TOA | DP-L2 CU | Specification Sheet | TOA DP-L2 CU Specification

TOA DP-L2 CU Specification
DIGITAL AMBIENT NOISE
CONTROLLER
DP-L2
DESCRIPTION
FEATURES
TOA's DP-L2 is a rack-mountable digital audio processor with
an ambient noise control (ANC) function that automatically
adjusts output volume in response to changing ambient noise
levels. Typical applications would include airports, stations and
shopping malls, as well as restaurants and pubs.
● Digital ambient noise control (ANC) function with 4-LED
metering automatically makes adjustments to output gain to
match changes in ambient noise levels.
Conventional ambient noise controllers simply add the output
to the ambient noise, making manual compensatory
adjustments necessary. The DP-L2 features an automatic
level control (ALC) function that automatically adjusts the input
signal to keep it at a level suitable for the surrounding ambient
noise level, thus ensuring an appropriate input signal level at
all times.
The DP-L2 has 2 x Input 2 x Output, 1 x Ambient Noise
Sensor Microphone Input and 1 x Monitor Output connectors.
A range of microphones may be used for detecting ambient
noise, including ceiling flush-mounted, dynamic and
condenser types. Easy setting of all functions can be made
right at the unit, thanks to keys and knobs and an LCD (liquid
crystal display) which are all front-mounted. A protect function
prevents accidental changes in front-panel key settings. In
addition, front-mounted LED meters are provided for the input,
output, ALC and ANC levels.
● Exclusive TOA feature distinguishes unit output sound level
from ambient noise levels, for more accurate automatic
noise control.
● Monitoring output of sound picked up by the ambient noise
sensor microphone.
● Automatic level control feature with 4-LED metering
maintains input signal at a constant level by adjusting input
signals to appropriate levels when the sound level is too low.
Sound volume is controlled without losing nuances of
speech or compromising background music sound quality.
This prevents the sort of unnatural sound that often results
when an AGC or a compressor is used.
● Maximum Output function acts as a limiter. It should be set
to the rated input of the equipment to which the DP-L12's
outputs are connected.
● Sensor input reference level fine adjustment function.
● Sensor input phantom power switch.
● 8-LED input and output level metering on front panel.
● Auto input sensitivity setting and sensor input reference
level measuring.
● The LCD screen, keys and knobs are all located on the
front panel, ensuring easy operation of all settings.
● A built-in key lock function protects against accidental
mistakes in front-panel key settings.
● Standard 1U-size (44.5mm/19-inch) rack-mountable for
easier and quicker installation.
● Pre-coated black steel plate finish.
DP-L2
CONNECTION EXAMPLES
When broadcasting is done via a microphone while BGM is on
Monitor Speaker
Power amplifier
Sensor microphone
(for detecting
ambient noise)
DP-L2
POWER
ON
RS-232C
OUTPUT 2 [+4dB]
E C H
OUTPUT 1 [+4dB]
E C H
MONITOR OUT [+4dB]
E C H
INPUT 2 [+4/–8/–20dB]
E C H
INPUT 1 [+4/–8/–20dB]
E C H
GND
LIFT
NORM
GND
LIFT
SENSOR [+4/–48dB]
E C H +15V DC PHANTOM
NORM
OFF
ON
SIGNAL
GND
BGM
ANNOUNCE
Stereo mixer
INPUT
Speaker
Microphone
Power amplifiers
BGM player
When broadcasting BGM in stereo
Monitor Speaker
Power amplifier
Sensor microphone
(for detecting
ambient noise)
DP-L2
POWER
ON
RS-232C
OUTPUT 2 [+4dB]
E C H
OUTPUT 1 [+4dB]
E C H
MONITOR OUT [+4dB]
E C H
INPUT 2 [+4/–8/–20dB]
E C H
GND
LIFT
INPUT 1 [+4/–8/–20dB]
E C H
NORM
SIGNAL
GND
Speaker
PROTECT
PEAK
SIGNAL
SIGNAL
VR BYPASS
19 16 14
POWER
PROTECT
CH 2
12
22
10
54
2
66
1
0
19 16 14
12
25
8
45
– dB
PEAK
VR BYPASS
CH 1
22
25
28
32
38
10
28
6
32
4
38
3
45
8
6
4
3
54
2
66
1
– dB
0
Power amplifier
BGM player
GND
LIFT
SENSOR [+4/–48dB]
E C H +15V DC PHANTOM
NORM
OFF
ON
BLOCK DIAGRAM
+15 V
SENSOR
+15 V
Phantom
Power
H
SENSOR C
SENSOR H
E
A/D
HA
D/A
H
+4/–48 dB*
HA
INPUT 1 C
INPUT 1 H
E
A/D
DSP
D/A
–∞ ~ +12 dB
C
H MONITOR
C OUT
SENSOR C
SENSOR H
At power OFF
At power OFF
INPUT 1
LA
–∞ ~ +12 dB
C
LA
E
H
C
INPUT 1 C
INPUT 1 H
At power OFF
+4/–8/–20 dB*
At power OFF
(+4 dB*)
OUTPUT 1
(+4 dB*)
E
GND LIFT
H
INPUT 2
LA
–∞ ~ +12 dB
INPUT 2 C
E
D/A
A/D
HA
C
H
C
INPUT 2 C
INPUT 2 H
At power OFF
+4/–8/–20 dB*
At power OFF
OUTPUT 2
(+4 dB*)
E
GND LIFT
Key/Rotary Encoder/Rotary Switch
CPU
LCD Display
Level Meter
ALC/ANC STATUS
* 0 dB=0.775 V
APPEARANCE (DP-L2 CU)
SPECIFICATIONS
* 0dB = 0.775 V
DP-L2
Power Source
AC mains, 50/60Hz
Power Consumption
20W
Frequency Response
48kHz
20 — 20,000Hz, ±1dB
Dynamic Range
Over 108dB (IHF-A weighted)
Distortion
Under 0.006%, 1kHz, +4dB* input/output (20 — 20,000Hz BPF)
Input
Sensor input (Ambient noise sensor microphone input):
+4/–48dB* changeable, 10kΩ, electronically-balanced, removable terminal block (4 pins),
phantom power (+15V DC, can be turned on or off with Phantom switch) with +15V DC terminal
Input 1, 2: +4/–8/–20dB* changeable, 15kΩ, electronically-balanced,
removable terminal block (3 pins)
Output
Monitor output:+4dB*, 600Ω, electronically-balanced, removable terminal block (3 pins)
Output 1, 2: +4dB*, 600Ω, electronically-balanced, removable terminal block (3 pins)
A/D Converter
24 bit
D/A Converter
24 bit
Signal Processing
Sampling Frequency
Automatic Level
Control Function
Level meter (4 LED meters), Automatic input signal level control function.
Automatic input sensitivity setting function: +4/–8/–20dB*,
Noise gate level setting: –99 to –3dB
Ambient Noise
Control Function
Level meter (4 LED meters). BGM/Announce level control function,
Automatic sensor input reference level measuring function,
Sensor input reference level fine adjustment function,
Maximum output signal level control: –15 to 0dB,
Minimum output signal level control: –18 to –3dB,
Sample time setting: 10 s, 20 s, 30 s, 1 min, 5 min
Gain ratio setting (Ambient noise; Output signal level) 6: 3, 5: 3, 4: 3, 3: 3, 3: 4, 3: 5, 3:6,
Ambient noise measuring frequency setting: 20 — 20,000Hz, 3 points
Maximum Output Signal
Level Control Function
–12, –6, 0, +4, +6, +12, +18, +24dB*
Input Level Indicator
8 LEDs indicator
Output Level Indicator
8 LEDs indicator
Other Feature
Phantom power switch (sensor input), Key lock function,
Ground lift switch (INPUT 1, INPUT 2), Input/Output bypass function in power off
Operating Temperature
O°C to +40°C
Operating Humidity
Under 90% RH (no condensation)
Finish
Pre-coated steel plate, black, 30% gloss
Dimensions
482 (W) × 44 (H) × 303 D)mm
Weight
3.7kg
Accessory
Power cord (2m) × 1,
Removable terminal plug (4 pins) ×1,
Removable terminal plug (3 pins) × 5
Note: Prepare ambient noise sensor microphone separately.
APPEARANCE AND DIMENSIONAL DIAGRAM
422
303
285
6.1
31.8
44
482
465
unit: mm
TOA Corporation
URL : www.toa.jp/
Specifications are subject to change without notice.
Printed in Japan (0506) 833--- U
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising