TOA D-2012C KR User manual

TOA D-2012C KR User manual
 zd TOA REMOTE CONSOLE UNIT D-2012C(KR)
BDESCRIPTION
The D-2012C is a OÙ rack mountable Remote Console Unit designed for exclusive use with the
D-2008SP Digital Mixing Processor Unit. Assigned to any desired channels inside the D-20085P by
the dedicated software, the D—2012Cs 12 motorized faders and 8 rotary encoders can remotely
adjust their volumes. Desired preset memories can be recalled using 8 function keys.
[tis equipped with 1 channel line input (stereo), which allows the audio signal to be transmitted
to the 008SP via monitor bus. Audio signals inside the D-2008SP can be monitored via monitor
bus througf headphones connected to a stereo headphone output. The D-2012C can be installed on
a desk with the additional use of an optional D-2012AS Console Case.
MSPECIFICATIÓNS x 0 dB = 0.775 V
Power Source 220 V AC, 60 Hz
—
Power Consumption 18 W
Volume Adjustment 100 mm motorized fader x 12
Rotary encoder x 8
Line Input | channel (stereo), +10 to —20 dBx, 10 kQ, unbalanced, RCA Pin—jack
Headphone Output | Stereo 100 mW + 100 mW (32 © load), standard stereo phone- jack
Monitor Bus 1 stereo input, 1 stereo output
Connector: RJ45 connector
Connection cable: Shielded twisted pair (STP) Cat 5 or higher LAN cable (2 pairs of data lines)
Maximum cable distance: 100 m (109.36 yd) (between D-2012C and D-2008SP)
LAN Network 1/F: 10BASE—T/100BASE—TX (Automatic—Negotiation)
RJ45 connector, Connected via a switching hub
Network protocol: TCP/IP
Connection cable: Shielded twisted pair (STP) Cat 5 or higher LAN cable
Maximum cable distance: 100 m (109.36 yd) (between D-2008SP and switching hub)
09E
Control RS—232C: D-sub connector (9 pins) for maintenance use
Finish Panel: Surface—treated steel plate, Laminated with polycarbonate sheet, gray, mat
Rack mounting bracket: Surface—treated steel plate, gray, mat
Dimensions 482 (W) X 266 (H) X 138 (D) mm (18.98 X 10.47" X 5.43")
Weight 6.6 kg (14.55 Ib)
Accessory Power cord (2 m (6.5 ft)) --- 1, Rack mounting screw --: 4,
Fader knob (yellow) 3, Fader knob (red) ---3, Cord clamp (fitting screw) 1
Option Console case: D-2012AS
A
TOA Corporation DWG No: GD—01EA1
> 00000000000008B000 00000000g000000000 000000000000000000 = г
Figure as viewed from point A q /
482 [18.98”] = 138 [5.437]
465 [18.317] > 123 [4.847]
нада!
WTA (CJC JC JCJ JCJ] Fe o o
© dOOOOONOON --0eHt | Ge
E 54 34 E: | =
Front View Oooo == CU |
ОВОС о | Side View | |
>> aire |
— |
fe TE о |= e
A EA ESE ETES О | © |
© | ©
ЭС — |
=
UNIT:mm SCALE:1/5 95.6 [3.76 | -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement