EverFocus | ESK1000 | Owner Manual | Everfocus ESK1000 Owner Manual

Everfocus ESK1000 Owner Manual
IP Sidekick-ESK1000
High-Capacity PoE Power Supply, Wi-Fi Router, Compact Size
User’s Manual
Copyright © EverFocus Electronics Corp,
Release Date: February, 2017
EverFocus Taiwan 12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, New Taipei City, Taiwan
TEL: +886 2 2698 2334 FAX: +886 2 2698 3943 www.everfocus.com.tw marketing@everfocus.com.tw
Disclaimer
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
Copyright
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in
any form or by any means without written permission of the EverFocus Electronics
Corporation.
Privacy Policy
Use of your Personal Information

We collect and use the personal information from this App only within the range of purposes that
described in this App. We will not make any other uses or disclosures of the personal information to the
third parties unless otherwise giving prior notice or provided by relevant laws and regulations of
Taiwan.
When you first run the App, it will ask for authorization to access certain data or functions, such as
microphone or SD card storage. This way you can control permissions for individual Apps.

If you suspect the App of being malicious or asking for unnecessary permissions, you should choose
Deny to protect your device.

If you choose Deny in the trusted App, you may not able to use the App or access its full functionality. In
this case, please go to Settings to change the App permissions.
1.
2.
3.
4.
Go to Settings.
Tap Apps.
Tap a desired App and then tap Permissions.
Choose the permissions you want to grant the App.
1. Introduction
EverFocus brings a useful product, IP Sidekick-ESK1000, to market which helps
you to eliminate all the troubles you may go through when installing IP cameras.
The IP Sidekick- ESK1000 is a multi-functional device which can provide power
to PoE or DC-powered IP cameras and can be used as a Wi-Fi router. While using
ESK1000 in conjunction with our mobile app EF Sidekick, you can power up all
the EverFocus or ONVIF-supported IP cameras and access their live views in just
seconds without pre-configuring the network settings. In all, just with this IP
Sidekick and a smart mobile device at hand, you can complete the IP camera
installation as easily and quickly as never before.
WiFi
Network
Smart Device
PoE-Equipped
IP Camera
USB
DC
Power Adaptor
DC-Powered
IP Camera
Smart Device
-1-
2. Features
•
•
•
•
•
•
•
•
High Capacity Battery
- Four lithium batteries (18650 type)
PoE and DC Power Supplies
A Wi-Fi Router with a Built-in DHCP Server
Supports Mobile Application: EF Sidekick
Supports all EverFocus and ONVIF-Supported IP Cameras
Compact Size and Easy Portable Design
Multi-Function
- Smartphone Charger
- Wireless AP Provider
LED Indicators for Power, PoE and Charging Status
Packing List
Please check that there is no missing item in the package before installing.


 Power Adaptor + Cord x 1
 Power Cable x 1
IP Sidekick x 1
Strap x 1
Note:
1. Equipment configurations and supplied accessories vary by country. Please
consult your local EverFocus office or agents for more information. Please
also keep the shipping carton for possible future use.
2. Contact the shipper if any items appear to have been damaged in the
shipping process.
-2-
3. Physical Descriptions
EverFocus IP Sidekick consists of two parts, the Wi-Fi Router and the Battery,
which are already connected inside the bag through the power cable and LAN
cable, so please do not take them out of the bag if it’s not necessary.
Wi-Fi Router
1
3
2
4
5
Battery
6
No. Item Name
1
LAN
2
WAN
3
4
PoE Indicator
Power Indicator
5
Charging Indicator
6
PoE Output
7
8
9
DC Output
USB Output
Power Switch
10
DC Input
7
8
9
10
Descriptions
For connecting to the Battery.
For connecting to the Internet. It is not required to
connect to the Internet for IP camera installation.
Indicates it is providing power for a PoE IP camera.
Indicates the power capacity.
Indicates the Battery is charging. Charging: Red / Full:
Green.
Connects to an IP camera, and it can also provide
power to PoE-equipped IP camera.
Provides 12 VDC power to a DC-powered IP camera.
Supplies 5 VDC power for charging a smart phone.
Switch it to power on or off.
Connect to a 19 VDC power using the supplied power
adaptor.
-3-
4. Getting Started
1.
2.
3.
4.
Turn on the Power Switch of the IP Sidekick.
Connect the IP camera to the PoE output of the IP Sidekick, and the IP
Sidekick will automatically assign an IP address (192.168.1.X) to the IP
camera.
If your IP camera is DC-powered, connect the power cable to the DC
output of the IP sidekick.
5.
Install EverFocus IP Sidekick app,
EF Sidekick, from App Store /
Android Market (search EF Sidekick) to your smartphone.
Turn on Wi-Fi function of your smart phone, and connect to the IP Sidekick
(Wi-Fi network name: EverFocus_Sidekick).
iOS:
Android:
6.
Enter the Sidekick Wi-Fi Password. The default password is 11111111.
-4-
7.
The Device List Page appears and the EverFocus/ONVIF-supported devices
connected to the Sidekick Wi-Fi network will be automatically listed. You
can also manually add RTSP devices to the list.
Tap to display
user manual
Tap to enter
device Web page
To manually add RTSP devices:
1. Tap
to enter the Manual Connect page.
2. Enter RTSP URL and user ID/Password.
3. Tap Connect.
8.
Tap any device from the list to enter its Live View page. Enter the User
account and Password, and then tap Connect to display device live view.
Icon
Name
Description
Tap to take a snapshot. The snapshot
Snapshot
files will be saved at your Photos
folder of your smartphone.
Tap to bring up the PTZ control panel,
PTZ
if the PTZ camera is connected,
please see 5. PTZ Control.
Tap to enable or disable audio output
Audio
(speaker) function.
Tap to enable or disable audio input
Microphone
(microphone) function.
Tap to enter the device setting page
Device Setting
(see Step 9 below).
-5-
9.
For EverFocus devices with default ID/Password, the EF Sidekick App will
automatically connect to the device for live view displaying. (EverFocus
device’s default ID: user1 / Password: 11111111)
You can optionally change the device settings. On the Live View page, tap
to enter the Device Setting page.
iOS:
Android:
TIP: You can set up a new static IP address for your camera after
installation is completed. Please see the instructions on page 7.
Important Note:
Once you change the IP address of the camera, the EF Sidekick app
cannot connect to that IP camera again unless you change the IP address
of your smartphone, please refer to the Note on page 8.
-6-
iOS: Disable the DHCP function (slide to the left), and tap IP Address to
change the IP address. Tap Save to Device to save the settings.
Android: Tap DHCP to disable the DHCP function, and tap IP Address to
change the IP address. Tap Save to save the settings.
-7-
NOTE:
If you can’t see the connected IP camera showing on the device list, it’s
probably because the camera has been set up with a static IP address
before. You need to set a static IP on your smartphone to make your
smartphone and the IP camera in the same wireless network.
Example: if the static IP address of the IP camera is 192.168.0.10, then
please change the IP address of your smartphone to 192.168.0.12. Keep
the same Subnet Mask, Router and DNS IP as those in DHCP settings.
a. iOS device:
(1) Go to Setting > Wi-Fi
(2) Tap Static to set up a static
IP address.
(3) Tap <Wi-Fi to save the
settings.
b. Android device:
(1) Go to Setting > Wi-Fi.
(2) Tap and hold on the Wi-Fi name to
modify the network.
(3) Check Show Advanced Options, and
change the IP Setting to Static to set
up a static IP address.
(4) Tap Save to save the settings.
-8-
5. PTZ Control
You can remotely control the PTZ cameras or configure the PTZ Preset setting by
this application. Before start using the Auto Pan, Pattern and Tour functions,
please note that you need to pre-configure these settings of the connected PTZ
camera through local OSD or remote web page. Please refer to the User’s
Manual of your PTZ camera. You can also control PTZ camera using gestures.
To control PTZ camera, tap the
PTZ icon, and the screen shows as below.
And you can swipe the PTZ setting button field to bring up the next setting page.
iOS:
Android:
EPN4220-1.0.16_F1
Swipe to show the rest
function buttons.
-9-
Focus: Tap to adjusting the camera focus. (iOS: Slide the bar to left to focus near,
and slide to right to focus far).
Iris+ / Iris-: Tap to widen or narrow down the IRIS opening.
Preset: The function is used to force camera to turn to the preconfigured preset
position. Tap the Preset button to bring up the Preset setting page. Enter a
Preset number and then tap Go to go to the Preset camera view, tap Set to set
the camera preset position, or tap Delete to delete the camera preset position.
Auto Pan: Tap to force the camera to pan 360°endlessly.
Pattern: Tap to move the camera in a pattern mode (The pattern mode is the
Pattern “1” configured in EverFocus PTZ cameras).
Tour: Tap to move the camera in a tour mode (The tour mode is the Tour “1”
configured in EverFocus PTZ cameras).
Menu: Tap the Menu button on the PTZ panel to bring up the OSD menu on the
screen. You can use the Up and Down arrow icons on the screen to select
among each menu item, tap the Right arrow icon to enter the selected menu
item, and tap Left arrow icon to return to the previous page. (Analog PTZ
camera only).
Gesture Controls: You can swipe to change the directions, pinch to zoom out,
and spread to zoom in on “single” division screen / full screen.
-10-
6. Specification
Model
Cell type
Input
ESK1000
18650 (2950mA) x 4pcs
19VDC / 3.16A
30W(Max)
PoE
Output
DC12V
12V / 1.5A
USB
Overcharge
Overdischarge
Protection Shortcircuit
Overheating
5V / 1A
Yes
Yes
Yes
Yes
Excessive Load
Power/
Capacity
Indicator
Yes
Charging Indicator
Power Indicator
Yes (Charging: Red / Full: Green)
Yes (Green<100%,80%,60%,40%,20%>)
PoE Power Supply
Indicator
Dimensions
Yes (Green)
76.2 x 25.4 x 156 mm / 3” x 1” x 6.14”
Weight
Operating Temperature
Certificates
550g / 1.21lb
0°C ~40°C / 32°F ~104°F
CE, FCC
-11-
P/N: 4605P1ESK1B012C
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising