YAS-108/ATS-1080 firmware update manual This document is firmware update procedure manual for YAS-108/ATS-1080 using USB package. PROCEDURE 1. Save 1 file of unit’s firmware in a USB flash memory. 108FWxxx.108 2. Turn off the unit. 3. Connect USB flash memory to [UPDATE ONLY] jack on the unit’s rear panel. 4. Press the POWER button on the front panel while pressing the VOLUME－ button on the unit. The firmware update will begin. During update, the indicator on the front panel repeats the following display. When finished update, the all indicator flashes.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project