Philips | NPX245/INT | Owner's Manual | Philips NeoPix Start Mini kivetítő NPX245/INT Felhasználói kézikönyv

Philips NeoPix Start  Mini kivetítő NPX245/INT Felhasználói kézikönyv
NeoPix Start+
EN User Manual
FR Manuel utilisateur
DE Bedienungsanleitung
ES Manual del usuario
IT Manuale d´uso
Mini projector
Register your product and get support at
www.philips.com/support
User Manual
NeoPix Start+
Mini projector
Register your product and get support at
www.philips.com/support
Table of contents
Introduction...................................................3
7
Dear customer................................................................. 3
Cleaning............................................................................15
About this user manual................................................ 3
Update software............................................................15
What’s in the box............................................................ 3
Troubleshooting............................................................ 16
1
General safety information..................4
8 Appendix................................................ 17
Setting up the product................................................. 4
Technical data................................................................17
Repairs............................................................................... 4
Power supply................................................................... 5
2 Overview..................................................5
Top view............................................................................. 5
Front view.......................................................................... 5
Side view............................................................................6
Rear view...........................................................................6
Remote control...............................................................6
Access home menu....................................................... 7
3 Initial operation...................................... 7
Placing projector............................................................. 7
Changing screen size....................................................8
Connecting power supply...........................................8
Preparing the remote control.....................................9
Power on and setup.................................................... 10
4 Connect to playback devices.............10
Connecting to devices through HDMI................... 10
Connecting to devices through AV......................... 10
Connecting to external speakers or headphones
............................................................................................. 11
5 Media playback ................................... 12
Movie playback..............................................................12
Music playback..............................................................12
Photo playback..............................................................13
6 Change settings.................................... 14
Picture settings.............................................................. 14
Sound settings............................................................... 14
Language settings........................................................ 14
Restore default settings............................................. 14
Rotate/flip projection screen................................... 14
Set sleep timer............................................................... 14
Set auto sleep................................................................ 14
Service.................................................... 15
Introduction
What’s in the box
Dear customer
b A/C power adapter
Thank you for purchasing this projector.
d Quick Start Guide
We hope you enjoy this product and the many
functions it offers!
a NeoPix Start+ projector (NPX245)
c Remote control with 2 AAA batteries
e Power plugs (EU, UK, US)
a
About this user manual
The quick start guide supplied with this product
allows you to start using this product quickly
and easily. Detailed descriptions can be found
in the following sections of this user manual.
Read the entire user manual carefully. Follow
all safety instructions in order to ensure proper
operation of this product (see General safety
information, page 4). The manufacturer
accepts no liability if these instructions are not
followed.
Symbols used
Notice
d
c
b
OK
Quick Start
Quick Start
Guide
Quick Start
Guide
Quick Start
Guide
Guide
Troubleshooting
This symbol indicates tips that will help
you in using this product more effectively
and easily.
e
DANGER!
Danger of personal injury!
This symbol gives warning of danger
of personal injury. Physical injury or
damage can result from improper
handling.
CAUTION!
Damage to the product or loss of data!
This symbol gives warning of damage
to this product and possible loss of
data. Damage can result from improper
handling.
Introduction3
1 General safety
information
Do not try to replace the built-in battery
yourself. Incorrect handling of the battery or
using the wrong type of battery can cause
damage to the product or cause injury.
DANGER!
Take note of all warning and safety notes
indicated. Do not make any changes or settings
that are not described in this user manual.
Incorrect operation, and improper handling can
lead to physical injury, damage to the product
or loss of data.
Risk of explosion with incorrect type
of batteries!
There is a risk of explosion if the wrong
battery type is used.
Do not try to replace the built-in
battery yourself.
Setting up the product
This product is for indoor use only. Place the
product securely on a stable, flat surface.
To help avoid possible injuries to persons or
damage to the product itself, position all cables
in such a way that no one will trip over them.
Do not operate the product in damp rooms.
Never touch the mains cable or the mains
connection with wet hands.
The product must have sufficient ventilation
and must not be covered. Do not put the
product in closed cabinets, boxes, or other
enclosures when in use.
Protect the product from direct sunlight,
heat, intense temperature fluctuations and
moisture. Do not place the product in the
vicinity of heaters or air conditioners. Observe
the information on temperature listed in the
technical data (see Technical data, page 17).
Do not expose the batteries (battery pack or
embedded batteries) to excessive heat such as
sunshine, or open fire.
Under the following conditions, a layer of
moisture can appear inside the product which
can lead to malfunctions:
•
if the product is moved from a cold to a
warm area;
• after a cold room is heated;
• when the product is placed in a damp
room.
Proceed as follows to avoid any moisture
buildup:
1
Seal the product in a plastic bag before
moving it to another room, in order for it to
adapt to room conditions.
2
Wait one to two hours before you take the
product out of the plastic bag.
Prolonged operation of the product causes the
surface to become hot. In case of overheating,
the product automatically switches to standby
mode.
The product should not be used in a very dusty
environment. Dust particles and other foreign
objects may damage the product.
Do not allow liquids to leak into the product.
Turn off the product and disconnect it from the
mains supply if liquids or foreign substances
leaked into the product. Have the product
inspected by an authorised service centre.
Do not allow children to handle the product
without supervision. The packing materials
should be kept out of the hands of children.
Always handle the product with care. Avoid
touching the lens. Never place heavy or sharp
objects on the product or on the power cable.
If the product gets too hot or emits smoke,
shut it down immediately and unplug the
power cable. Have your product checked by
an authorised service centre. Keep the product
away from open flames (e.g. candles).
The product has built-in battery. Do not
dissemble and modify. The built-in battery
should be replaced by qualified service staff
only.
4
Do not expose the product to extreme
vibrations. This may damage the internal
components.
For your own safety, do not use the product
during thunderstorms with lightning.
Repairs
Do not repair the product yourself. Improper
maintenance can result in injuries or damage to
the product. The product must be repaired by
an authorised service centre.
Please find the details of authorised service
centres on the warranty card supplied with this
product.
Do not remove the type label from this product,
as this will void the warranty.
Philips · NeoPix Start+
Power supply
Use only a power adapter which is certified for
this product (see Technical data, page 17).
Check whether the mains voltage of the power
supply matches the mains voltage available at
the setup location. This product complies with
the voltage type specified on the product.
2 Overview
Top view
The power outlet shall be installed near the
product and shall be easily accessible.
NeoPix
Start+
The capacity of the built-in battery diminishes
with time. If the product functions only with AC
power supply, the built-in battery is defective.
Contact an authorised service centre to replace
the built-in battery.
e dc
b
a
CAUTION!
Always use the
the projector.
button to turn off
Turn off the product and unplug from the
power outlet before cleaning the surface
(see Cleaning, page 15). Use a soft, lintfree cloth. Never use liquid, gaseous or easily
flammable cleaners (sprays, abrasives, polishes,
alcohol). Do not allow any moisture to reach
the interior of the product.
a
•
•
Switch the product on or to standby.
When the product is switched on, the
LED turns green. When the product is in
standby, the LED turns red.
b Navigation buttons
Navigate menu options.
c
Confirm a selection or entry.
d
DANGER!
Risk of eye irritation!
This product is equipped with a high
power LED (Light Emitting Diode),
which emits very bright light. Do not
look directly into the projector lens
during operation. This could cause eye
irritation or damage.
Select an input source: AV, HDMI or Media
Player.
e
Return to a previous menu screen.
Front view
a
b
c
a Vents
b Projection lens
c Focus adjustment knob
Adjust image sharpness.
Overview5
Side view
Remote control
a
b
c
OFF/ON
HDMI
USB
a
h
b
g
OK
f
a
c
e
Switch on or off the battery power supply.
b HDMI
Connect to the HDMI output on a playback
device.
c Standard USB port
• Connect to a USB storage device for
media play.
• Used for software update.
d
Rear view
a b cd e
a
Select an input source: AV, HDMI or Media
Player.
b
DC5V
DC
AV
MICRO SD
Confirm a selection or entry.
c
d
Return to a previous menu screen.
/
Increase or decrease volume.
a Micro USB port (DC 5V)
Used to charge the projector.
b
Connect to the power supply.
c AV
3.5 mm audio/video input; connect to the
analogue audio jacks and/or composite
video jack on a playback device.
d
3.5 mm audio output; connect to external
speakers or headphones.
e Micro SD card slot
Connect to a Micro SD card for media play.
6
e
Mute or restore volume.
f
Access the home menu.
g Navigation buttons
•
•
Navigate menu options.
Press / to change a selection.
•
•
Switch the product on or to standby.
When the product is switched on, the
LED turns green. When the product is in
standby, the LED turns red.
h
Philips · NeoPix Start+
Access home menu
The home menu provides easy access to media
player, setup and other useful features in the
projector.
1
Press
2
Press the Navigation buttons and OK to
select the following.
. The home menu is displayed.
3 Initial operation
Placing projector
You can install the projector in four different
configuration. Follow the guidelines below for
different projector placement.
Notice
For overhead mounting on ceiling,
purchase a projector mount
recommended by an installation
professional and follow the instructions
that come with the mount.
Before mounting on the ceiling, make
sure the ceiling can support the weight
of the projector and mounting kit.
•
•
•
•
PHOTO: Activate photo media player to
access and play photo files.
MUSIC: Activate music media player to
access and play music files.
MOVIE: Activate movie media player to
access and play movie files.
SETUP: Access menus to change
picture, sound and other settings.
For ceiling installation, this product
must be securely attached to the ceiling
in accordance with the installation
instructions. An improper ceiling
installation may result in accident, injury
or damage.
Front table
1
Place the projector on a table in front of the
projection screen. This is the most common
way to position the projector for quick
setup and portability.
2
To adjust projection to the correct position,
press , and go to SETUP - Panel Flip Rotate.
Front ceiling
1
Mount the projector on the ceiling with
upside up in front of the projection screen.
A projector mount is required to mount the
projector on ceiling.
Initial operation7
•
The projection distance ranges from 80 cm
to 200 cm/24”-60”.
Connecting power supply
The projector can be operated either on AC
power or built-in battery.
CAUTION!
2
Rear table
1
2
Always use the
button to turn the
projector on and off
To adjust projection to the correct position,
press , and go to SETUP - Panel Flip Rotate.
Place the projector on a table behind the
projection screen. A special rear projection
screen is required.
AC power operation
1
Fix an appropriate plug (EU, UK, US) onto
the round base of the power adapter by
aligning the pins and holes.
•
To detach the plug from the power
adapter, hold down the tab at the edge
of the round base, and simultaneously
turn and unlock the plug from the round
base of the power adapter.
To adjust projection to the correct position,
press , and go to SETUP - Panel Flip Rotate.
Rear ceiling
1
Mount the projector on ceiling with upside
up behind the projection screen. To mount
the projector on ceiling behind the screen,
a projector mount and a special rear
projection screen is required.
US
2
UK
EU
Connect the included power adapter to the
socket on the projector, and then to the
wall outlet.
•
The LED on the projector turns red.
a
2
To adjust projection to the correct position,
press , andgo to SETUP - Panel Flip Rotate.
DC5V
DC
AV
b
MICRO SD
Changing screen size
The projection screen size (or size of images) is
determined by the distance between the lens
of the projector and the projection surface.
•
8
The projection image size ranges from 20”
to 60”.
Philips · NeoPix Start+
Battery power operation
DANGER!
The projector can be also operated on built-in
battery for portability.
Risk of explosion with incorrect type
of batteries!
Charging projector
There is a risk of explosion if the
incorrect battery type is used.
Do not try to replace the built-in
battery yourself.
Before first use, charge the projector for
2 hours. Two options are available to charge the
projector.
Option 1:
•
•
Adjust the
switch to the
position.
Using the included power adapter, connect
the DC jack on the projector to the wall
outlet.
Preparing the remote
control
CAUTION!
The improper use of batteries can
lead to overheating, explosion, risk of
fire and injury. Leaking batteries can
possibly damage the remote control.
Option 2:
•
To charge the projector through USB, turn
off the projector by adjusting the
switch.
• Using a USB cable (not included), connect
the Micro USB port (DC 5V) on the back
of the projector to a power bank or other
mains charger (DC 5V).
Notice
Never expose the remote control to
direct sunlight.
Avoid deforming, dismantling or
charging the batteries.
Avoid exposure to open fire and water.
Replace empty batteries immediately.
Remove the batteries from the remote
control if not in use for long periods of
time.
The projector cannot be turned on using
USB power (DC 5V).
Switch on/off battery power
•
To switch on or off the battery power
supply, adjust the
switch on the
projector. When the battery power supply is
switched on, the LED on the projector turns
red.
OFF/ON
•
HDMI
USB
1
Open the battery compartment.
2
Insert the supplied batteries (type AAA)
with correct polarity (+/-) indicated.
3
Close the battery compartment.
•
When using the remote control, point
the remote control at the rear side of the
projector where the IR sensor is located,
and make sure there is no obstacle
between the remote control and the rear
side of the projector.
OFF/ON
For normal use, the fully charged
projector can be operated for 60
minutes.
Notice
The capacity of the built-in battery
diminishes with time. If the projector
functions only with AC power supply, the
built-in battery is defective. Contact an
authorised service centre to replace the
built-in battery.
Initial operation9
Power on and setup
Notice
The projector cannot be turned on using
USB power (DC 5V).
1
4 Connect to
playback devices
Notice
Press
to turn on the projector. The LED
on the projector turns from red to green.
•
2
To turn off the projector, press
again.
The LED on the projector turns from
green to red.
• The distance between the projector and
the screen determines the actual size of
the image.
To adjust image focus, turn the focus knob
around the lens of the projector.
Make sure all devices are disconnected
from the power outlet before establishing
or changing any connections.
Connecting to devices
through HDMI
Connect a playback device (e.g. a Blu-ray
player, gaming console, camcorder, digital
camera or PC) to the projector through HDMI
connection. With this connection, images are
shown on the projection screen, and audio is
played on the projector.
1
NeoPix
Start+
Using an HDMI cable, connect the HDMI
connector on the projector to the HDMI
output on the playback device.
OFF/ON
2
HDMI
USB
Press
to display the input source list,
and then select HDMI.
Connecting to devices
through AV
Connect a playback device (e.g. a DVD player,
gaming console, camcorder or digital camera)
to the projector through AV connection. With
this connection, images are shown on the
projection screen, and audio is played on the
projector.
10
Philips · NeoPix Start+
1
Using a RCA cable with 3.5 mm plug,
connect the AV connector (3.5 mm) on the
projector to the analogue audio output
jacks (red and white) and/or composite
video output jack on a playback device.
DC5V
DC
AV
DC5V
AV
MICRO SD
MICRO SD
2
2
DC
When connecting to the headphones, use
the volume control on the remote control to
adjust the volume to a comfortable level.
Press
to display the input source list,
and then select AV.
Connecting to external
speakers or headphones
Connect external speakers or headphones
to the projector. With this connection, audio
from the projector can be played through the
external speakers or headphones.
DANGER!
Danger of hearing damage!
Before connecting the headphones,
turn down the volume on the device.
Do not use the device over a longer
time at high volume – especially when
using headphones. This could lead to
hearing damage.
1
Using a 3.5 mm audio cable, connect the
connector on the projector to the analogue
audio input (3.5mm jack, or red and white
jacks) on the external speakers. Or connect
the
connector on the projector to
headphones.
•
The speakers of the projector are
deactivated automatically when the
external speakers or headphones
are connected to the projector.
Connect to playback devices11
5 Media playback
This section helps you use the projector to play
media from a wide range of sources.
Notice
The projector supports a USB storage
device that is formatted for FAT16 or
FAT32 file systems.
player and access video files.
•
5
6
Movie playback
The following file formats are supported:
.dat/.mpg/.mpeg/.ts/.trp/.tp/.vob/.mp4/.mkv/.
avi/.flv/.3gp
Connect a USB storage device to the USB
port on the projector.
OFF/ON
HDMI
USB
7
•
Or connect a Micro SD card to the
MICRO SD slot on the projector.
DC5V
DC
AV
MICRO SD
During video playback, press OK. The
playback control icons are displayed at the
bottom of the projection screen. You can
access the following playback functions.
•
•
•
•
•
Supported file formats
1
If video media player is selected,
only the playable video files can be
displayed.
Select a video file and press OK to play
video.
Pause or resume play
Fast search backward or forward
Select a previous or next video file
Stop play
Select a play mode: repeat one/repeat
all
• Mark two points to repeat play
• Access playlist
• Access current file information
• Slow forward
• Step forward
• Set aspect ratio (auto, 16:9 and 4:3)
Select a control function and press OK
to trigger the control. To exit a particular
mode, press
.
Music playback
Supported file formats
The following file formats are supported: mp3/.
aac/.ogg/.flac
microSD
2
3
12
Repeat step 1 to 2 in ‘Movie playback’, and
the home menu is displayed.
2
Press the Navigation buttons and OK to
select a following media player.
Press the Navigation buttons and OK to
select a following media player.
•
•
•
4
1
Press to display the home menu on the
projection screen.
MUSIC: access and play audio files only.
MOVIE: access and play video files only.
PHOTO: access and play photo files
only.
Select MOVIE to activate video media
•
•
•
3
MUSIC: access and play audio files only.
MOVIE: access and play video files only.
PHOTO: access and play photo files
only.
Select MUSIC to activate music media
player and access music files.
Philips · NeoPix Start+
•
4
5
If music media player is selected,
only the playable music files can be
displayed.
Select a music file and press OK to play
music.
slide show.
5
During music playback, press OK. The
playback control icons are displayed at the
bottom of the projection screen. You can
access the following playback functions.
•
•
•
•
•
•
•
•
6
Pause or resume play
Fast search backward or forward
Select a previous or next music file
Stop play
Select a play mode: repeat one/repeat
all
• Mark two points to repeat play
• Mute or restore volume
• Access playlist
• Access current file information
Select a control function and press OK
to trigger the control. To exit a particular
mode, press
.
During slide show, press OK. The playback
control icons are displayed at the bottom
of the projection screen. You can access the
following playback functions.
6
Pause or resume play
Stop play
Select a play mode: repeat one/repeat
all
• Play music
• Access playlist
• Access current file information
• Rotate a photo
• Zoom in or out a photo
• Pan a zoomed picture up, down, left or
right
Select a control function and press OK
to trigger the control. To exit a particular
mode, press
.
Photo playback
Supported file formats
The following file formats are supported: .jpeg/.
bmp/.png/.gif
1
Repeat step 1 to 2 in ‘Movie playback’, and
the home menu is displayed.
2
Press the Navigation buttons and OK to
select a following media player.
•
•
•
3
MUSIC: access and play audio files only.
MOVIE: access and play video files only.
PHOTO: access and play photo files
only.
Select PHOTO to activate photo media
player and access photo files.
•
4
If photo media player is selected,
only the playable photo files can be
displayed.
Select a photo file and press OK to start
Media playback 13
6 Change settings
Language settings
This section helps you change the settings of
the projector.
1
Press
2
Select SETUP, and then press OK to access
the setting options.
3
Select OSD Language, and then press /
on the remote control to select your desired
language for on-screen menu.
Picture settings
1
Press
2
Select SETUP, and then press OK to access
the setting options.
Restore default settings
3
Select a picture option, and then press /
to change:
1
Press
2
Select SETUP, and then press OK to access
the setting options.
3
Select Restore Factory Default, and then
press OK.
4
Follow the on-screen instructions to start or
cancel resetting.
•
•
•
•
.
.
Picture Mode: Select pre-defined color
settings for picture or video display.
Select User to customize the following
settings:
• Contrast: Set color contrast.
• Brightness: Set color brightness.
• Color: Set color saturation.
• Sharpness: Set image sharpness.
Color Temperature: Set different color
temperature.
Aspect Ratio: Set a screen ratio.
Noise Reduction: Set a noise reduction
level.
Sound settings
Rotate/flip projection
screen
1
Press
2
Select SETUP, and then press OK to access
the setting options.
.
3
Select Panel Flip Rotate, and then press
/ to rotate or flip the projection screen.
Set sleep timer
1
Press
2
Select SETUP, and then press OK to access
the setting options.
Set a period of time after which the projector
turns off automatically.
3
Select a sound option, and then press /
to change:
1
Press
2
Select SETUP, and then press OK to access
the setting options.
3
Select Sleep Timer, and then press / to
select a period of time (in minute).
•
•
•
•
14
.
.
Sound Mode: Select pre-defined sound
settings for your video or music. Select
User to customize the following settings:
• Treble: Set a treble level.
• Bass: Set a bass level.
Balance: Adjust balance levels to
experience the original sound of your
movie and music.
Auto Volume: Set auto volume on to
reduce sudden changes in volume.
Surround Sound: Turn surround on or off.
.
Set auto sleep
Set a time length so that the projector turns off
automatically after a period of time of inactivity.
1
Press
2
Select SETUP, and then press OK to access
the setting options.
.
3
Select Auto Sleep, and then press / to
select a period of time (in hour).
Philips · NeoPix Start+
7 Service
Cleaning
•
3
DANGER!
4
Turn on the projector, then the upgrade
starts automatically. The LED on the
projector blinks during upgrade.
5
Wait about 15 seconds. The upgrade
completes and the projector turns off
automatically.
6
Disconnect the USB from the projector,
then turn on the projector.
Instructions for cleaning!
Use a soft, lint-free cloth. Never use
liquid or easily flammable cleansers
(sprays, abrasives, polishes, alcohol,
etc.). Do not allow any moisture to
reach the interior of the projector.
Do not spray the projector with any
cleaning fluids.
Make sure the unzipped file name
is “GXY_MELODY.bin” or “GXY_
MELODY_64.bin”.
Turn off the projector, then connect the USB
flash drive to the projector.
Wipe over the surfaces gently. Be
careful that you do not scratch the
surfaces.
Cleaning the lens
Use a soft brush or lens cleaning paper for
cleaning the lens of the projector.
DANGER!
Do not use any liquid cleaning agents!
Do not use any liquid cleaning
agents for cleaning the lens, to avoid
damaging the coating film on the lens.
Update software
The latest software of the projector can be
found on www.philips.com/support for you
to get the best features and support from the
projector.
Before you update the software of the
projector, check the current software version:
•
Press
, and then select SETUP - Info.
CAUTION!
Do not turn off the projector or remove
the USB flash drive during the update.
Update SW through USB
1
Check the latest software version on www.
philips.com/support. Find your product
(model number: NPX245), and locate
‘Software and drivers’.
2
Download the software into the USB flash
drive. Unzip the downloaded software file
and save in the root directory of the USB
flash drive.
Service15
Troubleshooting
1
Turn the projector off by pressing
Power cycling
2
Wait at least ten seconds.
3
Turn the projector on by pressing
4
If the problem persists, please contact our
technical service centre or your dealer.
If a problem occurs that cannot be corrected
with the instructions in this user manual, follow
the steps given here.
.
once.
Problems
Solutions
The projector cannot be turned on.
• Disconnect and connect the power cable and try
to turn the projector on again.
The projector cannot be turned off.
• Press and hold longer than ten seconds. If this
does not work, disconnect the power cable.
No image from the external HDMI device.
• Disconnect the HDMI cable or switch off the
HDMI device.
• Wait three seconds.
• Reconnect the HDMI cable or switch on the HDMI
device again.
No sound from the external connected
device.
• Check the cables to the external device.
• Check that the sound is activated on the external
device.
• Only the original cables from the device
manufacturer may function.
No sound from external HDMI output
device.
• On the HDMI output device, set the audio setting
to Multichannel (Raw data) & Stereo (PCM).
No sound when you connect your
computer via HDMI cable.
• Check that the sound is activated on the
computer.
Only the home menu appears and not the
image from the external device.
• Check if the cables are connected to the correct
sockets.
• Check that the external device is turned on.
• Check if the video output of the external device is
turned on.
The projector turns itself off.
• When the projector is running for a long period of
time, the surface becomes hot.
• Check that the power cable is connected correctly.
The projector cannot read the USB stick.
• The projector does not support the exFAT file
system.
• Format the USB stick in FAT format, then use it.
The projector does not react to remote
control commands.
• Check the batteries of the remote control.
The temperature of the projector’s surface
is warm.
• For this projector it is normal to generate
moderate heat during operation.
What to do if the projector does not work
when connecting to a notebook PC?
• Check that the HDMI cable is plugged correctly.
• Make sure that the notebook PC has been
switched to projector display.
16
Philips · NeoPix Start+
8 Appendix
Technical data
Technology/optical
Optical technology ...............................................LCD
Light source ...................................................RGB LED
Resolution ......................................... 240 × 320 pixel
LED lifetime .......................................up to 20,000 h
Contrast ....................................................................60:1
Aspect ratio .............................................4:3 and 16:9
Throw ratio ............................................................... 1,4:1
Brightness .......................................... up to 10 lumen
Projection image size (diagonal)
..................................................up to 60’’ (150 cm)
Projection distance
................................... 80 cm - 200 cm/24”- 60”
Projection modes
..................front, rear, front ceiling, rear ceiling
Focus adjustment.........................................electrical
Frame rate............................................................. 30 Hz
Image lag time..................................................... <5 ms
Image response time........................................ < 5 ms
Product details
Dimensions (W × D × H) .......... 130 x 80 x 50 mm
Weight .................................................................... 258 g
Operating temperature..................................< 40 °C
Storage temperature.......................................< 60 °C
Package content
NeoPix Start+ projector, remote control with
2 AAA batteries, AC adapter, power plugs (EU,
UK, US), Quick Start Guide
Sound
Built-in speakers........................................................... 1
Output power...................................................... 1 x 1 W
Connection
Connectivity...................... HDMI, CVBS, USB (2.0),
..................................................Micro SD card slot,
..................................... headphone out (3.5 mm)
Power source
Power consumption.......................operating: 24 W
.........................................................Standby: 0.3 W
Power supply......................................power adapter
.......Input: 100-240V~, 50/60Hz, 0.7 A (max)
................................................Output: DC 12 V, 2 A
Appendix17
•
•
The CE marking certifies, that the product
meets the main requirements of the
European Parliament and Council directives
EMC directive 2014/30/EU, LVD directive
2014/35/EU, EN 55032:2015, EN 55035:2017,
EN 61000-3-2:2014, EN 61000-3-3:2013,
EN 60065:2014+A11:2017 on information
technology equipment, regarding safety and
health of users and regarding electromagnetic
interference.
The Declaration of Compliance can be
consulted on the site www.philips.com/
projection.
Preservation of the environment as part
of a sustainable development plan is an
essential concern of Screeneo Innovation SA.
The desire of Screeneo Innovation SA is to
operate systems respecting the environment
and consequently it has decided t o integrate
environmental performances in the life cycle
of these products, from manufacturing to
commissioning use and elimination.
Adjust or relocate the receiving antenna.
Increase the separation between the
device and receiver.
• Connect the device into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1
this device may not cause harmful
interference;
2
this device must accept any interference
received, including interference that may
cause undesired operation.
FCC RF Radiation Exposure Statement:
This transmitter must not be in co-location
or operating in conjunction with any other
antenna or transmitter. This device complies
with FCC RF radiation exposure limits set forth
for an uncontrolled environment.
This device should be installed and operated
with a minimum distance of 20 centimetres
between the device and your body.
FCC ID: 2ASRT-NPX245
Canada Regulatory Compliance
Federal Communications Commission (FCC)
Statement: You are cautioned that changes or
modifications not expressly approved by the
party responsible for compliance could void the
user’s authority to operate the device.
This device has been tested and found to
comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This device generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this device does cause harmful
interference to radio or television reception,
which can be determined by turning the device
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
18
This device complies with Industry Canada CAN
ICES-3 (B)/NMB-3(B)
RSS-Gen & RSS-247 statement: This device
complies with Industry Canada RSS standard(s).
Operation is subject to the following two
conditions:
1
This device may not cause interference, and
2
This device must accept any interference,
including interference that may cause
undesired operation of the device.
RF Radiation Exposure statement: The
device meets the exemption from the routine
evaluation limits in section 2.5 of RSS102 and
users can obtain Canadian information on RF
exposure and compliance.
This device should be installed and operated
with a minimum distance of 7.8 inches
(20 centimetres) between the device and your
body.
Philips · NeoPix Start+
operating and maintenance instructions.
Packaging: The presence of the logo (green
dot) means that a contribution is paid to an
approved national organisation to improve
package recovery and recycling infrastructures.
Please respect the sorting rules set up locally
for this kind of waste.
Screeneo Innovation SA shall not be liable for
any damages or problems arising from the use
of any option s or any consumable materials
other than those designated as original
Screeneo Innovation SA/PHILIPS products or
Screeneo Innovation SA/PHILIPS approve d
products.
Batteries: If your product contains batteries,
they must be disposed of at an appropriate
collection point.
Screeneo Innovation SA shall not be held liable
for any damage resulting from electromagnetic
interference that occurs from the use of any
interface cables other than those designated as
Screeneo Innovation SA/PHILIPS products.
Product: The crossed-out waste bin symbol on
the product means that the product belongs
to the family of electrical and electronic
equipment. In this respect, the European
regulations ask you to dispose of it selectively:
All rights reserved. No part of this publication
may be reproduced, stored in a retrieval
system or transmitted in any form or by any
means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior
written permission of Screeneo Innovation SA.
The information contained herein is designed
only for use with this product. Screeneo
Innovation SA. is not responsible for any use of
this information as applied to other devices.
•
At sales points in the event of the
purchase of similar equipment.
• At the collection points made available
to you locally (drop-off centre, selective
collection, etc.).
In this way you can participate in the reuse
and upgrading of Electrical and Electronic
Equipment Waste, which can have an effect on
the environment and human health.
This user manual is a document that does not
represent a contract.
Errors, printing errors and changes are reserved.
Copyright © 2019 Screeneo Innovation SA.
The paper and cardboard packaging used can
be disposed of as recyclable paper. Have the
plastic wrapping recycled or dispose of it in
the non-recyclable waste, depending on the
requirements in your country.
Trademarks: The mentioned references in
this manual are trademarks of the respective
companies. The lack of the trademarks ®
and ™ does not justify the assumption that
these dedicated terminologies are free
trademarks. Othe rproduct names used herein
are for identification purposes only and may
be trademarks of thei r respective owners.
Screeneo Innovation SA disclaims any and all
rights in those marks.
Neither Screeneo Innovation SA nor its affiliates
shall be liable to the purchaser of this product
or third parties for damages, losses, costs, or
expense s incurred by the purchaser or third
parties as a result of accident, misuse, or abuse
of this product or unauthorised modifications,
repairs, or alterations to this product, or failure
to strictly comply with Screeneo Innovation SA
Appendix19
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. used
under license.
This product was brought to the market by Screeneo Innovation SA., further referred to in this
document as Screeneo Innovation SA., and is the manufacturer of the product.
2019 © Screeneo Innovation SA.
All rights reserved.
Headquarters:
Screeneo Innovation SA.
Route de Lully 5C
1131 - Tolochenaz – Switzerland
www.philips.com/welcome
NeoPix Start+
EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising