TOA RS-480 Quick start guide

TOA RS-480 Quick start guide
 IP Intercom System
( idl ) All-Purpose IP Intercom System with
TOA's Advanced Packet Audio Technology
Assuring Higher Levels of Security,
Versatility and Sound Quality
A versatile, highly reliable IP inter
for flexible, cost-effective configur
TOA’s unique N-8000 IP Intercom System is an integrated audio
communication system that employs packet audio technology over the IP
network to achieve fast, accurate communications with optimal security and
reliability. Applications range from conversation, paging broadcasting and
BGM broadcasting to emergency paging and broadcasting, audio triggering
and other security functions. Users can select between two communication
modes according to their needs: Master-to-Master station communication for
duplex conversation at factories, hospitals and various other facilities; or
Master-to-Sub station communication for use by institutions such as schools
or prisons. The system frequency response extends to 7 kHz, enabling
reliable transmission of a full range of emergency communications, including
clear, easily understandable PA announcements.
The N-8000 System’s impressive scalability enables users to configure an
intercom system that satisfies their precise requirements, from a small
system with just two stations to a large, complex system with up to 192
components and 3,072 stations. Its open architecture permits flexible
interfacing with other systems, moreover, reducing costs by enabling users
to upgrade and expand their intercom system without replacing currently
installed equipment, such as surveillance cameras, telephones and access
controls. Since the N-8000 System is not server based, users can use
dedicated TOA software to manage settings and centralized control on a PC
and to conduct real-time monitoring of system operation and line status
using an Internet browser.
ZI Rs
01 N-8000 Series IP Intercom System
System Features
- System configuration by LAN with intuitive
software
* Master-to-Master and Master-to-Sub station
communication
* Choice of four wiring configurations:CAT5,
2-core shielded cables, 2 wires or 4 wires
* Integration with access control, voice alarm,
CCTV and other such systems
* Time correction
* Operation and stream logs
* System diagnosis
Basic
Communication
Features
* Handset or hands-free conversation
* Recall + Redial » Camp on busy * Mic-Off
* Remote response * Single-digit dialing
* Call transfer » Comprehensive call-
forwarding features
» Three-party conferencing
System scalability
The cost-effective N-8000 System can be
configured to a scale that meets users’ specific
requirements, however small or large. As few as
two stations can be linked in a small system, or up
to 192 components can be interconnected to
operate as many as 3,072 stations.
Borderless communications
Since the N-8000 System is IP network-compatible,
it supports linkage between local areas and other
locations worldwide. Centralized PC control with
dedicated TOA software enables connection of all
exchanges, IP stations and interface units with
LAN, WAN and optical fiber networks.
com system designed to meet user needs
ation and operation
Integrated communications and safety
features
Efficient centralized control integrates various
systems to handle communications ranging from
duplex conversations between stations to paging
broadcasts, scheduled broadcasts and BGM
broadcasting. The N-8000 System also provides
master control for connection to users’ pre-existing
intercom, alarm, surveillance, door entry/departure
authorization and other systems as well as to
telephone lines.
Easy installation and maintenance
The surprisingly easy system installation requires
a minimum of on-site work, since existing wiring
can be used and new components simply plugged
in. The dedicated TOA software includes a
maintenance application for system status
monitoring, troubleshooting and logging as well as
for system updating and remote control.
Long-term cost-effectiveness
Since N-8000 software and all calls between
stations are free of charge, users enjoy the benefit
of significantly lower telephone bills. Overall
ownership costs are also reduced by the
open-ended system architecture and network
scalability permitting individualized configuration.
Superior sound quality
The N-8000 system provides high-quality audio for
BGM, paging and recording applications.
Full logging options
The complete menu of operation and stream
logging options includes operation verification,
voice communications and line supervision logs,
all of which can be archived easily for instant
recall.
Internal and external system security
The N-8000 System is equipped with both a
round-the-clock internal surveillance function to
minimize downtime and a proprietary packet audio
protocol to prevent wiretapping.
IP Intercom System 02
03
N-8000 System Overview
Direct Network Connection
N-8610RM
“ N-8600MS
N-8510MS
Speaker
2-Wire Connection
PA Amplifier
Speaker
N-8650DS
К т Æ, a! ENEE, Speaker
40DS Y
Door control
N-8640DS
N-8000EX / 8010EX
a... ”
N-8033MS N-8000MS
N-8010MS
N-8011MS
N-8065MS
Q-TEE
J
Revolving Light
<> ¡ib
8
i RS-191 i
N-8031MS N-8050DS
Foot Control Switch Speaker Speaker Door Control
Foot Control Switch
System Specifications
LAN Connections BGM External Contact Output [Network Relations]
Max. 192 units (total no. of Exchanges, Max. 8 channels (number of channels N-8000MI Audio Delay Time
Interface Units and IP stations)
Station Connections
Max. 3,072 stations (16 stations
connected to each of 192 Exchanges)
Voice Links
Max. 768 links (4 links for each of 192
connected N-8000EX Exchanges)
Paging
Zones
Max. 192 zones
Paging Outputs
Max. 384 outputs (2 outputs for each of
192 connected N-8000 Exchanges or
Multi-Interface units)
IP Intercom System
selectable from a station)
PBX Interface
Max. 384 units (2 units for each of 192
connected Multi-Interface units)
Tie-Line Interface
Max. 384 units (2 units for each of 192
connected Multi-Interface units)
Outside-Line Interface
Max. 192 units
Telephone Interface
Max. 192 units (when 192 Telephone
Interface units are connected)
Max. 3,072 (16 outputs for each of 192
connected Multi-Interface units)
N-8000DI
Max. 6,144 (32 outputs for each of 192
connected Direct Select units)
N-8000AF
Max. 1,536 (8 outputs for each of 192
connected Audio Interface units)
External Contact Input
N-8000MI
Max. 3,072 (16 inputs for each of 192
connected Multi-Interface units)
N-8000DI
Max. 6,144 (32 inputs for each of 192
connected Direct Select units)
N-8000AF
Max. 1,536 (8 inputs for each of 192
connected Audio Interface units)
80 ms/320 ms; changeable
Connection Delay Time
Max. 1 second (when 191 multicast
paging destinations are set)
Bandwidth Used
Max. 2.08 Mbps (one-way)/unicast
paging to 16 locations
Max. 130 Kbps (two-way)/per call
y
ss
À
Contact
Output
--------
1
1
1
1
I
1
1
1
I < Se
e
Ex. Activate Alarm «Tet
SE
equipment.
Operation panel
N-8000DI
a
N-8000AF
Digital announcer
<é--------------
Amplifier
Ron
у
Recorder
(enables colorstation display & remote call from)
A
Ÿ
‘
у Y Output
Digital Announcer
TE Y
Amplifier -
PBX
Speaker
N-8000MI
I
EXES-7000/6000/2000
Permits the creation of a wide
variety of system configurations
through the free combination of
individual interface units
* PBX Connection + Office line connection
* Tie-line connection + BGM
* External equipment control
- Remote door control - Conversation recording
External input broadcast * Paging
+ Paging interlock contact output control
» Call station indicator + CCTV interlock
* Remote dialing * Direct select
* Contact bridge * System diagnosis
Time signal - Time correction
N-8000AL
Analog Telephone
Telephone
A variety of convenient functions
* Voice calling
* Hands-free conversation
* Automatic connection
* Continuous call
* One-touch dialing
* Call hold
- Automatic call forwarding
* Busy call
* Emergency call interruption
* Paging call
* Emergency all-group paging
* Emergency message broadcasts
* Paging response
* Scan monitor
* Three-party conference
* Door remote
* Emergency paging
* Audio trigger
4-Wire Connection
N-8400RS
RS-481
“ N-8410MS
пов
Mza
RS-450
na
i a a =
RS-460
Revolving Light
2-Core Shielded Wire Connection
N-8000RS/8010RS
RS-140
|
|
a
-0 | =
цен) my
RS-143 RS-144
RS-141 !
Speaker
IP Intercom System (4
Application Examples
Hospital
Employee exit
a. |
Operation Room -1 * >
Door Station Electric Lock,
Operation Room -20
N-8050DS for unlocking, etc. :
* -
` —e —
N-8000EX = N-8033MS = N-8033MS
= N-8033MS 1 N-8033MS
= —
EN
N-8000EX Foot Control Switch
Foot Control Switch (1 station)
(3 stations) Control room
SW HUB
N-8000DI 5
= EEE Indication Board LED
Pilot Lamp
School
‚al Classrooms ‚al IT IT ET
“je “je “je
RS-160 oy UU a e Y и
©
—— 17 æ 33 48 ©
a | | VAN Va
- | Classrooms Classrooms
RS-140
N-8000RS Exchange N-8000RS Exchange
N-8000RS Exchange
LAN
Audio Interface for
: N-8000AF Timer / Gong
N-8000MI
Telephone N-8000CO
PABX — —
8 zones selectable 16 zones selectable
other areas
Zone 1 Zone 1
Zone 6 Voice Alarm System / Zone 12
Public Address System
05 N-8000 Series IP Intercom System
Recoding target station
PC equipped with the N-8000
Monitoring center Security office
Control center
24:00~7:00
7:00~24:00 Za
f Nighttime transfer
CE / N-8600MS
Monitoring center
Recording Software
I
Speaker Speaker
N-8640DS
ATM ATM
Factory
N-8000RS
Speaker
RS-170
N-8640DS
N-8640DS N-8640DS
ATM
Administration office
N-8000EX
N-8640DS
N-8000MI
CCTV Monitor
N-8000DI
N-8031MS
Pe e
Sass EEEEEEE
Foot Control Switch Speaker
N-8000EX
N-8000EX Amp
CCTV
Production floor
Ня
Speaker
Revolving light Speaker N-8065MS Q-TEE N-8020MS N-8000MS
N-8050DS
N-8000 Series IP Intercom System 06
Application Examples
Parking garage
Parking area ,
N-8400RS
N-8640DS
Router
Secretary's office
Router
N-8000AF
N-8000DI N-8000CO
N-8600MS
Security company
07 N-8000 Series IP Intercom System
Large-scale communication &
Paging system at Airport
Integration of N-8000 with SX-2000 Audio Management System strengthens system capabilities.
A large system with up to 2048 zones is realized on the IP Network.
From a remote location, IP Station* can make a paging call to any selected zone(s). *N-8610RM and N-8600MS.
|
En N-8610RM Paging
FT ))))))))))))))))))))))))))))))) e e a
=
SX-2000 series
PA/VA system =
2-way
communication
N
Local Paging
MMMM) )
RM-200SA
Paging
mp) )
2 »»))
33000330333. 33333 3333333)
N-8600MS
Max
2048
zones
WAN
и
2-way
communication
N
))))))P1)IPINNNNINNIIIIINIIIIIIIIGNIDIINIPINIIPII),,
Paging
mp) )
SX-2000 series
PA/VA system =
Local Paging
>>») }
RM-200SA
Paging
)))))))))))))))))))))))))))))))) a a Te
N-8600MS
N-8000 Series IP Intercom System (8
Station Selection Chart
Applicable Exchanges/
Desk-top OT Wall-mount
Bracket
Interfaces
> Co
= WB-200RM . —
/ Salta
—— N-8610RM | jm “we,
———
a
/ Là VERT N-8640SB
N-8640DS
YC-280
N-8650DS
VE
0 oa
YC-280
o
— о N-8000EX
Lt
(eb)
=
=
N YC-290 Ш
N-8031MS N-8033MS
@ A
YC-280 a U 7 ;/ / N-8010EX
NA LJ
N-8050SB N-8031SB
Vandal-resistant type
Outdoor type
N-8000RS
2-core Shielded Type
N-8010RS
RS-460
D
=
==
D
=
= N-8400RS
<
09 N-8000 Series IP Intercom System
N-8000 System Software
Setting software
The network settings and the detection of the equipment connected to the local network can be set. The paging system settings, advanced
settings of functions for each individual equipment and settings for the whole system can also be adjusted.
[System Requirements]
OS: Windows® XP Professional SP? or later/Vista Business/7 Professional
CPU: Pentium® 4 2 GHz or faster
Memory: 1 GB or more
Required component: Microsoft® .NET Framework 3.5 SP1 or later, and
Microsoft® SQL Server 2005 Express Edition
Recording software
Telephone calls, paging, and 3-Party Conference on the N-8000 system and recording of the voice during the Scan Monitor can be managed as
a wav format. After selecting the recording subjected equipment, recording related settings can be adjusted. It is possible to easily search the
recorded audio files and also to export the audio files to an external storage.
[System Requirements]
Be eo de
Reco | Seren | OS: Windows? 7 Professional SP1(32/64bit)
D FF sédren Station rg. hara a .
. Screen resolution: Over 1024 x 768 pixels
11 LEZ 1688 VE 1 Re A
PURI м Reom В Required component: Microsoft? .NET Framework 4
HM MAIN OB Room €
M ы rase [Recommended Specifications]
“ Waissue 4 Roces E
43 puss 4 Rec F CPU: Intel® Core® i5-2400 CPU @3.10GHz or faster
Memory: 4 GB or more
Free Hard Disk Space: 100GB or more
(About 2.7 GB is used per sound source at 24-hour continuous recording)
Lyon sama KMS A A equeprentx J
po ESA bel: 5 = —
Maintenance software
This software displays the equipment name, station number, station name, etc. of individual equipment components within the system in the
form of an at-a-glance list. System check function is used to confirm equipment firmware versions, update firmware, check connections between
a PC and equipment components and between components, download various equipment log and setting files, and perform equipment clock
settings. Although the above functions can be done on the browser, use of the N-8000 Maintenance Software permits such functions to be
performed simultaneously for multiple components. Moreover, it displays the operation status of individual components in real time. Equipment
operation logs can also be automatically saved to a designated file on the PC.
Е ió ее
JUSS | [System Requirements]
| ен ен ринит
Ei En ea limb ESA —
жа ester Mi mie MA "Но Required component: Microsoft® .NET Framework 3.5 SP1 or later
me LE ES se ae СН 3 6
ma mn | на EEE Sale Screen resolution: Over 800 x 600 pixels
Fa Esp | TELISELLE HPA AA
= SCIE EE IRE LF EE IT) A ори re
wi LE CTT SELENE LE PSA i an ay
É + UE DE PRE VSN LW JI TNL INES piges _ ,
: A Le = mii am mone Cd | [Recommended Specifications]
E rer] пы нас па лай can sma [MA] OS: Windows” Vista Business/7 Professional
Ni VANE poc UI Sree vows oo Ja] CPU: Pentium® 4, 2 GHz or faster
в =" E E зар AAA + Era pis
Penser re Memory: 2 GB or more
bin FRESE DO | a |, . .
—— Cm ke | Screen resolution: Over 1024 x 768 pixels
ETE | e
= sien em
ar Cy
iam ее
i ед Al a + [=]
*Microsoft, Windows XP, Windows Vista, Windows 7 and .NET Framework are either registerd trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
*Intel, Pentium and Intel Core are either trademarks of Intel Corporation in the United States and/or other countries.
*By use of different software, it is possible to configure for a large amount of telephone calls. For more information, please contact your nearest dealer.
N-8000 Series IP Intercom System 10
Key Functions
Pag | ng Fu nction Allows the master station as well as external input equipment to initiate paging by PA
equipment or the speakers of individual stations. Operators can use the setup software to configure up to 192 paging zones
to which paging calls can be made as desired.
N-8600MS
WAN
LAN i
IP-VPN i | ‘
or
N-8000AF PA Amplifier
N-8600MS Speaker
N-8000MI
Remote Control of External System Makes it possible to execute door lock control easily through
a contact output when the master station is engaged in ongoing conversation with the N-8640DS or N-8050DS Door Station.
e N-8640DS
24
f A WAN
/ ri f——d]o“—Ñ————— LAN
zz Je Internet
7 N-8000EX or N-8010EX a —— ld
N-8000MS
N- MI
8000 Door Control
Priva су Mode Activated by a control on the RS-140 Switch Panel, blocks paging calls to connected speakers and
prevents scan monitoring except for emergency calls.
WAN y 1
LAN в ı Speaker
Internet
IP-VPN
N-8000RS or N-8010RS RS-140
N-8600MS
Direct Select Configures an operation panel equipped with indicator lamps and control buttons for the master
station. Compatible with other stations, the panel assigns the various contact input and output channels to the master station
and substations for purposes of identifying which substation is calling the programmed master station.
> De
= mme 7 <_— = > = |
- N-8000DI ds E
Pilot Panel N-8000DI only N
> =
N-8640DS
1
N
de ;
11 IP Intercom System
Scan Monitor Enables remote security monitoring by allowing the master station as well as analog telephones and
external telephones to audio monitor two or more pre-programmed stations.
N-8000MS N-8000EX
>
DZ ms WAN
= > E ——
E E on
N-8640DS
N-8000EX
N-8000MS
O Ф Фо + ё —
RS-180 N-8000RS
BGM Broadcasting Enables music from any of eight BGM sources connected to the N-8000MI to be
distributed through speakers at the master and door stations.
WAN
Internet
ee IP-VPN .
N-8000MI NX N-8000EX or N-8010EX PA Amplifier speaker
N-8600MS
N-8600MS
Audio Trigger Sets off an alarm if audio input to a pre-programmed station’s microphone fulfils pre-set conditions
(detection time or signal level). Examples include calls to the designated master station or contact output generated by
another interface unit.
x WAN
i LAN N-8600MS
a 11 CLG Ed
: IP-VPN
N-8000EX
N-8050DS
N-8050DS only x
N-8000 MI
or Revolving Light
N-8000DI
IP Intercom System 12
13
Specification
LTS
Station
a N-8600MS
Power Source
Power Consumption
Speech Method
Audio Frequency Range
External Speaker Terminal
External Control Input Terminal
No. of Connectable Expansion
Network Section
Network I/F
Network Protocol
Audio Packet
Transmission System
Voice Packet Loss Recovery
Audio Delay Time
Finish
Dimensions
Weight
Option
*0dB =1V
IP
Power Source
Power Consumption
Speech Method
Audio Frequency Range
Contact Input
Contact Output
External Speaker Terminal
Network Section
Network I/F
Network Protocol
Audio Packet
Transmission System
Voice Packet Loss Recovery
Audio Delay Time
Dust/Water Protection
Finish
Dimensions
Weight
Option
*0dB =1V
IP Intercom System
IP Multifunctional Master Station
IP Standard Master Station IP Remote Microphone Station
N-8610RM
Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))
3W (max.) Use of the AG adapter (12 V DC): 4W (microphone only),
8.5W (when connecting 4 RM-210 Extension units)
Use of the PoE (48 V DC): 5.2W (microphone only),
7.5W (when connecting 4 RM-210 Extension units)
Hands-free or handset conversation Hands-free conversation (use of goose-neck microphone)
300 Hz — 7 kHz
Maximum output 0.5W, 80, screwless connector (2P) — —
— No-voltage contact input, open voltage: 5V DC —
short-circuit current: 5mA or less, Screwless connector (2 pins)
— — Max.4 units (maximum 2 units at PoE power supply)
10BASE-T/100BASE-TX (Automatic-Negotiation)
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Unicast, Multicast
Silence insertion
80ms, 320ms (controllable on the software)
Body, Handset: ABS resin, gray
5.83" (W) x 8.19" (H) x 2.78" (D) (excluding a curl cord section)
1.7 Ib | 1.63 Ib
Wall mounting bracket: YC-280, AC adapter: AD-1215P
ABS resin, blueishgray
7.48" (W) x 3.01" (H) x 8.46" (D) (excluding microphone)
1.54 16
Remote microphone extension: RM-210
Wall mounting bracket: WB-RM200, AC adapter, AD-1215P
Door Station IP Door Station IP Door Station Board Unit
MA Es =
= me,
Sei — a
N-8640DS N-8650DS N-8640SB
Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))
SW (max.)
Hands-free conversation
300 Hz — 7 kHz
1 channel, no-voltage make contact input, open circuit voltage: 5V DC, short circuit current: 10mA or less, unterminated ends
Open collector output, 4 channels, withstand voltage: 30V DC, control current, Max. 50mA (4 output 1COMMON), unterminated ends
Relay contact output, 1 channel, withstand voltage; 30V DC. control current: Max. 500mA, unterminated ends
0.5W, 8Q
10BASE-T/100BASE-TX (Automatic-Negotiation)
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Unicast, Multicast
Silence insertion
80ms, 320ms (controllable on the software)
IP65 (Note that panel edges must be sealed at installation.) — —
Panel: Stainless steel, hairline/ Call button: Metal ABS resin, dark gray —
4.53" (W) x 6.38" (H) x 2.3" (D) 4.61" (W) x 6.38" (H) x 2.36" (D) 3.11" (W) x 5.28" (H) x 2.09" (D)
1.72 1b 0.88 Ib 0.77 1b
For flush-mount: 3-gang electrical box or Back Box YC-150, Wall surface-mount: Wall AC adapter: AD-1215P
mount Box YS-13A, AC adapter: AD-1215P
2-Wire
Type
Station
Power Source
Power Consumption
Wiring Method
Speech Method
Audio Frequency Range
Transmission Range
Dial-in Contact Output
External Speaker Terminal
Dust/Water Protection
Resistance to Environment
Finish
Dimensions
Weight
Options
*0dB = 1V
Standard
Master Station
Multifunctional
Master Station
N-8000MS N-8010MS
Standard
Hands-Free
Master Station
N-8011MS
Industrial-Use
Master Station
N-8020MS
48V DC (supplied from the IP network intercom exchange)
Hands-free or handset conversation
2.4W (max.)
1 set of twisted pair cable
Hands-free conversation
300 — 7,000Hz
| Hands-free or handset conversation
Max. 1500m (20.65mm. Loop resistance 1700)
0.6W, 80), screwless connector (2P)
Body, Handset: ABS resin, gray
5.83" (W) x 8.19" (H) x 2.78" (D)
(excluding a curl cord section)
1.76 lb 1.54 Ib
Wall mounting bracket: YC-280
Flush-Mount Flush-Mount
Master Station Hands-Free
Master Station
TRE
ma
il
N-8031MS
N-8033MS
Body: ABS resin, gray
3.62"(W) x 7.68"(H) x 2.21(D)
0.44 Ib
Wall mounting bracket: Y C:290
Master Station
Board
N-8031SB
Open collector output
(The contacts have polarity.)/
Withstand voltage: Max. 30V DC,
Control current: Max. 50mA,
screwless connector (2P)
0.6W, 80), screwless connector (2P)
IP54
Body, Handset: ABS resin, gray
6.69" (W) x 8.66" (H) x 3.85" (D)
Heavy Industrial Station
N-8065MS Q-TEE
Hands-free conversation
0.5W, 80), screwless connector
IP65
Vandal-, fire- and shock-proof
Body: Aluminum, orange
6.3" (W) x 14.17" (H) x 3.58" (D)
(excludinga curl cord section) (without cable glands)
2.20 Ib 8.27 Ib
Wall mounting bracket: YC-280 —
Door Station Door Station
Board
de
N-8050DS
N-8050SB
Power Source 48V DC (supplied from the IP network intercom exchange)
Power Consumption 2.4W (max.)
Wiring Method 1 set of twisted pair cable
Speech Method Hands-free or handset conversation
Audio Frequency Range
Transmission Range
Contact Output
300 — 7,000Hz
Max. 1500m (20.65mm. Loop resistance 1700)
Open collector output, withstand voltage: Max. 30V DC,
control current: Max. 50mA, one shot: can be set from1 to 9 sec,
screw terminal (polarized)
External Dial Input No-voltage make contact input, open voltage: 5V DC, short-circuit current: 1mA, screwless connector (5 pins)
Housing Protection
Dust/Water Protection
Resistance to Environment
Finish
Dimensions
Weight
Options
*0dB = 1V
IP65 (Note that panel edges
must be sealed at installation.)
Chemical Resistant
Membrane switch (Front pasting): | Panel: Stainless steel (SUS304),
Polyester film hairline
4.53" (W) x 10.0" (H) x 2.15" (D)
1.87 Ib
Flush-mount: Back Box, YC-241
Wall surface-mount:
Wall mount Box Y C-251
Back Box YC-841
Handset: RS-191
2.76"(W) x 7.28"(H) x 0.81"(D)
0.45 Ib (including accessories)
Handset: RS-191
BS EN62262: 2002: 1K02 equivalent
IP54 (Note that panel edges
must be sealed at installation.)
Panel: Stainless steel,
hairline/ Call button: Metal
4.53" (W) x 6.38" (H) x 2.13" (D)
1.50 Ib
Flush-mount: 3-gang electrical
box or Back Box YC-150
Wall surface-mount: Wall mount Box YS-13A
2.64"(W) x 5.05"(H) x 1.02"(D)
0.22 Ib (including accessories)
IP Intercom System 14
15
Specification
IP
Network
Exchange
Power Source (CE): 220 — 240V AC, 50/60Hz/ (CU): 120V AC, 50/60Hz
Power Consumption 50W (at rated), 75W (max.)
Interface Section or Station
Speech Link Internal: 4/External: 8 | Internal: 1/External: 2
Line Capacity Up to 16 stations
Wiring Method 1 set of twisted pair cables
Transmission Range Max. 1500m (20.65mm. Loop resistance 1700)
Paging Output Audio: 2 channels Max. 0dB*, 6000, balanced, detachable terminal block Station paging only
Control: 2 channels, no-voltage make contact output (24V DC/0.5A),
removable terminal block
Network Section
Network I/F 10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet
Transmission System Unicast, Multicast
Audio Packet Omission Silence insertion
Audio Delay Time 80ms, 320ms (Controllable on the software)
Finish Pre-coated steel plate, black, 30% gloss
Dimensions 16.54" (W) x 1.74" (H) x 14.02" (D)
Weight 9.04 lb 9.26 Ib
*0dB=1V
Interface
Unit
Power Source
Power Consumption
Audio Input
Audio Output
Contact Input
Contact Output
Network Section
Network I/F
Network Protocol
Audio Packet
Transmission System
Voice Packet Loss Recovery
Audio Delay Time
Finish
Dimensions
Weight
Options
IP Network Intercom Exchanges
Multi Interface Unit
N-8000MI
(CE): 24W (230mA) (max.)/(CU): 21W (330mA) (max.)
Input: 2 inputs (2P/input), Max. 0dB*, under 6000, balanced,
with a semi-fixed volume for adjustment (0 to —25dB)
Control: 2 inputs (2P/input), no-voltage make contact input,
open voltage: 12V DC, short-circuit current: 10mA
Removable terminal block (8 pins)
Output: 2 outputs (2P/output), Max. 0dB*,
under 6000, balanced
Control: 2 outputs (2P/output), relay contact output,
contact capacity: 24V DC/0.5A
Removable terminal block (8 pins)
16 inputs, no-voltage make contact input, open voltage;
12V DC, short-circuit current: 10mA, removable terminal
block (18 pins)
(1 common terminal for 4 inputs)
16 outputs, relay contact output, contact capacity: 24V DC/
0.5A, removable terminal block (18 pins)
Silence insertion
80ms, 320ms (Controllable on the software)
16.54" (W) x 1.74" (H) x 9.43" (D)
6.17 Ib
*0dB =1V
IP Intercom System
Direct Select Unit
N-8000DI
(CE): 220 — 240V AC, 50/60Hz/ (CU): 120V AC, 50/60Hz
16W (Max)
32 inputs, no-voltage make contact input, open voltage:
24V DC, short-circuit current: 5mA or less,
removable terminal block (20 pins),
32 outputs, relay contact output, contact capacity: 24V DC/
2 — 500mA, removable terminal block (32 pins)
10BASE-T/100BASE-TX (Automatic-Negotiation)
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Unicast, Multicast
Pre-coated steel plate, black, 30% gloss
16.54" (W) x 1.74" (H) x 10.51" (D)
6.17 lb
Wall mounting bracket: YC-850
Audio Interface Unit
N-8000AF
7W (Max.)
1 input (transformer isolated), -58dB* to OdB*, 2kQ, balanced
(MIC/LINE input, controllable on the software)
with input volume control knob, removable terminal block
(3 pins)
1 output (transformer isolated), 0dB*, 6000, balanced,
removable terminal block (3 pins)
8 inputs, no-voltage make contact input, open voltage:
24V DC, short-circuit current: 5mA or less, removable
terminal block (10 pins), (1 common terminal for 4 inputs)
8 outputs, relay contact output, output capacity: 24V DC/
2 — 500mA, removable terminal block (16 pins)
Silence insertion
80ms, 320ms (Controllable on the software)
8.27" (W) x 1.74" (H) x 10.51" (D)
3.75 Ib
Rack mounting bracket: MB-15B-BK, MB-15B-J
Wall mounting bracket: YC-850
Telephone Interface Unit C/O Interface Unit
Interface
Unit
| N-8000AL | N-8000CO
Power Source (СЕ): 220 — 240V AC, 50/60Hz/ (CU): 120V AC, 50/60Hz
Power Consumption 8W (Max.) | 7W (Max)
Line: Public Switched telephone networks
Number of Lines 1 line
Selective Signal Type DTMF Signal
Signal System — Compatible with loop start signaling
Monitor Function Line Loop detection —
Control Function Caller ID function —
Wiring Method 1 pair of twisted pair cable
Network Section
Network I/F 10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission System Unicast, Multicast
Finish Pre-coated steel plate, black, 30% gloss
Dimensions 8.27" (W) x 1.74" (H) x 10.51" (D)
Weight 3.75 lb
Options Rack mounting bracket: MB-15B-BK, MB-15B-J
Wall mounting bracket: YC-850
*0dB=1V
IP IP Interface Module
Interface
LUTTE
Network Section
Network I/F 10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Connector RJ45 connector
Voice sampling frequency 16 kHz, 8 kHz (controllable on the software)
48 kHz, sample rate is used for SX-2000 system only
Quantifying bit number 16-bit
Voice encoding method Sub-band ADPCM, Cryptosystem
Voice Packet Loss Recovery Silence insertion
Audio Delay Time 80ms, 320ms (Controllable on the software)
Indicator Operation indicator (RUN)
Finish Pre-coated steel plate, black, 30% gloss
Dimensions 1.38" (W) x 4.7" (H) x 7.02" (D)
Weight 0.33 Ib
IP Intercom System 16
Specification
Sub-station Interface Unit
2-Gore
Shielded
CRT
a N-8000RS N-8010RS
Power Source (CE): 220 — 240V AC, 50/60Hz/CU): 120V AC, 50/60Hz
Power Consumption (CE): 40W(at rated), 50W(max.)/(CU): 35W(at rated), 45W(max.) | (CE): 32W (at rated), 38W (max.)/(CU): 26W (at rated), 32W (max.)
Interface Section for Sub-station
Number of Lines 16 lines
Number of Speech Link 2 links | 1 link
Transmission Range 547yd/AWG24, 875yd/AWG22, 1422yd/AWG19
Wiring Method Two-core shielded cable
Network Section
Network I/F 10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission System Unicast, Multcast
Voice Packet Loss Recovery Silence insertion
Audio Delay Time 80ms, 320ms (Controllable on the software)
Finish Pre-coated steel plate, black, 30% gloss
Dimensions 16.54" (W) x 1.74" (H) x 12.81" (D)
Weight 8.6 Ib 8.38 Ib
Options Wall mounting bracket: YC-850
Sub-station Sub-station
(Emergency Use)
RS-180
Control Output Open collector output: 24V DC, 30mA
(The open collector output is kept turned on till
the conversation is finished after the call button
was pressed.)
Finish Panel: Stainless steel (SUS304), hairline
Call Button: Metal, red
Printed Circuit Board: Weather-resistant coating
Dimensions 4.72" (W) x 4.72" (H) x 2.30" (D)
Weight 1.26 Ib
Options 2-gang electrical box: Y C-302,
Indoor wall-mount box: Y C-822,
Outdor wall-mount box: YC-823
IP Intercom
Switch Panel
IP Intercom
Switch Panel
RS-141 RS-141
Momentary
Call-in Switch Momentary (EMERGENCY, NORMAL)
Privacy Switch —
Wiring Two-core shielded cable
Finish Panel: Stainless steel, hairline Panel: Stainless steel, hairline
Call-in Switch: Resin, red Call-in Switch: Resin, red
Privacy Switch (normal): Resin, white
Dimensions 2.76" (W) x 4.53" (H) x 1.13" (D)
Weight 0.18 Ib
Options Handset: RS-141
17
IP Intercom System
(Outdoor Vandal-Resistant Type)
RS-170
2-gang electrical box: YC-302,
Indoor wall-mount box; YC-822,
Outdor wall-mount box: YC-823
Sub-station
(Indoor Type)
Sub-station
(Indoor Vandal-Resistant Type)
Panel: Stainless steel (SUS304), hairline
Call Button: Resin, black
Panel: Stainless steel (SUS304), hairline
Call Button: Metal
4,72" (W) x 4.72" (H) x 1.91" (D)
0.90 Ib
2-gang electrical box: Y C-302, Indoor wall-mount box: Y C-822
4.72" (W) x 4.72" (H) x 2.26" (D)
1.19 Ib
IP Intercom
Switch Board
Switch Panel
RS-141
Call Switch Wiring
Wiring
Weight
4 cables (for 2 momentary switches)
Two-core shielded cable
0.07 Ib
| Latching
Panel: Stainless steel, hairline
Call-in Switch: Resin, red
Privacy Switch (normal): Resin, white
Sub-station Interface Unit
N-8400RS
Analog Standard
Master Station
N-8410MS
Power Source (CE): 220 — 240V AC, 50/60Hz/(CU): 120V AC, 50/60Hz Power Source 24V DC (supplied from the sub station interface unit N-8400RS)
Power Consumption (CE): 35W (at rated), 50W(max.)/(CU): 30W(at rated), 45W(max.) Current Consumption Max. 30mA
Interface Section for Sub-station Wiring Method 2 set of twisted pair cable
Number of Lines 16 lines Speech Method Hands-free or handset conversation
Number of Speech Link 2 links Audio Frequency Range 300 — 7,000Hz
Transmission Range 1093yd/AWG24, 1640yd/AWG22, 2187yd/AWG19 Transmission Range 1093yd/AWG24, 1640yd/AWG22, 2187yd/AWG19
Wiring Method 2 sets of twisted pair cables Finish Body, Handset: ABS resin, gray
Network Section Dimensions 5.83" (W) x 8.19" (H) x 2.78" (D) (excluding a curl cord section)
Network I/F 10BASE-T/100BASE-TX (Automatic-Negotiation) Weight 1.59 Ib
Network Protocol TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP Option Wall mounting bracket: YC-280
Audio Packet *0dB = 1V
Transmission System Unicast, Multcast
Voice Packet Loss Recovery Silence insertion
Audio Delay Time 80ms, 320ms (Controllable on the software)
Finish Pre-coated steel plate, black, 30% gloss
Dimensions 16.54" (W) x 1.74" (H) x 12.81" (D)
Weight 8.82 Ib
Option Wall mounting bracket: YC-850
Sub-station Sub-station Sub-station Sub-station
(Emergency Use) | № (Outdoor Vandal-Resistant Type) (Indoor Vandal-Resistant Type) (Indoor Type)
в © “_Q “ e > e
e e e -
Le“ RSs cn Sm ола? оао ón
| В$-480 | RS470 | RS-460 | RS-450
Call-in Switch
Control Output
Wiring
Dust/Water Protection
Finish
Dimensions
Weight
Options
Open collector output: 30V DC, 30mA
Panel: Stainless steel, hairline
Call Switch: Metal, red
Circuit board:
Weather-resistant coating
4.72" (W) x 4.72" (H) x 1.99" (D)
1.27 16
2-gang electrical box:
YC-302, Handset: RS-481
Indoor wall-mount box: YC-822,
Outdor wall-mount box: YC-823
IP Intercom Switch Board
Call Switch Wiring
Wiring
Weight
6 cables (for 3 momentary switches)
Twisted pair cables (2-pair)
0.31 lb
Momentary (Emergency call: Press twice within 400 ms)
IP54
Twisted pair cables (2-pair)
Panel: Stainless steel, hairline
Call Switch: Metal, silver
Panel: Stainless steel, hairline
Call Switch: Resin, black
4.72" (W) x 4.72" (H) x 1.95" (D) 4.72" (W) x 4.72" (H) x 1.63" (D)
1.21 1b
2-gang electrical box: YC-302,
Indoor wall-mount box: Y C-822,
Outdor wall-mount box: YC-823
1.19 lb 1.12 16
2-gang electrical box: Y C-302, Indoor wall-mount box: Y C-822
IP Intercom System 18
YC-850 wall-Mount Bracket
Designed to mount N-8000RS, N-8010RS,
N-8400RS, N-8000DI, N-8000AF, N-8000AL
and N-8000CO on a wall.
Finish: Surface-treated steel plate, black, 30% gloss
Dimensions: 1.78" (W) x 0.39" (H) x 8.66" (D)
Y C-290 wail-Mount Bracket
Designed to mount N-8011MS on a wall.
Finish: Surface-treated steel plate, gray, paint
Dimensions: 2.52" (W) x 5.18" (H) x 1.25" (D)
YC-241 Flush-Mount Back Box
Designed to surface-mount N-8031MS in a wall.
Finish: Colored chrome painting
Dimensions: 10.87" (W) x 4.69" (H) x 2.64" (D)
YC-841 Back Box
Designed to flush-mount N-8033MS on a wall.
Finish: Surface-treated steel plate, white
Dimensions: 4.69" (W) x 10.16" (H) x 2.24" (D)
YC-822 indoor Wall-Mount Box
Designed to mount RS-150, RS-160, RS-170,
RS-180, RS-450, RS-460, RS-470 and RS-480
on a wall.
Finish: Surface-treated steel plate, white
Dimensions: 4.88" (W) x 4.88" (H) x 2.4" (D)
YC-823 outdoor Wall-Mount Box
Designed to mount RS-170, RS-180, RS-470
and RS-480 on a wall.
Finish: Stainless plate, off-white
Dimensions: 4.88" (W) x 4.88" (H) x 2.44" (D)
YC-280 Wall-Mount Bracket
Designed to mount N-8000MS, N-8010MS,
N-8020MS, N-8410MS, N-8510MS and
N-8600MS on a wall.
Finish: Surface-treated steel plate, gray, paint
Dimensions: 3.94" (W) x 5.51" (H) x 1.25" (D)
YC-251 surface-Mount Back Box
Designed to mount N-8031MS on a wall.
Finish: Surface-treated steel plate, white
Dimensions: 4.88" (W) x 10.18" (H) x 1.99" (D)
YC-150 Flush-Mount Back Box
Designed to flush-mount N-8050DS and
N-8640DS in a wall.
Finish: Zinc-plating
Dimensions: 7.24" (W) x 4.69" (H) x 2.24" (D)
Y S-13A surface-Mount Back Box
Designed to surface-mount N-8050DS and
N-8640DS in a wall.
Finish: Zinc-plating
Dimensions: 6.44" (W) x 4.51" (H) x 2.17" (D)
YC-302 2-Gang Electrical Box
Designed to mount RS-150, RS-160, RS-170,
RS-180, RS-450, RS-460, RS-470 and RS-480
in a wall.
Finish: SPHT, MFZn4 (glazed chromate)
Dimensions:
Outlet box: 4.02" (W) x 4.02" (H) x 1.73" (D)
Cover: 4.17" (W) x 4.17" (H) x 0.51" (D)
AD-1215P ac Adapter
The AD-1215P is an AC adapter to
operate the IP Station on AC.
TOA Corporation
www.toa.jp
Specifications are subject to change without notice.
(1404) 833-61-100-03-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement