TOA | YC-241 | Brochure | TOA N-8050SB Quick start guide

TOA N-8050SB Quick start guide
IP Intercom System
N-8000 Series
Sounding bells, stamping feet, screaming
children – yet still be notified clearly
and in good time of every danger.
N-8000 Series IP Intercom System
1
A versatile, highly reli
user needs for flexible,
TOA’s unique N-8000 IP Intercom System is an integrated audio communication system that employs packet audio technology over the IP network to achieve fast, accurate communications with optimal security
and reliability. Applications range from conversation, paging broadcasting and BGM broadcasting to emergency paging and broadcasting, audio triggering and other security functions. Users can select between
two communication modes according to their needs: Master-to-Master station communication for duplex
conversation at factories, hospitals and various other facilities; or Master-to-Sub station communication for
use by institutions such as schools or prisons. The system frequency response extends to 7 kHz, enabling
reliable transmission of a full range of emergency communications, including clear, easily understandable
PA announcements.
The N-8000 System’s impressive scalability enables users to configure an intercom system that satisfies
their precise requirements, from a small system with just two stations to a large, complex system with up
to 192 components and 3,072 stations. Its open architecture permits flexible interfacing with other systems,
moreover, reducing costs by enabling users to upgrade and expand their intercom system without replacing currently installed equipment, such as surveillance cameras, telephones and access controls. Since
the N-8000 System is not server based, users can use dedicated TOA software to manage settings and
centralized control on a PC and to conduct real-time monitoring of system operation and line status using
an Internet browser.
2
N-8000 Series IP Intercom System
iable IP intercom system designed to meet
, cost-effective configuration and operation
System Features
• System configuration by LAN with intuitive software
• Master-to-Master and Master-to-Sub station communication
• Choice of four wiring configurations:CAT5, 2-core shielded cables, 2 wires or 4 wires
• Integration with access control, voice alarm, CCTV and other such systems
• Time correction
• Operation and stream logs
• System diagnosis
Basic Communication Features
Handset or hands-free conversation, Recall, Redial, Camp on busy, Mic-Off, Remote response, Single-digit dialing,
Call transfer, Comprehensive call-forwarding features, Three-party conferencing
System scalability
The cost-effective N-8000 System can be configured to a scale that meets users’ specific requirements, however small or large.
As few as two stations can be linked in a small system, or up to 192 components can be interconnected to operate as many as
3,072 stations.
Borderless communications
Since the N-8000 System is IP network-compatible, it supports linkage between local areas and other locations worldwide. Centralized PC control with dedicated TOA software enables connection of all exchanges, IP stations and interface units with LAN,
WAN and optical fiber networks.
Integrated communications and safety and features
Efficient centralized control integrates various systems to handle communications ranging from duplex conversations between
stations to paging broadcasts, scheduled broadcasts and BGM broadcasting. The N-8000 System also provides master control for
connection to users’ pre-existing intercom, alarm, surveillance, door entry/departure authorization and other systems as well as to
telephone lines.
Easy installation and maintenance
The surprisingly easy system installation requires a minimum of on-site work, since existing wiring can be used and new components simply plugged in. The dedicated TOA software includes a maintenance application for system status monitoring, troubleshooting and logging as well as for system updating and remote control.
Long-term cost-effectiveness
Since N-8000 software and all calls between stations are free of charge, users enjoy the benefit of significantly lower telephone
bills. Overall ownership costs are also reduced by the open-ended system architecture and network scalability permitting individualized configuration.
Superior sound quality
The N-8000 system provides high-quality audio for BGM, paging and recording applications.
Full logging options
The complete menu of operation and stream logging options includes operation verification, voice communications and line supervision logs, all of which can be archived easily for instant recall.
Internal and external system security
The N-8000 System is equipped with both a round-the-clock internal surveillance function to minimize downtime and a proprietary
packet audio protocol to prevent wiretapping.
N-8000 Series IP Intercom System
3
N-8000 System Overview
Direct Network Connection
LAN/
N-8600MS
Speaker
N-8650DS
N-8610RM
N-8640DS
Door control
Speaker
2-Wire Connection
N-8000EX / 8010EX
PA Amplifier
Speaker
N-8020MS
N-8033MS
N-8000MS
Foot Control Switch
N-8010MS
N-8011MS
Speaker
N-8065MS
Q-TEE
Revolving Light
RS-191
N-8031MS
Speaker
N-8050DS
Door Control
Foot Control Switch
System Specifications
LAN Connections
BGM
Station Connections
PBX Interface
Voice Links
Tie-Line Interface
Max. 384 units (2 units for each of 192
connected Multi-Interface units)
N-8000MI
Max. 3,072 (16 outputs for each of 192
connected Multi-Interface units)
N-8000DI
Max. 6,144 (32 outputs for each of 192
connected Direct Select units)
N-8000AF
Max. 1,536 (8 outputs for each of 192
connected Audio Interface units)
Paging
Outside-Line Interface
External Contact Input
Max. 192 units (total no. of Exchanges,
Interface Units and IP stations)
Max. 3,072 stations (16 stations
connected to each of 192 Exchanges)
Max. 768 links (4 links for each of 192
connected N-8000EX Exchanges)
Zones
Max. 192 zones
Paging Outputs
Max. 384 outputs (2 outputs for each of
192 connected N-8000 Exchanges or
Multi-Interface units)
4
N-8000 Series IP Intercom System
Max. 8 channels (number of channels
selectable from a station)
Max. 384 units (2 units for each of 192
connected Multi-Interface units)
Max. 192 units
Telephone Interface
Max. 192 units (when 192 Telephone
Interface units are connected)
External Contact Output
N-8000MI
Max. 3,072 (16 inputs for each of 192
connected Multi-Interface units)
N-8000DI
Max. 6,144 (32 inputs for each of 192
connected Direct Select units)
N-8000AF
Max. 1,536 (8 inputs for each of 192
connected Audio Interface units)
[Network Relations]
Audio Delay Time
80 ms/320 ms; changeable
Connection Delay Time
Max. 1 second (when 191 multicast
paging destinations are set)
Bandwidth Used
Max. 2.08 Mbps (one-way)/unicast
paging to 16 locations
Max. 130 Kbps (two-way)/per call
4-Wire Connection
/WAN
N-8000AF
N-8400RS
N-8000DI
N-8410MS
Digital announcer
RS-450
Amplifier
Contact
Input
Contact
Output
2
Ex. Activate Alarm
equipment.
1
10
10
1
20
3
10
2
20
RS-460
4
10
3
20
4
20
Recorder
Operation panel
RS-470
(enables colorstation display & remote call from)
N-8000MI
RS-480
Speaker
Revolving Light
RS-481
N-8000AL
Digital Announcer
Contact
Input
2-Core Shielded Wire Connection
Contact
Output
N-8000RS/8010RS
Analog Telephone
Amplifier
PBX
RS-150
N-8000CO
Speaker
EXES-7000/6000/2000
Permits the creation of a wide
variety of system configurations
through the free combination of
individual interface units
• PBX Connection • Office line connection
• Tie-line connection • BGM
• External equipment control
• Remote door control • Conversation recording
• External input broadcast • Paging
• Paging interlock contact output control
• Call station indicator • CCTV interlock
• Remote dialing • Direct select
• Contact bridge • System diagnosis
• Time signal • Time correction
RS-160
Telephone
RS-170
A variety of convenient functions
• Voice calling
• Hands-free conversation
• Automatic connection
• Continuous call
• One-touch dialing
• Call hold
• Automatic call forwarding
• Busy call
• Emergency call interruption
• Paging call
• Emergency all-group paging
• Emergency message broadcasts
• Paging response
• Scan monitor
• Three-party conference
• Door remote
• Emergency paging
• Audio trigger
RS-180
RS-140
RS-143
RS-144
RS-141
Speaker
N-8000 Series IP Intercom System
5
Application Examples
Hospital
Employee exit
Operation Room -1
Operation Room -20
N-8000EX
N-8033MS
Electric Lock,
for unlocking, etc.
Door Station
N-8050DS
N-8033MS
N-8033MS
N-8000EX
N-8033MS
Foot Control Switch
(1 station)
Foot Control Switch
(3 stations)
Control room
SW HUB
N-8011MS
N-8000DI
Indication Board LED
Pilot Lamp
School
Office
Building 2
Building 1
Classrooms
RS-160
17
N-8600MS
1
16
32
33
48
Classrooms
RS-140
N-8000RS Exchange
Classrooms
N-8000RS Exchange
N-8000RS Exchange
LAN
N-8000AF
Telephone
PABX
Audio Interface for
Timer / Gong
N-8000MI
N-8000CO
8 zones selectable
16 zones selectable
other areas
Zone 1
Zone 6
6
N-8000 Series IP Intercom System
Zone 1
Voice Alarm System /
Public Address System
Zone 12
Bank
Security office
Monitoring center
Monitoring center
Control center
7:00~24:00
Recoding target station
24:00~7:00
Forward busy
Nighttime transfer
N-8600MS
N-8600MS
N-8600MS
PC equipped with the N-8000
Recording Software
RS-170
TOA
LAN
Speaker
Intercom
TOA
system
Intercom
N-8640DS
ATM
RS-170
Speaker
•••
system
TOA
Intercom
TOA
N-8640DS
system
N-8640DS
RS-170
N-8640DS
system
Intercom
system
•••
TOA
Speaker
N-8000RS
Intercom
TOA
Intercom
system
ATM
ATM
Factory
Entrance
Administration office
LAN
N-8000EX
CCTV
N-8640DS
N-8000MI
CCTV Monitor
Production floor
N-8000MS
Laboratory
N-8000DI
Pilot Panel
N-8000EX
N-8000EX
N-8031MS
N-8020MS
Amp
Speaker
N-8000MS
N-8031MS
Foot Control Switch
Speaker
Revolving light
Speaker
N-8065MS Q-TEE
N-8020MS
N-8000MS
N-8050DS
N-8000 Series IP Intercom System
7
Application Examples
Parking garage
Parking area
3F
CCTV
RS-480
2F
CCTV
RS-480
1F
Gate
CCTV
RS-480
N-8400RS
N-8640DS
HUB
Router
LAN
Secretary's office
Recorder
Router
HUB
N-8000AF
N-8000DI
PC for monitoring
N-8000CO
N-8600MS
Telephone
Security company
8
N-8000 Series IP Intercom System
Large-scale communication &
Paging system at Airport
Integration of N-8000 with SX-2000 Audio Management System strengthens system capabilities.
A large system with up to 2048 zones is realized on the IP Network.
From a remote location, IP Station* can make a paging call to any selected zone(s).
*N-8610RM and N-8600MS.
Terminal 1
Paging
N-8610RM
SX-2000 series
PA/VA system
2-way
communication
LAN
Local Paging
RM-200SA
Paging
N-8600MS
Max
WAN
2048
zones
Terminal 2
Paging
N-8610RM
SX-2000 series
PA/VA system
2-way
communication
LAN
Local Paging
RM-200SA
Paging
N-8600MS
N-8000 Series IP Intercom System
9
Application Examples
Desk-top
Applicable Exchanges/
Interfaces
Wall-mount
Optional
Bracket
Master/
Door Stations
IP Base
WB-200RM
N-8610RM
N-8640SB
YC-280
N-8640DS
N-8600MS
N-8650DS
YC-280
Master/Door Stations
2-Wire Type
N-8000MS
N-8050DS
YC-280
N-8000EX
N-8010MS
YC-290
N-8031MS
N-8033MS
N-8011MS
N-8010EX
YC-280
10
N-8050SB
N-8031SB
Vandal-resistant type
Outdoor type
RS-150
N-8000RS
RS Sub-stations
4-wire Type
2-core Shielded Type
N-8020MS
N-8000 Series IP Intercom System
YC-280
RS-140
RS-142
RS-144
RS-143
RS-450
RS-160
RS-170
RS-180
RS-460
N-8010RS
RS-470
N-8410MS
N-8400RS
RS-442
RS-480
N-8000 System Software
Setting software
The network settings and the detection of the equipment connected to the local network can be set. The paging system settings, advanced
settings of functions for each individual equipment and settings for the whole system can also be adjusted.
[System Requirements]
OS: Windows® XP Professional SP2 or later/Vista Business/7 Professional
CPU: Pentium® 4 2 GHz or faster
Memory: 1 GB or more
Required component: Microsoft® .NET Framework 3.5 SP1 or later, and
Microsoft® SQL Server 2005 Express Edition
Recording software
Telephone calls, paging, and 3-Party Conference on the N-8000 system and recording of the voice during the Scan Monitor can be managed
as a wav format. After selecting the recording subjected equipment, recording related settings can be adjusted. It is possible to easily search
the recorded audio files and also to export the audio files to an external storage.
[System Requirements]
OS: Windows® 7 Professional SP1(32/64bit)
Screen resolution: Over 1024 × 768 pixels
Required component: Microsoft® .NET Framework 4
[Recommended Specifications]
CPU: Intel® Core® i5-2400 CPU @3.10GHz or faster
Memory: 4 GB or more
Free Hard Disk Space: 100GB or more
(About 2.7 GB is used per sound source at 24-hour continuous recording)
Maintenance software
This software displays the equipment name, station number, station name, etc. of individual equipment components within the system in the
form of an at-a-glance list. System check function is used to confirm equipment firmware versions, update firmware, check connections
between a PC and equipment components and between components, download various equipment log and setting files, and perform
equipment clock settings. Although the above functions can be done on the browser, use of the N-8000 Maintenance Software permits such
functions to be performed simultaneously for multiple components. Moreover, it displays the operation status of individual components in real
time. Equipment operation logs can also be automatically saved to a designated file on the PC.
[System Requirements]
OS: Windows® XP SP2 or later
Required component: Microsoft® .NET Framework 3.5 SP1 or later
Screen resolution: Over 800 x 600 pixels
[Recommended Specifications]
OS: Windows® Vista Business/7 Professional
CPU: Pentium® 4, 2 GHz or faster
Memory: 2 GB or more
Screen resolution: Over 1024 x 768 pixels
*Microsoft, Windows XP, Windows Vista, Windows 7 and .NET Framework are either registerd trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
*Intel, Pentium and Intel Core are either trademarks of Intel Corporation in the United States and/or other countries.
*By use of different software, it is possible to configure for a large amount of telephone calls. For more information, please contact your nearest dealer.
N-8000 Series IP Intercom System
11
Key Functions
Paging Function
Allows the master station as well as external input equipment to initiate paging by PA
equipment or the speakers of individual stations. Operators can use the setup software to configure up to 192 paging
zones to which paging calls can be made as desired.
N-8600MS
WAN
LAN
Internet
IP-VPN
or
N-8600MS
N-8000AF
PA Amplifier
Speaker
N-8000MI
Remote Control of External System
Makes it possible to execute door lock control easily through
a contact output when the master station is engaged in ongoing conversation with the N-8640DS or N-8050DS Door
Station.
N-8640DS
WAN
LAN
N-8000MS
N-8000EX or N-8010EX
Internet
IP-VPN
N-8000MI
Door Control
Privacy Mode
Activated by a control on the RS-140 Switch Panel, blocks paging calls to connected speakers
and prevents scan monitoring except for emergency calls.
WAN
LAN
Internet
IP-VPN
N-8600MS
X
N-8000RS or N-8010RS
Speaker
RS-140
Direct Select
Configures an operation panel equipped with indicator lamps and control buttons for the master
station. Compatible with other stations, the panel assigns the various contact input and output channels to the master
station and substations for purposes of identifying which substation is calling the programmed master station.
WAN
LAN
Pilot Panel
N-8000DI
N-8000DI only
Internet
IP-VPN
N-8640DS
12
N-8000 Series IP Intercom System
Scan Monitor
Enables remote security monitoring by allowing the master station as well as analog telephones
and external telephones to audio monitor two or more pre-programmed stations.
N-8600MS
N-8000MS
N-8000EX
WAN
LAN
Internet
IP-VPN
N-8640DS
N-8000EX
N-8000MS
N-8000RS
RS-180
BGM Broadcasting
Enables music from any of eight BGM sources connected to the N-8000MI to be
distributed through speakers at the master and door stations.
N-8000MS
Sound Source
CD player
MP3 player
MD player
N-8000MS
WAN
LAN
N-8000MI
Internet
IP-VPN
PA Amplifier
N-8000EX or N-8010EX
Speaker
N-8600MS
N-8600MS
Audio Trigger
Sets off an alarm if audio input to a pre-programmed station’s microphone fulfils pre-set conditions
(detection time or signal level). Examples include calls to the designated master station or contact output generated by
another interface unit.
WAN
LAN
N-8050DS
N-8000EX
Internet
IP-VPN
N-8600MS
N-8050DS only
N-8000 MI
or
N-8000DI
Revolving Light
N-8000 Series IP Intercom System
13
Specifications
IP Base Station
IP Multifunctional Master Station
IP Remote Microphone Station
N-8600MS
N-8610RM
Power Source
Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))
Power Consumption
3 W (max.)
Use of the AC adapter (12 V DC): 4W (microphone only), 8.5W (when
connecting 4 RM-210 Extension units)
Use of the PoE (48 V DC): 5.2W (microphone only), 7.5W (when connecting 4 RM-210 Extension units)
Speech Method
Hands-free or handset conversation
Hands-free conversation (use of goose-neck microphone)
Audio Frequency Range
300 Hz – 7 kHz
External Speaker Terminal
Maximum output 0.5W, 8Ω, screwless connector (2P)
-
No. of Connectable Expansion
-
Max.4 units (maximum 2 units at PoE power supply)
Network Section
Network I/F
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission System
Unicast, Multicast
Voice Packet Loss Recovery
Silence insertion
Audio Delay Time
80ms, 320ms (controllable on the software)
Finish
Body, Handset: ABS resin, gray
ABS resin, blueishgray
Dimensions
148 (W) x 208 (H) x 70.5 (D)mm (excluding a curl cord section)
190 (W) x 76.5 (H) x 215 (D)mm (excluding microphone)
Weight
770 g
700 g
Options
Wall mounting bracket: YC-280, AC adapter: AD-1210P, AD-1215P
Remote microphone extension: RM-210
Wall mounting bracket: WB-RM200, AC adapter, AD-1210P, AD1215P
0 dB= 1 V
IP Door Station
IP Door Station
N-8640DS
IP Door Station Board Unit
N-8650DS
N-8640SB
Power Source
Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))
Power Consumption
5 W (max.)
Speech Method
Hands-free conversation
Audio Frequency Range
300 Hz – 7 kHz
Contact Input
1 channel, no-voltage make contact input, open circuit voltage: 5V DC, short circuit current: 10mA or less, unterminated ends
Contact Output
Open collector output, 4 channels, withstand voltage: 30V DC, control current; Max. 50mA (4 output 1COMMON), unterminated ends
Relay contact output, 1 channel, withstand voltage; 30V DC. control current: Max. 500mA, unterminated ends
External Speaker Terminal
0.5 W, 8 ohms
Network Section
Network I/F
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission System
Unicast, Multicast
Voice Packet Loss Recovery
Silence insertion
Audio Delay Time
80ms, 320ms (controllable on the software)
Finish
Panel: Stainless steel, hairline/ Call button: Metal
ABS resin, dark gray
-
Dimensions
115 (W) x 162 (H) x 58.5 (D)mm
117.2 (W) x 162 (H) x 60 (D)mm
79 (W) x 134 (H) x 53 (D)mm
Weight
780 g
400 g
Options
For flush-mount: 3-gang electrical box or Back Box YC-150, Wall surface-mount: Wall mount Box
YS-13A, AC adapter: AD-1210P, AD-1215P
0 dB= 1 V
14
N-8000 Series IP Intercom System
350 g
AC adapter: AD-1210P, AD-1215P
2-Wire Type
Station
Multifunctionnal
Master Station
Standard
Master Station
N-8000MS
N-8010MS
Standard Hands-free
Master Station
Industrial-use
Master Station
N-8011MS
Power Source
48V DC (supplied from the IP network intercom exchange)
Power Consumption
2.4 W (max.)
Wiring Method
1 set of twisted pair cable
Speech Method
Hands-free or handset conversation
Audio Frequency Range
300 – 7,000Hz
Transmission Range
Max. 1500 m (ø0.65 mm. Loop resistance 170Ω)
Dial-in Contact Output
-
External Speaker Terminal
0.6W, 8Ω, screwless
connector (2P)
Heavy Industrial
Station
N-8020MS
N-8065MS Q-TEE
Hands-free conversation
Hands-free or handset conversation
Hands-free conversation
-
-
Open collector output
(The contacts have polarity.)/
Withstand voltage: Max. 30V DC,
Control current: Max. 50mA,
screwless connector (2P)
-
-
-
0.6W, 8Ω, screwless connector
(2P)
0.5W, 8Ω, screwless connector
Dust/Water Protection
-
-
-
IP54
IP65
Resistance to Environment
-
-
-
-
Vandal-, fire- and shock-proof
Finish
Body, Handset: ABS resin, gray
Body: ABS resin, gray
Body, Handset: ABS resin, gray
Body: Aluminum, orange
Dimensions
148 (W) x 208 (H) x 70.5 (D)mm(excluding a curl
cord section)
2 (W) x 195 (H) x 56.1 (D)mm
170 (W) x 220 (H) x 97.8 (D)mm
(excluding a curl cord section)
160 (W) x 360 (H) x 91 (D) mm
(without cable glands)
Weight
800 g
Options
Wall mounting bracket: YC-280
700 g
400 g
1 kg
3.75 kg
Wall mounting bracket: YC-290
Wall mounting bracket: YC-280
-
0 dB= 1 V
Flush-Mount
Master Station
Flush-Mount
Hands-free
Master Station
Master Station
Board
Door Station
N-8033MS
N-8031MS
N-8031SB
N-8050DS
Door Station
Board
N-8050SB
Power Source
48V DC (supplied from the IP network intercom exchange)
Power Consumption
2.4 W (max.)
Wiring Method
1 set of twisted pair cable
Speech Method
Hands-free or handset conversation
Audio Frequency Range
300 – 7,000Hz
Transmission Range
Max. 1500 m (ø0.65 mm. Loop resistance 170 Ω)
Contact Output
-
External Dial Input
No-voltage make contact input, open voltage: 5V DC, short-circuit current: 1mA,
screwless connector (5 pins)
-
-
Housing Protection
-
-
-
BS EN62262: 2002: IK02
equivalent
-
Dust/Water Protection
IP65 (Note that panel edges
must be sealed at
installation.)
-
-
IP54 (Note that panel edges
must be sealed at installation.)
-
Resistance to Environment
Chemical Resistant
-
-
-
-
Finish
Membrane switch (Front
pasting): Polyester film
Panel: Stainless steel
(SUS304), hairline
-
Panel: Stainless steel,
hairline/ Call button: Metal
-
Dimensions
115 (W) x 254 (H) x 54.6 (D)mm
70 (W) x 185 (H) x 20.6
(D)mm
115 (W) x 162 (H) x 54 (D)mm
67 (W) x 128.3 (H) x 26 (D)
mm
Weight
850 g
205 g
680 g
100 g (including accessories)
Options
Back Box YC-841
Handset: RS-191
Flush-mount: 3-gang electrical
box or Back Box YC-150
Wall surface-mount: Wall
mount Box YS-13A
-
-
Flush-mount: Back Box, YC241
Wall surface-mount:
Wall mount Box YC-251
Handset: RS-191
-
Open collector output, withstand voltage: Max. 30V DC,
control current: Max. 50mA, one shot: can be set from1 to 9 sec,
screw terminal (polarized)
0 dB= 1 V
N-8000 Series IP Intercom System
15
Specifications
IP Network Intercom Exchange
IP Network
Exchange
N-8000EX
N-8010EX
Power Source
CE ver.: 220 - 240 V AC, 50/60 Hz / CU ver.: 120 V AC, 50/60 Hz
Power Consumption
500 W (at rated), 75 W (max.)
Interface Section or Station
Speech Link
Internal: 4/External: 8
Line Capacity
Up to 16 stations
Wiring Method
1 set of twisted pair cables
Internal: 1/External: 2
Transmission Range
Max. 1500 m (ø0.65 mm. Loop resistance 170 Ω)
Paging Output
Audio: 2 channels Max. 0dB*, 600Ω, balanced, detachable terminal block
Control: 2 channels, no-voltage make contact output (24V DC/0.5A),
removable terminal block
Station paging only
Network Section
Network I/F
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission System
Unicast, Multicast
Voice Packet Loss Recovery
Silence insertion
Audio Delay Time
80ms, 320ms (controllable on the software)
Finish
Pre-coated steel plate, black, 30% gloss
Dimensions
420 (W) x 44.3 (H) x 356 (D)mm
Weight
4.1kg
4.2kg
0 dB= 1 V
Interface
Unit
Multi Interface Unit
Direct Select Unit
N-8000MI
Audio Interface Unit
N-8000DI
N-8000AF
Power Source
CE ver.: 220 - 240 V AC, 50/60 Hz / CU ver.: 120 V AC, 50/60 Hz
Power Consumption
CE ver.: 24W (230mA) (max.)/CU ver.: 21W (330mA)
(max.)
16 W (Max.)
7 W (Max.)
Audio Input
Input: 2 inputs (2P/input), Max. 0dB*, under 600Ω,
balanced, with a semi-fixed volume for adjustment (0 to
–25dB)
Control: 2 inputs (2P/input), no-voltage make contact input, open voltage: 12V DC, short-circuit current: 10mA
Removable terminal block (8 pins)
-
1 input (transformer isolated), -58dB* to
0dB*, 2kΩ, balanced (MIC/LINE input, controllable on the software) with input volume
control knob, removable terminal block (3
pins)
Audio Output
Output: 2 outputs (2P/output), Max. 0dB*, under 600Ω,
balanced
Control: 2 outputs (2P/output), relay contact output,
contact capacity: 24V DC/0.5A
Removable terminal block (8 pins)
-
1 output (transformer isolated), 0dB*, 600Ω,
balanced, removable terminal block (3 pins)
Contact Input
16 inputs, no-voltage make contact input, open voltage;
12V DC, short-circuit current: 10mA, removable terminal
block (18 pins) (1 common terminal for 4 inputs)
32 inputs, no-voltage make contact input,
open voltage: 24V DC, short-circuit current:
5mA or less, removable terminal block (20
pins) (1 common terminal for 4 inputs)
8 inputs, no-voltage make contact input,
open voltage: 24V DC, short-circuit current:
5mA or less, removable terminal block
(10 pins), (1 common terminal for 4 inputs)
Contact Output
16 outputs, relay contact output, contact capacity: 24V
DC/0.5A, removable terminal block (18 pins)
32 outputs, relay contact output, contact
capacity: 24V DC/2 - 500mA, removable
terminal block (32 pins)
8 outputs, relay contact output, contact
capacity: 24V DC/2 - 500mA, removable
terminal block (32 pins)
-
Silence Insertion
Network Section
Network I/F
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission
System
Unicast, Multicast
Voice Packet Loss Recovery
Silence insertion
Audio Delay Time
80ms, 320ms (controllable on the software)
Finish
Pre-coated steel plate, black, 30% gloss
Dimensions
420 (W) x 44.3 (H) x 239.5 (D)mm
420 (W) x 44.3 (H) x 267 (D)mm
210 (W) x 44.3 (H) x 267 (D)mm
Weight
2.8 kg
2.8 kg
1.7 kg
Options
-
Wall mounting bracket: YC-850
Rack mounting bracket: MB-15B-BK,
MB-15B-J
Wall mounting bracket: YC-850
0 dB= 1 V
16
N-8000 Series IP Intercom System
Interface
Unit
Telephone Interface Unit
C/O Interface Unit
N-8000AL
Power Source
CE ver.: 220 - 240 V AC, 50/60 Hz / CU ver.: 120 V AC, 50/60 Hz
Power Consumption
8 W (Max.)
N-8000CO
7 W (Max.)
Line: Public Switched telephone networks
Number of Lines
1 line
Selective Signal Type
DTMF Signal
Signal System
-
Compatible with loop start signaling
Monitor Function
Line Loop detection
-
Control Function
Caller ID function
-
Wiring Method
1 pair of twisted pair cables
Transmission Range
Max. 1500 m (ø0.65 mm. Loop resistance 170 Ω)
Network Section
Network I/F
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission System
Unicast, Multicast
Voice Packet Loss Recovery
Silence insertion
Finish
Pre-coated steel plate, black, 30% gloss
Dimensions
210 (W) x 44.3 (H) x 267 (D)mm
Weight
1.7 kg
Options
Rack mounting bracket: MB-15B-BK, MB-15B-J, Wall mounting bracket: YC-850
0 dB= 1 V
IP Interface
Module
IP Interface Module
SX-200IP
Network Section
Network I/F
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Cpmmectpr
RJ45 connector
Voice sampling frequency
16 kHz, 8 kHz (controllable on the software)
48 kHz, sample rate is used for SX-2000 system only
Quantifying bit number
16-bit
Voice encoding method
Sub-band ADPCM, Cryptosystem
Voice Packet Loss Recovery
Silence insertion
Audio Delay Time
80ms, 320ms (controllable on the software)
Indicator
Operation indicator (RUN)
Finish
Panel: Pre-coated steel plate, black, 30% gloss
Dimensions
35(W) x 119.5(H) x 178.4 (D) mm
Weight
150 g
N-8000 Series IP Intercom System
17
Specifications
Sub-station Interface Unit
2-Core
Shielded
Cable Type
N-8000RS
N-8010RS
Power Source
CE ver.: 220 - 240 V AC, 50/60 Hz / CU ver.: 120 V AC, 50/60 Hz
Power Consumption
CE ver.: 40W(at rated), 50W(max.) / CU ver.: 35W(at rated), 45W(max.)
CE ver.: 32W (at rated), 38W (max.) / CU ver.: 26W (at rated), 32W
(max.)
Interface Section for Sub-station
Number of links
16 lines
Number of Speech Links
2 links
Transmission Range
500m/ø0.5mm, 800m/ø0.65mm, 1300m/ø0.9mm
1 link
Wiring Method
Two-core shielded cable
Network Section
Network I/F
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission System
Unicast, Multicast
Voice Packet Loss Recovery
Silence insertion
Audio Delay Time
80ms, 320ms (controllable on the software)
Finish
Pre-coated steel plate, black, 30% gloss
Dimensions
420 (W) x 44.3 (H) x 325.5 (D)mm
Weight
3.9 kg
Options
Wall mounting bracket: YC-850
3.8 kg
Sub-station
(Emergency use)
Sub-station
Sub-station
(Outdoor Vandal-Resistant Type)
(Indoor Vandal-Resistant Type)
RS-180
RS-160
Contact Output
Open collector output: 24V DC, 30mA (The
open collector output is kept turned on till the
conversation is finished after the call button was
pressed.)
-
Finish
Panel: Stainless steel (SUS304), hairline
Call Button: Metal, red
Printed Circuit Board: Weather-resistant coating
Panel: Stainless steel (SUS304), hairline
Call Button: Metal
RS-150
Panel: Stainless steel (SUS304), hairline
Call Button: Resin, black
Dimensions
120 (W) x 120 (H) x 58.5 (D)mm
120 (W) x 120 (H) x 57.5 (D)mm
120 (W) x 120 (H) x 48.5 (D)mm
Weight
570g
540 g
410 g
Options
2-gang electrical box: YC-302,
Indoor wall-mount box: YC-822,
Outdoor wall-mount box: YC-823
2-gang electrical box: YC-302,
Indoor wall-mount box: YC-822,
Outdor wall-mount box: YC-823
IP Intercom
Switch Panel
RS-144
Call-in Switch
18
RS-170
Sub-station
(Indoor use)
Momentary (EMERGENCY, NORMAL)
IP Intercom
Switch Panel
Switch Panel
IP Intercom Switch Board
RS-143
RS-140
Momentary
Privacy Switch
-
Wiring
Two-core shielded cable
Finish
Panel: Stainless steel, hairline
Call-in Switch: Resin, red
Privacy Switch (normal): Resin, white
Dimensions
70 (W) x 115 (H) x 28.6 (D)mm
Weight
80 g
Options
Flush-mount box: YC-801, Wall-mount box: YC-802, Handset: RS-141
N-8000 Series IP Intercom System
2-gang electrical box: YC-302, Indoor wall-mount box: YC-822
RS-142
Call Switch Wiring
4 cables (for 2 momentary
switches)
Wiring
Two-core shielded cable
Weight
30 g
Latching
Panel: Stainless steel, hairline
Call-in Switch: Resin, red
Panel: Stainless steel, hairline
Call-in Switch: Resin, red
Privacy Switch (normal): Resin,
white
Sub-station Interface Unit
4-Wire
Type
Analog Standard Master Station
N-8400RS
N-8410MS
Power Source
CE ver.: 220 - 240 V AC, 50/60 Hz / CU ver.: 120 V AC, 50/60 Hz
Power Source
Power Consumption
CE ver.: 35 W(at rated), 50 W(max.) / CU ver.: 30 W(at rated),
45W(max.)
24V DC (supplied from the sub station
interface unit N-8400RS)
Current Consumption
Max. 30 mA
Wiring Method
2 sets of twisted pair cables
Interface Section for Sub-station
Number of links
16 lines
Speech Method
Hands-free or handset conversation
Number of Speech Links
2 links
Audio Frequency Range
300 Hz – 7 kHz
Transmission Range
1 km/ø0.5mm, 1.5 km/ø0.65mm, 2 km/ø0.9mm
Transmission Range
Wiring Method
2 sets of twisted pair cables
1 km/ø0.5mm(AWG24), 1.5
km/ø0.65mm(AWG22), 2 km/
ø0.9mm(AWG19)
Finish
Body, Handset: ABS resin, gray
Dimensions
148 (W) x 208 (H) x 70.5 (D)mm
(excluding a curl cord section)
Weight
720 g
Options
Wall mounting bracket: YC-280
Network Section
Network I/F
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission
System
Unicast, Multicast
Voice Packet Loss Recovery
Silence insertion
Audio Delay Time
80ms, 320ms (controllable on the software)
Finish
Pre-coated steel plate, black, 30% gloss
Dimensions
420 (W) x 44.3 (H) x 325.5 (D)mm
Weight
4 kg
Options
Wall mounting bracket: YC-850
Sub-station
(Emergency use)
0 dB= 1 V
Sub-station
Sub-station
(Outdoor Vandal-Resistant Type)
(Indoor Vandal-Resistant Type)
Sub-station
(Indoor use)
RS-481
RS-480
RS-470
Call-in Switch
Momentary (Emergency call: Press twice within 400 ms)
Contact Output
Open collector output: 30V DC, 30mA
Wiring
Twisted pair cables (2-pair)
Dust/Water Protection
IP54
Finish
Panel: Stainless steel, hairline
Call switch: Metal, red
Circuit Board: Weather-resistant coating
RS-460
RS-450
Panel: Stainless steel, hairline
Call switch: Metal, silver
Panel: Stainless steel, hairline
Call Switch: Resin, black
Dimensions
120 (W) x 120 (H) x 50.5 (D)mm
120 (W) x 120 (H) x 49.5 (D)mm
Weight
575 g
550 g
540 g
120 (W) x 120 (H) x 41.5 (D)mm
Options
2-gang electrical box: YC-302, Handset: RS-481
Indoor wall-mount box: YC-822,
Outdoor wall-mount box: YC-823
2-gang electrical box: YC-302,
Indoor wall-mount box: YC-822,
Outdor wall-mount box: YC-823
2-gang electrical box: YC-302, Indoor wall-mount box: YC-822
510 g
IP Intercom Switch Board
RS-442
Call Switch Wiring
6 cables (for 3 momentary
switches)
Wiring
Twisted pair cable(2-pair)
Weight
140 g
N-8000 Series IP Intercom System
19
YC-850
Wall-Mount Bracket
Designed to mount N-8000MS, N-8010MS, N8020MS, N-8410MS, and N-8600MS on a wall.
Finish: Surface-treated steel plate, gray, paint
Dimensions: 100 (W) x 140 (H) x 31.8(D) mm
YC-290
YC-251
YC-241
Wall-Mount Bracket
Flush-Mount Back Box
Designed to mount N-8031MS in a wall.
Finish: Colored chrome painting
Dimensions: 276 (W) x 119 (H) x 67 (D) mm
YC-801
Flush-Mount Box
Surface-Mount back Box
Designed to mount N-8031MS on a wall.
Finish: Surface-treated steel plate, white
Dimensions: 124 (W) x 258.5(H) x 50.5(D) mm
YC-150
Flush-Mount Back Box
Designed to flush-mount N-8050DS and N-8640DS
in a wall.
Finish: Zinc-plating
Dimensions: 184 (W) x 119 (H) x 57 (D) mm
YS-13A
Surface-Mount Back Box
Designed to flush-mount RS-140, RS-143 and RS144 in a wall.
Finish: Colored chrome painting
Dimensions: 72 (W) x 119 (H) x 57 (D) mm
Designed to surface-mount N-8050DS and
N-8640DS in a wall.
Finish: Zinc-plating
Dimensions: 163.5 (W) x 116.5 (H) x 55 (D) mm
YC-802
Designed to flush-mount RS-140, RS-143 and RS144 in a wall.
Finish: Surface-treated steel plate, white
Dimensions: 75 (W) x 124 (H) x 50.5 (D) mm
YC-302 2-Gang Electrical Box
Designed to mount RS-150, RS-160, RS170,RS-180, RS-450, RS-460, RS-470 and RS-480
in a wall.
Finish: SPHT, MFZn4 (glazed chromate)
Dimensions: Outlet box: 102 (W) x 102 (H) x 44 (D)
mm / Cover: 106 (W) x 106 (H) x 13 (D)mm
YC-841
YC-823
Wall-Mount Box
Back Box
Designed to flush-mount N-8033MS on a wall.
Finish: Surface-treated steel plate, white
Dimensions: 119 (W) x 258 (H) x 57 (D) mm
AD-1215P
N-8000 Series IP Intercom System
Outdoor Wall-Mount Box
Designed to mount RS-170, RS-180, RS-470 and
RS-480 on a wall.
Finish: Stainless plate, off-white
Dimensions: 124 (W) x 124 (H) x 62 (D) mm.
AC Adapter
YC-822
AC adapters to operate the IP
Station on AC.
Power Source :
AD-1210P: 230 V AC
AD-1215P: 100 - 240 V AC
Designed to mount RS-150, RS-160, RS-170, RS180, RS-450, RS-460, RS-470 and RS-480 on a wall.
Finish: Surface-treated steel plate, white
Dimensions: 124 (W) x 124 (H) x 61 (D) mm
Specifications are subject to change without notice. (1706) 833611000102 t
20
Wall-Mount Bracket
Designed to mount N-8000RS, N-8010RS,
N-8400RS, N-8000DI, N-8000AF, N-8000AL and
N-8000CO on a wall.
Finish:Surface-treated steel plate, black, 30% gloss
Dimensions: 45.1 (W) x 220 (H) x 10 (D)mm
Designed to mount N-8011MS on a wall.
Finish: Surface-treated steel plate, gray, paint
Dimensions: 64 (W) x 131.5 (H) x 31.8 (D) mm
AD-1210P
YC-280
Indoor Wall-Mount Box
www.toa.jp
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising