TOA SR-H2L User manual

TOA SR-H2L User manual
 zd TOA LINE ARRAY SPEAKER SR-H2L
081
MOESCRIPTIÓN
The SR-H2L Line array speaker forms a linear sound source by the internal speaker units arrayed
vertically in close proximity. It can be used for high—impedance applications with the installation of
the optional MT-50301 Matching transformer.
BSPECIFICATIONS
Enclosure Bass—reflex type
Power Handling Capacity Continuous program: 180 W
Rated Impedance 8 Q
Sensitivity 92 dB (1 W, 1 m equivalent, measured at 4 m)
Frequency Response 80 Hz — 18 kHz (when recommended parameters are applied by the optional DP—SP5)
Directivity Angle Horizontal: 90°, Vertical: O° (within the range of speaker height)
Speaker Component 7 cm (2.8") cone—type X 9
Input Connector Removable input connector
Finish Enclosure: MDF, white, urethane paint
Front grille: Punched steel plate, white, acrylic paint
Dimensions 84 (W) X 668.4 (H) X 115 (D) mm (3.317 X 26.317 X 4.53”)
Weight 4.4 kg (9.7 16)
Option Matching transformer: MT-SO301
Extension plate: SR—EPJ
Wall mounting bracket: SR—-—WB$3
Wall tilt bracket: SR-TBÖ
Flying bracket: SR—FBJ
Stand adapter: SR-SA3 (Applicable stand: S1—-34B)
Digital speaker processor: DP—SP3
BAPPEARANCE
Top View Bass reflex duct 5
(on the top surface only) ©
84 [3.31] 115 [4.53] 40 [1.57] «a
kH— kR— +
a à à
| |
|
| LJ | | Input connector |
. | MT—S0301 (option) Es
mounting panel
| | {Ц —
(TS AN
| | oc dl ©
| 1 i =,
Fo) ©
| | — ® ® м
| 1
O.
Front View || | || | Side View Rear View |
C7 +
|8 i +
| ©
| | |
DO =
| | 00
| | ©,
ah ©
| | N
| am | | Mounting screw (M5)
an N
a |b
uu
|
Bottom View x This recessed part on the bottom surface
does not function as a bass reflex duct.
UNIT: mm SCALE: 1/6
TOA Corporation DWG No: GSRO1HA1—3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement