TOA | EM-410 | Specification Sheet | TOA EM-410 Specification

TOA EM-410 Specification
EM-410
Lavalier Microphone
APPEARANCE AND
DIMENSIONAL DIAGRAM
Windscreen (accessory)
VP-1241/1361
DESCRIPTION
The TOA EM-410 is designed with a focus on clear, accurate voice
reproduction with maximum intelligibility, making it ideal for such
applications as lectures and religious services. It is equipped with an
electret condenser microphone element that has a hypercardioid
pickup pattern, and which rejects undesirable off-axis sound, to
minimize potential feedback. The EM-410 is designed to prevent sound
degradation when it is attached at the chest, so as to cut noise and
ensure optimal performance. The microphone's capsule rotates 360
degrees, allowing the best possible pickup angle, according to where
the microphone is worn.
ø7.5 (ø0.3")
Clip Holder (accessory)
28.6 (1.13")
Microphone
ø12
(0.47")
17.6 (0.69")
Phone plug
81 (3.19")
112 (4.41")
ø14 (ø0.55")
5000 (16.4 ft)
VP-1061/1121
35 (1.38")
ø6.3 (ø0.25")
ø8.9 (ø0.35")
unit: mm
Windscreen
(accessory)
Mic Holder
Cable Holder
Mounting example
FEATURES
• Ideal for voice-oriented applications such as lectures, presentations
and religious services.
• Compact electret condenser microphone element with hypercardioid
pattern for highly focused pickup.
• Designed for best performance when attached to the chest area.
• The cable holder minimizes noise from cable and clothes rustling.
• Capsule rotates 360 degrees, for optimal pickup even when worn on
a lapel.
• Phantom power range of 9 to 52 volts enhances operational versatility.
Power circuit
Filter circuit
Hot
Cold
Shield
Body earth
Circuit diagram
Body earth
TOA Corporation EM-410 1/2
SPECIFICATIONS
Element
Polar Pattern
Rated Impedance
Rated Sensitivity
Phantom Power
Frequency Response
Output Connector
Cable Length
Operating Temperature
Finish
Dimensions
Weight
Accessory
Electret condenser
Hypercardioid
120Ω, balanced
–47dB (1kHz 0dB = 1V/Pa)
9 – 52V DC
100Hz – 15kHz
Blanced-phone plug
5.0m (16.4 ft)
0°C to +40°C (32°F to 104°F)
Body: Copper alloy, black, semi-gloss, paint
ø8.9 × 28.6mm (ø0.35" × 1.13") (cord excluded)
100g (0.22 lb)
Windscreen × 1, Clip Holder × 1
CHARACTERISTIC DIAGRAMS
Frequency Response
[dB]
20
The lightweight miniature lavalier microphone shall
be able to be clipped to a shirt or jacket, and shall
have a hypercardioid electret condenser microphone
element, for highly focused pickup and rejection of
off-axis sound. The microphone shall be designed
for best performance when it is attached at the
chest. The microphone capsule shall rotate 360°, to
enable the best possible pickup angle when worn on
a lapel. Frequency response shall be 100 Hz to 15
kHz. Rated impedance shall be 120 Ω, balanced,
and rated sensitivity shall be –47 dB (1 kHz 0 dB=1
V/Pa). The microphone shall be powered by any
phantom power source supplying 9 – 52 volts.
The output connector shall be a balanced-phone
plug, and cable length shall be 5.0 m (16.4 ft).
Operating temperature shall be 0° C to +40° C (32°
F to 104° F). Body finish shall be copper alloy, with
black semi-gloss paint. Dimensions shall be ø8.9 ×
28.6 mm (ø0.35" × 1.13") (cord excluded), and
weight shall be 100 g (0.22 lb). A windscreen and a
clip holder shall be provided as accessories. With
clear and accurate voice reproduction, the
microphone shall be suited for such applications as
lectures and religious services.
The lavalier microphone shall be TOA model
EM-410.
10
Response
ARCHITECTURAL AND
ENGINEERING SPECIFICATIONS
–0
–10
–20
–30
20
50
100
500
1k
5k
Frequency
10k
20k
[Hz]
Polar Response
330°
0°
5
30°
0
–5
–10
300°
60°
–15
–20
270°
90°
240°
120°
150°
210°
180°
1kHz
2kHz
4kHz
8kHz
TOA Corporation
www.toa.jp
TOA Corporation EM-410 2/2
Specifications are subject to change without notice.
(1010) 833-62-505-2A u
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising