TOA | CS-64U | manual | TOA CS-64U User manual

TOA CS-64U User manual
INSTRUCTION MANUAL
WIDE RANGE SPEAKER
CS-64U
Thank you for purchasing TOA's Wide Range Speaker.
Please carefully follow the instructions in this manual in order to ensure long, trouble-free use of your equipment.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
• Install the speaker only in a location that can structurally support the weight of the speaker and the mounting
bracket. Doing otherwise may result in the speaker falling down and causing personal injury and/or property
damage.
• Do not stand or sit on, nor hang down from the speaker as this may cause it to drop, resulting in personal
injury and/or property damage.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
• Do not operate the speaker for an extended period of time with the sound distorting. This is an indication of a
malfunction, which in turn can cause heat to generate and result in a fire.
2. GENERAL DESCRIPTION AND FEATURES
TOA's CS-64U outdoor speaker features a resin enclosure and stainless steel hardware for all-weather
durability. It is designed to offer the weather resistance and high efficiency of horn speakers combined with
the high sound quality of cone speakers.
3. APPEARANCE AND DIMENSIONS
4. WIRING DIAGRAM
Rotary switch
Black (+)
10 kΩ
Matching
Speaker
transformer component
8Ω
3.3 kΩ
1.7 kΩ
830 Ω
208
233
146
ø13
600
210
121.5
224
205
White (–)
35
Black White
51 51
2-ø11
Unit: mm
0
Note: The rotary switch is factory-preset to 1.7 kΩ.
5. IMPEDANCE CHANGE
The input impedance is factory-preset to 1.7 kΩ.
To change the impedance, change the rear
panel-mounted rotary switch position to the
desired impedance (wattage) using a standard
screwdriver.
Notes
• This speaker is designed to operate on a 70 V
or 100 V line. Do not connect it to the
amplifier's low impedance line.
• No sound is output when the switch is set to
the OFF position.
Caution
Never set the switch to "–" position for 100 V
line operation, as doing so may result in damage
to the speaker.
LINE VOLTAGE
70V
100V
IMP.
6W
830Ω
OFF
3W
6W
1.7kΩ
1.5W
3W
3.3kΩ
0.5W
1W
10kΩ
OFF
Line Voltage
70 V 100 V
6W
–
3W
6W
1.5 W 3 W
0.5 W 1 W
Imp.
830 Ω
1.7 kΩ
3.3 kΩ
10 kΩ
Factory-preset values
Marrets (wire nuts)
6. CONNECTION
Make the connections using marrets (wire nuts)
inside a UL Listed junction box.
Note
This product shall be installed in accordance with
the National Electrical Code, ANSI/NFPA 70.
From Amplifier
(–)
(+)
(+)
(–)
From Speaker
UL Listed Junction Box
7. INSTALLATION
[Mounting on the Wall]
g
su
lin
ei
e
ac
ce
rf
rfa
su
Wa
ll
C
• Be sure to direct the speaker
down towards the ground.
Otherwise, rain floods the
speaker, causing its failure.
• No mounting hardware such
as bolts and nuts is supplied
with the speaker.
Use commercial mounting
hardware appropriate for the
installation environment.
• Please install only with either
flexible conduit or flexible
wiring.
[Mounting under the Eaves
or on the Ceiling]
8. SPECIFICATIONS
Speaker Component
Rated Input
Impedance
Frequency Response
Sensitivity
Finish
Body
Bracket
Net
Dimensions
Weight
12 cm cone speaker
6W
(830 Ω)*, 1.7 kΩ, 3.3 kΩ, 10 kΩ
130 – 13,000 Hz
96 dB (1 W, 1 m)
ABS resin, off-white, paint
Stainless steel
Zinc-coated steel, gray, paint
233 (w) x 224 (h) x 208 (d) mm
1.5 kg
* Impedance for 70 V line
Note
The design and specifications are subject to
change without notice for improvement.
URL: http://www.toa.jp/
533-06-110-5B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising