TOA | P-1812 UK | manual | TOA P-1812 UK User manual

TOA P-1812 UK User manual
OPERATING INSTRUCTIONS
PA AMPLIFIER
P-1812
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ............................................................................... 3
2. GENERAL DESCRIPTION ............................................................................. 4
3. FEATURES .......................................................................................................... 4
4. NOMENCLATURE AND FUNCTIONS
Front ......................................................................................................................... 5
Rear .......................................................................................................................... 5
5. CONNECTIONS
5.1. Speaker Connections ........................................................................................ 6
5.2. Emergency Control Connection ........................................................................ 6
5.3. Remote Power ON/OFF Control Connection .................................................... 6
5.4. Emergency Input and Control Input Terminal Connections ............................... 7
6. INSTALLATION .................................................................................................. 8
7. RACK MOUNTING ............................................................................................ 8
8. CONTROL SETTING ........................................................................................ 9
9. DIMENSIONAL DIAGRAM ............................................................................. 9
10. INTERNAL MODIFICATION .......................................................................... 10
11. BLOCK DIAGRAM ........................................................................................... 11
12. SPECIFICATIONS ............................................................................................ 12
Accessories ............................................................................................................. 12
Optional products .................................................................................................... 12
2
1. SAFETY PRECAUTIONS
• Be sure to read the instructions in this section carefully before use.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
CAUTION
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
WARNING
When Installing the Unit
• Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
• Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
• Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
When the Unit is in Use
• Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest TOA dealer. Make no further
attempt to operate the unit in this condition as this
may cause fire or electric shock.
· If you detect smoke or a strange smell coming
from the unit.
· If water or any metallic object gets into the unit
· If the unit falls, or the unit case breaks
· If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
· If it is malfunctioning (no tone sounds.)
• To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest TOA dealer.
• Be sure to replace the unit's terminal cover after
connection completion. Because high voltage is
applied to the speaker terminals, never touch these
terminals to avoid electric shock.
• Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
• Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a
gas pipe as a catastrophic disaster may result.
• Do not insert nor drop metallic objects or
flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric
shock.
• Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down, causing personal injury and/or property
damage.
3
CAUTION
When Installing the Unit
• Never plug in nor remove the power supply plug
with wet hands, as doing so may cause electric
shock.
• When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
shock.
• When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit
with the power cord connected to the outlet may
cause damage to the power cord, resulting in fire or
electric shock. When removing the power cord, be
sure to hold its plug to pull.
• Do not block the ventilation slots in the unit's cover.
Doing so may cause heat to build up inside the unit
and result in fire.
• Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in fire or
electric shock.
When the Unit is in Use
• Do not place heavy objects on the unit as this may
cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.
• Make sure that the volume control is set to
minimum position before power is switched on.
Loud noise produced at high volume when power is
switched on can impair hearing.
• Do not operate the unit for an extended period of
time with the sound distorting. This is an indication
of a malfunction, which in turn can cause heat to
generate and result in a fire.
• Contact your TOA dealer as to the cleaning. If dust
is allowed to accumulate in the unit over a long
period of time, a fire or damage to the unit may
result.
• If dust accumulates on the power supply plug or in
the wall AC outlet, a fire may result. Clean it
periodically. In addition, insert the plug in the wall
outlet securely.
• Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a fire or electric
shock.
An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in
the electrical installation of the building.
2. GENERAL DESCRIPTION
TOA's P-1812 PA Amplifier delivers 120 W power output and can be used in conjunction with the A-1800
series PA Amplifiers.
3. FEATURES
• Input level selector switch (–10 dB/0 dB).
• Mountable in a standard 19" equipment rack (2-unit size) using an optional rack mounting bracket.
4
4. NOMENCLATURE AND FUNCTIONS
[Front]
4
2
1
3
1. Power switch
Press to turn ON the power.
Press again to turn the power OFF.
3. Master volume control
Adjusts the output signal level.
4. LED level meter
Indicates an output level.
2. Power indicator
Lights green when the power is switched on.
[Rear]
5
9
6
7
8
10
5. AC inlet
Connects to the supplied power cord.
6. Ground terminal
A functional ground terminal.
7. DC input terminals
Connect to a 24 V DC power supply.
8. Output terminals
Connect to speakers.
9. Remote control terminal block
Permits the unit's power to be remotely turned ON
or OFF by way of make contacts.
For details, refer to p. 6, Emergency Control
Connection and Remote Power ON/OFF Control
Connection.
11
12
10. Line output terminals [LINE OUT]
0 dB, 600 Ω, unbalanced.
Connect to the line input of other equipment.
11. Line input terminals [LINE IN]
0dB or –10 dB, 10 kΩ, balanced.
Connect to the line output of other equipment.
12. Input level selector switch
Selects either –10 dB or 0 dB for the Line input
sensitivity level.
When using the unit in conjunction with the
optional A-1800 series PA Amplifier, select 0 dB
for easier adjustment of the sound volume.
5
5. CONNECTIONS
5.1. Speaker Connections
INPUT
24 V
C
C
INPUT
83 Ω
4 16Ω 100 V
24 V
C
C
83 Ω
4 16Ω 100 V
Total impedance: 83 Ω
4 – 16 Ω
100 V line
Notes
• Both the 4 – 16 Ω and 100 V terminals cannot be used at the same time.
• Impedances indicated in the figures represent the total speaker system (load) impedances.
WARNING
Be sure to attach the supplied terminal cover after connection completion. Because high voltage is
applied to the speaker terminals, never touch these terminals to avoid electric shock.
5.2. Emergency Control Connection
Shorting the Emergency Control terminals forcibly
turns the unit's power ON, delivering signals at the
Line Output and speaker output terminals
bypassing the Master Volume Control.
Internal modification can change this Emergency
control function as follows:
Shorting the control terminals forces the power to
turn off, disabling broadcast from the unit.
Opening the terminals returns the unit operation to
the original broadcast status.
For this modification (p. 10 for details), please
consult your TOA dealer.
REMOTE IN
CONTROL
EMERGENCY
5.3. Remote Power ON/OFF Control Connection
With the P-1812's power turned OFF, it can be remotely turned ON from the optional A-1803, A-1806, or A1812 PA Amplifier by making the Remote IN-OUT terminal connections as shown below. (This remote control
operates only when the P-1812's power is turned OFF.)
P-1812
REMOTE IN
CONTROL
EMERGENCY
6
REMOTE OUT
A-1803
A-1806
A-1812
5.4. Emergency Input and Control Input Terminal Connections
While the Emergency control input terminals remain shorted, the power of all the connected A-1800 series
and P-1812s is turned on, and the A-1800's ZONE 1 and 2 speaker outputs are enabled, allowing only
Emergency input signals to go through bypassing the master volume control.
Opening the control input terminals automatically returns the muted signals to the original level.
A-1803
A-1806
A-1812
REMOTE OUT
CONTROL
EMERGENCY
EMERGENCY
TEL
C
REC OUT
H
LINE OUT
1
2
Connect this cable when requiring
remote power ON/OFF control.
P-1812
REMOTE IN
CONTROL
EMERGENCY
P-1812
REMOTE IN
LINE OUT
LINE IN
LINE OUT
LINE IN
CONTROL
EMERGENCY
7
6. INSTALLATION
Keep the unit's all sides over 10 cm away from objects that may obstruct air flow to prevent the unit's internal
temperature rise.
Over 10 cm
Over 10 cm
Over 10 cm
7. RACK MOUNTING
To mount the unit in a standard 19" equipment rack, use the optional MB-25B Rack Mounting Bracket.
Attach the MB-25B to the unit using the supplied 4 screws. When using other screws, each screw must be
shorter than 16 mm.
M4 x 16 Machine screw included in MB-25B
Amplifiers
MB-25B
PF-013B (optional)
Note
Use the optional PF-013B Perforated Panels to provide
sufficient ventilation when mounting 2 or more units in an
equipment rack.
8
8. CONTROL SETTING
Output levels are adjustable with the Master Volume Control. For music play or announcements, adjust the
Control so that the red indicator doesn't light. Note that the sound quality is downgraded when the red
indicator remains lit.
To prevent the accidental change of the setting of Master Volume Control, remove its knob after setting it to
the desired position and attach the optional YA-920 Volume Control Cover instead.
YA-920 (optional)
Volume control knob
9. DIMENSIONAL DIAGRAM
Unit: mm
420
367
326.5
107.7
88.4
18.5
9
10. INTERNAL MODIFICATION
Leave the modification described here to a qualified service technician only.
Please consult your TOA dealer.
This modification enables the EMERGENCY Control to turn the power off and disable broadcast when
activated.
[Upper view without case]
Rear panel
Main circuit board
SJP100 (EMERGENCY)
Jumper
ON
OFF
Factory-preset position
10
Install the SJP100 jumper to "OFF" position.
ON
OFF
REMOTE IN
+
–
EMERGENCY
CONTROL
INPUT LEVEL
(0 dB/–10 dB)
LINE IN
10 kΩ
0 dB/–10 dB
Relay
POWER
Power for
audio section
Power for
control section
MASTER volume
Emergency
mode ON/OFF
Power ON/OFF
OT
Fuse
Output
level meter
PA
0 dB
JP
Fuse
(70 V)
PT
(Relay)
LINE OUT
0 dB/600 Ω
240 V
230 V
–
Fuse
INPUT
POWER switch
220 – 230 V AC
or 240 V AC,
50/60 Hz
+ 24 V
C
C
4 – 16 Ω
83 Ω (100 V)
11. BLOCK DIAGRAM
11
12. SPECIFICATIONS
Power Source
Rated Output
Power/Current Consumption
Frequency Response
Distortion
Input
Output
S/N Ratio
(Band Pass: 20 – 20,000 Hz)
Control Input
Indicator
Operating Temperature
Finish
Dimensions
Weight
220 – 230 V AC or 240 V AC, 50/60 Hz
24 V DC (M4 screw terminal*2)
120 W
AC operation:
258 W (rated output), 94 W (EN60065)
Under 320 mA (when power switch is OFF)
24 V DC operation: 7.0 A (rated output), 2.7 A (EN60065)
50 – 20,000 Hz (±3 dB)
Under 2% at 1 kHz, rated power
LINE: 0 dB*1/–10 dB*1 (switchable), 10 kΩ, transformer balanced, RCA pin jack
LINE:
0 dB*1, 600 Ω, unbalanced, RCA pin jack
SPEAKER: High impedance (100 V line/83 Ω), M4 screw terminal*2
Low impedance (4 – 16 Ω), M4 screw terminal*2
Note: Both Low and High impedance terminals cannot be used at the same time.
Over 100 dB (Master volume: min)
Over 97 dB (Master volume: max, INPUT LEVEL switch: 0 dB)
Over 90 dB (Master volume: max, INPUT LEVEL switch: –10 dB)
POWER REMOTE: No-voltage make contact input
Open voltage: 24 V DC
Short-circuit: under 1 mA, M3 screw terminal*2
3
EMERGENCY* : No-voltage make contact input
Open voltage: 24 V DC
Short-circuit: under 1 mA, M3 screw terminal*2
5-point LED output level meter, Power indicator LED
–10°C to +40°C
Panel: ABS resin, black, hair line
Case: Steel plate, black
420 (w) x 107.7 (h) x 367 (d) mm
12.2 kg
*1 0 dB = 1 V
*2 Distance between barriers on the above screw terminals: 7 mm (M3 screw), 9 mm (M4 screw)
*3 Operation when activated can be selected from the following: Turning ON the unit's power (factory-preset) or OFF.
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
AC power cord ................................................... 1
Terminal cover ................................................... 1
Terminal cover mounting screw (M4 x 8) ........... 2
• Optional products
Rack mounting bracket: MB-25B
Volume control cover: YA-920
Perforated panel:
PF-013B
133-12-847-9B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising