Novatel | SMART-MR15 GPRS/HSDPA | User manual | Novatel SMART-MR15 GPRS/HSDPA User Manual

Novatel SMART-MR15 GPRS/HSDPA User Manual
SMART-MR15TM GPRS/HSDPA Activation
To activate your SMART-MR15 on a GPRS/HSDPA network, please follow these steps:
1.
Contact your preferred GPRS/HSDPA cellular service
provider.
2.
Obtain an active account and SIM card providing
Label Location
GPRS/HSDPA data services (recommended data plans
for Network RTK are 5GB/Month Rate Plans). You may
need to provide:
a. Product Name: SMART-MR15-HSPA containing Telit UC864-G cellular module
b. Modem Serial Number (IMEI): Modem serial number from SMART-MR15 product label
3.
Install the SIM card into the SMART-MR15. Ensure the SIM door is properly aligned, then secure it in place. See
user manual for guidance. Your product is ready for use.
Secure SIM cover to base using flat-head screwdriver. Screws should be torqued to 4-6 in-lb.
4.
The following commands may be required to configure the cellular data connection:
cellset apn <apn_name>
(always required)
cellset user <user_name>
(if provided by carrier}
cellset password <password>
(if provided by carrier}
5.
Your product is ready for use.
WARNING:
Cellular data consumption and service charges are dependent on the configuration of your SMART-MR15
receiver and data logging rates.
Dealer/Integrator Label Goes Here
For further information, contact NovAtel Customer Support at:
Email:
support@novatel.com
Web:
www.novatel.com
Phone:
1-800-NOVATEL (1-800-668-2835)
U.S. & Canada
+1-403-295-4900 (international)
Fax:
+1-403-295-4901
© Copyright 2011 NovAtel Inc. All rights reserved. Printed in Canada on recycled paper. Unpublished rights reserved
under international copyright laws. Recyclable.
GM-14915107
Rev 1
March 4, 2011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising