TOA HX-7W-WP User manual

TOA HX-7W-WP User manual
The HX-7W-WP is a 2-way compact speaker system that PE don both constant directivity control over
a wide frequency range and changes in vertical directivity. [ts adopted wave front control technology
is ideal for reproducing clear sound in spaces with long reverberation times or high background noise.
The speaker is designed to be installed under the eaves when used outdoors.
Enclosure Sealed type
Power Handling Capacity Continuous pink noise: 250 W (1EC60268—5: 350 W)
Continuous program: 750 W
Rated Impedance 8 Q
Sensitivity 100 dB (1 W, 1 m)
Frequency Response 105 Hz — 20 kHz
Crossover Frequency 1.7 kHz
Directivity Angle Horizontal: 100°
Vertical: Depending on directivity angle mode
Speaker Component Low frequency: 13 cm (5.57) cone—type X 8
High frequency. Wave front control horn with compression driver X 4
Input Terminal M4 screw terminal, distance between barriers: 9 mm (0.35)
Water Protection IPX4 (Install with every speaker module tilted downward from the horizontal.)
Finish Enclosure: Polypropylene, white
Punched net: Surface—treated steel plate, white, rust proof coating
Dimensions 497 (W) X 664 (H) X 274 (D) mm (19.57 X 26.14" X 10.79")
Weight 30 kg (66.14 Ib)
Accessory Terminal cover --1, Terminal cover mounting screw --4, Rubber packing --1
Option Matching transformer: MT—-200x
Matching transformer adapter: HY-MT/
Speaker mounting bracket: HY-IM/W-WP, HY-MS/W-WP, HY-60DW-WP, HY-CN7W-WP
* When mounting the MT-200 Matching Transformer to the speaker, an optional HY—MT7 Matching Transformer
Adapter is required.
Notes: It features the water—protection construction (1PX4), however it is recommended that it be installed
under roofs, eaves, or other locations not directly exposed to rain or snow.
Every speaker module must be aimed horizontally or down to keep the weather resistant capability.
BAPPEARANCE (Factory preset: 0° mode)
Top View
497 [19.57”] 274 [10.79”]
| Г
664 [26.14”]
Front View Side View Rear View
UNIT: mm SCALE:1/10
14K TOA Corporation DWG No: GHXOOBA1—3
Example for directivity angle modes
326 [12.83”] 368 [14.497] 399 [15.717]
665 [21.187]
657 [25.877]
638.4 [25.137]
44 [1.73]
5 [0.2
34 [1.3477 [0.27] 55.5
| [2.197]
— — Ek |
© =
+ io 3m
- SN 2
— © ©)
© 39 г
4—04.5 [0.18”1/ `
Jo set the speaker angle mode to Enlarged figure for
50" mos "60° mode.” 3 pieces of the optiona the terminal cover (accessory)
OU mode HY—-60DW—WP Speaker Angle Brackets (scale: 1/4)
are required.
Terminal cover installation view
(scale: 1/15) 319.7 [12.59”]
| 46.1 [1.817] 131.2 [5.17”]
23 [0.91”]
245.2 [9.65”]
Terminal cover
UNIT: mm SCALE:1/10
14K TOA Corporation DWG No: GHX00BC1-1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF