Yamaha | BEX4 | Owner's Manual | Yamaha BEX4 Owner's Manual

Yamaha BEX4 Owner's Manual
BEX 4 CONTROL SYSTEM
3-BAND EQUALIZER
MAGNETIC PICKUP
BATTERY COMPARTMENT
PIEZO PICKUP ON BRIDGE
MASTER VOLUME CONTROL
BALANCE CONTROL FOR
MAGNETIC PICKUP / PIEZO PICKUP
MAGNETIC PICKUP
PIEZO PICKUP
OUTPUT JACK
■ 3-Band Equalizer
EQUALIZER Controls
LOW : Boosts or cuts the level of the
low frequencies.
MID : Boosts or cuts the level of the
middle frequencies.
HIGH : Boosts or cuts the level of the
high frequencies.
BAT. (Battery Check) Indicator
This indicator will light when the battery
needs to be replaced.
Please replace the battery as soon as
possible when the BAT. indicator lights
(see battery replacement below).
■ Battery Replacement
DC9V
6F22
(S-006P)
Catch
q Press the catch on the battery holder
in the direction indicated by the arrow
in the illustration in order to unlock it.
w Remove the old battery from the battery case, and insert the new battery
making sure that the (+) and (–) terminals of the battery.
Use only a DC9V, 6F22 (S-006P) or
equivalent battery.
e Press firmly so that the battery case
locks into place.
QC54910
99.Nov.
Printed in Taiwan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising