TOA | TS-920RC 1CE/3CU/4CE/-CN | manual | TOA TS-920RC 1CE/3CU/4CE/-CN User manual

TOA TS-920RC 1CE/3CU/4CE/-CN User manual
OPERATING INSTRUCTIONS
INFRARED CONFERENCE SYSTEM
TS-820RC/TS-920RC TIME SETTING TOOL
TABLE OF CONTENTS
1. SOFTWARE SUMMARY ............................... 2
2. INSTALLATION METHOD ............................ 3
3. CONNECTING THE TS-820RC/920RC
TO A PC ......................................................... 6
4. STARTING THE SOFTWARE ....................... 6
5. PERFORMING TIME SETTINGS .................. 7
6. TROUBLESHOOTING .................................. 9
1. SOFTWARE SUMMARY
This TS-820RC/TS-920RC Time Setting Tool is designed to connect the recording function-equipped TS820RC/920RC Central unit of the Infrared conference system to a PC and adjust the Central unit’s internal
clock.
Note
The TS-820RC/920RC is equipped with a clock function that allows time information to be affixed to recorded
files.
The following specifications must be met to install the software onto the computer.
Hardware Requirements
Display
USB
Software requirements
OS
Essential component
1366 x 768 pixels or more
USB 2.0 or greater
Windows 10 (32/64 bit)
.NET Framework 4.5
Note
Microsoft and Windows are the registered trademarks of Microsoft Corporation in the United States and other
countries.
2
2. INSTALLATION METHOD
2.1. Installation of TS-820RC/TS-920RC Time Setting Tool Software
The newest TS-820RC/TS-920RC Time Setting Tool software can be downloaded from the TOA product data
download site (https://www.toa-products.com/international/).
Click on the link above to access the download site, then enter the model number (TS-820RC or TS-920RC) in
the Model No. field to search for the specified software and download accordingly.
Follow the procedure below to install the software:
Step 1. Download the [TS-820RC/TS-920RC Time Setting Tool] from the TOA website (https://www.toaproducts.com/international/).
Step 2. Extract the downloaded software package.
Step 3. Double-click on the [setup.exe] file found in the extracted folder to start the installer.
4
Step 4. Click the [Next] button.
Install the software as instructed by the screen guide.
Note
To uninstall the software, use the [Program and Features] on the control panel.
3
2.2. Installation of USB Driver
The USB driver is required to be installed in order to connect the TS-820RC/920RC with the PC. There are 2
methods to install the driver.
Tip
The USB driver can occasionally be re-installed when a different USB port is used to connect to the receiver
from the one used for the initial driver installation. When this occurs, please wait till the Completion dialog is
displayed.
2.2.1. Automatic installation using Windows Update
Step 1. Make sure the PC is connected to the Internet.
Step 2. Using the USB cable, connect the TS-820RC/920RC to the PC. (See p. 6).
The PC will automatically connect to Windows Update and install the USB driver required to connect
the TS-820RC/920RC to the PC.
Note
The following screen may appear during driver installation.
2.2.2. Manual installation from downloaded file
If the driver cannot be installed using the above "Automatic installation using Windows Update," refer to the
following procedure for manual installation:
The downloaded TS-820RC/TS-920RC Time Setting Tool (See p. 3) folder contains the USB driver data.
Select the data to install the driver.
Step 1. Open the driver folder found in the downloaded file.
Step 2. Right click on an execution file called "xxxx_Setup.exe" and select "Run as administrator."
Step 3. Install the driver by following the instructions on the screen.
4
2.3. Check to Make Sure the USB Driver is Installed
The following procedure can be taken to make sure the USB driver is installed correctly.
Note
Please confirm that the TS-820RC/920RC is properly connected to the PC to check to see if the USB driver is
installed correctly.
(See the next page "CONNECTING THE TS-820RC/920RC TO A PC.")
Step 1. Start Device Manager.
Please read the instruction manual for the PC regarding how to start the Device Manager.
Step 2. Confirm that "USB Serial Port (COMx*)" is displayed in the list of displayed Ports (COM & LPT).
If USB Serial Port (COMx*) is displayed, the USB driver has been securely installed.
* A port number will be displayed in x.
2
5
3. CONNECTING THE TS-820RC/920RC TO A PC
Using a compatible USB cable, connect the TS-820RC/920RC’s USB external control port to one of the PC’s
USB ports.
• Use a typical (printer-type) USB 2.0 A-to-B cable.
• Set the External control terminal selection switch to the USB position.
USB cable
TS-820RC/920RC
[External control terminal selection switch]
4. STARTING THE SOFTWARE
Step: Double-click on the shortcut icon that appears on the desktop after installation is complete. [Shortcut icon]
The TS-820RC/TS-920RC Time Setting Tool will start up and the setting screen
displayed.
Tip
The Tool can also be started from the Windows Start menu.
The shortcut icon is created below the TOA folder in the start menu.
[Setting screen]
6
5. PERFORMING TIME SETTINGS
Perform time settings after selecting the COM port to which the TS-820RC/920RC is connected.
5.1. COM Port Selection
After the TS-820RC/TS-920RC Time Setting Tool is started, select the COM port.
1, 2
Step 1. Click on the [COM Ports] pull-down menu.
The usable port numbers are displayed.
Step 2. Select the port number corresponding to the one to
which the TS-820RC/920RC is connected.
Tips
• Which port number the Central unit is connected to can be
confirmed with the device manager. (See p. 5 "Check to
Make Sure the USB Driver is Installed.")
• Once selected, the same number will always be displayed
when the Time Setting Tool is restarted.
5.2. Time Settings
There are 2 methods for setting the time: one for synchronizing the Central unit’s clock with the PC’s current
date and time, and the other for setting an arbitrary time.
5.2.1. Synchronizing with a PC’s Current Date and Time
Step 1. Select [PC Current Time].
1
Step 2. Click the [Set Time] button.
The Central unit’s internal clock is synchronized with
the PC’s current time.
Step 3. Click the [Close] button to close the setting screen.
2
3
7
5.2.2. Setting to an Arbitrary Time
Step 1. Select [User Setting Time].
Step 2. Click the [Select Date] button.
A calendar is displayed.
1
[Calendar screen]
6
2
4
7
3
Step 3. Select a date on the calendar and click the OK button.
The calendar screen is closed.
Step 4. Click the [Select Time] button.
The time selection screen is displayed.
[Time selection screen]
5
Step 5. Set the “Hour," "Minute" and "Second" numbers and click the OK button.
The time selection screen is closed.
Step 6. Click the [Set Time] button.
The Central unit’s internal clock is set to the selected time.
Step 7. Click the [Close] button.
The setting screen is closed.
8
5.3. Confirming the TS-820RC/920RC’s Set Time
The time set to the TS-820RC/920RC can be easily confirmed.
Step: Click the [Get Unit Time] button.
The TS-820RC/920RC’s current time setting is displayed
on the left side of the button.
6. TROUBLESHOOTING
Symptom
Possible Cause
No COM ports are displayed on TS-820RC/920RC’s
COM Ports pull-down menu.
turned ON.
Remedy
power
not Turn ON TS-820RC/920RC’s power.
Incorrect USB cable connection.
Clicking on the [Set Time] Wrong COM port selected.
button results in display of
"Process failed" message.
Ensure correct USB cable connection.
(See p. 6 "CONNECTING THE
TS-820RC/920RC TO A PC.")
Select correct COM port number.
(See p. 7 "COM Port Selection.")
Clicking on the [Set Time] TS-820RC/920RC’s power switched
button results in display of "Port OFF after COM port selection.
is invalid" message.
USB cable disconnected after COM
port selection.
Turn ON TS-820RC/920RC’s power
and click on button again.
Ensure USB cable is correctly
connected and click on button again.
Even if time is changed, clock Loss of charge in TS-820RC/920RC’s Please contact the shop from
reverts to previous state.
backup battery.
which the TS-820RC/920RC was
purchased.
Traceability Information for Europe
Manufacturer:
TOA Corporation
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
URL: https://www.toa.jp/
201910
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising