EverFocus | EZA2580 | Owner Manual | Everfocus EZA2580 Owner Manual

Everfocus EZA2580 Owner Manual
EZA2580 eZ.HD Series
5MP Dual Power IP66 IR Bullet Camera
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: May, 2019
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
1.
Introduction
Equipped with a Sony STARVIS CMOS sensor, the EZA2580 deliver 5MP image
quality. The model provides 2.8-12mm lens with ICR. Featured with True Wide
Dynamic Range (T-WDR), the camera can provide clear images even under
backlight circumstances where intensity of illumination can vary excessively.
The EZA2580 supports dual power (12VDC / 24VAC, depends on model) and
supports both NTSC and PAL scanning systems.
1.1 Packing List



Camera x 1
Mounting Sticker x 1
L-Type Wrench x 1


Screw & Screw Anchor x 3
User Manual x 1
1.2 Features








5MP Sony STARVIS CMOS sensor, delivering amazing high sensitivity
Varifocal 2.8-12mm with ICR to capture the desired field of view
Extended IR range of up to 40m / 131ft. with 4 LEDs (depends on scene
IR reflectivity)
T-WDR to improve the visibility under high contrast scene
3-Axis rotation design allows wall or ceiling mounting
IP66-rated with metal housing
Supports dual power (12VDC / 24VAC, depends on model)
Supports UTC function: Control camera OSD settings directly from DVR
end
1.3 Dimensions
91.5mm /3.6"
84mm / 3.31"
280mm / 11"
128mm / 5"
1
1.4 Optional Accessory
BAE3201
Color: White
Size (Φ x H): 138 x 54mm / 5.43” x 2.16”
Weight: 700g / 1.87
Material: Metal
1.5 Cable Description
12VDC or 24VAC Power Cable
Video Output Cable (BNC, 75Ohm)
2.
Installation
1. Stick the supplied Mounting Sticker to the surface to mark the 3 screw
positions. Drill 3 holes on the surface and insert the supplied 3 Screw
Anchors into the screw holes. If you want to run the cable through the
surface, drill a hole within the 3 screw area.
2. To mount the camera to the surface, screw the Camera Base to the surface
using the supplied 3 Screws.
Camera Base
Screws
Screw Anchors
Mounting
Surface
3. Connect the Power Cable to a 12VDC / 24VAC power source. Connect the
Video Output Cable to a monitor or DVR.
4. You can use the Joystick on the cable to configure camera OSD settings or
switch to different video formats. Remove the Protection Cap from the
Joystick before using it.
2
UP
Switching Video Format:
• Push the joystick up for 5 sec. to switch to
AHD.
• Push the joystick right for 5 sec. to switch to
TVI.
• Push the joystick down for 5 sec. to switch to
CVI.
• Push the joystick left for 5 sec. to switch to
CVBS.
Configuring OSD Settings:
• Push the Joystick up / down to select among
menu items.
• Push the Joystick left / right to adjust the level
of the selected item.
• Press the Joystick to enter the submenu or
exit the OSD Setup Menu.
DN
5. For the first time installation, check whether the camera is properly
focused. If not, you can manually adjust camera Zoom or Focus using the
supplied L-Type Wrench. You can find the Zoom and Focus nuts on the
bottom of the camera.
ZOOM
FOCUS
6. You can optionally adjust camera angles. To do so, loosen the Tilt Screw or
Rotate Screw on the bracket using the supplied L-Type Wrench to adjust
camera angles. After adjusting camera angles, tightly screw back the
Tilt/Rotate screws.
Tilt Screw
Rotate Screw
3
3.
Configuration in the OSD Menu
No Main
1
Edge Det
Sub Menu
On
Off
Brightness
2
Exposure
Shutter
Sens-Up
AGC
HLC
BLC
3
Backlight
WDR
Off
4
Day/Night Mode
Sub Menu / Function
Level
0-10
YEL, CYN, GRN, MAG, RED, BLU, BLK,
Color
WHT
0-20
Auto
Mode
Manual
Speed
Normal / Deblur
1/30, 1/60, 1/120, 1/250,
1/500, 1/1000, 1/2000,
1/4000, 1/8000, 1/15000,
1/30000
Flicker
X2, x4, x8, x16, x32, Off
0-10
Level
0-20
YEL, CYN, GRN, MAG, RED, BLU, BLK,
Color
WHT
H-POS
0-26
V-POS
0-32
H-SIZE
0-26
V-SIZE
0-32
WDR Mode Frame, Line
Window Zone 0-3
Window Use On, Off
H-POS
0-2608
Box
V-POS
0-1960
H-SIZE
0-2608
V-SIZE
0-1960
Window Zone 0-3
Window Use On, Off
ROI Mode
POS0-X
0-721
POS0-Y
0-535
POS1-X
0-721
Polygon
POS1-Y
0-535
POS2-X
0-721
POS2-Y
0-535
POS3-X
0-721
POS3-Y
0-535
Off
Weight
High, Middle, Low
Auto
Color
B/W
4
IR LED
Anti-Sat.
D>N Thres
N>D Thres
Delay
Adaptive, Off
0-20
0-20
0-20
High, Middle, Low
IR LED
Adaptive, Off
Extern
5
6
7
Color
DNR
AWB
Auto
Autoext
Preset
Manual
Anti-Sat.
D>N Thres
N>D Thres
Delay
IR LED
Anti-Sat.
Extern SW
D>N Thres
N>D Thres
Delay
0-20
0-20
0-20
High, Middle, Low
Adaptive, Off
0-20
High, Low
0-20
0-20
High, Middle, Low
C-Temp
R-Gain
B-Gain
3000K, 5000K, 8000K
0-20
0-20
Color Gain
0-20
High, Middle, Low, Off
Sharpness
0-10
Gamma
0.45, 0.55, 0.65, 0.75
Mirror
On, Off
Flip
On, Off
D-Zoom
1.0X-16X
ACE
High, Middle, Low, Off
Mode
On
Defog
Level
Off
On
Weight
Shading
Off
Image
On
Box
Off
Privacy
Polygon
On
5
Auto, Manual
High, Middle, Low
0%-100%
Zone Num
Zone Disp
H-POS
V-POS
H-Size
V-Size
Y Level
CB Level
CR Level
Trans
0-15
On, Off
0-80
0-61
0-80
0-61
0-20
0-20
0-20
0-3
Zone Num
Zone Disp
POS0-X
POS0-Y
POS1-X
POS1-Y
POS2-X
POS2-Y
POS3-X
POS3-Y
Y Level
0-7
On, Off
0-162
0-122
0-162
0-122
0-162
0-122
0-162
0-122
0-20
CB Level
CR Level
Trans
Det Window
8
Motion
On
Off
Sensitivity
Motion OSD
Text Alarm
Signal Out
Frame Rate
Output
9
System
Image Range
Color Space
Audio Mic
Color Bar
Language
Cam Title
10 Exit
Reset
Off
Window Use
Window Zone
Det H-POS
Det V-POS
Det H-Size
Det V-Size
0-10
On, Off
On, Off
On, Off
0-20
0-20
0-3
0-3
On, Off
0-80
0-60
0-80
0-60
4K/15fps, 4MP/30fps, 1080p/30fps,
5MP/12.5fps, 5MP/20fps, 4MP/15fps
60Hz, 50Hz
AHD, TVI, CVI, CVBS
Yes
Freq
Analog Mode
Confirm
Return
Exit
Full
Comp
User
Offset
0-32
HD-CbCr, SD-CbCr, YUV
Not supported
On, Off
ENG, CHN, CHN(S), JPN, KOR, POR, ESP
Left-Down
Right-Up
Off
On
6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising