TOA | RS-142 | manual | TOA RS-142 User manual

TOA RS-142 User manual
INSTALLATION MANUAL
SWITCH BOARD
RS-142
Note: For operation of the units, refer to the N-8000 series operating instructions.
1. GENERAL DESCRIPTION
The RS-142 is a switch board to be connected to the 2-Core Shielded Substation Interface Unit. You can
make desired switch panels to meet intended purposes by combining the RS-142 with the separately prepared
operation panel having 2 switches to be used as call buttons.
The RS-142 features handset conversations by using the RS-141 indoor-use Option Handset in combination.
2. Connections
2.1. When the Option Handset Is Not Used
Substation interface unit
To the substation connection terminal
3P removable terminal plug
(supplied with the Substation
interface unit)
Brown
Red
Orange
2-core shielded cable
Switch for Call button 1*
Brown (A)
Red (B)
Orange (C)
Green (HOT)
Yellow (C+)
Green (B+)
Blue (A+)
Blue (COM)
N.C.
High-impedance speaker
Purple (H)
2-core
shielded
cable
(Impedance: 600 Ω or more)
RS-142
Brown (E+)
White (E-)
Gray (N+)
Orange (N-)
Switch for Call button 2*
* Separately prepare this switch.
Note
Cut out the unused Wire (purple) to avoid short-circuiting.
2.3. When the Option Handset Is Used in Combination
Substation interface unit
To the substation connection terminal
3P removable terminal plug
(supplied with the Substation
interface unit)
Brown
Red
Orange
Brown (A)
Red (B)
Orange (C)
2-core shielded cable
N.C.
Yellow (C+)
Green (B+)
Blue (A+)
Purple (H)
2-core shielded cable
Blue (COM)
High-impedance speaker
(Impedance: 600 Ω or more)
Purple (H)
2-core shielded cable
Note
Cut out unused wires to avoid short-circuiting.
RS-142
Brown (E+)
White (E-)
Gray (N+)
Orange (N-)
Switch for Call button 2*
* Separately prepare this switch.
RS-141
Brown (A)
Red (B)
Orange (C)
Yellow (C+)
Green (B+)
Blue (A+)
Green (HOT)
Switch for Call button 1*
3. INSTALLATION
3.1. Switch Board Installation
3.1.1. Dimensional diagram
36
19
42
23
140 - 160
140 - 160
10 - 20
55
10 - 20
Unit: mm
3.1.2. When making the switch panel to be combined with an electrical box
Put the RS-142 in the YC-801 Flush-mount box mounted in the wall.
Then, connect the cables from RS-142 to the switches mounted on the operation panel separately prepared.
Wall surface
YC-801
Flush-mount box
Operation panel
(separately prepared)
Note
When using the PA paging function, keep the switch panel as far away from the PA paging speaker as possible
to avoid acoustic feedback.
3.2. Option Handset Installation
Mount the option handset to an electrical box mounted in the wall.
[Dimensional diagram]
Wall surface
116
46
71
48
Unit: mm
200 or less
83.5
115
YC-302
2-gang electrical box
(option)
220
Machine screw M4 x 25
(supplied with the RS-141)
Accessory screws
The RS-141 comes with 2 types of screws: M4 x 25 and UNC
No. 6-32 x 18.
For the electrical box provided with unified threads, use the
UNC No. 6-32 x 18.
RS-141
4. SPECIFICATIONS
Call Button Wiring
Wiring
Transmission Range
Operating Temperature
Weight
4 cables (for 2 momentary switches)
2-core shielded cable
500 m/ø0.5 mm (AWG24),
800 m/ø0.65 mm (AWG22),
1300 m/ø0.9 mm (AWG19)
0 to 40°C
30 g
Note: The design and specifications are subject to change without notice for improvement.
• Optional products
Option handset:
RS-141
2-gang electrical box: YC-302
Flush-mount box:
YC-801
URL: http://www.toa.jp/
133-06-00040-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising