Yamaha | DVD-S1200 | Owner's Manual | Yamaha DVD-S1200 Owner's Manual

Yamaha DVD-S1200 Owner's Manual
GB
NATURAL SOUND
DVD AUDIO / VIDEO PLAYER
DVD-S1200
GROUP
VIDEO OFF
AUDIO/ VIDEO
LEVEL
PHONES
STANDBY
STANDBY
/ON
0
10
AU
DIO
POW
ER
Í/
/VI
DEO
I
OPE
1
N/CLO
SE
2
3
5
4
6
7
9
VIDEO
TOP
MEN
8
0
SET
UP
OFF
CAN
S10
GR
OU
P
MAR
CEL
KER
PAG
E
U
DVD AUDIO/VIDEO PLAYER
ME
NU
ON SC
PLAY
REEN
MOD
REPEA
T
SKIP
DV
D
V756
260
ENTE
E SU
B
A-B
TITL
RETU
E
AUD
IO
RN
ANG
LE
HP-V
.S.S
. S
P-V.S
.S.
SLO
W/S
STO
P
R
PAU
SE
EAR
CH
PLA
Y
Owner’s manual
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
AUDIO/ VIDEO
Dear customer
Table of contents
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
Operations in these instructions are described mainly
with the remote control, but you can do the operations on
the main unit if the controls are the same.
Getting started
Accessories
Please check and identify the supplied
accessories.
¸ Remote control . . . . . . . . . . . . . . 1
¸ Batteries . . . . . . . . . . . . . . . . . . . . 2
for remote control
¸ AC mains lead . . . . . . . . . . . . . . . 1
For the United
Kingdom
For others
Getting started
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Caution for AC Mains Lead . . . . . . . . . . . . . . . . .
Safety precautions . . . . . . . . . . . . . . . . . . . . . . .
The remote control . . . . . . . . . . . . . . . . . . . . . . .
Disc information . . . . . . . . . . . . . . . . . . . . . . . . .
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting an AV amplifier with a built-in decoder . . . . . . . . . .
Connection to digital audio equipment without a
decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting an AV amplifier with 5.1-channel audio input
terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Analog connection to a 2-channel amplifier or system
component . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connections using the S video terminal . . . . . . . . . . . . . . . . . .
Connecting to a television and a video cassette recorder
with 21-pin SCART terminal . . . . . . . . . . . . . . . . . . . . . . . . .
Recording to MDs or cassette tapes . . . . . . . . . . . . . . . . . . . . .
02
03
04
04
05
06
07
07
08
08
09
09
09
Control reference guide . . . . . . . . . . . . . . . . . . . 10
Basic operations
Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
¸ Audio/video cable . . . . . . . . . . . . 1
Note
The included AC mains lead is for use with this unit only. Be
sure to use the included AC power supply cord with this unit.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
Advanced operations
Marking places to play again–MARKER . . . . . . 15
Changing soundtracks, subtitle languages and
angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Changing the play sequence . . . . . . . . . . . . . . . 16
Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
All group play/Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
A-B repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Enjoying virtual surround effects with 2 speakers or
headphones (VIRTUAL SURROUND (V.S.S.)) . . . . . . . . . . . 19
- AVATTAESSA OLET ALTTIINA NÄKYVÄÄ JA NÄKYMÄTÖN
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
Using headphones . . . . . . . . . . . . . . . . . . . . . . . 19
Using GUI screens . . . . . . . . . . . . . . . . . . . . . . . 20
VARNING - SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD. BETRAKTA EJ STRÅLEN.
ADVARSEL - SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES.
UNNGÅ EKSPONERING FOR STRÅLEN.
VORSICHT - SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG
GEÖFFNET. NICHT DEM STRAHL AUSSETZEN.
-
RQLS0233
12
12
13
13
13
13
14
14
14
Increasing your enjoyment of movies and
music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
- VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
(FDA 21 CFR)
AVOID DIRECT EXPOSURE TO BEAM.
CAUTION - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
(IEC60825-1)
ATTENTION - RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D’OUVERTURE.
EXPOSITION DANGEREUSE AU FAISCEAU.
ADVARSEL - SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING.
UNDGÅ UDSÆTTELSE FOR STRÅLING.
DANGER
VARO!
Resume function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting play from a selected title or track . . . . . . . . . . . . . . . . .
Skipping chapters or tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frame-by-frame viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fast forward and rewind–SEARCH . . . . . . . . . . . . . . . . . . . . .
Slow-motion play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting still pictures–Page Skip . . . . . . . . . . . . . . . . . . . . . . .
Selecting groups to play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To enjoy even higher quality sound–VIDEO OFF . . . . . . . . . .
(Inside of unit)
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen for disc information . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shuttle screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen for unit information . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
21
21
22
Changing settings . . . . . . . . . . . . . . . . . . . . . . . . 23
Common procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Television settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Speaker setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digital output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering a password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23
24
26
27
28
28
Reference
2
(Back of unit)
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Disc handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . 30
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Specifications . . . . . . . . . . . . . . . . . . . . Back cover
Caution for AC Mains Lead
(For United Kingdom)
For your safety, please read the following text
carefully.
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure
that the replacement fuse has a rating of 5-ampere and
that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark m or the BSI mark o on the
body of the fuse.
If the plug contains a removable fuse cover you must
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used
until a replacement cover is obtained.
A replacement fuse cover can be purchased from your
local dealer.
WARNING: DO NOT CONNECT EITHER WIRE TO
THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E, BY THE EARTH SYMBOL n OR
COLOURED GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of
AC mains plug (figures A and B). Confirm the AC
mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
Getting started
(U.K. model only)
1. Open the fuse cover with a screwdriver.
Figure A
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR
HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring
code as stated below.
If in any doubt please consult a qualified electrician.
Figure B
Fuse cover
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to
the terminal which is marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected
to the terminal which is marked with the letter L or coloured Brown or Red.
2. Replace the fuse and close or attach the fuse
cover.
Figure A
Fuse
(5 ampere)
Figure B
Fuse
(5 ampere)
3
Safety precautions
Placement
The remote control
Batteries
Getting started
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life.
Do not place heavy items on the unit.
R6, AA
1
2
Voltage
Do not use high voltage power sources. This can overload the unit
and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric
shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit.
³Insert so the poles (i and j) match those in the remote control.
³Do not use rechargeable type batteries.
Do not;
³mix old and new batteries.
³use different types at the same time.
³heat or expose to flame.
³take apart or short circuit.
³attempt to recharge alkaline or manganese batteries.
³use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Remove if the remote control is not going to be used for a long period
of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control even when
held close to the front panel.
Use
Remote control signal sensor
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is not
covered in these instructions occurs, disconnect the AC mains lead
and contact your dealer or an authorized service center. Electric
shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons.
7m
30°
30°
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
Do not place the unit
on amplifiers or equipment that may become
hot.
The heat can damage the unit.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE
TO RAIN, SPLASHING, DRIPPING OR MOISTURE.
4
Aim at the sensor, avoiding obstacles, at a maximum range of 7 m
directly in front of the unit.
³Keep the transmission window and the unit’s sensor free from dust.
³Operation can be affected by strong light sources, such as direct
sunlight, and the glass doors on cabinets.
Do not;
³put heavy objects on the remote control.
³take the remote control apart.
³spill liquids onto the remote control.
Disc information
a
º Discs that can be played [A]
Disc type
Logo
b
c
¤
d
Region
number
Video
system
Indication
used in
instructions
DVDAudio¤
=
–
PAL/NTSC
[DVD-A]
DVDVideo¤
>
See below
PAL/NTSC
[DVD-V]
Video CD¤
?
–
PAL/NTSC
[VCD]
Audio CD
@
–
–
[CD]
See the table below for details on how video appears when playing
DVD-Video, Video CD and DVD-Audio. You can still enjoy the audio
on DVD-Audio irrespective of any differences in video systems.
Getting started
A
Some DVD-R and DVD-RW can be played.
º Region Management Information (DVD-Video
only) [B]
B
2
Region numbers are allocated to DVD players and software according to where they are sold.
The region number of this unit is “2”.
DVD-Video can be played on this unit if their region number is the
same or includes the same number, or if the DVD is marked “ALL”.
Confirm the region number for this unit before choosing discs. The
number for this unit is indicated on the rear panel of the unit.
º Discs that cannot be played
DVD-ROM, DVD-R/DVD-RAM, CD-ROM, VSD, CDV, CD-G, +RW,
DVD-RW, CVD, SVCD, SACD, Divx Video Discs and Photo CD.
º DVDs that can be played [C]
This unit has a Dolby Digital decoder and a DTS decoder so you can
play DVDs with these marks.
2 ALL
C
º Type of disc for the type of connected TV
DVDs and Video CDs are recorded using either PAL or NTSC.
Refer to this table when selecting discs.
TV type
Disc
TV Monitor
Multisystem TV
PAL
Y
NTSC
Y¤1
PAL
t
NTSC
t
PAL
Y
NTSC
Y¤2
NTSC TV
PAL TV
¤1
If you select “NTSC” in “NTSC Disc Output” (á page 24), the
picture may be clearer.
¤2
The factory preset for “NTSC Disc Output” is “PAL60”, so no
changes to the settings are necessary.
(If your television is not equipped to handle PAL 525/60 signals the
picture will not be shown correctly.)
Note
When a disc which does not comply with Video CD standard is
played, the bottom part of the picture may disappear.
º Playing DVDs and Video CDs
The producer of the material can control how these discs are played.
This means that you may not be able to control play of a disc with
some operations described in these operating instructions. Read the
disc’s instructions carefully.
5
Connection
As this unit has built-in Dolby Digital and DTS decoders (á page 29), you can enjoy discs recorded with these systems by connecting this unit to the
6-channel input terminals on an AV amplifier (connection [B] below). However, to enjoy the special sound effects available with AV amplifiers that
can make you feel like you were in a cinema or hall, connect this unit digitally to the AV amplifier (connection [A] below).
Use analog connection [B] to enjoy the high quality audio (sampling frequencies of 192 kHz and 96 kHz) and multi-channel audio found
on DVD-Audio. If the disc is copyright-protected, the audio can only be output through the digital output terminal if it is converted to
48 kHz.
Getting started
What you want to do
To enjoy 5.1-channel surround
sound
How to do it
[Digital\connection]
Reference
page
7 [A]
24
PCM Down Conversion
Dolby Digital
DTS Digital Surround
MPEG
Settings depend on your
decoding equipment.
28
Make the speaker settings on
the amplifier.
–
8 [B]
Speaker Setting
Select “Multi-channel”.
27
7 [C]
Digital Audio Output
Select “On”.
24
PCM Down Conversion
Select “Yes”.
Dolby Digital/DTS Digital
Surround/MPEG
Select “PCM”.
28
Connect to an amplifier with
5.1-channel audio input
terminals.
To enjoy stereo
[Digital\connection]
Connect to an amplifier with a
digital input terminal.
[Analog\connection]
Reference
page
Digital Audio Output
Select “On”.
Connect to an amplifier with a
built-in decoder or a separate
decoder-amplifier combination.
[Analog\connection]
Settings
8 [D]
Connect to an amplifier or
system component with analog
input terminals.
º Other uses
Recording to MDs or cassette tapes (á page 9).
Note
³The equipment connections described are examples.
³Peripheral equipment and optional cables sold separately unless otherwise indicated.
³Before connection, turn off all equipment and read the appropriate operating instructions.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
6
Manufactured under license from Digital Theater Systems,
Inc. US Pat. No.5,451,942, 5,956,674, 5,974,380, 5,978,762
and other world-wide patents issued and pending. “DTS” and
“DTS Digital Surround” are registered trademarks of Digital
Theater Systems, Inc. + 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
A
»
Connecting an AV amplifier with a built-in decoder
Before connection
³Do not connect the AC mains lead until all other connections are complete.
³Refer to the amplifier’s operating instructions.
Audio/video cable (included)
Yellow (VIDEO)
White (L)
Television
MONITOR OUT
terminal
Speakers
³You can enjoy surround sound by connecting from
three to six speakers.
Example: Six speakers
³If you do not connect a subwoofer, it is advisable to
connect main speakers (L/R) capable of producing
bass of less than 100 Hz.
VIDEO
IN
Video cable
VOLUME
INPUT
INPUT MODE
NATURAL SOUND AV RECEIVER RX–V3000
STANDBY
/ON
SPEAKERS
A
B
Do not connect the unit’s video output
through a video cassette recorder
The video from this unit may not be played correctly
due to copy-guards if you connect a video cassette
recorder between the unit and your television.
SOURCE
/REMOTE
DVD
D-TV/LD
SILENT
SAT
VCR 1
VCR 2/DVR
VIDEO AUX
BASS
TREBLE
EFFECT
PRESET
/TUNING
FM/AM
MEMORY
TUNING
MODE
MD/TAPE
CD-R
TUNER
CABLE
BASS PROCESSOR
EXTENSION DIRECT
PHONES
CD
6CH
PHONO INPUT
MAN'L/AUTO FM AUTO/NAN'L MONO
EDIT
S VIDEO
VIDEO
L AUDIO R
OPTICAL
DSP
PROGRAM
VIDEO AUX
REC OUT/ZONE 2
AV amplifier
DIGITAL INPUT
(OPTICAL) terminal
DIGITAL INPUT
(COAXIAL) terminal
VIDEO INPUT
terminal
Note when connecting the
optical digital audio cable
Remove the
dust cap
Getting started
Red (R)
Optical
digital
audio cable
Do not bend
when
connecting.
Coaxial
cable
FOR UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC
MAINS LEAD ON
PAGE 3 BEFORE
CONNECTION.
To household mains socket
(AC 220–240 V, 50 Hz)
Audio/video cable
(included)
OR
AC mains lead
(included)
AV1
Align the plug with
the terminal
Note
Keep the dust cap and reattach
when not using the terminal.
AUDIO OUT
PCM /
DTS
DIGITAL
VIDEO OUT
6CH DISCRETE
CENTER
SURROUND
L
OPTICAL COAXIAL
MAIN
MIXED 2CH
VIDEO
L
1
AC IN
AV2
L
S VIDEO
R
SUBWOOFER
R
R
2
Back of the unit
Change PCM Down Conversion, Dolby Digital, DTS
Digital Surround, and MPEG to suit the equipment
(á pages 24 and 28).
Note
You cannot use DTS Digital Surround decoders not suited to DVDVideo.
C
»
Connection to digital audio
equipment without a decoder
You can still enjoy audio using the connections described
above. Make the following settings (á pages 24 and 28).
Digital Audio Output
Select “On”
PCM Down Conversion
Select “Yes”.
Dolby Digital/DTS Digital Surround/MPEG
Select “PCM”.
7
Connection
B
»
Connecting an AV amplifier with 5.1-channel audio input terminals
Be sure to switch the amplifier to ANALOG input.
³Speaker connections (á page 7)
³Television connections (á pages 7 and 9)
AV amplifier
VOLUME
INPUT
R
INPUT MODE
Getting started
NATURAL SOUND AV RECEIVER RX–V3000
L
STANDBY
/ON
SPEAKERS
A
B
SOURCE
/REMOTE
DVD
D-TV/LD
SILENT
SAT
VCR 1
VCR 2/DVR
VIDEO AUX
BASS
TREBLE
EFFECT
PRESET
/TUNING
FM/AM
MEMORY
TUNING
MODE
MD/TAPE
CD-R
TUNER
CABLE
BASS PROCESSOR
EXTENSION DIRECT
PHONES
CD
6CH
PHONO INPUT
REC OUT/ZONE 2
EDIT
MAN'L/AUTO FM AUTO/NAN'L MONO
S VIDEO
VIDEO
L AUDIO R
OPTICAL
DSP
PROGRAM
VIDEO AUX
6CH INPUT
terminals
Audio cable
Audio cable
AV1
AUDIO OUT
PCM /
DTS
DIGITAL
VIDEO OUT
6CH DISCRETE
CENTER
SURROUND
L
OPTICAL COAXIAL
MIXED 2CH
VIDEO
L
1
MAIN
AV2
L
S VIDEO
R
SUBWOOFER
R
R
2
Back of the unit
Select “Multi-channel” and adjust the settings to suit the speakers you have connected (á page 27).
Note
Turn Virtual Surround off (á page 19) if you have connected a center speaker, rear speakers or a subwoofer, as well as the main speakers. Sound
will not come from the other speakers if Virtual Surround is on.
D
»
Analog connection to a 2-channel amplifier or system component
Television
Audio cable
L
VIDEO
IN
Video cable
R
AUX IN
2-channel amplifier or system component
Select “2-channel”
(á page 24, Audio–Speaker
Setting).
Back of the unit
AV1
AUDIO OUT
PCM /
DTS
DIGITAL
VIDEO OUT
6CH DISCRETE
CENTER
SURROUND
L
OPTICAL COAXIAL
MAIN
MIXED 2CH
VIDEO
L
1
AV2
AC IN
L
S VIDEO
R
SUBWOOFER
R
R
2
To enjoy Dolby Pro Logic
³If you connect an amplifier that can decode Dolby Pro Logic, you will also need to connect center and rear speakers to enjoy surround
sound. Read the instructions for the equipment for connection details.
³Turn Virtual Surround off (á page 19). Dolby Pro Logic will not function correctly if Virtual Surround is on.
8
Connections using the S video terminal
Audio connections (á pages 7 and 8)
Television
AV amplifier
Back of the unit
VOLUME
INPUT
INPUT MODE
NATURAL SOUND AV RECEIVER RX–V3000
AV1
STANDBY
/ON
SOURCE
/REMOTE
DVD
D-TV/LD
SAT
VCR 1
VCR 2/DVR
VIDEO AUX
BASS
TREBLE
PRESET
/TUNING
EDIT
TUNER
CABLE
BASS PROCESSOR
EXTENSION DIRECT
PHONES
EFFECT
FM/AM
MEMORY
TUNING
MODE
AUDIO OUT
MD/TAPE
CD-R
CD
6CH
PHONO INPUT
MAN'L/AUTO FM AUTO/NAN'L MONO
S VIDEO
VIDEO
L AUDIO R
OPTICAL
PCM /
DTS
DSP
PROGRAM
VIDEO AUX
REC OUT/ZONE 2
VIDEO OUT
DIGITAL
6CH DISCRETE
CENTER
SURROUND
L
OPTICAL COAXIAL
MAIN
MIXED 2CH
VIDEO
L
1
AV2
L
S VIDEO
R
SUBWOOFER
R
R
2
VIDEO or S video
input terminal
Video cable
VIDEO
INPUT
terminal
MONITOR OUT
terminal
Getting started
SPEAKERS
A
B
SILENT
S video cable
The S-VIDEO terminal achieves a
more vivid picture than the VIDEO terminal by separating the chrominance
(C) and luminance (Y) signals. (Actual
results depend on the television.)
Connecting to a television and a video cassette recorder with a 21-pin SCART
terminal
To improve picture quality, you can change the video signal output from the AV1
terminal from “Video” to either “S-Video” or “RGB” to suit the type of television you
are using (á page 24, Video—AV 1 Output).
SCART terminal
VCR
21-pin SCART cable
Example
VCR
Television
AV1
AV2
This unit
AV1
AUDIO OUT
PCM /
DTS
DIGITAL
VIDEO OUT
6CH DISCRETE
CENTER
SURROUND
L
OPTICAL COAXIAL
MAIN
MIXED 2CH
VIDEO
L
1
AV2
AC IN
AV1
L
S VIDEO
R
R
SUBWOOFER
R
Video cassette
recorder
2
Recording to MDs or cassette tapes
º Analog recording
º Digital recording
You can record to an MD or cassette deck. Using analog connection
means sound will be unaffected by the copy guards found on DVDs.
To make an analog recording
Connect the recording equipment with an audio cable (á [D] page 8).
You can record the digital signal directly onto an MD.
The signals on DVDs will be converted to 48 kHz/16 bit linear PCM.
Ensure the following conditions are met.
³There is no copy guard recorded on the disc.
³The recording equipment can handle a sampling frequency of
48 kHz/16 bit.
To make a digital recording
1. Connect the recording equipment with an optical or coaxial digital
audio cable (á [A] page 7).
2. When recording DVDs, change the digital audio output settings
(á page 24 and 28).
PCM Down Conversion: Yes
Dolby Digital/DTS Digital Surround: PCM
MPEG: PCM
Digital Audio Output: On (á page 24)
VIRTUAL SURROUND (V.S.S.): OFF (á page 19)
9
Control reference guide
AUDIO/VIDEO
Getting started
>
1
2
3
4
?
5
POWER
OPEN/CLOSE
Í/ I
1
2
3
5
6
7
NATURAL SOUND
DVD AUDIO / VIDEO PLAYER
@
;
DVD-S1200
GROUP
VIDEO OFF
AUDIO/ VIDEO
STANDBY
PHONES
LEVEL
STANDBY
/ON
0
10
> = < ;
:
9
8 7 6
A
B
C
D
E
F
SET UP
MARKER
VIDEO OFF GROUP
4
K
PAGE
TOP MENU
I
J
MENU
L
ENTER
ON SCREEN
RETURN
PLAY MODE SUBTITLE
REPEAT
A-B
STOP
DVD
V756260
AUDIO
ANGLE
HP-V.S.S. SP-V.S.S.
SLOW/SEARCH
PAUSE
PLAY
M
N
O
P
Q
8
7
Remote control
Page
1 Standby indicator (STANDBY)
When the unit is connected to the AC mains supply, this indicator
lights up in standby mode and goes out when the unit is turned on.
2 VIDEO OFF indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3 Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4 GROUP button (GROUP) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5 Skip/Search buttons (:/6, 5/9) . . . . . . . . . . . . . 13
6 Stop button (º) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7 Pause button (;) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8 Play button (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9 Disc tray open/close button (<) . . . . . . . . . . . . . . . . . . . . . 11
: Display
; VIDEO OFF button (VIDEO OFF) . . . . . . . . . . . . . . . . . . . . . 14
< Headphone level control (LEVEL) . . . . . . . . . . . . . . . . . . . . 19
= Headphone jack (PHONES) . . . . . . . . . . . . . . . . . . . . . . . . . 19
> Standby/on switch (STANDBY/ON) . . . . . . . . . . . . . . . . . . . 11
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of
power.
10
8
S10
0
SKIP
G
H
6
Main unit
4
CANCEL
9
9
Buttons such as " function the same as the controls on the unit.
Page
?
@
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Numeric buttons (1–9, 0, S10) . . . . . . . . . . . . . . . . . . . . . . . 11
Setup button (SET UP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Top menu button (TOP MENU) . . . . . . . . . . . . . . . . . . . . . . 11
Cursor buttons (3, 4, 2, 1)/Enter button (ENTER) . . . . 11
ON SCREEN button (ON SCREEN) . . . . . . . . . . . . . . . . . . . 20
Play mode button (PLAY MODE) . . . . . . . . . . . . . . . . . . . . . 16
Subtitle button (SUBTITLE) . . . . . . . . . . . . . . . . . . . . . . . . . 15
Repeat mode button (REPEAT) . . . . . . . . . . . . . . . . . . . . . . 18
A-B repeat button (A-B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Skip buttons (:, 9 SKIP) . . . . . . . . . . . . . . . . . . . . . . . 13
Cancel button (CANCEL) . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Marker button (MARKER) . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Page button (PAGE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Menu button (MENU) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Return button (RETURN) . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Angle button (ANGLE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Audio button (AUDIO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Headphone and Speaker V.S.S. buttons
(HP-V.S.S./SP-V.S.S.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Q Slow/Search buttons (6, 5 SLOW/SEARCH) . . . . . . . 13
Basic play
1
3 2
DVD AUDIO / VIDEO PLAYER
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
DVD-S1200
GROUP
VIDEO OFF
AUDIO/VIDEO
STANDBY
LEVEL
PHONES
1
STANDBY
/ON
0
10
4;∫
1
POWER
OPEN/CLOSE
Í/ I
1
2
3
4
5
6
7
8
0
S10
SET UP
MARKER
VIDEO OFF GROUP
The disc tray closes and play begins.
PAGE
TOP MENU
TOP MENU
3
4
Numeric
buttons
CANCEL
9
2
2
MENU
º To stop play
MENU
Cursor
buttons/
ENTER
Press [ê/I POWER] to turn on the
unit.
Press [OPEN/CLOSE] to open the disc
tray.
Place the disc on the disc tray.
Press [1] (PLAY).
Press [º] (á page 12, Resume function).
ENTER
ON SCREEN
RETURN
º To pause play [A]
RETURN
PLAY MODE SUBTITLE
REPEAT
A-B
SKIP
AUDIO
ANGLE
Press [;] during play.
Press [1] (PLAY) to restart play.
HP-V.S.S. SP-V.S.S.
SLOW/SEARCH
:, 9
STOP
2
4
PLAY
DVD
∫
;
1
PAUSE
V756260
Playing CD-R and CD-RW
This unit can play CD-DA (digital audio) and video CD format
audio CD-R and CD-RW that have been finalized¤ upon
completion of recording.
It may not be able to play some CD-R or CD-RW due to the
condition of the recording.
¤ Finalizing is a process that enables CD-R/CD-RW players to
play audio CD-R and CD-RW.
POWER
Í/ I
OPEN/CLOSE
Open
3
Label must face upward
(With double-sided discs,load
so the label for the side you
want to play is facing up.)
Basic operations
NATURAL SOUND
[DVD-A] [DVD-V] [VCD] [CD]
Note
³If “” appears on the television
The operation is prohibited by the unit or disc.
³The disc continues to rotate while the menu is displayed even after
you finish playing an item. Press [º] when you finish to preserve the
unit’s motor and your television screen.
³Volume may be lower when playing DVDs than when playing other
discs or during television broadcasts.
If you turn the volume up on the television or amplifier, ensure you
reduce the volume again before playing other sources so that a
sudden increase in output does not occur.
º Auto standby
The unit switches to the standby mode after about 30 minutes in the
stop mode.
4
Reading
Close
PLAY
When a menu screen appears on the
television
[DVD-A] [DVD-V] [VCD]
Unit’s display
(e.g. DVD-Video is loaded)
TITLE
Remote control only
Press the numeric buttons to select an
item.
CHAP
DVD
VIDEO
A
PAUSE
TITLE
To select a 2-digit number
Example: To select item 23, press [S10], then [2] and [3].
³When playing DVDs, you can also use the cursor buttons [3, 4,
2, 1] to select items. Press [ENTER] to confirm your selection.
Play of the selected item now begins.
CHAP
DVD
VIDEO
B
Title
The disc’s
top menu
Menu
Title
Menu
MENU
TOP MENU
Title
Menu
Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
[9] or [5/9]: Shows the next menu.
[:] or [:/6]: Shows the previous menu.
[RETURN]: Shows the menu screen. [VCD]
[TOP MENU]: Shows the first menu screen. [DVD-A] [DVD-V]
[MENU]: Shows the menu screen. [DVD-V]
]B\ DVD menus
DVD-Video can have several menus. The menu displayed when you
press [TOP MENU] may be different from the menu displayed when
you press [MENU].
11
Basic play
[DVD-A] [DVD-V] [VCD] [CD]
A
»
AUDIO/VIDEO
POWER
OPEN/CLOSE
Í/ I
1
2
3
5
6
7
4
Numeric
buttons
8
CANCEL
9
0
MARKER
VIDEO OFF GROUP
PAGE
TOP MENU
MENU
MENU
ENTER
ON SCREEN
RETURN
Basic operations
PLAY MODE SUBTITLE
A-B
SKIP
STOP
∫
DVD
V756260
The position you stopped play at is recorded by the unit when “!” is
flashing on the unit’s display.
While “!” is flashing on the unit’s display, press [1] (PLAY) to start
play from where you stopped it.
S10
SET UP
REPEAT
Resume function
AUDIO
ANGLE
If you are playing DVD-Video, the illustrated message also appears.
Press [1] (PLAY) while the message is displayed and the beginning
portions of each chapter up to the current one are played. Full play
resumes from the point where you stopped play.
(This feature works only within a title.)
If you do not press [1] (PLAY), the message disappears and play
starts from where you stopped it.
HP-V.S.S. SP-V.S.S.
SLOW/SEARCH
PAUSE
PLAY
1
To cancel
Press [º] until “!” disappears from the unit’s display.
Note
³The resume function does not work if the disc’s play time is not
displayed.
³The position is cleared when the disc tray is opened.
A
B
»
DVD
VIDEO
Press PLAY to Chapter Review
Starting play from a selected title
or track
Remote control only
While stopped
Press the numeric buttons.
To select a 2-digit number
Example: To select track 23, press [S10], then [2] and [3].
B
Play starts from the selected title/track.
1
2
3
4
5
6
7
8
9
0
S10
e.g. Video CD
TRACK
V CD
Note
³This may not work with some discs.
³When playing DVD-Audio and you want to start play from a track in
a different group, select the group first (á page 14).
For your reference
The numeric buttons also work during play if the disc is a
DVD-Audio, Karaoke DVD, Video CD, or CD.
If the Video CD has playback control (á page 29)
Cancel menu play first.
1. Press [º] during play until “PBC Play” is cleared from the unit’s
display.
2. Press the numeric buttons to select a track to start play.
To return to menu play, press [º] and press [MENU].
12
Basic play
A
»
NATURAL SOUND
DVD AUDIO / VIDEO PLAYER
[DVD-A] [DVD-V] [VCD] [CD]
GROUP
VIDEO OFF
AUDIO/VIDEO
STANDBY
LEVEL
PHONES
During play or while paused
STANDBY
/ON
0
Skipping chapters or tracks
DVD-S1200
10
Press [:] or [9].
Press ["] or [#] on the main unit.
1 ;
Each press increases the number of skips.
B
»
Frame-by-frame viewing
[DVD-A] [DVD-V] [VCD]
AUDIO/VIDEO
POWER
OPEN/CLOSE
Í/ I
2
3
4
5
6
7
8
9
0
S10
While paused
Press the cursor buttons [2] or [1].
CANCEL
SET UP
VIDEO OFF GROUP
PAGE
TOP MENU
Cursor
buttons
The frame changes each time the cursor buttons are pressed.
MARKER
³The frames change in succession if you press and hold [2] or [1].
³Pressing [;] also activates forward frame-by-frame.
MENU
ENTER
ON SCREEN
RETURN
PLAY MODE SUBTITLE
REPEAT
A-B
SKIP
:, 9
Basic operations
Remote control only
1
AUDIO
C
»
ANGLE
SLOW/SEARCH
6, 5
STOP
Fast forward and rewind–SEARCH
HP-V.S.S. SP-V.S.S.
PAUSE
PLAY
DVD
V756260
;
1
[DVD-A] [DVD-V] [VCD] [CD]
During play
Press [6] or [5].
Press and hold ["] or [#] on the main unit.
A
For your reference
Audio will be heard during search for most discs. You can turn this
audio off for some kinds of discs if you want to (á page 24, Audio–
Audio during Search).
SKIP
or
D
»
[DVD-A] [DVD-V] [VCD]
Play position
twice
once
once
Slow-motion play
twice
While paused
Press [6] or [5].
Chapter/track
Chapter/track
[:]
[:/6]
B
C
SLOW/SEARCH
Chapter/track
[9 ]
[5/9]
Press and hold ["] or [#] on the main unit.
Notes
³The speed of search and slow-motion increases up to
5 steps.
³Press [1] (PLAY) to restart play.
³You cannot move backwards with Video CD during frameby-frame and slow-motion.
³Frame-by-frame and slow motion only work on the moving
picture parts of DVD-Audio.
³["], [2] or [6]: Backward
[#], [1] or [5]: Forward
or
When playing Video CDs with playback control
Pressing buttons to perform skip, search or slow-motion may
take you to a menu screen.
D
SLOW/SEARCH
or
13
VIDEO OFF
NATURAL SOUND
DVD AUDIO / VIDEO PLAYER
A
»
DVD-S1200
GROUP
VIDEO OFF
AUDIO/ VIDEO
STANDBY
LEVEL
PHONES
STANDBY
/ON
0
Basic play
GROUP
10
1
Selecting still pictures–Page Skip
[DVD-A]
Remote control only
Some DVD-Audio include still pictures that you can change with the
following operation.
During play
Press [PAGE].
The page changes each time you press the button.
B
»
[DVD-A]
The tracks on DVD-Audio are divided into groups. How these groups
are played differs with the disc so read the instructions that came with
the disc for further details.
AUDIO/VIDEO
POWER
OPEN/CLOSE
Í/ I
Basic operations
Numeric
buttons
1
2
3
5
6
7
9
0
S10
1
8
CANCEL
MARKER
VIDEO OFF GROUP
VIDEO OFF
1
2
PAGE
PAGE
TOP MENU
2·3
MENU
3
ENTER
ON SCREEN
RETURN
PLAY MODE SUBTITLE
REPEAT
A-B
SKIP
STOP
DVD
V756260
A
4
CANCEL
SET UP
AUDIO
ANGLE
HP-V.S.S. SP-V.S.S.
The group and track icons are displayed.
Press the cursor buttons
select the group number
[ENTER].
Press the cursor buttons
select the track number
[ENTER].
[3, 4] to
and press
[3, 4] to
and press
PLAY
1
³You can also select groups with the remote control’s numeric buttons or [GROUP].
Press [1] (PLAY) when the required group is selected to start play
of that group.
³Selection may not be allowed in some situations.
e.g. Page 1
PAGE
Press [GROUP].
The selected group and track begin to play.
SLOW/SEARCH
PAUSE
Selecting groups to play
Playing all the groups in succession (á page 17)
Playing bonus groups
PAGE 1
B
GROUP
GROUP
or
G
1
Some discs contain bonus groups. To enjoy these groups you may
have to enter a password.
1. While stopped press [GROUP].
2. Press the cursor buttons [3, 4] to select the bonus group and
press [ENTER] or [1] (PLAY).
3. Enter the 4-digit password with the remote control’s numeric buttons and press [ENTER].
³See the disc’s jacket for the password.
4. Press the cursor buttons [3, 4] to select a track and press
[ENTER] to start play.
³Some discs will show a menu screen for you to enter your password. Follow the instructions on the screen.
³The bonus group can be played as many times as you like after the
password has been entered until the disc is removed from the unit.
T
1
Note
If you enter the wrong password, the previous screen will be displayed. Start again from the beginning. You can erase it by pressing
[CANCEL].
C
VIDEO OFF
VIDEO OFF
or
C
»
To enjoy even higher quality
sound–VIDEO OFF
[DVD-A] [DVD-V] [VCD] [CD]
You can enjoy higher quality audio by stopping the video signal.
Press [VIDEO OFF].
³The light above the button on the main unit lights.
³VIDEO OFF is canceled if you press the button again or turn the unit
off. The light goes out.
14
Note
Video signals are output while the disc is stopped and when operations such as searching are performed. The television can appear
unusual while video signals are not being output.
A
»
Remote control only
You can mark specific points on a disc to return to later. This feature
only works if the elapsed playing time of the disc is shown on the
unit’s display. All the markers are cleared when the unit is turned off,
or the disc tray is opened.
AUDIO/VIDEO
POWER
OPEN/CLOSE
Í/ I
2
3
5
6
7
9
0
MARKER
1·2
PAGE
TOP MENU
Press [MARKER].
The marker icon appears.
Press [MARKER] at the point you
want to mark.
To select another marker, press the cursor buttons [2, 1].
ENTER
ON SCREEN
RETURN
REPEAT
A-B
AUDIO
ANGLE
ANGLE
AUDIO
HP-V.S.S. SP-V.S.S.
MARKER
1
To play from a marked position
Press the cursor buttons [2, 1] to select a marker number and press
[ENTER].
To clear a marker
Press the cursor buttons [2, 1] to select a marker number and press
[CANCEL].
Changing soundtracks,
subtitle languages and
angles
✱✱✱✱✱
2
MARKER
1 ✱✱✱✱
B
1
2
MENU
PLAY MODE SUBTITLE
A
CANCEL
S10
VIDEO OFF GROUP
SUBTITLE
8
CANCEL
SET UP
Cursor
buttons
4
Remote control only
Some DVDs have multiple soundtracks, subtitle languages and camera angles, and you can change these during play.
B
»
AUDIO
Soundtracks
[DVD-A] [DVD-V]
During play
Press [AUDIO].
DVD-Audio
DVD-Video
Î Digital
1 ENG 3/2.1 ch
1
LPCM
1 192k24b 2ch
Soundtrack selected
Soundtrack playing
Indicates that a multichannel soundtrack
can be down-mixed.
e.g. DVD-Video
TITLE
CHAP
Lights when a multichannel soundtrack is
playing.
D.MIX
MLT.CH
DVD
VIDEO
The number changes each time you press the button.
³When playing DVD-Audio (other than moving picture sections), play
restarts from the beginning of the current track when you change
the audio.
³Even if a second soundtrack isn’t recorded on a DVD-Audio, two
soundtrack numbers will normally be shown when you press
[AUDIO]. The soundtrack currently playing is number 1.
³You can also use this button to turn the vocals on and off on karaoke discs. Read the disc’s instructions for details.
C
»
Advanced operations
Numeric
buttons
1
Marking places to play
again–MARKER
Subtitles
[DVD-A] [DVD-V]
During play
Press [SUBTITLE].
The number changes each time you press the button.
C
SUBTITLE
To clear/display the subtitles
1. Press [SUBTITLE].
2. Press the cursor buttons [1].
3. Press the cursor buttons [3, 4] to select “ON” or “OFF”.
DVD-Video
ON
1 ENG
ON
2 FRA
D
»
Angles
[DVD-A] [DVD-V]
During play
Press [ANGLE].
The number changes each time you press the button.
I love you
Je t’aime
Subtitle language number
D
ANGLE
1
Angle number
2
Notes regarding soundtracks, subtitle languages
and angles
³You can also use the cursor buttons [3, 4] or the numeric buttons to change the soundtracks, subtitle languages and
angles.
³Some discs allow changes to soundtracks, subtitle languages
and angles only by using the disc’s menus.
³Soundtrack and subtitle languages can be set before play
(á page 24, Disc–Audio and Subtitle).
³“–” or “– –” is displayed instead of the language number in circumstances such as when no language is recorded on the disc.
³Some discs allow you to set angles before multi-angle scenes
are played. Read the instructions that come with the DVD.
³In some cases, the subtitle language is not changed to the
selected one immediately.
15
Changing the play sequence
Remote control only
AUDIO/VIDEO
POWER
OPEN/CLOSE
Program play
Í/ I
Numeric
buttons
1
2
3
5
6
7
4
[DVD-A] [VCD] [CD]
You can select up to 32 tracks to play in the order you choose.
8
CANCEL
9
CANCEL
S10
0
SET UP
VIDEO OFF GROUP
PAGE
TOP MENU
2·3·4
ENTER
RETURN
PLAY MODE SUBTITLE
REPEAT
A-B
AUDIO
2
3
ANGLE
HP-V.S.S. SP-V.S.S.
SKIP
SLOW/SEARCH
6, 5
STOP
PAUSE
PLAY
5
DVD
V756260
Advanced operations
1 PLAY MODE
G
T
4
Time
Play
1
6∫
15
SELECT
Total Time
RETURN
e.g. DVD-Audio
PGM
DVD
GROUP
[DVD-Audio\only]
Press the cursor buttons [3, 4] to
select a group and press [ENTER].
0:00
0 Press PLAY to start
TRACK
5
AUDIO
Press the cursor buttons [3, 4] to
select a track and press [ENTER].
Each time you press the cursor buttons,
1()2( - - - - - - - )ALL
^----------------------------------------J
³Repeat steps 2, 3 and 4 to program other tracks.
³You can also select a group or track with the numeric
buttons.
³“Total Time” tells you the total time of the programmed
tracks.
³All the tracks on a disc are selected when you select “ALL”
(all the tracks in the selected group with DVD-Audio).
Clear
Clear all
ENTER
Press [ENTER].
³You can program tracks from different groups.
PLAY MODE Choose a group and track, then press ENTER.
No
While stopped
Press [PLAY MODE] until the program
play screen appears.
MENU
ON SCREEN
1
1
MARKER
Press [1] (PLAY).
Play now begins in the programmed sequence.
2
ENTER
PLAY MODE Choose a group and track, then press ENTER.
6∫
No
G
1
1
T
Time
Play
15
Clear
To add or change tracks
1. Press the cursor buttons [3, 4] to select an available item.
2. Repeat steps 2–4 to make the changes.
Clear all
To move to the page before or after the one shown
Press [6] or [5].
SELECT
Total Time
ENTER
3·4
RETURN
To clear the programmed tracks one by one
Press the cursor buttons to select the item number (No) and press
[CANCEL]. Alternatively you can select “Clear” and press [ENTER].
0:00
0 Press PLAY to start
PLAY MODE Choose a group and track, then press ENTER.
6∫
15
No
G
T
Time
1
1
5
2:02
Play
2
Clear
Clear all
To exit the program mode
Press [PLAY MODE] while stopped until the program play screen disappears.
³The program is retained in memory.
SELECT
Total Time
ENTER
ENTER
PGM
DVD
GROUP
16
2:02
0 Press PLAY to start
Note
If you select bonus groups on DVD-Audio during program play, you
will have to enter a 4-digit password (á page 14).
TRACK
AUDIO
Group No.
5
RETURN
PLAY
To clear the whole program
Press the cursor buttons [3, 4, 2, 1] to select “Clear all” and press
[ENTER].
The whole program is also cleared when the unit is turned off, or the
disc tray is opened.
Track No.
Program No.
Changing the play sequence
Remote control only
AUDIO/VIDEO
A
»
OPEN/CLOSE
Í/ I
Numeric
buttons
1
2
3
5
6
7
4
8
CANCEL
9
0
CANCEL
S10
SET UP
MARKER
VIDEO OFF GROUP
PAGE
TOP MENU
2
ENTER
1·1
RETURN
PLAY MODE SUBTITLE
REPEAT
A-B
AUDIO
ANGLE
HP-V.S.S. SP-V.S.S.
SKIP
SLOW/SEARCH
STOP
PAUSE
2·3
PLAY
DVD
V756260
A
1
PLAY MODE
[DVD-A]
The unit plays the tracks in all the groups on a disc.
1
All Group Playback
While stopped
Press [PLAY MODE] until the all
group play screen appears.
MENU
ON SCREEN
All group play
2
Press [1] (PLAY).
B
»
Random play
[DVD-A] [VCD] [CD]
The unit plays the tracks on a disc in random order.
Press PLAY to start
While stopped
Press [PLAY MODE] until the random
play screen appears.
[DVD-Audio\only]
Press the cursor buttons [2, 1] to
select a group and press [ENTER].
2
B
³You can select more than one group.
³You can also select groups with the numeric buttons.
PLAY
!
e.g. DVD-Audio (three groups)
PLAY MODE
1
Random Playback
Choose a group or groups
All
1
2
3
SELECT
ENTER
RETURN
0 Press PLAY to start
Press [1] (PLAY).
Play now begins in random order.
Advanced operations
POWER
To clear a group
[DVD-Audio\only]
1. Press the cursor buttons [2, 1] to select the group you want to
clear.
2. Press [CANCEL] or [ENTER].
³Groups can also be erased by entering the group number with the
numeric buttons.
To exit random mode
Press [PLAY MODE] while stopped until the random play screen disappears.
RND
DVD
Note
If you select bonus groups on DVD-Audio during random play, you
will have to enter a 4-digit password (á page 14).
AUDIO
2
Random Playback
Choose a group or groups
ALL
1
¢
2
3
SELECT
ENTER
ENTER
RETURN
0 Press PLAY to start
RND
DVD
AUDIO
3
PLAY
17
Repeat play
[DVD-A] [DVD-V] [VCD] [CD]
Remote control only
AUDIO/VIDEO
POWER
OPEN/CLOSE
Í/ I
Numeric
buttons
1
2
3
4
5
6
7
8
9
0
S10
SET UP
VIDEO OFF GROUP
A
»
CANCEL
During play
MARKER
Press [REPEAT].
The display changes as illustrated.
³DVD-Audio/CD/Video CD
Track (T)__-)Entire disc (A)__-)OFF
e
or Whole group (G)¤
|
l
(DVD-Audio only)
|
{------------------------------------------------------------------ }
¤
When playing DVD-Audio, in All group, Program, or Random
play modes, “A” is displayed instead of “G”.
³DVD-Video
Chapter (C)>Title (T)>OFF
^-----------------------------------------}
PAGE
TOP MENU
MENU
MENU
ENTER
ON SCREEN
RETURN
PLAY MODE SUBTITLE
REPEAT
REPEAT
A-B
AUDIO
ANGLE
HP-V.S.S. SP-V.S.S.
SKIP
1·2
SLOW/SEARCH
STOP
PAUSE
PLAY
DVD
V756260
Advanced operations
∫
A
Repeat play
1
If the Video CD has playback control
Cancel menu play first.
1. Press [º] during play until “PBC Play” is cleared from the unit’s
display.
2. Press the numeric buttons to select a track to start play.
3. Press [REPEAT] (á above).
To return to menu play, press [º] and press [MENU].
REPEAT
T
Note
³Repeat play may not work as desired with some DVDs.
³Repeat play does not work if the disc’s elapsed play time is not
shown on the unit’s display.
³There is no mode for repeating the whole DVD-Video.
C
º To repeat only your favorite tracks
A
G
[DVD-A] [VCD] [CD]
1. Program the tracks you want (á page 16).
2. Press [1] (PLAY). Play will start.
3. Press [REPEAT] to display “T” or “A”.
T
OFF
OFF
B
»
DVD
VIDEO
A-B repeat play
You can repeat a section between points A and B within a title or
track.
1
B
1
During play
Press [A-B] at the starting point (A).
A-B
2
A
Press [A-B] at the finishing point (B).
To cancel
Press [A-B] until “ ✱ ✱ ” is displayed.
2
18
A-B
A- B
AB
DVD
VIDEO
Note
³A-B repeat play does not work if the DVD’s elapsed play time is not
shown on the unit’s display.
³Some subtitles recorded around point A or B may fail to appear.
³The unit automatically determines the end of a title/track as point B
when the end of the title/track is reached.
Increasing your enjoyment of
movies and music
NATURAL SOUND
DVD AUDIO / VIDEO PLAYER
A
»
DVD-S1200
GROUP
VIDEO OFF
AUDIO/VIDEO
STANDBY
LEVEL
PHONES
STANDBY
/ON
0
10
Enjoying virtual surround effects
with 2 speakers or headphones
(VIRTUAL SURROUND (V.S.S.))
[DVD-V] [VCD]
LEVEL
SP-V.S.S.: Dolby Digital, DTS, MPEG, LPCM, 2-channel or over
only
HP-V.S.S.: Dolby Digital, MPEG, LPCM, 2-channel or over only
AUDIO/VIDEO
POWER
OPEN/CLOSE
Í/ I
1
2
3
5
6
7
Remote control only
Use VIRTUAL SURROUND (V.S.S.) (Virtual Surround Sound) to
enjoy a surround-like effect if you are using two main speakers or
headphones.
If you are playing a disc with surround effects recorded on it, the effect is broadened and sound seems to come from virtual speakers on
either side.
4
8
CANCEL
0
S10
Headphone plug type:
6.3 mm stereo
MARKER
VIDEO OFF GROUP
PAGE
TOP MENU
MENU
Press [ SP-V.S.S. ] or [ HP-V.S.S. ].
ENTER
ON SCREEN
RETURN
PLAY MODE SUBTITLE
HP.-V.S.S.
REPEAT
SP.-V.S.S.
A
HP-V.S.S.
A-B
SKIP
AUDIO
Each time you press the button:
SP 1/HP 1: Natural effect_----------)SP 2/HP 2: Emphasized effect
^-=SP OFF/HP OFF: Cancel (Factory preset)(--b
ANGLE
HP-V.S.S. SP-V.S.S.
SLOW/SEARCH
SP-V.S.S.
SP 1
TITLE
CHAP
SP
V.S.S.
DVD
VIDEO
Note
³Virtual Surround will not work, or will have less effect, with some
discs, even if you select “1” or “2”.
³Turn off the surround sound effects on the equipment you have connected when using this effect.
³Turn Virtual Surround off if it causes distortion.
³Output from this unit will be in stereo (two channels) when V.S.S. is
on.
B Using headphones
»
Optimum seating position
Speaker
A
Speaker
3 to 4 times distance A
<When using the
television’s speakers>
Distance Au
Television’s width
Advanced operations
9
SET UP
1
Set [LEVEL] to “0” and connect the
headphones (not included).
2
Adjust headphone
[LEVEL].
volume
with
Seating position
B
PHONES
1
LEVEL
Note
Avoid listening for prolonged periods of time to prevent hearing
damage.
1
2
2
0
PHONES
10
LEVEL
0
10
19
Using GUI screens
[DVD-A] [DVD-V] [VCD] [CD]
Remote control only
AUDIO/VIDEO
POWER
GUI (Graphical User Interface) screens are menus that contain information about the disc or unit. These menus allow you to perform operations by changing this information.
OPEN/CLOSE
Í/ I
Numeric
buttons
1
2
3
5
6
7
4
8
CANCEL
9
0
S10
SET UP
Common procedures
MARKER
VIDEO OFF GROUP
PAGE
TOP MENU
ON SCREEN
RETURN
PLAY MODE SUBTITLE
REPEAT
A-B
SKIP
STOP
AUDIO
RETURN
ANGLE
HP-V.S.S. SP-V.S.S.
SLOW/SEARCH
PAUSE
PLAY
DVD
V756260
2
Advanced operations
Press [ON SCREEN].
Each time you press the button:
[>GUI screen for disc information (a)
l
;
l GUI screen for unit information (b)
l
;
l Shuttle screen (c)
l
;
{--- Original display (d)
³The screens depend on the disc contents.
ENTER
ENTER
1
1
2·3·4
MENU
[GUI\screen\for\unit\information\only]
While the leftmost icon is highlighted
1
Press the cursor buttons [3, 4] to select the menu.
ON SCREEN
Each time you press the cursor buttons:
[>Play menu (e)
l
;:
l Display menu (f)
l
;:
l Audio menu (g)
l
;:
{--.Video menu (h)
Example: DVD-Video
a
T
2
b
c
C
1 : 46 : 50
2
AB
OFF
–––
Î Digital
1 ENG 3/2.1 ch
ON
1 ENG
1
1 2 3 ✱✱
r100
j100
d
2
e
f
g
h
AB
OFF
OFF
SP OFF
–––
1 2 3 ✱✱
3
Press the cursor buttons [2, 1] to select the item.
4
Press the cursor buttons [3, 4] to select the setting.
³Items with “3” or “4” above and below can be changed by
[3,4].
³Press [ENTER] if the setting does not change after pressing
the cursor buttons [3,4].
³Some items require different operations. Read the explanations on the following pages.
BRIGHT
For your reference
³Some functions cannot be accessed from the stop mode (e.g.
changing the soundtrack language).
³When numbers are displayed (e.g. title No.), the numeric buttons
are also effective for setting. When numbers are entered with the
numeric buttons, press [ENTER] to register the setting.
OFF
N
To clear the GUI screen
Press [RETURN] until the menus disappear.
3
º To change the position of the GUI screens
4
You can lower the position of the GUI screens if they are cut off for
some reason. There are 5 positions to choose from.
1. Press the cursor buttons [2, 1] to select the rightmost icon.
2. Press the cursor buttons [3,4] to move the GUI screen.
T
2
20
Using GUI screens
A
A
»
[DVD-V]
T
2
C
2
d
1 : 46 : 50
e
f
Î Digital
1 ENG 3/2.1 ch
hi
j
ON
1 ENG
1
Icon
[DVD-A]
b
k
G T
2
2
1
1 : 46 : 50
LPCM
192k24b 2ch
T
C
2
--
--:--:--
[VCD]
T
2
00:05
Vocal
1 ✱
OFF
l
m
L R
PBC
ON
n
-- ✱
1
r100
p
[DVD-V] Title number
b
[DVD-A] Group number
c
[DVD-V] Chapter number
d
[DVD-A] [DVD-V]
Time (select a position to start play by specifying a time
with the numbered buttons)
[DVD-A] [VCD] [CD] Track number
e
[DVD-A] [DVD-V]
Audio number
(See = for language abbreviations.)
f
Audio signal type (See > for details.)
g
Karaoke vocal on/off (Karaoke DVD only)
Solo: OFF or ON
Duet: OFF, V1iV2, V1 or V2
h
[DVD-A] [DVD-V]
Subtitle number
(See = for language abbreviations.)
i
Subtitle on/off
j
[DVD-A] [DVD-V] Angle number
k
[DVD-A]
Still picture number
Selected picture is shown during play.
l
[VCD] Audio mode LR()L()R
^---------------------J
m
[VCD] (with playback control only)
Menu play
Indicates whether menu play (playback control) is on or off.
o
j100
q
a
[DVD-A] [VCD] [CD]
Changing the time display
Track elapsed time !# Track remaining time
^-------# Disc remaining time !-------J
B
o
Content
Page
1
g
[DVD-V] (Karaoke DVD)
Screen for disc information
q
ON()OFF
Advanced operations
a c
= Audio/Subtitle language
ENG:
FRA:
DEU:
ITA:
ESP:
NLD:
English
French
German
Italian
Spanish
Dutch
SVE: Swedish
NOR: Norwegian
DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI:
KOR:
MAL:
VIE:
THA:
¢:
Chinese
Korean
Malay
Vietnamese
Thai
Others
> Signal type/data
LPCM/PPCM/ë Digital/DTS/MPEG: Signal type
k (kHz):
Sampling frequency
b (bit):
Number of bits
ch (channel): Number of channels
Example:
3/2 .1ch
.1: Subwoofer signal
(not displayed if there is no subwoofer signal)
.0: No rear
.1: Mono rear
.2: Stereo rear (left/right)
.1: Center
.2: Main leftiMain right
.3: Main leftiMain rightiCenter
B
»
Shuttle screen
Icon
Content
n
Pause
o
Slow-motion play
p
Play
q
Search
E: Backward [DVD-A] [DVD-V]
D: Forward [DVD-A] [DVD-V] [VCD]
6: Backward
5: Forward
³There are five speeds for both backward and forward slow-motion
and search.
³The numbers on either side of the shuttle screen indicate the maximum speeds of the search.
21
Using GUI screens
A
a
b
c
d
AB
OFF
–––
1 2 3 ✱✱
Screen for unit information
A
»
Play menu
Icon
B
e
U1
f
g
0
k
Advanced operations
U2
0
h
i
0
0
l
m
0
A-B repeat (á page 18)
[ENTER] (start point) á [ENTER] (finish point)
To cancel: [ENTER]
b
Repeat play (á page 18)
[DVD-V]
C (Chapter),.T (Title),.OFF
^-------------------------------------J
[DVD-A] [VCD] [CD] T (Track),.A (All)/G (Group),.OFF
^-------------------------------------------------J
c
[DVD-A] [VCD] [CD]
Play mode display
---: Off
PGM: Program play
ALL: All group play ([DVD-A])
j
0
0
d
0
B
»
RND: Random play
Marker: You can mark up to 5 positions to play again
(á page 15).
[ENTER] (The unit is now ready to accept markers.)
To mark a position:
[ENTER] (at the desired point)
To mark another position: [2, 1] á [ENTER]
To recall a marker:
[2, 1] á [ENTER]
To erase a marker:
[2, 1] á [CANCEL]
Video menu
Icon
Content
e
[DVD-A] [DVD-V] [VCD]
Digital picture mode
To select the picture mode: [3, 4]
N: Normal mode
S: Soft mode (Soft picture with fewer video artifacts)
F: Fine mode (Details are sharper)
C: Cinema mode (Picture for viewing movies)
U1, U2: User mode
To change U1 and U2
1. Select User Mode and press the cursor button [1].
2. Press the cursor buttons [3, 4] to select 1 or 2.
3. Press the cursor buttons [2, 1] to select the item
you want to change.
4. Press the cursor buttons [3, 4] to change the
setting.
f
U1
Contrast (j7 to i7)
Increases the contrast between white and black
parts of the pictures.
g
Brightness (0 to i15)
Brightens the picture.
h
Sharpness (j6 to i6)
Adjust the horizontal resolution of the picture.
i
Colour (j7 to i7)
Adjust the shade of the picture’s colour.
j
Gamma (0 to i5)
Increases the brightness of the center ranges to
improve detail and contrast in dark scenes.
k
22
Content
a
U2
3D-NR (0 to i4)
Reduces overall noise.
l
Block NR (0 to i3)
Smoothes block noise.
m
Mosquito NR (0 to i3)
Reduces the smudging that appears around
contrasting sections of the picture.
Note
The unit saves the settings you make with the user mode for each
disc so when you play a disc again and select a user mode, the same
settings are selected. Discs you play for the first time use the previous settings. The unit can save settings for up to 200 discs. The settings for a disc are not saved if you switch to normal, soft, fine, or
cinema mode before opening the disc tray or switching the unit to
standby.
Using GUI screens
n
o
SP OFF
B
A
»
Icon
OFF
p
q
OFF
BRIGHT
C
5
Audio menu
n
6
7
Content
[DVD-V] [VCD]
VIRTUAL SURROUND (V.S.S.) mode (á page 19)
SP()HP
³SP-V.S.S.
(Dolby Digital, DTS, MPEG, LPCM, 2-channel or over
only)
³HP-V.S.S.
(Dolby Digital, MPEG, LPCM, 2-channel or over only)
V.S.S. level (á page 19)
8
CANCEL
9
1
0
S10
SET UP
VIDEO OFF GROUP
PAGE
TOP MENU
2·3·4
o
MARKER
MENU
ENTER
ON SCREEN
RETURN
RETURN
PLAY MODE SUBTITLE
REPEAT
A-B
AUDIO
ANGLE
B
»
[DVD-V] (Dolby Digital/DTS, 3-channel or over only)
Dialogue Enhancer
ON()OFF
The volume of the dialogue from the center channel is
raised when you select “ON”.
Display menu
HP-V.S.S. SP-V.S.S.
Icon
SKIP
1
1()2()OFF
^----------------------J
Content
SLOW/SEARCH
p
[DVD-V] [VCD]
Bit-rate display
Displays the bit rate and type of picture (approximate
values)
During play: Shows the average bit rate of the video
being played
While paused: Shows the data volume of the frame
ON()OFF
q
Display dimmer:
Changes the brightness of the unit’s display.
BRIGHT()DIM()AUTO¤
^-------------------------------------------J
¤ The display dims and any indicators that were on turn off
during play. The display brightens and the indicators
light temporarily when you perform an operation.
SET UP
2
a
SETUP
Disc
A dio
English
C Changing settings
»
b
SETUP
Video
TV Aspect
TV Type
4:3 Pan&Scan
Standard (Direct V
c
SETUP
Speaker Setting Multi-channel
Digital Audio Output On (REMASTER Off)
SETUP
Remote control only
Change the settings to suit your preferences and to suit the unit to the
environment in which it is being used.
These settings are retained in memory until they are changed, even if
the unit is turned off.
Audio
d
Common procedures
See page 24 for menu and option details.
1
2
Display
3
e
SETUP
Advanced operations
A
Others
4
Press [SET UP] to show the menus.
The screen shows the Disc menu (a) first.
Press the cursor buttons [2, 1] to select the menu’s tab.
The screen changes to display the menu.
Disc (a)(--)Video (b)(--)Audio (c)
^---)Others (e)(-)Display (d)(---J
Press the cursor buttons [3, 4] to select the item you want to change and
press [ENTER].
Press the cursor buttons [3, 4] to select the option and press [ENTER].
The screen now shows the menu again.
3·4
ENTER
To return to the previous screen
Press [RETURN].
When you are finished
Press [SET UP].
23
Changing settings
Summary of settings
This chart shows the initial settings for this unit. See page 23 for details on menu operation.
³Underlined items are the factory presets.
³The menu and on-screen message language has been factory preset to English. You can change the language by going to “Menu Language” in
the Display menu.
Menus
Advanced operations
Disc
(á [Remarks]
page 25)
Items
Options
Audio [DVD-A] [DVD-V]
Choose the preferred audio language.
English
Spanish
French
Original
German Italian
Other ¢¢¢¢
Subtitle [DVD-A] [DVD-V]
Choose the preferred subtitle language.
Automatic
Italian
English
Spanish
French
German
Other ¢¢¢¢
Menus [DVD-A] [DVD-V]
Choose the preferred language for disc menus.
English
Spanish
French
German
Other ¢¢¢¢
Ratings [DVD-V]
Set a ratings level to limit DVD-Video play.
Setting ratings (When level 8 is selected)
8 No Limit: All DVD-Video can be played.
1 to 7: Prohibits play of DVD-Video with
corresponding ratings recorded on them.
0 Lock All: Prohibits play of all DVD-Video.
Italian
Changing ratings
(When level 0–7 is selected)
Unlock Player
Change Level
Change Password
Temporary Unlock
Video
[DVD-A]
[DVD-V]
[VCD]
Audio
TV Aspect
Choose the setting to suit your television and preference (á page 26).
4:3 Pan&Scan
4:3 Letterbox
16:9
TV Type
Change the setting to suit your television. (á page 26)
Standard(Direct View TV)
LCD Projector
AV 1 Output
Choose the video signal format to be output from the AV1 SCART
terminal.
Video
Still Mode (á [Remarks] page 25)
Specify the type of picture shown when paused.
Automatic
Field
Frame
NTSC Disc Output
Choose whether PAL 60 or NTSC signals are output during playback of
NTSC discs (á page 5).
PAL60: when connected to a PAL television.
NTSC: when connected to an NTSC
television.
Speaker Setting [DVD-A] [DVD-V]
Choose the settings to suit your audio system and the listening
environment (á page 27).
Multi-channel:
when 3 or more speakers are connected.
³Speaker presence and size
³Delay time
³Channel balance
CRT Projector
ProjectionTV
S-Video
RGB
2-channel:
when 2 speakers or an amplifier with a Dolby
Pro Logic decoder is connected.
24
Digital Audio Output [DVD-A] [DVD-V] [VCD] [CD]
Select whether to output digital signals or not. Select “Off” to enjoy highquality sound through analog connection.
On: Digital signals are output.
Off: Digital signals are not output.
PCM Down Conversion [DVD-A] [DVD-V]
Digital output of 96- or 88.2-kHz linear PCM signals (á page 28)
No
Yes
Dolby Digital [DVD-A] [DVD-V]
Digital output of Dolby Digital signals (á page 28)
Bitstream
PCM
DTS Digital Surround [DVD-A] [DVD-V]
Digital output of DTS Digital Surround signals (á page 28)
PCM
Bitstream
MPEG [DVD-A] [DVD-V]
Digital output of MPEG signals (á page 28)
PCM
Bitstream
D. Range Compression [DVD-A] [DVD-V] (Dolby Digital only)
Change the dynamic range for late night viewing.
Off
On
Audio during Search [DVD-A] [DVD-V] [VCD] (á [Remarks] page 25)
Choose whether to have sound during search.
On
Off
Menus
Display
Others
Items
Options
Menu Language
Choose the preferred language for these menus and the on-screen
messages.
English
Italiano
On-Screen Messages
Choose whether to show on-screen messages or not.
On
Off
Demo
A demonstration of the unit’s on-screen displays starts when you select
“On”. The demonstration stops when you press a button and the setting
reverts to “Off”.
Off
On
Français
Español
Deutsch
Remarks
ºDisc–Audio, Subtitle and Menus
Original:
The original language of each disc will be selected.
Other ¢¢¢¢: Input a code number with the numeric buttons (á see below).
Automatic:
If the language selected for “Audio” is not available, subtitles of that language will automatically appear if available on that disc.
³Some discs are designed to start in a certain language despite any changes you make here.
ºDisc–Ratings
³The password screen is shown if you choose levels 0 to 7 or if you choose “Ratings” when levels 0 to 7 have been selected (á page 28).
³Select “Level 0” to prevent play of discs that do not have ratings levels recorded on them.
Advanced operations
ºVideo–Still Mode
Automatic: The unit automatically selects field still or frame still.
Field:
Less blurred field stills are shown. Select if jittering occurs when “Automatic” is selected.
Frame:
Sharper frame stills are shown. Select if small text or fine patterns cannot be seen clearly when “Automatic” is selected.
ºAudio–Audio during Search
Select “Off” if sound is interrupted when playing Dolby Digital 5.1-channel and DTS bitstream signals.
Audio will be heard when playing some DVD-Audio despite the settings you make here.
Language code list
Abkhazian:
6566
Afar:
6565
Afrikaans:
6570
Albanian:
8381
Ameharic:
6577
Arabic:
6582
Armenian:
7289
Assamese:
6583
Aymara:
6588
Azerbaijani:
6590
Bashkir:
6665
Basque:
6985
Bengali; Bangla: 6678
Bhutani:
6890
Bihari:
6672
Breton:
6682
Bulgarian:
6671
Burmese:
7789
Byelorussian:
6669
Cambodian:
7577
Catalan:
6765
Chinese:
Corsican:
Croatian:
Czech:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
Greenlandic:
Guarani:
Gujarati:
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Hausa:
Hebrew:
Hindi:
Hungarian:
Icelandic:
Indonesian:
Interlingua:
Irish:
Italian:
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Korean:
Kurdish:
Laotian:
Latin:
Latvian, Lettish:
Lingala:
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
7678
Lithuanian:
Macedonian:
Malagasy:
Malay:
Malayalam:
Maltese:
Maori:
Marathi:
Moldavian:
Mongolian:
Nauru:
Nepali:
Norwegian:
Oriya:
Pashto, Pushto:
Persian:
Polish:
Portuguese:
Punjabi:
Quechua:
Rhaeto-Romance:
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8083
7065
8076
8084
8065
8185
8277
Romanian:
Russian:
Samoan:
Sanskrit:
Scots Gaelic:
Serbian:
Serbo-Croatian:
Shona:
Sindhi:
Singhalese:
Slovak:
Slovenian:
Somali:
Spanish:
Sundanese:
Swahili:
Swedish:
Tagalog:
Tajik:
Tamil:
Tatar:
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
Telugu:
Thai:
Tibetan:
Tigrinya:
Tonga:
Turkish:
Turkmen:
Twi:
Ukrainian:
Urdu:
Uzbek:
Vietnamese:
Volapük:
Welsh:
Wolof:
Xhosa:
Yiddish:
Yoruba:
Zulu:
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
25
Changing settings
Television settings
Change the settings to suit your television and your preference.
Refer also to Common Procedures (á page 23) and the Video section in Summary of settings (á page 24).
TV Aspect
4:3 Pan&Scan (Factory preset)
Select if you have a regular television and to view 16:9 software in the
pan and scan style.
16:9 software prohibited from being shown in the pan and scan style
will appear in the letterbox style despite the setting here.
Advanced operations
4:3 Letterbox
Select if you have a regular television and to view 16:9 software in the
letterbox style.
16:9
Select if you have a widescreen television.
For your reference
DVDs are recorded in a variety of aspect ratios and how these
appear depend on these settings, the on-screen menu settings, and
the television’s screen modes.
³When connected to a regular 4:3 aspect television, use these
settings.
³When connected to a widescreen 16:9 aspect television, use the
television’s screen modes.
TV Type
Standard (Direct View TV) (Factory preset)
Select if you have a standard television, widescreen television, widescreen plasma television, etc.
CRT Projector
Select if you have a DLP Projector or a CRT Projector.
LCD Projector
Select if you have an LCD Projector.
Projection TV
Select if you have a Projection TV.
The optimum settings for your television may differ.
26
Changing settings
Speaker setting
[DVD-A] [DVD-V]
Select either “2-channel” or “Multi-channel” to suit the speakers you
have connected. You can change the following settings when you
select “Multi-channel”.
OPEN/CLOSE
Í/ I
1
2
3
5
6
7
9
0
S10
4
A
»
8
CANCEL
SET UP
MARKER
VIDEO OFF GROUP
PAGE
TOP MENU
MENU
Cursor buttons/
ENTER
ENTER
ON SCREEN
RETURN
PLAY MODE SUBTITLE
Main (L)
AUDIO
ANGLE
Center
A
B
A
Main (R)
C
A
L
Exit
ms
0
R
dB
0
C
Exit
Test
dB
0
SW
dB
0
RS
SELECT
Test
signal
dB
0
LS
ENTER
RETURN
ms
0
Subwoofer
Rear
(L) A
(L) C
B
(R) C
(R) A
A
LS
No
LS
Large
Small
B
L
1. Use the cursor buttons [3, 4, 2, 1] to select the item and
press [ENTER].
2. Press the cursor buttons [3, 4] to select the setting and
press [ENTER].
Icon examples: Rear speaker (L)
Large: When the speaker supports low-frequency (under
100 Hz) reproduction.
Small: Select when the speaker does not support low-frequency
reproduction.
The size setting for the main speakers is automatically determined by
the setting for the subwoofer.
B
»
SETUP
R
C
a
b
SW
c
LS
RS
Center speaker
Difference
Setting
Approx. 50 cm
1.3 ms
Approx. 100 cm
2.6 ms
Approx. 150 cm
3.9 ms
Approx. 200 cm
5.3 ms
Rear speakers
Difference
Setting
Approx. 200 cm
5.3 ms
Approx. 400 cm
10.6 ms
Approx. 600 cm
15.9 ms
C
A
Speaker presence and size
Delay time
[DVD-V] (Dolby Digital, center and rear speakers only)
For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating
position. If you have to place the center or rear speakers closer to the
seating position, adjust the delay time to make up for the difference.
If distance = (from the center speaker) and ? (from the rear speakers) are the same as or greater than > (from the main speakers),
leave the delay time as “0”, the factory preset.
If either distance = or ? is less than >, find the difference in the
relevant table and change to the recommended setting.
Changing the delay time
1. Use the cursor buttons [3, 4, 2, 1] to select the delay time
box and press [ENTER].
2. Press the cursor buttons [3, 4] to adjust the delay time and
press [ENTER].
C
»
Advanced operations
AUDIO/VIDEO
POWER
Speaker balance
1. Use the cursor buttons [3, 4, 2, 1] to select “Test” and
press [ENTER].
A test signal is output from one speaker at a time, starting with the
main left speaker and proceeding clockwise.
MAIN (L)-)CENTER--)MAIN (R)
e
v
REAR (L)(----------------==REAR (R)
2. While listening to the test signal, press the cursor buttons
[3, 4] to adjust the volume of the center and rear speakers
so they are the same apparent volume as the main speakers
(s6 dB to r6 dB).
(The main speakers cannot be adjusted here.)
3. Press [ENTER].
The test signal stops.
Note
³Test signal is effective only when you made analog connection.
When you make digital connection, make adjustment using the test
tone on the amplifier.
³No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
When you are finished
Use the cursor buttons [3, 4, 2, 1] to select “Exit” and press
[ENTER].
Note
The unit may be unable to output as set here due to limitations imposed by the unit itself or the disc being played. (The FL display’s
“P.PCM” indicator lights or “D.MIX” indicator goes out in these
cases.)
27
Changing settings
Digital output
Entering a password
Refer also to “Common procedures” (á page 23) and the Audio menu
in “Summary of settings” (á page 24).
[DVD-V]
Refer also to “Common procedures” (á page 23) and the Disc menu
in “Summary of settings” (á page 24).
PCM Down Conversion
When setting ratings (When the level is 8)
[DVD-A] [DVD-V]
Select how to output the high-quality audio signals (sampling frequencies of 96 kHz and 88.2 kHz) on discs that do not have copyright
protection. Choose the settings to suit the equipment you have connected.
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numeric buttons and press
[ENTER].
SETUP
Setting
Equipment
(Able to handle
88.2 kHz or more)
Audio output
No¤1
Yes
Output as is
SELECT
Advanced operations
Yes
¤1
No
Down-sampled to
48 kHz or 44.1 kHz
The equipment cannot output signals of 88.2 kHz or more if the
setting is “No” and the equipment is unable to handle these signals.
Note
Signals are down-sampled to either 48 kHz or 44.1 kHz despite the
above settings if they have a sampling frequency of 176.4 kHz or
more or are copyright protected.
Dolby Digital
[DVD-A] [DVD-V]
Bitstream (Factory preset):
When you have connected a unit with a built-in Dolby Digital decoder.
PCM:
When you have connected a unit that doesn’t have a built-in Dolby
Digital decoder.¤2
DTS Digital Surround
[DVD-A] [DVD-V]
PCM (Factory preset):
When you have connected a unit that doesn’t have a built-in DTS
decoder.¤2
Bitstream:
When you have connected a unit with a built-in DTS decoder.
ENTER
[DVD-A] [DVD-V]
PCM (Factory preset):
When you have connected a unit that doesn’t have a built-in MPEG
decoder.¤2
Bitstream:
When you have connected a unit with a built-in MPEG decoder.
¤2
These changes to digital audio output must be made, otherwise bitstream signals the decoder cannot handle will be output. If these signals are output, “noise” will be output which
can cause harm to your ears and speakers.
28
Password
✱✱✱✱
RETURN
³If you enter a wrong number, press [CANCEL] to erase it before
you press [ENTER].
The lock symbol appears closed to show the rating is locked.
Do not forget your password.
2. Press [ENTER] to confirm the 4 digits.
Now, when you insert a DVD-Video that exceeds the ratings
limit you set, a message appears on the television.
Follow the on-screen instructions.
When changing ratings (When the level is 0 to 7)
The password screen is shown when you select “Ratings”.
1. Input your 4-digit password with the numeric buttons and press
[ENTER].
SETUP
Ratings
Unlock Player
Change Password
SELECT
ENTER
MPEG
Ratings
Enter a 4-digit password,
then press ENTER.
Change Level
Temporary Unlock
RETURN
2. Select the item with the cursor buttons [3,4] and press
[ENTER], and follow the on screen instructions.
Glossary
This is the digital form of multiple channel audio data (e.g., 5.1 channel) before it is decoded into its various channels.
Decoder
A decoder restores the coded signals on DVDs to normal. This is
called decoding.
Dolby Digital
This is a method of coding digital signals developed by Dolby Laboratories. Apart from stereo (2-channel) audio, these signals can also be
5.1-channel audio. A large amount of audio information can be recorded on one disc using this method.
Dolby Pro Logic
A surround system where a 4-channel audio track is recorded as
2 channels and then is restored to 4 channels for play. The surround
channel is monaural and can reproduce up to 7 kHz.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters around the
world. There is good separation between the channels, so realistic
sound effects are possible.
Dynamic range
Dynamic range is the difference between the lowest level of sound
that can be heard above the noise of the equipment and the highest
level of sound before distortion occurs.
Frame still and field still
A still is shown when you pause a moving picture. A frame still is
made up of two alternating fields, so the picture may appear blurred,
but overall quality is high.
A field still is not blurred, but it has only half the information of a frame
still so picture quality is lower.
Frames are the still pictures that go together to make a moving picture. There are about 30 frames shown each second.
One frame is made up of two fields. A regular television shows these
fields one after the other to create frames.
I/P/B
MPEG, the video compression standard adopted for use with DVDVideo, codes frames using these 3 picture types.
I: Intra coded picture (I-picture)
This is the standard picture and is a complete picture in itself.
This means it has the best picture quality and is the best to use
when adjusting the picture.
P: Predictive coded picture (P-picture)
This picture is calculated based on past I or P-pictures.
B: Bidirectionally-predictive coded picture (B-picture)
This picture is calculated by comparing past and future I and Ppictures so it has the lowest volume of information.
Linear PCM (pulse code modulation)
PCM is the usual digital method used for music CDs. DVDs have a
greater volume so they use linear PCM, which has a higher sampling
rate. Compressed PCM signals are called packed PCM (PPCM).
Optical digital audio cable
Electronic signals are converted to optical signals for output to the
amplifier. This reduces noise caused by electronic interference.
Pan&Scan/Letterbox
In general, DVD-Video are produced with the intention that they be
viewed on a widescreen television with an aspect ratio of 16:9. This
means you can view most material with the intended aspect ratio on a
widescreen television.
Material with this ratio will not fit onto a standard television with an
aspect ratio of 4:3. Two styles of picture, “Pan&Scan” and “Letterbox”, deal with this problem.
Pan&Scan: the sides are cut off so the picture fills the screen.
Letterbox:
black bands appear at the top and bottom of the
picture so the picture itself appears in an aspect ratio
of 16:9.
Playback control (PBC)
If a Video CD has “playback control” written on it or its jacket, it
means that particular scenes or information can be selected for viewing interactively with the television using the menu screen. This unit
can play Video CDs with playback control.
Using menus to control play of a Video CD is called “menu play” in
these operating instructions.
Sampling rate
This is the number of samples of sound taken per second during conversion to a digital signal. Sampling frequency is expressed in kilohertz (kHz). A high sampling frequency results in a sound close to the
original when played back.
Title/Chapter
DVD-Video are divided up into large sections, titles, and smaller sections, chapters. The numbers allocated to these sections are called
title numbers and chapter numbers.
Reference
Bitstream
Track
This is the smallest division on DVD-Audio, CD, and Video CD, and
usually equates to a single song.
Disc handling
Do not use irregularly shaped discs, such as heart-shaped.
(These can damage the unit.)
º If the surface is dirty
Wipe it with a damp cloth and then wipe dry.
Do not wipe with a circular motion; wipe straight outward from the
center.
º How to hold a disc
Do not touch the recorded surface.
º If the disc is brought from a cold to a warm
environment, moisture may form on the disc
Wipe with a soft, dry, lint-free cloth before using the disc.
º Handling precautions
³Do not write on the label side with a ball-point pen or other writing
instrument.
³Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.
³Do not attach labels or stickers to discs. (Do not use discs with exposed adhesive from tape or left over peeled-off stickers.)
³Do not use scratch-proof protectors or covers.
³Do not use discs printed with label printers available on the market.
º Do not place or store discs in the following
places
³Locations exposed to direct sunlight
³Humid or dusty locations
³Locations directly exposed to a heat vent or heating appliance
29
Troubleshooting guide
Before requesting service for this player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or
a minor adjustment on your part may eliminate the problem and restore proper operation.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, contact your authorized
YAMAHA dealer or service center for instructions.
Reference pages are shown as black circled numbers 6.
Power
No power.
³Insert the AC mains lead securely into the household mains socket. 7
The unit is automatically switched
to the standby mode.
³To conserve power, the unit automatically switches to the standby mode after approx.
30 minutes elapse in the stop mode (Auto standby). Turn the power back to ON.
Reference
Operation
No response when buttons
pressed.
³Some operations may be prohibited by the disc.
³The unit may not be operating properly due to lightning, static electricity or some other external
factor.
Reset procedure:
Press [STANDBY/ON] to switch the unit to the standby mode and then back to ON.
Alternatively, press [STANDBY/ON] to switch the unit to the standby mode, disconnect the AC
mains lead, and then reconnect it.
No operations can be performed
with the remote control.
³Check the batteries are installed correctly. 4
³The batteries are depleted: Replace them with new ones. 4
³Point the remote control at the remote control sensor and operate. 4
Play fails to start even when
[1] (PLAY) is pressed.
Play starts but then stops
immediately.
³Condensation has formed: Wait 1 to 2 hours for it to evaporate.
³This unit cannot play discs other than DVD-Audio, DVD-Video, Video CD and CD. 5
³You can only play DVD-Video if their region number is the same or includes the same region
number as the unit or if the DVD-Video is marked “ALL”. Confirm the region number for the unit on
the rear panel. 5
³The disc may be dirty and may require cleaning. M
³Ensure that the disc is installed with the label of the side to be played facing upwards. ;
Alternative languages fail to be
selected.
³An alternative language is not selected with discs which do not contain more than one language.
³In the case of some discs, the alternative language cannot be selected with [AUDIO] or
[SUBTITLE]. Try selecting it from the disc’s menu if one is available. ;
No subtitles.
³Subtitles appear only with discs that contain them.
³Subtitles are cleared from the television. Display the subtitles. ?
³Some subtitles recorded around point A or B may fail to appear. B
Soundtrack and/or subtitle
language is not the one selected
with the SET UP menus.
³The language is not recorded on the disc.
Angle cannot be changed.
³This function is dependent on software availability. Even if a disc has a number of angles
recorded, these angles may be recorded for specific scenes only. ?
You have forgotten your ratings
password.
Reset all the settings to Factory
Preset.
³While stopped, press and hold ["] and [;] on the unit and then also press and hold [<] on
the unit until “Initialized” disappears from the television. Turn the unit off and on again.
All settings will return to the default values.
Sound
No sound.
Distorted sound.
30
³Check the connections. 7 8 9
³Check the volume on the equipment you have connected.
³Ensure that the input settings for the television and stereo system are correct.
³If you have connected this unit to an amplifier through the AUDIO OUT terminals, go to Audio in
the SET UP menus, and change “Speaker Setting” to suit your speakers. Select the large or small
icon for all the speakers you have connected. K
³Turn Virtual Surround off if it causes distortion. C
³Sound will only come from the 2 main speakers if Virtual Surround is on. Turn Virtual Surround off
if you are using three or more speakers. C
³While playing DVD-Audio that has video content, press [VIDEO OFF] to stop video output. >
³Due to the specifications on some types of televisions, both video and audio may be cut off when
you turn the VIDEO OFF feature on. >
³If the “D.MIX” indicator on the FL display goes out while playing a multi-channel DVD-Audio disc,
sound will only be output from speakers specified by the disc. Read the disc’s instructions for
details.
³“Error” on the FL display indicate that the track playing has been recorded with a nonstandard
system.
³If you have used analog connection (á page 6), go to the Audio menu and set “Digital Audio
Output” to “Off”. H
Sound
Piercing noise comes from the
speakers.
³If you have connected this unit to other equipment through the DIGITAL AUDIO OUT terminal,
ensure you have selected the correct settings for “Dolby Digital”, “DTS Digital Surround” and
“MPEG” in the SET UP menus’ Audio menu. L
Picture
Picture distorted.
³Some distortion is normal during SEARCH.
³The screen may be disrupted briefly when you turn off the VIDEO OFF feature.
No picture.
³Ensure that the equipment is connected properly. 7 8 9
³Make sure the television is on.
³Ensure the television’s video input setting (e.g., VIDEO 1) is correct.
The picture shown on the
television is not normal.
(The sides of the picture are cut
off or black bands appear at the
top and bottom of the screen.)
³Go to the Video menu in the SET UP screen, and change “TV Aspect” to suit your television.
You may also need to change the screen mode on the television itself. J
³Ensure that the unit is not connected through a video cassette recorder. 7
There is a lot of ghosting.
³Use the on-screen menu icons to adjust the picture quality. F
“No Play” appears on the unit’s
display.
³You inserted a disc the unit cannot play; insert one it can. 5
No on-screen display.
³Go to Display in the SET UP menus, and select “On” for “On-Screen Messages”. I
GUI screens not displayed or only
partially displayed on the
television.
³Move the cursor buttons [3,4] while the rightmost icon is highlighted to move them down. D
The disc’s menu is displayed in a
different language.
³Go to Disc in the SET UP menus, and select the preferred language for “Menus”. H
No menu play.
³Menus are only displayed if they are recorded on the disc.
“Check The Disc” appears on the
unit’s display.
³Disc is dirty. Wipe the disc clean. M
“H··” appears on the unit’s
display.
³Trouble is likely to have occurred. The number following “H” depends on the status of the unit.
Reset procedure:
Press [STANDBY/ON] to switch the unit to the standby mode and then back to ON. Alternatively,
press [STANDBY/ON] to switch the unit to the standby mode, disconnect the AC mains lead, and
then reconnect it.
³If the service numbers fail to clear, note the service number and contact a qualified service
person.
·· stands for a number.
“No Disc” appears on the unit’s
display.
Reference
Displays
³You haven’t inserted a disc; insert one.
³You haven’t inserted the disc correctly; insert it correctly. ;
Maintenance
To clean this unit, wipe with a soft, dry cloth.
³Never use alcohol, paint thinner or benzine to clean this unit.
³Before using chemically treated cloth, read the instructions that came with the cloth carefully.
31
Specifications
Power supply:
Power consumption:
Power consumption in
standby mode:
Dimensions:
AC 220–240 V, 50 Hz
19 W
approx. 4 W
449 (W)k281 (D)k99 (H) mm
(excluding protrusions)
Weight:
3.5 kC
Signal system:
PAL 625/50, PAL 525/60, NTSC
Operating temperature range: i5 to i35 oC
Operating humidity range:
5–90 % RH (no condensation)
Discs played:
DVD-Video
DVD-Audio
CD-Audio (CD-DA)
Video CD
CD-R/RW (CD-DA, Video CD
formatted discs)
Video output:
Output level:
1 Vp-p (75 ­)
Output connector:
Pin jack (2 systems)/AV1/AV2
S video output:
Y output level:
1 Vp-p (75 ­)
C output level:
NTSC; 0.286 Vp-p (75 ­)
PAL; 0.300 Vp-p (75 ­)
Output connector:
S terminal (1 system), AV1
RGB video output:
R output level:
0.7 Vp-p (75 ­)
G output level:
0.7 Vp-p (75 ­)
B output level:
0.7 Vp-p (75 ­)
Output connector:
AV1
Number of connectors:
1 system
Audio output:
Output level:
2 Vrms (1 kHz, 0 dB)
Output connector:
Pin jack/AV1/AV2
Number of connectors:
2CH:
1 system
5ch discrete output (5.1ch): 1 system
Audio signal output characteristics:
(1) Frequency response:
³DVD (linear audio):
2 Hz–22 kHz (48 kHz sampling)
2 Hz–44 kHz (96 kHz sampling)
2 Hz–88 kHz (192 kHz sampling)
³CD audio:
2 Hz–20 kHz
(2) S/N ratio:
³CD audio:
115 dB
(3) Dynamic range:
³DVD (linear audio):
103 dB
³CD audio:
99 dB
(4) Total harmonic distortion:
³CD audio:
0.002 %
Digital audio output:
Optical digital output:
Optical terminal
Coaxial digital output:
Pin jack
PHONES jack:
Stereo, 6.3 mm jack
Pickup:
Wave length:
658 nm/790 nm
Laser power:
CLASS 2/CLASS 1
Note
Specifications are subject to change without notice.
Weight and dimensions are approximate.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. PA PARIS-EST RUE AMBROISE CROIZAT CROISSY-BEAUBOURG BP70-77312 MARNE LAVALLEE, CEDEX 2 FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
RQT6026-B
Printed in Japan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising