TOA | ML-11T | manual | TOA ML-11T User manual

TOA ML-11T User manual
900 SERIES PLUG-IN MODULE
ML-11T
3. JUMPER SETTINGS
VOX
SJP101 SJP102
1. GENERAL DESCRIPTION
The ML-11T is a Microphone/Line input module with mute
send/receive functions designed for use with the 900
series amplifiers. This module also features phantom
power supply for use of a condenser microphone.
VOX
OFF ON
SJP101 SJP102
OFF ON
CUT
H y s t e r e s i s OFF
Receive Send N/A
SJP104
MUTE 1
SJP103
MUTE 2
CUT
H y s t e r e s i s OFF
2. FUNCTIONS OF EACH PART
1
2
3
4
5
6
7
Hot Cold Earth
[Front View]
(1) Turn CCW to increase the
dynamic sensitivity for VOX
(Voice Operated Switch) or
MUTE send, and CW to
reduce it. (Factory preset:
Fully CCW)
(2) Turn toward "C" to cut low
frequency and fully toward
"F" to get flat characteristics.
(Factory preset: Fully toward
"F")
(3) Turn toward "C" to cut high
frequency and fully toward
"F" to get flat characteristics.
(Factory preset: Fully toward
"F")
(4) Turn CCW to reduce gain and CW to increase it.
(Factory preset: Fully CW)
(5) Turn CCW to reduce output level and CW to increase
it. (Factory preset: Fully CW)
(6) Selects input source from LINE (AUX input), MIC
(Microphone input, factory-preset), and MIC
PHANTOM ON (Phantom-powered microphone input).
(7) Input connector: Connects the supplied 3P removable
terminal plug.
[Side view]
Receive Send N/A
SJP104
MUTE 1
SJP103
MUTE 2
Setting
Designator
SJP101
Cutting the jumper disables hysteresis during
VOX or MUTE send (if so set) operation.
OFF: Disables VOX.
SJP102
ON : Enables VOX.
SPJ103
(for MUTE 2)
Rceive:
This module is muted when the MUTE 1 or 2 bus
is short-circuited by other module.
SPJ104
(for MUTE 1)
Send:
Mutes other modules connected to the MUTE 1
or 2 bus when the signal is input to this module.
N/A: Mute function not applicable
3. SPECIFICATION
Power Source:
+24 V DC, 25 mA, phantom power +24 V DC
Gain:
10 to 50 dB
Operating Temperature: -10 to +40°C
Finish:
Panel: Aluminum, hair-line
Accessory:
Removable terminal plug (3 pins) ... 1
Module mounting screw... 2
Printed in China
133-12-981-20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising