TOA | C-PH200 | manual | TOA C-PH200 User manual

TOA C-PH200 User manual
NOTES ON BUSHING ASSEMBLY
NOTES ON BUSHING ASSEMBLY
If the bushing’s rubber packing ring is not correctly installed and used, water
can get into the equipment. Warranty service is not applicable to repairs
done for equipment failures caused by the entry of water resulting from a
failure to use the correct packing.
If the bushing’s rubber packing ring is not correctly installed and used, water
can get into the equipment. Warranty service is not applicable to repairs
done for equipment failures caused by the entry of water resulting from a
failure to use the correct packing.
After the bushing is assembled, check to ensure that:
1. The bushing is mounted securely.
2. The rubber packing ring is correctly installed in place.
3. The cap is securely tightened.
After the bushing is assembled, check to ensure that:
1. The bushing is mounted securely.
2. The rubber packing ring is correctly installed in place.
3. The cap is securely tightened.
Cap
Control cable
Rubber packing ring
Bushing
Press securely in place
Cap
Control cable
Rubber packing ring
Bushing
Press securely in place
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising