Novatel | SMART-MR15 CDMA (Verizon) | User manual | Novatel SMART-MR15 CDMA (Verizon) User Manual

Novatel SMART-MR15 CDMA (Verizon) User Manual
SMART-MR15TM CDMA (Verizon) Activation
To activate your SMART-MR15 on the Verizon network, please follow these steps:
1.
Obtain a Verizon Wireless Account. You will need to provide: Verizon Wireless with the following
information:
a. Product Name: SMART-MR15 CDMA (Verizon) [Part Number: 01018606]
b. Modem Serial Number (MEID): Modem serial number from SMART-MR15 product label.
2.
Activate the modem with Verizon:
a. Apply power and establish a serial connection with
your product, as outlined in the SMART-MR15
Quick Start Guide.
b. Send the following commands to the receiver:
NovAtel Command
LOG CELLSTATUS
Label Location
Guidance
It is recommended that you check this log to verify the
modem state is ENABLED, that signal strength is
acceptable, and that your modem is registered on the
Verizon Wireless Network prior to cellular activation.
NovAtel Command
CELLACTIVATE verizon
3.
Guidance
This command will provision the module for use on the
Verizon network
Your product is ready for use.
WARNING:
Cellular data consumption and service charges are dependent on the configuration of your
SMART-MR15 receiver and data logging rates.
Dealer/Integrator Label Goes Here
For further information, contact NovAtel Customer
Support at:
Email:
support@novatel.com
Web:
www.novatel.com
Phone:
1-800-NOVATEL (1-800-668-2835)
U.S. & Canada
+1-403-295-4900 (international)
Fax:
+1-403-295-4901
© Copyright 2011 NovAtel Inc. All rights reserved. Printed in Canada on recycled paper. Unpublished rights reserved
under international copyright laws. Recyclable.
GM-14915104
Rev 1
Jan 21, 2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising