TOA N-8031SB User manual
Add to my manuals1 Pages
TOA N-8031SB master station board offers hands-free conversation and can be used with an optional handset (RS-191) for traditional handset conversations. It supports 2-wire, 160 kbps echo-cancelling transmission systems with a maximum transmission range of 1500 meters. The device features a built-in speaker and microphone, as well as terminals for connecting external devices. It operates on 48V DC power supplied by an IP intercom exchange and has a power consumption of 1.8W (rated) and 2.4W (max).
advertisement
◉
Touch to zoom
zd TOA MASTER STATION BOARD N-8031SB MOESCRIPTIÓN The N-8031SB is a printed circuit board unit for the N-8031MS Flush—mount Hands—Free Master Station, You can make the master station suitable for applications using the N-8031SB in combination With the operation panel section to be prepared separately. BSPECIFICATIONS x0dB=1V Power Source 48 V DC (supplied from the IP intercom exchange (option)) Power Consumption 1.8 W (at rated), 2.4 W (max.) Wiring Method Non—polar one pair stranded wire system Transmission System 2 wire 160 kbps echo canceller transmission system Signal Level Under O dBx Speech Method Hands—free conversation (Handset conversation can be established in conjunction with the RS-191 (option)). Audio Frequency Range | 300 — 7,000 Hz Transmission Range Max. 1500 m (890.65 mm, Loop resistance 1/0 Q) Hands—free Speaker (accessory): 5.7 cm cone—type, 0.6 W, 8 Q Microphone (accessory): Omni—directional electret condenser microphone Line Connection Terminal | Pin header (2 pins) Status Indicator LED Solderless connector (2 pins, male), voltage: 5 V, maximum load current: 5 mA Connecting Terminal Dial Input Solderless connector (10 pins, male), open voltage: 3.3 V DC, short—circuit current: 1 mA External Dial Input No—voltage make contact input, open voltage: 5 V DC, short—circuit current: 1 mA, screwless connector (5 pins) Operation Temperature ¡OC to +40°C Operation Humidity Under 90% RH (no condensation) Dimensions 70 (W) x 185 (H) X 20.6 (D) mm Weight 205 q (including accessories) Accessory Removable terminal plug (2 pins, preinstalled on the unit) -1, Handset jumper (8 pins, preinstalled on the unit) 1, Ferrite clamp -1, Hands—free speaker (with connection cord) «À, Hands—free microphone (with connection cord) +1 Option Option handset: RS—191 MAPPEARANCE 20.6 70 52 0—293.5 | X | + | A 20, г ~ Tq + | Г TN ee N gl LD | a —F + + $ Al | LO y Y oO | © LM) o o 2 — O © | DO ON | 1.6 S57 ~ Printed circuit board Hands—free speaker Hands—free microphone (accessory) (accessory) UNIT:mm ~~ SCALE: 1/2 05H TOA Corporation DWG No: GN-00NA1-2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project