TOA | C-A854H | Specification Sheet | TOA C-A854H Specification

TOA C-A854H Specification
C-CV854D-3
Vandal Resistant Day/Night Camera
3X varifocal lens included
Bottom view without dome cover
(Heater unit attached)
DESCRIPTION
The C-CV854D-3 is a high-resolution, indoor/outdoor use vandal-resistant 24V AC/12V DC type surveillance camera capable of
both day and night coverage. It operates as a color camera in daylight, and as a highly sensitive monochrome camera in
darkness. This selectable automatic dual operating capability makes it ideal for applications where around the clock coverage is
essential. Thanks to a noise-reduction function, clear images can be viewed, even under poor lighting conditions. The
C-CV854D-3 incorporates a 3-axis (horizontal, vertical and rotational) adjustment mechanism and a 3X varifocal lens, which
facilitate adjustment of the camera's orientation and view angle during installation. The unit's dustproof and waterproof
construction enables it to be mounted to an outdoor wall or ceiling without requiring any extra equipment to protect the camera
against dust or rain. In addition, by installing the TOA C-A854H heater unit inside the camera housing, the camera may be used
at ambient temperatures as low as minus 30 degrees centigrade. The camera body is made of die-cast aluminum alloy, with a
polycarbonate dome cover, ensuring a high degree of resistance to even strong impacts with an energy of 50 Joules.
FEATURES
■ High resolution (horizontal: 500 lines)
• 1/3" CCD with a resolution of 380,000 pixels (NTSC)
(PAL: 440,000 pixels)
■ High sensitivity
• 0.5lx in color mode and 0.05lx in B/W mode, with
electronic sensitivity boost of up to 4X
■ Day/Night operation
• Clear monochrome image is provided even under poor
lighting conditions.
■ Backlight compensation
• Allows optimal viewing of dark areas in a backlight
condition.
■ Easy viewing
• Flicker-free function
• Noise reduction function
■ Dust- and water-proof construction (IP66)
■ Tamper-proof, sturdy design
• Impact-resistance against 50-joule energy
■ Wide range of view angles (3X varifocal lens)
• Horizontal: 90.3° – 31.9°, Vertical: 66.4° – 23.9°,
Diagonal: 115.4° – 39.8°
■ Easy installation
• 3-axis (horizontal, vertical and rotational) adjustment
mechanism
• Direct output to the monitor
■ Easy focusing without requiring an ND filter*
*see rear page for more feature information.
■ Flexible camera power source
• Compatible with 24V AC or 12V DC
■ Operating temperature of as low as –30°C (-22°F)
• With optional heater unit C-A854H
NTSC/PAL
APPEARANCE AND DIMENSIONAL DIAGRAM
46 (1.81")
83.5
(3,29")
Camera angle setting range
4–4.2 X 5.7
Camera power
BNC–R jack
Heater power
66° – 24°
(WIDE)
Front view without cover
Camera
mounting
hole
(4 points)
White Balance mode
Focal Length
Maximum Aperture Ratio
Iris
Angle of View
Adjustment Switch
Day/Night Mode
Other Function
Dust/Water Protection
Operating Temperature
Operating Humidity
Application
Finish
Dimensions
Weight
Accessory
Option
For camera: 24V AC, 50/60Hz or 12V DC, for heater: 24V AC, 50/60Hz
4W (300 mA, maximum current 800 mA)
1/3 type IT-CCD
768 (H) × 494 (V) (380,000 pixels)
2:1 interlace
Horizontal: 15.734kHz, Vertical: 59.94Hz
VBS 1.0V (p-p) 75Ω, RCA pin jack
VBS 1.0V (p-p) 75Ω, BNC-R jack
Internal synchronization
Horizontal: 500 lines (at center), Vertical: 350 lines (at center)
50dB
0.5 lx (50 IRE, color operation), 0.1 lx (20 IRE, color operation)
0.05 lx (50 IRE, black-and-white operation, incandescent lamp)
ATW/AWB (switch selector)
f = 3.0 – 9.0mm
1:1.4 – 2.4
Auto-iris
Horizontal: 90.3° – 31.9°. Vertical: 66.4° – 23.9°, Diagonal: 115.4° – 39.8°
ON/OFF (used for focus adjustment)
Automatic/Off (switch selector)
Backlight compensation, Shutter speed, Iris control,
Max. 4X sensitivity increase (auto), Noise reduction
IP66
–10˚C to +50˚C(14°F to 12°F)
(When an optional heater unit is attached: –30°C to +50°C(-22°F to 122°F))
Under 90% RH (no dew condensation)
Outdoor/Indoor use
Case, bezel: Die-cast aluminum, light gray, paint
Dome cover: PC resin (transparent)
ø154.2 × 110 (H)mm (ø6.07" x 4.33") (excluding the cables)
1.1kg (2.43lb)
L-type wrench x 1, Base gasket x1
Heater unit: C-A854H
Flush mounting bracket: C-BC850U
Wall mounting bracket: C-BC850W
Pole mounting bracket: C-BC450PM
(
SPECIFICATIONS (NTSC)
Power Requirement
Power Consumption
Image Device
Number of Effective Pixels
Scanning System
Scanning Frequency
Monitor Output
Video Output
Synchronizing System
Resolution
S/N Ratio
Minimum Illumination
°
3TE2LE)
Unit: mm
(W
Pipe screw cover
Note: When installing the camera outdoors,
the 4 camera mounting holes must
be protected to prevent rainwater
from leaking into the enclosure.
°–
90IDE)
Bottom view without cover
32
°
(Rotaring angle to horizontal direction)
Front
(TE
LE
)
Bottom View
(TELE)
Angle of View
(vertical direction)
90
°–
110 (4.33")
ø154.2 (ø6.07")
Front View
(Rotaring angle to vertical direction)
Ceiling
(W
ID
E)
Top View
Angle of View
(horizontal direction)
SPECIFICATIONS (PAL)
Power Requirement
Power Consumption
Image Device
Number of Effective Pixels
Scanning System
Scanning Frequency
Monitor Output
Video Output
Synchronizing System
Resolution
S/N Ratio
Minimum Illumination
White Balance mode
Focal Length
Maximum Aperture Ratio
Iris
Angle of View
Adjustment Switch
Day/Night Mode
Other Function
Dust/Water Protection
Operating Temperature
Operating Humidity
Application
Finish
Dimensions
Weight
Accessory
Option
For camera: 24V AC, 50/60Hz or 12V DC, for heater: 24V AC, 50/60Hz
4W (300 mA, maximum current 800 mA)
1/3 type IT-CCD
752 (H) × 582 (V) (440,000 pixels)
2:1 interlace
Horizontal: 15.625kHz, Vertical: 50Hz
VBS 1.0V (p-p) 75Ω, RCA pin jack
VBS 1.0V (p-p) 75Ω, BNC-R jack
Internal synchronization
Horizontal: 500 lines (at center), Vertical: 410 lines (at center)
50dB
0.5 lx (350mV, color operation), 0.1 lx (140mV, color operation)
0.05 lx (350mV, black-and-white operation, incandescent lamp)
ATW/AWB (switch selector)
f = 3.0 – 9.0mm
1:1.4 – 2.4
Auto-iris
Horizontal: 90.3° – 31.9°. Vertical: 66.4° – 23.9°, Diagonal: 115.4° – 39.8°
ON/OFF (used for focus adjustment)
Automatic/Off (switch selector)
Backlight compensation, Shutter speed, Iris control,
Max. 4X sensitivity increase (auto), Noise reduction
IP66
–10˚C to +50˚C(14°F to 12°F)
(When an optional heater unit is attached: –30°C to +50°C(-22°F to 122°F))
Under 90% RH (no dew condensation)
Outdoor/Indoor use
Case, bezel: Die-cast aluminum, light gray, paint
Dome cover: PC resin (transparent)
ø154.2 × 110 (H)mm (ø6.07" x 4.33") (excluding the cables)
1.1kg (2.43lb)
L-type wrench x 1, Base gasket x1
Heater unit: C-A854H
Flush mounting bracket: C-BC850U
Wall mounting bracket: C-BC850W
Pole mounting bracket: C-BC450PM
NOMENCLATURE
2
Side view with dome cover
Side view without inner cover
1
3
4
5
6
8
7
Bottom view with dome cover
Bottom view without inner cover
9
10
LOCK
11
12
(1) Camera power input cable
(Red, Black)
(24V AC or 12 V DC)
(2) Heater power input cable
(White, White)
(24V AC)
(3) Video output terminal
(cable with BNC)
(4) Safety wire fixing hole (M4)
(5) Zoom ring-fixing screw
(6) Zoom ring
(7) Focus ring fixing screw
(8) Focus ring
(9) Mode setting switch
(10) Iris control
(11) Monitor output terminal
(RCA pin jack)
(12) Varifocal lens
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
GENERAL REQUIREMENTS
The product specified shall be a surface-mounted, vandal
proof, IP66 rated, 24V AC or 12V DC type color dome camera
system designed for indoor/outdoor surveillance applications.
The camera system shall consist of a high resolution CCD
camera (NTSC: 380,000 pixels/PAL: 440,000 pixels) using 1/3”
type CCD image device with an auto-iris 3X varifocal lens with
3.0 – 9.0 mm focal length, 90.3° – 31.9° horizontal range, 66.4°
– 23.9° vertical range and 115.4° – 39.8° diagonal range. The
specified camera’s body shall be made of die-cast aluminum
alloy, with a polycarbonate dome cover to withstand impact
within 50-joule energy.
The specified camera shall operate as a color camera in
daylight, and as a highly sensitive monochrome camera in
darkness, and automatically boost electronic sensitivity up to
4X according to the objects’ illumination.
The camera shall have a noise reduction function to ensure
clear images even under poor lighting conditions and a function
to reduce monitor image flicker caused by fluorescent lighting.
The specified product shall offer a backlight compensation
function which allows optimal viewing of dark areas in a
backlight condition, and focus adjustment switch which allow
the installer to easily perform focus adjustment without using an
ND (Neutral Density) filter.
Monitor output shall provide a convenient monitor connection
for installer to align the camera.
The manufacturer of the specified dome cameras shall provide
optional heater unit which extends the operating temperature
range to –30°C.
The optional mounting brackets shall allow the camera to be
mounted in a ceiling and wall and on a pole.
CAMERA SPECIFICATIONS
Resolution:
Horizontal: 500 lines (at center),
vertical: 410 lines(at center)
Scanning System:
2:1 interlace
Scanning Frequency: Horizontal: 15.625 kHz,
vertical: 50 Hz
S/N Ratio:
50 dB
Minimum Illumination: 0.5 lx (50 IRE, color operation),
0.1 lx (20 IRE, color operation),
0.05 lx (50 IRE, black-and-white
operation, incandescent lamp)
LENS SPECIFICATIONS
Focal Length:
f=3.0-9.0 mm
Maximum Aperture Ratio:1 :1.4-2.4
ELECTRICAL SPECIFICATIONS
Power Requirement:
24V AC, 50/60Hz or 12V DC/
Optional heater unit: 24V AC, 50/60Hz
Power Consumption:
4W (300mA, maximum current: 800 mA)
Video Output:
VBS 1.0V (p-p) 75 ohms, BNC-R jack
Monitor Output:
VBS 1.0V (p-p) 75 ohms, RCA pin jack
MECHANICAL SPECIFICATIONS
Dimensions:
ø154.2 × 110(H) mm (6.07" × 4.33")
(excluding the cables)
Weight:
1.1 kg (2.43 lb)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: -10°C to +50°C (14°F to 122°F)
Operating Humidity:
Under 90%RH (no condensation)
C-BC850W
35 (1.38")
Heater Unit
Wall Mounting Bracket
300 (11.81") or more
C-A854H
103 (4.06")
29 (1.14")
Top View
C-CV854D-3
(option)
Wall mounting example
Front View
46 (1.81")
Side View
220 (8.66")
135 (5.31")
6 (0.24")
Unit: mm
Installing this Heater Unit in C-CV854D-3 allows the camera to be used in
location exposed to extremely low ambient temperature.
SPECIFICATIONS
Designed to mount C-CV854D-3 to a wall.
Can mount the camera on pole with optional C-BC450PM and YS-60B.
SPECIFICATIONS
Cover: PC resin, light gray/Bracket: Stainless steel
170 (W) × 115 (H) × 220 (D)mm (6.69" × 4.53" × 8.66")
1.1kg (2.43 lb)
Joint base × 1, Base mounting screw (M4×16, with washer) × 4
Camera mounting screw (M4×12) × 4
C-CV854D-3
Applicable Camera
Pole Mounting
Bracket
72 (2.83")
A
62
(2.44")
C-BC450PM
Flush Mounting
Bracket
Top View
22
(0.87")
ø98
(3.86")
58.6
(2.31")
156 (6.14")
46
(1.81")
4–M4
Cross sectional view when
mounted in the ceiling
C-BC850W
(option)
Side View
Rear View
ø90–ø340
(ø3.54"–ø13.39")
Unit: mm
YS-60B (option)
Pole
Unit: mm
YS-60B
Mounting Band
Ceiling board
C-CV854D-3
(option)
69.3
(2.73")
22 (0.87")
25 (0.98") or less
Decorative panel
83.5 (3.29")
150 (5.91")
ø50
(ø1.97")
C-BC450PM
Ceiling
board
30 (1.18")
Figure as viewed from point A
Front View 4–ø11 (ø0.43")
Decorative panel
ø200 (ø7.87")
ø8 (ø0.31")
10 (0.39")
16×25
(0.63×0.98")
4–M4
Ceiling clamping plate
17 (0.67")
Finish
Dimensions
Weight
Accessory
C-BC850U
ø227
(8.94")
Unit: mm
15 (0.59")
Weight
Accessory
Applicable Camera
24V AC, 50/60Hz
15W (630mA)
Turns on at under approx. 10˚C (50˚F)
–30˚C to +50˚C (-22˚F to +122˚F)
103 (W) × 35 (H) × 29 (D)mm (4.06" × 1.38" × 1.14")
(excluding connector and thermostat)
35g (0.08 lb)
Mounting screw × 3
C-CV854D-3
9.5 (0.37")
Grommet
Bottom View
2 (0.08")
Power Req.
Power Consumption
Heater Operating Temperature
Operating Temperature
Dimensions
170 (6.69")
Side View
Bottom View
2–ø6 (ø0.24")
Rear View
8 (0.31")
Front View
93.5
(3.29")
115 (4.53")
Top View
C-CV854D-3
(option)
Flush ceiling mounted view
Designed to mount C-CV854D-3 in a ceiling, with only the camera dome
cover exposed.
Can mount the camera to a double-layer ceiling with gypsum board.
SPECIFICATIONS
Board Thickness for Mounting 25mm (0.98") or less
Finish
Decorative panel: PC resin, light gray
Mounting bracket: Rolled steel plate, black, paint
Mounting Hole Diameter
ø200mm (ø7.87")
Dimensions
ø227 × 80.6 (H)mm (ø8.94" × 3.17")
Weight
930g (2.05 lb)
Accessory
Camera mounting screw (M4×10) × 4, Decorative panel × 1
Applicable Camera
C-CV854D-3
C-CV854D-3
Mounting example
Designed to mount C-CV854D-3 on a pole in conjunction with the
optional C-BC850W and YS-60B.
SPECIFICATIONS
Applicable Pole Diameter
Finish
Dimensions
Weight
Applicable Camera
Option
ø90 – ø340mm (ø3.54" – ø13.39")
Stainless steel
156 (W) × 150 (H) × 62 (D)mm (6.14" × 5.91" × 2.44")
660g (1.46 lb)
C-CV44-3, C-CV854D-3
Mounting band: YS-60B
Wall Mounting bracket: C-BC850W
TOA Corporation
www.toa.jp
Specifications are subject to change without notice.
Printed in Japan (0712) 833-61-822-9A u
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising