Enjoy
Home Theatre System
Play DVD
Listen to Radio
1 Press OPEN/CLOSE
on the front of
the DVD system to open the disc tray.
1 Press TUNER
.
Front display
HTS 5310S
Quick Star t Guide
DVD Player (front)
2 Press and hold PLAY
2 Place DVD in tray with the label facing up.
3 Press OPEN/CLOSE
again.
4 Press UP
, DOWN
, RIGHT
or
LEFT
to scroll through the options in
the DVD menu.
5 Press PLAY
on the option you want.
6 To stop press STOP
.
Tip Press PLAY
to resume from where
you stopped or press STOP
and PLAY
to start from the beginning of the title.
7 Press DISC MENU
DVD menu.
to go back to the
until ‘START’ appears.
Tip This feature is only available
for first time setup, refer to user
manual if you wish to program
radio stations again or for manual
programming.
Connect
3 Once completed you can use NEXT
or
PREVIOUS
to select a radio station.
Setup
Experience Surround Sound
1 Press SURR
Multi-channel.
to switch between Stereo and
Enjoy
2 Press SOUND
for either Concert, Drama,
Action or Sci-fi preset digital sound effects.
Troubleshooting
For more troubleshooting tips, see the user manual.
What’s in the Box
Problem
Tip
No power
• Check if the AC power cord is properly connected.
• Press the STANDBY-ON on the front of the DVD system to turn on the power.
No picture
• Press DISC on remote control.
• Check connection to TV and ensure the plugs are firmly in place.
No sound or
distorted sound
• Adjust the volume.
• Check the speaker connections and settings.
• Check audio connections and press SOURCE button to select the correct input source.
Remote control
does not work
• Check that the batteries are loaded correctly or replace the batteries with new ones.
• Select the source (DISC or TUNER, for example) before pressing the function button.
• Reduce the distance between the remote control and the system.
• Point the remote control directly toward the IR sensor.
DVD system
Centre speaker
Quick start guide
Subwoofer
Remote control
and 2 batteries
Scart cable
(black plug)
AM/MW
loop antenna
Need help?
User Manual
For more product information refer to the user
manual of the home theatre system.
Online
Go to www.philips.com/support
Front speakers
(left & right)
2005 © Koninklijie Philips N.V.
All rights reserved.
12 NC 31 39 115 16351
www.philips.com
Rear speakers
(left & right)
FM wire antenna
User manual
Setup
Connect
Position Speakers &
Subwoofer
Connect Speakers &
Subwoofer to DVD System
1 Place centre speaker on or close to the TV.
Connect the various coloured plugs from the
speakers and subwoofer to the same colour
socket on the rear of DVD system.
2 Place subwoofer on the floor.
3 Place front speakers equal distance from the
TV and angle them 45 degree to the listener.
4 Place rear speakers facing the listener, equal
distance on the left and right.
Front
Speaker
(right) Sub-Woofer
Centre
Speaker
Front
Speaker
(left)
Connect DVD system to TV
1 Use the supplied black Scart cable to connect
the SCART socket on the rear of the DVD
system and the SCART input socket at the
rear of the TV.
2 Plug in the power cable of the DVD system
to an AC outlet.
Insert Batteries in
Remote Control
1 Remove batteries compartment cover.
2 Insert the provided batteries in the remote
control. Take note of where the positive and
negative ends should go.
3 Replace the batteries compartment cover.
Tip To connect other devices
to the DVD system, refer to
the use manual.
Remote Control (back)
Television (back)
SCART IN
SCART IN
To antenna
or set-top
box
Fix Antennas
DVD System (back)
1 Connect the FM antenna to the FM socket,
extend the antenna and fix it on the wall.
Find Correct Viewing Channel
Y
Pr
Pb
SCART
DVD System (back)
Pr
2 Press DISC
on the
remote control repeatedly
until ‘DISC’ appears on the
front panel.
SCART
Y
Pb
Pr
Y
Pb
2 Unfold the AM/ MW loop antenna and fix the
claw into the slot.
Rear
Speaker
(right)
DVD System (back)
Rear
Speaker
(left)
Connect Audio from TV
to DVD System (Optional)
Use the red & white audio cables to connect
the red & white TV-IN sockets on the rear of
the DVD system and the red & white AUDIO
OUT sockets on the TV.
Television (back)
VIDEO OUT
(CVBS)
3 Push back tab and insert each wire into slot.
AUDIO OUT
VIDEO OUT
(CVBS)
AUDIO IN
DVD System (back)
Pr
Y
Pb
Pr
Y
Pb
MW loop
antenna
1 Press STANDBY-ON
on the DVD
system’s remote control.
DVD System (back)
Tip Some TVs may not
have an AUDIO OUT jack.
3 Press SETUP
.
4 Switch on the TV.
5 Press ‘0’ on the TV’s remote
control, then repeatedly
press the Channel Down
button until you see the
General Setup Page. This is
the correct viewing channel
for the home theatre
system.
Tip In some TVs, to find the
correct viewing channel, you
can keep pressing the AV or
the SELECT buttons. If still
unable to find the correct
viewing channel, check the
connections again or check
your TV’s user manual.
6 Press SETUP
to finish.
Tip To make changes to any of the options in
the Setup menus, refer to the user manual.
">