TOA N-8010RS CU User manual

TOA N-8010RS CU User manual
 zd TOA
BDESCRIPTIÓN
The N-8010RS is a Sub-station interface unit designed for use with TOA's packet intercom system
(IP network—compatible intercom system) that employs the packet audio technology.
Up to 16 sub-stations can be connected using 2—core shielded cables.
The number of LAN-connected N-8000 system components such as the N-8010RS and IP intercom
exchanges is 192 maximum in total.
Connecting the unit to the LAN permits the sub-station to receive Paging calls and make calls to both
the master station connected to the IP intercom exchange and the
SUB STATION INTERFACE UNIT N—8010RS(CU)
master station.
[t can be mounted in an EIA equipment rack (1U size) with the use of an accessory rack mounting
bracket or installed on a wall using an optional wall mounting bracket.
BSPECIFICATIONS
Power Source
120 V AC, 50/60 Hz
Power Consumption
26 W (at rated), 32 W (max.)
Interface Section
for Sub—station
Number of lines: 16 lines
Number of speech link: 1 link
Transmission system: Analog baseband
Transmission range: 500 m (546.81 yd)/80.5 mm (AWG24), 800 т (874.89 yd)/
90.65 mm (AWG21), 1300 m (1421.7 yd)/80.9 mm (AWG19)
Speech method: Half—duplex conversation by way of voice switch
Connector: Removable terminal block (3 pins)
Wiring method: Two—core shielded cable
Audio output: Max. 1 W/line (conversation), Max. 0.5 W/line (paging)
Feeding voltage/current: 22 V DC, 30 mA max.
Control signal: Call in button detection, privacy button detection, hook detection
Network Section
Network I/F: 10BASE-T/100BASE-TX (Automatic—Negotiation)
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast, Multicast
Number of paging destinations: 0, *Reception only
Connector: RJ45 connector
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
Quantifying bit number: 16-bit
Voice encoding method: Sub—band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software)
Indication
Network LNK/ACT indication, Status lamp, Power—on indication lamp
Other
Firmware update function, System data hold function, Reset switch (front panel),
Forced air cooling
Setting Method
Rack, Desk, Surface mount
Operating Temperature
О °С to +40 C (32 + to 104 °F)
Operating Humidity
90 ZRH or less (no condensation)
Finish Pre—coated steel plate, black, 30 7% gloss
Dimensions 420 (W) X 44.3 (H) X 325.5 (D) mm (16.54 X 1.74 X 12.81)
Weight 3.8 kg (8.38 |b)
Accessory Power cord (2 m (6.56 ft)) -1, CD (for PC setting, maintenance use) 1,
Removable terminal plug (3 pins) 16, Plastic foot 4, Screw for fitting plastic foot --4,
Rack mounting bracket 2, Screw for mounting bracket --8, Screw for rack mounting 4
Option Wall mounting bracket: YC—850
ШАРРЕАКАМСЕ
120V—420mA 50/60Hz С e , LAN
wel de De Hes
Ad SIGNAL GND SUB STATION INTERFACE UNIT model N—8010RS CU TOA Corporation MADE IN TAIWAN
420 [16.547]
le ol
I >|
Fú TOA A,
Front View = ne Ee ba i y
<=
325.5 [12.817] ‚|
309 [12.177] |,
|
(Te »W—--——-—-——
Side View == On TT O
De ON |
LJ LC
UNIT:mm SCALE:1/5
09L
TOA Corporation DWG No: GN—01LA1-3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement