TOA F-1000W User manual

TOA F-1000W User manual
 zd TOA SPEAKER SYSTEM F—1000W
BDESCRIPTION
The F—1000 Series Speaker are compact two—way speaker systems designed for high efficiency,
wide range, and high power input handling capability. These speaker systems can be installed in
a manner ideal for the location and intended application.
BSPECIFICATIONS
Enclosure Bass—reflex type
Power Handling Capacity Continuous pink noise: 30 W
Continuous program: 90 W
Rated Impedance 8 Q
Sensitivity 07 dB (1 W, 1 m) at installation in 1/2 free sound field
Frequency Response 95 — 20,000 Hz, —10 dB at installation in 1/2 free sound field
Crossover Frequency D kHz
Directivity Angle Horizontal: 90°, Vertical: 90°
Speaker Component Low frequency: 10 cm (47) cone—type
High frequency: Balanced dome tweeter
Input Terminal Push—in terminal
Finish Enclosure: HIPS, white
Punched net: Surface—treated steel plate, white, paint
Joint bracket, wall bracket: Steel plate, 11.6, white, paint
Speaker bracket: Die—cast aluminum, white, paint
Dimensions 130 (W) X 202 (H) X 131 (D) mm (5.12" X 7.95" X 5.16")
Weight 1.0 kg (3.97 Ib) (including the supplied brackets)
Accessory Speaker bracket 1, Joint bracket --1, Wall bracket -1,
Bracket fixing screw -1 set
Option Board hanger bracket: HY-BH10B
Ceiling mount bracket: HY-CM10W (used for the horizontal speaker mounting)
Cluster bracket: HY-CL10B
Speaker stand: SI—16A
Note: Bolts and nuts for mounting the bracket to the wall or ceiling are not included.
Prepare them separately.
BAPPEARANCE 2—M5 (depth 14[0.55”
for bracket mounting
130 [5.12”] | I 131 [5.16”] 30 [1.18”]
| | |"
A
fT
—! —_
SAT T=
Lo Lo
NN В NN —
a 10
= cs =
7 > >
И N L_1
/ \ 5
| | A
|
\
\ /
a 0
Front View Side View Rear View
2-M5 (depth 14[0.55"])*
(for bracket mounting)
* Hole plugs are pre—fitted into
the holes at the factory.
Bottom View Before attaching the speaker
—— mounting bracket to this side,
remove hem using a pointed
ool.
UNIT:mm SCALE: 1/3
0/B
TOA Corporation DWG No: GF—02TA1
zd TOA
ШАРРЕАКАМСЕ
(48) 45
[1.897] | | —,
30 =|
1.187 2
© |
o
о
|
4—06[80.24”]
Dimensions of
wall mounting hole
SPEAKER
(227 [8.94”])
SYSTEM
Wall bracket
(accessory)
202 [7.95”]
202 [7.95”]
71 [2.8]
71 [2.8”]
(wall bracket
(accessory))
(scale: 1/3)
(53.2)
Y
Up to 82° left or right is
adjustable in a horizontal
direction. (x2)
~
Wall bracket(accessory)
у \ NN NN NN
Up to 49° left or right is
adjustable in a horizontal
direction. (x3)
Wall mounting example
(212 [8.35”])
184 [7.24”]
NANO
|
у \ NN NN NN
F—1000W
(x1) The speaker vertical angle
adjustable in 7.5" steps.
(x2) Adjustable angle
(vertical speaker mounting)
В Horizontal
Vertical
(*3) Adjustable angle
В Horizontal
Vertical
Joint bracket (accessory)
184 [7.24]
53 [2.09”]
53 [2.09”]
TD
N
Joint bracket
N
(44[1.73” ])
Dimensions of wall or
ceiling mount hole
(joint bracket (accessory))
Only the vertical angle is
Mounting the speaker close to a wall surface
Only the vertical angle
adjustable.
ANN NN NN NN]
(accessory)
is
CORR Si
(53.2)
Pa al E
TR
—
Dimensions of
optional stand
mounting hole
(joint bracket (accessory))
(scale: 1/3)
adjustable.
(scale: 1/3)
O
Joint bracket (accessory)
‚ Mm
M ПОНИ 3
The speaker faces
" downward when | X
bracket mounting to Q —
a horizontal surface. \ я
| N ©
x ©
N
>,
7 Mm
/ 10
/ CN
/
/
a
Only the vertical angle is
adjustable.
Ceiling mount example
(Only the vertical speaker mounting is allowed.)
UNIT:mm SCALE: 1/6
ST—16A (option)
(accessory)
Optional stand mounting example
(Only the vertical speaker mounting is allowed.)
(scale: 1/15)
0/B
TOA Corporation
DWG No: GF-OPTC1
(horizontal speaker mounting)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement