Pro-Ject | 6 PerspeX SB | Product Information | Pro-Ject 6 PerspeX SB Product Information

Pro-Ject 6 PerspeX SB Product Information
PRODUCT INFORMATION
6 PERSPEX SB
Highend turntable with 9“ Evo tonear
MSRP 1.599 € (incl. VAT)
MSRP 1.999 € (incl. VAT) with Quintet Blue
� Acrylic plinth
� Sub-chassis made from Corian with magnetic
suspension
� Acoustically inert sandwich construction of platter
with combination of MDF and vinyl layer as mat
� Inverted main bearing with ceramic ball/plate
� Belt drive with AC motor with DC driven AC generator
� Electronic speed control with 33/45 rpm switching
� Pre-mounted 9“ tonearm 9 cc Evolution
� Tonearm bearings with ABEC 7 ballraces
� Connect it Phono E cable with RCA plugs
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Speed: 33, 45 (electronic speed change)
Drive principle: belt drive
Platter: MDF/vinyl Sandwich (300mm diameter)
Mains bearing: inverted stainless steel with ceramic ball/
plate
Wow & flutter: +/-0,1%
Speed drift: +/-0,06%
Signal to noise: 73dB
Tonearm: 9” cc EVO (Carbon)
Effective arm length: 230 mm
Effective arm mass: 8,0 g
Overhang: 18mm
Tracking force: 10 - 35mN
Supplied counterweights: 5 - 7,5gr / 7 - 10gr / 9 - 11gr /
10 - 14gr
External power supply: 15 volts DC / 800mA
Power connection: 110/120 or 230/240 Volt - 50 or 60 Hz
Power consumption: 6 watts max / < 0,3 watts standby
Dimensions: 460 x 183 x 365mm (WxHxD)
Weight: 11,0 kg net
Technical data and price changes reserved.
Page 1/2
PRODUCT INFORMATION
6 Perspex SB: The ultimate
subchassis turntable for the
21st century
The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and
carries the motor and the sub-chassis. The sub-chassis,
made of Corian, rests on three magnetic fields.
A magnetic subchassis suspension system avoids
parasitic noise normally caused by conventional spring
mechanism. A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor
unit drives the platter‘s outside edge via a belt. It does
incorporate an advanced DC-driven motor control, that
ensures perfect speed stability and electronic speed
change.
The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre
platter and a 4mm thick flat-ground layer of vinyl and
a screw-down metal record clamp. It runs on an inverted bearing with stainless-steel axle carrying a ceramic
ball/plate bearing. The headshell and armtube of highend tonearm 9cc Evolution are fashioned from a single
freestanding engine
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
piece of carbon-fibre.
A conical armtube avoids
standing wave reflections. Inverted tonearm bearing
comprises four hardened stainless tips in ABEC 7 spec
ballraces. Supplied counterweights are suitable for
cartridges weighing between 5 - 7,5g / 7 - 10g / 9 - 11g
or 10 - 14g.
A top-grade connection cable Pro-Ject Connect it E
iwith RCA connectors is supplied (123cm). A dust cover
is included.
carbon fibre tonearm: Non-resonant tube
with low friction bearings
conical decoupling feet
Technical data and price changes reserved.
Page 2/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising