Volvo | S90 Twin Engine | ‏Excellence | Volvo S90 Twin Engine 2019 Late ‏Excellence

Volvo S90 Twin Engine 2019 Late ‏Excellence
S90
EXCELLENCE
SUPPLEME N T
VÄLKOMMEN!
Here you can read about the functions for the rear seat in your Volvo S90 Excellence. More detailed owner's information is available in the
car, in the app and on the web.
THE CAR'S CENTRE DISPLAY
The owner's manual is available in the car's centre display, where it can be
accessed via the top view.
MOBILE APP
The owner's manual is available as an app (Volvo Manual) for smartphones and tablets. The app also contains video tutorials for selected
functions.
VOLVO'S SUPPORT SITE
The Volvo Cars support site (support.volvocars.com) contains manuals and
video tutorials, as well as additional information and assistance for your
Volvo and your car ownership.
PRINTED INFORMATION
There is a supplement to the owner's manual in the glovebox that contains information on fuses and specifications, as well as a summary of
important and practical information. A printed owner's manual and associated supplement can be ordered.
CONTENTS
01. TUNNEL CONSOLE IN THE REAR SEAT
This section describes what you will find in the tunnel console in the rear seat, e.g. the control display and what can
be controlled from it, plus the cooler box and information on heating and cooling drinks.
02. SEAT SETTINGS
Information on how to adjust and set the seats, along with other seat functionality, can be found here.
03. OVERVIEW OF INTERIOR
Here you can read about the interior of the car and have an overview of the various storage compartments, for example.
04. SPECIAL TEXTS
Warning, important and note texts, which must be read.
All options and accessories, known at the time of publication, are marked with an asterisk: *.
01
CONTROL DISPLAY IN THE REAR SEAT
The control display is fitted in the tunnel console between the rear
seats and it controls the seat functions as well as the heating and cooling of drinks.
Raising the screen
– Press the top of the screen. The screen rises and starts automatically.
The light is dimmed after a certain time. Touch the screen to reactivate
it.
Lowering the screen
The screen is lowered manually:
– Press the top of the screen. Push until the screen is fully retracted
into the tunnel console. The screen is switched off when it is lowered.
01
NAVIGATING IN THE CONTROL DISPLAY
The control display is a touch-sensitive screen that consists of different
views. Tap on a button in the screen to activate or change the settings
for a function.
Buttons in the home view
Heating of the left and right-hand seat respectively.
Cooling/heating of cup holder.
Ventilation of the left and right-hand seat respectively.
Adjusting the front passenger seat from the rear seat.
Returning to home view from another view
The control display automatically returns to the home view after a certain time. When adjusting the front passenger seat, tap on the cross to
return to the home view.
01
COOLER BOX
There is a cooler box behind the armrest in the rear seat with space for
two bottles and the enclosed crystal glasses.
Press the button located above the cover to open the box.
On the inside of the box there is a control for setting the temperature.
The cooling function is active when the car is running or set in ignition
position II.
HOT AND COLD DRINKS
There are two cup/glass holders in front of the armrest, as well as a
heating/cooling holder for e.g. a bottle or tea/coffee cup.
– Press on the cover to open the holder. Heating and cooling are controlled from the control display. Blue LEDs indicate that cooling is
active, red LEDs indicate that heating is active.
Heating or cooling can be activated when the car is running or set in
ignition position II.
Tap repeatedly on the button in the control display to change
between the two functions of cooling and heating. The button
shows the set position.
01
FOLDING OUT THE TABLES
There are two tables under the armrest in the rear seat that can be
folded out over the rear seats.
1. Fully open the armrest cover.
2. Lift the table up out of the armrest using the leather tab and swing it
out to a completely vertical position.
3. Fold down the table top across the seat and slide it to the side.
Repeat the steps in reverse order to fold the table back in.
01
USB PORTS AND ELECTRICAL SOCKETS
USB ports: There are two USB ports under the armrest in the rear
seat. These ports can be used to charge mobile phones or tablets,
for example The display mounts* on the rear of the front seat head
restraints also have two USB ports. These ports can be used to charge
mobile phones or tablets, for example.
It is not possible to playback media in the car's audio system via the
USB ports.
Electrical sockets: There is one 12 V electrical socket and one 230 V
electrical socket under the armrest in the rear seat.
230 V: The socket can be used for various accessories requiring a 230
V supply, such as chargers or laptop computers (maximum power output 150 W).
– Plug in the accessory's connector. Disconnect the accessory by
unplugging the connector.
12 V: The socket can be used for various accessories requiring a 12 V
supply, such as music players or mobile phones (maximum power output 120 W).
– Remove the cigarette lighter from the socket and plug in the accessory's connector. Unplug the accessory's connector and refit the cigarette lighter when the socket is not in use.
The car's electrical system must be in at least ignition position I for the
USB ports and electrical sockets to supply power.
ADJUSTING THE REAR SEAT
The car's rear seats can be adjusted using the controls on the side of
the seats.
Adjust the backrest inclination by adjusting the control forward/
backward.
Raise/lower the seat cushion front edge by means of adjusting the
front section of the control up/down.
Settings for massage, side support, lumbar support and seat cushion extension are linked to the multi-function control.
Only one movement (forward/back/up/down) can be made at a time.
Seat adjustment can be made while the car is running and a certain
time after the doors have been unlocked without the car running.
Adjustment is also possible for a period of time after the car has been
switched off.
The seats have overload protection which is triggered if a seat is
blocked by an object. If this happens, remove the object and then operate the seat again.
To adjust the sleeping/comfort position, it may be necessary to first
move the seat forward slightly.
02
ADJUSTING THE SETTINGS FOR THE SEAT
02
To adjust the lumbar support, side support in the backrest, seat cushion
length and massage settings, use the multi-function control on the side
of the seat. Settings made with the multi-function control are shown in
the control display. The display only shows settings for one seat at a
time.
1. Raise the control display.
2. Activate seat adjustment by turning or pressing the multi-function
control in any direction. The seat settings view opens in the control
display.
3. Select the desired function in the control display by tapping on the
display or turning the multi-function control up/down.
4. Change the setting by pressing on the control in the desired direction.
Massage
Tap on the screen button or select the function using the
multi-function control to activate the massage function. It is
not possible to use the massage function when the car is
switched off.
The following setting options are available for massage:
On/Off:
Choose between On or Off to activate/deactivate the massage function.
Program 1-5:
There are five preset massage programs. Choose between 1
(Swell), 2 (Tread), 3 (Advanced), 4 (Lumbar) and 5 (Shoulder).
Intensity:
Choose between low, normal and high.
Speed:
Choose between slow, normal and fast.
Side support
Tap on the screen button or select the function using the
multi-function control to activate adjustment of side support in
the backrest.
•
•
Press the front section of the seat button on the multi-function control to increase side support.
Press the rear section of the seat button in order to reduce the side
support.
Lumbar support
Tap on the screen button or select the function using the
multi-function control to activate adjustment of lumbar support.
•
•
•
Press the seat button up/down on the multi-function control to move
the lumbar support up/down.
Press the front section of the seat button to increase lumbar support.
Press the rear section of the seat button in order to reduce the lumbar support.
Seat cushion extension
Tap on the screen button or select the function using the
multi-function control to activate adjustment of seat cushion
length.
•
•
Press the front section of the seat button on the multi-function control to extend the seat cushion.
Press the rear section of the seat button to retract the seat cushion.
02
02
ADJUSTING THE FRONT PASSENGER SEAT FROM THE REAR SEAT
The front passenger seat can be adjusted from the rear seat for longitudinal position and the backrest inclination can be changed. Use the
control display to change the settings of the front passenger seat.
1. Tap on the button in the screen.
2. A new view opens and the seat's longitudinal position
and backrest inclination can be adjusted.
3. Tap on the cross to return to the home view.
Adjusting the backrest inclination
•
Tap on the upper left-hand arrow to fold the backrest forwards.
•
Tap on the upper right-hand arrow to fold the backrest backwards.
Adjusting longitudinally
•
Tap on the lower left-hand arrow to move the seat forwards.
•
Tap on the lower right-hand arrow to move the seat backwards.
HEATED/VENTILATED SEATS
The seats can be heated in order to increase comfort when it is cold.
The seat heater is controlled from the control display.
Tap repeatedly on the button for the left or right-hand seat to
change between the three levels: high, medium and low. The
button shows the set level.
The seats can also be ventilated, for example, to remove moisture from
clothes. The seat ventilation is controlled from the control display.
Tap repeatedly on the button for the left or right-hand seat to
change between the three positions: high, medium and low.
The button shows the set position.
MOUNTING POINTS FOR CHILD SEATS
The car is equipped with mounting points for child seats,
and , in
the rear seat row. The upper mounting points are primarily intended for
use with front-facing child seats.
– Recline the backrest to access the mounting point.
> Always follow the manufacturer's mounting instructions for correct
assembly.
02
STORAGE SPACES
There are holders on the rear of the front seat head restraints for
tablets.1
There are ashtrays in the door sides.
There is a storage space under the armrest between the seats.
There are storage compartments in the door sides.
There are storage pockets on the rear of the front seat backrests.
03
There are storage pockets on the sides of the tunnel console.
1
Available as an option in certain markets only.
HOLDER FOR TABLET*
Depending on equipment level selected, there is a tablet holder on the
rear of each front seat head restraint. Contact a Volvo dealer for information on the tablets supported.
Attaching the tablet in the holder
1. Slide the tablet in against the spring unit on the left-hand side of the
holder.
2. Fold the tablet in towards the holder and allow it to spring back in
under the frame.
3. Push the holder down into the bracket until it clicks.
Removing the holder from its bracket
The tablet mount must always be removed when adjusting the seat or
backrest beyond the normal seat position.
1. Press the holder down into the bracket
the button on the head restraint .
2. Pull the holder from the bracket.
and simultaneously press
03
SPECIAL TEXTS
The owner's manual and other manuals contain
safety instructions and all warning, important and
note texts, which must be read. Some functions
only apply to certain markets.
WARNING
HOT AND COLD DRINKS
Store bottles, Thermos flasks, glasses and mugs in
the holders or in the cooler box while driving.
HEATED/VENTILATED SEATS
The control for the heated seat must not be used
by people who find it difficult to perceive an
increase in temperature due to numbness or who
otherwise have difficulty in operating the controls.
This is to prevent burn injuries.
04
MOUNTING POINTS FOR CHILD SEATS
The child seat's upper straps must be routed
through the hole in the head restraint leg before
they are tensioned at the mounting point. If this is
not possible, follow the recommendations from the
seat manufacturer.
STORAGE SPACES
Keep loose objects such as mobile phones, cameras, remote controls for accessories, etc. in the
glove compartment or other compartments. Otherwise they may injure people in the car in the event
of sudden braking or a collision.
IMPORTANT
NAVIGATING IN THE CONTROL DISPLAY
Do not use sharp objects on the screen as they
may scratch it.
FOLDING OUT THE TABLES
A maximum load of 10 kg may be applied to the
table. If the table is overloaded, the table support
arm will loosen in an attempt to protect the table
leg. To reset the table, follow the instructions below:
1. Angle the table top down slightly below horizontal
and hold it in that position.
2. Secure the metal pin in the end of the support
arm in the slots in the rail under the table top. At
the same time, fold aside the black plastic pin
slightly farthest out on the support arm.
3. When the metal pin is in its slot, angle the table
top up so that the attachment device for the support arm engages in the track. Then angle the
table top down again.
The table top's attachment device can now slide in
the rail under the table and the support arm is
thereby secure again.
USB PORTS AND ELECTRICAL SOCKETS
Fuses
Always replace a blown fuse with one that has the
same colour and amperage designation. Never fit a
fuse with a higher value than that indicated in the
table in the owner's manual. If an electrical component is not working then it may be due to the fuse
having blown, caused by a temporary overload. For
information on fuses, see the normal owner's manual for the car.
Power output
The 12 V socket has a maximum power output of
120 W and the 230 V socket has 150 W.
HEATED/VENTILATED SEATS
Seat ventilation cannot be started if the passenger
compartment temperature is too low. This is in
order to avoid cooling down the person sitting in
the seat.
HOLDER FOR TABLET
The tablet should have protective plastic on the
screen when it is fitted in the holder. This is to avoid
glass splinters in the event of a collision.
NOTE
COOLER BOX
The cooler box needs to have free circulation of air
for optimal function. For this reason, you should
leave at least 5 cm of space at the air intake for the
cooler box in the cargo area.
The temperature setting may need to be adjusted
depending on the ambient temperature. The maxi-
mum position is recommended to quickly lower the
temperature.
Due to negative temperature in the bottom of the
refrigerator for faster cooling, condensation may
occur which sometimes needs to be wiped away.
For optimum drying/cleaning, you need to remove
the transparent bottle holder.
HEATED/VENTILATED SEATS
The seat ventilation should be used carefully by
people sensitive to draughts. A low level is recommended for long-term use.
TP 28595 (English), AT 1846, MY19, Copyright © 2000-2018 Volvo Car Corporation
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising