Volvo S60 2020 Early Sensus Navigation

S E NS U S NAV IG AT IO N
SENSUS NAVIGATION
Sensus Navigation is a satellite based traffic information and route
navigation system.
Development work is constantly in progress to improve our product.
Modifications may mean that information, descriptions and illustra-
tions in this supplement differ from the equipment in the car. We
reserve the right to make modifications without prior notice.
TABLE OF CONTENTS
NAVIGATION
4
Symbols and buttons in the navigation system*
5
Information card in navigation system*
6
Navigation system* in centre display
6
Navigation system* in driver display
8
Activating and deactivating the
navigation system* in the driver
display
9
Navigation system* in head-up
display*
Control the navigation system*
with voice recognition
2
ALPHABETICAL INDEX
Activating and deactivating the
navigation system*
Edit or delete the itinerary
19
Show an alternative route
20
Showing POIs along a route
20
Showing guidance points in the
itinerary
21
Traffic disruptions on the map
21
Showing traffic congestion along
route
22
22
9
Select a detour in the navigation
system*
Real Time Traffic Information
23
9
Activating and deactivating Real
Time Traffic Information
24
Navigation system settings*
24
Map settings
25
Command list for voice control of
the navigation system*
12
Enter destination directly on map
13
Settings for route and road navigation
25
Specifying a destination with an
address
14
Traffic settings
26
Specify destination with free text
searching
14
Specify destination with point of
interest
15
Specifying a destination with latest/favourites/library
Specify destination with Send to Car
Map updates
27
Updating maps via computer and
USB
28
Updating maps from an online car
31
16
Frequently asked questions about
the navigation system*
32
18
Navigation license agreements*
33
Itinerary
18
Copyright for the navigation system*
36
Show itinerary
19
Alphabetical Index
37
NAVIGATION
NAVIGATION
Activating and deactivating the
navigation system*
Show the map image in the centre display by
tapping on the top tile (1) on the home view.
The navigation system is activated automatically when the driver's door is opened and is
deactivated only when the driver leaves the
car and locks it.
If the centre display does not show the navigation system tile – press briefly once on the
home button (2) and then tap on the navigation system (1) tile.
Activating navigation
Then a map of the current area is shown with
the car symbolised by a blue triangle.
Deactivating navigation
The navigation system cannot be switched off
but always works in the background - it is only
switched off when the driver locks and leaves
the car.
NOTE
The navigation system is also available
when the engine is switched off. When the
battery level gets too low the system
switches off.
Press on this symbol to show
the map image across the
entire centre display.
Related information
WARNING
Observe the following.
•
Direct all your attention to the road and
make sure that all your concentration is
on driving.
•
Follow applicable traffic legislation and
drive with good judgment.
•
Due to weather conditions or time of
year affecting the road conditions,
some recommendations may be less
reliable.
•
Navigation system* in centre display
(p. 6)
•
Navigation system* in driver display
(p. 8)
•
Navigation system* in head-up display*
(p. 9)
•
Control the navigation system* with voice
recognition (p. 9)
•
Symbols and buttons in the navigation
system* (p. 5)
Navigation system tile
Home button
4
* Option/accessory.
NAVIGATION
Symbols and buttons in the
navigation system*
The map in the centre display shows symbols
and colours providing information about various roads and the area around the car and
the route. A tool bar with different buttons for
different settings is to the left.
Distance to destination
Cancels guidance
Compass/changes between north and
travel direction up
Shows list of the itinerary's points of interest (POI1) and traffic information
Starting
Next manoeuvre
Destination/final destination
Itinerary and Alternative route
Changes map display between 2D and 3D
Destination/final destination
Reset the map to follow the car
Point of interest (POI1)
Traffic information
Minimises (expanded view) or maximises
the map image (full screen)
Car on planned route
Related information
•
Information card in navigation system*
(p. 6)
•
•
•
Traffic disruptions on the map (p. 21)
Real Time Traffic Information (p. 23)
Showing traffic congestion along route
(p. 22)
Minimises the tools field
Repeat the current voice guidance
Minimises the tools field
Calculate detour
Voice guidance temporarily On/Off
Shows list with the itinerary's guidance
points
Symbols and buttons on the map
Arrival time/remaining travel time
1
Specifying destinations/intermediate destinations
Point of Interest
* Option/accessory.
5
NAVIGATION
Information card in navigation
system*
All map icons, such as destination, interim
destination and saved favourites, have an
information card that opens after tapping the
icon.
Pressing on the information card shows a
small card, two presses show a larger card
with more information. The information card's
content and options vary depending on the
type of icon.
•
Showing POIs along a route (p. 20)
Navigation system* in centre
display
The navigation system is presented and operated in several different ways, e.g. via the
centre display.
With, for example a marked point of interest
(POI2), the driver can select:
• Start navigation - the position is saved as
a destination
• Add as waypoint - the position is saved
as an intermediate destination (only displayed at the specified destination)
• Save - the position is saved in the library
• Remove from itinerary - the position is
removed if it is included in the itinerary
• Nearby POI - points of interest when the
car's position appears
Related information
•
•
Itinerary (p. 18)
Specify destination with point of interest
(p. 15)
2 Point
6
All settings for the navigation system are
defined via the centre display. Here, the driver
sets how the map is to be displayed or enters
a destination.
of Interest
* Option/accessory.
NAVIGATION
If the map image is not shown in the centre
display – tap on the top tile (for the navigation
system).
Where am I?
What geographic position does the car have
now?
•
Press the map's car symbol (blue triangle)
- the information is shown directly on the
map.
Find the car symbol on the map
After zooming in and out and moving
around on the map, it can sometimes
be hard to find your way back to the
position of the car. Press the crosshairs to reset the map to follow the car symbol.
North or direction of travel upwards on
the map
There are two ways of showing the
car's movement in relation to the
map. Press the symbols to switch
between having north or the direction of travel upwards on the map.
When the map is shown with north
upwards, the car symbol moves in
the current compass direction on the map. If
the car symbol moves to the left on the map,
the car is driving westwards.
When the car symbol is pointing upwards, the
map rotates under the car symbol, depending
on how the car is turning. The compass symbol points towards north (N) on the map, and
the centre of the compass shows the direction
in which the car is pointing:
Compass symbols
Compass direction
N
North
NE
Northeast
E
East
SE
Southeast
S
South
SW
Southwest
W
West
NW
Northwest
2D or 3D display
Tap on the symbols to shift between
2D and 3D display.
For 3D display, the car's direction of travel is
always shown upwards. The map rotates
under the car symbol, depending on how the
car is turning. The compass symbol indicates
which direction north is (N) on the map, and
the centre of the compass shows the direction
in which the front of the car is pointing. The
map scale is not shown in 3D mode.
For 2D display, the map is shown with north
upwards, and the car symbol moves in the
current compass direction on the map.
Zoom in
Make the map larger by tapping the centre
display twice in quick succession or by placing
two fingers on the centre display and separating them outwards.
Zoom out
Zoom out from the map by tapping once with
two fingers on the centre display or dragging
two fingers together on the centre display.
Scroll
Place one finger on the map, swipe in the
desired direction, and release. The scroll function is only possible with the map maximised,
not minimised.
Switching heading display
Maximise the map and press on the map
heading at the top of the centre display.
}}
7
NAVIGATION
||
Choose between the following displays as the
heading on the map:
Navigation system* in driver
display
1.
The navigation system is presented and operated in several different ways, e.g. via the
driver display.
Destination Destination, arrival time (ETA)
or remaining travel time (RTA) and distance to destination (Distance). To select
ETA or RTA, see the section "Settings for
route and road navigation".
2. Current position as address (Address) or
as coordinates (Coordinates). When coordinates are shown, altitude is also shown
(Altitude). To choose between address
and coordinates, see section "Map settings".
Opening/closing the menu. The menu is
closed automatically after a period of inactivity or with certain options.
Related information
•
•
Navigation system settings* (p. 24)
Navigation system* in driver display
(p. 8)
•
Navigation system* in head-up display*
(p. 9)
•
Settings for route and road navigation
(p. 25)
•
Map settings (p. 25)
Browsing between menus.
The map is only shown in the 12" driver display.
Browsing between menu options.
During driving the driver is guided by voice
guidance and instructions on the driver display. Map display in the driver display can also
be activated without a set destination.
Confirm or highlight an option.
The right-hand steering wheel keypad
and the driver display
The right-hand steering wheel buttons can be
used to manage some of the functions in the
navigation system, e.g. Take me home and
Cancel guidance. If a message is shown the
driver display, it must first be acknowledged
or dismissed for the menu to be shown.
8
Related information
•
Activating and deactivating the navigation
system* in the driver display (p. 9)
•
•
Navigation system* in centre display (p. 6)
Navigation system* in head-up display*
(p. 9)
* Option/accessory.
NAVIGATION
Activating and deactivating the
navigation system* in the driver
display
The navigation system is shown automatically in the driver display when a destination
is set. The navigation system can also be
shown without specifying a destination.
1. Drag down the centre display's top view.
Navigation system* in head-up
display*
Control the navigation system*
with voice recognition
The navigation system is presented and operated in several different ways, e.g. via the
head-up display.
If your car is equipped with Sensus
Navigation you can use voice control to give
spoken commands in order to control parts of
your navigation system.
Start navigation
Here you can find an introduction on how to
start to use voice control in order to control
the navigation system in the car.
2. Press Settings.
3. Press My Car Displays
Display Information.
Driver
To activate a navigation command
4. Press the radio button Show Map to
show the navigation system in the driver
display without an entered destination.
Related information
•
Navigation system* in driver display (p. 8)
–
Navigation system on windscreen.
The driver can receive guidance and information from the navigation system in the head-up
display at the bottom of the windscreen.
Whether or not the navigation system should
be shown in the head-up display can be set, as
well as the position of the information field.
Related information
•
•
Navigation system* in centre display (p. 6)
Navigation system* in driver display (p. 8)
Press the voice recognition button on the
steering wheel
.
> You can now give commands, e.g.
"Navigation" that start a navigation
dialogue and show examples of commands.
Use voice control to get directions to
an address
To get directions to a specific address, use the
spoken command Go to followed by the
address. The order in which the address is
given is important. To get directions to an
address via voice control, the address must be
given in the following order: (1) street address;
(2) street number; (3) city; according to the
following example:
}}
* Option/accessory.
9
NAVIGATION
||
1.
Give the Go to command.
> Now you can give the address you
want directions to.
2. Give the street address, e.g. "King Street"
3. Give the street number, e.g. "Five"
4. Give the city, e.g. "Gothenburg"
> In this case, the combined command
will then be: "Go to King Street Five,
Gothenburg". Provided the address is
found in the system, you will now get
directions to the address via your navigation system.
Use voice control to get directions to an
address in another country or another
county
Your navigation system installs sets of maps
for the country or county where the car recognises its location. This means that in order to
get correct directions across country or county
borders, you need to first tell the system the
country or county in which your desired destination address is located. You do this by using
the Change country or Change state command. (The Change state command is primarily used in USA. The Change country
command is used in the example below.)
3 Point
10
Of Interest
1.
Give the Change country command.
> Now you can give the country for the
address to which you want directions,
e.g. "Sweden".
2. Now give the address to which you want
directions by following the same procedure as in "Use voice control to get directions to an address" above.
> In this scenario, the combined command will be divided into 2 subcommands:
1. "Change country, Sweden"
2. "Go to King Street Five, Gothenburg"
Provided the address is found in the
system, you will now get directions to
King Street Five, Gothenburg, Sweden,
via your navigation system
NOTE
After changing country, try to pronounce
the address you want directions to in the
language of the destination country. This is
necessary since the system's recognition
changes automatically to the language of
the selected country.
Use voice control to get directions to
an address given as Home position
If you have given an address in your navigation
system as a Home position, you can use a
spoken command to get directions to the
position.
–
Give the Take me home command.
> If the navigation system has a home
position saved, you will now get directions to the position.
Use voice control to get directions to a
place, shop or other specific business
without giving an exact address
You can use your navigation system to get
directions to special places or a specific type
of business, so-called points of interest (POI3).
Examples of points of interest are, for example, restaurants, hotels, petrol stations, museums or sights and landmarks.
You use the Search command to search for a
point of interest. You can search for both a
specific point of interest as well as point of
interest categories.
NAVIGATION
NOTE
It is important which command you
choose to use for obtaining directions to
different alternatives. Please note that
when you want directions to a point of
interest, use the Search command. This is
different from when you want directions to
specific addresses. Then the Go to command must be used instead.
Search for a specific place or business
[POI name] here refers to a specific place or
business, a so-called point of interest, e.g. a
hotel, a restaurant, a municipal park, etc.
1.
Give the Search command.
> Now you can specify a specific point of
interest you want directions to.
2. State [POI name], e.g. "Castle Forest"
> In this case, the combined command
will then be: "Search Castle Forest".
Provided the place is found in the system, you will now get directions to the
place via your navigation system.
Search for a point of interest category e.g.
shops, hotels, restaurants, museums or
other sights and landmarks or businesses
[POI category] here refers to specific types
of place or business, so-called points of interest, e.g. hotels, restaurants, museums, etc.
1.
Give the Search command.
> Now you can specify the type of point
of interest you want to find and get
directions to.
2. State [POI category], e.g. "restaurant"
> In this case, the combined command
will then be: "Search restaurant". The
navigation system will now search for
restaurants located near and around
the car, which results in a list in your
driver display. The list that appears consists of suggestions the system has
produced based on your command.
Categories and close results are at the
top, and the lower the relevance a suggestion is deemed to have, the lower
down the list it appears.
Since you are looking for a category in
this example, it may be a good idea to
choose the category option closest to
your search.
Use voice control to stop directions
If you want to stop directions and all of the
intermediate destinations and the final destination, this can be done with a spoken command.
–
Give the Clear itinerary command.
> The navigation system stops the directions and deletes all of the intermediate
destinations and the final destination
along the travel itinerary.
How to give postcode and house
number
The number commands are stated differently
depending on the function to be controlled:
•
Postcodes must be spoken individually,
number by number, e.g. zero three one
two two four four three (03122443).
•
House numbers can be spoken individually or in groups, e.g. two two or twentytwo (22). It is also possible to state them
with hundreds, e.g. 19 hundred 22 (1922).
For English and Dutch, several groups can
be said in sequence, e.g. twenty-two
twenty-two (22 22). For English, double
or triple can be used, e.g. double zero
(00). Numbers can be given within the
range 0-2300.
3. Select the category most appropriate for
your search target in the list, in this case
"restaurant(s)", by speaking the number of
the row in which the option appears in the
driver display.
> Now you can see your search results
and select an option that suits you.
Related information
•
Command list for voice control of the navigation system* (p. 12)
* Option/accessory.
11
NAVIGATION
Command list for voice control of
the navigation system*
Several navigation system functions can be
activated with voice commands. A list of
them follows below.
Press
on the right-hand keypad on the
steering wheel and say one of the following
commands:
•
“Navigation” - Initiates a navigation dialogue and shows examples of commands.
•
"Take me home" - Guidance is given to
the Home position.
•
"Go to [City]" - Specifies a city as a destination. Example "Drive to London".
•
"Go to [Address]" - Specifies an address
as a destination. An address must contain
city and street. Example "Drive to 5 King's
Road, London".
•
"Add intersection" - Starts a dialogue
where two streets must be specified. The
intersection point of the specified streets
then becomes the destination.
•
"Go to [Post code]" - Specifies a post
code as a destination. Example "Drive to 1
2 3 4 5".
•
"Go to [contact]" - Specifies an address
from the phone book as a destination.
Example "Drive to Robyn Smith".
•
•
"Search [POI category]" - Searches for
adjacent points of interest (POI) within a
certain category (e.g. restaurants)4. To
have the list sorted along the route - say
"Along the route" when the results list is
shown.
"Search [POI category] in [City]" Searches for points of interest (POI)
within a certain category and city. The list
of results is sorted according to the city's
central point. Example "Search for restaurant in London".
•
"Search [POI name]". Example "Search
Kielder Forest".
•
"Change country/Change state5,6" Changes the search area for navigation.
•
"Show favourites" – Shows saved positions in the driver display.
•
"Clear itinerary" - Erases all the stored
intermediate destinations and final destination in an itinerary.
•
"Repeat voice guidance" - Repeats the
last spoken guidance.
•
"Turn off voice guidance" - Switches off
voice guidance.
•
"Turn on voice guidance" - Starts the
switched-off voice guidance.
The following commands can generally be
used, regardless of the situation:
•
"Repeat" - repeats the last voice instruction in the ongoing dialogue.
•
"Help" - starts a help dialogue. The system replies with the commands available
in the current situation, a prompt or an
example.
•
It is possible to stop voice recognition
both when the system is silent and when
it is speaking.
• "Cancel" – stops the dialogue when
the system is silent.
•
Give a long press on
until two
beep tones are heard – the dialogue
stops, even if the system is speaking.
4 The user has the option of calling the POI or specifying it as a destination.
5 In European countries, “Country” is used instead of “State”.
6 For Brazil and India, the search area is changed via the centre display.
12
* Option/accessory.
NAVIGATION
Addresses
When an address is entered, the search area is
defined as the search area preset in the navigation system. It is possible to switch to a different search area. If the new search area uses
a different language to the selected system
language, the system will automatically switch
to a different recognition engine. Therefore,
state the address in the language used in the
new search area.
NOTE
Note that addresses can only be searched
for the country or state that the navigation
system is preset for. To search for
addresses in another country or state you
first need to change search area.
Related information
•
Control the navigation system* with voice
recognition (p. 9)
Enter destination directly on map
A destination can be specified in different
ways in the navigation system* – marking a
point on the map with your finger is one of
them.
In many cases it is simplest to scroll to the
desired position on the map and tap it with
your finger.
1.
Check that the map view is in max mode.
•
Specify destination with point of interest
(p. 15)
•
Specifying a destination with latest/
favourites/library (p. 16)
•
Specify destination with Send to Car
(p. 18)
•
Settings for route and road navigation
(p. 25)
2. Scroll the map until the desired position is
in view.
3. Press and hold the position - an icon is
created and a menu opens.
4. Select Go here - guidance starts.
Delete the icon.
To erase the icon from the position:
•
Select Delete
Adjust the position of the icon
To adjust the position of the icon:
•
Tap and hold the icon, drag it to the
desired position, and release.
Related information
•
•
•
Itinerary (p. 18)
Specifying a destination with an address
(p. 14)
Specify destination with free text searching (p. 14)
* Option/accessory.
13
NAVIGATION
Specifying a destination with an
address
A destination can be specified in different
ways in the navigation system* - selecting an
address is one of them.
1. When the map is shown, expand the tools
field using the down arrow on the lefthand side and press Set dest.
> The map image changes to free text
searching.
2. Press Address.
3. All fields do not need to be filled in. For a
journey to a city, for example, it is sufficient to enter just the country and city.
Guidance is then given to the city's centre.
4. Select one of the available text field
options and type using the centre display
keyboard:
•
•
•
•
•
Country/State/Province
City/Territory/Postcode
Related information
•
•
•
Itinerary (p. 18)
Enter destination directly on map (p. 13)
Specify destination with free text searching (p. 14)
•
Specify destination with point of interest
(p. 15)
•
Specifying a destination with latest/
favourites/library (p. 16)
•
Specify destination with Send to Car
(p. 18)
•
Settings for route and road navigation
(p. 25)
•
Information card in navigation system*
(p. 6)
Specify destination with free text
searching
A destination can be set in different ways in
the navigation system* - with free text
searching, for example, a search can be made
using phone numbers, postcodes, streets,
cities, coordinates and points of interest
(POI8).
The keyboard in the centre display can be
used to type most characters and to search for
destinations.
1.
When the map is shown, expand the tools
field using the down arrow on the lefthand side and press Set dest.
> The map image changes to free text
searching.
2. Enter a search term in the search box or
first limit the hits by selecting a filter.
> Search hits are shown while characters
are being entered.
Address
Number
Junction
7 Only applies to certain
8 Point of Interest
14
For cars with Volvo On Call* it is also possible
to send addresses and destinations to the
car's navigation system via the Volvo On Call
app and a Volvo On Call service centre7.
markets.
* Option/accessory.
NAVIGATION
3. If the search gives the desired result –
tap on a search hit to show its information
card and select to continue to use the
search hit.
If the search gives too many results –
tap on Advanced filter and select position to search around, and then select to
continue to use the search hit:
• Around car
• Around destination - only shown if a
destination is entered.
• Along route - only shown if a destina-
58,1234N 12,5678E (with the point of the
compass after the coordinate)
58,1234-12,5678 (with hyphen without
point of the compass)
You can use a comma [,] instead of a full stop
[.] if you prefer.
Coordinates
A destination can also be specified with map
coordinates.
•
Type, for example, “N 58.1234 E
12.5678” and tap Search.
The points of the compass N, E, S and W can
be entered in different ways, e.g. in accordance with the following:
N 58,1234 E 12,5678 (with spaces)
N58,1234 E12,5678 (without spaces)
9 Point
A destination can be specified in different
ways in the navigation system* - selecting a
point of interest (POI9) is one of them.
1. When the map is shown, expand the tools
field using the down arrow on the lefthand side and press Set dest.
Related information
•
•
•
tion is entered.
• Around point on map
Specify destination with point of
interest
•
Itinerary (p. 18)
Enter destination directly on map (p. 13)
Specifying a destination with an address
(p. 14)
Specify destination with point of interest
(p. 15)
•
Specifying a destination with latest/
favourites/library (p. 16)
•
Specify destination with Send to Car
(p. 18)
•
Settings for route and road navigation
(p. 25)
> The map image changes to free text
searching.
2. Press POI.
3. Tap on the desired filter (some options
only show a set destination or intermediate destination):
•
•
•
•
•
Near the car
Near the destination
Close intermediate destinations
Along route
Around point on map
4. Search for and select desired point of
interest.
> The information card is displayed.
}}
of Interest
* Option/accessory.
15
NAVIGATION
||
5. Select Start navigation or Add as
waypoint.
•
Specify destination with free text searching (p. 14)
Specifying a destination with
latest/favourites/library
Many POIs (e.g. restaurants) have subcategories (e.g. fast food).
•
Specifying a destination with latest/
favourites/library (p. 16)
In the settings for the map you can change
which POIs should be shown on the map.
That setting does not affect searching for POI
as destination - even excluded POIs are
shown as alternative destinations.
•
Specify destination with Send to Car
(p. 18)
•
Map settings (p. 25)
A destination can be specified in different
ways in the navigation system* - selecting
from a list is one of them.
1. When the map is shown, expand the tools
field using the down arrow on the lefthand side and press Set dest.
Certain POIs are first shown on the map when
the scale is 1 km (1 mile).
NOTE
•
The symbol for a POI and the number
of POIs varies between different markets.
•
New symbols may appear and others
disappear after a map data update.
You can browse the menu system to
find all the symbols used in the current
map system.
> The map image changes to free text
searching.
2. Then select one of the following lists, at
the top of the screen:
• Recent
• Favourites
• Library
After one alternative in a list has been marked,
it is added as a destination by using either the
Start navigation button or the Add as
waypoint button.
Related information
•
•
•
16
Itinerary (p. 18)
Enter destination directly on map (p. 13)
Specifying a destination with an address
(p. 14)
* Option/accessory.
NAVIGATION
Last
Previous searches are listed here. Scroll and
select.
Also available as a menu option in the driver
display and can be viewed using the righthand keypad on the steering wheel.
Using Edit, one or more items in the list can
be deleted.
Favourites
The positions from Library that are flagged as
favourites are collected in this list. Scroll and
select.
A position erased from Favourites remains in
the Library, but then with an "extinguished"
star. To add a position in Favourites, go to
Library and select the relevant position's asterisk again.
A frequently used destination can be programmed and used with Set Home address.
An entered Home destination is also available
as a menu option in the driver display and can
be viewed using the right-hand keypad on the
steering wheel.
Using Edit, one or more items in the list can
be deleted.
Library
Saved positions and itineraries are collected
here. The most recently saved appear uppermost on the list.
•
Specifying a destination with an address
(p. 14)
•
Specify destination with free text searching (p. 14)
Deleting a position in Library will also remove
it from Favourites.
•
Specify destination with point of interest
(p. 15)
The library can be sorted in various ways:
•
Specify destination with Send to Car
(p. 18)
•
Settings for route and road navigation
(p. 25)
Tap on a position's star to select/deselect it as
a favourite. A position with a highlighted/filled
star is also listed under the Favourites heading.
Added - sorts in chronological order.
•
• Name - sorts in alphabetical order.
• Distance - sorts in distance from current
position.
•
Received - positions sent to the car using
Send to Car are filtered out. New positions
that have not been read have a BLUE cursor which is extinguished when the positions have been read.
Using Edit, one or more items in the list can
be deleted.
To edit a saved position in Library, highlight
the position in the list and select Edit
position. For example, it is possible to change
the name of the position, move it on the map
by dragging and dropping, and add phone
number or email address.
Related information
•
•
Itinerary (p. 18)
Enter destination directly on map (p. 13)
17
NAVIGATION
Specify destination with Send to
Car
A destination can be specified in different
ways in the navigation system* – using the
Send to Car function is one of them.
Send position to the car
Send to Car is a function that makes it possible to add a destination/position to the car's
navigation system using a computer.
Send to Car can also be used from the Volvo
On Call* app.
To use Send to Car requires a Volvo ID to be
registered to the car.
An example of a map service provider where
Send to Car can be used is wego.here.com
Receiving and using a position in the
car
Using a saved position
Positions received are saved to the navigation
system's library and can be used later.
Related information
•
•
•
Itinerary (p. 18)
Enter destination directly on map (p. 13)
Specifying a destination with an address
(p. 14)
•
Specify destination with free text searching (p. 14)
•
Specify destination with point of interest
(p. 15)
•
Specifying a destination with latest/
favourites/library (p. 16)
•
Settings for route and road navigation
(p. 25)
Itinerary
The itinerary is the route suggested in the
navigation system* when the user has
entered a destination.
The first defined position will be the itinerary's
destination.
The subsequent positions will be the itinerary's intermediate destinations.
An itinerary, its destination and intermediate
destinations can easily be edited afterwards.
Related information
•
•
•
•
Show itinerary (p. 19)
Edit or delete the itinerary (p. 19)
Show an alternative route (p. 20)
Showing guidance points in the itinerary
(p. 21)
For the car to be able to receive data it must
be connected to the Internet. If the position is
sent to the car with Volvo On Call then the
car's built-in modem is used to receive the
data, i.e. no separate Internet connection is
required.
1.
When a position has been received by the
car a notification is shown in the centre
display. Tap on the notification/symbol.
> An information card is opened.
2. Select the desired use of the position.
18
* Option/accessory.
NAVIGATION
Show itinerary
Edit or delete the itinerary
2.
It is possible to show the itinerary in the navigation system* during road navigation.
Tap on the symbol for Itinerary to open
the itinerary.
It is possible to remove intermediate destinations or the entire itinerary in the navigation
system* while guidance is in progress.
1. Expand the tools field with the down
arrow first and then with the three points.
2.
Related information
•
•
•
Edit or delete the itinerary (p. 19)
Show an alternative route (p. 20)
Showing guidance points in the itinerary
(p. 21)
Tap on the symbol for Itinerary to open
the itinerary.
3. Tap on the recycle bin to delete an intermediate destination in the itinerary, or tap
on Clear itinerary to delete the whole
itinerary.
Related information
•
•
•
1.
During guidance, expand the tools field
with the down arrow and then the three
points.
Show an alternative route (p. 20)
Showing POIs along a route (p. 20)
Showing guidance points in the itinerary
(p. 21)
* Option/accessory.
19
NAVIGATION
Show an alternative route
It is possible to search for alternative routes
in the navigation system* while guidance is in
progress.
1. Expand the tools field with the down
arrow first and then with the three points.
•
Settings for route and road navigation
(p. 25)
Showing POIs along a route
A list of points of interest (POI10) along the
route can be presented in the navigation system*.
2.
1.
Tap on the symbol for Itinerary to open
the itinerary.
3. Press Alternative routes.
4. Select an alternative route:
• Eco
• Fast
• Scenic
5. Tap on the map.
> The updated route is then shown on the
map and guidance resumes.
Press Ahead.
2. Press POI.
> POIs along the route are shown based
on distance.
3. When several POIs are in the same location they are shown as a group. Tap on the
group to list POIs.
4. Select a POI.
5. Select one of the information cards alternatives and follow the instructions.
Related information
•
Information card in navigation system*
(p. 6)
•
Map settings (p. 25)
Related information
•
•
•
20
Edit or delete the itinerary (p. 19)
Showing traffic congestion along route
(p. 22)
Select a detour in the navigation system*
(p. 22)
* Option/accessory.
NAVIGATION
Showing guidance points in the
itinerary
A list of the itinerary's future guidance points
helps the driver to plan upcoming manoeuvres in good time.
Show a list of turns ahead in the itinerary in
the navigation system* by:
1.
Expanding the tools field using the down
arrow on the left-hand side.
2. Expanding the tools field further with the
three points.
3. Tap on the symbol for Turn-by-Turn (see
illustration).
A list of the itinerary's guidance points is
shown instead of the tools field (the list can be
scrolled through). Pressing the arrow pointing
left minimises the list.
The next guidance point is always placed at
the top of the list.
The position is shown on the map by
pressing one of the list's guidance
points. A subsequent tap on the
crosshairs symbol (see illustration)
resets the map to the guidance view, where
the map follows the car.
10
Traffic disruptions on the map
The navigation system* receives information
about traffic events and traffic congestion
and shows them on the map.
NOTE
Traffic information is not available in all
areas/countries.
Coverage areas for traffic information are
being increased continuously.
You can set which traffic-related information
should be shown on the map.
Traffic disruptions, such as heavy and slowmoving traffic, roadworks and accidents, are
indicated by different symbols if the map has
been zoomed in enough.
Roadworks appear as follows. When
disturbances are more severe, their
extent is also shown with a red line
along the side of the road. The line
indicates at the same time in which travel
direction the disturbance applies - if the disturbance is in both directions the road section
is marked with a line on both sides.
Information on traffic disruptions
– Tap on the symbol for traffic disruptions.
> An information card is shown. The
information can describe for example
the position of the disturbance with the
street name or road number, and the
disturbance's nature, extent or duration.
Avoid traffic disruptions
If there is traffic congestion along the route,
the alternative Avoid can be selected. The system then calculates an alternative route.
Real Time Traffic Information11
If the car is connected to the Internet, Real
Time Traffic Information can also be received
with RTTI12.
Related information
•
•
•
•
•
Traffic settings (p. 26)
Map settings (p. 25)
Showing traffic congestion along route
(p. 22)
Real Time Traffic Information (p. 23)
Information card in navigation system*
(p. 6)
Point of Interest
* Option/accessory.
21
NAVIGATION
Showing traffic congestion along
route
A list of traffic disruptions along the route can
be produced when a destination is set in the
navigation system*.
1. When the map is shown, expand the tools
field on the left-hand side with the down
arrow and then with the three points.
Press Ahead.
3. Press Traffic. The Traffic button is grey if
there is no traffic event on the route.
> Any traffic events along the route are
shown based on distance.
4. If more information about the traffic disruption is required, tap on the row and an
information card is opened. Select one of
the information cards alternatives and follow the instructions.
5. Tap on Avoid to avoid the traffic disruption.
> The route is recalculated and guidance
is given via the alternative route.
22
Traffic disruptions on the map (p. 21)
•
•
•
Traffic settings (p. 26)
•
Real Time Traffic Information (p. 23)
Information card in navigation system*
(p. 6)
Select a detour in the navigation
system*
If the driver wants to avoid the nearest segment of a route, e.g. because the road is
closed, a detour can be selected.
1. Expand the tools field on the left-hand
side with the down arrow and then with
the three points.
2.
2.
11
12
Related information
Press the symbol for Detour to show an
alternative route with information about its
longest/shortest route as well as calculated journey time. Normally only a short
detour is proposed which quickly rejoins
the original itinerary.
3. If the suggestion is accepted: Tap on the
sign with detour information. The route is
accepted even if you are driving on the
road suggested. After the proposal is
accepted, guidance is resumed - now with
the detour selected as the route. If the
suggestion is not accepted continue to
drive on the original route.
Only applies to certain markets.
Real Time Traffic Information
* Option/accessory.
NAVIGATION
An alternative to the Detour function is to
diverge from the itinerary's route - the system
then updates the route automatically and continues guidance to the destination along the
most suitable route.
It is also possible to show an alternative route
while driving continues.
Related information
•
Show an alternative route (p. 20)
Real Time Traffic Information13
When the car is connected to the Internet,
the driver can access extended traffic information (RTTI14) concerning congestion,
closed roads and anything else that may
affect the travelling time.
If the RTTI service has been activated, information on traffic incidents and traffic flow will
be retrieved constantly from an Internet service. When a car requests traffic flow information, anonymous data about the traffic flow at
the car's position is provided at the same time,
which contributes to the function of the service. The anonymous data is only sent when
RTTI is activated. No data is provided if this
service is not activated.
The service may need to be activated again,
e.g. after certain software updates, after workshop visits or when creating a new driver profile.
Current traffic conditions are shown in the
navigation system* for motorways, major
roads and extra-urban roads, as well as certain
intercity routes.
Text and symbols on the map are shown as
usual and the traffic flow shows how quickly
the traffic is moving on a road compared with
the road's speed limit. The traffic flow is
shown on the map on each side of the road
with one coloured line per travel direction:
•
•
•
•
Green - no disruptions.
Orange - slow traffic.
Red - congestion/traffic jam/accident.
Black - road closed.
NOTE
Traffic information is not available in all
areas/countries.
Coverage areas for traffic information are
being increased continuously.
Related information
•
Activating and deactivating Real Time
Traffic Information (p. 24)
The amount of traffic information shown on
the map depends on the distance to the car
and is only shown within approximately
120 km (75 miles) from the car's position.
13
14
Applies to certain markets.
Real Time Traffic Information
* Option/accessory.
23
NAVIGATION
Activating and deactivating Real
Time Traffic Information15
With the car connected to the Internet, the
driver can access real time traffic information
(RTTI16) in the navigation system*.
RTTI is activated and deactivated as follows:
1.
Tap on Settings in the centre display's
top view.
2. Press Navigation
Traffic.
3. Select Real Time Traffic Information to
activate (replaces normal traffic information with RTTI) or deactivate RTTI.
4. One pop-up window with the heading
Terms and conditions and one with the
heading Data sharing are shown if it is
the first time RTTI is used.
If the car's Internet connection is disconnected when RTTI is activated then the normal
traffic information will be activated automatically. RTTI is reactivated when the Internet
connection is reconnected.
2. Press Navigation Traffic and uncheck
Show Free Flowing Traffic.
Related information
•
•
Real Time Traffic Information (p. 23)
Traffic settings (p. 26)
Navigation system settings*
Settings are selected here to define how the
route and other information should be presented in the navigation system.
Settings
Navigation
Settings can be made within the following
areas:
• Map - manage map content and appearance.
• Route and Guidance - manage guidance
and route display and calculation.
• Traffic - manage information about traffic
disruptions.
Related information
•
•
•
Map settings (p. 25)
Settings for route and road navigation
(p. 25)
Traffic settings (p. 26)
Deactivate the green line
To stop displaying the green lines that show
that traffic is flowing with no problems:
1.
15
16
24
Press Settings in the top view.
Applies to certain markets.
Real Time Traffic Information
* Option/accessory.
NAVIGATION
Map settings
• Auto - the system switches between Day
Settings are selected here to define how the
map is to be displayed in the navigation system*.
Settings
Navigation
Map
Settings can be made within the following
areas:
•
•
•
•
•
Position Format
Map Display Format
Show Speed Cameras
Show Favourites
Point of Interest (POI)
Position format
Position Format is used to choose whether
the current position should be named/shown
with its address or its coordinates:
• Address
• Coordinates and altitude
Map design
Map Display Format is used to choose how
the map's colours should be shown:
• Day - bright colours.
• Night - dark colours so as not to interfere
with night vision.
17
18
and Night depending on the light in the
passenger compartment.
Speed
cameras17
Show Speed Cameras - indicate whether
speed cameras should be shown on the map.
Favourites
Settings for route and road
navigation
Settings are selected here to define how the
route is to be calculated and the road navigation presented in the navigation system*.
Settings Navigation
Guidance
Route and
Choose whether or not Favourites shall be
shown on the map.
Settings can be made within the following
areas:
Point of interest (POI18)
•
•
•
•
•
•
The POIs to be shown on the map are indicated under Point of Interest (POI). Tap the
desired category, e.g. "Transportation", and
then select to show all or specific sub categories. Exit the menu by pressing Back or Close.
Related information
•
•
Arrival Time Format
Voice Guidance Level
Choose Default Route Type
Route Learning
Avoidance Settings
Suggest Petrol Station
Navigation system settings* (p. 24)
Time format
Settings for route and road navigation
(p. 25)
Select how arrival time should be specified:
•
•
•
Traffic settings (p. 26)
•
• ETA19 (estimated time of arrival at destination)
Showing POIs along a route (p. 20)
•
Specify destination with point of interest
(p. 15)
The times shown apply to the time zone of the
destination.
Specifying a destination with latest/
favourites/library (p. 16)
Level for voice guidance
1.
RTA20 (remaining time to arrival)
Press Voice Guidance Level.
The function is not available in all markets.
Point of Interest
}}
* Option/accessory.
25
NAVIGATION
||
2. Tap on the voice guidance required:
• None (no automatic voice guidance but
the possibility of manually requesting
current voice guidance once)
• Low (only one message per guidance
point)
• Medium (up to 3 messages per guidance point, with limited information)
• Full (up to 4 messages per guidance
point and all available information)
Standard route types
Select the standard type of route preferred:
• Fast
• Eco
• Scenic (motorways are avoided as far as
possible, so the journey time may be long)
It is also possible to show an alternative route
while driving continues.
Route learning
Select Route Learning if data collection to
optimise route calculation should be permitted.
Avoid
Press Avoidance Settings to open a menu
with different options that can be avoided
19
20
26
automatically, if possible, when calculating
route. For example, select tunnels, areas with
congestion charge and ferries.
Suggestions for petrol stations
Press Suggest Petrol Station to activate or
deactivate suggestions for nearby petrol stations in the driver display when the fuel level is
low.
Related information
•
•
•
•
Navigation system settings* (p. 24)
Map settings (p. 25)
Traffic settings (p. 26)
Show an alternative route (p. 20)
Traffic settings
Settings are selected here to define how traffic information is displayed in the navigation
system*.
Settings
Navigation
Traffic
Settings can be made within the following
areas:
•
•
•
•
Show and Handle Traffic Events
Avoid Traffic Events
Show Free Flowing Traffic
Real Time Traffic Information
Show traffic events
Select whether traffic events should be shown
on the map and used for route calculation:
• None
• Major
• All
Avoid traffic incidents
Select whether traffic incidents should be
avoided when calculating a route:
• Never
• Ask (any suggestions for route changes
are given during the journey)
• Always
Estimated Time of Arrival
Remaining Time to Arrival
* Option/accessory.
NAVIGATION
Show free flowing traffic
Map updates
Select Show Free Flowing Traffic to show
this on the map.
MapCare is a free-of-charge map update
service for Volvo cars equipped with Sensus
Navigation*.
Used Real Time Traffic Information21
Select Real Time Traffic Information to use
Real Time Traffic Information via the Internet
(RTTI).
General information about updating
Related information
There are two ways to update maps. Either via
a computer and a USB memory, or directly
from the car22 (if the car is connected to the
Internet).
•
•
•
•
Navigation system settings* (p. 24)
Map settings (p. 25)
Settings for route and road navigation
(p. 25)
Real Time Traffic Information (p. 23)
Maps may be updated 2-12 times a year
(depending on market).
The car's map is divided up into a number of
predefined regions. When updating map data
it is not necessary to update all the regions the driver can choose to only update one or
more specific regions.
One or several regions can be updated when
the car is connected to the Internet. If a large
number of regions - or the whole map - is to
be updated, the total quantity of map data can
be so large that it is much easier to update via
a computer using a USB memory.
21
22
NOTE
If an itinerary stretches over several
regions, they should all have the same version number. Otherwise there is the possibility that a calculated route may include an
unexpected section of road.
Updating of the map structure
Sometimes the map structure must be
changed - this occurs if a region has to be
added or when a large region needs to be divided into smaller regions. When this occurs
any attempt to update individual regions using
a normal procedure will fail and a message will
indicate the reason.
Instead, the whole map must be reinstalled via
a USB memory stick. For further information,
search support information at
www.volvocars.com or contact a Volvo dealer.
Updating of the navigation system
software
Besides the map data, the navigation system's
own software, which is subject to constant
development, requires updating now and then.
A situation can then arise where the latest
updates of map data cannot be supported by
the existing software of the navigation system.
In which case, a message is shown to inform
Applies to certain markets.
Only applies to certain countries.
}}
* Option/accessory.
27
NAVIGATION
||
28
that the navigation system software must also
be updated. This can be done at a Volvo
dealer. It is also possible to get help with the
map update itself at a Volvo dealer. However,
note that even if the map update itself is freeof-charge, the workshop time for performing
the update may involve charges.
Question
Answer
How large is
an update?
This depends on the market.
Detailed information is provided for each market's map
under the support information at www.volvocars.com.
Frequently asked questions
None of this
updating
works what should
I do?
Search further support information at
www.volvocars.com or contact a Volvo dealer.
Question
Answer
Is it possible
to change
the platform
for map
data, e.g.
from Europe
to North
America?
Yes, with some exceptions.
Contact a Volvo dealer for
up-to-date information.
How long
does it take
to download
a map
update?
It depends on the map file
size and the connection
bandwidth. Information
about the update's size (MB)
is shown on the screen.
Updating maps via computer and
USB
New maps can be downloaded from an Internet-connected computer to a USB memory
and then transferred from the USB memory
to the car's navigation system*.
Preparations
Related information
•
Updating maps via computer and USB
(p. 28)
•
Updating maps from an online car
(p. 31)
•
Frequently asked questions about the navigation system* (p. 32)
•
•
Navigation license agreements* (p. 33)
Updating via computer and USB memory
Copyright for the navigation system*
(p. 36)
* Option/accessory.
NAVIGATION
7. Click on "New download" to download
the map to a USB memory stick or the
computer's hard disk.
USB memory
The following requirements apply if a USB
memory is to manage an update:
3. Tap on the arrow to expand the selected
region.
> Detailed map information is shown.
Parameter
Requirements
USB
standard:
At least 2.0
4. Note the map information under the map
image.
File system:
FAT32, exFAT or NFTS
Downloading of map data from the
Internet to a USB memory
Up to 128 GB
Capacity:
This depends on the market.
Detailed information is provided for each market's map
under the support information
at www.volvocars.com.
Note current map version
Have the USB memory and noted map information readily available.
1.
Go to Volvo Cars support site
(support.volvocars.com) on a computer
with Internet connection and then, under
Downloads, select map downloads.
2. Select the type of maps to be updated.
3. Click on the region to be updated.
> A map image with information on the
latest map data for the region is shown.
4. Verify that the map version is newer than
the one in the car.
1.
Tap on Download Centre in the app view.
2. Press Maps
> Available map regions are shown.
5. Depending on which system you have,
select the download link for either
Windows or Mac.
6. Select "Run" to install the download program.
8. You can verify that the download/copying
to the USB memory stick has worked correctly before you install the map in the car
by repeating steps 1-2 and then pressing
on "Check download" in the download
program.
Download times can vary depending on the
size of the map and the bandwidth of the connection. Verification of correct download to
the USB memory stick before map installation
in the car can be made by selecting to check
the download in the download program.
Mobile connections via mobile devices or situations where the subscription used may have
a monthly data limit are not suitable for use
when downloading.
Transferring map data from a USB to
the car
The time taken to transfer from USB memory
to the car varies depending on map data size.
The update can be performed while driving.
The navigation system can be used to update
a map region, but to update a whole map market, e.g. the EU, the navigation system cannot
be used during the update. If installation is not
finished when the car is switched off then the
update continues when next driving. It is not
necessary to perform the update while driving,
}}
29
NAVIGATION
||
but the ignition must be switched on. Battery
support is recommended if the car is not
driven during the update.
Updating
1. Activate the navigation system.
2. Connect the USB memory to the car's
USB port. If there are two USB ports then
the other one must not be used at the
same time.
3. The navigation system automatically
detects that an update is available and,
during the update of the whole map database, shows on the screen what percentage of the process is complete.
> For the update of an individual map
region, the update starts immediately.
To start the update of the whole map
database, the user must tap on
Confirm - or on Cancel in order to cancel the installation.
4. Tap on Confirm - The update of the whole
map database starts and information
about how the process is proceeding is
shown on the centre display.
5. The centre display shows when the transfer is complete - at which point, remove
the USB memory.
6. Restart the infotainment system.
30
7. Verify that the correct map data have been
transferred to the car by repeating the
steps described under the previous heading "Note current map version".
NOTE
For the installation to start, the following
criteria must be met:
•
Selected area is included on the system's map. It is only possible to download the Scandinavia area if the system
already has a Europe map. If a whole
new map is downloaded then it overwrites the previous map.
•
The version for the selected area is
later than the one in the car.
•
Selected area is compatible with the
car's software. If the update is not
compatible then new software will
need to be downloaded.
•
Selected area is compatible with the
existing map. If the area is not compatible then the map will need to be
replaced.
Interruptions
If there is an interruption during an update an
explanatory text message is always shown on
the centre display.
What happens
if...
Answer
the Infotainment
system is
switched off during the update?
The process pauses and
resumes automatically
from where it stopped
when the system is
reactivated, e.g. when
the engine is started.
the USB memory
is pulled out
before the
update is complete?
The process pauses and
resumes automatically
from where it stopped
when the USB memory
is reconnected to the
car.
For further information, search support information at www.volvocars.com or contact a
Volvo dealer.
Related information
•
Updating maps from an online car
(p. 31)
•
Map updates (p. 27)
NAVIGATION
Updating maps from an online car
The car must be connected to the Internet.
When the car is connected to the Internet,
the navigation system* maps can be updated23.
3. Automatic updating of map data can only
be selected for the home region. If the
home region is not already selected, press
the down arrow to expand the region.
> Detailed map information is shown.
4. Press Set as home region.
1.
The principle of remote updating.
Tap on Download Centre in the app view.
> The app is started and a figure is shown
by Maps which indicates how many
map updates there are for the specified
home region. The figure remains visible
until a new search for updates has been
performed or until updates have been
installed.
2. Press Maps.
3. Press Install and then Confirm.
> Installation of selected map/map
update is started.
For further information, search support information at www.volvocars.com or contact a
Volvo dealer.
Automatic updating of map data
Automatic updating of the home region can be
selected in the Download centre.
1.
Tap on Download Centre in the app view.
2. Press Maps.
23
5. Then scroll to the top of the list of regions,
where you will find the currently selected
home region.
6. Press the down arrow to expand the home
region.
7. Tick the box for Auto update:.
> When the car is connected to the Internet and a map update is available, this
will now be downloaded automatically
to the car.
When a map download in progress is
cancelled
If a map download has begun but the car is
switched off before the download is complete,
the process is paused and then resumed automatically when the car is started again and is
reconnected to the Internet.
If one or more updates have been deselected
or missed, the update files may be too large to
be downloaded directly to the car. In this case,
you have the option of downloading the files
to a USB device for installation in the car.
}}
Only applies to certain countries.
* Option/accessory.
31
NAVIGATION
||
Related information
•
Updating maps via computer and USB
(p. 28)
•
Map updates (p. 27)
Frequently asked questions about
the navigation system*
The following are some frequently asked
questions concerning the navigation system
Sensus Navigation.
The position of the car on the map is
wrong
The navigation system shows the position of
the car to an accuracy of about 20 metres
(65 ft).
There is a greater risk of error when driving on
roads lying parallel to another road, on winding roads, on roads with several levels and
after driving a long distance without making
any distinctive turns.
High mountains, buildings, tunnels, viaducts,
over/underpasses etc. also have a negative
effect on the reception of satellite signals,
which means that accuracy in calculating the
position of the car may decrease.
The system does not always calculate
the fastest/shortest route
When calculating a route, several factors are
taken into account to determine the theoretically best solution. Factors include route distance, road width, road classification, traffic
intensity and speed limits. However, an experienced driver with local knowledge can quite
possibly select a better route.
32
The system may for example use toll
roads or ferries while the driver has
chosen to avoid them
For technical reasons, the system can only use
larger roads when calculating a route extending over a long distance.
If you selected to avoid toll roads and motorways, then they are avoided to the greatest
possible extent and are only used if there is no
other reasonable alternative available.
The position of the car on the map is
incorrect after transportation
If the car is transported, for example by ferry
or train, or in such a way as to impede the
reception of satellite signals, it can take up to
5 minutes before the position of the car is correctly calculated.
The car symbol on the screen behaves
illogically after the tyres have been
changed
In addition to the satellite receiver, the car's
speed sensor and a gyroscope assist in calculating the current position, speed and direction
of travel of the car. After fitting the spare
wheel or changing between summer and winter tyres the system needs to "learn" the size
of the new wheels.
In order that the system shall function optimally it is therefore recommended that the car
* Option/accessory.
NAVIGATION
is driven for a while on roads with good satellite reception (good visibility).
version in the support information on
www.volvocars.com.
The map image does not correspond
with the real situation
Related information
Factors such as the constant expansion and
rebuilding of the road network, new traffic regulations constantly being introduced etc.
mean that the map database is not always, in
every situation, complete.
Because of this the map data is being constantly developed and updated - check now
and again to see if there are any updates.
The car symbol on screen jumps
forwards or spins
The system may need a few seconds to sense
the position and movement of the car before
driving off.
Switch off both the system and the engine.
Start again, but remain stationary for a while
before starting to drive.
The map information is not up to date
See the answer under the next heading.
Is the latest map information
installed?
Map data are updated and improved continuously. In connection with map updates via
computer and USB, the current map version in
the car can be shown. Check the map version
in the car and compare with the available map
•
Map updates (p. 27)
Navigation license agreements*
A license24 is an agreement granting a right
to conduct some activity or to make use of
another person's right under the terms and
conditions of the agreement.
END USER LICENSE AGREEMENT
PLEASE READ THIS END USER LICENSE
AGREEMENT CAREFULLY BEFORE USING
THE HERE DATABASE.
NOTICE TO THE USER
THIS IS A LICENSE AGREEMENT - AND
NOT AN AGREEMENT FOR SALE –
BETWEEN YOU AND HERE EUROPE B.V.
(“HERE”) FOR YOUR COPY OF THE HERE
NAVIGABLE MAP DATABASE, INCLUDING
ASSOCIATED COMPUTER SOFTWARE,
MEDIA AND EXPLANATORY PRINTED
DOCUMENTATION PUBLISHED BY HERE
(JOINTLY ”THE DATABASE”). BY USING THE
DATABASE, YOU ACCEPT AND AGREE TO
ALL TERMS AND CONDITIONS OF THIS
END USER LICENSE AGREEMENT
(”AGREEMENT”). IF YOU DO NOT AGREE
TO THE TERMS OF THIS AGREEMENT,
PROMPTLY RETURN THE DATABASE,
ALONG WITH ALL OTHER ACCOMPANYING
ITEMS, TO YOUR SUPPLIER FOR A
REFUND.
}}
* Option/accessory.
33
NAVIGATION
||
OWNERSHIP
The Database and the copyrights and
intellectual property or neighboring rights
therein are owned by HERE and its licensors.
Ownership of the media on which the
Database is contained is retained by HERE
and/or your supplier until you have paid in full
any amounts due to HERE and/or your
supplier pursuant to this Agreement or similar
agreement(s) under which the Database is
provided to you.
based on) the European Software Directive,
you shall grant HERE reasonable opportunity
to provide said information on reasonable
terms, including costs, to be determined by
HERE.
LICENSE GRANT
HERE grants you a non-exclusive license to
use the Database for your personal use or, if
applicable, for use in your business’ internal
operations. This license does not include the
right to grant sub-licenses.
TRANSFER OF LICENSE
You may not transfer the Database to third
parties, except when installed in the system
for which it was created or when you do not
retain any copy of the Database, and provided
that the transferee agrees to all terms and
conditions of this Agreement and confirms
this in writing to HERE. Multi-disc sets may
only be transferred or sold as a complete set
as provided by HERE and not as subset
thereof.
LIMITATIONS ON USE
The Database is restricted for use in the
specific system for which it was created.
Except to the extent explicitly permitted by
mandatory laws (e.g. national laws based on
the European Software Directive (91/250) and
the Database Directive (96/9)), you may not
extract or reutilize substantial parts of the
contents of the Database nor reproduce, copy,
modify, adapt, translate, disassemble,
decompile, reverse engineer any portion of the
Database. If you wish to obtain interoperability
information as meant in (the national laws
24
34
EULA = End User License Agreement
The Database includes information provided
under license to HERE from third parties and
is subject to the supplier terms and copyright
notices set forth at the following URL:
Here.com/supplierterms
LIMITED WARRANTY
HERE warrants that, subject to the warnings
set out below, for a period of 12 months after
acquisition of your copy of the Database, it will
perform substantially in accordance with
HERE’s Criteria for Accuracy and
Completeness existing on the date you
acquired the Database; these criteria are
available from HERE at your request. If the
Database does not perform in accordance
with this limited warranty, HERE will use
reasonable efforts to repair or replace your
non-conforming copy of the Database. If these
efforts do not lead to performance of the
Database in accordance with the warranties
set out herein, you will have the option to
either receive a reasonable refund of the price
you paid for the Database or to rescind this
Agreement. This shall be HERE’s entire
liability and your sole remedy against HERE.
Except as expressly provided in this section,
HERE does not warrant nor make any
representations regarding the use of results of
the use of the Database in terms of its
correctness, accuracy, reliability, or otherwise.
HERE does not warrant that the Database is
or will be error free. No oral or written
information or advice provided by HERE, your
supplier or any other person shall create a
warranty or in any way increase the scope of
the limited warranty described above. The
limited warranty set forth in this Agreement
does not affect or prejudice any statutory legal
rights that you may have under the legal
warranty against hidden defects.
If you did not acquire the Database from
HERE directly, you may have statutory rights
against the person from whom you have
acquired the Database in addition to the rights
NAVIGATION
granted by HERE hereunder according to the
law of your jurisdiction. The above warranty of
HERE shall not affect such statutory rights
and you may assert such rights in addition to
the warranty rights granted herein.
LIMITATION OF LIABILITY
The price of the Database does not include
any consideration for assumption of risk of
consequential, indirect or unlimited direct
damages which may arise in connection with
your use of the Database. Accordingly, in no
event shall HERE be liable for any
consequential or indirect damages, including
without limitation, loss of revenue, data, or
use, incurred by you or any third party arising
out of your use of the Database, whether in an
action in contract or tort or based on a
warranty, even if HERE has been advised of
the possibility of such damages. In any event
HERE’s liability for direct damages is limited
to the price of your copy of the Database.
THE LIMITED WARRANTY AND LIMITATION
OF LIABILITY, SET FORTH IN THIS
AGREEMENT, DO NOT AFFECT OR
PREJUDICE YOUR STATUTORY RIGHTS
WHERE YOU HAVE ACQUIRED THE
DATABASE OTHERWISE THAN IN THE
COURSE OF A BUSINESS.
WARNINGS
The Database may contain inaccurate or
incomplete information due to the passage of
time, changing circumstances, sources used
and the nature of collecting comprehensive
geographic data, any of which may lead to
incorrect results. The Database does not
include or reflect information on - inter alia travel time and may not include neighborhood
safety; law enforcement; emergency
assistance; construction work; road or lane
closures; road slope or grade; bridge height,
weight or other limits; road conditions; special
events depending on the navigation system
brand you possess.
Related information
•
•
Map updates (p. 27)
Copyright for the navigation system*
(p. 36)
GOVERNING LAW
This Agreement shall be governed by the laws
of the jurisdiction, in which you reside at the
date of acquisition of the Database. Should
you at that moment reside outside the
European Union or Switzerland, the law of the
jurisdiction within the European Union or
Switzerland where you acquired the Database
shall apply. In all other cases, or if the
jurisdiction where you acquired the Database
cannot be defined, the laws of the
Netherlands shall apply. The courts competent
at your place of residence at the time you
acquired the Database shall have jurisdiction
over any dispute arising out of, or relating to
this Agreement, without prejudice to HERE’
right to bring claims at your then current place
of residence.
* Option/accessory.
35
NAVIGATION
Copyright for the navigation
system*
For information about copyright (© Copyright)
– see the "License agreement for navigation
system" section.
Related information
•
•
36
Map updates (p. 27)
Navigation license agreements* (p. 33)
* Option/accessory.
ALPHABETICAL INDEX
A
Alternative route
Eco, Fast, Scenic
ALPHABETICAL INDEX
L
License agreement
S
33
20
Set destination
M
C
Copyright
33, 36
D
Detour
22
Guidance points in Itinerary
Guiding options
map navigation
in centre display
In driver display
in head-up display
6
8
9
Map options
25
Map view
25
P
G
21
24, 25
Send to Car
POI
15, 20
Points of interest
15, 20
18
13, 14, 15, 16, 18
Settings
Map options
route and guidance
traffic information
System activation
24
25
25
26
4
T
Traffic congestion along route
22
Traffic information
broadcast
26
21
Transport of car
32
U
Q
I
Itinerary
edit and delete
show
18
19
19
Questions and answers
Update map data
27, 28, 31
32
V
R
Real Time Traffic Information (RTTI)
23, 24
Voice control
Commands
map navigation
12
9
37
ALPHABETICAL INDEX
38
TP 30178 (English), AT 1917, MY20, Copyright © 2000-2019 Volvo Car Corporation