Eizo | FDF2304W-IP | Owner Manual | Eizo FDF2304W-IP Owner Manual

Eizo FDF2304W-IP Owner Manual
Color LCD Monitor
Software Version 4.3
Important
Please read this “Setup Manual”, the “Instruction Manual” and the
“Installation Manual ” carefully to familiarize yourself with safe and
effective usage.
Please retain this manual for future reference.
••For the latest product information including the “Setup Manual”,
refer to our web site :
http://www.eizoglobal.com
English
Setup Manual
SAFETY SYMBOLS
This manual and this product use the safety symbols below. They denote critical information. Please read
them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury and can be life
threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury and/or
property or product damage.
Indicates an attention to be required. For example, the symbol
type such as “the risk of electric shock”.
Indicates a prohibited action. For example, the symbol
action such as “Do not disassemble”.
illustrates the hazard
illustrates a particular prohibited
Indicates a mandatory action that must be followed. For example, the symbol
the notification of general prohibition such as “Grounding the unit”.
illustrates
About this manual
Setup Manual
(this manual)
Describes precautions and setup processes from network camera
connection to camera image display.
Instruction Manual*1
Describes operation of network cameras and live image screen menus,
etc.
Installation Manual*1
Describes network camera registration and function setup, monitor
system setup, etc.
*1 PDF file on the CD-ROM (Installation of Adobe Acrobat Reader is required.)
This product has been adjusted specifically for use in the region to which it was originally shipped. If
operated outside this region, the product may not perform as stated in the specifications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information confidential unless
prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every
effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specifications are subject to change without notice.
2
PRECAUTIONS
English
IMPORTANT
To ensure personal safety and proper maintenance, please read carefully this section and the caution
statements on the monitor.
Location of the Caution Statements
WARNING
AVERTISSEMENT
WARNUNG
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes strange
noises, disconnect all power connections immediately and contact your local EIZO
representative for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may result in
fire, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or spillage into
the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/
spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service
engineer before using it again.
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment damage. If
the unit falls, disconnect the power immediately and ask your local EIZO representative for
advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or
electric shock.
3
WARNING
Use the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in a transportation system (ship, aircraft, train, automobile, etc.) where it may be
affected by strong vibration or shock.
• Do not place in a dusty or humid environment.
• Do not place in environments with corrosive gases (such as sulfur dioxide, hydrogen sulfide,
nitrogen dioxide, chlorine, ammonia, and ozone).
• Do not place in environments with dust, components that accelerate corrosion in the
atmosphere (such as sodium chloride and sulfur), conductive metals, and so on.
• Do not place in a location where water is splashed on the screen (bathroom, kitchen, etc.).
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidifier.
• Do not place in a location where the product is subject to direct sunlight.
• Do not place in an inflammable gas environment.
To avoid danger of suffocation, keep the plastic packing bags away from babies and
children.
Use the enclosed power cord and connect to the standard power outlet of your country.
Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or
electric shock.
Power supply: 100-120/200-240 Vac 50/60Hz
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Failure to do so may result in fire or electric shock.
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to another voltage than
specified in this User’s Manual may cause fire, electric shock, or equipment damage.
• Do not overload your power circuit, as this may result in fire or electric shock.
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or
electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the arm stand and
install the unit securely.
Otherwise, the unit may become detached, resulting in injury and/or equipment damage. If
the unit falls, please ask your local EIZO representative for advice. Do not continue using a
damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the
tilt stand, please use the same screws and tighten them securely.
4
WARNING
English
Handle the batteries for the remote control with care.
Not doing so may result in battery explosion, liquid leakage, or burns.
• Do not disassemble, heat, short-circuit, or immerse the provided batteries in water.
• Install/change batteries in a correct way.
• When replacing batteries, use ones of the same type and model.
• When replacing batteries, replace all of them at the same time with new batteries of the
same brand and type.
• Insert batteries with correct direction of the plus (+) and minus (-) sides.
• Do not use the battery with coating damaged.
• Dispose of your battery in a designated disposal area.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly.
If some physical symptoms result, please consult your doctor.
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord
attached is dangerous. It may result in injury.
When carrying the unit, grasp and hold it firmly by the bottom as shown
in the illustration on the right.
Dropping the unit may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet.
• Do not place any objects on the ventilation slots.
• Do not install the unit in a place with poor ventilation or inadequate space.
• Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or
equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the power cord
from the wall socket after turning off the power for safety and power conservation.
5
CONTENTS
PRECAUTIONS....................................................... 3
IMPORTANT............................................................... 3
CONTENTS.............................................................. 6
Package Contents.................................................. 7
Controls and Functions......................................... 8
●●Monitor............................................................. 8
●●Remote Control................................................ 9
Setup..................................................................... 10
Connect the network camera(s).............................11
Prepare the remote control.....................................12
Turning On the Power..............................................13
●●Logging In........................................................15
Configuring the Language......................................17
Perform Easy Setup.................................................18
Reference.............................................................. 24
●●Confirming the Software Version....................24
●●How to Attach the Optional Arm.....................24
●●Connecting HDMI Devices............................. 25
●●Specifications................................................. 28
●●Display capability........................................... 29
●●Outline Dimensions........................................ 29
Appendix............................................................... 30
FCC Declaretion of Conformity............................. 30
6
Package Contents
• Monitor
• Remote control
• Power cord
• AA batteries (2 pcs)
English
Check that all of the following parts are included. If any of these are missing or damaged, contact your
dealer or local EIZO representative listed on the attached sheet.
• Setup Manual (this manual)
• HDMI cable (HH200HS)
• EIZO User’s Manual (CD-ROM)
Note
• Please keep the packaging box and materials for future movement or transport of the monitor.
7
Controls and Functions
●●Monitor
11
1
2
3
5
4
6
Name
7
8
Receives signals from the remote control.
2.
Switches input signals for display.
3.
button
9
Description
1. Remote control detector
button
10
Turns the power on or off.
Indicates the monitor’s operation status.
4. Power Indicator
5. USB downstream port
Blue
Operating
Flashing blue
Shutting off the system
Red
Power off (With “Quick Start” to “On”*1)
OFF
Power off (With “Quick Start” to “Off”*1)
Connects a USB mouse or storage devices such as a USB flash drive.*2
Connects the network cable.
a) Link LED
6. LAN port
a b
b) Status LED
Green
Network connection
established
OFF
Network connection not
established
Flashing
orange
Data transfer is in progress
7. HDMI connector
Connects external devices that support HDMI.
8. Power connector
Connects the power cord.
9. Main power switch
Turns the main power on or off.
| : On
O : Off
10. Security lock slot
Complies with Kensington’s MicroSaver security system.
11. Stand*3
Used to adjust the angle of the monitor screen.
*1 The power-off status can be set with “Quick Start”. For details, refer to the Installation Manual.
*2 Other USB devices (such as USB keyboards or USB hubs) cannot be connected.
*3 An optional arm (or an optional stand) can be attached by removing the stand section. Refer to “How to
Attach the Optional Arm” (page 24) for details on how to mount the arm.
8
●●Remote Control
2
3
4
English
1
5
6
7
9
8
10
11
12
13
Name
Description
1.
Switches input signals for display.
2.
Turns the power on or off.
3.
Used to display/exit the monitor’s Adjustment menu.
4.
/
Adjusts the brightness of the monitor screen.
5. Number Buttons
( 0 to 9 ) /
/
6.
7.
/
/
Used to enter numbers and letters.
Adjusts the network camera display magnification.
/
Used to set and control (pan / tilt) network cameras, and configure system
settings of the monitor.
,
8.
Returns to the previous menu status in menu operation.
9.
Changes the live image screen layout.
Each time the button is pressed, the layout changes in the following order:
1 Screen → 3 Screens → 4 Screens → 9 Screens → 16 Screens → 8
Screens → Custom Screen → 1 Screen.
10.
Displays / hides the menu of the live image screen.
*1
11.
12.
13.
Turns Visibility Optimizer function on or off.
Turns the sequential display of camera images on or off.
/
Changes the camera image page to display on the live image screen.
*1 Some remote controls are labeled “Smart”.
9
Setup
Sets up to displaying network camera images on the monitor.
You can operate and set the monitor by using either the remote control or a USB mouse.
For details, refer to the corresponding pages.
Setup Flow
Connect the network camera(s) (page 11)
Prepare the remote control (page 12)
Turning On the Power (page 13)
Configuring the Language (page 17)
Perform Easy Setup (page 18)
Set the following items using the setup wizard.
•
•
•
•
Date and time on the monitor
Monitor network information
Automatic discovery of network cameras
Display positions of camera images
Setup completed.
Images from the network camera(s) are displayed on the monitor.
Attention
• The language used in menus and messages displayed when the monitor is started differs according to the
sales region.
• When using the Easy Setup function, only the network cameras installed in the same subnet as the monitor
are detected. If a network camera is installed in a different subnet, the camera must be registered manually
(For more information, refer to the Installation Manual (“Chapter2 Configuring from the Monitor Screen”)).
Note
• When using a USB mouse to operate the menu
-- Connect the mouse to the USB downstream port at the back of the monitor.
10
Connect the network camera(s)
Connect the network camera and the monitor according to the following procedure.
1. Connect the network cable (straight cable, Cat 5e or higher) to the monitor and the LAN port of the
network hub.
LAN
Network cable
Network hub*1
(To 1000Base-T port)
*1 Use a hub compatible with 1000Base-T. For some network cameras, the hub must be compatible with
the PoE function. Check the network camera’s manual for information on the appropriate hub to use.
2. Connect the network camera to the network hub.
For connecting the network camera and the network hub, refer to the network camera’s manual.
Connection examples
Network camera
Network camera
Network hub
Network cable
Note
• A maximum of 16 network cameras can be connected.
2. Plug the power cord into a power outlet and the power connector on the
monitor.
Plug the power cord fully into the monitor.
Attention
• Do not bundle cables when wiring.
11
English
1. Connect the network camera to the monitor via the network hub.
Prepare the remote control
Insert batteries into the remote control. The remote control is used for operating and configuring this
monitor.
1. On the back of the remote control, press the knob to unlock, and remove the
cover.
2. Input AA batteries, and slide the cover back.
Attention
• Use the remote control within the range illustrated in the diagram below.
5m
5m
7m
30°
7m
30°
5m
20°
20°
5m
• When installing multiple monitors, leave sufficient space between each monitor so that only the intended
monitor will be operated by the remote control. Otherwise, all monitors that receive the remote control signal
will operate accordingly.
12
Turning On the Power
English
1. Turn on the main power switch on the back of the monitor.
The main power switch is turned on when factory default settings are configured.
2. Press
on the front of the monitor or
on the remote control.
The power indicator lights up blue and the live image screen is displayed. For details on the live
image screen, refer to the Instruction Manual.
Menu
Network camera image display area
Message display area
Attention
• By default, it takes approximately one minute for the live image screen to be displayed after the power is
turned on (A rotating bar indicating startup is displayed). Do not turn off the monitor during startup.
• When the monitor is started up for the first time, a menu for operating the monitor and network cameras is
displayed.
• When no network camera is registered, a “Not Registered” message is displayed at the network camera
image display area.
Note
• The time required to display the live image screen can be reduced (Quick Start) by changing the power-off
status. For details, refer to the Installation Manual.
• Press ‘ on the front of the monitor or
on the remote control to turn off the power.
13
Menu Operations
Each menu is operated using the remote control or a USB mouse.
If the menu is not displayed, press
mouse to display the menu.
on the remote control, or click the screen with the USB
Display mode menu
System setup menu / Camera control menu
Display mode menu
Camera images displayed on the live screen can be operated.
Display mode menu
Remote control
button
Description
SDisplays / hides the menu of the live image display
screen.
Changes the live image screen layout.
Each time the button is pressed, the layout changes in the
following order:
1 Screen → 3 Screens → 4 Screens → 9 Screens →
16 Screens → 8 Screens → Custom Screen →
1 Screen.
*1
Turns Visibility Optimizer function on or off.
Turns the sequence display of the camera image (mode
that switches the display page at regular intervals ) on or
off.
/
*1 Some remote controls are labeled “Smart”.
14
Changes the camera image page to display on the live
image screen.
System setup menu / Camera control menu
The system settings menu is used for logging into and configuring the system. The camera control
menu controls network cameras from the monitor in the camera operation menu.
Description
To select an item
Press the
/
/
/
To confirm a selected item
Press
To change a setting
With setting buttons:
(Excluding zoom in/out and position adjustment).
Press
English
Item
buttons.
.
With list box:
1. Press
.
The list box is highlighted in green.
2. Select the setting with
3. Press
To return to the previous menu level
Press
or
.
.
.
Note
• When canceling a setting change in process, press
To exit the setting screen
1. Select “Exit” from the list of setting items with
2. Press
.
.
.
●●Logging In
1. Check that
(Login) is selected and press
.
The login screen is displayed.
Login
Login screen
Note
• The currently selected item is lit up in green.
2. Enter the “Username” and the “Password”.
1. Select a text field and press
.
The text field is highlighted in green.
2. Enter the username or password shown below and then press
.
Username: “admin”
Password: “admin”
Note
• The above username and password are default settings.
15
Entering characters
1. Press
.
The text field is highlighted in green.
2. Press the number buttons ( 0 to 9 ).
Press a button consecutively to change over to the character next in order. For the order of character entry,
refer to the table shown below.
Button
Input characters
0
0
1
1
2
3
4
-
_
:
.
/
(space)
a
b
d
e
c
A
B
C
2
f
D
E
F
3
g
h
i
G
H
I
4
5
j
k
l
J
K
L
5
6
m
n
o
M
N
O
6
7
p
q
r
s
P
Q
R
8
t
u
v
T
U
V
8
9
w
x
y
z
W
X
Y
To enter a new character, press
To delete a character, press
3. Press
S
7
Z
9
.
.
.
Note
• Entering network addresses
Network address text fields are separated by [.] (a period mark).
-- When a three-digit number is entered, the cursor automatically moves to the next entry position.
-- When entering a two-digit or one-digit number, press to move to the next entry position.
• When using a USB mouse:
-- When you enter a period “.”, the cursor moves to the next entry position.
-- To enter characters, click “Keyboard” on the character entry screen. Then click the keys on the displayed
keyboard to enter characters.
Attention
• The remote control cannot be used to select the character entry screen keyboard.
3. Select “Login” and press
.
The screen returns to the live image screen and
(Setup) becomes available.
Setup
16
Configuring the Language
Set the display language for the live screen menu and the setting screen from the setting menu.
(Setup) and press
.
English
1. Select
The setup screen is displayed.
2. Check that “System” is selected and press
3. Select “Other” and press
.
.
3
2
Displays current settings.
4. Select “Language” and press
Select the list box and press
.
. Select a language using
or
the press
.
Attention
• If “Polski” is selected for HDMI signal input, the display language is set to English.
5. Select “Apply” and press
.
4
5
The setting complete screen is displayed. Select “OK” and press
6. press
.
.
17
Perform Easy Setup
Necessary settings for displaying network camera images on the monitor.
1. Start up the network camera(s).
For network camera setup, refer to the network camera’s manual.
Attention
• Connect cameras other Panasonic or AXIS network cameras using ONVIF. Check if ONVIF is enabled in the
settings of the camera.
2. Check that “Easy Setup” is selected and press
3. Check that “Start” is selected and press
.
.
The Easy Setup wizard starts and the date/time setup screen is displayed.
4.
Set the date and time on the monitor.
1
2
3
1. Select “Date/Time Display Settings” and press
.
2. Set the “Date Format”, “Time Format” and “Time Zone”.
Select the list box of an item and press
Select a setting with
or
and press
.
.
3. After completing the setting, select “Apply” and press
The setting complete screen is displayed. Press
4. Press
18
.
.
to select “OK”.
5. Select “Clock Setting” using
or
, then press
.
English
7
6
9
6. Set the “Year”, “Month”, “Day”, “Hour”,and “Minute”.
Select the list box of an item and press
Select a setting with
or
and press
.
.
7. After completing the setting, select “Apply” and press
The setting complete screen is displayed. Press
8. Press
.
to select “OK”.
.
9. Select “Next” and press
.
The network settings screen is displayed.
5.
Set monitor network information.
1
2
3
4
1. Check that “IP Setting Method” is selected and press
Select a setting with
or
and press
.
.
If you selected “Manual Setting”, proceed to step 2.
If you selected “DHCP”, proceed to step 3.
2. Set the “IP Address”, “Subnet Mask” and “Gateway”.
Select the list box of an item and press
.
Input the respective values. For details on the data entry method, refer to “Entering characters” (page 16).
Attention
• If your network environment does not include a gateway, you do not need to set the “Gateway” address.
Use the default setting as is, or set as “0.0.0.0”.
19
3. After completing the setting, select “Apply” and press
The setting complete screen is displayed. Press
4. Select “Next” and press
.
to select “OK”.
.
The network camera automatic discovery screen is displayed.
6.
Automatically discover network cameras.
1. Select “Camera Discovery”, then press
2. Select the camera type using
or
.
, then press
.
1
3. Check that “Start” is selected and press
.
The camera user authentication screen is displayed.
4
5
4. Enter the “Username” and “Password” of the user who has administrator’s rights, specified in the
network camera.
The following values are entered as the default settings. Change the settings if necessary.
Please contact your administrator for the username and password.
-- Username: “admin”
-- Password: “12345”
20
5. Select “OK” and press
.
Automatic discovery is started and a “Searching” message is displayed.
Information on discovered network cameras are displayed.
English
The network camera discovery results are displayed.
6
Discovery Results
Description
Blank
When there is no information update for the registered network cameras, or one
is not connected
New
When there is an unregistered network camera, or information was updated for a
registered network camera
Duplicate
When there is a network camera with a duplicate IP address
6. After the search is completed, select “Next” and press
.
The network camera display position settings screen is displayed.
Note
• The displayed camera name is the name set on the camera side. If cameras have identical names, they are
automatically numbered (e.g. camera_1).
• When network cameras are not automatically detected, see “Chapter 4 Troubleshooting” in the Installation
Manual.
• When using an AXIS network camera
-- When executing automatic detection with an incorrect user name or password, “------” is displayed for the
model name.
-- When a detected IP address is a duplicate of a registered network camera, but the username and password
are correct, ‘Model Name – MAC Address’ is displayed, and ‘------’ is displayed for the model name.
21
7.
Set the positions for displaying the network camera images.
1
Indicates the display
positions on the monitor
screen.
4
1. Press
.
The “After Change” list box is selected.
2. Set a network camera to a position for displaying images.
Select the list box of a display position you wish to set and press
Select a network camera with
or
and press
3. After completing the setting, press
4. Select “Next” and press
.
.
.
.
Attention
• All cameras discovered at step 6 must be set. A network camera can only be set for one display position.
When there are incorrect settings, “Next” cannot be selected.
8.
Finish Easy Setup.
1
1. Check that “End” is selected and press
The setting complete screen is displayed. Press
Easy Setup is completed.
22
.
to select “OK”.
9.
Close the setup screen.
English
1
2
1. Select “Return” and press
2. Select “Exit” and press
.
.
The screen returns to the live image screen.
Check that images from the network camera(s) are displayed on the monitor.
(Example)
23
Reference
●●Confirming the Software Version
1. Check that “System” is selected and press
.
The current software version is displayed in the system information.
1
●●How to Attach the Optional Arm
An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to
our web site (http://www.eizoglobal.com) for the corresponding optional arm (or optional stand).
Attention
• When attaching an arm or stand, follow the instructions of their user’s manual.
• When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming
to the VESA standard. Use the screws securing the unit and the stand.
-- Clearance between the screw holes: 100 mm × 100 mm
-- Thickness of plate: 2.6 mm
-- Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables.
• When using an arm or stand, attach it to meet the following tilt angles of the monitor.
-- Up 45°, down 45°
• Do not turn the monitor in the vertical direction.
• Connect the cables after attaching an arm or stand.
• The monitor and arm or stand are heavy. Dropping them may result in injury or equipment damage.
• Periodically check the tightening of screws. If screws are loose, the monitor may detach and cause injury or
equipment damage.
24
Procedure
1. Lay the LCD monitor on a soft cloth spread over on a stable surface with the
LCD panel surface facing down.
Prepare a screwdriver. Loosen the screws (four) securing the unit and the stand with the screwdriver.
3. Attach the arm or stand to the monitor.
Secure the monitor to the arm or stand using the screws specified in the user’s manual of the arm or
stand.
●●Connecting HDMI Devices
Connect an HDMI device to this product to switch over the network camera display to the HDMI
device.
Connection examples
HDMI device
(Network video recorder etc.)
HDMI cable
(supplied HH200HS)
25
English
2. Remove the stand.
Compatible Resolutions / Formats
The monitor supports the following resolutions and signal format.
PC Signal
Resolution
Applicable Signals
Vertical Scan
Frequency
640 × 480
VGA, CEA-861
60 Hz
720 × 400
VGA TEXT
70 Hz
720 × 480 (4 : 3)
CEA-861
60 Hz
720 × 480 (16 : 9)
CEA-861
60 Hz
720 × 576 (4 : 3)
CEA-861
50 Hz
720 × 576 (16 : 9)
CEA-861
50 Hz
800 × 600
VESA
60 Hz
1024 × 768
VESA
60 Hz
1280 × 720
CEA-861
60 Hz
1280 × 960
VESA
60 Hz
1280 × 1024
VESA
60 Hz
1680 × 1050
VESA CVT, VESA CVT RB
60 Hz
1920 × 1080*1
CEA-861
60 Hz
*1 Recommended resolution
Video Signal
-- 480p / 720p / 1080p: 60 Hz
-- 576p / 720p / 1080p: 50Hz
26
Dot Clock
148.5 MHz
(Max.)
To switch among input signals
Press
on the remote control to change over the input signal.
When the signal is switched, the active input port name appears at the top right corner of the screen.
English
Note
•
on the monitor also can change the input.
Adjusting screen brightness
Adjust the brightness of the monitor screen by changing the brightness of the backlight (light source
at the back of the LCD panel).
Adjustable range
0 to 100
Procedure
or
1. Press
on the remote control.
The brightness adjustment menu is displayed.
2. Set the brightness with
or
.
The menu disappears automatically after approximately five seconds.
Specifying color space
The color space of the input signal can be specified. Change the settings when colors are not
displayed accurately.
Attention
• “Auto” cannot be selected during PC signal input.
Adjustable range
Auto, YUV 4:2:2, YUV 4:4:4, RGB Full Range, RGB Limited Range
Procedure
on the remote control.
1. Press
The Adjustment menu is displayed.
2. Select “Color Space” with
3. Use
or
or
and press
.
for adjustment.
4. Press
.
5. Press
to exit the Adjustment menu.
27
●●Specifications
LCD Panel
Type
IPS
Backlight
LED
Size
58 cm (23.0 inch) (58.4 cm diagonal)
Native resolution
1920 dots × 1080 lines
Display size (H x V)
509.1 mm × 286.4 mm
Pixel pitch
0.2652 mm
Display colors
8-bit colors : 16.77 million colors
Viewing angles (H / V, typical) 178˚ / 178˚
LAN
Video signal
(network)
Contrast ratio (typical)
1000 : 1
Response time (typical)
Approx. 8 ms (gray-to-gray)
Standard
IEEE802.3ab (1000BASE-T), IEEE802.3u (100BASE-TX)
Communication speed
1000 Mbps, 100 Mbps
Protocols
TCP/IP
IP version
4
Terminal
RJ-45
Video compression format
H.264, MJPEG
Maximum resolution
H.264
: 1920 × 1080*1
MJPEG
: 640 × 480
Maximum frame rate
30 fps
Maximum bit rate
8192 kbps
Number of displayed network Max. 16 units
cameras
Video signal
(HDMI)
USB
Power supply
Input terminals
HDMI
Digital signal transmission
system
TMDS (Single Link)
Digital scanning frequency
(H / V)
31 kHz to 68 kHz / 49 Hz to 61 Hz
(VGA TEXT : 69 Hz to 71 Hz)
Applicable video signal
formats
480 p / 720 p / 1080 p : 60 Hz
576 p / 720 p / 1080 p : 50 Hz
Port
Downstream port × 2
Standard
USB Specification Revision 2.0
Communication speed
480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
Supply current
Max. 500mA / 1 port
Input
100-120 VAC ± 10%, 50 / 60 Hz 0.65 A
200-240 VAC ± 10%, 50 / 60 Hz 0.4 A
Maximum power consumption 61 W or less
Standby mode
33 W or less (with “Quick Start” set to “On”)
3.0 W or less (with “Quick Start” set to “Off”)
Physical
specifications
Operating
environmental
specifications
Dimensions
563.5 mm × 411.5 mm × 157 mm (W × H × D) (tilt : 0˚)
563.5 mm × 425 mm × 200 mm (W × H × D) (tilt : 30˚)
Dimensions (without stand)
563.5 mm × 325 mm × 63 mm (W × H × D)
Net weight
Approx. 7.2 kg
Net weight (without stand)
Approx. 4.8 kg
Tilt
Up 30˚, down 0˚
Temperature
0 °C to 35 °C (32 °F to 95 °F)
Humidity
20 % to 80 % R.H. (no condensation)
Air pressure
540 hPa to 1060 hPa
-20 °C to 60 °C (-4 °F to 140 °F)
Transportation/ Temperature
Storage
Humidity
10 % to 90 % R.H. (no condensation)
environmental
Air pressure
200 hPa to 1060 hPa
specifications
*1 Images are not displayed when the maximum resolution is exceeded. Reduce the resolution and / or the bit
rate set for the network camera.
28
●●Display capability
The table below shows the display capability of this product
H.264 (when the “Bit rate” is set at “4096kbps”)
1920 × 1080 / 30 fps
At 3-screen display
640 × 1024 / 30 fps
At 4-screen display
1920 × 1080 / 20 fps
At 8-screen display
1280 × 720 / 20 fps
At 9-screen display
1280 × 720 / 20 fps
At 16-screen display
640 × 480 / 30 fps
English
At 1-screen display
MJPEG
640 x 480 / 30 fps
Attention
• The above values are provided for reference purposes. Images are not displayed properly when display
capability is exceeded because of network camera settings, network installation environment or other
reasons. When images are not displayed properly, reduce the network camera resolution and bit rate. Set
network camera settings in accordance with the camera’s manual.
●●Outline Dimensions
Unit: mm
100
113
(VESA)
100
(VESA)
15
86.5
249
289
325
411.5
563.5
512
17.5
25
63
453
220
12
157
200
131.5
425
30°
14
Tilt : 30˚
29
Appendix
FCC Declaretion of Conformity
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO Inc.
5710 Warland Drive, Cypress, CA 90630
Phone: (562) 431-5011
declare that the product
Trade name: EIZO
Model: DuraVision FDF2304W-IP
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures.
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
* Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep
interference within the limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (enclosed)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
30
153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan
Helmut-Grashoff-Strasse 18, 41179 Mönchengladbach, Germany
中国苏州市苏州工业园区展业路 8 号中新科技工业坊 5B
http://www.eizoglobal.com
Copyright © 2014-2018 EIZO Corporation. All rights reserved.
00N0L856H1
SUM-FDF2304WIP-4
8th Edition-February, 2018 Printed in Japan.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising