Shark IR141 ION™ X40 Ultra-Light Cordless Stick Vacuum User Manual

Add to my manuals
10 Pages

advertisement

Shark IR141 ION™ X40 Ultra-Light Cordless Stick Vacuum User Manual | Manualzz
ION X40
TM
CORD-FREE ULTRA-LIGHT
IR140
Series
OWNERS GUIDE
IMPORTANT SAFETY INSTRUCTIONS
FOR HOUSEHOLD USE ONLY • PLEASE READ CAREFULLY BEFORE USE
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT force into outlet or try to modify to fit.
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
THE DUOCLEAN® FLOOR NOZZLE, WAND,
AND HANDVAC CONTAIN ELECTRICAL
CONNECTIONS:
1. This vacuum consists of a motorized
nozzle, wand, and handvac. These
components contain electrical
connections, electrical wiring, and
moving parts that potentially present
risk to the user.
2. Before each use, carefully inspect all parts
for any damage. If a part is damaged,
discontinue use.
3. Use only identical replacement parts.
4. This vacuum contains no serviceable parts.
5. Use only as described in this manual.
DO NOT use the vacuum for any purpose
other than those described in this manual.
6. With the exception of filters, DO NOT
expose any parts of the vacuum to water or
other liquids.
11. Only use Shark® branded filters and
accessories. Failure to do so will void
the warranty.
GENERAL USE
17. DO NOT leave the vacuum unattended
while powered on.
QUICK
START
GUIDE
7. This vacuum is not intended for use by
anyone with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, unless they have been
given supervision or instruction concerning
use of the appliance by a person responsible
for their safety. Children should be
supervised to ensure that they do not play
with the vacuum.
8. Always turn off the vacuum before
connecting or disconnecting any current
carrying hoses, motorized nozzles,
chargers, batteries, or other electrical or
mechanical parts.
9. DO NOT handle plug or vacuum with
wet hands.
10. DO NOT use without dust cup, filters, and
brushrolls in place.
12. DO NOT put any objects into nozzle or
accessory openings. DO NOT use with any
opening blocked; keep free of dust, lint,
hair, and anything that may reduce airflow.
13. DO NOT use if nozzle or accessory airflow
is restricted. If the air paths or the
motorized floor nozzle become blocked,
turn the vacuum off and remove the
battery. Remove all obstructions before
you reinsert the battery and turn on the
unit again.
14. Keep nozzle and all vacuum openings
away from hair, face, fingers, uncovered
feet, or loose clothing.
15. DO NOT use if vacuum is not working as
it should, or has been dropped, damaged,
left outdoors, or dropped into water.
16. Use extra care when cleaning on stairs.
18. When powered on, keep the vacuum
moving over the carpet surface at all times
to avoid damaging the carpet fibers.
21. DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
c) Outdoor areas
d) S
paces that are enclosed and may
contain explosive or toxic fumes or
vapors (lighter fluid, gasoline, kerosene,
paint, paint thinners, mothproofing
substances, or flammable dust)
22. Turn off the vacuum before inserting or
removing the battery, as well as before
plugging in or unplugging the charger.
23. Turn off the vacuum and remove the
battery before any adjustment, cleaning,
maintenance or troubleshooting.
24. During cleaning or routine maintenance,
DO NOT cut anything other than hair,
fibers, or string wrapped around the
brushroll.
25. Allow all filters to air-dry completely before
replacing in the vacuum to prevent liquid
from being drawn into electric parts.
26. DO NOT modify or attempt to repair the
vacuum or the battery yourself, except as
indicated in this manual. DO NOT use the
battery or vacuum if it has been modified
or damaged.
29. Use only Shark® chargers YLS0243A-T288080
or YLS0483A-T2880802. Use of incorrect
charger may create a risk of fire when used
with ION Power Pack Battery XBAT200.
30. Keep the battery away from all metal
objects such as paper clips, coins, keys,
nails, or screws. Shorting the battery
terminals increases the risk of fire or burns.
31. Under abusive conditions, liquid may be
ejected from the battery. Avoid contact
with this liquid, as it may cause irritation or
burns. If contact occurs, flush with water. If
liquid contacts eyes, seek medical help.
32. Battery should not be stored at
temperatures below 37.4°F (3°C) or above
104°F (40°C) to maintain long-term battery
life.
33. DO NOT charge battery at temperatures
below 50°F (10°C) or above 104°F (40°C).
34. Store the appliance indoors. DO NOT use
or store it below 37.4°F (3°C). Ensure the
appliance is at room temperature before
operating.
35. DO NOT expose the battery to fire or
temperatures above 265°F (130°C) as it may
cause explosion.
BATTERY PACK
27. The battery is the power source for the
vacuum. Carefully read and follow all
charging instructions.
28. To prevent unintentional starting, ensure
the vacuum is powered off before picking
up or carrying the vacuum. DO NOT carry
the appliance with your finger on the
power switch.
19. DO NOT place vacuum on unstable
surfaces such as chairs or tables.
20. DO NOT use to pick up:
a) Liquids
b) Large objects
c) H
ard or sharp objects (glass, nails,
screws, or coins)
d) L
arge quantities of dust (including
drywall, fireplace ash, or embers).
DO NOT use as an attachment to power
tools for dust collection.
e) Smoking or burning objects (hot coals,
cigarette butts, or matches)
f) F
lammable or combustible materials
(lighter fluid, gasoline, or kerosene)
g) Toxic materials (chlorine bleach,
ammonia, or drain cleaner)
SAVE THESE INSTRUCTIONS
s h a r kc l e a n . c o m
s h a r kc l e a n . c o m
ASSEMBLY
YOUR ION POWER PACK BATTERY
Your ION Power Pack Battery does not come fully charged. Prior to first use, charge completely. During first
use, discharge fully to condition your ION Power Pack Battery. Failure to do so may cause LED indications to
work incorrectly.
RECYCLING THE ION POWER PACK BATTERY
When your ION Power Pack Battery needs to be replaced, dispose of it or recycle it in accordance with local
ordinances or regulations. In some areas, it is illegal to place spent lithium-ion batteries in the trash or in a
municipal solid waste stream. Return spent power packs to an authorized recycling center or to retailer for
recycling. Contact your local recycling center for information on where to drop off the spent power pack.
RUNTIMES PER FULLY-CHARGED BATTERY
MODE AND SETTINGS
3
(Click)
ION POWER
ION BOOST
Up to 12 Minutes
HANDVAC ONLY
Up to 40 Minutes
BARE FLOOR (Wand/Nozzle Connected)
Up to 32 Minutes
Up to 11 Minutes
CARPET (Wand/Nozzle Connected)
Up to 26 Minutes
Up to 10 Minutes
NOTE: See enclosed Quick Start Guide for number of batteries included with your vacuum.
LED BATTERY POWER METER
Charging
2
(Click)
Low
Charge
Mid
Charge
Nearly
Full
Full
Charge
NOTE: Full charge takes approximately 3.5 hours.
In Use
1
Full
Charge
Mid
Charge
Nearly
Empty
No
Charge
Low
Charge
(Click)
1.Insert wand into floor nozzle.
2. Insert handheld vacuum into wand.
3.Insert battery into handheld vacuum.
For proper operation, ensure all components are firmly connected.
NOTE: A complete charge takes approximately 3.5 hours. The ION Power Pack, like all lithium-ion products, will naturally
decrease in capacity over time from the 100% capacity of a new battery.
s h a r kc l e a n . c o m
s h a r kc l e a n . c o m
CHARGING THE ION POWER PACK BATTERY
SMART RESPONSE™ TECHNOLOGY
USING THE ION POWER PACK CHARGER
Surface Settings
Power Button
Suction Settings
CARPET
For carpets.
ION BOOST
FLOOR
Press for a timed
1-minute boost of increased
suction for high-traffic
areas and heavy messes.
For bare floors and
small area rugs.
OR
ION
IN THE VACUUM
OUT OF THE VACUUM
Connect ION Power Pack Battery Charger to the
Charging Dock by inserting into hole and turning
clockwise to lock.
To use ION BOOST
mode for longer
than 1-minute, you
can re-press the
ION BOOST
button when
the 1-minute
period ends.
You can end
ION BOOST
mode prior to
the 1-minute
by pressing the
ION BOOST button.
USING THE ION POWER PACK CHARGING DOCK
1
ION POWER
For everyday cleaning.
2
Press and
hold ION BOOST for
manual control of
the mode for as long
as you need it
Place battery onto dock, then connect charger to
wall outlet.
PLEASE NOTE: Use of ION BOOST mode will drain your ION Power Pack faster.
NOTE: Not all units come with the charging dock. See enclosed Quick Start Guide for your configuration.
s h a r kc l e a n . c o m
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select CARPET and ION BOOST settings.
NOTE: Select Carpet setting for stuck-on dirt and debris.
s h a r kc l e a n . c o m
MAINTAINING YOUR VACUUM
VERSATILE CLEANING
FLOOR
EMPTYING THE DUST CUP
ABOVE FLOOR
1
Wand
Release
Press the Power button, then choose your Surface
setting and your Suction setting. Place your foot
gently on the floor nozzle and tilt the handle back.
Press the Wand Release button to disconnect
the handheld vacuum. Attach accessory, then press
the power button.
Wand
Release
Disconnect the hand vacuum from the wand.
2
NOTE: Brushroll will only engage when the handle is
tilted back.
Press the dust cup Empty button.
tand the vacuum upright. Step on the Floor Nozzle
S
Release pedal and pull the wand up to disconnect it
from the floor nozzle. Attach accessory, then press
the power button.
NOTE: All accessories attach to either the handheld
vacuum or the wand.
s h a r kc l e a n . c o m
s h a r kc l e a n . c o m
MAINTAINING YOUR VACUUM
MAINTAINING YOUR VACUUM
CLEANING THE FILTERS
To clean filters, rinse with water only to prevent damage from cleaning chemicals. Allow all filters to air-dry
completely for at least 24 hours before replacing them in the vacuum to prevent liquid from being drawn into
electric parts.
IMPORTANT: DO NOT use soap when cleaning the filters.
FILTER COVER
PRE-MOTOR
FILTER
FILTER
FRAME
SOFT ROLLER
POST-MOTOR
FILTER
Securely close the garage door by clicking it in to place
on both sides.
FILTER
COVER
PRE-MOTOR FILTER
Remove cover and frame. Slide filter off frame.
Rinse with water. Air-dry completely for at least
24 hours before reinserting. Tap off loose dirt
between washes as needed.
ACCESSING BRUSHROLLS
POST-MOTOR FILTER
Remove cover and filter. Rinse filter with water.
Air-dry completely for at least 24 hours before
reinserting. Tap off loose dirt between washes
as needed.
NOTE: Failure to securely click garage door in place
on both sides will result in the brushroll indicator light
blinking green and the brushrolls will not spin.
Pull out roller by the tab. Remove any string, carpet
fibers, or hair, and remove debris from the roller
housing. Wash the roller as needed, using only
water. Air-dry completely for at least 24 hours
before reinserting.
Reinsert roller by sliding it into the front of the
floor nozzle until it clicks into place.
CHECKING FOR BLOCKAGES
CLEANING BRUSHROLLS
Turn off vacuum and remove battery.
Turn off vacuum and remove battery.
Remove the hand vacuum and floor nozzle from
the wand and check the wand for blockages.
Remove the handheld vacuum from the wand
and check all intake openings to the dust cup.
BRUSHROLL
Open the brushroll garage by sliding back the release
buttons. To close, insert the tabs on the lid into the
slots on the nozzle, then press down both sides.
s h a r kc l e a n . c o m
Run scissors along the guide on the brushroll
to remove any string, hair, or debris.
s h a r kc l e a n . c o m
MAINTAINING YOUR VACUUM
MAINTAINING YOUR VACUUM
CHECKING FOR BLOCKAGES
TROUBLE SHOOTING
Vacuum turns off on its own.
Turn off vacuum and remove battery.
Remove the floor nozzle from the wand. Tilt neck of floor
nozzle back to straighten the airway to remove blockages.
There are several possible reasons for the vacuum turning off on its own, including blockages, ION Power
Pack issues, and overheating. If vacuum turns off on its own, perform the following steps:
1. C
heck LED lights on ION Power Pack to see if it needs to be recharged. If power pack does not need
charging, turn off vacuum and remove power pack.
2. Empty dust cup and clean filters (see Maintenance section).
3. Check wand, accessories, and inlet openings and remove any blockages.
4. Allow unit and ION Power Pack to cool for at least 45 minutes, until it returns to room temperature.
5. Return power pack to vacuum and press Power button.
Note: If vacuum still does not operate properly, contact Customer Service.
LED lights on ION Power Pack are flashing.
• If top 2 or bottom 2 LED lights are flashing (Fig. A, Fig. B), call Customer Service.
• B ottom LED light is flashing (Fig. C): ION Power Pack needs to be charged.
•T
op and bottom LED lights are flashing (Fig. D): ION Power Pack temperature is not optimal, so charging
is temporarily paused. Leave power pack plugged in and charging will resume soon.
TROUBLE SHOOTING
WARNING: To reduce the risk of shock and unintended operation, turn off
power and remove the ION Power Pack before servicing.
Vacuum is not picking up debris, no suction or light suction.
(Refer to Maintenance section for more information.)
Fig. A
Fig. B
Fig. C
LIGHT INDICATOR
•C
heck filters to see if they need cleaning. Follow instructions for rinsing and completely air-drying the
filters before reinserting in the vacuum.
• D ust cup may be full; empty dust cup.
• Check floor nozzle for blockages; clear blockages if required.
Fig. D
WHAT IT MEANS
FLOOR and CARPET icons alternate
illuminating
Unit temperature is high. Turn off
vacuum. While unit is cooling, look
for blockages and remove any that
are found. Filters may also need to
be cleaned.
ION POWER and ION BOOST icons
are flashing together
Blockage detected. Turn off unit and
remove blockage.
• Remove any string, carpet fibers, or hair that may be wrapped around the brushroll.
•C
heck connection between handvac and wand for blockages; clear blockages if required. If the issue
persists, please contact Customer Service.
Vacuum lifts area rugs.
• Check that vacuum is in ION POWER mode. Take care when vacuuming area rugs or rugs with delicately
sewn edges.
• Turn off the unit to disengage the brushroll and restart with the Power button.
Brushroll/Soft Roller does not spin.
• If Brushroll Indicator Light on the floor nozzle turns red, the brushroll has stopped spinning. Immediately
turn off and remove ION Power Pack from handheld vacuum and remove any blockages before
reconnecting and turning vacuum back on. If light turns green, the blockage has been successfully
cleared. If the light remains red, please contact Customer Service.
• If headlights are not illuminated, there is a connection issue between the handheld vacuum, wand, and
nozzle. Try disconnecting and reattaching the pieces. If the headlights still do not illuminate, please
contact Customer Service.
Debris caught in the brushroll. Turn
off the vacuum, then remove debris.
Brushroll Indicator Light is
flashing green
Garage door lid may not be properly
closed. Turn off the vacuum, and
ensure the lid is properly clicked into
place on both sides.
For all other issues, please call Customer Service at 1-800-798-7398.
s h a r kc l e a n . c o m
s h a r kc l e a n . c o m
FIVE (5) YEAR LIMITED WARRANTY
The 5-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC.
Warranty coverage applies to the original owner and to the original product only and is not transferable.
ION Power Pack is not covered by 5-year warranty (See battery warranty on next page).
TWO (2) YEAR LIMITED BATTERY WARRANTY
The 2-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC.
Warranty coverage applies to the original owner and to the original battery only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of 5 years
from the date of purchase when it is used under normal household conditions and maintained according to the
requirements outlined in this instruction manual, subject to the following conditions and exclusions.
SharkNinja warrants that the ION Power Pack shall be free from defects in material and workmanship for a
period of 2 years from the date of purchase when it is used under normal household conditions and maintained
according to the requirements outlined in this instruction manual, subject to the following conditions and
exclusions.
What is covered in my warranty?
What is covered in my warranty?
1.The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion,
will be repaired or replaced for up to 5 years from the original purchase date.
1.The original ION Power Pack, deemed defective, in SharkNinja’s sole discretion, will be replaced for up
to 2 years from the original purchase date.
2.In the rare event that a replacement unit is issued, the warranty coverage ends six months following the
receipt date of the replacement unit or the remainder of the existing warranty, whichever is greater. If
the unit is replaced, SharkNinja reserves the right to replace the unit with one of equal or greater value.
2.In the rare event that a replacement battery is issued, the warranty coverage for the replacement battery
ends six months following the receipt date of the replacement battery or the remainder of the existing
warranty, whichever is greater.
What is not covered in my warranty?
What is not covered in my warranty?
Our Customer Service/Product Specialists are available to provide all the warranty service options available
to you, including the possibility of upgrading to our VIP Warranty Service Options for select product categories.
Our Customer Service/Product Specialists are available to provide all the warranty service options available
to you.
1.Normal wear and tear of wearable parts such as foam filters, HEPA filters, pads etc., which require
regular maintenance and/or replacement to ensure the proper functioning of your unit are not covered
by this warranty.
1.Normal wear and tear of ION Power Pack, which requires optimal temperature storage and operation to
ensure the proper functioning of your battery, is not covered by this warranty.
2.
2.
Any battery that has been tampered with or used for commercial purposes.
3.
Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.
4.
Consequential and incidental damages.
Any unit that has been tampered with or used for commercial purposes.
3.SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A fee
of $19.95 for return shipping costs will be charged at the time of return shipment of the repaired or
replacement unit.
4.
Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.
5.
Consequential and incidental damages.
6.Defects caused by or resulting from damages from shipping or from repairs, service or alteration to the
product or any of its parts which have been performed by a repair person not authorized by SharkNinja.
7.
Products purchased, used or operated outside of North America.
Problems with your unit/How to get service
If your appliance fails to operate properly while in use under normal household conditions within the warranty
period, visit sharkclean.com for product care/maintenance self-help. Our Customer Service and product
specialists are also available at 1-800-798-7398 to assist with product support and warranty service
options.
How to initiate a warranty claim
You can call 1-800-798-7398 to have a Customer Service specialist assist you. Please note you must call
1-800-798-7398 to initiate a warranty claim. Return and Packing Instruction information will be provided at
that time.
For Customer Service hours, visit sharkclean.com.
Replacement parts are available for purchase at sharkclean.com. For more information on which parts are
classified as wearable and non-wearable, please visit sharkclean.com/warranty.
5.Defects caused by or resulting from damages from shipping or from repairs, service or alteration to the
product or any of its parts which have been performed by a repair person not authorized by SharkNinja.
6.
Products purchased, used or operated outside of North America.
Problems with your battery
If your ION Power Pack fails to operate properly while in use under normal household conditions within
the warranty period, visit sharkclean.com for product care/maintenance self-help. Our Customer Service
and product specialists are also available at 1-800-798-7398 to assist with product support and warranty
service options.
SharkNinja will cover the cost for the customer to send in the battery to us for replacement. A fee of $19.95
for return shipping costs will be charged at the time of return shipment of the replacement battery.
How to initiate a warranty claim
You can call 1-800-798-7398 to have a Customer Service specialist assist you. Please note you must call
1-800-798-7398 to initiate a warranty claim.
For Customer Service hours, visit sharkclean.com.
Replacement ION Power Packs are available for purchase at sharkclean.com/batteries.
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above
may not apply to you.
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above
may not apply to you.
s h a r kc l e a n . c o m
s h a r kc l e a n . c o m
NOTES
s h a r kc l e a n . c o m
NOTES
s h a r kc l e a n . c o m
REGISTER YOUR PURCHASE
registeryourshark.com
RECORD THIS INFORMATION
Model Number: ������������������������
Date Code: ����������������������������
TIP: You can find the model and serial
numbers on the QR code label which is
located on the bottom of the back of the
vacuum and battery.
Date of Purchase: ����������������������
(Keep receipt)
Store of Purchase: ����������������������
TECHNICAL SPECIFICATIONS
Voltage:
25.2V
Watts:
300W
Amps:
11.9A
PLEASE READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE.
This Owner's Guide is designed to help you
keep your vacuum running at peak performance.
SharkNinja Operating LLC
US: Needham, MA 02494
CAN: Ville St-Laurent, QC H4S 1A7
1-800-798-7398
sharkclean.com
Illustrations may differ from actual
product. We are constantly striving to
improve our products; therefore the
specifications contained herein are subject
to change without notice.
For SharkNinja U.S. Patent information, visit
www.sharkninja.com/USPatents
BATTERY REMOVAL AND DISPOSAL
This product uses a lithium-ion rechargeable and
recyclable battery. When the battery no longer holds
a charge, it should be removed from the vacuum and
recycled. DO NOT incinerate or compost the battery.
When your lithium-ion battery needs to be replaced, dispose
of it or recycle it in accordance with local ordinances or
regulations. In some areas, it is illegal to place spent lithiumion batteries in the trash or in a municipal solid waste stream.
Return spent battery to an authorized recycling center or to
retailer for recycling. Contact your local recycling center for
information on where to drop off the spent battery.
For more information on battery removal for disposal, please
visit sharkclean.com/batterysupport.
The RBRC™ (Rechargeable Battery Recycling Corporation)
seal on the lithium-ion battery indicates that the costs to
recycle the battery at the end of its useful life have already
been paid by SharkNinja. In some areas, it is illegal to
place spent lithium-ion batteries in the trash or municipal
solid waste stream and the RBRC program provides an
environmentally conscious alternative.
RBRC, in cooperation with SharkNinja and other battery
users, has established programs in the United States and
Canada to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and conserve
natural resources by returning the spent lithium-ion battery
to an authorized SharkNinja service center or to your local
retailer for recycling. You may also contact your local
recycling center for information on where to drop off the
spent battery, or call 1-800-798-7398.
© 2018 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC.
SHARK ION and SMART RESPONSE are trademarks of SharkNinja Operating LLC. RBRC is a trademark of Rechargeable
Battery Recycling Corporation.
IR140Series_IB_E_MP_180620
PRINTED IN CHINA

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement