TOA | D-2012AS | manual | TOA D-2012AS User manual

TOA D-2012AS User manual
ASSEMBLING MANUAL
CONSOLE CASE
D-2012AS
Thank you for purchasing TOA's Console Case.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1. SAFETY PRECAUTIONS
Be sure to follow all the precautionary instructions in this section, which contain important cautions regarding
safety.
After reading, keep this manual handy for future reference.
CAUTION
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
• Avoid touching the decorative panel's sharp metal edge to prevent injury.
2. GENERAL DESCRIPTION
The D-2012AS Console Case is a desk mount kit for the D-2012C Remote Console Unit, which includes an
armrest, side and decorative panels.
3. COMPONENT PARTS
Machine screw M4 x 10:
4 pieces
Side panel L
Side panel R
Armrest
Decorative panels
Machine screw
M4 x 25 (with washer):
11 pieces
Rubber foot: 4 pieces
4. HOW TO ASSEMBLE
Step 1. Remove 3 screws on each side of
the D-2012C to detach the rack
mounting brackets.
The removed screws are not
used.
Rack mounting bracket
D-2012C
Step 2. Attach the 4 rubber feet to the bottom surface of the D2012C using the 4 supplied screws.
Be sure to attach the rubber feet, as the air vents are
provided at the bottom surface.
Machine screw
M4 x 10*
Rubber foot*
Step 3. Attach the side panel L to the left side of the D-2012C
and side panel R to its right side with 2 each screws.
Step 4. Fit each decorative panel into the holes on the side
panels L and R, then secure them with 2 each screws
from the side panels inside.
Decorative panel*
3
Machine screw M4 x 25
(with washer)*
Side panel R*
4
Side panel L*
Machine screw M4 x 25
(with washer)*
Step 5. Attach the armrest to the D-2012C's front panel with 3 screws.
[Finished assembly]
Machine screw
M4 x 25
(with washer)*
Armrest*
* Component parts of the D-2012AS.
5. SPECIFICATIONS
Finish
Dimensions
Weight
Side panels:
MDF, paint, black, mat finish
Armrest:
MDF, leather upholstery, black, mat finish
Decorative panels: Stainless steel, silver
505 (w) x 127.5 (h) x 333.4 (d) mm or 19.88" x 5.02" x 13.13" (assembled)
2.3 kg or 5.07 lb (this product only), 7.5 kg or 16.54 lb (assembled)
Note: The design and specifications are subject to change without notice for improvement.
URL: http://www.toa.jp/
133-22-164-60
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising