EverFocus | EBA1280 | Owner Manual | Everfocus EBA1280 Owner Manual

Everfocus EBA1280 Owner Manual
EBA1280 eZ.HD Series
1080p FHD IP66 IR Dome Camera
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: May, 2019
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
1.
Introduction
EverFocus eZ.HD series cameras – EBA1280 deliver 1080p full HD image quality.
The model provides 2.8-12mm lens with ICR. Featured with Digital Wide
Dynamic Range (D-WDR), the camera can provide clear images even under
backlight circumstances where intensity of illumination can vary excessively.
The EBA1280 supports both NTSC and PAL scanning systems and is IP66
certified.
1.1 Packing List



Camera x 1
Mounting Sticker x 1
L-Type Wrench x 1


Screw & Screw Anchor x 4
User Manual x 1
1.2 Features







Equipped with 1080p Full HD CMOS sensor to deliver stunning image
quality
Varifocal 2.8-12mm with ICR to capture the desired field of view
Extended IR range of up to 30m / 98ft. with 24 LEDs (depends on scene
IR reflectivity)
D-WDR to improve the visibility under high contrast scene
The flexible angle viewing with its 3-Axis rotation design allows wall or
ceiling mounting
IP66-rated with metal housing
Supports UTC function: Control camera OSD settings directly from DVR
end
1
1.3 Dimensions
60.2mm / 2.37"
98mm / 3.86"
120mm / 4.72"
1.4 Optional Accessory
BA-E320
Color / Material: White / Metal
Size (Φ x H): 138 x 54mm / 5.43”x2.13”
Weight: 700g / 1.5lb
BA-EB45
Color / Material: White / Metal
Size (W x D x H): 245x160x163mm / 9.65”x6.3”x6.42”
Weight: 2.1kg / 4.63lb
1.5 Cable Description
1 Power Cable
2 Video Output Cable
No. Name
Descriptions
1
Power Cable
Connects to a 12VDC power source.
2
Video Output
1080p output, using 75 Ohm BNC-type coaxial cable.
2
2.
Installation
1. Stick the supplied Mounting Sticker to the surface to mark the 4 screw
positions. Drill four holes on the surface and insert the supplied 4 Screw
Anchors into the screw holes. If you want to run the cable through the
surface, drill a hole within the 4 screw area.
2. Unscrew the Outer Housing by twisting it counterclockwise and then
remove it from the Camera Base.
Camera Body
Outer Housing
Camera Base
3. Screw the Camera Base to the surface with the supplied four Screws.
a. If you want to wire the cables from the Side Cut on the Camera Base:
Attach the Camera Body to the Camera Base and run the cables through
the Camera Base first, and then place the cable under the Side Cut.
Finally, screw the Camera Base to the surface with the supplied 4
Screws.
Wall
Camera Body
Camera Base
Side Cut
3
b. If you want to wire the cables through the surface:
Attach and screw the Camera Base to the surface with the supplied 4
Screws, and then attach the Camera Body to the Camera Base.
Camera Base
Wall
Camera Body
4. Screw back the Outer Housing and adjust the camera angle
simultaneously.
180°
180°
360°
5. Connect the Power Cable to a 12VDC power source. Connect the Video
Output Cable to a monitor or DVR.
6. For the first time installation, check whether the camera is properly
focused. If not, you can optionally adjust camera zoom and focus by
adjusting the Zoom Screw or Focus Screw using a slotted screwdriver.
Focus
Zoom
4
7. You can use the Joystick on the cable to configure camera OSD settings or
switch to different video formats. Remove the Protection Cap from the
Joystick before using it.
Switching Video Format:
•
UP
•
•
•
Push the joystick up for 5 sec. to switch to
AHD.
Push the joystick right for 5 sec. to switch
to TVI.
Push the joystick down for 5 sec. to switch
to CVI.
Push the joystick left for 5 sec. to switch to
CVBS.
Configuring OSD Settings:
•
•
•
Push the Joystick up / down to select
among menu items.
Push the Joystick left / right to adjust the
level of the selected item.
Press the Joystick to enter the submenu or
exit the OSD Setup Menu.
5
DN
3.
Configuration in the OSD Menu
No Main
1
AE
Sub Menu
Brightness
Exposure
Mode
Return
2
AWB
Mode
Sub Menu / Function
0-100
Global
Center
FLC
BLC
0-7
ATW
Gray World
MWB
R Gain
B Gain
Auto
Gain Day/Night Low/Middle/High
Gain Night/Day Low/Middle/High
Return
3
Day/Night
4
Image
Enhance
5
Video
Setting
6
Language
7
Function
Mode
Color
B/W
0-63
0-63
Return
Contrast
Auto/Manual 0-20
Sharpness
Auto/Manual 0-20
Saturation
Auto/Manual 0-20
3DNR
Auto/Manual 0-20
2DNR
Auto/Manual 0-20
DWDR
Close/Open
Return
AHD
1080P25/1080P30/720P25/720P30
TVI
1080P25/1080P30/720P25/720P30
CVI
1080P25/1080P30/720P25/720P30
CVBS
PAL/NTSC
Apply & Reboot
Return
ENG/CHN/CHN(T)/RUS/SPA/FRA/POL/ITA/POR/JAP/KOR/GRE
Mode
On/Off
Display
On/Off
X Position Start 0-100
Y Position Start 0-100
Area 0-3
Width
0-100
Privacy
Height
0-100
Return
Color
Red/Green/Blue
Transparency On/Off
Return
Mode
On/Off
Display
On/Off
X Position Start
0-100
Motion
Y Position Start
0-100
Area 0-3
Width
0-100
Height
0-100
Return
6
8
9
10
11
Version
Reset
Save & Exit
Exit
Return
Color
Red/Green/Blue
Transparency On/Off
Return
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising