TOA N-8400RS CU User manual

TOA N-8400RS CU User manual
 zd TOA
MDESCRI PTION
The N-8400RS is a Sub-station interface unit designed for use with TOA's packet intercom system
(IP network—compatible intercom system) that employs the packet audio technology.
Up to 16 sub-stations can be connected using 2 sets of twisted pair cables.
The number of LAN—connected N—8000 system components such as the N—8400RS and IP intercom
SUB STATION INTERFACE UNIT N—8400RS(CU)
exchanges is 192 maximum in total.
Connecting the unit to the LAN permits the sub-station to receive Paging calls and make calls to both
the master station connected to the IP intercom exchange and the
master station.
[t can be mounted in an EIA equipment rack (1U size) with the use of an accessory rack mounting
bracket or installed on a wall using an optional wall mounting bracket.
BSPECIFICATIONS
Power Source
120 V AC, 50/60 Hz
Power Consumption
35 W (at rated), 50 W (max.)
Interface Section
for Sub—station
Number of lines: 16 lines
Number of speech link: Internal: 1/External: 2
Transmission system: Analog baseband
Transmission range: 1000 m (1093.61 yd)/80.5 mm (AWG24), 1500 m (1640.42 yd)/
90.65 mm (AWG21), 2000 m (2187.23 yd)/80.9 mm (AWG19)
Speech method: Half-duplex conversation by way of voice switch (Hands—free),
Full-duplex (Handset)
Connector: Removable terminal block (4 pins)
Wiring method: 2 sets of twisted pair cables
Audio output: Max. 1 W/line (conversation), Max. 0.5 W/line (paging)
Feeding voltage/current: 24 V DC, 30 mA max.
Control signal: Call in button detection, hook detection
Network Section
Network I/F. 10BASE-T/100BASE—TX (Automatic—Negotiation)
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast, Multicast
Number of paging destinations: 0, *Reception only
Connector: RJ45 connector
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
Quantifying bit number: 16-bit
Voice encoding method: Sub—band ADPCM, Cryptosystem
Voice packet loss recovery. Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software)
[Indication
Network LNK/ACT indication, Status lamp, Power—on indication lamp
Other
Firmware update function, System data hold function, Reset switch (front panel),
Forced air cooling
Setting Method
Rack, Desk, Surface mount
Operating Temperature
0 'C to +40 C (32 + to 104 +)
Operating Humidity
90 ZRH or less (no condensation)
Finish Pre—coated steel plate, black, 30 7% gloss
Dimensions 420 (М) X 44.3 (H) X 325.5 (D) mm (16.54 X 1.74 X 12.81")
Weight 4 kg (8.82 Ib)
Accessory Power cord (2 m (6.56 ft)) 1, CD (for PC setting, maintenance use) -1,
Removable terminal plug (4 pins) -16, Plastic foot 4, Screw for fitting plastic foot 4,
Rack mounting bracket +2, Screw for mounting bracket 8, Screw for rack mounting 4
Option Wall mounting bracket: YC—850
BAPPEARANCE
1204 500mA 50/80Hz С OT | LAN
Rear View || {fg в) ce oe EEE ee EF Е Dei
© La SIGNAL GND SUB STATION INTERFACE UNIT model N—8400RS CU TOA Corporation — MADE IN TAIWAN
420 [16.54]
Le al
в >|
FA TOA г
° RESET LNK/ACT STATUS POWER NM 7
Front View TN {IN
<=
325.5 [12.817] ‚|
309 [12.17”] ‚|
>
(Te QW—--——-———
Side View = O - ог ог ПО ®
ON (ON 000 |
JJ Css
UNIT:mm SCALE:1/3
TOA Corporation
DWG No: GN—01NA1—4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement