INSTALLATION MANUAL MB-AV20RM CONTENTS • 2 Rack Ear Brackets • 1 U-shaped Center Spacer Bracket (This is the smaller U-bracket.) • 1 U-shaped Filler Bracket (for use when only mounting one AV-20D or AV-60S-AM, and that can be used on either the left or right side) (This is the larger U-bracket.) • 16 Screws that mount the two units, or one unit and the Filler Bracket, to the Rack Ears and the Center Spacer Bracket, o A short handled Phillips screwdriver will be required to assemble the screws on the inside of the Center Spacer. Note: The screws used to hold the AV-20D or AV-60S-AM cover in place must first be removed before installing the MB-AV20RM. INSTALLATION Mounting a Single Unit (this is the same whether mounting an amplifier on the left or right side): Mounting Two Units: TOA Electronics, Inc.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project