TOA BS-1030W Quick start guide

TOA BS-1030W Quick start guide
BS-1030 Series
Universal Speaker
Multi-use High Performance Speaker Designed to Fit Any Atmosphere
Note: Mounting hardware shown here are not TOA standard brackets.
● Clean, modern design
Featuring an elegant enclosure formed of gentle curving
lines, the BS-1030's aesthetically pleasing design will
suit virtually any installation's requirements. The virtually
appealing BS-1030 is available in white (BS-1030W) or black
(BS-1030B) enclosures.
● Expanded installation options
The compact and versatile BS-1030 lends itself to many
different apprecations as it is versatile enough to be installed
virtually anywhere. Simple installations can be effected by
mounting the speaker directly to a wall either vertically or
horizontally using appropriate surface-to-mount screws.
If the speaker needs to be adjusted, a supplied mounting
bracket that allows considerable setting adjustment may be
used. For more demanding situations, the speaker may be
used in single or multiple unit configurations as requirements
dictate. In keeping with its multi purpose sensibility, this
speaker features a splash-proof construction allowing it to be
employed to the elements. For additional placement options,
the free-standing speaker stand may be utilized as desired.
The BS-1030 is truly a universal speaker that suits any
application anywhere at an attractive price point.
● Solid performance
The BS-1030 is a 2-way bass reflex speaker featuring a
frequency response that has been carefully tailored to deliver
good audio quality to suit general use such as speech and
music. Even with its compact dimensions, the BS-1030
distinguishes itself with a wide frequency response from 80Hz
up to 20,000Hz to capably handle most audio applications.
● Simple switchover control for high or low impedance use
The BS-1030 has a nominal impedance of eight ohms and
may be used in both high or low impedance applications. Rear
panel-mounted rotary switches allow quick adjustments in five
increments for respectively selecting low or high impedance
70V / 100V use.
SPECIFICATIONS
Model
BS-1030B
Enclosure
2-way bass-reflex type
Rated Input
30W
Rated Impedance
8Ω
100V line: 330Ω(30W), 500Ω(20W), 670Ω(15W), 1kΩ(19W), 2kΩ(5W)
70V line: 170Ω(30W), 250Ω(20W), 330Ω(15W), 500Ω(19W), 1kΩ(5W)
Sound Pressure Level
Frequency Response
Speaker Component
Speaker Cord
Operation Temperature
Water Protection
BS-1030W
90 dB (1W, 1m)
80 Hz - 20k Hz
12 cm dynamic speaker + 2.5 cm dome tweeter
2-core cabtyre cord with diameter of 6 mm
- 10 ℃ to + 50 ℃
IP X4 (can be installed vertically or horizontally. *)
Case: ABS resin, black, paint
Grille: Pre-coated steel plate, black, paint
Bracket: Pre-coated steel plate, black, paint
Finish
Case: ABS resin, white, paint
Grille: Pre-coated steel plate, white, paint
Bracket: Pre-coated steel plate, white, paint
Dimensions
Weight
196 (W) × 290 (H), 150 (D) mm (unit only)
2.5 kg (unit only)
Accessory
Bracket…1, Bracket mounting screw…2, Bracket mounting washer…2
Option
Mounting bracket: SP-420 (color: white only)
Applicable bracket: SP-410
Applicable Stand: ST-16A
Mounting bracket: SP-420
Applicable bracket: SP-410
Applicable Stand: ST-16A
* Install with the front downward. Note that the splash-proof capability will be lost if installed face-up. The logo mark needs to be located in the lower section when the speaker is installed
vertically, and on the right side of the speaker (as viewed from the front) when installed horizontally.
INSTALLATION EXAMPLES
▶ SP-420
In-Wall/ Ceiling
Mounting
Bracket
▶ Direct
▶ ST-16A
Speaker Stand
▼ With Supplement Bracket
▶ SP-410
Wall/ Ceiling
Mounting
Bracket
企業価値ロゴ(標準版)
No.1
No.4
No.2
No.3
No.10
www.toa.jp
Specifications are subject to change without notice.(201805) 833-61-642-1B
No.5
No.6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement