CD) and DSD audio file (2.8/5.6 MHz) supported (p. 4)
XLR balanced output jacks for transmitting high-quality audio to a power amplifier (p. 15)
Supplied parts
Make sure the following accessories are provided with the product.
Remote control
2 En
Batteries (×2)
(AAA, R03, UM-4)
Power cable
■ Types of discs/files that can be
used with this Player
– 12 cm (5”) and 8 cm (3”) discs can be played back in
this Player. Do not use an 8 cm (3”) to 12 cm (5”)
adapter.
– Use discs that conform to compatible standards as
indicated by the presence of official logos on the
disc label. Playback of discs not complying with
these standards is not guaranteed. In addition, the
image quality or sound quality is not guaranteed
even if the discs can be played back.
Media Type
Recording Format
BD-ROM/BD-R/
BD-RE
BD-Video/Data files
DVD-ROM
DVD-Video
DVD-R/DVD-R
DL/DVD-RW
DVD-Video/DVD-VR/AVCHD/Data files
DVD+R/DVD+R
DL/DVD+RW
DVD-Video/DVD+VR/AVCHD/Data files
CD-ROM
CDDA/HDCD
CD-R/CD-RW
CDDA/Data files
SA-CD
SA-CD
USB*
Data files
DLNA
Data files
Playable audio
file formats
Playable video
file formats
Playable photo
file formats
MUSIC
VIDEO
PHOTO
MKV with H.264
(.mkv)
MPEG PS (.mpeg/
.mpg)
MPEG TS (.ts)
MPEG-4 (.mp4)
VOB (.vob)
AVI (.avi)
ASF (.asf)
WMV (.wmv) *5
– Playback of a file listed in the chart above is not
guaranteed depending on methods of file creation or
codecs used.
– Playback of all files on the disc, USB memory
device and network is not guaranteed.
– A copyright protected file cannot be played back.
– When using DLNA, a file needs to meet the DLNA
sever requirement.
Region management information for
Blu-ray Disc/DVD videos
– Blu-ray Disc/DVD video players and discs have
region codes, which dictate the regions in which a
disc can be played. Verify the region code mark on
the rear panel of this Player.
– For a Blu-ray Disc, the disc can be played back on
this Player with the same region code mark, or the
region code “ABC” mark.
– For a DVD disc, the disc can be played back on this
Player with the same region code mark, or the region
code “ALL” mark.
Region management information
* This Player is compatible with a USB memory device
formatted with FAT 16/32 and NTFS.
MP3 (.mp3) *1
WMA (.wma) *2
AAC (.aac/.m4a)
WAV (.wav) *3
FLAC (.flac) *3
ALAC (.m4a) *3
DSDIFF (.dff) *4
DSF (.dsf) *4
Notes
JPEG (.jpeg/.jpg)
GIF (.gif)
PNG (.png)
*1 Sampling frequency within 32-48 kHz (Stereo) and
bitrate within 8-320 kbps
*2 Sampling frequency within 32-48 kHz (Stereo) and
bitrate within 32-192 kbps
*3 Sampling frequency of up to 192 kHz/24 bit (LPCM/
Stereo)
*4 Sampling frequency of 2.8/5.6 MHz
*5 WMV9 (maximum resolution: 1,920 x 1,080)
Destination
U.S.A. and Canada
BD-Video
Region code “A” or
“ABC”
DVD-Video
Region number “1”
or “ALL”
1
Europe
Region code “B” or
“ABC”
Region number “2”
or “ALL”
2
Asia and Taiwan
Region code “A” or
“ABC”
Region code “A” or
“ABC”
Region code “B” or
“ABC”
ALL
Region number “4”
or “ALL”
4
Australia
ALL
Region number “3”
or “ALL”
3
Central and South
America
ALL
ALL
Region number “4”
or “ALL”
4
ALL
3 En
Introduction
1
About discs and files
About discs and files
Region management information
Destination
Russia
BD-Video
Region code “C” or
“ABC”
DVD-Video
Region number “5”
or “ALL”
5
ALL
Notes
About Super Audio CD (SA-CD)
– Audio format based upon the current CD standards
but includes a greater amount of information that
provides higher quality sound. There are three types
of discs: single layer, dual layer and hybrid discs.
The hybrid disc can be played on existing CD
players as well as Super Audio CD players since it
contains both standard audio CD and Super Audio
CD information.
– Blu-ray Disc/DVD video operations and functions
may be different from the explanations in this
manual and some operations may be prohibited due
to disc manufacturer’s settings.
– If a menu screen or operating instructions are
displayed during playback of a disc, follow the
operating procedure displayed.
– Playback for some of the discs may not be possible
depending on the disc.
– Finalize all recording media that is played back in
this Player.
– “Finalize” refers to a recorder processing a recorded
disc so that it will play in other players/recorders as
well as this Player. Only finalized discs can be
played back in this Player. (This Player does not
have a function to finalize discs.)
Super Audio CD disc type
Dual layer disc
Hybrid layer disc
Single layer disc
HD layer
HD layer
CD layer
HD layer
Hybrid Super Audio CD disc
1 CD layer that plays on any
CD player
High Density layer containing:
2 - High Quality DSD Stereo
3 - High Quality DSD Multi-channel
Hint
– You can select the output audio signals from DSD or
PCM (p. 42).
Note
– This unit does not show the text data included in the
discs on the front panel display.
■ Loading a disc
– Insert the disc with the label facing up.
– In case of the disc recorded on both sides, face down
the side to play back.
Notes
– Playback may begin automatically, depending on the
disc and setting of this Player.
– The menu may be displayed first, depending on the disc.
– The disc load time may vary depending on the disc.
4 En
About discs and files
Be careful of scratches and dust
– Blu-ray Disc, DVD and CD discs are sensitive to dust,
fingerprints and especially scratches. A scratched disc
may not be able to be played back. Handle discs with
care and store them in a safe place.
Proper disc storage
Place the disc in the center of the disc case
and store the case and disc upright.
Avoid storing discs in locations subject to
direct sunlight, close to heating appliances
or in locations of high humidity.
Do not drop discs or subject them to
strong vibrations or impacts.
Avoid storing discs in locations where
there are large amounts of dust or
moisture.
Handling precautions
– If the surface is soiled, wipe gently with a
soft, damp (water only) cloth. When
wiping discs, always move the cloth from
the center hole toward the outer edge.
– Do not use record cleaning sprays,
benzene, thinner, static electricity
prevention liquids or any other solvent.
– Do not touch the surface.
– Do not stick paper or adhesive labels to the disc.
– If the playing surface of a disc is soiled or scratched,
the Player may decide that the disc is incompatible
and eject the disc tray, or it may fail to play the disc
correctly. Wipe any dirt off the playing surface with
a soft cloth.
Cleaning the pick up lens
– Never use commercially available cleaning discs.
The use of these discs can damage the lens.
– Request the nearest service center approved by
Yamaha to clean the lens.
■ Notice for watching 3D video
images
1
– Some people may experience discomfort (such as
eye strain, fatigue, or nausea) while watching 3D
video images. We recommend that all viewers take
regular breaks while watching 3D video images.
– If you experience any discomfort, stop watching the
3D video images until the discomfort subsides.
Consult a doctor if you experience severe
discomfort.
– Read the owner’s manuals (Blu-ray Disc and TV)
and/or the caution messages that appear on the TV
carefully.
– The vision of young children (especially those under
six years old) is still under development. Consult
your doctor (such as a pediatrician or eye doctor)
before allowing young children to watch 3D video
images.
– Adults should supervise young children to ensure
they follow the recommendations described above.
■ Cinavia technology
– Cinavia technology is a part of the content protection
system included in your Blu-ray Disc Player.
Note
– The following messages may be displayed and
playback stopped or audio outputs temporarily
muted by your Blu-ray Disc player if you are playing
an unauthorized copy of content that is protected by
Cinavia technology.
These messages are displayed in English only.
Playback stopped. The content being played is
protected by Cinavia® and is not authorized for
playback on this device.
For more information, see http://www.cinavia.com.
Message Code 1.
Audio outputs temporarily muted. Do not adjust
the playback volume. The content being played
is protected by Cinavia® and is not authorized
for playback on this device.
For more information, see http://www.cinavia.com.
Message Code 3.
Cinavia Notice
This product uses Cinavia technology to limit the use of
unauthorized copies of some commercially-produced film
and videos and their soundtracks. When a prohibited use
of an unauthorized copy is detected, a message will be
displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at
the Cinavia Online Consumer Information Center at
http://www.cinavia.com. To request additional
information about Cinavia by mail, send a postcard with
your mailing address to: Cinavia Consumer Information
Center, P.O. Box 86851, San Diego, CA, 92138, USA.
5 En
Introduction
■ Disc precautions
Controls and functions
■ Front panel
PURE DIRECT
CD MODE
CD MODE
USB
5V
SA-CD
0.5A
1 2
3 4
5
6
1 p (On/Standby)
Turns this Player on/Sets to standby mode.
Press and hold p on the front panel for more than 5
seconds to reset this Player (system reset).
2 USB connector (p. 19)
3 CD MODE indicator
Lights up when the CD mode is enabled (p. 26).
4 CD MODE
Enables/disables the CD mode (p. 26).
5 SA-CD indicator
Lights up when an SA-CD is loaded and the SA-CD
layer (p. 4) is selected.
6 Front panel display
Displays various information for operational status.
7 Disc tray door
8
7
8 9 0
B
C
D
9
(Search backward/Skip backward)
Press to skip backward, and press and hold to search
backward.
0
(Search forward/Skip forward)
Press to skip forward, and press and hold to search
forward.
A
(Play)
Starts a playback.
B
(Pause)
Pauses a playback.
C
(Stop)
Stops a playback.
D PURE DIRECT
Enables/disables the Pure Direct mode (p. 26).
(Eject)
Opens/Closes the disc tray.
Note
– Remove the protective film from the front panel before operating the Player.
6 En
A
Controls and functions
■ Rear panel
Introduction
1
AC IN
COAXIAL
NETWORK
OPTICAL
HDMI
OUT
IN
REMOTE CONTROL
BALANCED OUT
ANALOG OUT
5
6
7
BALANCED OUT
USB
DIGITAL OUT
1
2
3 4
8
1 HDMI (p. 12)
5 REMOTE CONTROL (IN/OUT) (p. 18)
2 DIGITAL OUT (COAXIAL/OPTICAL) (p. 14)
6 BALANCED OUT (L/R) (p. 15)
3 USB (p. 19)
7 ANALOG OUT (L/R) (p. 14)
4 NETWORK (p. 16)
8 AC IN (p. 20)
7 En
Controls and functions
■ Remote control
Note
1 Infrared signal transmitter: Outputs infrared
signal. Aim this window to the remote control sensor
(p. 11).
–
2 p: Turns this Player on or sets it to standby mode.
will appear on the top left corner of the screen
when the pressed button is not available.
5 SUBTITLE BD DVD VIDEO : Changes subtitle
languages (p. 52) if available. You can also select this
item from On Screen menu (p. 30).
3
5
6
7
8
9
:
A
B
C
RED
GREEN
YELLOW
BLUE
SUBTITTLE
N
AUDIO
ZOOM
SETUP
CLEAR
SEARCH
MIRACAST
PURE
DIRECT
HOME
CD
MODE
TOP MENU
POP-UP MENU
O
P
Q
R
S
7 ANGLE BD DVD : Changes the camera angle if
video is recorded with multiple angles. The Angle
Mark (
) is displayed on the screen when this
function is available. You can also select this item from
On Screen menu (p. 30).
Note
– Angle Mark is displayed only when the Angle Mark
is set to on (p. 38).
ENTER
RETURN
ON SCREEN
t
F
G
H
I
J
K
L
M
6 AUDIO BD DVD VIDEO : Changes the audio
language or format. You can also select this item from
On Screen menu (p. 30).
ANGLE
D
E
: Opens/closes the disc tray.
4 Color buttons BD : Use these buttons according to
on-screen instructions.
1
2
4
3
8 ZOOM DVD VIDEO PHOTO : Zooms in/out. The
size of the screen will change each time you press the
button (zoom in/out: 3 steps each).
9 VUDU: Starts VUDU (p. 24).
0 MIRACAST: Starts Miracast (p. 28).
SETUP
STATUS
2ND AUDIO
PAGE
PIP
PROGRAM
DIMMER
SHUFFLE
REPEAT
A/B
SA-CD/CD
U
V
W
A SETUP: Displays SETUP menu screen (p. 34).
B HOME: Displays the HOME menu screen (p. 22).
C TOP MENU BD DVD : Displays the top menu
screen if the disc contains a menu. Select the desired
item using 5/a/2/3 and ENTER.
Note
– Specific operations may be different depending on
the disc. Follow the instructions of each menu
screen.
D Cursor buttons (5/a/2/3): Moves the focus in the
menu screen.
ENTER: Selects the focused menu/item.
E RETURN: Returns to the previous menu or screen,
etc.
8 En
Controls and functions
BD
DVD
CD
VIDEO
MUSIC
PHOTO
: Stops playback.
: Pauses playback.
: Plays back contents.
/
L SHUFFLE DVD CD VIDEO MUSIC
Selects shuffle play mode (p. 30).
: Skips backward/forward.
/
BD
DVD
CD
VIDEO
K PROGRAM DVD CD : Sets the order of playback
(p. 32). You can set up to 15 tracks (for an audio disc)
or titles/chapters (DVD-Video).
MUSIC :
Searches backward/forward. The search speed will
change each time you press the button (search
backward/forward: 5 steps each). Press
to resume
normal playback.
PHOTO : Changes the speed of a slide show (slower/
faster: 3 steps).
/
BD DVD CD VIDEO MUSIC :
Press for instant search/replay. Instant search skips the
content 30 seconds. Instant replay replays the content
from 10 seconds before.
G SETUP: Displays SETUP menu screen (p. 34).
H STATUS: Displays the playback information (p. 31).
I PIP BD : Turns on/off the Picture in Picture (p. 33).
PIP Mark (
) is displayed on the screen when this
function is available. You can also select this item from
On Screen menu (p. 30).
Note
– PIP Mark is displayed only when the PIP Mark is set
to on (p. 38).
PHOTO :
M DIMMER: Changes the brightness of the front panel
display in four steps.
N Number buttons: Enter numbers, or during
playback, jump to the track/chapter corresponding to
the number you input. These buttons may not be
available depending on the disc type and playback
condition.
O SEARCH BD DVD CD VIDEO MUSIC :
Jumps to a specified point during playback. For details
on this function, refer to “Using Search” (p. 32). You
can also select this item from status menu (p. 31).
P CLEAR: Clears entered number/set item.
Q PURE DIRECT: Enables/disables the Pure Direct
mode (p. 26).
R CD MODE: Enables/disables the CD mode (p. 26).
S POP-UP/MENU BD DVD : Displays pop-up menu.
The menu contents displayed vary depending on the
disc. For details on how to see and operate the pop-up
menu, refer to the manual for the disc.
The top menu screen may be displayed by pressing
POP-UP/MENU depending on the DVD.
T ON SCREEN: Displays On Screen menu (p. 30).
U PAGE (+/-) : Moves to a previous/next page when you
select an item on the content list menu.
J 2ND AUDIO BD : Selects the secondary audio of the
Picture in Picture (p. 33) or audio commentaries. The
Secondary Audio Mark (
) is displayed on the
screen when this function is available (p. 42). You can
also select this item from On Screen menu (p. 30).
Note
– Secondary Audio Mark is displayed only when
Secondary Audio Mark is set to on (p. 38).
Continued to the next page. \
9 En
1
Introduction
F Control buttons
Controls and functions
V REPEAT BD
1
2
5
6
7
8
9
:
A
B
C
RED
GREEN
YELLOW
MUSIC
: Repeats the chapter being played back.
BLUE
: Repeats the folder being played back.
SUBTITTLE
N
AUDIO
: Repeats all tracks/files on the disc.
: Repeats the track/file being played back.
ANGLE
ZOOM
SETUP
CLEAR
SEARCH
MIRACAST
PURE
DIRECT
HOME
CD
MODE
TOP MENU
POP-UP MENU
O
P
Q
R
S
ENTER
A/B BD DVD CD VIDEO MUSIC : Plays back
a specific part you want to repeat.
1 Press A/B at the scene where you want to set the
start point. “A-” is displayed on the screen.
2 Press A/B again at the scene where you want to set
the end point. “A-B” is displayed on the screen.
Repeat playback starts.
3 To cancel the repeat playback, press A/B. “A-B”
disappears and the repeat playback is finished.
RETURN
ON SCREEN
t
Note
– This function cannot be performed depending on the
specifications of the disc.
F
G
H
I
J
K
L
M
VIDEO
: Repeats the title being played back.
D
E
CD
below will change each time you press the button.
3
4
DVD
PHOTO : Changes repeat mode. Repeat mode shown
SETUP
STATUS
2ND AUDIO
PAGE
PIP
PROGRAM
DIMMER
SHUFFLE
REPEAT
A/B
SA-CD/CD
U
V
W
W SA-CD/CD: Selects the layer to be played when an
SA-CD/CD hybrid disc (p. 4) is played back.
Hint
– The SA-CD indicator (p. 6) on the front panel lights
up when an SA-CD is loaded and the SA-CD layer is
selected.
Notes
– This operation is available only when no disc is
loaded.
– Audio signals are not output from the COAXIAL or
OPTICAL jack when the SA-CD layer is selected.
10 En
Controls and functions
1
3
2
Notes
– Change both batteries when the operation range of
the remote control decreases.
– Use AAA, R03, UM-4 batteries.
– Make sure that the polarities are correct. Refer to the
illustration inside the battery compartment.
– Remove the batteries if the remote control is not to
be used for an extended period of time.
– Do not use old batteries together with new ones.
– Do not use different types of batteries (such as
alkaline and manganese batteries) together. Read the
packaging carefully as these different types of
batteries may have the same shape and color.
– If the batteries have leaked, dispose of them
immediately. Avoid touching the leaked material or
letting it come into contact with clothing, etc. Clean
the battery compartment thoroughly before installing
new batteries.
– Do not throw away batteries with general house
waste; dispose of them correctly in accordance with
your local regulations.
– Keep batteries away from children. If a battery is
accidentally swallowed, contact your doctor
immediately.
– When not planning to use the remote control for long
periods of time, remove the batteries from the
remote control.
– Do not charge or disassemble the supplied batteries.
1
ID function
When using multiple Yamaha products, the remote control
may work on another Yamaha product or another remote
control may work on this Player. In this case, change the
remote control ID to prevent unwanted operation. If you
have changed the remote control ID, make sure that you
select the same ID for the main unit.
The default setting is ID1.
1 Remote control setting
To change the ID from ID1 to ID2, press and hold
the red color button and 2 of number button
simultaneously for 7 seconds. To change the ID
from ID2 to ID1, press and hold the red color button
and 1 of number button simultaneously for 7
seconds.
2 Main unit setting
Press and hold
and
on the
front panel simultaneously for 2 seconds to display
current ID when:
– No disc is inserted in this Player.
– The disc tray is closed.
– Playback is stopped.
– “NO DISC” is displayed on the front panel
display.
Keep pressing and holding the keys for another 2
seconds to change the ID between ID1 and ID2.
Note
– If the remote control is without batteries for a few
minutes or if exhausted batteries remain in the
remote control, the remote control ID is
automatically set to ID1. If you want to use the
remote control in ID2 setting, install new batteries
and set the remote control ID again.
Approximate operating range of
remote control
Remote control sensor
30°
30°
6 m (20 ft)
11 En
Introduction
Loading the batteries in the remote
control
CONNECTION
Video/audio connections
Make the corresponding video/audio cable connections depending on the equipment you want to use.
Hints
– See page p. 44 for information on the video/audio output formats.
– Prepare commercially available cables required for connections. The type and number of cables you need vary
depending on the equipment to be connected.
Enjoying video/audio using a TV and an AV receiver
Refer to “Connecting to a TV via an AV receiver” (p. 13).
AV receiver
TV
This Player
Video/audio
(HDMI)
Video (HDMI)
Speakers
♪
Audio
♪
Enjoying video/audio using only a TV
Refer to “Connecting to a TV directly” (p. 13).
TV
This Player
Video/audio
(HDMI)
♪
♪
Enjoying video/audio using a TV and audio equipment
Refer to “Connecting to a TV and audio equipment” (p. 14).
TV
This Player
Video (HDMI)
Audio equipment
(such as sound bar)
Audio
(coaxial, optical, analog or XLR balanced)
About HDMI
To enjoy high quality video and digital sound through the
HDMI terminal, use commercially available HIGH
SPEED HDMI cables that have the HDMI logo (as shown
on the back cover).
Hints
– For information on the HDMI Control function, refer
to “HDMI Control” (p. 37).
– To change the output mode of HDMI terminal,
configure “HDMI” (p. 42) in Audio Setting.
12 En
♪
♪
Connection for the playback of Blu-ray
3D Discs
To enjoy Blu-ray 3D Discs on this Player, your system
must meet the following conditions.
– Your TV and AV receiver (if available) must support
the 3D feature.
– 3D Output in Display Setting (p. 40) is set to “Auto”.
Video/audio connections
■ Connecting to a TV directly
Connect this Player to the TV with an HDMI cable.
Connect this Player to the AV receiver and the AV
receiver to the TV with HDMI cables.
For details on speaker connections, refer to the owner’s
manuals of the AV receiver and speakers.
2
Caution!
Caution!
Do not connect the power cable of this
Player until all connections are completed.
Do not connect the power cable of this
Player until all connections are completed.
This Player
This Player
COAXIAL
COAXIAL
NETWORK
NETWORK
RE
HDMI
OPTICAL
RE
USB
OPTICAL
HDMI
DIGITAL OUT
USB
DIGITAL OUT
HDMI terminal
HDMI terminal
HDMI
HDMI
HDMI cable
HDMI cable
HDMI IN
HDMI input
AV receiver
Speaker
connections
Speakers
HDMI OUT
HDMI output
HDMI input
HDMI IN
HDMI cable
TV
HDMI input
HDMI IN
TV
13 En
Connection
■ Connecting to a TV via an AV
receiver
Video/audio connections
■ Connecting to a TV and audio equipment
Connect this Player to the TV with an HDMI cable, and this Player to the audio equipment with an audio cable (digital
optical, digital coaxial or stereo pin cable).
Caution!
Do not connect the power cable of this Player until all connections are completed.
This Player
COAXIAL
NETWORK
HDMI
OPTICAL
OUT
IN
REMOTE CONTROL
BALANCED OUT
ANALOG OUT
USB
DIGITAL OUT
COAXIAL
OPTICAL, COAXIAL or
ANALOG OUT L/R jacks
HDMI output
HDMI
OPTICAL
ANALOG OUT
Audio cable
(digital optical, digital coaxial or
stereo pin cable)
HDMI cable
HDMI input
HDMI IN
COAXIAL
OPTICAL
ANALOG
Audio input
(digital optical, digital coaxial or
analog stereo)
TV
Audio equipment
(such as sound bar)
Hints
– To change the output mode of COAXIAL/OPTICAL jacks, configure “Coaxial / Optical” (p. 42) in Audio
Setting.
– If the playback audio is output from both the TV speakers and audio equipment, set HDMI in Audio Setting to Off
to disable the audio output to the TV.
– Audio signals of SACDs cannot be output from the COAXIAL or OPTICAL jack (p. 45).
14 En
Video/audio connections
XLR balanced connection
If your audio equipment is equipped with the XLR balanced input jacks, you can connect this player to the audio
equipment (such as an AV receiver) with an XLR balanced cable.
For details on speaker connections, refer to the owner's manual of the audio equipment and speakers.
Connection
2
This Player
COAXIAL
NETWORK
HDMI
OPTICAL
OUT
IN
REMOTE CONTROL
BALANCED OUT
ANALOG OUT
BALANCED OUT
USB
DIGITAL OUT
HDMI output
BALANCED OUT L/R jacks
HDMI
BALANCED OUT
BALANCED OUT
(female connector)
XLR balanced cable
HDMI cable
(male connector)
HDMI input
XLR balanced input
HDMI IN
BALANCED IN
TV
Audio equipment
(such as AV receiver)
Speaker
connections
Speakers
Note
– The pin assignments for the BALANCED OUT (L/R) jacks of this Player are shown below. Before connecting an
XLR balanced cable, refer to the instruction manual of your device and verify that its XLR balanced input jacks
are compatible with the pin assignments.
1. GND
2. HOT
3. COLD
15 En
Network connection
By connecting this Player to the network (wireless or wired), you can use the following features.
– Playing back DLNA server (PC or NAS) contents (p. 22)
– Playing BD-Live compatible discs (p. 32)
– Operating this Player from mobile devices (AV CONTROLLER) (p. 29)
Notes
– To use the network services or BD-Live feature, a broadband internet connection is required.
– Refer to the operation manual of the equipment you have as the connected equipment and connection method may
differ depending on your network environment.
– Use a network cable/router supporting 10BASE-T/100BASE-TX.
Hint
– If you are using a router that supports DHCP, you do not need to configure any network settings for this Player, as
the network parameters (such as the IP address) will be assigned automatically to it. You only need to configure
the network settings if your router does not support DHCP or if you want to configure the network parameters
manually (p. 39).
■ Wireless connection
■ Wired connection
By using the Wi-Fi feature of this Player, you can connect
this Player to your network (router) wirelessly. To use the
Wi-Fi feature, refer to “Wireless connection setting”
(p. 21) and configure the wireless connection setting.
Connect this Player to your network (router) with a
commercially available Shielded Twisted Pair (STP)
network cable.
This Player
This Player
COAXIAL
NETWORK
HDMI
OPTICAL
OUT
IN
REMOTE CONTROL
USB
DIGITAL OUT
NETWORK
NETWORK
terminal
Internet
Modem
Router
PC
Network cable
LAN terminal
LAN
Internet
16 En
Modem
Router
PC
Network connection
■ DLNA server setup
Notes
– To use DLNA features, all the devices must be connected to the same network.
– To use a NAS as a DLNA server, the NAS must be compatible with DLNA.
DLNA
This Player
DLNA server
(PC or NAS)
Remote control
Controller
(mobile device)
Media sharing setting on DLNA server
To play back multimedia contents stored on your DLNA
server (PC or NAS), first you need to configure the media
sharing setting on the DLNA server software installed on
the DLNA server.
Hint
– For information about DLNA server setting or file
formats supported by DLNA server, refer to the
owner’s manuals of your DLNA server and its
software.
1 Turn on your DLNA server (PC or NAS) and this
Player.
2 If you are using a PC as a DLNA server, check that
DLNA server software (such as Windows Media
Player 12) is installed on your PC.
3 On your DLNA server, enable media sharing and allow
media to be shared with this Player.
Now the DLNA server setting is complete. To enjoy
the DLNA server contents on this Player, select a
DLNA server and multimedia file from the HOME
menu (p. 22).
2
Connection
By using DLNA, you can share multimedia contents (such as videos, music and photos) stored on your DLNA server
(PC or NAS) connected to your network, and enjoy those contents with this Player.
In addition, you can use your mobile device (such as a smartphone and a tablet) as a wireless controller to operate this
Player through the network.
To use the DLNA features, perform the following DLNA server setup after making the network connection (p. 16).
Using a mobile device as a media
controller
If you have a mobile device (such as smartphone and
tablet) that supports the Digital Media Controller (DMC)
feature, you can operate this Player from your smart phone
or tablet through the network.
Hints
– To allow the mobile device to control this Player, set
DMC Control (p. 39) in the SETUP menu to Enable
(default).
– To use this function, a DMC application must be
installed on your mobile device.
Using the Wi-Fi Direct function for
DLNA
You can enjoy DLNA playback of mobile device contents
via the Wi-Fi Direct function (p. 27).
Hint
– To use DLNA playback on the mobile device, a
DLNA DMC/Server application must be installed on
your mobile device.
17 En
Other connections
■ Connecting Yamaha components that support remote connections
If you are using Yamaha components that support remote connections, you can transmit remote control signals by
connecting the REMOTE CONTROL (IN/OUT) jacks with monaural 3.5 mm mini-plug cables.
Caution!
Do not connect the power cable of this Player until all connections are completed.
This Player
COAXIAL
NETWORK
HDMI
OPTICAL
OUT
IN
REMOTE CONTROL
BALANCED OUT
ANALOG OUT
USB
DIGITAL OUT
OUT
IN
REMOTE CONTROL
REMOTE CONTROL (IN/OUT) jacks
Monaural 3.5 mm mini-plug cable
(commercially available)
Remote control
input
Remote control
output
IN
OUT
Yamaha component
(such as CD player)
Yamaha component
(such as AV receiver)
Hint
– If you use a Yamaha AV receiver that supports SCENE link (via remote control connection) playback, you can
control playback of this Player in conjunction with AV receiver operations. For details, refer to the owner's
manual of the AV receiver.
18 En
USB connection
Notes
– Yamaha cannot guarantee that all brands’ USB memory devices will operate with this Player.
– Connect a USB memory device to one of the USB connectors (front/rear) of this Player when using BD-Live
feature (p. 33).
This Player
This Player
CD MODE
COAXIAL
NETWORK
CD MODE
USB
5V
0.5A
HDMI
OPTICAL
USB
DIGITAL OUT
USB
USB connector (front)
USB memory device
USB connector (rear)
USB
USB memory device
19 En
2
Connection
By connecting a USB memory device to the USB connector on the front or the rear panel of this Player, you can play
multi-media files stored on the USB memory device (p. 22).
Connecting the power cable
After all connections are completed, plug the supplied
power cable into the AC IN on the rear of the Player. Then
plug into AC outlet.
AC IN
BALANCED OUT
To AC outlet
20 En
PLAYBACK
Initial settings
■ Setting with the Easy Setup
3 Press 2/3 to select Yes, then press ENTER.
Easy Setup allows you to set language, resolution, and
screen aspect ratio easily. Easy Setup screen is displayed
when you turn this Player on for the first time after
purchase. Same setting can be performed from SETUP
menu = System = Easy Setup.
3
Playback
1 When Easy Setup screen is displayed, press ENTER to
start Easy Setup.
4 Press 2/3 to select one of the following setup
methods, then press ENTER.
2 Set the language, resolution, and screen aspect ratio by
following the on-screen messages.
Notes
– When no picture is displayed after Easy Setup is
completed, refer to “Troubleshooting” (p. 48).
– A warning message concerning 3D video playback
appears when this Player is turned on. Press ENTER
to dismiss the message or CLEAR to disable it
(p. 37).
■ Wireless connection setting
To connect this Player to your network (router) wirelessly,
follow the procedure below to configure the wireless
connection setting.
If your router (access point) supports the WPS (Wi-Fi
Protected Setup) function, you can use the auto setup
method to connect this Player to the router without
entering network information (such as SSID) manually.
1 Press SETUP to display the SETUP menu screen.
2 Select General Setting = Network = Connection
setting = Wireless.
Scan: Select this option to search for available wireless
networks. When the network list is displayed, select the
SSID to be connected and enter the password.
Manual: Select this option to enter the network
information (such as SSID) manually.
Auto: Select this option to use the WPS function. Select
PBC (Push Button Configuration) or PIN code method,
then follow the on-screen messages.
Notes
– For details on operations of your router (access
point), refer to the owner’s manual of it.
– When the WPS function does not work, select
“Scan” or “Manual” to configure the wireless
connection settings.
– Devices that use a 2.4 GHz frequency band, such as
a microwave, or other wireless devices, may
interrupt the wireless communication. Move this
Player away from such devices, or turn off such
devices.
– The speed of a wireless network connection depends
on your network environment (router type, distance
between the router and this Player, installation
places, etc.). In case the sound or video is interrupted
during playback, move this Player closer to the
router or change the orientation of this Player or the
antenna of the router.
21 En
Playing back video/music/photo
■ Playing back commercially
available discs
You can enjoy commercially available Blu-ray discs,
DVDs, and CDs.
1 Open the disc tray and load the disc.
Playback starts automatically.
Remote control buttons used for CD
playback
Remote control buttons
Function
Stops playback.
Pauses playback.
Hints
Starts playback.
– If playback does not start automatically, press 3
(playback).
– The top menu screen may be displayed when a Bluray disc or a DVD is loaded.
– Some functions may not work or work differently
from the manual descriptions depending on the disc.
– For information on the supported discs, refer to
“About discs and files” (p. 3).
Remote control buttons used for Bluray disc/DVD playback
Remote control buttons
Function
Stops playback.
Pauses playback.
Starts playback.
Control
buttons
/
Skips 10 seconds backward or
30 seconds forward.
/
Searches backward or forward.
The search speed changes each
time the button is pressed.
/
Skips to the beginning of the
chapter (previous chapter if the
button is pressed repeatedly) or
next chapter.
Number buttons
Skips to the specified chapter
during playback.
STATUS
Displays the playback
information (p. 31).
Menu
operation
buttons
Cursor
buttons
Selects an item (such as
chapters).
Cursor
buttons
Confirms the selected item.
RETURN
Returns to the previous menu or
screen.
TOP MENU
Displays the top menu screen of
the disc.
POP-UP/MENU
Displays the pop-up menu
screen of the Blu-ray disc or disc
menu screen of the DVD.
22 En
Control
buttons
/
Skips 10 seconds backward or
30 seconds forward.
/
Searches backward or forward.
The search speed changes each
time the button is pressed.
/
Skips to the beginning of the
track (previous track if the
button is pressed repeatedly) or
next track.
Number buttons
Skips to the specified track
during playback.
STATUS
Displays the playback
information (p. 31).
■ Playing back video/music files
You can enjoy video/music files stored on own discs (such
as DVD-R/RWs), USB memory devices or DLNA servers
(PC/NAS).
Hint
– For information on the supported files, refer to
“About discs and files” (p. 3).
1 Perform the following operation according to your
purpose.
To play back files on the disc:
Open the disc tray and load the disc.
To play back files on the USB memory device:
Connect the USB memory device to the USB
connector.
To play back files on the DLNA server:
Check that the DLNA server is turned on and
connected to the network.
Playing back video/music/photo
2 Press HOME.
The HOME menu screen is displayed.
5 Use the cursor buttons (5/a) to select the desired file
and press ENTER.
Playback of the file starts.
Remote control buttons used for file
playback
3
Function
Stops playback.
Pauses playback.
Starts playback.
Hint
– You cannot display the HOME menu screen during
playback of a commercially available disc, DVD, or
video files. To display the HOME menu screen, first
stop playback.
3 Use the cursor buttons (5/a) to select the desired item
(disc, USB or DLNA) and press ENTER.
/
Skips 10 seconds backward or
30 seconds forward.
/
Searches backward or forward.
The search speed changes each
time the button is pressed.
/
Skips to the beginning of the file
(previous file if the button is
pressed repeatedly) or next file.
Control
buttons
STATUS
Displays the playback
information (p. 31).
■ Viewing photos
You can enjoy photos stored on own discs (such as DVDR/RWs), USB memory devices or DLNA servers (PC/
NAS).
Hint
– For information on the supported files, refer to
“About discs and files” (p. 3).
1 Refer to “Playing back video/music files” and follow
Steps 1 to 3.
4 Use the cursor buttons (5/a) to select “Music”,
“Video” or “AVCHD”, and press ENTER.
If you selected “DLNA” in Step 3, select the desired
DLNA server in Step 4.
Hint
– If you load a commercially available photo DVD,
slide show playback may start automatically. In this
case, you do not need to perform the following steps.
2 Use the cursor buttons (5/a) to select “Photo” and
press ENTER.
Hints
– To return to previous screen, press RETURN or
cursor key (2), or select
in the menu screen.
– “AVCHD” is a file format for recording highresolution videos on the recording discs (such as
DVD-Rs).
Hint
– To return to previous screen, press RETURN or
cursor key (2), or select
in the menu screen.
23 En
Playback
Remote control buttons
Playing back video/music/photo
3 Use the cursor buttons (5/a) to select the desired
photo and press ENTER.
Slide show playback starts from the selected photo.
■ Viewing VUDU contents
You can enjoy VUDU contents on this Player.
Notes
Hints
– If you select photos during playback of a CD or a
music file, you can enjoy slide show while listening
to music.
– You can use the slide show as the screen saver.
When using the slide show as the screen saver,
create the “autopict” folder under the root directory
of the USB memory device and put photo files into
the folder. When the USB memory device is
connected to this Player, the screen saver will
activate according to the Screen Saver settings
(p. 41).
– To use this function, this Player must be connected
to the Internet. Access to some contents may require
a high speed internet connection.
– The third party content services may be changed,
suspended, interrupted, or discontinued at any time
without notice and Yamaha disclaims any liability in
connection with such occurrences.
– Some content may only be available for specific
countries and may be presented in specific
languages.
1 Press HOME.
The HOME menu screen is displayed.
Remote control buttons used for
photo playback
Remote control buttons
Function
Stops playback.
Pauses playback.
Control
buttons
Cursor
buttons
Starts playback.
/
Changes the speed of slide show
playback.
/
Skips to the previous photo or
next photo.
5/a
Inverts the photo up-down or
left-right.
2/3
Rotates the photo 90 degrees to
the left or right.
ZOOM
Zoom in/out the photo. When
the photo size is larger than the
screen, use the cursor buttons to
move the viewing area.
STATUS
Displays the playback
information (p. 31).
Hint
– To directly move to the VUDU menu screen, press
VUDU.
2 Use the cursor buttons (5/a) to select “VUDU”, and
press ENTER.
3 Use the cursor buttons to select the desired item and
press ENTER to confirm the selection (or start
playback).
Hints
– To return to previous screen, press RETURN or
cursor key (2), or select
in the menu screen.
– To exit from each network service, press HOME.
24 En
Playing back video/music/photo
About VUDU™
VUDU is an online streaming movie service that allows
you to rent or purchase individual movies or TV shows in
either standard definition or high definition without a
subscription,
More information at www.vudu.com
Note
3
Playback
– To deactivate the VUDU service, refer to “VUDU”
(p. 38).
25 En
Enjoying high-quality sound
The CD mode and Pure Direct mode allow you to enjoy better quality sounds.
The CD mode allows you to play back music CDs or SA-CDs with accurate and high quality sound.
The Pure Direct mode allows you to enjoy pure high fidelity sound on any sources.
■ Enjoying music CD/SA-CD in
high-quality sound (CD mode)
CD
If the CD mode is enabled when you play back a music
CD or an SA-CD, this player operates in the following
conditions and allows you to enjoy more enhanced quality
sounds.
• Disables the electrical distribution to the circuitries for
unused functions to reduce electrical noises from those
circuitries.
• Limits HDMI video signal outputs to reduce electrical
noises from the HDMI circuitry.
• Slows the disc rotation speed to reduce the negative
effect of the electric current driving the motor to
improve the sound quality (when playing back a music
CD).
1 Press CD MODE.
Each time you press the button, the CD mode is
enabled or disabled.
Notes
– During the CD mode, the auto-playback function
does not work.
– The CD mode works on music CDs (CDDA) and
SA-CDs only. If this Player is set to the CD mode
during playback of other disc (such as a Blu-ray
disc), playback stops and the disc will be
automatically ejected.
– You cannot switch this player to the CD mode
during playback of other media (USB, DLNA or
network service). To switch to the CD mode, first
stop the ongoing playback.
Hints
– You can also enables/disables the CD mode with the
CD MODE switch on the front panel. When the CD
mode is enabled, the CD MODE indicator on the
front panel lights up.
– When connecting the AV receiver to the HDMI jack
of this Player, set HDMI (CD Mode) (p. 42) in the
SETUP menu to Audio Only (default). This setting
disables HDMI video output during the CD mode in
order to reduce the electrical noise from the
circuitry.
– When connecting the AV receiver to the DIGITAL
OUT, ANALOG OUT or BALANCED OUT jacks
of this Player, set HDMI (CD Mode) (p. 42) in the
SETUP menu to Off. This setting disables the HDMI
circuitry (HDMI video/audio output) during the CD
mode and allows you to enjoy a better quality sound.
26 En
■ Enjoying music and movies with
pure high fidelity sounds (Pure
Direct)
When the Pure Direct mode is enabled, this Player plays
back the selected source with the least circuitry in order to
reduce the electrical noise from other circuitry (such as the
front display). It allows you to enjoy Hi-Fi sound quality.
1 Press PURE DIRECT.
Each time you press the button, the Pure Direct mode
switches as follows.
Front panel
display
Function
PDIRECT1
Enables the Pure Direct mode (mode 1).
In this mode, the front panel display is
turned off and HDMI video output is
disabled. This mode is suitable for
listening music with high quality sound.
PDIRECT2
Enables the Pure Direct mode (mode 2).
In this mode, the front panel display is
turned off. This mode is suitable for
watching movies with high quality sound.
(no display)
Disables the Pure Direct mode.
Hints
– When the CD mode is enabled, the Pure Direct mode
switches between on and off.
– You can also switch the Pure Direct mode with the
PURE DIRECT button on the front panel. When the
Pure Direct mode is enabled. the PURE DIRECT
button on the front panel lights up.
Enjoying DLNA playback of mobile device contents via Wi-Fi Direct
♪
♪
㽈
This Player
TV
4 Perform the following operation to make a Wi-Fi
Direct connection.
If your device is Wi-Fi Direct compliant:
1 Within 2 minutes, operate your device to make a
connection.
If your device is not Wi-Fi Direct compliant:
1 Press RED to enter the manual connection mode.
The SSID information appears on the screen.
2 On your device, open the Wi-Fi setup screen and
enter the SSID information.
5 Press ENTER (or wait for 3 seconds) and use the
DLNA-compatible player application to start playback
on your mobile device.
Mobile device
Notes
– To check if your device is Wi-Fi Direct compliant,
refer to the owner’s manual of the device. If your
device is not Wi-Fi Direct compliant, follow the
procedure below to make a manual connection.
– When Wi-Fi Direct is enabled, playback of other
network functions, discs and USB memory devices
are not available.
1 If playback of other source is ongoing, stop the
playback.
2 Press HOME.
The HOME menu screen is displayed.
3 Use the cursor buttons (5/a) to select “Wi-Fi Direct”
and press ENTER.
Hint
– Select this Player as the renderer on the DLNAcompatible player application.
6 To exit from Wi-Fi Direct, press HOME.
Hint
– You can also exit from Wi-Fi Direct by pressing
SETUP or RETURN.
Depending on the environment, audio/video may be
interrupted or noise may appear on the TV screen. In
this case, try the following solutions.
– Move the Wi-Fi Direct device closer to this Player.
– Turn off other wireless devices not in use.
– Move the Wi-Fi Direct device and this Player away
from microwave ovens, or other wireless devices.
27 En
3
Playback
By using the Wi-Fi Direct function, you can connect a
mobile device directly to this Player without using a
wireless router and enjoy DLNA playback of the mobile
device contents on this Player.
Enjoying smartphone pictures and videos
on the TV screen (Miracast™)
By using the Miracast function, you can view the images displayed in the screen of your Miracast-compatible device
(such as smartphone) on the TV screen like mirroring.
Notes
– To check if your device is Miracast compliant, refer to the owner’s manual of the device.
– When Miracast is enabled on this Player, other network functions (such as DLNA) are not available.
– When using Miracast, you cannot operate the disc tray or playback of other sources.
♪
♪
1 If playback of other source is ongoing, stop the
playback.
2 Press MIRACAST.
This Player
TV
3 Within 60 seconds, operate your smartphone to enable
Miracast and select this Player as the device to be
connected.
For details on operations of your smartphone, refer to
the owner’s manual of it.
4 To exit from Miracast, press MIRACAST.
Miracast-compatible
device
(such as smartphone)
Hint
– You can also exit from Miracast by pressing HOME
or RETURN.
Depending on the environment, audio/video may be interrupted or noise may appear on the TV screen. In this case,
try the following solutions.
– Move the Miracast device closer to this Player.
– Turn off other wireless devices not in use.
– Move the Miracast device and this Player away from microwave ovens, or other wireless devices.
28 En
Operating this Player from mobile devices
By using the following applications on your mobile device, you can use the mobile device as a remote control and
operate this Player from it.
AV CONTROLLER
29 En
Playback
3
– You can control the basic functions of this Player such as Play, Pause, Skip, Power and cursor navigations.
– The application “AV CONTROLLER” is available in many languages.
– For more information about “AV CONTROLLER”, visit the Yamaha website.
Advanced playback operation
This chapter explains playback of commercially available
Blu-ray Discs, DVDs, SA-CDs, CDs, and recorded DVDRW/R discs.
Note
– For the basic playback operation, see page 8.
■ On Screen menu
To display On Screen menu, press ON SCREEN. After
that, press 5/a/2/3 to select an item, then press ENTER
to operate the desired function.
DVD
–
–
–
–
–
–
–
Normal
Shuffle CH (chapter)
Shuffle TT (title)
Shuffle All
Random CH (chapter)
Random TT (title)
Random All
VIDEO
MUSIC
PHOTO
– Normal
– Shuffle F (folder)
– Random F (folder)
Audio BD DVD VIDEO : Shows audio language/
signal of a Blu-ray Disc/DVD currently selected. You can
select the desired type of audio.
Angle BD DVD : Shows the currently-selected angle
number. If the video is recorded with multiple angles, you
can change the angle.
Subtitle BD DVD VIDEO : Shows the currentlyselected subtitle language when the subtitle is provided.
On Screen menu contains following items.
Title BD DVD VIDEO : Shows the title number being
played back. You can skip to the desired title by selecting
it from this item.
Chapter BD DVD VIDEO : Shows the chapter
number being played back. You can skip to the desired
chapter by selecting it from this item.
Track/File CD VIDEO MUSIC PHOTO : Shows
track/file number being played back. You can skip to the
desired track/file by selecting it from this item.
Time BD DVD CD VIDEO MUSIC : Shows the
playback time. Select display type from the following:
– Elapsed playback time of the title, chapter, disc,
track or file
– Remaining playback time of the title, chapter, disc,
track or file
CD
VIDEO
MUSIC
PHOTO : Shows current
playback mode. You can select playback mode from the
following:
CD
– Normal: Normal playback.
– Shuffle: Random playback without repetition.
– Random: Random playback with repetition.
30 En
Bitrate BD DVD CD VIDEO
bitrate of the audio/video signal.
MUSIC : Shows
Second Video BD : Turns the PIP on/off (p. 9).
Second Audio BD : Turns the secondary audio on/off
(p. 9).
Ins Search
BD
DVD
CD
VIDEO
MUSIC : Skips 30 seconds.
CD
VIDEO
MUSIC : Replays the content
Ins Replay
BD
DVD
from 10 seconds before.
CC Select
BD
Mode/Play Mode
DVD
Subtitle Style BD : Shows the currently-selected
subtitle style. This function is available only for Video-file
external subtitle. You can select the desired text style of
subtitle.
DVD
VIDEO : Sets the displayed closed caption.
Slide Show PHOTO :
Shows slide show speed. You can select the slide show
speed from Slow/Medium/Fast.
Transition PHOTO : Shows how photo appears on the
screen. You can select the transition type.
Advanced playback operation
■ Status menu
This shows various settings, such as subtitles, angle
settings and the title/chapter/track number currently
played back. To display status menu, press STATUS.
Status menu contains following menus.
BD
DVD
DVD
CD
MUSIC
Example: Icons when playing a music file
VIDEO
Example: Icons when playing a Blu-ray Disc
2
3
6 7
1
2
3
4
4
3
5
Playback
1
8
(Playback status)
(Disc type/video file icon)
(Title number being played): You can jump to
specified title with SEARCH button (p. 9).
(Chapter number being played) BD DVD :
You can jump to specified chapter with SEARCH
button (p. 9).
(Track/file number being played) VIDEO :
You can jump to specified track with SEARCH button
(p. 9).
1
2
3
(Playback status)
(Repeat mode): Shows current repeat mode
(p. 10).
(Disc type/music file icon)
4 (Artwork) MUSIC : Displays artwork if the file
contains it.
5
(Track/file number being played): You can
jump to specified track with SEARCH button (p. 9).
5
(Elapsed playback time): You can jump to
specified point with SEARCH button (p. 9).
6
(Repeat mode): Shows current repeat mode
(p. 10).
7
7
(Audio currently selected): You can change the
audio language or format with AUDIO button.
8 (Progress bar) MUSIC : Shows progress status of
current song.
8
(Subtitle currently selected): You can change
the subtitle language with SUBTITLE button.
6 (Information) MUSIC : Displays music information
if the file contains them.
(Elapsed playback time): You can jump to
specified point with SEARCH button (p. 9).
PHOTO
1
2
3
4
1
(Playback status)
2
(Photo file icon)
3
(File number being displayed)
4
5
(Repeat mode): Shows current repeat mode
(p. 10).
5 (Slide show speed)
31 En
Advanced playback operation
■ Program play
DVD
■ Using Search
CD
This allows you to program playback order of audio disc
tracks or DVD chapters.
Press PROGRAM during playback to display the
PROGRAM window to program playback order.
You can program up to 15 tracks/chapters.
BD
DVD
CD
VIDEO
MUSIC
PHOTO
This allows you to jump to the specified point during
playback.
1 Press SEARCH during playback. Status bar appears.
2 Press 5/a/2/3 to select one of the item below, then
press ENTER.
Note
– Program play is not available during the CD mode
(p. 26).
BD
DVD :
Example: Programming the playback order of CD tracks
– Title number (shown as
)
– Chapter number (shown as
1 Press PROGRAM during playback.
– Elapsed title time (shown as
)
)
– Elapsed chapter time (shown as
CD :
– Track number (shown as
)
)
– Elapsed track time (shown as
)
– Elapsed disc time (shown as
VIDEO MUSIC :
2 Press ENTER to program playback order.
For audio disc, press 5/a to select a desired track then
press ENTER.
For DVD-Video disc, select a desired title (shown as
TT) and chapter (shown as CH) instead of a track.
To clear a set track, select the track you want to clear,
then press CLEAR.
Press RETURN to cancel the Program play.
)
– File number (shown as
)
– Chapter number (shown as
)
– Elapsed file time (shown as
)
PHOTO :
– File number (shown as
)
3 Press 5/a or number buttons to set/adjust the value of
the focused item, and press ENTER to jump to the
specified point.
4 To close the status bar, press STATUS.
■ Enjoying BONUSVIEW™ and BDLive™
This Player supports BONUSVIEW (p. 51) (BD-ROM
Profile 1 Version 1.1) and BD-Live (p. 51) (BD-ROM
Profile 2) playback functions.
Note
– Functions and playback method vary depending on
the disc. See the guidance on the disc or the supplied
user’s manual.
3 After programming is finished, press
start program playback.
to set and
4 To cancel program play, stop playback completely by
pressing
.
32 En
Advanced playback operation
■ Using Picture in Picture function
(secondary audio/video playback)
BD-Video that includes secondary audio and video
compatible with Picture in Picture can be played back
with secondary audio and video simultaneously as a small
video in the corner.
Primary video
Secondary video
Notes
– Yamaha cannot guarantee that all brands’ USB
memory devices will operate with this Player.
– Do not use a USB extension cable when connecting
a USB memory device to the USB connector of the
Player. Using a USB extension cable may prevent
the Player from performing correctly.
4. Run BD-Live according to the
instructions on the disc.
Notes
While PIP Mark (
) or Secondary
Audio Mark (
) is displayed, press
PIP to turn the Picture in Picture
function on/off.
Notes
– To listen to secondary audio, make sure that the
Audio Output setting (Coaxial / Optical or HDMI) is
set to PCM or Reencode (p. 42).
– Depending on the disc, to listen to secondary audio,
you may need to set secondary audio to on from the
top menu of the disc (p. 8).
– The secondary audio and video for Picture in Picture
may automatically play back and be removed
depending on the content. Also, playable areas may
be restricted.
■ Using the feature of BD-Live™
1. Set the Network setting (p. 39).
2. Connect the USB memory device
to this Player (p. 19).
–
–
–
–
–
3
Playback
3. Play back the disc.
– Do not remove the USB memory device or disconnect
unplug the power cable during BD-Live operations.
– Regarding playback method of BD-Live contents,
etc., perform the operations in accordance with the
instructions in the Blu-ray Disc manual.
– To enjoy BD-Live functions, perform the network
connection (p. 16) and Network settings (p. 39).
– Refer to “BD-Live Connection” (p. 39) regarding the
setup to restrict access to BD-Live contents.
– The time required to download the provided programs
into the USB memory device connected to this Player
varies depending on the internet connection speeds
and the data volume of the programs.
– BD-Live programs provided through the internet
may not be able to display the connection depending
on the status (upgrading) of the provider. In such
cases, take out the disc and try again.
– If the BD-Live screen does not appear for a while
after you select the BD-Live function in the Blu-ray
Disc menu, the USB memory device may not have
enough free space. In such cases, eject the disc from
the Player, and then erase the data in the USB
memory device using the “Format” menu in the
“Local Storage” (p. 37).
BD-Live data is saved in a USB memory device
connected to this Player. To enjoy these functions,
connect a USB memory device supporting USB 2.0
High Speed (480 Mbit/s) to one of the USB
connectors (front/rear) of this Player to use the USB
memory device as Local Storage.
Local Storage is used as an auxiliary memory when
Blu-ray Disc is played back.
Use a USB memory device with at least 2GB of free
space.
BUDA folder is created automatically in the USB
memory device when necessary.
If there is insufficient storage space, the data will not
be copied/downloaded. Delete unneeded data or use
a new USB memory device.
Some time may be required for the data to load
(read/write).
33 En
SETTINGS
SETUP menu
The SETUP menu enables various audio/visual settings and adjustments for functions using the remote control unit.
Menu/Submenu
System
Item
Playback
Security
Network
34 En
Page
Auto Power
Standby
Sets the power-saving function to on/off.
HDMI Control
Sets this Player to receive control signal from the remote
control of your TV/AV receiver.
37
Load Default
Resets all settings to the default setting except Security
setting.
37
Upgrade
Performs upgrade of this Player.
37
Upgrade
Notification
Selects whether to display the message on the screen when
this Player detects newer software over the Internet.
37
3D Playback
Message
Displays a warning message concerning 3D video playback
when this Player is turned on.
37
Local Storage
Displays the free space of USB memory device connected to
this Player, or formats the “BUDA” folder in the USB
memory device.
37
General Setting
Language
Function
37
Easy Setup
Sets language, resolution, screen aspect ratio.
37
Software License
Displays the software license information.
37
OSD
Selects the language for On Screen Display.
38
Menu
Prioritizes the language for disc menu.
38
Audio
Prioritizes the language for audio.
38
Subtitle
Prioritizes the language for subtitle.
38
Disc Auto Playback
Sets this Player to start disc playback automatically.
38
Angle Mark
Sets to display the Angle Mark when Blu-ray Disc/DVD with
multiple angles is played back.
38
PIP Mark
Sets to display the PIP Mark when Blu-ray Disc/DVD with
Picture in Picture is played back.
38
Secondary Audio
Mark
Sets to display the Secondary Audio Mark when Blu-ray
Disc/DVD with secondary audio is played back.
38
Last Memory
Sets this Player to remember the last playback position of a
disc (Blu-ray or DVD video) when it is set to standby mode
or the disc tray is opened.
38
VUDU
Deactivates this Player from VUDU service.
38
Change Password
Changes password for Parental Control and Country Code.
38
Parental Control
Sets the Parental Control depending on the disc content.
38
Country Code
Sets your Country Code.
38
Connection setting
Sets a network connection method.
39
Information
Displays network information screen.
39
Connection Test
Performs the network connection test.
39
IP Setting
Sets the IP setting to Auto/Manual.
39
Proxy Setting
Sets the proxy setting.
39
Network Control
Selects whether this Player can be controlled from AV
CONTROLLER.
39
Network Standby
Selects whether this Player can be turned on from other
network devices.
39
DMC Control
Selects whether to allow DLNA-compatible Digital Media
Controller (DMC) (p. 17) to control this Player.
39
BD-Live
Connection
Sets the BD-Live connection to Permitted/Partial Permitted/
Prohibited.
39
SETUP menu
TV
Display Setting
Video Process
Screen Saver
Item
Function
Page
3D Output
Selects 3D or 2D videos.
40
TV Screen
Sets the screen aspect ratio of the connected TV, and adjust
the video output.
40
4K Upscaling
Enables/disables 4K upscaling for HDMI video output.
40
HDMI Resolution
Selects the HDMI video output resolution.
40
TV System
Selects the TV System from NTSC/PAL/Multi.
40
Color Space
Selects Color Space from YCbCr 4:4:4/YCbCr 4:2:2/Full
RGB/RGB.
40
HDMI Deep Color
Selects HDMI Deep Color from 30 bits/36 bits/Off.
40
HDMI 1080p 24Hz
Sets HDMI 1080p 24Hz to Auto/Off.
41
Noise Reduction
Sets the level of Noise Reduction.
41
De-interlacing
Mode
Sets how to detect the video signal.
Time
Sets the time to activate the screen saver (slide show).
41
SlideShow order
Enables/disables the shuffle function for the screen saver
(slide show).
41
41
Transition
Selects the transition type for the screen saver (slide show).
41
CC Attribute
Sets the appearance of closed captions.
41
Font color
Font size
Font style
Font opacity
Font edge
Font edge color
BG color
BG opacity
Window color
Window opacity
Customize the font, background and window used for closed
captions when CC Attribute is set to Custom.
CD Mode
HDMI
Selects whether to restrict HDMI output during the CD
mode.
42
Audio Output
Coaxial / Optical
Selects the output mode of COAXIAL jack/OPTICAL
terminal from Bitstream/PCM/Reencode/Off.
42
HDMI
Selects the output mode of HDMI terminal from Bitstream/
PCM/Reencode/Off.
42
Downsampling
Selects the digital audio signal down sampling frequency
from 48K/96K/192K.
42
DRC
Sets the DRC (Dynamic Range Control).
42
Output Priority
Selects the output jacks to be used for playing back SA-CDs.
42
Output Method
Selects the audio signal output from the HDMI jack when an
SA-CD or a DSD file is played back.
42
SACD Area
Selects whether to play back 2-channel or multi-channel
content when the SA-CD contains the both types of contents.
42
Speaker Setting
2ch Downmix
Sets the audio output from the ANALOG OUT and
BALANCED OUT jacks.
42
Post Process
UpMix
Multi-channelizes the 2-channel audio signal.
43
Closed Caption
Audio Setting
SACD/DSD File
Output
41
Displays software version and MAC address (p. 52).
43
System
Information
35 En
4
Settings
Menu/Submenu
SETUP menu
■ Example of SETUP menu
operation
You need to call up the SETUP menu screen to perform
settings for this Player. The following is the explanation
for basic operations of the SETUP menu.
3. Select a menu item.
Press 5/a to select Disc Auto Playback, then press
ENTER or cursor 3.
SUBTITTLE
AUDIO
ANGLE
ZOOM
CLEAR
SEARCH
PURE
DIRECT
MIRACAST
SETUP
CD
MODE
HOME
TOP MENU
POP-UP MENU
4. Select a desired setting.
Press 5/a to select On or Off, then press ENTER.
ENTER
RETURN
SETUP
ON SCREEN
STATUS
O
G
Example: Setting Disc Auto Playback
Note
– Some items cannot be set during playback. In this
case, press
to stop playback completely before
setting.
1. Display the SETUP menu screen.
Press SETUP to display the SETUP menu screen.
Press 2/3 to select General Setting, then press
ENTER or a.
2. Select a Submenu.
Press 5/a to select Playback, then press ENTER or
cursor 3.
36 En
Hint
– You need to use the number buttons to enter
numbers (such as password) for some menu items.
5. Exit the menu screen.
Press 2 to return to the previous menu.
SETUP menu
Load Default
You can reset all settings of this Player to default setting
except Security setting (p. 38). For details on default
settings, see pages 34-43.
System
Upgrade
You can upgrade the software manually from USB
Storage or Network. For details on software upgrade, refer
to “Software upgrade” (p. 46).
Auto Power Standby
Sets the power-saving function to on/off.
When set to on, this Player will turn to standby mode after
20 minutes from the last operation without any playback.
Upgrade Notification
You can select whether to display the message on the
screen when this Player detects newer software over the
Internet.
The default settings are marked with “ * ”.
Hint
On*, Off
– Before this Player turns to standby mode, the screen
saver (p. 41) will activate.
3D Playback Message
You can turn on or off a warning message concerning 3D
video playback that appears on the TV when this Player is
turned on.
On*, Off
HDMI Control
You can set the Player to receive control signal from a
TV/AV receiver compatible with the HDMI Control
function via an HDMI cable (p. 12).
On, Off*
Using HDMI Control function
Using the HDMI Control function, you can interactively
operate this Player with your TV (HDMI Control
function supported).
When you connect this Player to the TV compatible with
the HDMI Control function using an HDMI cable and
set HDMI Control in the SETUP menu to on (p. 37), you
can perform the function listed below.
• Automatic input select function
When you start playback of this Player, the input
selector of the TV (and an AV receiver if this Player is
connected to the TV via the AV receiver) is switched
to this Player automatically. TV Power is turned on
automatically depending on the TV.
• Automatic power off function
When you turn off the TV while this Player is in stop
mode and the SETUP menu screen is not displayed, the
power of this Player is also turned off automatically.
On*, Off
Local Storage
You can check the free space of USB memory device
connected to this Player, or format (empty) the “BUDA”
folder in the USB memory device connected to this Player
by selecting Format.
Hint
– To enjoy the BD-Live feature (p. 33), you need to
connect a USB memory device (with at least 2GB of
free space) to one of the USB connectors (front/rear)
of this Player to use the USB memory device as
Local Storage.
Easy Setup
You can perform Easy Setup (p. 21).
Software License
You can view the information about third party software
license.
By using this product, you will be deemed to have
accepted the terms and conditions.
Notes
– HDMI Control function may not work properly
depending on the TV.
– Functions other than ones shown above may work
depending on the TV or AV receiver.
– In order to make the HDMI Control function
available, set up settings for the HDMI Control
function on ALL components (this Player, TV,
and AV receiver). Certain operation may also be
required.
– Each function may be set independently to
activate/deactivate depending on the TV.
– Refer to the operation manuals supplied with the
TV and/or AV receiver for details regarding setup.
– When set to on, power consumption during
standby mode increases due to HDMI Control
function.
37 En
4
Settings
■ General Setting
SETUP menu
Language
OSD
You can select the language for On Screen Display which
is the messages or menu displayed on the screen such as
SETUP menu.
English, Français, Español, Deutsch, Italiano, Svenska,
Nederlandse, Polski, Русский, 中文
Menu
You can prioritize the language for disc menu.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portuguese, Danish, Svenska, Finnish,
Norwegian, Polski, Русский, Korean, Japanese, More
Audio
You can prioritize the audio language for Blu-ray Disc/
DVD playback. For details on setting items, see “Menu”
(p. 38).
Subtitle
You can prioritize the language for Subtitle.
English, Français, 中文 , Español, Deutsch, Italiano,
Nederlandse, Portuguese, Danish, Svenska, Finnish,
Norwegian, Polski, Русский, Korean, Japanese, More, Off
(The default settings in [Language] differ depending on
your model.)
Playback
Disc Auto Playback
You can set Disc Auto Playback to on/off. When set to on,
a disc will play back automatically after loading.
On*, Off
Angle Mark
You can set to display the Angle Mark (
) when
Blu-ray Disc/DVD with multiple angles is played back.
On*, Off
PIP Mark
You can set to display the PIP Mark (
) when Blu-ray
Disc with picture in picture (p. 33) is played back.
On*, Off
Secondary Audio Mark
You can set to display the Secondary Audio Mark (
)
when Blu-ray Disc with secondary audio is played back.
On*, Off
Last Memory
You can set whether this Player remembers the last
playback position of a disc (Blu-ray or DVD video) when
it is set to standby mode or the disc tray is opened.
On*, Off
Note
– Some discs are not compatible with this function.
38 En
VUDU
You can deactivate this Player from VUDU service
(p. 24).
Security
Change Password
You can set the password for changing the Parental
Control Level and Country Code. Refer to “Parental
Control” (p. 38) and “Country Code” (p. 38).
Notes
– The default password is 0000.
– If you forget the password, refer to
“Troubleshooting” (p. 47) and set all the Security
settings to their default settings.
Parental Control
In some Blu-ray Discs/DVDs, a control level for disc
viewing is set depending on the age of the viewer. You
can set the Parental Control shown on the screen
depending on the disc content.
The password (see “Change Password” on p. 38) needs to
be entered before the Parental Control Levels is set.
After you set the Parental Control, when you play back a
disc with level higher than current Parental Control Level,
or you want to change the Parental Control Level, a dialog
box will pop up to ask you to enter the password.
Off*, 1–8
Country Code
You can set the Country Code you live in. The password
(see “Change Password” on p. 38) needs to be entered
before the Country Code is set. This setting may be used
for rating of Parental Control and disc playback.
SETUP menu
Connection setting
You can select a network connection method.
Wired*
Connects the network using Ethernet.
Wireless
Connects the network using a wireless LAN.
You can select settings for a wireless LAN
connection. Follow the on-screen instructions to
proceed.
Scan
Searches for an access point. You can connect the
access point that is found.
Manual
You can manually set information for an access
point.
Auto
If your access point supports the WPS (Wi-Fi
Protected Setup) function, you can use the auto setup
method to connect this Player to the access point
without entering information manually. Select PBC
(Push Button Configuration) or PIN code method.
Information
You can display network information screen. On this
screen, you can view the information of Interface
(Ethernet), Address Type, IP Address, Subnet Mask,
Default Gateway, and DNS.
Proxy Setting
You can set Proxy Setting. Set to Disable for normal use.
Set to Enable to set the proxy setting.
Disable*
Sets proxy server to disable. Select this item when
proxy server is not used.
Enable
Enables proxy host and proxy port setting.
Proxy Host
Sets proxy host.
Proxy Port
Sets proxy port.
Network Control
Selects whether this Player can be controlled from AV
CONTROLLER. When On with filter is selected, you can
specify the MAC addresses of the mobile devices (such as
smartphones and tablet) that will be permitted access to
this Player.
On*, On with filter, Off
Network Standby
You can select whether this Player can be turned on from
other network devices such as “AV CONTROLLER”
(p. 29).
On, Off*
Note
– This setting is available only when Network Control
is enabled.
Connection Test
You can perform an internet connection test. If the test is
failed, please check “IP Setting” (p. 39) and perform the
test again.
DMC Control
You can select whether to allow DLNA-compatible
Digital Media Controller (DMC) (p. 17) to control this
Player.
IP Setting
You can configure the network settings.
Enable*, Disable
Auto*
Select to automatically configure the network
settings of this Player with the DHCP server.
Manual
Select to configure the network settings (IP Address,
Subnet Mask, Default Gateway, and DNS) manually.
Hints
–
–
–
–
Numeric keys
2/3
CLEAR
ENTER
BD-Live Connection
You can set access restriction to BD-Live contents.
Permitted
Allows all BD-Live discs to connect the network.
Partial
Permitted*
Allows only discs with owner certification.
Prohibited
Prohibits all BD-Live discs to connect the network.
Enters characters.
Moves the highlight.
Deletes a character.
Saves the settings and exits from
the menu.
39 En
4
Settings
Network
SETUP menu
■ Display Setting
The default settings are marked with “ * ”.
TV
3D Output
You can select 3D or 2D video output from this Player.
Auto*
This Player automatically selects 3D or 2D videos.
Off
This Player always selects 2D videos.
Note
– Even if you set “3D Output” to “Auto” and play
back a Blu-ray 3D Disc, this Player selects 2D
images depending on the setting of TV, etc.
TV Screen
You can set the screen aspect ratio of the connected TV,
and adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected TV
changes, you will have to change the TV Screen setting.
16:9 Full
16:9
Normal*
Select this when this Player is connected to a TV
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
Select this when this Player is connected to a TV
with a 16:9 screen. When a 4:3 aspect ratio video is
played back, the video is displayed as shown below.
4:3 Pan Scan Select this when this Player is connected to a TV
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
4:3 Letter Box Select this when this Player is connected to a TV
with a 4:3 screen. When a 16:9 aspect ratio video is
played back, the video is displayed as shown below.
Original
image size
On 16:9 (wide screen) TV
16:9 Full
16:9 Normal
4:3
Original
image size
On 4:3 TV
4:3 Pan Scan
4:3 Letter Box
HDMI Resolution
You can select the HDMI video output resolution. For
more details on output formats, refer to “Video output
formats” (p. 44).
When set to Auto, resolution is set to the maximum
resolution according to the connected TV.
When set to Disc Native, the original resolution and video
frequency, recorded in the Blu-ray Disc or DVD that is
played back, are used. You can use a video up-converter
function of an external device.
When other than a Blu-ray Disc or DVD is played back,
the resolution and video frequency will work as Auto.
If a Blu-ray Disc or DVD whose resolution and video
frequency are not compatible with the connected TV, no
image will be output. In this case, stop playback, and
select an option other than Disc Native.
Auto*, Disc Native, 4K, 480i/576i, 480p/576p, 720p, 1080i,
1080p
Notes
– To output HD audio (Dolby TrueHD or DTS-HD
Master Audio) from HDMI terminal, set HDMI
Resolution to Auto or more than 720p.
– 4K is available only when 4K Upscaling is set to On.
– Auto is automatically selected when 4K Upscaling is
set to Off while HDMI Resolution is set to 4K.
TV System
You can select TV System from PAL, NTSC and Multi.
Set the same TV System as your TV set. For more details
on output formats, refer to “Video output formats” (p. 44).
NTSC, PAL, Multi
(The default setting differs depending on your model.)
Color Space
You can select the Color Space (p. 51) output from
HDMI. This function is available when this Player is
connected with an HDMI cable.
YCbCr 4:4:4* Sets Color Space to YCbCr 4:4:4.
YCbCr 4:2:2
Sets Color Space to YCbCr 4:2:2.
Full RGB
When RGB is set and white and black on the screen
are too faint, select this item. This setting is effective
when a connected component supports RGB 0–255
range.
RGB
Outputs video signal at normal signal range.
Note
– This function is only available on TVs that support
this function.
16:9
4K Upscaling
Enables/disables 4K upscaling for HDMI video output.
When set to on, you can set “HDMI Resolution” to “4K”.
On*, Off
40 En
HDMI Deep Color
When your TV and/or AV receiver is compatible with
Deep Color (p. 51), set this item according to your TV/AV
receiver. This function is available when this Player is
connected with an HDMI cable.
30 bits, 36 bits, Off*
SETUP menu
HDMI 1080p 24Hz
This outputs the BD-Video encoded in 24Hz frame rate in
HDMI 1080p 24Hz. Smoother video playback may be
available with this function. This function is available
when your TV/AV receiver support this function. For
more details on output formats, refer to “Video output
formats” (p. 44).
Transition
You can select the transition type for the screen saver
(slide show).
Auto*, Off
Closed Caption
– This setting is disabled when output resolution is
other than 1080p.
CC Attribute
You can set the appearance of closed captions. When Auto
is selected, digital closed captions will be displayed in
default settings. When Custom is selected, you can
customize the appearance of closed captions (Font color,
Font size, etc.) manually.
Video Process
Auto, Custom
Noise Reduction
You can set the Noise Reduction to a level of 0 to 3. 0 is
off, and 3 is the maximum level.
Font color, Font size, Font style,
Font opacity, Font edge, Font edge color,
BG color, BG opacity, Window color,
Window opacity
Customize the font, background and window used for
closed captions when CC Attribute is set to Custom.
0, 1, 2*, 3
De-interlacing Mode
You can select how to detect the video signal. Set to Auto
for normal use. When horizontal stripping noise appears
on the screen, set this to Film/Video to remove the noise.
Auto*, Film, Video
Screen Saver
You can display the screen saver when you do not operate
this Player for the specified time. You can select the builtin images or photo slide show.
Hints
– To use the slide show as the screen saver, create the
“autopict” folder under the root directory of the USB
memory device, put at 3 or more photo files (JPEG,
GIF and PNG format files) into the folder, and
connect the USB memory device to this Player.
– “SlideShow order” and “Transition” works when the
slide show is used as the screen saver. These settings
are synchronized with the photo slide show settings
in the On Screen menu (p. 30).
Time
You can set the amount of time (minutes) to activate the
screen saver. If you do not operate this Player for the
specified time, the unit will automatically activate the
screen saver.
1, 5*, 10
SlideShow order
You can enable/disable the shuffle function for the screen
saver (slide show).
Normal*
The photos are displayed in normal order.
Shuffle
The photos are displayed in random order.
41 En
4
Settings
Note
None*, Wipe left, Wipe right, Wipe up, Wipe down, Box in,
Box out, Blending, Dissolve, Interlace H, Interlace V, Split
in H, Split in V, Split out H, Split out V
SETUP menu
■ Audio Setting
The default settings are marked with “ * ”.
CD Mode
HDMI
You can select whether to restrict HDMI output during the
CD mode (p. 26).
Off
Disables all the HDMI circuitries during the CD mode.
Audio Only* Disables HDMI video output (the black screen is
displayed) and outputs audio only from the HDMI jack
during the CD mode.
DRC
You can set the DRC (Dynamic Range Control)
(p. 51) to On/Off/Auto. When set to Auto, DRC is
automatically turned on for a source with DRC
information in Dolby TrueHD format. DRC makes the
strong sound such as plosive sound lower, and
conversations more audible. It is useful when you watch
movies in the night.
Off, On, Auto*
SACD/DSD File Output
Output Priority
You can select the output jacks to be used for playing back
SA-CDs.
HDMI*
SA-CD audio is output from the HDMI jack.
Analog
SA-CD audio is output from the analog (ANALOG
OUT and BALANCED OUT) jacks. (DSD stereo is
automatically selected and the converted analog
signals are output.)
Audio Output
Coaxial / Optical
You can select the output mode of COAXIAL jack and
OPTICAL terminal. For more details on output formats,
refer to “Audio output formats” (p. 45).
Bitstream
Outputs digital signal without any processing.
Secondary Audio is not output.
PCM
Outputs 2-channel PCM.
Reencode*
Outputs Bitstream with Secondary Audio.
Off
Mutes sound.
HDMI
You can select the output mode of HDMI terminal. For
details on setting items, see “Coaxial / Optical” (p. 42). For
more details on output formats, refer to “Audio output
formats” (p. 45).
Bitstream*, PCM, Reencode, Off
Output Method
You can select the audio signal output from the HDMI
jack when an SA-CD or a DSD file is played back.
DSD*
DSD signals are output from the HDMI jack.
PCM
PCM signals (decoded by this Player) are output
from the HDMI jack.
Note
– When Output Priority is set to Analog, DSD signals
are output from the HDMI jack.
SACD Area
You can select whether to play back 2-channel (stereo) or
multi-channel content when the SA-CD contains the both
types of contents.
Multi*, Stereo
Note
– To output HD audio (Dolby TrueHD or DTS-HD
Master Audio) from HDMI terminal, set HDMI
Resolution to Auto or more than 720p (p. 40).
Downsampling
You can select digital audio signal down-sample
frequency. This function is effective for the audio signal
output from the COAXIAL jack/OPTICAL terminal.
48K*
The highest sampling rate of digital PCM output is
48 kHz.
96K
The highest sampling rate of digital PCM output is
96 kHz.
192K
The highest sampling rate of digital PCM output is
192 kHz.
42 En
Note
– When Output Priority is set to Analog, the stereo
area of an SA-CD is always selected.
Speaker Setting
2ch Downmix
You can select down mix method to analog 2-ch from
Stereo or Lt/Rt.
Stereo*
Changes channel output to stereo, which only
delivers sound from the two front speakers.
Lt/Rt
Select this item if this unit is connected to a Dolby
Pro Logic decoder. Sound from rear speakers is
mixed to the 2-ch stereo sound.
SETUP menu
Post Process
UpMix
You can multi-channelize the 2-channel audio signal. To
multi-channelize, select DTS NEO:6, then select Cinema
or Music mode.
■ System Information
Software version and MAC address (p. 52) are displayed.
Off*, DTS NEO:6
Settings
4
43 En
Video/audio output formats
■ Video output formats
When TV System is set to NTSC
Contents
HDMI Resolution (p. 40)
Auto
Disc Native
4K (*3)
1080p
1080i
720p
480p/576p
480i/576i
BD-Video
with 1080p/24Hz
content
*1
1080p 24Hz
4K (2160p)
24 Hz
1080p 24Hz/
60Hz *4
1080i 60Hz
720p 60Hz
480p
480i
BD-Video
without 1080p/
24Hz content
*1
*2
4K (2160p)
30 Hz
1080p 60Hz
1080i 60Hz
720p 60Hz
480p
480i
DVD-Video
*1
*2
4K (2160p)
30 Hz
1080p 60Hz
1080i 60Hz
720p 60Hz
480p
480i
Others
*1
*1
4K (2160p)
30 Hz
1080p 60Hz
1080i 60Hz
720p 60Hz
480p
480i
When TV System is set to PAL
Contents
HDMI Resolution (p. 40)
Auto
Disc Native
4K (*3)
1080p
1080i
720p
480p/576p
480i/576i
BD-Video
with 1080p/24Hz
content
*1
1080p 24Hz
4K (2160p)
24 Hz
1080p 24Hz/
50Hz *4
1080i 50Hz
720p 50Hz
576p
576i
BD-Video
without 1080p/
24Hz content
*1
*2
4K (2160p)
25 Hz
1080p 50Hz
1080i 50Hz
720p 50Hz
576p
576i
DVD-Video
*1
*2
4K (2160p)
25 Hz
1080p 50Hz
1080i 50Hz
720p 50Hz
576p
576i
Others
*1
*1
4K (2160p)
25 Hz
1080p 50Hz
1080i 50Hz
720p 50Hz
576p
576i
*1 The maximum resolution supported by the TV connected to this Player
*2 The resolution and frequency of the source disc
*3 Available only when 4K Upscaling (p. 40) is set to On
*4 1080 p 24 Hz (when the TV supports 1080p 24 Hz and HDMI 1080p 24Hz (p. 41) is set to Auto) or 1080p 50/60Hz
When TV System is set to Multi
When TV System is set to Multi, video signals are output with the video system (NTSC/PAL) of the source. Refer to the
tables above for details on the resolution/frequency for each video system.
Notes
– To watch videos with each resolution, it must be supported by the TV.
– Regardless of the frequency of content, video signals are output with 60 Hz when TV System (p. 40) is set to
NTSC and output with 50 Hz when set to PAL.
44 En
Video/audio output formats
■ Audio output formats
PCM 2ch
DIGITAL OUT
(COAXIAL / OPTICAL) jacks
Bitstream
(*1)
PCM
(*1)
Reencode
(*1)
Bitstream
(*1)
PCM
(*1)
Reencode
(*1)
Analog
(ANALOG OUT/
BALANCED OUT)
jacks
PCM 2ch
PCM 2ch
PCM 2ch *2
PCM 2ch
PCM 2ch
PCM 2ch *2
2ch
PCM 2ch
PCM 2ch
PCM 2ch *2
2ch
HDMI jack
PCM 5.1ch
PCM 5.1ch
PCM 5.1ch
PCM 5.1ch *2
PCM 7.1ch
PCM 7.1ch
PCM 7.1ch
PCM 7.1ch *2
PCM 2ch
PCM 2ch
PCM 2ch *2
2ch
Dolby Digital
Dolby Digital
PCM up to
5.1ch
Dolby Digital
Dolby Digital
PCM 2ch
Dolby Digital
2ch
Dolby Digital
Plus
Dolby Digital
Plus
PCM up to
7.1ch
Dolby Digital
Plus *2
Dolby Digital
PCM 2ch
Dolby Digital
2ch
Dolby TrueHD
Dolby TrueHD
PCM up to
7.1ch
Dolby TrueHD
Dolby Digital
PCM 2ch
Dolby Digital
2ch
DTS
PCM up to
5.1ch *3
DTS *4
DTS
PCM 2ch *3
DTS *4
2ch *3
DTS-HD
DTS-HD
High Resolution High Resolution
Audio
Audio
PCM up to
7.1ch *3
DTS-HD
High Resolution
Audio *5
DTS
PCM 2ch *3
DTS *4
2ch *3
DTS-HD
Master Audio
PCM up to
7.1ch *3
DTS-HD
Master Audio *5
DTS
PCM 2ch *3
DTS *4
2ch *3
DTS
DTS-HD
Master Audio
*2
4
*1 Up to the Audio Output settings (p. 42)
*2 Output with Dolby Digital when secondary audio, button click sounds or effect sounds are included
*3 Does not output audio when USB memory device, DLNA or network service content is played back
*4 Does not reencode when USB memory device, DLNA or network service content is played back (output audio will be
same format as Bitstream)
*5 Output with DTS when secondary audio, button click sounds or effect sounds are included. However, the source will
not be reencoded when USB memory device, DLNA or network service content is played back (output audio will be
same format as Bitstream)
Audio output format for SA-CDs/DSD files
SACD/DSD File Output settings (p. 42)
Output
Priority
Output
Method
HDMI jack
DIGITAL OUT
(COAXIAL / OPTICAL)
jacks
Analog
(ANALOG OUT/
BALANCED OUT)
jacks
Multi
DSD up to 5.1ch
No output
2ch (DSD signal is
converted)
Stereo
DSD 2ch
No output
2ch (DSD signal is
converted)
Multi
PCM up to 5.1 ch
No output
2ch (PCM signal is
converted)
Stereo
PCM 2 ch
No output
2ch (PCM signal is
converted)
Stereo
No output
No output
2ch (DSD signal is
converted)
SACD Area
DSD
HDMI
PCM
Analog *6
DSD
*6 When Output Priority is set to Analog, DSD signals are output from the HDMI jack and the stereo area of an SA-CD
is always selected
45 En
Settings
Source
format
Software upgrade
New software that provides additional features or product improvements will be released as needed. We recommend
upgrading the software of this Player to the latest version periodically.
To check for the availability of a software upgrade, visit
http://download.yamaha.com/
Note
– Do not remove the USB memory device, set this Player to standby mode or unplug the power cable/network cable
while the software upgrade is being performed.
■ Upgrading the software
1. Prepare for the software upgrade.
When you upgrade the software from USB Storage:
1 Save the upgrade file package to the appropriate
folder on the USB memory device. For more
details, refer to the procedure document attached
with the upgrade file package.
2 Connect the USB memory device.
When you upgrade the software from Network:
Confirm that this Player is connected to the
network.
2. Select the upgrade method and
start upgrade from SETUP menu.
1 Press SETUP to display SETUP menu screen.
2 Select General Setting = System = Upgrade.
3 Select the item which contains the upgrade file
package from USB Storage/Network.
The system will search for upgrade file package.
46 En
3. Upgrade the software by following
the on-screen messages.
Upgrade is completed. The system will be reset.
ADDITIONAL INFORMATION
Troubleshooting
Refer to the table below when this Player does not function properly. If the problem you are experiencing is not listed
below or if the instruction below does not help, turn off this Player, disconnect the power cable, and contact the nearest
authorized Yamaha dealer or service center.
■ Power
Problem
Possible causes and solutions
No power.
– Connect the AC power cable properly.
– Press p on the front panel to turn on the power.
The Player power is turned off.
– This Player will be automatically turned off after 20 minutes of inactivity (no playback)
when Auto Power Standby (p. 37) is set to on.
Problem
Possible causes and solutions
The remote control does not work.
– Use the remote control within its operating range (p. 11).
– Replace the batteries (p. 11).
– Check the ID settings for the main unit and the remote control. The remote control ID
on the main unit may be changed after the main unit is reset. In this case, verify the
remote control ID on the main unit, and set it again if needed (p. 11).
Buttons do not work.
– Turn on the TV connected to this Player and perform the initial settings (p. 21).
– Press and hold p on the front panel for more than 5 seconds to reset this Player.
– To completely reset this Player, unplug the power cable from the AC outlet for 30
seconds or more, plug the power cable to the AC outlet again, and then turn on this
Player.
Password is forgotten.
– Press and hold
,
and
on the front panel simultaneously when no disc is
inserted and playback is stopped to set all the settings including Security settings (p. 38)
of this Player to their default settings. After the power is turned off automatically, press
p to turn on the power again.
■ Disc playback
Problem
Possible causes and solutions
The disc tray does not open or close.
– The disc tray is locked when any network service is selected.
– The disc tray is locked when this Player is in the Miracast receiving mode. Press
Miracast to exit from Miracast (p. 28).
The Player cannot play a disc.
–
–
–
–
–
–
–
–
Video stops.
– The Player will stop if it senses shock or vibration.
The Player makes a snapping sound
when starting playback or loading a
disc.
– These sounds are not malfunctions of the Player but are normal operating conditions.
It takes time to start Blu-ray disc
playback.
– This player searches for a USB memory device used as Local Storage for BD-Live
feature (p. 33) when a Blu-ray disc is loaded. To reduce the waiting time, keep a USB
memory device connected to the one of the USB connectors (front/rear) of this Player
(p. 19).
Take out the disc and clean it (p. 5).
Make sure that the disc is loaded properly (aligned in disc tray and label-side up) (p. 5).
Use a disc supported by the Player (p. 3).
Remove the disc and then check whether the Player supports the disc or not (p. 3).
Check the region code (p. 3).
Check whether the disc is defective by trying another disc.
The CD-R/RW, DVD+R/RW/R DL, and DVD-R/RW/R DL must be finalized (p. 3).
When this Player is in the CD-mode, discs other than music CDs and SA-CDs cannot be
played (p. 26).
47 En
Additional information
5
■ Basic operation
Troubleshooting
■ Picture
Problem
Possible causes and solutions
No picture.
– Make sure that the cables are connected correctly (p. 12).
– Make sure that the connected TV or the AV receiver is set to the correct input.
– With no disc inserted, or playback stopped, press and hold
and
on the front
panel simultaneously to set video resolution to the default value.
If a picture is still not output, press and hold
on the front panel for approximately 5
seconds to switch NTSC/PAL.
– When set to Disc Native, a signal that is not compatible with the connected TV is
output. Change the setting to output a signal that is compatible with the connected TV
(p. 40).
– Make sure that the disc or file you are trying to play back is compatible with this Player
(p. 3).
– Disable the CD mode and Pure Direct mode (p. 26).
Screen freezes and operation buttons
do not work.
– Press , then restart playback.
– Turn off the power and turn on the power again.
– Press and hold p on the front panel for more than 5 seconds to reset this Player.
Video is not output with the desired
resolution.
– Set to the desired resolution (p. 40).
Wide-screen video appears vertically
stretched, or black bands appear at the
top and bottom of the screen. Or 4:3
video appears horizontally stretched.
– Change the aspect ratio of your TV (p. 40).
Square noise (mosaic) appears on the
screen.
– Blocks in images may be visible in scenes with rapid movement due to the
characteristics of digital image compression technology.
■ Sound
Problem
Possible causes and solutions
No sound, or sound is distorted.
–
–
–
–
Left and right channels of audio are
reversed, or sound comes out of only
one side.
– Check the audio connection (p. 14).
Cannot hear the desired audio type and/
or number of channels.
– Refer to Audio Output setting and “Audio output formats” (p. 42, p. 45).
Cannot hear the sound of PIP
(secondary audio).
– Set Coaxial / Optical or HDMI to PCM/Reencode (p. 42).
– To hear secondary audio, press 2ND AUDIO (p. 9).
– Depending on the disc, you may need to set secondary audio on the top menu of the disc
(p. 8).
48 En
Check that the audio cable is connected correctly (p. 12).
Turn the volume of TV or AV receiver up.
There is no sound during still mode, fast forward, and fast reverse (p. 9).
Audio may not be output depending on the audio recording status, such as when audio
other than an audio signal or non-standard audio is recorded for the audio content (p. 3).
– Make sure that the disc or file you are trying to play back is compatible with this Player
(p. 3).
– If the sound is interrupted during playback in the CD mode, disable the CD mode
(p. 26).
Troubleshooting
■ Network
Possible causes and solutions
Cannot connect to the Internet.
– When connecting to the Internet by selecting Wired in Connection setting, connect the
Network cable properly (p. 39).
– Turn on the connected equipment, such as broadband router or modem.
– Connect the broadband router and/or modem properly.
– If Wireless is selected in Connection setting, and when you want to connect to the
Internet using Ethernet, select Wired properly (p. 39).
– Properly select Wireless in Connection setting when you want to connect to the Internet
using a wireless LAN (p. 39).
Cannot download BD-Live contents.
– Verify that this Player can connect to the Internet normally. Refer to “Connection Test”
(p. 39).
– Connect USB memory device properly. Check that the USB memory device is
connected to the USB connector of this Player (p. 19).
– Check if the Blu-ray Disc supports BD-Live.
– Connect the USB memory device formatted in FAT16, FAT32, or NTFS.
– It is recommended to connect the USB memory device with at least 2 GB of free space.
If there is not enough free space, format the USB memory device. (p. 37)
– Refer to the supplied user’s manual of the disc or consult the disc manufacturer.
Cannot detect the DLNA server.
– Verify that this Player can connect to the network normally. Refer to “Connection Test”
(p. 39).
– Turn on the connected equipment, such as broadband router or the server.
– Confirm the Player and the server are connected to the same router (or access point).
– Depending on the DLNA server, the Player may need to be permitted from the server.
– Depending on the DLNA server, it needs to change a firewall setting.
Cannot play the file on the DLNA server.
– Make sure the file is playable (p. 3).
– Check your DLNA server’s setting.
– The playback and operating quality may be affected by your home network condition.
Cannot connect to the Internet via
Wireless LAN.
– Make sure that the wireless LAN router is turned on.
– Depending on the surrounding environment, such as the wall material, radio wave
receiving condition, or obstacles between the Player and the wireless LAN router, the
communication distance may be shortened. Move the Player and the wireless LAN
router closer to each other.
– Devices that use a 2.4 GHz frequency band, such as a microwave, or wireless devices,
may interrupt the communication. Move the Player away from such devices, or turn off
such devices.
– If the Internet connection using a wireless LAN is still not successful by the above
solutions, try using Ethernet by selecting Wired in Connection setting (p. 39).
Wireless network is not found or
distorted.
– Make sure that the wireless LAN router is turned on.
– Move this Player closer to the router or change the orientation of this Player or the
antenna of the wireless LAN router.
– If the wireless connection cannot be configured using the WPS function, select another
option (Scan or Manual) (p. 21).
– Make sure that the wireless network is not disturbed by microwave ovens, digital
cordless phones, or other neighboring Wi-Fi devices.
– Microwave ovens, digital cordless phones or other wireless devices in your
neighborhood might disturb the wireless network. Turn off these devices.
– Make sure that the firewalls in your network allow access to the wireless connection of
this Player.
– If the wireless network does not work properly in your home, try the wired network
connection.
49 En
5
Additional information
Problem
Troubleshooting
■ Messages on the screen
– The following messages appear on the TV screen in case the disc you tried to play back is not appropriate or the
operation is not correct.
Error message
Possible causes and solutions
Unsupported File
– The file is not supported with this Player. See “Types of discs/files that can be used with this Player”
(p. 3).
Wrong region code!
– The disc is an incompatible region code. See “Region management information for Blu-ray Disc/
DVD videos” (p. 3).
Network has FAILED.
– This Player cannot be connected to the network. Check connection (p. 16) and Network setting (p. 39).
Network is OK, proxy has
FAILED.
– This Player cannot be connected to the proxy server. See “Proxy Setting” (p. 39).
BD-Live connection is
prohibited in SETUP menu.
– BD-Live connection is prohibited. See “BD-Live Connection” (p. 39).
Upgrade has failed for some
reason!
– Upgrade is failed. Check if the upgrade file is corrupted or unreadable.
IP Setting is not valid! Please
reset…
– The IP Setting entered is not valid. Enter the correct information again.
50 En
Glossary
AVCHD is a new format (standard) for high definition
video cameras that can be used to record and play highresolution HD images.
BD-Live™
BD-Live is a Blu-ray Disc standard that utilizes a
network connection, enabling this Player to go online to
download promotional videos and other data.
BDMV
BDMV (Blu-ray Disc Movie) refers to one of the
application formats used for BD-ROM which is one of
the Blu-ray Disc specifications. BDMV is a recording
format equivalent to DVD-Video of the DVD
specification.
Blu-ray 3D™
Blu-ray 3D enables you to view full high definition 3D
images.
BONUSVIEW™
BONUSVIEW compatible discs let you simultaneously
enjoy video sub-channel for two screens, audio subchannel and sub-titles. A small screen appears within
the main screen during playback (Picture in Picture).
Closed Caption
Closed captions are kind of subtitle, and the difference
between subtitles and captions is that subtitles are
intended for hearing persons and captions are for the
hearing impaired. Subtitles rarely show all of the audio.
For example, captions show sound effects (e.g., “phone
ringing” and “footsteps”), while subtitles do not. Before
you select this setting, please ensure that the disc
contains closed caption information.
Color Space
Color Space is a color range that can be represented.
RGB is a color space based on the RGB color model
(red, green and blue) and is typically used for PC
monitors. YCbCr is a color space based on a luminance
signal (Y) and two color difference signals (Cb and Cr).
Deep Color
Deep Color refers to the use of various color depths in
displays, up from the 24-bit depths in previous versions
of the HDMI specification. This extra bit depth allows
HDTVs and other displays go from millions of colors to
billions of colors and eliminate on-screen color banding
for smooth tonal transitions and subtle gradations
between colors. The increased contrast ratio can
represent many times more shades of gray between
black and white. Also Deep Color increases the number
of available colors within the boundaries defined by the
RGB or YCbCr color space.
DLNA
DLNA (Digital Living Network Alliance) provides easy
sharing of digital media through network in the home,
and you can enjoy digital contents stored on your
DLNA-server-software-installed PC or other DLNA
compatible device with your TV via this Player. To
connect this Player to your DLNA servers, some
settings for the DLNA server or device are required. For
details, refer to your DLNA server software or DLNA
device.
Dolby Digital
A sound system developed by Dolby Laboratories Inc.
that gives movie theater ambience to audio output when
the product is connected to a Dolby Digital processor or
amplifier.
Dolby Digital Plus
A sound system developed as an extension to Dolby
Digital. This audio coding technology supports 7.1
multi-channel surround sound.
Dolby TrueHD
Dolby TrueHD is a lossless coding technology that
supports up to 8 channels of multi-channel surround
sound for the next generation optical discs. The
reproduced sound is true to the original source bit-forbit.
DRC (Dynamic Range Control)
DRC lets you adjust the range between the loudest and
softest sounds (dynamic range) for playback at average
volume. Use this when it is hard to hear dialog, or
during times when playback may disturb neighbors.
DTS
This is a digital sound system developed by DTS, Inc.
for use in cinemas.
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a new technology
developed for the next generation high definition optical
disc format.
DTS-HD Master Audio
DTS-HD Master Audio is a lossless audio compression
technology developed for the next generation high
definition optical disc format.
51 En
5
Additional information
AVCHD
Glossary
FLAC
FLAC (Free Lossless Audio Codec) is an open file
format for lossless audio data compression. While
inferior in compression rate to other lossy compressed
audio formats, it can often provide higher audio quality.
HDMI
HDMI (High-Definition Multimedia Interface) is an
interface that supports both video and audio on a single
digital connection. The HDMI connection carries
standard to high definition video signals and multichannel audio signals to AV components such as HDMI
equipped TVs, in digital form without degradation.
Letterbox (LB 4:3)
A screen size with black bars on the top and bottom of
the image to allow viewing of wide-screen (16:9)
material on a connected 4:3 TV.
Linear PCM Sound
Linear PCM is a signal recording format used for Audio
CDs and on some DVD and Blu-ray Discs. The sound
on Audio CDs is recorded at 44.1 kHz with 16 bits.
(Sound is recorded between 48 kHz with 16 bits and 96
kHz with 24 bits on DVD discs and between 48 kHz
with 16 bits and 192 kHz with 24 bits on Blu-ray Discs.)
52 En
Mac address
The Mac address is a unique value assigned to a network
device for identification purposes.
Pan Scan (PS 4:3)
A screen size that cuts off the sides of the image to allow
viewing of wide-screen (16:9) material on a connected
4:3 TV.
Subtitles
These are the lines of text appearing at the bottom of the
screen which translate or transcribe the dialog. They are
recorded on many DVDs and Blu-ray Discs.
x.v.Color
x.v.Color reproduces a greater range of color than
before, showing almost all of the colors that the human
eye can detect.
Specifications
Power supply
[U.S.A. and Canada models].......................................... AC 120 V, 60 Hz
[Europe, Russia and Australia models]
................................................................................ AC 110–240 V, 50 Hz
[Korea model] ........................................................ AC 110–240 V, 60 Hz
Power consumption .............................................................................. 20 W
Standby power consumption
HDMI Control Off, Network Standby Off....................................... 0.4 W
HDMI Control On, Network Standby Off ....................................... 0.5 W
HDMI Control Off, Network Standby On
Wired............................................................................................. 2.0 W
Wireless......................................................................................... 2.3 W
HDMI Control On, Network Standby On
Wired............................................................................................. 2.0 W
Wireless......................................................................................... 2.3 W
Dimensions (W × H × D, including protrusions) ......... 435 × 86 × 262 mm
(17-1/8 × 3-3/8 × 10-3/8 in)
Weight ..................................................................................3.8 kg (8.4 lbs.)
■ Audio performance
Audio output level (1 kHz, 0 dB)
Blu-ray Disc/DVD/CD-DA.........................................................2 ± 0.3 V
Signal to noise ratio (IHF-A Network)
Blu-ray Disc/DVD/CD-DA...............................................115 dB or more
Dynamic range (IHF-A Network)
Blu-ray Disc/DVD ............................................................110 dB or more
CD-DA ........................................................................................... 100 dB
Harmonic distortion (1 kHz)
Blu-ray Disc/DVD/CD-DA................................................ 0.002% or less
Frequency Response
Blu-ray Disc/DVD ............................. 4 Hz to 22 kHz (48 kHz Sampling)
4 Hz to 44 kHz (96 kHz Sampling)
CD-DA ...............................................................................4 Hz to 20 kHz
■ Input/output
HDMI output .............................................................. Type A connector × 1
480i/576i/480p/576p/720p/1080i/1080p/1080p@24Hz/4K(2160p)@24Hz,
Deep Color, x.v. Color support
Digital output.......................................................... Optical × 1, Coaxial × 1
Analog audio output ............Analog out (L/R) × 1, Balanced out (L/R) × 1
USB ............................................................................ Type A connector × 2
Wireless LAN..................................................Standard: IEEE 802.11 b/g/n
Frequency range: 2.4GHz band
(channels: 1-11)
Other equipment ...........................................................Remote IN/OUT × 1
Ethernet × 1
* The contents of this manual apply to the latest specifications as of the
publishing date. To obtain the latest manual, access the Yamaha
website then download the manual file.
■ Copyright
Note
– Audio-visual material may consist of copyrighted
works which must not be recorded without the
authority of the owner of the copyright. Refer to
relevant laws in your country.
“Blu-ray Disc™”, “Blu-ray™”, “Blu-ray 3D™”, “BDLive™”, “BONUSVIEW™”, and the logos are
trademarks of the Blu-ray Disc Association.
is a trademark of DVD Format/Logo Licensing
Corporation.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, DTSHD, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS-HD Master Audio is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
“HDMI,” the “HDMI” logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States
and other countries.
x.v.Color™
“x.v.Color” and “x.v.Color” logo are trademarks of Sony
Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
Continued to the next page. \
53 En
5
Additional information
■ General
Specifications
Java is a registered trademark of Oracle and/or its
affiliates.
DLNA™ and DLNA CERTIFIED™ are trademarks or
registered trademarks of Digital Living Network Alliance.
All rights reserved. Unauthorized use is strictly prohibited.
The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
The Wi-Fi Protected Setup Identifier Mark is a mark of
the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct” and
“Miracast” are marks or registered marks of the Wi-Fi
Alliance.
This product is licensed under the AVC patent portfolio
license and VC-1 patent portfolio license for the personal
and non-commercial use of a consumer to (i) encode video
in compliance with the AVC Standard and VC-1 Standard
(“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1
Video that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was obtained
from a video provider licensed to provide AVC/VC-1
Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from
MPEG LA, LLC. See http://www.mpegla.com.
This product is licensed under the MVC patent portfolio
license for the personal use of a consumer or other uses in
which it does not receive remuneration to (i) encode video
in compliance with the MVC Standard (“MVC Video”)
and/or (ii) decode MVC Video that was encoded by a
consumer engaged in a personal activity and/or was
obtained from a video provider licensed to provide MVC
Video. No license is granted or shall be implied for any
other use. Additional information may be obtained from
MPEG LA, LLC. See http://www.mpegla.com
Windows Media Player is a registered trademark or
trademark of Microsoft corporation in the United States
and/or other countries
Copyright 2004-2012 Verance Corporation. Cinavia® is a
Verance Corporation trademark. Protected by U.S. Patent
7,369,677 and worldwide patents issued and pending under
license from Verance Corporation. All rights reserved.
54 En
ADDITIONAL INFORMATION
Index
Numerics
2ch Downmix, SETUP menu ...............42
2ND AUDIO, remote control ................9
3D Output, SETUP menu ....................40
3D Playback Message,
SETUP menu ...................................37
■
A
A/B, remote control .............................10
Angle Mark, SETUP menu ..................38
Angle, On Screen menu .......................30
ANGLE, remote control ........................8
Audio Output, SETUP menu ...............42
Audio Setting, SETUP menu ...............42
Audio, On Screen menu .......................30
AUDIO, remote control .........................8
Audio, SETUP menu ...........................38
Auto Power Standby, SETUP menu ....37
AV CONTROLLER ............................29
■
B
BD-Live ...............................................33
BD-Live Connection, SETUP menu ....39
Bitrate, On Screen menu ......................30
■
C
CC Select, On Screen menu .................30
CD Mode ..............................................26
Change Password, SETUP menu .........38
Chapter, On Screen menu ....................30
CLEAR, remote control .........................9
Closed Caption, SETUP menu .............41
Coaxial / Optical, SETUP menu ..........42
Color buttons, remote control ................8
Color Space, SETUP menu ..................40
Connection Setting, SETUP menu .......39
Connection Test, SETUP menu ...........39
Control buttons, remote control ............. 9
Country Code, SETUP menu ...............38
Cursor buttons, remote control ..............8
■
D
De-interlacing Mode, SETUP menu ....41
Digital Media Controller (DMC) .........17
Disc Auto Playback, SETUP menu .....38
Display Setting, SETUP menu .............40
DLNA ..................................................17
Downsampling, SETUP menu .............42
DRC, SETUP menu .............................42
■
E
Easy Setup, SETUP menu ...................37
ENTER, remote control .........................8
■
G
General Setting, SETUP menu ............37
■
H
HDMI 1080p 24Hz, SETUP menu ......41
HDMI Control function .......................37
HDMI Control, SETUP menu .............37
HDMI Deep Color, SETUP menu .......40
HDMI, SETUP menu ...........................42
HOME, remote control ...........................8
■
I
Information, SETUP menu ...................39
Ins Replay, On Screen menu ................30
Ins Search, On Screen menu ................30
IP Setting, SETUP menu ......................39
■
L
Language, SETUP menu ......................38
Last Memory, SETUP menu ................38
Load Default, SETUP menu ................37
Local Storage, SETUP menu ...............37
■
M
Menu, SETUP menu ............................38
Miracast ................................................28
Mode/Play Mode, On Screen menu .....30
Security, SETUP menu ........................ 38
SETUP menu ....................................... 34
SETUP menu operation ....................... 36
SETUP, remote control ..................... 8, 9
SHUFFLE, remote control .................... 9
Slide Show, On Screen menu .............. 30
Software upgrade ................................. 46
Speaker Setting, SETUP menu ............ 42
Status menu ......................................... 31
STATUS, remote control ....................... 9
Subtitle Style, On Screen menu ........... 30
Subtitle, On Screen menu .................... 30
SUBTITLE, remote control ................... 8
Subtitle, SETUP menu ......................... 38
System Information, SETUP menu ..... 43
System, SETUP menu ......................... 37
■
T
Network Control, SETUP menu ..........39
Network, SETUP menu ........................39
Noise Reduction, SETUP menu ...........41
Number buttons, remote control ............9
Time, On Screen menu ........................ 30
Title, On Screen menu ......................... 30
TOP MENU, remote control ................. 8
Track/File, On Screen menu ................ 30
Transition, On Screen menu ................ 30
TV Screen, SETUP menu .................... 40
TV System, SETUP menu ................... 40
TV, SETUP menu ................................ 40
■
■
■
N
O
On Screen menu ...................................30
ON SCREEN, remote control ................9
OSD, SETUP menu ..............................38
■
P
Parental Control, SETUP menu ...........38
PBC (Push Button Configuration) .......39
Picture in Picture function ....................33
PIN code (WPS) ...................................39
PIP Mark, SETUP menu ......................38
PIP, remote control .................................9
Playback, SETUP menu .......................38
POP UP/MENU, remote control ............9
Post Process, SETUP menu ..................43
Program play ........................................32
PROGRAM, remote control ...................9
Proxy Setting, SETUP menu ................39
PURE DIRECT ......................................9
Pure Direct ...........................................26
■
U
Upgrade Notification ........................... 37
Upgrade of software ............................ 46
Upgrade, SETUP menu ....................... 37
UpMix, SETUP menu ......................... 43
■
V
Video Process, SETUP menu .............. 41
VUDU .................................................. 24
■
W
Wi-Fi Direct ......................................... 27
WPS (Wi-Fi Protected Setup) ............. 39
■
X
XLR balanced connection ................... 15
■
Z
ZOOM, remote control .......................... 8
R
Remote control .......................................8
Remote control (in/out) ........................18
REPEAT, remote control .....................10
RETURN, remote control ......................8
■
S
Search function .....................................32
SEARCH, remote control .......................9
Second Audio, On Screen menu ..........30
Second Video, On Screen menu ...........30
Secondary Audio Mark,
SETUP menu ...................................38
55 En
5
Additional information
■
The laser component in this product is capable of
emitting radiation exceeding the limit for Class 1.
LASER Specification:
Class 1 LASER Product
Wave length: 790 nm (CDs)/658 nm (DVDs)/405 nm
(BDs)
Laser output: max. 1 mW
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN.
DO NOT STARE INTO BEAM.
DANGER: INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO THE BEAM.
i
Yamaha Global Site
http://www.yamaha.com/
Yamaha Downloads
http://download.yamaha.com/
Manual Development Group
© 2016 Yamaha Corporation
Published 10/2016 YJ-W-B0
BD-A1060/U
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising