Pro-Ject | Debut Carbon Esprit SB (DC) | Setup guide | Pro-Ject Debut Carbon Esprit SB (DC) Setup Guide

Pro-Ject Debut Carbon Esprit SB (DC) Setup Guide
Getting started:
• Make sure to have enough space to unpack your turntable.
Debut Carbon Setup Guide
• Always unpack and setup in a clean enviroment.
• Important for warranty: Do not throw packaging away.
Please read before unpacking
1
Unpack all items from accessory bag.
a)
b)
2
Remove dust cover carton from the box.
6
Unpack the power supply.
3
Lift the wrapped turntable
out of the box.
a) Adapter for 7“ singles
b) Anti Skating Weight
d)
c)
c) Connect it E RCA cable
d) Round belt for 78 RPM (not incl. with Debut Carbon DC)
e) Standard flat belt for 33/45 RPM
e)
4
• Setup is demonstrated with Debut Carbon Esprit SB.
Carefully remove the protection covering.
5
Unpack the counterweight.
7
Unpack the platter.
Tonearm is fragile!
9
A
A10
Speed Change
Put the drive belt on the pulley
and sub-platter.
10
B
Put the drive belt on the pulley
and sub-platter.
11
Put the platter on the turntable.
15
Put a record on the platter.
19
Turn the whole counterweight counterclockwise until the scale reads 18.
Debut Carbon
-OR-
B
Debut Carbon Esprit SB
Small pulley
Large pulley
12
Remove tonearm twist tie.
16
Place the tonearm between platter
and armrest.
Electronic
Speed Change
Manual Speed Change:
Debut Carbon RecordMaster HiRes
33 RPM
45 RPM
13
Put the counterweight in place.
17
Balance the tonearm so it stays level by
turning the counterweight forwards and
backwards on the rod.
Large pulley
14
18
for round belt (78 RPM)
Remove the needle protection cover.
Turn the front dial of the counterweight
(not the whole weight) so the ‘0’ is in line
with marker at the back of the tonearm.
0°
Lower the tonearm with the lift.
20
Put the loop of the Anti Skating Weight in
the second groove on the tonearm post.
21
Unpack Dust Cover and put it on the
turntable.
22
Connect to your hifi-system and enjoy
your music!
>
Find possible sets on the
backside of this paper.
Debut Carbon
Connect to any amp with integrated phono amplifier
or use an external phono preamp.
Possible Setup:
Pro-Ject Speaker Box 5 S2 (bookshelf speaker)
and Pro-Ject MaiA S2 (stereo integrated amplifier).
Features
Connect it E (RCA Cable)
Gold-plated
RCA sockets
Carbon
Tonearm
Included
felt mat
Speaker cable
Speaker cable
Debut Carbon Esprit SB
Connect to any amp with integrated phono amplifier
or use an external phono preamp.
Features
Possible Setup:
Pro-Ject Speaker Box 5 S2 (bookshelf speaker)
and Pro-Ject MaiA S2 (stereo integrated amplifier).
Connect it E (RCA Cable)
Gold-plated
RCA sockets
Carbon
Tonearm
Acrylic
Platter
Speaker cable
Speaker cable
Electronic
Speed Control
Debut Carbon RecordMaster HiRes
Output Board: Record Level potentiometer, Input Switch, Line Out, USB Out,
Optical Out. You can record your vinyl in high resolution formats.
Features
Possible Setup:
Pro-Ject Speaker Box 5 S2 (bookshelf speaker)
and Pro-Ject MaiA S2 (stereo integrated amplifier).
PC / Mac
Output
Board
Carbon
Tonearm
Acrylic
Platter
Connect it E (RCA Cable)
Speaker cable
Electronic
Speed Control
Speaker cable
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising