EverFocus | EBA1840 | Owner Manual | Everfocus EBA1840 Owner Manual

Everfocus EBA1840 Owner Manual
EBA1840 eZ.HD Series
8MP, IP66 IR Dome Camera
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: May, 2019
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
1.
Introduction
EverFocus eZ.HD series cameras – EBA1840 deliver 8MP image quality. The
model is equipped with 8MP CMOS sensor and provides 4mm fixed lens with
ICR. Featured with True Wide Dynamic Range (T-WDR), the camera can
provide clear images even under backlight circumstances where intensity of
illumination can vary excessively. The EBA1840 supports both NTSC and PAL
scanning systems (auto detection) and is IP66 certified.
1.1 Packing List



Camera x 1
Mounting Sticker x 1
L-Type Wrench x 1


Screw & Screw Anchor x 4
User Manual x 1
1.2 Features







Equipped with 8MP CMOS sensor
4mm fixed lens with ICR to capture the desired field of view
Extended IR range of up to 20m / 66ft. with 18 LEDs (depends on scene
IR reflectivity)
T-WDR to improve the visibility under high contrast scene
The flexible angle viewing with its 3-Axis rotation design allows wall or
ceiling mounting
IP66-rated with metal housing
Supports UTC function: Control camera OSD settings from DVR end
1.3 Dimensions
76mm / 3"
94.5mm / 3.72"
1
1.4 Optional Accessory
BA-E310
Color / Material: White / Metal
Size (Φ x H): 101 x 52mm / 3.98” x 2”
Weight: 540g / 1.2lb
BA-E173
Color / Material: White / Metal
Size (W x D x H): 173 x 111 x 114mm / 6.81”x 4.37”x 4.49”
Weight: 700g / 1.5lb
1.5 Cable Description
12VDC Power Cable
Video Output Cable (BNC, 75Ohm)
2.
Installation
1. Stick the supplied Mounting Sticker to the surface to mark the 4 screw
positions. Drill four holes on the surface and insert the supplied 4 Screw
Anchors into the screw holes. If you want to run the cable through the
surface, drill a hole within the 4 screw area.
2. Unscrew the Outer Housing by twisting it counterclockwise and then
remove it from the Camera Base.
Camera Body
Outer Housing
Camera Base
2
3. Screw the Camera Base to the surface with the supplied four Screws.
a. If you want to wire the cables from the Side Cut on the Camera Base:
Attach the Camera Body to the Camera Base and run the cables through
the Camera Base, and then place the cable under the Side Cut. Finally,
screw the Camera Base to the surface with the supplied 4 Screws.
Wall
Camera Body
Camera Base
Side Cut
b. If you want to wire the cables through the surface:
Attach and screw the Camera Base to the surface with the supplied 4
Screws, and then attach the Camera Body to the Camera Base.
Camera Base
Wall
Camera Body
3
4. Screw back the Outer Housing and adjust the camera angle
simultaneously.
180°
180°
360°
5. Connect the Power Cable to a 12VDC power source. Connect the Video
Output Cable to a monitor or DVR.
UP
6. You can use the Joystick on the cable to configure camera OSD settings or
switch to different video formats. Remove the Protection Cap from the
Joystick before using it.
Switching Video Format:
• Push the joystick up for 5 sec. to switch to
AHD.
• Push the joystick right for 5 sec. to switch
to TVI.
• Push the joystick down for 5 sec. to switch
to CVI.
• Push the joystick left for 5 sec. to switch to
CVBS.
DN
Configuring OSD Settings:
• Push the Joystick up / down to select
among menu items.
• Push the Joystick left / right to adjust the
level of the selected item.
• Press the Joystick to enter the submenu or
exit the OSD Setup Menu.
4
3.
Configuration in the OSD Menu
No Main
1
Edge Det
Sub Menu
On
Off
Brightness
2
Exposure
Shutter
Sens-Up
AGC
HLC
BLC
3
Backlight
WDR
Off
4
Day/Night Mode
Sub Menu / Function
Level
0-10
YEL, CYN, GRN, MAG, RED, BLU, BLK,
Color
WHT
0-20
Auto
Mode
Manual
Speed
Normal / Deblur
1/30, 1/60, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/8000, 1/15000,
1/30000
Flicker
Not supported
0-10
Level
0-20
YEL, CYN, GRN, MAG, RED, BLU, BLK,
Color
WHT
H-POS
0-38
V-POS
0-35
H-SIZE
0-38
V-SIZE
0-35
WDR Mode Line
Window Zone 0-3
Window Use On, Off
H-POS
0-3856
Box
V-POS
0-2176
H-SIZE
0-3856
V-SIZE
0-2176
Window Zone 0-3
Window Use On, Off
ROI Mode
POS0-X
0-935
POS0-Y
0-360
POS1-X
0-935
Polygon
POS1-Y
0-360
POS2-X
0-935
POS2-Y
0-360
POS3-X
0-935
POS3-Y
0-360
Off
Weight
High, Middle, Low
Auto
Color
B/W
5
IR LED
Anti-Sat.
D>N Thres
N>D Thres
Delay
Adaptive, Off
0-20
0-20
0-20
High, Middle, Low
IR LED
Adaptive, Off
Extern
5
6
7
Color
DNR
AWB
Auto
Autoext
Preset
Manual
Anti-Sat.
D>N Thres
N>D Thres
Delay
IR LED
Anti-Sat.
Extern SW
D>N Thres
N>D Thres
Delay
0-20
0-20
0-20
High, Middle, Low
Adaptive, Off
0-20
High, Low
0-20
0-20
High, Middle, Low
C-Temp
R-Gain
B-Gain
3000K, 5000K, 8000K
0-20
0-20
Color Gain
0-20
High, Middle, Low, Off
Sharpness
0-10
Gamma
0.45, 0.55, 0.65, 0.75
Mirror
On, Off
Flip
On, Off
D-Zoom
Not supported
ACE
High, Middle, Low, Off
Mode
On
Defog
Level
Off
On
Weight
Shading
Off
Image
On
Box
Off
Privacy
Polygon
On
6
Auto, Manual
High, Middle, Low
0%-100%
Zone Num
Zone Disp
H-POS
V-POS
H-Size
V-Size
Y Level
CB Level
CR Level
Trans
0-15
On, Off
0-120
0-68
0-120
0-68
0-120
0-68
0-120
0-68
Zone Num
Zone Disp
POS0-X
POS0-Y
POS1-X
POS1-Y
POS2-X
POS2-Y
POS3-X
POS3-Y
Y Level
0-7
On, Off
0-240
0-136
0-240
0-136
0-240
0-136
0-240
0-136
0-20
CB Level
CR Level
Trans
Det Window
8
Motion
On
Off
Output
9
System
Image Range
Color Space
Audio Mic
Color Bar
Language
Cam Title
10 Exit
Reset
Sensitivity
Motion OSD
Text Alarm
Signal Out
Off
Window Use
Window Zone
Det H-POS
Det V-POS
Det H-Size
Det V-Size
0-10
On, Off
On, Off
On, Off
0-20
0-20
0-3
0-3
On, Off
0-96
0-56
0-96
0-56
Frame Rate
4K/15fps, 4MP/30fps, 1080p/30fps
Freq
60Hz (auto detection)
Analog Mode AHD, TVI, CVI, CVBS
Confirm
Yes
Return
Exit
Full
Comp
User
Offset
0-32
HD-CbCr, SD-CbCr, YUV
Not supported
On, Off
ENG, CHN, CHN(S), JPN, KOR, POR, ESP
Left-Down
Right-Up
Off
On
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising