Pro-Ject | Juke Box E | Product Information | Pro-Ject Juke Box E Product Information

Pro-Ject Juke Box E Product Information
“All-in-one Plug & Play“
MSRP 499 € (incl. VAT)
• Instant playback with super-easy setup
• Bluetooth and 1 line input
• High contrast display on top
• Line record output
• Gold plated sockets
• Pre-adjusted tracking force & anti-skating force
• Ortofon OM5e cartridge, pre-mounted
• 8,6” aluminium tonearm with sapphire bearings
• Belt drive with silicone belt
• Low vibration synchronous motor & DC power supply
• Special feet for effective decoupling
• Acrylic lid included
• IR remote control included
High gloss color options:
Power output: 2 x 50 watts (4 ohms)
Outputs: Speakers, Line out (fixed), Phono out
Inputs: Bluetooth (2.1, EDR), 1x line (analogue)
Speed: 33, 45 (manual speed change)
Principle: belt drive
Speed variance: 33: 0,8% 45: 0,7%
Wow & flutter: 33: 0,29% 45: 0,27%
Platter: 300mm plywood with felt mat
Main bearing: stainless steel in bronze bushing
Tonearm: 8,6” aluminium
Effective arm length: 218,5 mm
Overhang: 22,0mm
Effective tonearm mass: 8,0gr
Counterweight for mass: 3 - 5,5g (included)
Tracking force range: 0 - 25mN
(OM5e 18mN pre-adjusted)
Included accessory: power supply, dust cover,
remote control
Power consumption: 110W max
Dimensions: 415 x 118 x 334mm (WxHxD)
Weight: 5 kg net
Technical data and price changes reserved.
Page 1/3
“All-in-one Plug & Play” turntable
system with Bluetooth, line input &
easiest possible set-up!
Juke Box E is record player, phono stage, Bluetooth
receiver, line pre-amplifier and power amplifier in
one, requiring only a pair of speakers to make a
complete system. If you thought that a starter turntable system is complicated to set up, Juke Box E
proves the contrary. This good sounding belt-drive
deck offers the fastest possible installation process
because it comes pre-adjusted out of the box and
offers superb sound quality.
Tracking force and anti-skating of the turntable section are carefully pre-set. An acrylic dust cover is included. The “All-in-one turntable system” is available in high-gloss black, red or white colour.
Juke Box E - just add speakers!
With the its full range of analogue and digital inputs,
Juke Box E becomes one of the most versatile offerings on the market. A turntable, a preamplifier, a
power amplifier and a Bluetooth receiver as a good
look- ing and audiophile one-box-solution! The Line
output even lets you relay the signal to a further amplifier, such as the Head Box S2, to become an even
completer setup.
The built-in high contrast display always tells you
what volume-setting you are listening at and what
input currently is in use. So you always know what’s
happening. The 32-step digital potentiometer gives
you perfect feedback and allows you to fine-tune
to your desired volume. Pressing the volume knob
switches between the available inputs. For further
convenience an infrared remote control is included!
Why would the forefront of analogue
which in our opinion still are not adequate to enjoy
the full potential of analogue players.
Turntables and the analogue experience have gained in popularity the last few years, many people
are searching for a true and simple plug-and-play
solution. A lot of products have been introduced to
the market which are supposed to end this search,
though there have only been two solutions so far,
The most popular probably is a plastic turntable
with built-in speakers. Those are mostly made in
far-east with cheap construction and toy-like build quality. These products are very far from the
analogue sound as it is supposed to be, they even
are close to destroying your valuable records. The
built-in speakers also cause lots of vibrations which
HiFi offer an all-in-one turntable?
Technical data and price changes reserved.
Page 2/3
are picked up from the cartridge, the outcome is a
very distorted and boomy sound. On top of that,
you won’t get close to a real concert-like stereo
feeling, as the speakers are too close to each other
to form a room-like sound stage.
With Juke Box E we want to show all vinyl enthusiasts and growing audiophiles, how easy and great
a music experience from a modern record player
can be!
A better way would be to add active speakers, but
the problem here is that the cable from the turntable to the speakers can be maximum 1.2 meters.
This again causes many distortions and a coloured
sound. With the short distance between the speakers of approximately 2 meters you will also not
create a stereo effect. If you would like to add a second source, like a CD player or even your smartphone, you will very likely come into difficulties with
the cabelling.
We believe that the only true solution to this request
is our Juke Box E. It offers built-in pre and power-amplifier, which allows you to place the speakers far
away from each other to minimize the possibility
of acoustic feedback and to create a real analogue
stereo experience.
Acrylic dust cover and felt mat included.
Technical data and price changes reserved.
Page 3/3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF