TOA CC-5525 User manual

TOA CC-5525 User manual
 Zd TOA 1NDOOR PAN AND TILT HEAD CC-5525
HDESCKIPTION
The CC—-5525 Pan and Tilt Head is light—duty unit for CCTV Camera, designed for long, quiet
operation with loads up to 3 kg. Autopan or manual pan operation is determined by the remote
control box.
BSPECIFICATIONS
Power Source 24 V AC,
Power Consumption 4 VA max.
Angular Travel Pan: 3307 +5” max. (autopan), 340° £5" max. (manual)
Tilt: —60" to +60”
Limit Switch Stops Externally adjustable stops
Speed Pan: 4°/s (50 Hz), 4.8°/s (60 Hz)
Tilt: 2°/s (50 Hz), 2.4/s (60 Hz)
Load Rating 3 kg mox.
Service Space Indoor
Operation Temperature | —5°C to +45°C
Operation Humidity 957% or below, relative humidity
Finish External body material: Die—cast aluminum alloy and Molded plastic
Three—tone (milky—white, off-white and black)
Weight 2.4 kg
Accessory Terminal lug -15, Plug (AC power output) +1,
Coaxial cable (530 mm) with BNC connectors on both ends «= 1,
4—pin connector (zoom lens control) + 1, Camera attaching bolt + 2,
Camera mounting table fixing screw -—2, Spring washer (66 mm) +2,
Plain washer (6 mm) 2
BAPPEARANCE
127
108
A
90
108
127
2—6/
~./ mm Wide oval hole
—
N
<
=
Turn mark (red Y
Front View Ol Side View Rear View
Note: 1) Part A (Tilt Head) can be attached upsidedown for inverted mounting use.
2) Camera Mounting Table can be shifted sidewise by 16 mm for camera width
UNIT:mm SCALE:1/6 adjustment.
89H TOA Corporation DWG No: GCCO59A1-1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement